Mark Hounschell [Fri, 25 Apr 2014 18:32:15 +0000 (14:32 -0400)]
staging: dgap: Add Mark Hounschell to maintainers list for dgap
Add Mark Hounschell to the MAINTAINERs list for the dgap driver
Signed-off-by: Mark Hounschell <markh@compro.net>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Engelmayer [Wed, 7 May 2014 19:43:37 +0000 (21:43 +0200)]
staging: vt6656: fix potential leak in vt6656_hostap_ioctl()
Commit
fb841d67 (staging: vt6656: don't leak 'param' in vt6656_hostap_ioctl()
when returning -EOPNOTSUPP) cleaned up direct returns in the ioctl switch
statement that leaked already allocated memory. Fix the same issue for
VIAWGET_HOSTAPD_SCAN_REQ and VIAWGET_HOSTAPD_MLME that are not supported by
this driver. Detected by Coverity - CID 144381.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 30 Apr 2014 20:31:13 +0000 (21:31 +0100)]
staging: vt6656: desh.h Remove unused macros and structures.
All are dead and of no use.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 30 Apr 2014 20:31:12 +0000 (21:31 +0100)]
staging: vt6656: rxtx: Remove unused uDMAIdx from driver.
Remove from functions and callers.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kepplinger [Tue, 6 May 2014 05:58:39 +0000 (07:58 +0200)]
staging: vt6656: make spin_lock_irq() human readable
Don't require FIRMWAREbDownload() to, first off, unlock a held lock.
Thus do all locking in main_usb.c and hold it for a insignificantly
shorter period of time. This makes the affected area significantly more
readable though.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guido Martínez [Sat, 19 Apr 2014 19:45:00 +0000 (16:45 -0300)]
staging: vt6655: fix checkpatch bracing issues
This patchs fixes tons of warnings such as:
WARNING: braces {} are not necessary for single statement blocks
#354: FILE: drivers/staging/vt6655/wmgr.c:354:
+ for (ii = 0; ii < WLAN_BSSID_LEN; ii++) {
+ pMgmt->abyDesireBSSID[ii] = 0xFF;
+ }
Please note: this patch only fixes bracing issues (and there is still a
lot to do); so if you run checkpatch it _will_ throw a lot of errors.
Use --test-only=braces
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guido Martínez [Sat, 19 Apr 2014 19:44:59 +0000 (16:44 -0300)]
staging: vt6655: remove dead code
Remove dead code in many places on this driver.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Klauser [Fri, 25 Apr 2014 09:53:58 +0000 (11:53 +0200)]
staging: vt6656: Use proper target pointer in memcpy()
The coverity scanner marked these two memcpy()'s as causing a buffer
overflow in CIDs 142743 and 142744. This is due the h_dest member of
struct ethhdr being used as a target (size ETH_ALEN) in memcpy, but the
copy is of size ETH_HLEN. However, the intention here seems to be to
copy the entire ethernet header. Make that clear by specifying the
proper destination buffer.
Also remove the unnecessary casts of the source argument.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Klauser [Fri, 25 Apr 2014 13:39:12 +0000 (15:39 +0200)]
staging: vt6656: Remove unnecesssary NULL check
pFifoHead points to tx_buffer->fifo_head which can never be NULL.
We also don't need to check for tx_buffer being NULL instead, since it
always points to ->Data of struct vnt_usb_send_context - the pointer to
which was checked before calling s_vGenerateTxParameter().
Silences a dereference before NULL check warning reported by the coverity
scanner in CID
1127221.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Del Piano [Fri, 25 Apr 2014 17:36:56 +0000 (14:36 -0300)]
Staging: vt6655: tether: fixed a brace coding style issue
Fixed a coding style issue.
Signed-off-by: Nicolas Del Piano <ndel314@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan [Mon, 12 May 2014 15:57:22 +0000 (16:57 +0100)]
goldfish: clean up the pipe driver 64bit ifdefs
Use the 64bit helper method to scrub most of the ifdefs from the driver. The
pipe reading has a funny case we can't scrub completely.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan [Mon, 12 May 2014 15:57:14 +0000 (16:57 +0100)]
goldfish: clean up the checkpatch warnings
Mostly spacing changes, also making the operations structure const
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan [Mon, 12 May 2014 15:57:05 +0000 (16:57 +0100)]
goldfish: clean up tty 64bit support
Use the helper we now have available.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan [Mon, 12 May 2014 15:56:56 +0000 (16:56 +0100)]
goldfish: clean up staging ifdefs
Use the write helpers and add an audio helper
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan [Mon, 12 May 2014 15:55:35 +0000 (16:55 +0100)]
goldfish: Allow 64bit builds
We can now enable the 64bit option for the Goldfish 64bit emulator.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jun Tian [Mon, 12 May 2014 15:55:26 +0000 (16:55 +0100)]
goldfish: enable 64-bit tty driver
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Kralevich [Mon, 12 May 2014 15:55:16 +0000 (16:55 +0100)]
goldfish_nand.c: remove length restrictions
Remove limitations on the size of a read / write request.
AFAIK, there's no consequence to allowing the upper layers
to specify different read / write sizes.
This is needed to support running ext4 on goldfish.
Bug: https://code.google.com/p/android/issues/detail?id=38561
Signed-off-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Octavian Purdila [Mon, 12 May 2014 15:55:05 +0000 (16:55 +0100)]
goldfish: add support for 64bit to the virtual bus
This patchs adds a new register to pass the upper 32bits for the
device name address when running in 64bit mode.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jun Tian [Mon, 12 May 2014 15:54:57 +0000 (16:54 +0100)]
goldfish: fix kernel panic when using multiple adb connection
When using multiple adb on 64 bit kernel to transfer data,
the goldfish pipe interrupt will crash the kernel.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jun Tian [Mon, 12 May 2014 15:54:46 +0000 (16:54 +0100)]
goldfish: 64-bit pipe driver for goldfish platform
Support 64-bit channel and address for the goldfish pipe driver.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Brian Wood <brian.j.wood@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Engelmayer [Wed, 7 May 2014 19:21:58 +0000 (21:21 +0200)]
staging: rtl8723au: Remove unused pointer in rtw_wdev_free()
Pointer 'pwdev_priv' in function rtw_wdev_free() is unused - thus remove it.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 9 May 2014 13:04:31 +0000 (15:04 +0200)]
staging: rtl8723au: fix some confusing indenting
The break and the "unknown++" are at the same indent level so my static
checker complains. The if statement should be indented more.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:30 +0000 (15:04 +0200)]
staging: rtl8723au: Remove unused struct odm_ra_info
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:29 +0000 (15:04 +0200)]
staging: rtl8723au: Since struct odm_sta_info isn't used, remove it completely
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:28 +0000 (15:04 +0200)]
staging: rtl8723au: Remove unused variable IOTPeer
For bizarre reason we have unused variables IOTPeer both in struct
sta_info and struct odm_sta_info.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:27 +0000 (15:04 +0200)]
staging: rtl8723au: struct odm_mac_info isn't used
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:26 +0000 (15:04 +0200)]
staging: rtl8723au: struct phy_info and struct odm_phy_info are identical
We don't need two copies of the same struct, it just leads to
pointless typecasts.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:25 +0000 (15:04 +0200)]
staging: rtl8723au: Remove empty *_free_xmit_priv() and friends
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:24 +0000 (15:04 +0200)]
staging: rtl8723au: Eliminate no-op function rtl8723au_init_recvbuf()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:23 +0000 (15:04 +0200)]
staging: rtl8723au: Remove another unused queue from struct recv_priv
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:22 +0000 (15:04 +0200)]
staging: rtl8723au: Remove some unused lists from struct sta_priv
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:21 +0000 (15:04 +0200)]
staging: rtl8723au: rtw_pwrctrl.c: Reduce spaghettification
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:20 +0000 (15:04 +0200)]
staging: rtl8723au: pattrib->priority can't be > 15, no need for CHKBIT()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:19 +0000 (15:04 +0200)]
staging: rtl8723au: qos_asm23a(): Don't pass through an invalid priority
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:18 +0000 (15:04 +0200)]
staging: rtl8723au: set_qos() keep userpriority in a u8
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:17 +0000 (15:04 +0200)]
staging: rtl8723au: Another case of missing 'tid' bounds checking.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:16 +0000 (15:04 +0200)]
staging: rtl8723au: 'keyid' is always 0-3, no need for CHKBIT()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:15 +0000 (15:04 +0200)]
staging: rtl8723au: No need for CHKBIT since 16 + 12 is still < 32
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:14 +0000 (15:04 +0200)]
staging: rtl8723au: tid is 4 bits, so we need a 16 bit value to hold a bitmap
Remove unused add_enable_bitmap and candidate_tid_bitmap from struct
mlme_ext_info.
In addition we don't need to use CHKBIT when we know we are dealing
with a value in the range 0-15.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:13 +0000 (15:04 +0200)]
staging: rtl8723au: Remove local #define BIT()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:12 +0000 (15:04 +0200)]
staging: rtl8723au: Call c2h_handler_8723a() directly instead of via HAL interface
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:11 +0000 (15:04 +0200)]
staging: rtl8723au: The driver only has one c2h_id_filter
Since we only have one function for this, there is no point in keeping
the HAL silliness.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:10 +0000 (15:04 +0200)]
staging: rtl8723au: c2h_evt_hdl() is always called with 3rd argument = NULL
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:09 +0000 (15:04 +0200)]
staging: rtl8723au: Declare c2h_evt_hdl static
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:08 +0000 (15:04 +0200)]
staging: rtl8723au: Move rtw_do_join23a() prototype to rtw_ioctl_set.h
rtw_do_join23a() is declared in rtw_ioctl_set.c so move the prototype
to it's correct place, and remove duplicate protoype from rtw_mlme.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:07 +0000 (15:04 +0200)]
staging: rtl8723au: Move {WPA,RSN}_TKIP_CIPHER23A to rtw_wlan_util.c and mark them static
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:06 +0000 (15:04 +0200)]
staging: rtl8723au: Move REALTEK96B_IE23A to rtw_mlme_ext.c and mark it static
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:05 +0000 (15:04 +0200)]
staging: rtl8723au: Remove unused ADPT_{FMT,AGR} macros
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:04 +0000 (15:04 +0200)]
staging: rtl8723au: Get rid of FUNC_NDEV_{FMT,ARG}
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:03 +0000 (15:04 +0200)]
staging: rtl8723au: Remove FUNC_ADPT_{FMT,ARG}
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:02 +0000 (15:04 +0200)]
staging: rtl8723au: Get rid of NDEV_FMT/NDEV_ARG macros
Silly use-once macros that simply obfuscates the code.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:01 +0000 (15:04 +0200)]
staging: rtl8723au: Remove some unused prototypes
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:04:00 +0000 (15:04 +0200)]
staging: rtl8723au: Eliminate RTW_STATUS_CODE23a()
Inline the parsing of status codes. Long term we should pass back the
proper status codes and get rid of the ugly _FAIL/_SUCCESS mess. This
is one small step in that direction.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:59 +0000 (15:03 +0200)]
staging: rtl8723au: Eliminate _rtw_queue_empty23a()
This was just a silly wrapper around list_empty()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:58 +0000 (15:03 +0200)]
staging: rtl8723au: rtw_free_recvframe23a() is always passed precvpriv->free_recv_queue
No point in passing in the pointer to free_recv_queue, when we always
pass in the same value.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:57 +0000 (15:03 +0200)]
staging: rtl8723au: Remove unused semaphore 'allrxreturnevt'
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:56 +0000 (15:03 +0200)]
staging: rtl8723au: Remove ugly vmalloc() wrappers
Finally with the last user converted, get rid of ugly vmalloc wrappers
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:55 +0000 (15:03 +0200)]
staging: rtl8723au: Use kmalloc instead of vmalloc to allocate recv_frame pool
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:54 +0000 (15:03 +0200)]
staging: rtl723au: Remove some obsolete misleading comments
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:53 +0000 (15:03 +0200)]
stating: rtl8723au: Use kmalloc instead of vmalloc to allocate pool of xmit_frame_ext
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:52 +0000 (15:03 +0200)]
staging: rtl8723au: Use kmalloc() rather than vmalloc() to allocate xmit_frames
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:51 +0000 (15:03 +0200)]
staging: rtl8723au: Declare rtw_alloc_xmitframe() static
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Engelmayer [Fri, 9 May 2014 13:03:50 +0000 (15:03 +0200)]
staging: rtl8723au: fix potential leak in update_bcn_wps_ie()
Fix a potential leak in the error path of function update_bcn_wps_ie().
Move the affected input verification to the beginning of the function so
that it may return directly without leaking already allocated memory.
Detected by Coverity - CID
1077718.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:49 +0000 (15:03 +0200)]
staging: rtl8723au: Add GFP argument to rtw_alloc_stainfo23a()
No need to allocate GFP_ATOMIC when we don't need to.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:48 +0000 (15:03 +0200)]
staging: rtl8723au: Use kernel memory allocator for sta_priv allocations
The kernel has a great memory allocator, use it instead of hacking up
something in the driver.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:47 +0000 (15:03 +0200)]
staging: rtl8723au: Eliminate stainfo_by_offset spaghetti
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:46 +0000 (15:03 +0200)]
staging: rtl8723au: add GFP argument to rtw_alloc_network()
This allows us to use GFP_KERNEL when calling from a work handler.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:45 +0000 (15:03 +0200)]
staging: rtl8723au: rtw_createbss_cmd23a_callback(): Relax holding of pmlmepriv->lock
We only really need to hold pmlmepriv->lock while calling
rtw_indicate_connect23a(). rtw_get_stainfo23a() and
rtw_alloc_stainfo23a() rely on pstapriv->sta_hash_lock and the non
WIFI_AP_STATE path relies on pmlmepvi->scanned_queue.lock, except we
need to used clr_fwstate() instead of _clr_fwstate_().
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:44 +0000 (15:03 +0200)]
staging: rtl8723au: rtw_alloc_stainfo23a(): Remove unused variable tmp_aid
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:43 +0000 (15:03 +0200)]
staging: rtl8723au: rtw_sta_mgt.c: Fix some formatting badness
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:42 +0000 (15:03 +0200)]
staging: rtl8723au: Get rid of second set of custom error codes
One set of custom error codes for the driver should more than
suffice. This allows us to get rid of odm_types.h as well.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:41 +0000 (15:03 +0200)]
staging: rtl8723au: Remove some unused clutter from odm_types.h
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:40 +0000 (15:03 +0200)]
staging: rtl8723au: Remove unused struct rtl8723a_priv
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:39 +0000 (15:03 +0200)]
staging: rtl8723au: Remove a bunch of unused clutter from the ODM code
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:38 +0000 (15:03 +0200)]
staging: rtl8723au: Remove unused ODM spin lock functions
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:37 +0000 (15:03 +0200)]
staging: rtl8723au: Remove unused ODM malloc/free functions
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:36 +0000 (15:03 +0200)]
staging: rtl8723au: Use random ethaddr if EEPROM address is corrupted
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:35 +0000 (15:03 +0200)]
staging: rtl8723au: wifi.h: remove more unused #defines
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:34 +0000 (15:03 +0200)]
staging: rtl8723au: Use struct ieee80211_pspoll to obtain 'aid'
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:33 +0000 (15:03 +0200)]
staging: rtl8723au: Fold get_hdr_bssid() into update_recvframe_phyinfo()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:32 +0000 (15:03 +0200)]
staging: rtl8723au: update_recvframe_phyinfo(): Don't set variables twice
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:31 +0000 (15:03 +0200)]
staging: rtl8723au: validate_recv_data_frame() use fctl knowledge to obtain bssid
Use the knowledge we already have from parsing the TODS/FROMDS bits in
hdr->frame_control to obtain the bssid.
Note that get_hdr_bssid() would never return NULL as handling 4
combinations of a 2 bit word leaves little space for falling through
to the 'default' value.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:30 +0000 (15:03 +0200)]
staging: rtl8723au: Remove to_fr_ds packet attribute
This is only used in one place - do the work there properly.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:29 +0000 (15:03 +0200)]
staging: rtl8723au: Declare validate_recv_*_frame() static
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:28 +0000 (15:03 +0200)]
staging: rtl8723au: Remove redundant check
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:27 +0000 (15:03 +0200)]
staging: rtl8723au: rtw_wlan_util.c: Clean up the code
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:26 +0000 (15:03 +0200)]
staging: rtl8723au: rtl8723a_recv.h: Don't put parenthesis around constants
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:25 +0000 (15:03 +0200)]
staging: rtl8723au: Remove a bunch of always true #ifdefs
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:24 +0000 (15:03 +0200)]
staging: rtl8723au: Remove a pile of unused firmware image file names
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:23 +0000 (15:03 +0200)]
staging: rtl8723au: rtw_ioctl_set.h: Remove unused struct bssid_info
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:22 +0000 (15:03 +0200)]
staging: rtl8723au: Remove unused rtw_ioctl.h
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:21 +0000 (15:03 +0200)]
staging: rtl8723au: Eliminate struct qos_priv
Having struct qos_priv containing a single integer, and carrying a
dedicated header file for it, is just plain silly. Move the integer
into struct mlme_priv, which is the only place qos_priv was used
anyway, and get rid of the header file.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:20 +0000 (15:03 +0200)]
staging: rtl8723au: rtw_event.h remove some unused structs and random blank lines
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:19 +0000 (15:03 +0200)]
staging: rtl8723au: Make event callbacks take a const u8 *
This avoids an ugly cast in mlme_evt_hdl23a()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:18 +0000 (15:03 +0200)]
staging: rtl8723au: Fix endian abnormality in mlme_evt_hdl23a()
Every other place uses C2HEvent_Header() for events. Given the struct
is endian dependant, use it here too to retrieve data from the parm
buffer.
Note the length field is not set/read in le order - question is
whether it's simply an opaque field?
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 9 May 2014 13:03:17 +0000 (15:03 +0200)]
staging: rtl8723au: Move data byte-swap closer to register access
This makes sparse happy
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:16 +0000 (15:03 +0200)]
staging: rtl8723au: Remove unused + write-only entries from struct evt_priv
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:15 +0000 (15:03 +0200)]
staging: rtl8723au: Get rid of ugly cbuf interface
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:14 +0000 (15:03 +0200)]
staging: rtl8723au: Use workqueue to handle interrupt complete processing
Split the old work handler into a workqueue for processing
usb_read_interrupt_complete() events that require more than ust
clearing the event, and leave the old handler to just handle event
clearing.
This means we can get rid of the hacks with magic pointers to
determine what actions needs to be taken in the work handler, and
as an extra bonus obsoletes the bizarre cbuf code.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 9 May 2014 13:03:13 +0000 (15:03 +0200)]
staging: rtl8723au: Name cmd workqueue appropriately to allow for more workqueues
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / openwrt / staging / blogic.git / log