openwrt/staging/chunkeey.git
10 years agokernel/3.6: remove yaffs support
Gabor Juhos [Mon, 16 Dec 2013 07:42:42 +0000 (07:42 +0000)]
kernel/3.6: remove yaffs support

It is not used by any platform.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39082

10 years agokernel/3.3: remove yaffs support
Gabor Juhos [Mon, 16 Dec 2013 07:42:41 +0000 (07:42 +0000)]
kernel/3.3: remove yaffs support

It is not used by any platform.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39081

10 years agoar71xx/mikrotik: disable unused MTD options
Gabor Juhos [Mon, 16 Dec 2013 07:39:22 +0000 (07:39 +0000)]
ar71xx/mikrotik: disable unused MTD options

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39080

10 years agoar71xx: add dummy rle_decode function if CONFIG_RLE_DECOMPRESS is not set
Gabor Juhos [Mon, 16 Dec 2013 07:37:31 +0000 (07:37 +0000)]
ar71xx: add dummy rle_decode function if CONFIG_RLE_DECOMPRESS is not set

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39079

10 years agoar71xx: add userspace support for WD My Net N750
Gabor Juhos [Mon, 16 Dec 2013 07:16:43 +0000 (07:16 +0000)]
ar71xx: add userspace support for WD My Net N750

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
[juhosg: remove the image generation part until the ethernet
         switch issue is resolved]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39078

10 years agoar71xx: add kernel support for WD My Net N750
Gabor Juhos [Mon, 16 Dec 2013 07:16:42 +0000 (07:16 +0000)]
ar71xx: add kernel support for WD My Net N750

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
[juhosg: use a separate patch for kernel changes]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39077

10 years agogeneric: ar8216: Enable jumbo frames on AR8327 by default
Gabor Juhos [Sun, 15 Dec 2013 22:18:04 +0000 (22:18 +0000)]
generic: ar8216: Enable jumbo frames on AR8327 by default

This patch enables jumbo frames on AR8327 switch by default.
I have tested it on TP-Link TL-WDR3600.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39076

10 years agoar71xx: build image for the TP-Link TL-WA901ND v3 board
Gabor Juhos [Sun, 15 Dec 2013 21:34:20 +0000 (21:34 +0000)]
ar71xx: build image for the TP-Link TL-WA901ND v3 board

Based-on: http://patchwork.openwrt.org/patch/4507/
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39075

10 years agoar71xx: add user-space support for the TP-Link TL-WA901ND v3 board
Gabor Juhos [Sun, 15 Dec 2013 21:34:19 +0000 (21:34 +0000)]
ar71xx: add user-space support for the TP-Link TL-WA901ND v3 board

Based-on: http://patchwork.openwrt.org/patch/4508/
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39074

10 years agoar71xx: add kernel support for the TL-WA901ND v3 board
Gabor Juhos [Sun, 15 Dec 2013 21:34:18 +0000 (21:34 +0000)]
ar71xx: add kernel support for the TL-WA901ND v3 board

Based-on: http://patchwork.openwrt.org/patch/4506/
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39073

10 years agoar71xx: move TL-WA801ND v2 setup code
Gabor Juhos [Sun, 15 Dec 2013 21:34:17 +0000 (21:34 +0000)]
ar71xx: move TL-WA801ND v2 setup code

The TL-WA801ND v2 board has only one LAN port which makes
it more similar to the TL-WR[78]50RE devices. Move the
board setup code into the mach-tl-wax50re.c file.

Based-on: http://patchwork.openwrt.org/patch/4506/
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39072

10 years agoar71xx: refactor TL-WAx50RE setup code
Gabor Juhos [Sun, 15 Dec 2013 21:34:15 +0000 (21:34 +0000)]
ar71xx: refactor TL-WAx50RE setup code

This way it is a bit easier to add other TP-LINK devices based on the
Atheros AP123 reference board with one LAN port.

Based-on: http://patchwork.openwrt.org/patch/4506/
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39071

10 years agoppl: update to 1.1
Luka Perkov [Sun, 15 Dec 2013 21:07:34 +0000 (21:07 +0000)]
ppl: update to 1.1

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39068

10 years agocloog: update to 0.18.1
Luka Perkov [Sun, 15 Dec 2013 21:07:32 +0000 (21:07 +0000)]
cloog: update to 0.18.1

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39067

10 years agofirmware-utils/mkplinkfw: add TL-WA801ND v2 support
Gabor Juhos [Sun, 15 Dec 2013 20:39:13 +0000 (20:39 +0000)]
firmware-utils/mkplinkfw: add TL-WA801ND v2 support

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Patchwork: http://patchwork.openwrt.org/patch/4503/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39066

10 years agoar71xx: build firmware image for the TL-WA801ND v2
Gabor Juhos [Sun, 15 Dec 2013 20:39:12 +0000 (20:39 +0000)]
ar71xx: build firmware image for the TL-WA801ND v2

Patch to add the profile for the TP-LINK WA801ND v2

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Patchwork: http://patchwork.openwrt.org/patch/4502/
[juhosg: change subject]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39065

10 years agoar71xx: add user space support for the TL-WA801ND v2
Gabor Juhos [Sun, 15 Dec 2013 20:39:11 +0000 (20:39 +0000)]
ar71xx: add user space support for the TL-WA801ND v2

Patch to add the user space support for the TL-WA801ND v2

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Patchwork: http://patchwork.openwrt.org/patch/4501/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39064

10 years agoar71xx: add kernel support for the TL-WA801ND v2 board
Gabor Juhos [Sun, 15 Dec 2013 20:39:10 +0000 (20:39 +0000)]
ar71xx: add kernel support for the TL-WA801ND v2 board

Patch to add kernel support for the TP-LINK WA801ND v2

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Patchwork: http://patchwork.openwrt.org/patch/4500/
[juhosg:
  - the TL-WA801ND v2 does not have a sliding switch, it uses a push button
    for WPS instead. Use the tl_mr3420v2_gpio_keys array to reflect that,
  - rename kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39063

10 years agoath9k: fix interrupt storms on AR913x
Felix Fietkau [Sun, 15 Dec 2013 20:23:00 +0000 (20:23 +0000)]
ath9k: fix interrupt storms on AR913x

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39062

10 years agoConvert DHCP->6rd and DHCPv6->DS-Lite autoconfig to dynamic interface
Steven Barth [Sun, 15 Dec 2013 19:38:53 +0000 (19:38 +0000)]
Convert DHCP->6rd and DHCPv6->DS-Lite autoconfig to dynamic interface

SVN-Revision: 39061

10 years agobrcm47xx: deactivate early printk support
Hauke Mehrtens [Sun, 15 Dec 2013 19:19:16 +0000 (19:19 +0000)]
brcm47xx: deactivate early printk support

This breaks some devices where the serial console is not at port 0 but
somewhere else.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39060

10 years agokernel: update kernel 3.10 to 3.10.24
Hauke Mehrtens [Sun, 15 Dec 2013 19:16:30 +0000 (19:16 +0000)]
kernel: update kernel 3.10 to 3.10.24

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39059

10 years agoodhcp6c: add source routing support
Steven Barth [Sun, 15 Dec 2013 19:10:20 +0000 (19:10 +0000)]
odhcp6c: add source routing support

SVN-Revision: 39058

10 years agouhttpd: don't process ubus_* and lua_* options if corresponding plugin is not install...
Jo-Philipp Wich [Sun, 15 Dec 2013 15:32:37 +0000 (15:32 +0000)]
uhttpd: don't process ubus_* and lua_* options if corresponding plugin is not installed (#14618)

SVN-Revision: 39057

10 years agobison: update to 3.0.2
Luka Perkov [Sun, 15 Dec 2013 03:59:49 +0000 (03:59 +0000)]
bison: update to 3.0.2

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39056

10 years agoupgrade 3.12 targets to 3.12.5
Imre Kaloz [Sat, 14 Dec 2013 17:37:14 +0000 (17:37 +0000)]
upgrade 3.12 targets to 3.12.5

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39055

10 years agoath9k: merge another round of cleanups and fixes submitted to linux-wireless
Felix Fietkau [Sat, 14 Dec 2013 17:07:08 +0000 (17:07 +0000)]
ath9k: merge another round of cleanups and fixes submitted to linux-wireless

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39054

10 years agoath9k: merge an interrupt processing fix for AR5008-AR9002
Felix Fietkau [Sat, 14 Dec 2013 16:40:27 +0000 (16:40 +0000)]
ath9k: merge an interrupt processing fix for AR5008-AR9002

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39053

10 years agokernel: move BLKCIPHER into crypto-core to avoid pulling in crypto-manager for arc4...
Felix Fietkau [Sat, 14 Dec 2013 16:40:24 +0000 (16:40 +0000)]
kernel: move BLKCIPHER into crypto-core to avoid pulling in crypto-manager for arc4 (used by mac80211)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39052

10 years agodrop the bootscript, new u-boots won't need it
Imre Kaloz [Sat, 14 Dec 2013 16:29:35 +0000 (16:29 +0000)]
drop the bootscript, new u-boots won't need it

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39051

10 years agonetifd: update to the latest version, adds a revert of the link state handling patche...
Felix Fietkau [Sat, 14 Dec 2013 14:59:05 +0000 (14:59 +0000)]
netifd: update to the latest version, adds a revert of the link state handling patches which caused regressions in combination with wifi devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39050

10 years agobuild: speed up kernel symbol export stripping
Felix Fietkau [Sat, 14 Dec 2013 13:14:44 +0000 (13:14 +0000)]
build: speed up kernel symbol export stripping

GNU grep has a high per-expression setup overhead when compiling regular
expressions. Use -F to force it to interpret the input as fixed strings,
which is much faster (fraction of a second instead of multiple minutes).

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39049

10 years agoopenssl: Support multi-threaded applications
Felix Fietkau [Sat, 14 Dec 2013 10:19:48 +0000 (10:19 +0000)]
openssl: Support multi-threaded applications

Allow multi-threaded applications to work properly by
removing the "no-threads" flag that is enabled by default.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 39048

10 years agousbmode: add an init script to switch devices that show up too early for the hotplug...
Felix Fietkau [Fri, 13 Dec 2013 16:43:15 +0000 (16:43 +0000)]
usbmode: add an init script to switch devices that show up too early for the hotplug script

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39047

10 years agonetifd: prevent an unnecessary restart of netifd-managed wifi interfaces at boot...
Felix Fietkau [Fri, 13 Dec 2013 16:43:11 +0000 (16:43 +0000)]
netifd: prevent an unnecessary restart of netifd-managed wifi interfaces at boot time

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39046

10 years agoscripts/download.pl: prefer the GNU mirror redirect over the primary site (#14603)
Felix Fietkau [Fri, 13 Dec 2013 16:43:07 +0000 (16:43 +0000)]
scripts/download.pl: prefer the GNU mirror redirect over the primary site (#14603)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39045

10 years agofix jffs2 with internal libgcc and switch omap4 to ext4
Imre Kaloz [Fri, 13 Dec 2013 16:38:43 +0000 (16:38 +0000)]
fix jffs2 with internal libgcc and switch omap4 to ext4

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39044

10 years agoiw: reduce size and make the phy dump output more readable
Felix Fietkau [Fri, 13 Dec 2013 11:02:05 +0000 (11:02 +0000)]
iw: reduce size and make the phy dump output more readable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39041

10 years agoralink: add mt7621 support
John Crispin [Fri, 13 Dec 2013 10:53:34 +0000 (10:53 +0000)]
ralink: add mt7621 support

there are still various missing pieces for full support.

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39040

10 years agoopkg: do not add blank "Provides:" fields to package metadata
Felix Fietkau [Fri, 13 Dec 2013 10:40:26 +0000 (10:40 +0000)]
opkg: do not add blank "Provides:" fields to package metadata

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39039

10 years agobuild: remove SourceFile and SourceURL from opkg metadata - they are useless without...
Felix Fietkau [Fri, 13 Dec 2013 10:40:19 +0000 (10:40 +0000)]
build: remove SourceFile and SourceURL from opkg metadata - they are useless without the corresponding openwrt package directory

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39038

10 years agoadd a default profile file
Imre Kaloz [Thu, 12 Dec 2013 10:08:15 +0000 (10:08 +0000)]
add a default profile file

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39037

10 years ago/sbin/wifi: reload network/wireless on wifi restart
Felix Fietkau [Wed, 11 Dec 2013 19:48:19 +0000 (19:48 +0000)]
/sbin/wifi: reload network/wireless on wifi restart

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39036

10 years agonetifd: fix crashes triggered by adding/removing wireless devices on reload
Felix Fietkau [Wed, 11 Dec 2013 18:23:52 +0000 (18:23 +0000)]
netifd: fix crashes triggered by adding/removing wireless devices on reload

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39035

10 years agoimx6: add canbus support for Ventana boards
Luka Perkov [Wed, 11 Dec 2013 10:56:11 +0000 (10:56 +0000)]
imx6: add canbus support for Ventana boards

GW5400, GW5300, and GW5200 have CAN bus option.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39034

10 years agoimx6: add flexcan support
Luka Perkov [Wed, 11 Dec 2013 10:56:09 +0000 (10:56 +0000)]
imx6: add flexcan support

backport upstream changes to 3.10:
 - 0060-flexcan.patch:
   - add flexcan pinctrl and devicetree config
 - 0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch
   - fix a clock issue
 - 0062-ARM-i.MX6q-fix-the-wrong-parent-of-can_root-clock.patch
   - fix a clock issue

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39033

10 years agokernel: add CAN modules
Luka Perkov [Wed, 11 Dec 2013 10:56:08 +0000 (10:56 +0000)]
kernel: add CAN modules

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39032

10 years agomac80211: add missing set_default to fix stray "radio0: sh: bad number" messages
Jo-Philipp Wich [Tue, 10 Dec 2013 16:24:52 +0000 (16:24 +0000)]
mac80211: add missing set_default to fix stray "radio0: sh: bad number" messages

SVN-Revision: 39028

10 years agohostapd: fix short_preamble option
Jo-Philipp Wich [Tue, 10 Dec 2013 16:24:48 +0000 (16:24 +0000)]
hostapd: fix short_preamble option

SVN-Revision: 39027

10 years agolibevent2: Configure with --disable-debug-mode
John Crispin [Mon, 9 Dec 2013 18:26:58 +0000 (18:26 +0000)]
libevent2: Configure with --disable-debug-mode

Saves around 10K.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 39025

10 years agoubox: fix logging support. the initial connect failed
John Crispin [Mon, 9 Dec 2013 18:24:30 +0000 (18:24 +0000)]
ubox: fix logging support. the initial connect failed

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39024

10 years agoprocd: update procd, add ulimit support
John Crispin [Mon, 9 Dec 2013 17:38:19 +0000 (17:38 +0000)]
procd: update procd, add ulimit support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39023

10 years agoubox: fix up pidcount handling inside log.init
John Crispin [Mon, 9 Dec 2013 17:29:44 +0000 (17:29 +0000)]
ubox: fix up pidcount handling inside log.init

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39022

10 years agogpio-button-hotplug: add irq mode to driver
John Crispin [Mon, 9 Dec 2013 17:29:39 +0000 (17:29 +0000)]
gpio-button-hotplug: add irq mode to driver

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39021

10 years agonetifd: enable coredumps again
John Crispin [Mon, 9 Dec 2013 17:29:34 +0000 (17:29 +0000)]
netifd: enable coredumps again

got broken due procd startup. Requires procd resource limit patch.

Signed-off-by: Ulrich Weber <uw@xyne.com>
SVN-Revision: 39020

10 years agoralink: add TSO
John Crispin [Mon, 9 Dec 2013 17:29:29 +0000 (17:29 +0000)]
ralink: add TSO

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39019

10 years agoralink: fix typo in gpio irq handling
John Crispin [Mon, 9 Dec 2013 17:29:24 +0000 (17:29 +0000)]
ralink: fix typo in gpio irq handling

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39018

10 years agoralink: add mt7620a gdma info to dtsi
John Crispin [Mon, 9 Dec 2013 17:29:19 +0000 (17:29 +0000)]
ralink: add mt7620a gdma info to dtsi

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39017

10 years agoralink: add asoc modules
John Crispin [Mon, 9 Dec 2013 17:29:14 +0000 (17:29 +0000)]
ralink: add asoc modules

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39016

10 years agoralink: add partially working asoc driver. codec is not fully functional yet
John Crispin [Mon, 9 Dec 2013 17:29:08 +0000 (17:29 +0000)]
ralink: add partially working asoc driver. codec is not fully functional yet

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39015

10 years agoralink: add helper that identifies the mt7620 ECO
John Crispin [Mon, 9 Dec 2013 17:29:03 +0000 (17:29 +0000)]
ralink: add helper that identifies the mt7620 ECO

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39014

10 years agoralink: add dma engine support
John Crispin [Mon, 9 Dec 2013 17:28:43 +0000 (17:28 +0000)]
ralink: add dma engine support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39013

10 years agoimx6: add support for GW53xx
Luka Perkov [Mon, 9 Dec 2013 11:30:23 +0000 (11:30 +0000)]
imx6: add support for GW53xx

The Gateworks GW53xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 * i.MX6DL
 * NAND FLASH
 * 4x PCIe
 * 4x USB EHCI (1x front-panel; 3x PCIe sockets)
 * 1x USB OTG
 * 1x uSD
 * LVDS connector (VLDS for display, PWM/GPIO for backlight, i2c for touch)
 * HDMI Audio/Video out
 * Analog Video in
 * Digital IO
 * Gateworks System Controller
 * Accelerometer
 * Canbus
 * Optional GPS
 * Industrial temp (-40C to +85C)
 * DC input voltage 8 to 42V (Passive PoE and 802.3af)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39012

10 years agoimx6: add DMA/SDMA support for 3.12
Luka Perkov [Mon, 9 Dec 2013 11:30:22 +0000 (11:30 +0000)]
imx6: add DMA/SDMA support for 3.12

DMA and SDMA support are needed for ssi based audio.  Note that the sdma
firmware is no longer required for ssi audio.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39011

10 years agoimx6: drop upstreamed patch
Luka Perkov [Mon, 9 Dec 2013 11:30:20 +0000 (11:30 +0000)]
imx6: drop upstreamed patch

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39010

10 years agokernel: added defines for 3.12
Luka Perkov [Mon, 9 Dec 2013 11:30:19 +0000 (11:30 +0000)]
kernel: added defines for 3.12

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39009

10 years agokernel: module updates for 3.12
Luka Perkov [Mon, 9 Dec 2013 11:30:18 +0000 (11:30 +0000)]
kernel: module updates for 3.12

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39008

10 years agoconfig: add KERNEL_DYNAMIC_DEBUG option
Luka Perkov [Mon, 9 Dec 2013 11:30:16 +0000 (11:30 +0000)]
config: add KERNEL_DYNAMIC_DEBUG option

Useful when debugging kernel which uses this infrastructure, for
example ubi/ubifs.

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39007

10 years agobase-files: fix whitespaces
Luka Perkov [Mon, 9 Dec 2013 11:30:14 +0000 (11:30 +0000)]
base-files: fix whitespaces

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39006

10 years agohostapd: properly parse wmm and hidden uci options (#14589)
Jo-Philipp Wich [Sun, 8 Dec 2013 20:51:21 +0000 (20:51 +0000)]
hostapd: properly parse wmm and hidden uci options (#14589)

SVN-Revision: 39005

10 years agonetifd: update to the latest version, adds tunnel fixes by Hans Dedecker and adds...
Felix Fietkau [Sun, 8 Dec 2013 18:00:05 +0000 (18:00 +0000)]
netifd: update to the latest version, adds tunnel fixes by Hans Dedecker and adds back support for multiple networks per wifi-iface

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39004

10 years agomac80211: fix using custom wifi-iface ifname option with netifd
Felix Fietkau [Sun, 8 Dec 2013 18:00:01 +0000 (18:00 +0000)]
mac80211: fix using custom wifi-iface ifname option with netifd

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39003

10 years agomac80211: merge an ibss dfs locking fix
Felix Fietkau [Sun, 8 Dec 2013 14:48:34 +0000 (14:48 +0000)]
mac80211: merge an ibss dfs locking fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39002

10 years agoath9k: merge initval and tx gain table updates, calibration fixes
Felix Fietkau [Sun, 8 Dec 2013 14:48:30 +0000 (14:48 +0000)]
ath9k: merge initval and tx gain table updates, calibration fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39001

10 years agomac80211: refresh patch
Felix Fietkau [Sun, 8 Dec 2013 14:48:25 +0000 (14:48 +0000)]
mac80211: refresh patch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39000

10 years agogeneric: workaround arptables arpt_arp structure padding issue (#14577)
Jo-Philipp Wich [Fri, 6 Dec 2013 15:42:35 +0000 (15:42 +0000)]
generic: workaround arptables arpt_arp structure padding issue (#14577)

Linaro GCC 4.6-2013.05 incorrectly pads the arpt_arp structure on
at least the ar71xx target, resulting in a two bytes shorter struct
in the kernel compared to what arptables userspace expects.

When comparing sizeof(struct arpt_arp) in kernel and userspace, the
former yields 162 byte, while the latter is 164 byte.

As a consequence, the subsequent target_offset and next_offset
members of the parent arpt_entry structure contain invalid values
when processed by the arptables binary, leading to bad memory
accesses in the populate_cache() procedure, subsequently causing a
segfault.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38999

10 years agogeneric: fix occasional "execvp: /bin/sh: Argument list too long" is kernel header...
Jo-Philipp Wich [Fri, 6 Dec 2013 15:37:55 +0000 (15:37 +0000)]
generic: fix occasional "execvp: /bin/sh: Argument list too long" is kernel header install phase (#12907)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38998

10 years agoadd support for the wl18xx, split wlcore from wl12xx
Imre Kaloz [Fri, 6 Dec 2013 14:07:13 +0000 (14:07 +0000)]
add support for the wl18xx, split wlcore from wl12xx

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38997

10 years agoodhcpd/6c: Add config menu for prefix class ext.
Steven Barth [Thu, 5 Dec 2013 12:17:09 +0000 (12:17 +0000)]
odhcpd/6c: Add config menu for prefix class ext.

SVN-Revision: 38996

10 years agoath9k: fix length handling of unaggregated frames (might resolve some rts/cts issues)
Felix Fietkau [Wed, 4 Dec 2013 22:59:36 +0000 (22:59 +0000)]
ath9k: fix length handling of unaggregated frames (might resolve some rts/cts issues)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38995

10 years agoodhcpd: Fix ubus integration
Steven Barth [Wed, 4 Dec 2013 13:14:27 +0000 (13:14 +0000)]
odhcpd: Fix ubus integration

SVN-Revision: 38994

10 years agomac80211: fix ad-hoc network setup with netifd (#14564)
Felix Fietkau [Tue, 3 Dec 2013 16:22:56 +0000 (16:22 +0000)]
mac80211: fix ad-hoc network setup with netifd (#14564)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38993

10 years agonetifd: update to the latest version, improves wireless status output and fixes some...
Felix Fietkau [Tue, 3 Dec 2013 14:17:44 +0000 (14:17 +0000)]
netifd: update to the latest version, improves wireless status output and fixes some bridge handling issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38992

10 years agohostapd: fix maclist processing with netifd
Felix Fietkau [Tue, 3 Dec 2013 09:02:58 +0000 (09:02 +0000)]
hostapd: fix maclist processing with netifd

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38991

10 years agowifi: restart netifd wifi interfaces on the "up" command like the old variant
Felix Fietkau [Mon, 2 Dec 2013 16:53:27 +0000 (16:53 +0000)]
wifi: restart netifd wifi interfaces on the "up" command like the old variant

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38990

10 years agowifi: rename the "reload" (restarting non-netifd wifi) command to "reload_legacy"
Felix Fietkau [Mon, 2 Dec 2013 16:53:24 +0000 (16:53 +0000)]
wifi: rename the "reload" (restarting non-netifd wifi) command to "reload_legacy"

Add a new "reload" command that reloads the netifd config as well

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38989

10 years agonetifd: add wireless configuration support and port mac80211 to the new framework
Felix Fietkau [Mon, 2 Dec 2013 16:41:03 +0000 (16:41 +0000)]
netifd: add wireless configuration support and port mac80211 to the new framework

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38988

10 years agouci: update to the latest version, adds a small uci_to_blob fix
Felix Fietkau [Mon, 2 Dec 2013 13:08:17 +0000 (13:08 +0000)]
uci: update to the latest version, adds a small uci_to_blob fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38987

10 years agohostapd: change the wildcard for the hostapd control socket directory
Felix Fietkau [Mon, 2 Dec 2013 13:08:14 +0000 (13:08 +0000)]
hostapd: change the wildcard for the hostapd control socket directory

prepare for using /var/run/hostapd instead of /var/run/hostapd-phy*

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38986

10 years agowpa_supplicant: clean up hostapd control socket on exit to fix socket leak in ap...
Felix Fietkau [Mon, 2 Dec 2013 13:08:11 +0000 (13:08 +0000)]
wpa_supplicant: clean up hostapd control socket on exit to fix socket leak in ap+sta mode on wifi restarts

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38985

10 years agohostapd: fix os_daemonize vs starting process race by creating the pid file in the...
Felix Fietkau [Mon, 2 Dec 2013 13:08:08 +0000 (13:08 +0000)]
hostapd: fix os_daemonize vs starting process race by creating the pid file in the parent

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38984

10 years agolibubox: update to latest version, adds some more jshn performance improvements and...
Felix Fietkau [Mon, 2 Dec 2013 13:08:03 +0000 (13:08 +0000)]
libubox: update to latest version, adds some more jshn performance improvements and fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38983

10 years agonetifd: remove redundant calls to /sbin/wifi down
Felix Fietkau [Mon, 2 Dec 2013 13:08:00 +0000 (13:08 +0000)]
netifd: remove redundant calls to /sbin/wifi down

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38982

10 years agohostapd: always include p2p options in wpa_cli
Felix Fietkau [Mon, 2 Dec 2013 13:07:46 +0000 (13:07 +0000)]
hostapd: always include p2p options in wpa_cli

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38981

10 years agobrcm47xx: misc cleanups
Hauke Mehrtens [Sun, 1 Dec 2013 18:12:57 +0000 (18:12 +0000)]
brcm47xx: misc cleanups

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38980

10 years agobrcm47xx: deactivate mips wait instruction only for BCM4706
Hauke Mehrtens [Sun, 1 Dec 2013 18:05:08 +0000 (18:05 +0000)]
brcm47xx: deactivate mips wait instruction only for BCM4706

The wait instruction is only broken on the BCM4706 and not on the other
similar SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38979

10 years agobrcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSE
Hauke Mehrtens [Sun, 1 Dec 2013 17:34:27 +0000 (17:34 +0000)]
brcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSE

This sets both values to the OpenWrt default values. There is no reason
to use some brcm47xx specific values here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38978

10 years agomac80211: b43: improve PCIe host controller workaround
Hauke Mehrtens [Sun, 1 Dec 2013 17:23:19 +0000 (17:23 +0000)]
mac80211: b43: improve PCIe host controller workaround

This is only needed by BCM4716 and not by BCM4706, I haven't seen any
problems there. Adds the write flush for some more parts where the phy
control regs are written.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38977

10 years agomac80211: remove DMI_EXACT_MATCH
Hauke Mehrtens [Sun, 1 Dec 2013 17:20:32 +0000 (17:20 +0000)]
mac80211: remove DMI_EXACT_MATCH

DMI_EXACT_MATCH was added to the kernel in version 3.10.21 and collides
with backports version. DMI_EXACT_MATCH is only used by the intel GPU
driver which is not build by OpenWrt, so remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38976

10 years agobrcm47xx: add vectored interrupts
Hauke Mehrtens [Sun, 1 Dec 2013 16:37:58 +0000 (16:37 +0000)]
brcm47xx: add vectored interrupts

This adds support for vectored interrupts in this SoC.
This is supported by the 74K cpus.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38975