Steven Barth [Fri, 19 Jun 2015 13:30:18 +0000 (13:30 +0000)]
iproute2: honor LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46064
Jonas Gorski [Fri, 19 Jun 2015 11:12:43 +0000 (11:12 +0000)]
kernel: update 4.0 to 4.0.5
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46063
Imre Kaloz [Fri, 19 Jun 2015 08:35:11 +0000 (08:35 +0000)]
mwlwifi: upgrade to 10.3.0.3
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46061
John Crispin [Thu, 18 Jun 2015 18:21:52 +0000 (18:21 +0000)]
ralink: add support for mt7621 switch counters
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>
SVN-Revision: 46050
John Crispin [Thu, 18 Jun 2015 18:21:46 +0000 (18:21 +0000)]
ar71xx: add profile and build image for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46049
John Crispin [Thu, 18 Jun 2015 18:21:41 +0000 (18:21 +0000)]
ar71xx: add user-space support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46048
John Crispin [Thu, 18 Jun 2015 18:21:33 +0000 (18:21 +0000)]
ar71xx: add kernel support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46047
John Crispin [Thu, 18 Jun 2015 18:21:23 +0000 (18:21 +0000)]
ar71xx: add support for TL-WR720N-v4.
The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks
were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch
were tested by "Wong min <alpha080@gmail.com>".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46046
John Crispin [Thu, 18 Jun 2015 18:21:15 +0000 (18:21 +0000)]
ar71xx: add support for compex wpj531
tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46045
John Crispin [Thu, 18 Jun 2015 18:21:05 +0000 (18:21 +0000)]
ar71xx: Add Support for the Bitmain Antminer S1
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s1
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>
SVN-Revision: 46044
John Crispin [Thu, 18 Jun 2015 18:20:56 +0000 (18:20 +0000)]
ramips: Add Support for the Linksys RE6500
This patch adds support for the Linksys RE6500 Range Extender
http://wiki.openwrt.org/toh/linksys/re6500
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46043
John Crispin [Thu, 18 Jun 2015 18:20:46 +0000 (18:20 +0000)]
ramips: Add support for the D-Link DCS-930 B1
http://wiki.openwrt.org/toh/d-link/dcs-930l
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46042
John Crispin [Thu, 18 Jun 2015 18:20:40 +0000 (18:20 +0000)]
ramips: add support for PandoraBox PBR-M1
This patch is for PandoraBox PBR-M1 which is based on mt7621,
all the features work fine, including rtc, leds, button, usb3.0, etc.
Signed-off-by: tymon <banglang.huang@foxmail.com>
SVN-Revision: 46041
John Crispin [Thu, 18 Jun 2015 17:04:14 +0000 (17:04 +0000)]
ubus: update to latest git HEAD
this adds ACL support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46040
John Crispin [Thu, 18 Jun 2015 11:57:07 +0000 (11:57 +0000)]
ramips: fix a bug in the cevt code on mt7620
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46038
Steven Barth [Thu, 18 Jun 2015 11:10:46 +0000 (11:10 +0000)]
linux-atm: add PKG_FIXUP
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46037
Steven Barth [Thu, 18 Jun 2015 10:55:57 +0000 (10:55 +0000)]
lua: honor LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46036
Steven Barth [Thu, 18 Jun 2015 10:48:28 +0000 (10:48 +0000)]
package.mk: replicate SSP and relro in both CFLAGS and LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46035
Steven Barth [Thu, 18 Jun 2015 09:49:45 +0000 (09:49 +0000)]
uclibc: unbreak after enabling SSP
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46034
Felix Fietkau [Thu, 18 Jun 2015 09:41:23 +0000 (09:41 +0000)]
ar71xx: fix hw id of tl-wr710n image (#19902)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46032
Felix Fietkau [Thu, 18 Jun 2015 09:41:12 +0000 (09:41 +0000)]
kernel: add Realtek USB to Ethernet modules
https://forum.openwrt.org/viewtopic.php?pid=279394
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46031
Steven Barth [Thu, 18 Jun 2015 08:52:33 +0000 (08:52 +0000)]
libtool: passthrough -fstack-protector* to linker
on some platforms this is needed for gcc to link libssp
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46030
Steven Barth [Thu, 18 Jun 2015 08:13:04 +0000 (08:13 +0000)]
libnl-tiny: honor CFLAGS when linking
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46029
Felix Fietkau [Thu, 18 Jun 2015 06:41:49 +0000 (06:41 +0000)]
openvpn: bump to 2.3.7.
Two patches are dropped as they were already applied upstream.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46027
Felix Fietkau [Thu, 18 Jun 2015 06:41:45 +0000 (06:41 +0000)]
ipkg-build: suppress timestamps in gzip headers
When creating control.tar.gz, data.tar.gz and $package.ipk
tar compresses them with default gzip options.
This includes build timestamps in their gzip headers.
By setting the GZIP env variable to -n, gzip no longer embeds
them, which is a step towards reproducibility.
See also [1] for more detailed motivations.
[1]: https://wiki.debian.org/ReproducibleBuilds/About
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 46026
Felix Fietkau [Thu, 18 Jun 2015 06:39:09 +0000 (06:39 +0000)]
libusb-compat: fix musl compatibility issues
Use stdint types instead of non-standard ones
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46025
Felix Fietkau [Thu, 18 Jun 2015 06:39:00 +0000 (06:39 +0000)]
kernel: mitigate cgroups config dependency changes
Memory Resource Controller no longer depends on Resource counters since
Kernel version 4.0.
3.18 is the only still supported version needing Resource counters for
MEMCG, thus declare the dependency only for that version.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 46024
Felix Fietkau [Thu, 18 Jun 2015 06:37:08 +0000 (06:37 +0000)]
procd: update to the latest version, fixes umask handling for creating /dev/shm
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46023
Felix Fietkau [Thu, 18 Jun 2015 06:37:01 +0000 (06:37 +0000)]
ar71xx: ar934x-nfc: allow ECC to be configured in software BCH mode
Some devices ship with NAND images that use BCH ECC. Let the driver know
about that ECC mode so that it can be selected by machine files.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
SVN-Revision: 46022
Hauke Mehrtens [Wed, 17 Jun 2015 22:37:49 +0000 (22:37 +0000)]
broadcom-wl: fix build with musl
This fixes some build problems with musl. The binary only program
nas.exe wants to link against __assert, which is copied from uClibc.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46021
Steven Barth [Wed, 17 Jun 2015 13:13:48 +0000 (13:13 +0000)]
hardening: enable regular SSP support by default
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46020
Felix Fietkau [Wed, 17 Jun 2015 12:55:20 +0000 (12:55 +0000)]
kernel: add linux 4.0 overlayfs locking fix by Miklos Szeredi
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46019
Jo-Philipp Wich [Wed, 17 Jun 2015 11:31:45 +0000 (11:31 +0000)]
x86/64: enable VirtIO block and console support
This is required to use x86/64 in KVM containers with VirtIO disks
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46017
Felix Fietkau [Wed, 17 Jun 2015 10:13:24 +0000 (10:13 +0000)]
procd: update to the latest version, fixes /dev/shm permissions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46013
Jonas Gorski [Wed, 17 Jun 2015 09:55:13 +0000 (09:55 +0000)]
ar71xx: rb493g: fix gpio-mdio accesses under load
It seems that there are maximum timings for mdio accesses that can be
hit when the system is under load and the thread is scheduled during
a read or write access. Since there is no way of knowing if this
happens as there is not even a parity bit, try to work around it
by disabling interrupts during any gpio-mdio accesses.
Performance impact seems to be neglectable, as mdio accesses are not
that often.
Hopefully fixes #19500.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46012
Jonas Gorski [Wed, 17 Jun 2015 09:54:55 +0000 (09:54 +0000)]
kernel: update 3.18 to 3.18.16
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46011
Felix Fietkau [Wed, 17 Jun 2015 09:09:03 +0000 (09:09 +0000)]
ath9k: add another fix for some rx/tx dma stop issues, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46008
Felix Fietkau [Wed, 17 Jun 2015 09:08:20 +0000 (09:08 +0000)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46007
Matteo Croce [Tue, 16 Jun 2015 21:43:26 +0000 (21:43 +0000)]
ltq-vdsl-app: build fix for MUSL
SVN-Revision: 46006
Steven Barth [Tue, 16 Jun 2015 17:28:11 +0000 (17:28 +0000)]
openssl: disable parallel builds (spurious linking break)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46005
Steven Barth [Tue, 16 Jun 2015 17:28:05 +0000 (17:28 +0000)]
hardening: enable RELRO by default
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46004
Steven Barth [Tue, 16 Jun 2015 17:27:59 +0000 (17:27 +0000)]
hardening: enable format security checking by default
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46003
Felix Fietkau [Tue, 16 Jun 2015 11:55:23 +0000 (11:55 +0000)]
musl: update to version 1.1.10+git
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46001
Felix Fietkau [Tue, 16 Jun 2015 10:51:16 +0000 (10:51 +0000)]
opkg: fix duplicate check_signature line for smime variant (#19863)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45999
Rafał Miłecki [Tue, 16 Jun 2015 08:28:46 +0000 (08:28 +0000)]
bcm53xx: use USB patches sent upstream by Hauke
This stabilizes USB support. The old patch was handling initialization
in a different order that was causing some problems with few USB 3.0
devices. Some weren't detected, some were working unstable, sometimes
USB 3.0 could hang the whole controller.
A still known issue (but not a regression) is controller hang triggered
by connecting USB 1.1 device when not having OHCI controller enabled
(kmod-usb-ohci).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45997
Felix Fietkau [Mon, 15 Jun 2015 23:05:08 +0000 (23:05 +0000)]
toolchain: switch to musl by default, except for mips64
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45995
Rafał Miłecki [Mon, 15 Jun 2015 22:11:50 +0000 (22:11 +0000)]
kernel: use bcma-hcd.ko on bcm53xx for ohci
On bcm53xx we still need usb-ohci to support USB 1.1 devices and it
obviously needs bcma-hcd.ko that will init controller and register
platform device.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45994
Felix Fietkau [Mon, 15 Jun 2015 21:16:15 +0000 (21:16 +0000)]
kernel: add missing config symbol (#19870)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45992
Felix Fietkau [Mon, 15 Jun 2015 21:14:01 +0000 (21:14 +0000)]
mt76: update to the latest version to fix a build error (#19871)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45990
Steven Barth [Mon, 15 Jun 2015 08:10:59 +0000 (08:10 +0000)]
Update dnsmasq to v2.73.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
SVN-Revision: 45988
Felix Fietkau [Mon, 15 Jun 2015 07:46:33 +0000 (07:46 +0000)]
Revert "kernel: add rtl8723au driver (staging)"
This one cannot possibly work, as it depends on cfg80211, which is built
out of tree.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45985
Felix Fietkau [Mon, 15 Jun 2015 07:46:21 +0000 (07:46 +0000)]
elfutils: bump to 0.162
Besides source.tgz, 001-elfutils-portability.patch (provided by upstream
project) where updated.
Other patches where updated to fix hulk warnings and minor conflicts.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
SVN-Revision: 45984
Felix Fietkau [Mon, 15 Jun 2015 07:46:05 +0000 (07:46 +0000)]
ar71xx/image: move ubnt images to new BuildCode
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45983
Felix Fietkau [Mon, 15 Jun 2015 07:45:54 +0000 (07:45 +0000)]
ar71xx/image: add build step mkubntimage2 mkubntkernelimage for unifi boards
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45982
Felix Fietkau [Mon, 15 Jun 2015 07:45:46 +0000 (07:45 +0000)]
ar71xx/image: new build step Build/mkubntimage for ubnt factory images
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45981
Felix Fietkau [Mon, 15 Jun 2015 07:45:36 +0000 (07:45 +0000)]
image.mk: add Build step pad-to
pad-to can be used in a pipe to pad the image to a specific chunk-size.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45980
Felix Fietkau [Mon, 15 Jun 2015 07:45:27 +0000 (07:45 +0000)]
image.mk: add Build step combined-image
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45979
Felix Fietkau [Sun, 14 Jun 2015 17:47:16 +0000 (17:47 +0000)]
Makefile: move the cleaning of staging_dir/target* from dirclean to clean
Currently "make clean" only clears the build_dir/target*, but leaves
staging_dir/target* intact. "make clean" should also clean the
staging_dir/target* directories, as in the current situation some old
packages or libraries may be linked into the firmware from staging_dir
despite a "make clean".
The patch reorganises clean / dirclean functionality so that
* "make clean" also clears the staging_dir/target* in addition to
build_dir/target*.
* "make dirclean" clears toolchain and host(=tools) directories from both
build_dir and staging_dir
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45973
Felix Fietkau [Sun, 14 Jun 2015 17:44:04 +0000 (17:44 +0000)]
procd: update to the latest version, adds a few fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45972
Felix Fietkau [Sun, 14 Jun 2015 17:43:59 +0000 (17:43 +0000)]
ar71xx: return limit as number of processed frames when re-scheduling NAPI poll
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45971
Felix Fietkau [Sun, 14 Jun 2015 17:43:50 +0000 (17:43 +0000)]
ar8216: Fix problem with AR8337 MAC swap handling
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.
Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.
The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 45970
Felix Fietkau [Sun, 14 Jun 2015 17:43:40 +0000 (17:43 +0000)]
elfutils: import package from packages.git
elfutils is required by perf. So we'll move this package from
packages.git and make it part of the core distribution.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45969
Felix Fietkau [Sun, 14 Jun 2015 17:43:34 +0000 (17:43 +0000)]
bzip2: import package from packages.git
bzip2 is required by elfutils, itself required by perf. So we'll move
this package from packages.git and make it part of the core
distribution.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45968
Felix Fietkau [Sun, 14 Jun 2015 17:43:28 +0000 (17:43 +0000)]
argp-standalone: import package from packages.git
argp-standalone is required by elfutils, itself required by perf. So
we'll move this package from packages.git and make it part of the core
distribution.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45967
Felix Fietkau [Sun, 14 Jun 2015 17:43:22 +0000 (17:43 +0000)]
include/scan.mk: Add -a argument to the grep to treat all Makefiles as a text file.
Hello,
I found out that in some rare cases grep can treat Makefile as a binary file. That happened to me on UTF-8 Gentoo if Makefile contained a character which was from extended ASCII table.
Without this patch the output of the grep command in the $(FILELIST) target is not valid (contains line "Binary file matches") and following commands fail to create feed index file.
Best Regards,
Martin Strbacka
Signed-off-by: Martin Strbacka <martin.strbacka@nic.cz>
SVN-Revision: 45966
Felix Fietkau [Sun, 14 Jun 2015 17:43:18 +0000 (17:43 +0000)]
ar71xx: Add pll_1000 value for eth0 to Ubiquiti Rocket M XW
This patch adds the pll_1000 value for eth0 interface. This makes the Rocket M
XW image compatible with other Ubiquiti devices with similar hardware with a
Gigabit Ethernet port.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 45965
Felix Fietkau [Sun, 14 Jun 2015 17:42:05 +0000 (17:42 +0000)]
build: do another init script enabling run, fixes init scripts added via files/ (#19857)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45964
Felix Fietkau [Sun, 14 Jun 2015 17:42:00 +0000 (17:42 +0000)]
oxnas: change file extension of u-boot+initramfs image
The *u-boot-initramfs* images are not ITB/FIT images but are rather
supposed to be loaded to RAM and jumped-into.
To avoid confusion, change the file extension from itb to bin.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45963
Felix Fietkau [Sun, 14 Jun 2015 17:41:54 +0000 (17:41 +0000)]
openvpn: bump PKG_RELEASE.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45962
Felix Fietkau [Sun, 14 Jun 2015 17:41:43 +0000 (17:41 +0000)]
openvpn: let instances drop to nobody in default config.
This is for security precautions. As persist_tun and persist_key are
already there, this should not cause compatibility issue.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45961
Felix Fietkau [Sun, 14 Jun 2015 17:41:38 +0000 (17:41 +0000)]
openvpn: fix handling option auth_retry.
As reported in ticket #19104, auth_retry takes a <type> argument with 3
choices: none, nointeract, interact.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45960
Felix Fietkau [Sun, 14 Jun 2015 17:41:33 +0000 (17:41 +0000)]
libubox: update to the latest version, adds a few fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45959
Felix Fietkau [Sun, 14 Jun 2015 17:41:27 +0000 (17:41 +0000)]
ar71xx: fix mac offset in firmware file
In new firmware-4.bin (for ath10k) mac offset is 0x114 (276), not 0x118 (280).
This also closes #19751, bug introduced in #45624
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 45958
Felix Fietkau [Sun, 14 Jun 2015 17:41:21 +0000 (17:41 +0000)]
firmware-tools/ptgen: use stdint types for struct pte
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45957
Felix Fietkau [Sun, 14 Jun 2015 17:41:16 +0000 (17:41 +0000)]
firmware-tools/ptgen: fix endianness conversion for PTE .start, .length field.
They are of 32-bit little endian integers.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45956
Felix Fietkau [Sun, 14 Jun 2015 17:41:07 +0000 (17:41 +0000)]
procd: correct the order of respawn params in the comments.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45955
Felix Fietkau [Sun, 14 Jun 2015 17:41:01 +0000 (17:41 +0000)]
ar71xx: fix 100/10mbps ethernet link issues on mynet range extender
The mynet range extender hardware is suffering from ethernet
link loss when booting with a recent openwrt image. This only
happens on 100mbps links, with 1Gbps speed the link was fine.
The cause of the problem is that the AR8035 PHY (aka F1E)
requires turning on and off the special TX delay setting
depending on the speed of the link.
The 10mbps mode only needed the proper pll value, which was
extracted from the vendor code.
Reported-by: Pascal Paradis
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 45954
Felix Fietkau [Sun, 14 Jun 2015 17:40:52 +0000 (17:40 +0000)]
samba36: remove host build paths
- fix iconv detection because it adds host paths
- disable python detection (host python-config is found)
iconv issue is reported by buildbot config.log + replicated locally
see config.log in logs.tar.gz
python issue observed locally on Arch Linux
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45953
Felix Fietkau [Sat, 13 Jun 2015 08:47:28 +0000 (08:47 +0000)]
mt76: update to the latest version, adds many fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45952
Steven Barth [Fri, 12 Jun 2015 20:49:20 +0000 (20:49 +0000)]
openssl: 1.0.2c (srsly, you guys, srsly)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45950
Steven Barth [Fri, 12 Jun 2015 07:38:00 +0000 (07:38 +0000)]
ppp: bump PKG_RELEASE
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45949
Steven Barth [Fri, 12 Jun 2015 07:37:53 +0000 (07:37 +0000)]
ppp : Unnumbered support
Adds PPP unnumbered support via the parameter unnumbered which points to a logical OpenWRT interface.
The PPP proto shell handler will "borrow" an IP address from the unnumbered interface (if multiple
IP addresses are present the longest prefix different from 32 will be "borrowed") for which a host
interface dependency will be created. Due to the host interface dependency the PPP unnumbered interface
will only "borrow" an IP address from an interface which is up.
The borrowed IP address will be shared as local IP address by the PPP daemon and no other local IP
will be accepted from the peer in the IPCP negotiation.
A typical use case is the usage of a public IP subnet on the Lan interface which will be shared
by the PPP interface as local IP address.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45948
Steven Barth [Thu, 11 Jun 2015 20:36:46 +0000 (20:36 +0000)]
openssl: fixes CVE-2015-4000 CVE-2015-1788 CVE-2015-1789 CVE-2015-1790 CVE-2015-1792 CVE-2015-1791
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45947
Steven Barth [Thu, 11 Jun 2015 20:28:44 +0000 (20:28 +0000)]
openssl: 1.0.2b (hey, we made it nearly 3 months this time!)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45946
Jonas Gorski [Thu, 11 Jun 2015 12:10:43 +0000 (12:10 +0000)]
brcm63xx: fix A4001N image padding size
When r42245 moved A4001N to DT based detection the image padding size
was accidentally increased from 4 to 8 MiB. This made images unflashable
on these devices.
Fixes #19836.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45945
Imre Kaloz [Thu, 11 Jun 2015 11:57:11 +0000 (11:57 +0000)]
toolchain/gcc: upgrade Linaro GCC 4.9 to 4.9-2015.03
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45944
Rafał Miłecki [Wed, 10 Jun 2015 20:34:32 +0000 (20:34 +0000)]
bcm53xx: update NVRAM driver to MIPS version from upstream-sfr
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45943
Rafał Miłecki [Wed, 10 Jun 2015 19:52:07 +0000 (19:52 +0000)]
brcm47xx: backport BCM47XX patches (NVRAM & BCMA_HOST_PCI)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45942
Steven Barth [Wed, 10 Jun 2015 15:54:24 +0000 (15:54 +0000)]
odhcp6c: work around RIOs matching PIOs as sent by some apple routers
Thanks to Mikael Abrahamsson for reporting.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45941
Steven Barth [Wed, 10 Jun 2015 11:50:13 +0000 (11:50 +0000)]
6to4: Remove sourcerouting parameter registration
Commit
31214c38c8dd0f70366b523f9b0335145b9386bd removes IPv6 unneeded source-dest-routing workarounds;
as a result sourcerouting parameter is unused and can be removed.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45940
Steven Barth [Wed, 10 Jun 2015 11:50:09 +0000 (11:50 +0000)]
6rd: Remove sourcerouting parameter registration
Commit
31214c38c8dd0f70366b523f9b0335145b9386bd removes IPv6 unneeded source-dest-routing workarounds;
as a result sourcerouting parameter is unused and can be removed.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45939
Jonas Gorski [Wed, 10 Jun 2015 09:21:36 +0000 (09:21 +0000)]
b53: fix memory out of bounds access on 64 bit targets
On device reset the sizes for the vlan and port tables were wrongly
calculated based on the pointer size instead of the struct size. This
causes buffer overruns on 64 bit targets, resulting in panics.
Fix this by dereferencing the pointers.
Reported-by: Fedor Konstantinov <blmink@mink.su>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45938
Jonas Gorski [Wed, 10 Jun 2015 09:21:31 +0000 (09:21 +0000)]
b53: widen stp state mask to 3 bits (instead of 2)
At least on my b53 chip, the mask is 3 bits wide, and because
of this some STP states are not set properly and discarded when read.
Maybe for some other chips it makes sense to have just 2 bits width,
but I don't have other versions around to test/validate.
If that's the case then maybe we could add another STP state mask.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45937
Steven Barth [Tue, 9 Jun 2015 21:18:55 +0000 (21:18 +0000)]
map: add sleep work-around for lw4o6 race-condition
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45936
Steven Barth [Tue, 9 Jun 2015 20:28:35 +0000 (20:28 +0000)]
odhcp6c: fix handling of custom DHCPv6 options
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45935
Jo-Philipp Wich [Tue, 9 Jun 2015 16:52:12 +0000 (16:52 +0000)]
ustream-ssl: fix compilation against current PolarSSL/mbedTLS version
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45934
Rafał Miłecki [Tue, 9 Jun 2015 15:13:18 +0000 (15:13 +0000)]
kernel: mac80211: bcm53xx has bcma built-in
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45933
Rafał Miłecki [Mon, 8 Jun 2015 15:17:52 +0000 (15:17 +0000)]
mac80211: add brcmfmac patch for synchronous init
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45932
Rafał Miłecki [Mon, 8 Jun 2015 15:17:35 +0000 (15:17 +0000)]
mac80211: add brcmfmac patch reading NVRAM from platform
This allows e.g. BCM43602 to work out of box, without dumping a proper
MTD partition to /lib/firmware/ NVRAM file.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45931
Felix Fietkau [Mon, 8 Jun 2015 12:51:13 +0000 (12:51 +0000)]
ramips: fix Power LED handling for WHR-300HP2, WHR-600D, WHR-1166D
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45930
projects / openwrt / staging / florian.git / log