git.openwrt.org Git - openwrt/staging/blogic.git/log

staging: rtl8192e: Fix SPACING error

Fix SPACING error in rtl8192_hw_to_sleep().

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl8192E_suspend(): Fix WOL reporting

WOL capability was reported in an awkward way - print it nicely.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix trivial LONG_LINE errors

Reindent lines to make checkpatch happy.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Replace RT_TRACE(COMP_ERR, ...) with netdev_*

- Use netdev_* with log level depending on how serious error is
- Rework some messages to be more readable
- Pass net_device where needed for pretty prints

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl8192_phy_checkBBAndRF(): Don't check MAC

This function never supported checking of MAC block.
Instead of printing several warnings - print it once and exit.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove unneeded RT_TRACE(COMP_ERR,...)

This messages are not needed, as failure is reported earlier in code.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Replace ?: with max

All get_key implementations return either -1 or small buffers, so
cast int->u16 is not a problem.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Replace ?: with min_t

Replace :? with min_t for readability. Remove check that is always false.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Replace ?: with max_t

Improve readability and make checkpatch happy.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove unused rtl_crypto.h

This header is not used - remove it to make driver code smaller.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix OOM_MESSAGE warnings

Remove alloc failed messages where not needed to make checkpatch.pl happy.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove unimplemented iwpriv handlers

Remove the following private variables:
- force_mic_error - changes force_mic_error that is not used
- radio - changes sw_radio_on that is not used
- adhoc_peer_list - unimplemented
- firm_ver - unimplemented

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix LONG_LING in rtllib_parse_info_param()

Take out MIFE_TYPE_HT_CAP processing into separate function -
rtllib_parse_mfie_ht_cap()

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix LONG_LINE warnings

Fix most of simple LONG_LINE warnings. None of the changes should affect
behaviour of code, so several modifications are included in this patch:
- Code is reindented where needed
- Local variable names are compacted (priv -> p)
- Unnecessary casts are removed
- Nested ifs are replaced with logical and
- a = b = c = d expressions are split
- Replace if/then series with clamp_t()
- Removed unneeded scopes

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix PREFER_PR_LEVEL warnings

Fix most of remaining PREFER_PR_LEVEL warnings in rtllib.
Replace printk() with netdev_* if possible, pr_* in other cases.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove assert() macro

Assert macro printed warning message (and was used once).
Remove it, and add netdev_warn() in place where it was called.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove remains of RTLLIB_*_DEBUG() (including proc entry)

Remove rest of rtllib "debug" system - it is no longer used -
proper netdev_* functions are used in most cases.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove RTLLIB_DEBUG_DATA()

Use print_hex_dump_bytes() if VERBOSE_DEBUG is enabled.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove RTLLIB_DEBUG()

- Use netdev_dbg or netdev_vdbg instead of RTLLIB_DEBUG()
- Reformat some messages for better readability
- Remove RTLLIB_DEBUG messages that make no sense

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove RTLLIB_DEBUG_INFO()

Use pr_debug() instead.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove RTLLIB_DEBUG_MGMT()

- Use netdev_dbg() instead of RTLLIB_DEBUG_MGMT()
- Remove RTLLIB_DEBUG_MGMT()
- Pass net_device to auth_parse(), auth_rq_parse() and assoc_rq_parse()
- Remove duplicated messages

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove RTLLIB_DEBUG_QOS()

- Pass extra argument (rtllib_device) to rtllib_parse_qos_info_param_IE()
and update_network()
- Replace RTLLIB_DEBUG_QOS() with netdev_dbg()
- Remove RTLLIB_DEBUG_QOS()

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove RTLLIB_DEBUG_SCAN()

Use netdev_dbg() instead, remove duplicated logs.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Simplify rtllib_process_probe_response()

- Extract frame_ctl once and use it as variable.
- Drop endian conversion in is_beacon() function
(used in simplified function only)
- Simplify debug messages
- Invert STYPE checks in debug messages - it is valid
as only BEACON and PROBE_RESP are allowed

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove RTLLIB_DEBUG_WX()

Use netdev_dbg() instead of RTLLIB_DEBUG_WX().
Rewrite some messages to be more readable.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove RTLLIB_ERROR() and RTLLIB_WARNING()

Use pr_* where needed (rtllib init code).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Replace RTLLIB_DEBUG(DL_ERR) with netdev_*()

Replace all RTLLIB_DEBUG(RTLLIB_DL_ERR, *) calls with netdev_err()
for errors that really should be reported to user.
Use netdev_warn() for the rest.
Rephrase some of the messages to make them more readable/compact.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove rtllib_crypt.[ch]

It is neither compiled nor used in rtl8192e.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Replace memcmp() with ether_addr_equal()

Use dedicated macro to compare ethernet addresses in probe_rq_parse().

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix DEEP_INDENTATION warning in rtllib_parse_info_param()

Move MFIE_TYPE_GENERIC handler to rtllib_parse_mife_generic() function.
Code was not altered significantly, therefore in some places it generates
LONG_LINE checkpatch.pl warnings.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix PREFER_ETHER_ADDR_COPY warnings

Replace memcpy() with ether_addr_copy() where possible to make
checkpatch.pl happy.
Change was target tested (download 1Mb file over WPA2 network)
with BUG trap for unaligned addresses in ether_addr_copy()

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Make ethernet addresses properly aligned

Reorder ethernet addresses allocated on stack or in non-packed
structures to keep them aligned(2).
Use ETH_ALEN as array length in places where it was hardcoded to 6.

Alignment verified using pahole where possible and target-tested
with BUG_ON() trap in ether_addr_copy.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: accept const MAC address

Make set_swcam, setKey and rtllib_probe_resp parameter (MAC address)
const.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Add support for Himax HX8357D controller

The Himax HX8357D is used e.g. by the Adafruit PITFT Plus 3.5".
Adafruit added HX8357D support to an own fork of fbtft and support
Raspbian only (https://github.com/adafruit/adafruit-rpi-fbtft/).
They don't intend to push it upstream but gave me the ok to do so.
Original author: Sean Cross <xobs@kosagi.com>

I just applied small changes to the driver to align it with the other
fbtft drivers.
- add "compatible" argument to FBTFT_REGISTER_DRIVER call
- add missing MODULE_ALIAS declarations

Tested successfully with this display on an RPI2 under Arch Linux ARM
(kernel 3.18.13).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Kill dead calls to kill_pid()

There is no interface to register PIDs of processes the driver should
send a signal to. Remove it.

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device_rx_srv check sk_buff is NULL

There is a small chance that pRD->pRDInfo->skb could go NULL
while the interrupt is processing.

Put NULL check on loop to break out.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace and resize dwIsr

dwIsr is not used outside vnt_interrupt_process and should
be u32.

Move to function and resize to u32.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: vnt_interrupt_process remove camel case.

pDevice -> priv

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: vnt_interrupt_process remove page 0 select

Page 1 is fully proctected by lock there is no need
to check for it. Page 0 is selected at other times.

Remove byOrgPageSel and its calls from function.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: use workqueue for interrupt handling

Introduce vnt_interrupt to handle interrupt and use workqueue
to queue and queue on vif.

Convert device_intr to void call vnt_interrupt_process
from vnt_interrupt_work providing vif is valid.

This removes troublesome heavy code from the interupt handler and
allows to remove atomic from other areas of driver.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove mib.c/h dead code.

Remove from makefile and dead variables

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Remove call to STAvUpdateIsrStatCounter.

This function does not provide any data to users.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: dead code remove STAvUpdate802_11Counter

This function is nolonger of any future use.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: implement ieee80211_low_level_stats

Collect low level stats from mib counter for mac80211 call.

Replacing the unused function STAvUpdate802_11Counter.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Replace kzalloc followed by memcpy with kmemdup

Replace kzalloc followed by memcpy by kmemdup. This patch was generated
by 'make coccicheck'

Signed-off-by: Niranjan Dighe <ndighe@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre/obdclass/acl: remove unused variable

lustre_ext_acl_xattr_reduce_space() declares old_size, but never uses it
and gcc 5.x likes to complain about this, so remove it as it's not used
at all.

Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obd: final removal of procfs stuff

Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obd: Remove nid_stats tracking

This nid_stats tracking only makes sense on the server side,
on the client there are no other clients to keep track of anyway.

Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obd: remove unused lprocfs_exp_setup() and related functions

This code only made sense on servers.

Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obd: Rename lprocfs_add_symlink to ldebugfs_add_symlink

Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obd: remove unused proc_lustre_root

Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Move all remaining procfs entries to debugfs

This moves all remaining procfs handling in llite layer to debugfs.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: use schedule_timeout_interruptible()

API consolidation with coccinelle found:
./drivers/staging/panel/panel.c:782:2-18:
consolidation with schedule_timeout_*() recommended

This is a 1:1 conversion with respect to schedule_timeout() to the
schedule_timeout_interruptible() helper only - so only an API
consolidation to improve readability. The timeout was being passed
as (ms * HZ + 999) / 1000 but that simply looks wrong - rather than
"manual" converting to jiffies, msecs_to_jiffies which handles all
corner-cases correctly, was used.

Patch was compile tested with x86_64_defconfig + CONFIG_STAGING=y,
CONFIG_PARPORT=m, CONFIG_PANEL=m

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: me_daq: use schedule_timeout_interruptible()

API consolidation with coccinelle found:
./drivers/staging/comedi/drivers/me_daq.c:177:1-17:
consolidation with schedule_timeout_*() recommended

This is a 1:1 conversion of the current calls to an available helper
only - so only an API consolidation to improve readability.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Fix typo in sm750.c

This patch fix a spelling typo in printk within sm750.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove duplicate from fb_videomode

As suggested by Sudip this patch removes the redundant 1360x768@60
option from the fb_videomode struct array.
The removed option and the option one it differ in a typo and a flag.

Signed-off-by: Michel von Czettritz <michel.von.czettritz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: Replace spaces with tabs at the start of lines

Replace spaces at the start of lines with tabs to rectify
the following warning:
WARNING: please, no spaces at the start of a line

Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove redundant CONFIG_88EU_AP_MODE tests

Remove #ifdef's enclosed by an #ifdef test for the same macro to improve
readability.

No code changes:

  md5, CONFIG_88EU_AP_MODE=y:
    b819a33f65133607ebc33b8999ee3a79  r8188eu.o.before
    b819a33f65133607ebc33b8999ee3a79  r8188eu.o.after

  md5, CONFIG_88EU_AP_MODE=n:
    94c84035d59285408b866a57b442276d  r8188eu.o.before
    94c84035d59285408b866a57b442276d  r8188eu.o.after

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: return an error code, not a boolean

"If the name of a function is an action or an imperative command,
the function should return an error-code integer." (Documentation/CodingStyle)

Several action-like functions in this driver return a boolean: _SUCCESS = 1 on
success, _FAIL = 0 on error, defined in
drivers/staging/rtl8188eu/include/osdep_service.h.

Change rtw_start_drv_threads() to return a proper 0-or-error value.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: declare internal symbols as static

Also remove them from .h files.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove useless return value

The loadparam() function cannot fail, it's called only once and its return
value is ignored there.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add missing blank lines after declarations

Fixes checkpatch warnings:
WARNING: Missing a blank line after declarations

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: cosmetic: remove useless spaces

Even though these are not reported by checkpatch, they are coding style issues.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:nvec: fix typo in comment

Fix spelling error in comment in function tegra_nvec_remove.

Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove useless return value

The loadparam() function cannot fail, it's called only once and its return
value is ignored there.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove unneeded forward declaration

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove useless comment

"step 2" does mean much as there is no "step 1" stated anywhere...

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: prevent buffer overrun in recvbuf2recvframe

With an RTL8191SU USB adaptor, sometimes the hints for a fragmented
packet are set, but the packet length is too large. Allocate enough
space to prevent memory corruption and a resulting kernel panic [1].

[1] http://www.spinics.net/lists/linux-wireless/msg136546.html

Cc: <stable@vger.kernel.org>
Signed-off-by: Haggai Eran <haggai.eran@gmail.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: fix stack dump

del_timer_sync() is not to be called in the interrupt context unless
the timer is irqsafe. but most of the functions where commits
6501c8e7d86cca5f and 382d020f4459cd77 touched were called in interrupt
context. And as a result the WARN_ON was getting triggered. Changed
to del_timer() in places which were called from interrupt.

Fixes: 382d020f4459cd77 ("Staging: rtl8712: Eliminate use of _cancel_timer"
Fixes: 6501c8e7d86cca5f ("Staging: rtl8712: Eliminate use of _cancel_timer_ex")
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=97711
Reported-by: Arek Rusniak <arek.rusi@gmail.com>
Tested-by: Arek Rusniak <arek.rusi@gmail.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fwserial: fix resource leak

This patch fixes the leak, which was present in fwserial driver in the
init function. In case the tty driver allocation failed the function
returned error, leaving debugfs entry in the filesystem.

To fix the issue additional error label was added, so that the code will
jump to it in case of allocation failure, and free debugfs entries.

Signed-off-by: Vladimirs Ambrosovs <rodriguez.twister@gmail.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Use ether_addr_copy() instead of memcpy()

Fixes Warning encounter this by applying checkpatch.pl against this file:
Prefer ether_addr_copy() over memcpy() if the Ethernet addresses
are __aligned(2)

pahole output for respective structures:
- addr->sa_data
struct sockaddr {
sa_family_t sa_family; /* 0 2 */
char sa_data[14]; /* 2 14 */

/* size: 16, cachelines: 1, members: 2 */
/* last cacheline: 16 bytes */
};

- pnetdev->dev_addr
dev_addr is interface address infor from generic net_device structure
which is properly aligned and have some patches with this change as well.
"staging: rtl8712: fix Prefer ether_addr_copy() over memcpy()"
(sha1: 36e4d8826b317080e283e4edd08bf8d5ac706f38)

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Fix line over 80 characters

This patch fixes line over 80 characters warninings while
running checkpatch.pl - "WARNING: line over 80 characters"

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: fix coding style

Remove two warnings of missing-blank-line-after-declaration.

Signed-off-by: Sai.Jiang <sai.d.jiang@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: restore IRQs correctly after slic_cmdq_reset()

We can't save two different values in "flags" so it means that IRQs are
not enabled properly at the end of this function. This isn't a problem
in the current code because it's always called with IRQs disabled so we
don't want to enable them at the end.

This bug is old but it's thanks to David Matlack's recent cleanups that
Smatch can detect it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: Fix typos in printk

This patch fix 2 spelling typos in printk within gdm72xx.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove test for host endian

gdm_endian.c: small changes were done to remove testing for host
endianness and in-driver conversion for byte-ordering.
The linux/kernel.h functions are used now.

gdm_endian.h: removal of code no longer needed with changes
in gdm_endian.c.

Signed-off-by: Jaime Arrocha <jarr@kerneldev.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: pass timeout as HZ independent value

schedule_timeout takes a timeout in jiffies but the code currently is
passing in a constant POLLING_INTERVAL which makes this timeout HZ
dependent, so pass it through msecs_to_jiffies() to fix this up.

patch was compile tested for x86_64_defconfig + CONFIG_STAGING=y,
CONFIG_RTS5208=m

Patch is against 4.0-rc5 (localversion-next is -next-20150527)

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: fix transfer length 0 for 6-byte r/w commands

For 6-byte r/w commands, transfer length 0 means 256 blocks of data,
not 0 block.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Micky Ching <micky_ching@realsil.com.cn>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: Fix pointer cast for 32 bits

As the first argument of gf_write64() was of type unsigned long, and as
some calls to gf_write64() were casting the first argument from void *
to u64 the compiler and/or sparse were printing warnings for casts of
wrong sizes when compiling for i386.

This patch changes the type of the first argument of gf_write64() to
const void *, and update calls to the function. This change fixed the
warnings and allowed to remove casts from 3 calls to gf_write64().

In addition gf_write64() was renamed to gf_write_ptr() as the name was
misleading because it only writes 32 bits on 32 bit systems.

gf_write_dma_addr() was added to handle dma_addr_t values which is
used at drivers/staging/goldfish/goldfish_audio.c.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: Remove empty branch from conditional

This fixes a checkpatch style warning in ft1000_ioctl.

Signed-off-by: Alex Dowad <alexinbeijing@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dgap: dgap: Fixed spelling errors

Fixed comment spelling errors

Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

STAGING: Declare request_cache as static for drivers/staging/lustre/lustre/ptlrpc/client.c

Declare request_cache variable as static. It is only used by
drivers/staging/lustre/lustre/ptlrpc/client.c, and its naming is common
which will lead to namespace pollution.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Update header license for lustre_dlm_flags.h

lustre_dlm_flags.h was autogenerated with a wrong script that
mistakenly stated it is GPLv3 when in fact it should be GPLv2.

Also since we are no longer autogenerating this header, drop
all such mentionings.

Reported by: George G. Davis <ggdavisiv@gmail.com>

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6599
Reviewed-on: http://review.whamcloud.com/14797
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
CC: George G. Davis <ggdavisiv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: drop unneeded goto

Delete jump to a label on the next line, when that label is not
used elsewhere.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier l;
@@

-if (...) goto l;
-l:
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix non-static symbol warnings reported by sparse

Warnings reported by sparse:

drivers/staging/lustre/lustre/ptlrpc/pinger.c:94:5:
warning: symbol 'ptlrpc_ping' was not declared. Should it be static?

drivers/staging/lustre/lustre/ptlrpc/pinger.c:113:6:
warning: symbol 'ptlrpc_update_next_ping' was not declared. Should it be static

drivers/staging/lustre/lustre/ptlrpc/pinger.c:144:6:
warning: symbol 'pinger_check_timeout' was not declared. Should it be static?

drivers/staging/lustre/lustre/ptlrpc/pinger.c:425:21:
warning: symbol 'ptlrpc_new_timeout' was not declared. Should it be static?

drivers/staging/lustre/lustre/ptlrpc/pinger.c:551:1:
warning: symbol 'pet_list' was not declared. Should it be static?

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obd: move status files from procfs to debugfs

change type of
* obd->obd_proc_entry
* obd->obd_svc_procroot
* lov->lov_pool_proc_entry
* obd_type->typ_procroot
* pool_desc->pool_proc_entry

Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fld: move all files from procfs to debugfs

Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fid: move all files from procfs to debugfs

Signed-off-by: Dmitry Eremin <dmiter4ever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: remove unused sysctl enum definition

Since we are removing lustre sysctls, this enum is no longer needed.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lmv: Move suitable entries from procfs to sysfs

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lov: Move suitable variables from procfs to sysfs

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: move suitable values from procfs to sysfs

All single-value controls are moved from /proc/fs/lustre/osc/.../
to /sys/fs/lustre/osc/.../

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: move mdc-specific procfs files to sysfs

This moves max_rpcs_in_flight and max_pages_per_rpc to
/proc/fs/lustre/mdc/.../

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: make llite/lov and lmv symlinks

old proc code had /proc/sys/fs/lustre/llite/.../lov and lmv
dirs that contained name of the dir in lustre/lov and lustre/lmv
to better be able to find correct obd device there, but
I imagien a better solution would be to just create a symlink with
the same name. The name is then pointless and the target dir would
have uuid file just as if it was the old-style dir.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: Move common obd proc files to sysfs

This moves uuid display and also underlying fs statistics.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: Prepare for procfs to sysfs migration

Add necessary plumbing to register obd types and instances
under /sys/fs/lustre

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdecho: Remove procfs registration

obdecho client seems to be only registering useless proc values that
are of no use to anybody.
Remove them.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stagng/lustre/obdclass: Remove unused function lprocfs_rd_num_exports

This function is unused in client code.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove useless num_refs procfs variable

Every obd type registers it, but it's not really needed by anybody.
Remove all the supporting infrastructure too.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>