drm: meson: fix address type confusion

Casting a pointer to dma_addr_t produces a warning:

drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free':
drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
  priv->rdma.addr_phys = (dma_addr_t)NULL;

In this case, it's worse because the variable name has the suffix
'_phys', which often indicates a phys_addr_t rather than dma_addr_t,
i.e. yet another incompatible type.

Change it to use consistent naming and avoid NULL.

Fixes: 63fba242c464 ("drm/meson: add RDMA module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107214653.1173199-1-arnd@arndb.de

drm/gma500: remove set but not used variables 'hist_reg'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/psb_irq.c: In function psb_irq_turn_off_dpst:
drivers/gpu/drm/gma500/psb_irq.c:473:6:
warning: variable hist_reg set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227114811.14907-1-chenzhou10@huawei.com

drm/sun4i: drc: Make sure we enforce the clock rate

The DRC needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.

Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-2-maxime@cerno.tech

drm/sun4i: backend: Make sure we enforce the clock rate

The backend needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.

Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-1-maxime@cerno.tech

drm/exynos: dsi: Fix bridge chain handling

Commit 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the Exynos driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:

1/ list_splice() was used to move chain elements to our own internal
   chain, but list_splice() does not reset the source list to an empty
   state, leading to unexpected bridge hook calls when
   drm_bridge_chain_xxx() helpers were called by the core. Replacing
   the list_splice() call by list_splice_init() fixes this problem.

2/ drm_bridge_chain_xxx() helpers operate on the
   bridge->encoder->bridge_chain list, which is now empty. When the
   helper uses list_for_each_entry_reverse() we end up with no operation
   done which is not what we want. But that's even worse when the helper
   uses list_for_each_entry_from(), because in that case we end up in
   an infinite loop searching for the list head element which is no
   longer encoder->bridge_chain but exynos_dsi->bridge_chain. To address
   that problem we stop using the bridge chain helpers and call the
   hooks directly.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-3-boris.brezillon@collabora.com

drm/vc4: dsi: Fix bridge chain handling

Commit 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the VC4 driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:

1/ list_splice() was used to move chain elements to our own internal
   chain, but list_splice() does not reset the source list to an empty
   state, leading to unexpected bridge hook calls when
   drm_bridge_chain_xxx() helpers were called by the core. Replacing
   those list_splice() calls by list_splice_init() ones fixes this
   problem.

2/ drm_bridge_chain_xxx() helpers operate on the
   bridge->encoder->bridge_chain list, which is now empty. When the
   helper uses list_for_each_entry_reverse() we end up with no operation
   done which is not what we want. But that's even worse when the helper
   uses list_for_each_entry_from(), because in that case we end up in
   an infinite loop searching for the list head element which is no
   longer encoder->bridge_chain but vc4_dsi->bridge_chain. To address
   that problem we stop using the bridge chain helpers and call the
   hooks directly.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-2-boris.brezillon@collabora.com

video: fbdev: mmp: fix platform_get_irq.cocci warnings

Remove dev_err() messages after platform_get_irq*() failures.
Line 450 is redundant because platform_get_irq() already prints
an error.

Generated by: scripts/coccinelle/api/platform_get_irq.cocci

Fixes: dd90e9ae55a1 ("video: fbdev: mmp: add COMPILE_TEST support")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2001042140310.6944@hadrien

Revert "drm/bridge: Add a drm_bridge_state object"

This reverts commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state
object") which introduced a circular dependency between drm.ko and
drm_kms_helper.ko. Looks like the helper/core split is not appropriate
and fixing that is not simple.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-6-boris.brezillon@collabora.com

Revert "drm/bridge: Patch atomic hooks to take a drm_bridge_state"

This reverts commit f7619a58ef92 ("drm/bridge: Patch atomic hooks to
take a drm_bridge_state"). Commit 6ed7e9625fa6 ("drm/bridge: Add a
drm_bridge_state object") introduced a circular dependency between
drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the
whole thing was implemented. Let's revert all patches depending on the
bridge_state infrastructure for now.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com

Revert "drm/bridge: Add an ->atomic_check() hook"

This reverts commit b86d895524ab ("drm/bridge: Add an ->atomic_check()
hook"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state
object") introduced a circular dependency between drm.ko and
drm_kms_helper.ko which uncovered a misdesign in how the whole thing
was implemented. Let's revert all patches depending on the bridge_state
infrastructure for now.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-4-boris.brezillon@collabora.com

Revert "drm/bridge: Add the necessary bits to support bus format negotiation"

This reverts commit e351e4d5eaec ("drm/bridge: Add the necessary bits
to support bus format negotiation"). Commit 6ed7e9625fa6 ("drm/bridge:
Add a drm_bridge_state object") introduced a circular dependency
between drm.ko and drm_kms_helper.ko which uncovered a misdesign in
how the whole thing was implemented. Let's revert all patches depending
on the bridge_state infrastructure for now.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-3-boris.brezillon@collabora.com

Revert "drm/bridge: Fix a NULL pointer dereference in drm_atomic_bridge_chain_check()"

This reverts commit b18398c16e17 ("drm/bridge: Fix a NULL pointer
dereference in drm_atomic_bridge_chain_check()"). Commit 6ed7e9625fa6
("drm/bridge: Add a drm_bridge_state object") introduced a circular
dependency between drm.ko and drm_kms_helper.ko which uncovered a
misdesign in how the whole thing was implemented. Let's revert all
patches depending on the bridge_state infrastructure for now.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-2-boris.brezillon@collabora.com

drm: Set crc->opened to false before setting crc source to NULL.

to terminate the while-loop in drm_dp_aux_crc_work when
drm_dp_start/stop_crc are called in the hook to set crc source.

v3: set crc->opened to false without checking (Nick)
v2: Move spin_lock around entire crc->opened use (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726173743.11641-1-dingchen.zhang@amd.com

drm: remove the newline for CRC source name.

userspace may transfer a newline, and this terminating newline
is replaced by a '\0' to avoid followup issues.

'len-1' is the index to replace the newline of CRC source name.

v3: typo fix (Sam)

v2: update patch subject, body and format. (Sam)

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610134751.14356-1-dingchen.zhang@amd.com

drm: zte: Provide ddc symlink in vga connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-5-andrzej.p@collabora.com

drm: zte: Provide ddc symlink in hdmi connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-4-andrzej.p@collabora.com

drm/vc4: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-3-andrzej.p@collabora.com

drm/tegra: Provide ddc symlink in output connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-2-andrzej.p@collabora.com

drm/bridge: Fix a NULL pointer dereference in drm_atomic_bridge_chain_check()

drm_atomic_bridge_chain_check() callers can pass a NULL bridge. Let's
bail out before dereferencing the bridge pointer when that happens.

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b86d895524ab ("drm/bridge: Add an ->atomic_check() hook")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107113031.435604-1-boris.brezillon@collabora.com

drm/mgag200: Add module parameter to pin all buffers at offset 0

For hardware that does not interpret the startadd field correctly,
add the module parameter 'hw_bug_no_startadd', which enables the
workaround.

v3:
* style and typo fixes
v2:
* ask user for feedback if the option is active

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101950.11989-1-tzimmermann@suse.de

drm/vram-helper: Support struct drm_driver.gem_create_object

Drivers that what to allocate VRAM GEM objects with additional fields
can now do this by implementing struct drm_driver.gem_create_object.

v3:
* separately check allocation failure in if/else branches
  before upcast to gbo
v2:
* only cast to gbo within if branch; set gbo directly
  in else branch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-9-tzimmermann@suse.de

drm/vram-helper: Remove BO device from public interface

TTM is an implementation detail of the VRAM helpers and therefore
shouldn't be exposed to the callers. There's only one correct value
for the BO device anyway, which is the one stored in the DRM device.

So remove struct ttm_bo_device from the VRAM-helper interface and
use the device's VRAM manager unconditionally. The GEM initializer
function fails if the VRAM manager has not been initialized.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-8-tzimmermann@suse.de

drm/vram-helper: Remove interruptible flag from public interface

The flag 'interruptible', which is passed to various functions,
is always set to be false. Remove it and hard-code the value.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-7-tzimmermann@suse.de

drm/bridge: Add the necessary bits to support bus format negotiation

drm_bridge_state is extended to describe the input and output bus
configurations. These bus configurations are exposed through the
drm_bus_cfg struct which encodes the configuration of a physical
bus between two components in an output pipeline, usually between
two bridges, an encoder and a bridge, or a bridge and a connector.

The bus configuration is stored in drm_bridge_state separately for
the input and output buses, as seen from the point of view of each
bridge. The bus configuration of a bridge output is usually identical
to the configuration of the next bridge's input, but may differ if
the signals are modified between the two bridges, for instance by an
inverter on the board. The input and output configurations of a
bridge may differ if the bridge modifies the signals internally,
for instance by performing format conversion, or*modifying signals
polarities.

Bus format negotiation is automated by the core, drivers just have
to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they
want to take part to this negotiation. Negotiation happens in reverse
order, starting from the last element of the chain (the one directly
connected to the display) up to the first element of the chain (the one
connected to the encoder).
During this negotiation all supported formats are tested until we find
one that works, meaning that the formats array should be in decreasing
preference order (assuming the driver has a preference order).

Note that the bus format negotiation works even if some elements in the
chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks.
In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets
the previous bridge element decide what to do (most of the time, bridge
drivers will pick a default bus format or extract this piece of
information from somewhere else, like a FW property).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-5-narmstrong@baylibre.com

drm/bridge: Add an ->atomic_check() hook

So that bridge drivers have a way to check/reject an atomic operation.
The drm_atomic_bridge_chain_check() (which is just a wrapper around
the ->atomic_check() hook) is called in place of
drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented,
the core falls back on ->mode_fixup(), so the behavior should stay
the same for existing bridge drivers).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-4-narmstrong@baylibre.com

drm/bridge: Patch atomic hooks to take a drm_bridge_state

This way the drm_bridge_funcs interface is consistent with the rest of
the subsystem.

The only driver implementing those hooks (analogix DP) is patched too.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-3-narmstrong@baylibre.com

drm/bridge: Add a drm_bridge_state object

One of the last remaining objects to not have its atomic state.

This is being motivated by our attempt to support runtime bus-format
negotiation between elements of the bridge chain.
This patch just paves the road for such a feature by adding a new
drm_bridge_state object inheriting from drm_private_obj so we can
re-use some of the existing state initialization/tracking logic.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-2-narmstrong@baylibre.com

Revert "drm: atmel-hlcdc: enable sys_clk during initalization."

This reverts commit d2c755e66617620b729041c625a6396c81d1231c
("drm: atmel-hlcdc: enable sys_clk during initalization."). With
commit "drm: atmel-hlcdc: enable clock before configuring timing engine"
there is no need for this patch. Code is also simpler.

Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-7-git-send-email-claudiu.beznea@microchip.com

drm: atmel-hlcdc: prefer a lower pixel-clock than requested

The intention was to only select a higher pixel-clock rate than the
requested, if a slight overclocking would result in a rate significantly
closer to the requested rate than if the conservative lower pixel-clock
rate is selected. The fixed patch has the logic the other way around and
actually prefers the higher frequency. Fix that.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 9946a3a9dbed ("drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested")
Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: <stable@vger.kernel.org> # v4.20+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-6-git-send-email-claudiu.beznea@microchip.com

drm: atmel-hlcdc: enable clock before configuring timing engine

Changing pixel clock source without having this clock source enabled
will block the timing engine and the next operations after (in this case
setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb()
will fail). It is recomended (although in datasheet this is not present)
to actually enabled pixel clock source before doing any changes on timing
enginge (only SAM9X60 datasheet specifies that the peripheral clock and
pixel clock must be enabled before using LCD controller).

Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> # v4.0+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-3-git-send-email-claudiu.beznea@microchip.com

drm: atmel-hlcdc: use double rate for pixel clock only if supported

Doubled system clock should be used as pixel cock source only if this
is supported. This is emphasized by the value of
atmel_hlcdc_crtc::dc::desc::fixed_clksrc.

Fixes: a6eca2abdd42 ("drm: atmel-hlcdc: add config option for clock selection")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-2-git-send-email-claudiu.beznea@microchip.com

dt-bindings: fix warnings in xinpeng,xpp055c272.yaml

The reg property in the example caused following warnings:

xinpeng,xpp055c272.example.dts:20.17-27: Warning (reg_format): /example-0/dsi@ff450000/panel@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)

xinpeng,xpp055c272.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
xinpeng,xpp055c272.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
xinpeng,xpp055c272.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
xinpeng,xpp055c272.example.dts:18.21-24.15: Warning (avoid_default_addr_size): /example-0/dsi@ff450000/panel@0: Relying on default #address-cells value
xinpeng,xpp055c272.example.dts:18.21-24.15: Warning (avoid_default_addr_size): /example-0/dsi@ff450000/panel@0: Relying on default #size-cells value

Added #address-cells and #size-cells to silence the warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200106181731.GA24294@ravnborg.org

drm/bridge: cdns: remove set but not used variable 'nlanes'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/bridge/cdns-dsi.c: In function ‘cdns_dsi_mode2cfg’:
drivers/gpu/drm/bridge/cdns-dsi.c:515:11: warning: variable ‘nlanes’
set but not used [-Wunused-but-set-variable]

It is never used, and so can be removed.

Signed-off-by: yu kuai <yukuai3@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191226121415.39483-1-yukuai3@huawei.com

drm/bridge: cdns: remove set but not used variable 'bpp'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/bridge/cdns-dsi.c: In function
‘cdns_dsi_bridge_enable’:
drivers/gpu/drm/bridge/cdns-dsi.c:788:6: warning: variable ‘bpp’
set but not used [-Wunused-but-set-variable]

It is never used, and so can be removed.

Signed-off-by: yu kuai <yukuai3@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191226121207.2099-1-yukuai3@huawei.com

drm: meson: Remove unneeded semicolon

Fixes coccicheck warning:

drivers/gpu/drm/meson/meson_crtc.c:360:3-4: Unneeded semicolon
drivers/gpu/drm/meson/meson_plane.c:181:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1576468701-69717-1-git-send-email-zhengbin13@huawei.com

drm: bridge: dw-hdmi: constify copied structure

The dw_hdmi_hw structure is only copied into another structure,
so make it const.

The opportunity for this change was found using Coccinelle.

Fixes: 7ed6c665e19d ("drm: bridge/dw_hdmi-ahb-audio: add audio driver")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1577864614-5543-16-git-send-email-Julia.Lawall@inria.fr

drm/hisilicon/hibmc: Export VRAM MM information to debugfs

This change makes information about VRAM consumption available on
debugfs. See

  /sys/kernel/debug/dri/0/vram-mm

for an overview of how VRAM is being used.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-6-tzimmermann@suse.de

drm/hisilicon/hibmc: Implement hibmc_dumb_create() with generic helpers

The hibmc driver aligns scanlines to 16 bytes. By using the new pitch_align
argument of drm_gem_vram_fill_create_dumb(), convert hibmc over.

v2:
* move changes to VRAM helpers into separate patch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-5-tzimmermann@suse.de

drm/vram: Support scanline alignment for dumb buffers

Adding the pitch alignment as an argument to
drm_gem_vram_fill_create_dumb() allows to align scanlines to certain
offsets. A value of 0 disables scanline pitches.

v3:
* only do power-of-2 test if pitch_align given; fails otherwise
* mgag200: call drm_gem_vram_fill_create_dumb() with pitch_align
v2:
* split of patch from related hibmc changes
* test if scanline pitch is power of 2

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-4-tzimmermann@suse.de

drm/hisilicon/hibmc: Replace struct hibmc_framebuffer with generic code

The hibmc driver's struct hibmc_framebuffer stores a DRM framebuffer
with an associated GEM object. This functionality is also provided by
generic code. Switch hibmc over.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-3-tzimmermann@suse.de

drm/hisilicon/hibmc: Switch to generic fbdev emulation

There's nothing special about hibmc's fbdev emulation that is not
provided by the generic implementation. Switch over and remove the
driver's code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-2-tzimmermann@suse.de

drm: rockchip: rk3066_hdmi: set edid fifo address

Fix edid reading error when edid's block > 2.

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211203417.19448-1-jbx6244@gmail.com

drm/rockchip: lvds: Add PX30 support

Introduce PX30 LVDS support. This means adding the relevant helper
functions, a specific probe and also the initialization of a specific
PHY.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-10-miquel.raynal@bootlin.com

Merge drm/drm-next into drm-misc-next

Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/rockchip: lvds: move hardware-specific functions together

Reorganize a bit the functions order to clarify the driver and separate
hardware independent and specific functions a bit. This change only moves
functions around, there is no functional change.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[adapted to recent drm_panel_get_modes() param change ]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-9-miquel.raynal@bootlin.com

drm/rockchip: lvds: improve error handling in helper functions

Return errors instead of returning void from internal helpers. When
these helpers are called, check the returned value and print an error
message in this case and not blindly continue.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-8-miquel.raynal@bootlin.com

drm/rockchip: lvds: Create an RK3288 specific probe function

The probe function is highly adapted to the RK3288 specificities, move
all specific bits into an "rk3288_probe" function, also part of the
platform data.

The goal is to ease the addition of new flavors of Rockchip LVDS IPs.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-7-miquel.raynal@bootlin.com

drm/rockchip: lvds: Change platform data to hold helper_funcs pointer

Prepare the introduction of PX30 support by using
drm_encoder_helper_funcs as platform data instead of multiple register
names which are specific to rk3288 and not generic to all Rockchip
IPs. This way adding support for a new flavor of a similar IP will be
a matter of adding the relevant helper funcs.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-6-miquel.raynal@bootlin.com

drm/rockchip: lvds: Harmonize function names

Prepare the introduction of PX30 support by clarifying the function
prefixes.

We continue to prefix with 'rockchip_lvds_' generic functions that are
not specific to a single hardware. Functions implying hardware
modifications are now prefixed with 'rk3288_lvds_'.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-5-miquel.raynal@bootlin.com

drm/rockchip: lvds: Fix indentation of a #define

Fix a #define indentation before adding more lines.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-4-miquel.raynal@bootlin.com

dt-bindings: display: rockchip-lvds: Document PX30 PHY

PX30 SoCs use a single PHY shared by two display pipelines: MIPI DSI
and LVDS. In the case of the LVDS IP, document the possibility to fill
a PHY handle.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-3-miquel.raynal@bootlin.com

dt-bindings: display: rockchip-lvds: Declare PX30 compatible

Document the PX30 LVDS compatible.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-2-miquel.raynal@bootlin.com

drm/panel: add panel driver for Leadtek LTK500HD1829

The LTK500HD1829 is 5.5" DSI display.

v5:
  - Fix some trivial checkpatch warnings while applying (sam)

changes in v4:
- drop error message if backlight not found, no other panel
  does that and if needed it should live in drm_panel_of_backlight
changes in v3:
- drop one more overlooked panel->drm access

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112641.30647-3-heiko@sntech.de

dt-bindings: display: panel: Add binding document for Leadtek LTK500HD1829

The LTK500HD1829 is a 5.0" 720x1280 DSI display.

v3:
  - fixed example by adding address,size-cells (sam)

changes in v2:
- fix id (Maxime)
- drop port (Maxime)

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112641.30647-2-heiko@sntech.de

dt-bindings: Add vendor prefix for Leadtek Technology

Shenzhen Leadtek Technology Co., Ltd. produces for example display
and touch panels.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112641.30647-1-heiko@sntech.de

drm/panel: add panel driver for Xinpeng XPP055C272 panels

Base on the somewhat similar Rocktech driver but adapted for
panel-specific init of the XPP055C272.

changes in v5:
- drop error message when backlight not found, no other panel
  does that and if needed it should live in drm_panel_of_backlight
changes in v4:
  none
changes in v3:
- remove wrong negative sync flags from display-mode to fix a display
  artifact of the output getting move a tiny bit to the right
changes in v2:
- move to drm-panel-internal backlight handling (Sam)
- adapt to changes that happened to drm_panel structs+functions (Sam)
- sort includes (Sam)
- drop unnecessary DRV_NAME constant (Sam)
- do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on
  in panel prepare (not init_sequence) to keep symmetric (Sam)

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112907.30758-3-heiko@sntech.de

dt-bindings: display: panel: Add binding document for Xinpeng XPP055C272

The XPP055C272 is a 5.5" 720x1280 DSI display.

changes in v4:
- fix id (Maxime)
- drop port (Maxime)
changes in v2:
- add size info into binding title (Sam)
- add more required properties (Sam)

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112907.30758-2-heiko@sntech.de

dt-bindings: Add vendor prefix for Xinpeng Technology

Shenzhen Xinpeng Technology Co., Ltd produces for example display panels.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224112907.30758-1-heiko@sntech.de

omapfb/dss: remove unneeded conversions to bool

Found with scripts/coccinelle/misc/boolconv.cocci.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016180424.23907-1-afd@ti.com

video: pxafb: Use devm_platform_ioremap_resource() in pxafb_probe()

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a1b804b1-43c2-327a-d6d1-df49aebec680@web.de

video: ocfb: Use devm_platform_ioremap_resource() in ocfb_probe()

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/61b75aa6-ff92-e0ed-53f2-50a95d93d1f6@web.de

video: fbdev: fsl-diu-fb: mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

Fix the following warnings (Building: mpc512x_defconfig powerpc):

drivers/video/fbdev/fsl-diu-fb.c: In function ‘fsl_diu_ioctl’:
./include/linux/device.h:1750:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
  _dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__)
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/video/fbdev/fsl-diu-fb.c:1287:3: note: in expansion of macro ‘dev_warn’
   dev_warn(info->dev,
   ^~~~~~~~
drivers/video/fbdev/fsl-diu-fb.c:1290:2: note: here
  case MFB_SET_PIXFMT:
  ^~~~
In file included from ./include/linux/acpi.h:15:0,
                 from ./include/linux/i2c.h:13,
                 from ./include/uapi/linux/fb.h:6,
                 from ./include/linux/fb.h:6,
                 from drivers/video/fbdev/fsl-diu-fb.c:20:
./include/linux/device.h:1750:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
  _dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__)
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/video/fbdev/fsl-diu-fb.c:1296:3: note: in expansion of macro ‘dev_warn’
   dev_warn(info->dev,
   ^~~~~~~~
drivers/video/fbdev/fsl-diu-fb.c:1299:2: note: here
  case MFB_GET_PIXFMT:
  ^~~~

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Timur Tabi <timur@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911113604.GA31512@embeddedor

fbdev: matrox: make array wtst_xlat static const, makes object smaller

Don't populate the array wtst_xlat on the stack but instead make it
static const. Makes the object code smaller by 89 bytes.

Before:
   text    data     bss     dec     hex filename
  14347     840       0   15187    3b53 fbdev/matrox/matroxfb_misc.o

After:
   text    data     bss     dec     hex filename
  14162     936       0   15098    3afa fbdev/matrox/matroxfb_misc.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
[b.zolnierkie: use u8 while at it (suggested by Ville Syrjälä)]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906181114.31414-1-colin.king@canonical.com

fbdev/sa1100fb: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904115754.21612-1-yuehaibing@huawei.com

fbdev: s3c-fb: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904115523.25068-1-yuehaibing@huawei.com

fbdev: omapfb: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904115406.23880-1-yuehaibing@huawei.com

video/fbdev/68328fb: Remove dead code

This is dead code since 3.15. If their is no plan to
use it further, these can be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567428544-8620-1-git-send-email-jrdr.linux@gmail.com

pxa168fb: Fix the function used to release some memory in an error handling path

In the probe function, some resources are allocated using 'dma_alloc_wc()',
they should be released with 'dma_free_wc()', not 'dma_free_coherent()'.

We already use 'dma_free_wc()' in the remove function, but not in the
error handling path of the probe function.

Also, remove a useless 'PAGE_ALIGN()'. 'info->fix.smem_len' is already
PAGE_ALIGNed.

Fixes: 638772c7553f ("fb: add support of LCD display controller on pxa168/910 (base layer)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
CC: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190831100024.3248-1-christophe.jaillet@wanadoo.fr

fbdev: fbmem: avoid exporting fb_center_logo

The variable is only ever used from fbcon.c which is linked into the
same module. Therefore, the export is not needed.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827110854.12574-4-peda@axentia.se

fbdev: fbmem: allow overriding the number of bootup logos

Probably most useful if you want no logo at all, or if you only want one
logo regardless of how many CPU cores you have.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827110854.12574-3-peda@axentia.se

fbdev: fix numbering of fbcon options

Three shall be the number thou shalt count, and the number of the
counting shall be three. Four shalt thou not count...

One! Two! Five!

Fixes: efb985f6b265 ("[PATCH] fbcon: Console Rotation - Add framebuffer console documentation")
Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827110854.12574-2-peda@axentia.se

video: fbdev: mmp: fix sparse warnings about using incorrect types

Use ->screen_buffer instead of ->screen_base in mmpfb driver.

[ Please see commit 17a7b0b4d974 ("fb.h: Provide alternate screen_base
  pointer") for details. ]

Also fix all other sparse warnings about using incorrect types in
mmp display subsystem.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee796b43-f200-d41a-b18c-ae3d6bcaaa67@samsung.com

video: fbdev: mmp: add COMPILE_TEST support

Add COMPILE_TEST support to mmp display subsystem for better compile
testing coverage.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d21a19ea-8c18-80df-ae79-76de7c5ee67c@samsung.com

video: fbdev: mmp: remove duplicated MMP_DISP dependency

This dependency is already present in higher level Kconfig file
(drivers/video/fbdev/mmp/Kconfig).

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eb28587c-4f8f-f044-1b8b-317a8d7967aa@samsung.com

Merge tag 'drm-misc-next-2020-01-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:
- Commandline parser: Add support for panel orientation, and per-mode options.
- Fix IOCTL naming for dma-buf heaps.

Cross-subsystem Changes:
- Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi.
- Change DMA-BUF system-heap's name to system.
- Fix leak in error handling in dma_heap_ioctl(), and make a symbol static.
- Fix udma-buf cpu access.
- Fix ti devicetree bindings.

Core Changes:
- Add CTA-861-G modes with VIC >= 193.
- Change error handling and remove bug_on in *drm_dev_init.
- Export drm_panel_of_backlight() correctly once more.
- Add support for lvds decoders.
- Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo.

Driver Changes:
- Add support for dsi/px30 to rockchip.
- Add fb damage support to virtio.
- Use dma_resv locking wrappers in vc4, msm, etnaviv.
- Make functions in virtio static, and perform some simplifications.
- Add suspend support to sun4i.
- Add A64 mipi dsi support to sun4i.
- Add runtime pm suspend to komeda.
- Associated driver fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efc11139-1653-86bc-1b0f-0aefde219850@linux.intel.com

drm/mipi_dbi: Fix off-by-one bugs in mipi_dbi_blank()

When configuring the frame memory window, the last column and row
numbers are written to the column resp. page address registers.  These
numbers are thus one less than the actual window width resp. height.

While this is handled correctly in mipi_dbi_fb_dirty() since commit
03ceb1c8dfd1e293 ("drm/tinydrm: Fix setting of the column/page end
addresses."), it is not in mipi_dbi_blank().  The latter still forgets
to subtract one when calculating the most significant bytes of the
column and row numbers, thus programming wrong values when the display
width or height is a multiple of 256.

Fixes: 02dd95fe31693626 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230130604.31006-1-geert+renesas@glider.be

drm/panel: declare variable as __be16

Declare the temp variable as __be16 to address the following sparse
warning:
drivers/gpu/drm/panel/panel-lg-lg4573.c:45:20: warning: incorrect type in initializer (different base types)
drivers/gpu/drm/panel/panel-lg-lg4573.c:45:20:    expected unsigned short [unsigned] [usertype] temp
drivers/gpu/drm/panel/panel-lg-lg4573.c:45:20:    got restricted __be16 [usertype] <noident>

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230195609.12386-1-wambui.karugax@gmail.com

drm/komeda: Add runtime_pm support

- Add pm_runtime_get/put to crtc_enable/disable along with the real
  display usage
- Add runtime_get/put to register_show, since register_show() will
  access register, need to wakeup HW.
- For the case that PM is not enabled or configured, manually wakeup HW

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212074756.14678-1-james.qian.wang@arm.com

Merge tag 'drm-intel-next-2019-12-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

i915 features for v5.6:

- Separate hardware and uapi state (Maarten)

- Expose a number of sprite and plane formats (Ville)

- DDC symlink in HDMI connector sysfs directory (Andrzej Pietrasiewicz)

- Improve obj->mm.lock nesting lock annotation (Daniel)
  (Includes lockdep changes)

- Selftest improvements across the board (Chris)

- ICL/TGL VDSC support on DSI (Jani, Vandita)

- TGL DSB fixes (Animesh, Lucas, Tvrtko)

- VBT parsing improvements and fixes (Lucas, Matt, José, Jani, Dan Carpenter)

- Fix LPSS vs. PMIC PWM backlight use on BYT/CHT (Hans)
  (Includes ACPI+MFD changes)

- Display state, crtc, plane code refactoring (Ville)

- Set opregion chpd value to indicate the driver handles hotplug (Hans de Goede)

- DSI updates and fixes, TGL pipe D support, port mapping (José, Jani, Vandita)

- Make HDCP 2.2 support cover CFL (Juston Li)

- Fix CML PCI IDs and ULT (Shawn Lee)

- CMP-V PCH fix (Imre)

- TGL: Add another TGL PCH ID (James)

- EHL/JSL: Add new PCI IDs (James)

- Rename pipe update tracepoints (Ville)

- Fix FBC on GLK+ (Ville)

- GuC fixes and improvements (Daniele, Don Hiatt, Stuart Summers, Matthew Brost)

- Display debugfs improvements (Ville)

- Hotplug/irq fixes (Matt)

- PSR fixes and improvements (José)

- DRM_I915_GEM_MMAP_OFFSET ioctl (Abdiel)

- Static analysis fixes (Colin Ian King)

- Register sysctl path globally (Venkata Sandeep Dhanalakota)

- Introduce new macros for tracing (Venkata Sandeep Dhanalakota)

- Migrate gt towards intel_uncore_read/write (Andi)

- Add rps frequency translation helpers (Andi)

- Fix TGL transcoder clock off sequence (José)

- Fix TGL port A audio (Kai Vehmanen)

- TGL render decompression (DK)

- GEM/GT improvements and fixes across the board (Chris)

- Couple of backmerges (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 24 Dec 2019 03:20:48 AM AEST
# gpg:                using RSA key D398079D26ABEE6F
# gpg: Good signature from "Jani Nikula <jani.nikula@intel.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1565 A65B 77B0 632E 1124  E59C D398 079D 26AB EE6F

# Conflicts:
# drivers/gpu/drm/i915/display/intel_fbc.c
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/i915_gem.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfr3rkry.fsf@intel.com

drm/komeda: Add event handling for EMPTY/FULL

EMPTY/FULL are HW input/output FIFO condition identifer, which are
useful information for addressing the problem, so expose them.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212072737.30116-1-james.qian.wang@arm.com

drm/sun4i: dsi: Add Allwinner A64 MIPI DSI support

The MIPI DSI controller in Allwinner A64 is similar to A33.

But unlike A33, A64 doesn't have DSI_SCLK gating so add compatible
for Allwinner A64 with uninitialized has_mod_clk driver.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-6-jagan@amarulasolutions.com

drm/sun4i: dsi: Handle bus clock via regmap_mmio_attach_clk

regmap has special API to enable the controller bus clock while
initializing register space, and current driver is using
devm_regmap_init_mmio_clk which require to specify bus
clk_id argument as "bus"

But, the usage of clocks are varies between different Allwinner
DSI controllers. Clocking in A33 would need bus and mod clocks
where as A64 would need only bus clock.

Since A64 support only single bus clock, it is optional to
specify the clock-names on the controller device tree node.
So using NULL on clk_id would get the attached clock.

To support clk_id as "bus" and "NULL" during clock enablement
between controllers, this patch add generic code to handle
the bus clock using regmap_mmio_attach_clk with associated
regmap APIs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-5-jagan@amarulasolutions.com

drm/sun4i: dsi: Get the mod clock for A31

As per the user manual, look like mod clock is not mandatory
for all Allwinner MIPI DSI controllers, it is connected to
CLK_DSI_SCLK for A31 and not available in A64.

So, add compatible check for A31 and get mod clock accordingly.

Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-4-jagan@amarulasolutions.com

dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback)

The MIPI DSI PHY controller on Allwinner A64 is similar
on the one on A31.

Add A64 compatible and append A31 compatible as fallback.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-3-jagan@amarulasolutions.com

dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller

The MIPI DSI controller in Allwinner A64 is similar to A33.

But unlike A33, A64 doesn't have DSI_SCLK gating so it is valid
to have separate compatible for A64 on the same driver.

DSI_SCLK uses mod clock-names on dt-bindings, so the same
is not required for A64.

On that note
- A64 require minimum of 1 clock like the bus clock
- A33 require minimum of 2 clocks like both bus, mod clocks

So, update dt-bindings so-that it can document both A33,
A64 bindings requirements.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222132229.30276-2-jagan@amarulasolutions.com

drm: sun4i: Add support for suspending the display driver

Shut down the display engine during suspend.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029112846.3604925-1-megous@megous.com

drm/i915: Update DRIVER_DATE to 20191223

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Mark the GEM context link as RCU protected

The only protection for intel_context.gem_cotext is granted by RCU, so
annotate it as a rcu protected pointer and carefully dereference it in
the few occasions we need to use it.

Fixes: 9f3ccd40acf4 ("drm/i915: Drop GEM context as a direct link from i915_request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222233558.2201901-1-chris@chris-wilson.co.uk

drm/i915: Introduce a vma.kref

Start introducing a kref on i915_vma in order to protect the vma unbind
(i915_gem_object_unbind) from a parallel destruction (i915_vma_parked).
Later, we will use the refcount to manage all access and turn i915_vma
into a first class container.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222210256.2066451-2-chris@chris-wilson.co.uk

drm/i915: Add a simple is-bound check before unbinding

Only acquire the various atomic references required to unbind the vma if
we do need to unbind the vma.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191222210256.2066451-1-chris@chris-wilson.co.uk

drm/i915: Make sure CCS YUV semiplanar format checks work

For CCS formats, the current DRM core check for YUV semiplanar formats
doesn't work; use an i915 specific function for that.

v2: Fix checkpatch warnings.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-11-imre.deak@intel.com

drm/i915: Make sure Y slave planes get all the required state

Y planes program the offset and stride of the AUX plane, so make sure we
copy the required info for this into their plane state.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-10-imre.deak@intel.com

drm/i915: Skip rotated offset adjustment for unsupported modifiers

During framebuffer creation, we pre-compute offsets for 90/270 plane
rotation. However, only Y and Yf modifiers support 90/270 rotation. So,
skip the calculations for other modifiers.

To keep the gem buffer size check still working for tiled planes, factor
out the logic needed for rotation setup and skip only this part for
tiled planes other than Y/Yf.

v2: Add a bounds check WARN for the rotation info array.
v3: Keep the gem buffer size check working for tiled planes.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-9-imre.deak@intel.com

drm/i915/tgl: Make sure FBs have a correct CCS plane stride

The CCS plane stride must be fixed on TGL, as it's not configurable for
the display. Instead the HW has a hardwired logic to determine it from
the main plane stride. Make sure userspace passes in the correct stride.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-8-imre.deak@intel.com

drm/i915/tgl: Gen-12 render decompression

Gen-12 display decompression operates on Y-tiled compressed main surface.
The CCS is linear and has 4 bits of metadata for each main surface cache
line pair, a size ratio of 1:256. Gen-12 display decompression is
incompatible with buffers compressed by earlier GPUs, so make use of a new
modifier to identify gen-12 compression. Another notable change is that
render decompression is supported on all planes except cursor and on all
pipes. Start by adding render decompression support for [A,X]BGR888 pixel
formats.

v2: Fix checkpatch warnings (Lucas)
v3:
Rebase, disable color clear, styling changes and modify
intel_tile_width_bytes and intel_tile_height to handle linear CCS
v4:
- Use format block descriptors and the i915 specific func to get the
  subsampling for each color plane.
- Use helpers to convert between CCS and main planes.
v5:
- Fix subsampling returned by intel_fb_plane_get_subsampling() for
  the CCS plane of the first plane.
v6:
- Rebased on v2 of patch 4.
v7:
- Fix plane dimensions during FB check.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> (v6)
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-7-imre.deak@intel.com

drm/framebuffer: Format modifier for Intel Gen-12 render compression

Gen-12 has a new compression format, add a new modifier to indicate that.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-6-imre.deak@intel.com

drm/i915: Add helpers to select correct ccs/aux planes

Using helpers instead of open coding this to select a CCS plane for a
main plane makes the code cleaner and less error-prone when the location
of CCS plane can be different based on the format (packed vs. YUV
semiplanar). The same applies to selecting an AUX plane which can be a
UV plane (for an uncompressed YUV semiplanar format), or a CCS plane.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-5-imre.deak@intel.com

drm/i915: Extract framebufer CCS offset checks into a function

intel_fill_fb_info() has grown quite large and wrapping the offset checks
into a separate function makes the loop a bit easier to follow.

v2: Skip the check for non-CCS planes. (Mika)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-4-imre.deak@intel.com

drm/i915: Move CCS stride alignment W/A inside intel_fb_stride_alignment

Easier to read if all the alignment changes are in one place and contained
within a function.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-3-imre.deak@intel.com

drm/i915: Use intel_tile_height() instead of re-implementing

intel_tile_dims() computes tile height using size and width, when there
is already a function to do just that - intel_tile_height()

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-2-imre.deak@intel.com