Jo-Philipp Wich [Tue, 24 May 2011 09:12:50 +0000 (09:12 +0000)]
dnsmasq: allow hostname assignment without static lease The attached patch for dnsmasq.init allows to assign a hostname to a particular mac-address. It's useful to override the client supplied hostname, especially if the client does not supply a hostname at all.
It corresponds to the following example in dnsmasq.conf.example:
# Always set the name of the host with hardware address
# 11:22:33:44:55:66 to be "fred"
#dhcp-host=11:22:33:44:55:66,fred
Regards
Mathias
SVN-Revision: 26983
Jo-Philipp Wich [Tue, 24 May 2011 08:14:29 +0000 (08:14 +0000)]
package u32 match and TEE target, patches by Maxim Uvarov
SVN-Revision: 26977
Jo-Philipp Wich [Sun, 22 May 2011 16:53:09 +0000 (16:53 +0000)]
ncurses: enable C++ bindings (#9442)
SVN-Revision: 26970
Jo-Philipp Wich [Sun, 22 May 2011 12:02:35 +0000 (12:02 +0000)]
iw: fix calculation of fractional multicast rates like 5.5Mbps due to wrong operator precedence
SVN-Revision: 26968
Felix Fietkau [Fri, 20 May 2011 16:21:30 +0000 (16:21 +0000)]
add LD_LIBRARY to cmake.mk
Otherwise cmake programs try to link with host ld.so
Signed-off-by: Jan Willies <jan@willies.info>
SVN-Revision: 26963
Jo-Philipp Wich [Fri, 20 May 2011 13:45:40 +0000 (13:45 +0000)]
firewall: explictely mention network in default configuration, makes it less confusing
SVN-Revision: 26961
Florian Fainelli [Fri, 20 May 2011 10:06:25 +0000 (10:06 +0000)]
add support for BT Voyager 2110 (#8810)
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959
Florian Fainelli [Fri, 20 May 2011 10:06:22 +0000 (10:06 +0000)]
add support for DSL-2640B rev B2
Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958
Florian Fainelli [Fri, 20 May 2011 10:06:18 +0000 (10:06 +0000)]
refresh patches
SVN-Revision: 26957
Florian Fainelli [Fri, 20 May 2011 10:06:15 +0000 (10:06 +0000)]
add support for D-Link DVA-G3810BN/TL
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956
Florian Fainelli [Fri, 20 May 2011 10:06:11 +0000 (10:06 +0000)]
refresh 2.6.37 patches
SVN-Revision: 26955
Florian Fainelli [Fri, 20 May 2011 10:06:07 +0000 (10:06 +0000)]
add support for BT Voyager 2500 (#9070)
SVN-Revision: 26954
Florian Fainelli [Fri, 20 May 2011 10:06:04 +0000 (10:06 +0000)]
add support for USR9108 LEDs (#9372)
SVN-Revision: 26953
Florian Fainelli [Fri, 20 May 2011 10:06:00 +0000 (10:06 +0000)]
add GT701 LEDs support (#9382)
SVN-Revision: 26952
Felix Fietkau [Thu, 19 May 2011 10:08:02 +0000 (10:08 +0000)]
broadcom-wl: fix wild ssb_device accesses as pci_dev for legacy pci dma api
broadcom-wl driver bound to ssb device with ssb driver probe
have osh handle struct pdev pointer value initialized with
ssb_device pointer. Later on pdev is used with legacy pci
dma api as pci_dev thus causing oops sometimes.
The patch replaces legacy pci dma api and pass relevant
device struct pointer to avoid crashes.
Signed-off-by: George Kashperko <george@znau.edu.ua>
SVN-Revision: 26949
Felix Fietkau [Thu, 19 May 2011 10:07:57 +0000 (10:07 +0000)]
broadcom-wl: fix uninitialized variable
It was causing an occasional kernel oops.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 26948
Felix Fietkau [Thu, 19 May 2011 09:33:45 +0000 (09:33 +0000)]
ath9k: fix some locking issues in the tx fifo cleanup patch
SVN-Revision: 26947
Daniel Dickinson [Thu, 19 May 2011 04:29:40 +0000 (04:29 +0000)]
Simple typo for kmod- prefix in alix2 target makefile.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26945
Hamish Guthrie [Wed, 18 May 2011 12:43:54 +0000 (12:43 +0000)]
Remove override of max80211.sh
SVN-Revision: 26936
Felix Fietkau [Wed, 18 May 2011 12:03:08 +0000 (12:03 +0000)]
ath9k: clean up tx fifo handling on ar9380 based hardware
SVN-Revision: 26934
Felix Fietkau [Wed, 18 May 2011 12:03:04 +0000 (12:03 +0000)]
ath9k: fix a small race condition in the tx_last_beacon patch
SVN-Revision: 26933
Hamish Guthrie [Wed, 18 May 2011 11:50:36 +0000 (11:50 +0000)]
Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh
SVN-Revision: 26932
Jo-Philipp Wich [Wed, 18 May 2011 09:50:06 +0000 (09:50 +0000)]
ipcalc.sh CIDR notation Hi,
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
SVN-Revision: 26930
Felix Fietkau [Tue, 17 May 2011 18:23:50 +0000 (18:23 +0000)]
mac80211: sync the CONFIG_ATH5K_DEBUG make override with the buildflags override (thx, KanjiMonster)
SVN-Revision: 26927
Felix Fietkau [Tue, 17 May 2011 12:54:45 +0000 (12:54 +0000)]
metadata: do not emit feature flag selects for targets which have subtargets - fixes a buildbot error cause by ssb not being blacklisted for lantiq falcon
SVN-Revision: 26926
Matteo Croce [Tue, 17 May 2011 11:15:24 +0000 (11:15 +0000)]
ar71xx: don't probe the LAN PHY
SVN-Revision: 26924
Felix Fietkau [Tue, 17 May 2011 11:14:15 +0000 (11:14 +0000)]
ath9k: implement tx_last_beacon() to allow mac80211 to respond to probe requests in ad-hoc mode without creating too much spam
SVN-Revision: 26923
Matteo Croce [Tue, 17 May 2011 11:12:56 +0000 (11:12 +0000)]
ar71xx: detect link on LAN ports
SVN-Revision: 26922
John Crispin [Tue, 17 May 2011 10:48:37 +0000 (10:48 +0000)]
* add missing aes dependency to mv_cesa
Signed-off-by: Jan Willies <jan@willies.info>
SVN-Revision: 26920
John Crispin [Tue, 17 May 2011 10:35:14 +0000 (10:35 +0000)]
* adds support for Artec Thincan
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>
SVN-Revision: 26919
John Crispin [Tue, 17 May 2011 10:33:46 +0000 (10:33 +0000)]
* adds mkelfimage
SVN-Revision: 26918
Felix Fietkau [Tue, 17 May 2011 08:37:38 +0000 (08:37 +0000)]
ath9k: fix ad-hoc nexttbtt calculation, which broke beacon transmission in some instances
SVN-Revision: 26915
Felix Fietkau [Mon, 16 May 2011 21:50:30 +0000 (21:50 +0000)]
ath9k: fix issues with ad-hoc beacon slot selection
SVN-Revision: 26913
Felix Fietkau [Mon, 16 May 2011 21:50:26 +0000 (21:50 +0000)]
mac80211: update to 2011-05-13
SVN-Revision: 26912
Felix Fietkau [Mon, 16 May 2011 21:50:20 +0000 (21:50 +0000)]
kernel: backport some ssb changes to support a mac80211 update
SVN-Revision: 26911
Jo-Philipp Wich [Sun, 15 May 2011 21:28:12 +0000 (21:28 +0000)]
remove an accidentally copied comment from the option.ko device patch
SVN-Revision: 26908
Jo-Philipp Wich [Sun, 15 May 2011 19:17:31 +0000 (19:17 +0000)]
add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422)
SVN-Revision: 26906
Hauke Mehrtens [Sun, 15 May 2011 17:23:02 +0000 (17:23 +0000)]
kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.
SVN-Revision: 26905
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:35 +0000 (09:37 +0000)]
package/kernel: crypto: Remove renamed modules hack
Since the oldest kernel in trunk is 2.6.30 the modules always use the
newer names, so we can just use the _generic prefix directly.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26903
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:32 +0000 (09:37 +0000)]
package/kernel: netfilter: Remove 2.4/2.6 references
There's only 2.6, so it doesn't make sense to mention modules that are
2.4 only or for modules that they are available only for 2.6.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26902
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:28 +0000 (09:37 +0000)]
package/kernel: Remove all 2.4 definitions
With no 2.4 support in trunk, we can safely remove any 2.4 definitions for
kmods and merge the 2.6 definitions into the generic ones.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26901
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:24 +0000 (09:37 +0000)]
package/kernel: Remove $(KMOD_SUFFIX) usage
Since there's only 2.6 in trunk $(KMOD_SUFFIX) can be safely replaced with
ko for all mainline kernel modules.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26900
Matteo Croce [Sat, 14 May 2011 23:31:50 +0000 (23:31 +0000)]
ar71xx: add link detection on Ubiquiti devices WAN port
SVN-Revision: 26891
Matteo Croce [Sat, 14 May 2011 23:10:06 +0000 (23:10 +0000)]
use correct macros and frame size in ag71xx
SVN-Revision: 26890
Matteo Croce [Sat, 14 May 2011 23:08:00 +0000 (23:08 +0000)]
ar71xx: cosmetic fixes
SVN-Revision: 26889
Hamish Guthrie [Fri, 13 May 2011 11:52:40 +0000 (11:52 +0000)]
Correct libc path
SVN-Revision: 26885
Hamish Guthrie [Fri, 13 May 2011 11:49:52 +0000 (11:49 +0000)]
Add new defconfig and profile for es variant
SVN-Revision: 26884
Hamish Guthrie [Fri, 13 May 2011 10:36:39 +0000 (10:36 +0000)]
Squash uids
SVN-Revision: 26883
Daniel Dickinson [Fri, 13 May 2011 07:23:11 +0000 (07:23 +0000)]
Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.
SVN-Revision: 26882
Daniel Dickinson [Fri, 13 May 2011 06:08:49 +0000 (06:08 +0000)]
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26880
Daniel Dickinson [Fri, 13 May 2011 06:06:42 +0000 (06:06 +0000)]
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26879
Florian Fainelli [Wed, 11 May 2011 13:34:14 +0000 (13:34 +0000)]
bcm63xx: Add support for the T-Home Speedport W 303V
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
Florian Fainelli [Wed, 11 May 2011 13:34:05 +0000 (13:34 +0000)]
bcm63xx: Add firmware helpers for T-Home Speedport W 303V
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26877
Florian Fainelli [Wed, 11 May 2011 13:33:50 +0000 (13:33 +0000)]
bcm63xx: Update support for the DSL-274xB revision C
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
Florian Fainelli [Wed, 11 May 2011 13:33:45 +0000 (13:33 +0000)]
bcm63xx: Accept any led with power in its name as power led
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
Florian Fainelli [Wed, 11 May 2011 13:33:41 +0000 (13:33 +0000)]
bcm63xx: Decouple Board ID and image name for fixup
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
Florian Fainelli [Wed, 11 May 2011 13:33:34 +0000 (13:33 +0000)]
switch to 2.6.38
SVN-Revision: 26873
Florian Fainelli [Wed, 11 May 2011 13:33:30 +0000 (13:33 +0000)]
add missing 2.6.38 touchscreen config symbols
SVN-Revision: 26872
John Crispin [Mon, 9 May 2011 20:28:04 +0000 (20:28 +0000)]
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26868
John Crispin [Mon, 9 May 2011 15:21:58 +0000 (15:21 +0000)]
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
SVN-Revision: 26865
Gabor Juhos [Sun, 8 May 2011 21:38:51 +0000 (21:38 +0000)]
ar71xx: populate LED3 on the JA76PF board
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
SVN-Revision: 26862
Gabor Juhos [Sun, 8 May 2011 21:38:49 +0000 (21:38 +0000)]
ar71xx: add uci config for the WLAN LED on the WRT160NL
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
SVN-Revision: 26861
Gabor Juhos [Sun, 8 May 2011 21:38:48 +0000 (21:38 +0000)]
ar71xx: use phy0tpt trigger for the WLAN LEDs
SVN-Revision: 26860
Gabor Juhos [Sun, 8 May 2011 21:38:46 +0000 (21:38 +0000)]
ar71xx: remove superfluous fifo_cfg overrides
SVN-Revision: 26859
Travis Kemen [Sun, 8 May 2011 17:08:06 +0000 (17:08 +0000)]
ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht
SVN-Revision: 26858
Travis Kemen [Sun, 8 May 2011 17:03:07 +0000 (17:03 +0000)]
Deployment of IPv6 has opened up many more prefixes than just the 2000::/3 space, so a default route of ::/0 is more correct. Thanks Dave Taht
SVN-Revision: 26857
Gabor Juhos [Sun, 8 May 2011 16:32:53 +0000 (16:32 +0000)]
ar71xx: ag71xx: make switch register access atomic
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.
This is easily noticable during an iperf session:
...
[ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec
[ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec
...
[ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec
[ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec
[ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec
SVN-Revision: 26856
Gabor Juhos [Sun, 8 May 2011 13:30:36 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix section mismatch warnings
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.
The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.
SVN-Revision: 26855
Gabor Juhos [Sun, 8 May 2011 13:30:26 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix build error if debugfs is enabled
SVN-Revision: 26854
Jo-Philipp Wich [Sun, 8 May 2011 10:25:58 +0000 (10:25 +0000)]
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
SVN-Revision: 26848
Hauke Mehrtens [Sat, 7 May 2011 12:49:17 +0000 (12:49 +0000)]
brcm47xx: update patches
SVN-Revision: 26846
Gabor Juhos [Sat, 7 May 2011 12:40:34 +0000 (12:40 +0000)]
ar71xx: ag71xx: add debugfs entry for [rt]x_ring
SVN-Revision: 26845
Gabor Juhos [Sat, 7 May 2011 12:40:28 +0000 (12:40 +0000)]
ar71xx: ag71xx: add timestamps to ag71xx_buf
SVN-Revision: 26844
Gabor Juhos [Sat, 7 May 2011 12:40:26 +0000 (12:40 +0000)]
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
SVN-Revision: 26843
Gabor Juhos [Sat, 7 May 2011 12:40:25 +0000 (12:40 +0000)]
ar71xx: ag71xx: use debugfs_remove_recursive
SVN-Revision: 26842
Gabor Juhos [Sat, 7 May 2011 09:23:33 +0000 (09:23 +0000)]
base-files: fix a typo in etc/banner
SVN-Revision: 26841
Gabor Juhos [Sat, 7 May 2011 09:23:32 +0000 (09:23 +0000)]
ar71xx: override wmac device name for the AR934x SoCs
SVN-Revision: 26840
Florian Fainelli [Fri, 6 May 2011 12:37:40 +0000 (12:37 +0000)]
remove useless patches
SVN-Revision: 26837
Florian Fainelli [Fri, 6 May 2011 12:37:36 +0000 (12:37 +0000)]
fill maintainer infos for a couple of targets
SVN-Revision: 26836
Florian Fainelli [Thu, 5 May 2011 16:35:44 +0000 (16:35 +0000)]
update to 2.6.38.2
SVN-Revision: 26833
Florian Fainelli [Thu, 5 May 2011 16:35:40 +0000 (16:35 +0000)]
add missing 2.6.38 symbols
SVN-Revision: 26832
Hauke Mehrtens [Thu, 5 May 2011 14:05:21 +0000 (14:05 +0000)]
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
SVN-Revision: 26829
Hauke Mehrtens [Thu, 5 May 2011 13:18:35 +0000 (13:18 +0000)]
brcm47xx: fix typo in patch
SVN-Revision: 26828
Alexandros C. Couloumbis [Thu, 5 May 2011 07:19:46 +0000 (07:19 +0000)]
linux/ar71xx: add some missing symbols for nand/yaffs targets
SVN-Revision: 26827
Jo-Philipp Wich [Wed, 4 May 2011 14:51:06 +0000 (14:51 +0000)]
lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
SVN-Revision: 26822
Felix Fietkau [Wed, 4 May 2011 14:35:35 +0000 (14:35 +0000)]
ath9k: add noise floor calibration fix that should improve stability
SVN-Revision: 26819
Alexandros C. Couloumbis [Wed, 4 May 2011 09:35:06 +0000 (09:35 +0000)]
linux/generic: port yaffs to 2.6.39
SVN-Revision: 26818
Alexandros C. Couloumbis [Wed, 4 May 2011 08:47:00 +0000 (08:47 +0000)]
linux/rb532: use kernel and initramfs tags on image generation
SVN-Revision: 26817
Jo-Philipp Wich [Wed, 4 May 2011 08:19:07 +0000 (08:19 +0000)]
comgt: add tty hotplug remove handling, only iterate each tty once (#9211)
SVN-Revision: 26816
Jo-Philipp Wich [Tue, 3 May 2011 21:25:36 +0000 (21:25 +0000)]
kernel: revert r26814
SVN-Revision: 26815
Jo-Philipp Wich [Tue, 3 May 2011 21:22:43 +0000 (21:22 +0000)]
kernel: add kmod-crypto-ipsec kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto modules that are useful for IPSEC. This is an alternative to breaking these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng (rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26814
Jo-Philipp Wich [Tue, 3 May 2011 21:21:05 +0000 (21:21 +0000)]
kernel: add kmod-crypto-{wq,rng,iv} Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the extraneous kmod-crypto-core dependency to eliminate recursion.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26813
Jo-Philipp Wich [Tue, 3 May 2011 21:19:56 +0000 (21:19 +0000)]
kernel: add kmod-crypto-{wq,rng,iv} This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv packages. These packages provide some missing kernel crypto modules which are required for IPSEC. The strongswan4, ipsec-tools, and possibly other IPSEC packages do not work properly without these modules.
NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26812
Jo-Philipp Wich [Tue, 3 May 2011 21:18:12 +0000 (21:18 +0000)]
geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform.
SVN-Revision: 26811
Jo-Philipp Wich [Tue, 3 May 2011 19:45:55 +0000 (19:45 +0000)]
comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
SVN-Revision: 26810
Jo-Philipp Wich [Tue, 3 May 2011 19:39:13 +0000 (19:39 +0000)]
comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug (#9211)
SVN-Revision: 26809
Jo-Philipp Wich [Tue, 3 May 2011 19:37:59 +0000 (19:37 +0000)]
base-files: cleanup permissions of device files in common hotplug rules (#9211)
SVN-Revision: 26808
Jo-Philipp Wich [Tue, 3 May 2011 19:35:58 +0000 (19:35 +0000)]
hotplug2: introduce tty subsystem events (#9211)
SVN-Revision: 26807
Jo-Philipp Wich [Mon, 2 May 2011 12:55:36 +0000 (12:55 +0000)]
firewall: revert accidential committed changes from r26805
SVN-Revision: 26806
Jo-Philipp Wich [Mon, 2 May 2011 12:54:31 +0000 (12:54 +0000)]
firewall: provide examples of ssh port relocation on firewall and IPsec passthrough Two examples of potentially useful configurations (commented out, of course):
(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.
(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26805
projects / openwrt / staging / ldir.git / log