Rafał Miłecki [Thu, 2 Apr 2015 12:02:56 +0000 (12:02 +0000)]
bcm53xx: sprom: sync with mainline driver
The main difference now is bcm53xx registering it as platform (DT)
driver.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45230
Rafał Miłecki [Thu, 2 Apr 2015 12:01:56 +0000 (12:01 +0000)]
bcm53xx: sprom: simplify reading NVRAM after last backports
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45229
John Crispin [Wed, 1 Apr 2015 22:57:54 +0000 (22:57 +0000)]
ipq806x: add missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45228
Rafał Miłecki [Wed, 1 Apr 2015 20:23:37 +0000 (20:23 +0000)]
brcm47xx: backport two MIPS nvram.c patches
Also replace SPROM patch with (the same) mainlined version.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45227
John Crispin [Wed, 1 Apr 2015 16:12:43 +0000 (16:12 +0000)]
samba: use INSTALL_CONF for the uci file
sorry about the broken commit earlier
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45226
Nicolas Thill [Wed, 1 Apr 2015 15:59:14 +0000 (15:59 +0000)]
samba36: fix typo in package/samba36-server/install
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45225
Nicolas Thill [Wed, 1 Apr 2015 15:11:38 +0000 (15:11 +0000)]
ustream-ssl: fix SNI when building against cyassl
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45224
Nicolas Thill [Wed, 1 Apr 2015 15:11:32 +0000 (15:11 +0000)]
libreadline: cleanup Makefile, fix shlib perms
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45223
John Crispin [Wed, 1 Apr 2015 13:56:03 +0000 (13:56 +0000)]
kernel: remove kernel version dependency from ochi-pci module
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45222
John Crispin [Wed, 1 Apr 2015 13:52:31 +0000 (13:52 +0000)]
kernel: add usb-ohci-pci module
This add usb-ohci-pci module for USB1.x devices
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
SVN-Revision: 45221
John Crispin [Wed, 1 Apr 2015 13:39:23 +0000 (13:39 +0000)]
samba: don't overwrite config file
fixes #19087
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45220
John Crispin [Wed, 1 Apr 2015 13:36:58 +0000 (13:36 +0000)]
usbmode: update data files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45219
John Crispin [Wed, 1 Apr 2015 13:06:14 +0000 (13:06 +0000)]
kernel: add missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45218
John Crispin [Wed, 1 Apr 2015 13:00:45 +0000 (13:00 +0000)]
cyassl: add --enable-ecc as its needed when using the CA certificates
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45217
John Crispin [Wed, 1 Apr 2015 10:42:33 +0000 (10:42 +0000)]
ustream-ssl: enable SNI when building for cyassl
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45216
John Crispin [Wed, 1 Apr 2015 10:42:28 +0000 (10:42 +0000)]
cyassl: add support for SSL_set_tlsext_host_name
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45215
John Crispin [Wed, 1 Apr 2015 09:03:13 +0000 (09:03 +0000)]
ixp4xx: fix beeper module dependencies
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45214
John Crispin [Wed, 1 Apr 2015 08:33:10 +0000 (08:33 +0000)]
dnsmasq: backport --tftp-no-fail to ignore missing tftp root
This patch backports the option --tftp-no-fail to dnsmasq and prevents the
service from aborting if the specified TFTP root directory is not available;
this might be the case if TFTP files are located on external media that might
occasionally not be present at startup.
Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>
SVN-Revision: 45213
John Crispin [Wed, 1 Apr 2015 08:33:04 +0000 (08:33 +0000)]
config: add an option to enable KPROBE
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45212
John Crispin [Wed, 1 Apr 2015 08:32:29 +0000 (08:32 +0000)]
ipq806x: clean up kernel conf
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45211
John Crispin [Wed, 1 Apr 2015 08:32:03 +0000 (08:32 +0000)]
ipq806x: add support for 4.0 kernel
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45210
John Crispin [Wed, 1 Apr 2015 08:31:52 +0000 (08:31 +0000)]
ipq806x: move 020-add-ap148-bootargs.patch in patches-3.18
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45209
John Crispin [Wed, 1 Apr 2015 08:31:46 +0000 (08:31 +0000)]
ramips: Add support for ZTE Q7
ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC.
I can,t find any information about this router on ZTE's website.
But I found this : http://en.cctairmobi.com/plus/list.php?tid=40
This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D
This patch adds support for it.
Because there is only one port,I disabled VLAN and use eth0 as lan port.
I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-(
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 45208
John Crispin [Wed, 1 Apr 2015 08:31:38 +0000 (08:31 +0000)]
nls.mk: fix typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 45207
John Crispin [Wed, 1 Apr 2015 08:31:33 +0000 (08:31 +0000)]
modules: package line echo canceller module
...so we can go ahead cleaning up dahdi-linux
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45206
John Crispin [Wed, 1 Apr 2015 08:31:26 +0000 (08:31 +0000)]
kernel: add missing symbols to config and modules
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: changes in input.mk broke the patch, some of the CONFIG_SND_*
stuff was added already
SVN-Revision: 45205
Rafał Miłecki [Wed, 1 Apr 2015 07:21:59 +0000 (07:21 +0000)]
bcm53xx: use bcm47xx_nvram.c with the latest patches
This will be hopefully a mainline version.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45204
Gabor Juhos [Tue, 31 Mar 2015 21:31:36 +0000 (21:31 +0000)]
ar71xx: fix platform device support in the gpio-74x164 driver
Platform device support has been removed from the gpio-74x164
driver in 3.14. Restore that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45203
Rafał Miłecki [Tue, 31 Mar 2015 21:16:19 +0000 (21:16 +0000)]
brcm47xx: image: share function checking TRX in provided firmware
This will allow us to calculate crc32 in a shared code.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45202
Imre Kaloz [Tue, 31 Mar 2015 19:28:39 +0000 (19:28 +0000)]
mwlwifi: upgrade to today's snapshot
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45201
Imre Kaloz [Tue, 31 Mar 2015 19:27:59 +0000 (19:27 +0000)]
mvebu: use CONFIG_MANGLE_BOOTARGS
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45200
Imre Kaloz [Tue, 31 Mar 2015 19:23:32 +0000 (19:23 +0000)]
mvebu: add missing a38x dts labels
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45199
Imre Kaloz [Tue, 31 Mar 2015 19:22:28 +0000 (19:22 +0000)]
generic/4.0: upgrade to 4.0-rc6
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45198
Imre Kaloz [Tue, 31 Mar 2015 19:21:13 +0000 (19:21 +0000)]
generic/3.18: upgrade to 3.18.10
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45197
Imre Kaloz [Tue, 31 Mar 2015 19:18:03 +0000 (19:18 +0000)]
generic: add CONFIG_MANGLE_BOOTARGS and disable it by default
Enabling this option renames the bootloader supplied root=
and rootfstype= variables, which might have to be know but
would break the automatisms OpenWrt uses.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45196
Imre Kaloz [Tue, 31 Mar 2015 19:12:27 +0000 (19:12 +0000)]
mvebu: deal with the new path in the fan control script for Linux 4.0+
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45195
Felix Fietkau [Tue, 31 Mar 2015 18:31:08 +0000 (18:31 +0000)]
package-ipkg.mk: fix typo
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45194
Felix Fietkau [Tue, 31 Mar 2015 18:29:30 +0000 (18:29 +0000)]
package-ipkg.mk: add missing semicolon (#19381)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45193
Steven Barth [Tue, 31 Mar 2015 17:30:56 +0000 (17:30 +0000)]
odhcpd: compile fixes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45192
Steven Barth [Tue, 31 Mar 2015 17:30:47 +0000 (17:30 +0000)]
odhcp6c: some more code compliance
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45191
Felix Fietkau [Tue, 31 Mar 2015 16:52:03 +0000 (16:52 +0000)]
build: make device image kernels depend on Image/Prepare step
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45190
Felix Fietkau [Tue, 31 Mar 2015 16:44:32 +0000 (16:44 +0000)]
uci: update to the latest version, fixes delta path / savedir issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45189
Gabor Juhos [Tue, 31 Mar 2015 15:31:57 +0000 (15:31 +0000)]
kernel: update yaffs code to the latest version
Use the latest version of the yaffs code. Fetched from the
yaffs2 git tree and it is based on the following commit:
commit
7e5cf0fa1b694f835cdc184a8395b229fa29f9ae
Author: Charles Manning <cdhmanning@gmail.com>
Date: Thu Aug 7 11:25:05 2014 +1200
yaffs-direct: Basic tests. Add lpthread flag for background gc support
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45188
Felix Fietkau [Tue, 31 Mar 2015 15:13:27 +0000 (15:13 +0000)]
build: ensure that preinst and postrm are executable (fixes #19372)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45187
Zoltan Herpai [Tue, 31 Mar 2015 13:23:46 +0000 (13:23 +0000)]
kernel: add a couple missing symbols for 4.0
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45186
Steven Barth [Tue, 31 Mar 2015 13:14:40 +0000 (13:14 +0000)]
netifd: revert policy routing (broke some custom user rules)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45185
Rafał Miłecki [Tue, 31 Mar 2015 12:44:31 +0000 (12:44 +0000)]
brcm47xx: image: convert legacy Linksys & Netgear devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45184
Rafał Miłecki [Tue, 31 Mar 2015 12:17:08 +0000 (12:17 +0000)]
brcm47xx: image: convert generic subtarget to the new images system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45183
Steven Barth [Tue, 31 Mar 2015 11:36:20 +0000 (11:36 +0000)]
netifd: add metric argument for ipv4 proto routes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45182
Rafał Miłecki [Tue, 31 Mar 2015 11:26:50 +0000 (11:26 +0000)]
brcm47xx: image: convert all mips74k images to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45181
Rafał Miłecki [Tue, 31 Mar 2015 11:26:45 +0000 (11:26 +0000)]
brcm47xx: image: add helpers for defining devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45180
Jonas Gorski [Tue, 31 Mar 2015 09:54:15 +0000 (09:54 +0000)]
brcm63xx: fix zyxel kernel name
Accidentally left over development artifact.
Reported-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45179
Rafał Miłecki [Tue, 31 Mar 2015 08:56:08 +0000 (08:56 +0000)]
brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings
KERNEL_IMAGE is used as target rule so reusing the same name causes:
Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Unfortunately this will cause copying vmlinux.lzma over and over like:
cp vmlinux.lzma FOO-kernel.bin
which is redundant on brcm47xx where we never modify kernel image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45178
Gabor Juhos [Tue, 31 Mar 2015 08:30:56 +0000 (08:30 +0000)]
ar71xx/mikrotik: disable atnoher two non MikroTik boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45177
Gabor Juhos [Tue, 31 Mar 2015 07:56:25 +0000 (07:56 +0000)]
ar71xx/mikrotik: disable non MikroTik boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45176
Gabor Juhos [Tue, 31 Mar 2015 07:56:22 +0000 (07:56 +0000)]
ar71xx/mikrotik: use correct symbol to disable overlayfs
The Kconfig symbol has been changed in 3.18.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45175
Rafał Miłecki [Tue, 31 Mar 2015 07:26:30 +0000 (07:26 +0000)]
brcm47xx: fix checking cross-vendors firmware images
This change won't allow installing e.g. Netgear firmware on Linksys
device.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45174
Rafał Miłecki [Tue, 31 Mar 2015 07:26:22 +0000 (07:26 +0000)]
brcm47xx: update Linksys firmwares (add new E2500 versions)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45173
Rafał Miłecki [Tue, 31 Mar 2015 06:05:35 +0000 (06:05 +0000)]
brcm47xx: display all errors (not just the 1st one) when checking image
This way people forcing upgrade will know what may go wrong.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45172
Rafał Miłecki [Tue, 31 Mar 2015 05:39:33 +0000 (05:39 +0000)]
brcm47xx: recognize more device specific firmwares
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45171
Rafał Miłecki [Mon, 30 Mar 2015 22:06:11 +0000 (22:06 +0000)]
brcm47xx: compare provided firmware magic with device magic
This makes sysupgrade reject firmware images for different devices.
Right now only support for 2 sample devices is implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45170
Jonas Gorski [Mon, 30 Mar 2015 20:21:24 +0000 (20:21 +0000)]
brcm63xx: don't build non-dtb kernels anymore
Now that all supported boards have an dts there is no need for a
dtb free kernel anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45169
Jonas Gorski [Mon, 30 Mar 2015 20:21:15 +0000 (20:21 +0000)]
brcm63xx: move DSL-275XB to DT
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45168
Jonas Gorski [Mon, 30 Mar 2015 20:21:07 +0000 (20:21 +0000)]
brcm63xx: move bcm6318 reference boards to DT
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45167
Jonas Gorski [Mon, 30 Mar 2015 20:21:01 +0000 (20:21 +0000)]
brcm63xx: move VG50 to DT
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45166
Jonas Gorski [Mon, 30 Mar 2015 20:20:49 +0000 (20:20 +0000)]
brcm63xx: move V2110 to DT
Also readd image generation which was accidentally dropped in r43364.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45165
Jonas Gorski [Mon, 30 Mar 2015 20:20:15 +0000 (20:20 +0000)]
brcm63xx: use relocate to move the kernel back to start of ram
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327).
Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45164
Jonas Gorski [Mon, 30 Mar 2015 20:20:10 +0000 (20:20 +0000)]
generic: relocate: make the cacheline size configurable
Different targets have different cache line sizes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45163
Jonas Gorski [Mon, 30 Mar 2015 20:20:08 +0000 (20:20 +0000)]
ramips: move relocating loader to common location
Allow other targets to use it, too.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45162
Gabor Juhos [Mon, 30 Mar 2015 19:57:52 +0000 (19:57 +0000)]
ar71xx/mikrotik: re-enable 4KiB flash sector erase
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45161
Gabor Juhos [Mon, 30 Mar 2015 18:12:54 +0000 (18:12 +0000)]
ar71xx: re-enable AR8216_PHY_LEDS
The setting has been lost during the transition to 3.18.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45160
Gabor Juhos [Mon, 30 Mar 2015 18:12:50 +0000 (18:12 +0000)]
ar71xx: sync kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45159
Steven Barth [Mon, 30 Mar 2015 17:04:14 +0000 (17:04 +0000)]
nftables: bump to 2015-03-24
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45158
John Crispin [Mon, 30 Mar 2015 13:17:27 +0000 (13:17 +0000)]
ustream-ssl: properly handle return codes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45157
Felix Fietkau [Mon, 30 Mar 2015 13:03:58 +0000 (13:03 +0000)]
image.mk: fix initramfs kernel build instructions leaking across device sections
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45156
John Crispin [Mon, 30 Mar 2015 12:47:51 +0000 (12:47 +0000)]
xburst: add missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45155
John Crispin [Mon, 30 Mar 2015 12:45:01 +0000 (12:45 +0000)]
modules: more xen modules have been moved
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45154
John Crispin [Mon, 30 Mar 2015 12:35:13 +0000 (12:35 +0000)]
uhttpd: properly handle return codes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45153
John Crispin [Mon, 30 Mar 2015 12:35:05 +0000 (12:35 +0000)]
rpcd: properly handle return codes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45152
John Crispin [Mon, 30 Mar 2015 12:34:56 +0000 (12:34 +0000)]
ubox: properly handle return codes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45151
John Crispin [Mon, 30 Mar 2015 12:34:42 +0000 (12:34 +0000)]
procd: properly handle return codes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45150
John Crispin [Mon, 30 Mar 2015 12:33:05 +0000 (12:33 +0000)]
fstools: properly handle return codes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45149
Steven Barth [Mon, 30 Mar 2015 08:53:22 +0000 (08:53 +0000)]
odhcpd: fix default dhcpv6 behavior for non-/64
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45148
Steven Barth [Mon, 30 Mar 2015 08:49:47 +0000 (08:49 +0000)]
odhcpd: fix musl build, change default DHCPv6 behavior
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45147
Steven Barth [Mon, 30 Mar 2015 08:49:20 +0000 (08:49 +0000)]
odhcp6c: musl fixes (thanks Felix)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45146
Steven Barth [Mon, 30 Mar 2015 08:48:51 +0000 (08:48 +0000)]
kernel/generic: (try) fixing MAP-E patch broken in 4.0
Now it at least compiles, otherwise untested.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45145
Rafał Miłecki [Sun, 29 Mar 2015 19:53:11 +0000 (19:53 +0000)]
brcm47xx: convert Netgear WNDR3700 V3 to the new image building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45144
Rafał Miłecki [Sun, 29 Mar 2015 18:15:38 +0000 (18:15 +0000)]
brcm47xx: convert Linksys E1200 V2 to the new image building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45143
John Crispin [Sun, 29 Mar 2015 16:11:28 +0000 (16:11 +0000)]
modules: xen-fbfront.ko has moved
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45142
John Crispin [Sun, 29 Mar 2015 15:38:21 +0000 (15:38 +0000)]
ubox: update to latest git HEAD
the return code of a pipe() was not checked properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45141
John Crispin [Sun, 29 Mar 2015 12:58:01 +0000 (12:58 +0000)]
ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
the ID starts with
29763654+16+64 instead of
29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
after the zero (which wasn't always visible using busybox tools, but could
confuse other scripts)
Tested on a WNDR3700v1 and a WNDR3700v2 using the new
29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.
The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.
The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.
Fixes #18992.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45140
John Crispin [Sun, 29 Mar 2015 12:57:32 +0000 (12:57 +0000)]
ubox: update to latest git HEAD
fixes log levels
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45139
Imre Kaloz [Sun, 29 Mar 2015 12:17:39 +0000 (12:17 +0000)]
x86_64: add description, maintainership
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45138
Felix Fietkau [Sun, 29 Mar 2015 10:43:07 +0000 (10:43 +0000)]
uclibc: backport an upstream i386 syscall fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45137
Felix Fietkau [Sun, 29 Mar 2015 08:12:50 +0000 (08:12 +0000)]
kernel: remove useless AddDepends/rtc abstraction
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45136
Felix Fietkau [Sun, 29 Mar 2015 08:12:39 +0000 (08:12 +0000)]
kernel: remove useless AddDepends/input abstraction
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45135
Felix Fietkau [Sun, 29 Mar 2015 08:12:31 +0000 (08:12 +0000)]
kernel: remove useless AddDepends/hid abstraction
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45134
Felix Fietkau [Sun, 29 Mar 2015 08:12:23 +0000 (08:12 +0000)]
kernel: remove useless AddDepends/crc16 abstraction
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45133
Felix Fietkau [Sun, 29 Mar 2015 07:36:17 +0000 (07:36 +0000)]
arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45132
Felix Fietkau [Sun, 29 Mar 2015 07:35:42 +0000 (07:35 +0000)]
kernel: only run kernel module list through version filter where version specific items are present - cuts package/kernel/linux/compile time in half
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45131
projects / openwrt / staging / ansuel.git / log