git.openwrt.org Git - openwrt/staging/blogic.git/log

net: phy: Avoid multiple suspends

It is currently possible for a PHY device to be suspended as part of a
network device driver's suspend call while it is still being attached to
that net_device, either via phy_suspend() or implicitly via phy_stop().

Later on, when the MDIO bus controller get suspended, we would attempt
to suspend again the PHY because it is still attached to a network
device.

This is both a waste of time and creates an opportunity for improper
clock/power management bugs to creep in.

Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851-ml: Fix IRQ handling and locking

The KS8851 requires that packet RX and TX are mutually exclusive.
Currently, the driver hopes to achieve this by disabling interrupt
from the card by writing the card registers and by disabling the
interrupt on the interrupt controller. This however is racy on SMP.

Replace this approach by expanding the spinlock used around the
ks_start_xmit() TX path to ks_irq() RX path to assure true mutual
exclusion and remove the interrupt enabling/disabling, which is
now not needed anymore. Furthermore, disable interrupts also in
ks_net_stop(), which was missing before.

Note that a massive improvement here would be to re-use the KS8851
driver approach, which is to move the TX path into a worker thread,
interrupt handling to threaded interrupt, and synchronize everything
with mutexes, but that would be a much bigger rework, for a separate
patch.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: networking: phy: Rephrase paragraph for clarity

Let's make it a little easier to read.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix TFO SYNACK undo to avoid double-timestamp-undo

In a rare corner case the new logic for undo of SYNACK RTO could
result in triggering the warning in tcp_fastretrans_alert() that says:
        WARN_ON(tp->retrans_out != 0);

The warning looked like:

WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270

The sequence that tickles this bug is:
- Fast Open server receives TFO SYN with data, sends SYNACK
- (client receives SYNACK and sends ACK, but ACK is lost)
- server app sends some data packets
- (N of the first data packets are lost)
- server receives client ACK that has a TS ECR matching first SYNACK,
   and also SACKs suggesting the first N data packets were lost
    - server performs TS undo of SYNACK RTO, then immediately
      enters recovery
    - buggy behavior then performed a *second* undo that caused
      the connection to be in CA_Open with retrans_out != 0

Basically, the incoming ACK packet with SACK blocks causes us to first
undo the cwnd reduction from the SYNACK RTO, but then immediately
enters fast recovery, which then makes us eligible for undo again. And
then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo
using a "mash-up" of state from two different loss recovery phases: it
uses the timestamp info from the ACK of the original SYNACK, and the
undo_marker from the fast recovery.

This fix refines the logic to only invoke the tcp_try_undo_loss()
inside tcp_rcv_synrecv_state_fastopen() if the connection is still in
CA_Loss.  If peer SACKs triggered fast recovery, then
tcp_rcv_synrecv_state_fastopen() can't safely undo.

Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Fix unwanted wakeup in netvsc_attach()

When netvsc_attach() is called by operations like changing MTU, etc.,
an extra wakeup may happen while netvsc_attach() calling
rndis_filter_device_add() which sends rndis messages when queue is
stopped in netvsc_detach(). The completion message will wake up queue 0.

We can reproduce the issue by changing MTU etc., then the wake_queue
counter from "ethtool -S" will increase beyond stop_queue counter:
stop_queue: 0
wake_queue: 1
The issue causes queue wake up, and counter increment, no other ill
effects in current code. So we didn't see any network problem for now.

To fix this, initialize tx_disable to true, and set it to false when
the NIC is ready to be attached or registered.

Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: qmi_wwan: restore mtu min/max values after raw_ip switch

usbnet creates network interfaces with min_mtu = 0 and
max_mtu = ETH_MAX_MTU.

These values are not modified by qmi_wwan when the network interface
is created initially, allowing, for example, to set mtu greater than 1500.

When a raw_ip switch is done (raw_ip set to 'Y', then set to 'N') the mtu
values for the network interface are set through ether_setup, with
min_mtu = ETH_MIN_MTU and max_mtu = ETH_DATA_LEN, not allowing anymore to
set mtu greater than 1500 (error: mtu greater than device maximum).

The patch restores the original min/max mtu values set by usbnet after a
raw_ip switch.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: genetlink: return the error code when attribute parsing fails.

Currently if attribute parsing fails and the genl family
does not support parallel operation, the error code returned
by __nlmsg_parse() is discarded by genl_family_rcv_msg_attrs_parse().

Be sure to report the error for all genl families.

Fixes: c10e6cf85e7d ("net: genetlink: push attrbuf allocation and parsing to a separate function")
Fixes: ab5b526da048 ("net: genetlink: always allocate separate attrs for dumpit ops")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: ensure rcu_read_lock() in cipso_v4_error()

Similarly to commit c543cb4a5f07 ("ipv4: ensure rcu_read_lock() in
ipv4_link_failure()"), __ip_options_compile() must be called under rcu
protection.

Fixes: 3da1ed7ac398 ("net: avoid use IPCB in cipso_v4_error")
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost: Check docket sk_family instead of call getname

Doing so, we save one call to get data we already have in the struct.

Also, since there is no guarantee that getname use sockaddr_ll
parameter beyond its size, we add a little bit of security here.
It should do not do beyond MAX_ADDR_LEN, but syzbot found that
ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25,
versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro).

Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-watchdog-5.6-rc3' of git://linux-watchdog.org/linux-watchdog

Pull watchdog fixes from Wim Van Sebroeck:

- mtk_wdt needs RESET_CONTROLLER to build

- da9062 driver fixes:
     - fix power management ops
     - do not ping the hw during stop()
     - add dependency on I2C

* tag 'linux-watchdog-5.6-rc3' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: da9062: Add dependency on I2C
  watchdog: da9062: fix power management ops
  watchdog: da9062: do not ping the hw during stop()
  watchdog: fix mtk_wdt.c RESET_CONTROLLER build error

Merge tag 'char-misc-5.6-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.6-rc3.

  Also included in here are some updates for some documentation files
  that I seem to be maintaining these days.

  The driver fixes are:
   - small fixes for the habanalabs driver
   - fsi driver bugfix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/process: Swap out the ambassador for Canonical
  habanalabs: patched cb equals user cb in device memset
  habanalabs: do not halt CoreSight during hard reset
  habanalabs: halt the engines before hard-reset
  MAINTAINERS: remove unnecessary ':' characters
  fsi: aspeed: add unspecified HAS_IOMEM dependency
  COPYING: state that all contributions really are covered by this file
  Documentation/process: Change Microsoft contact for embargoed hardware issues
  embargoed-hardware-issues: drop Amazon contact as the email address now bounces
  Documentation/process: Add Arm contact for embargoed HW issues

Merge tag 'staging-5.6-rc3' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.6-rc3, along with the
  removal of an unused/unneeded driver as well.

  The android vsoc driver is not needed anymore by anyone, so it was
  removed.

  The other driver fixes are:
   - ashmem bugfixes
   - greybus audio driver bugfix
   - wireless driver bugfixes and tiny cleanups to error paths

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'staging-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723bs: Remove unneeded goto statements
  staging: rtl8188eu: Remove some unneeded goto statements
  staging: rtl8723bs: Fix potential overuse of kernel memory
  staging: rtl8188eu: Fix potential overuse of kernel memory
  staging: rtl8723bs: Fix potential security hole
  staging: rtl8188eu: Fix potential security hole
  staging: greybus: use after free in gb_audio_manager_remove_all()
  staging: android: Delete the 'vsoc' driver
  staging: rtl8723bs: fix copy of overlapping memory
  staging: android: ashmem: Disallow ashmem memory from being remapped
  staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi.

Merge tag 'tty-5.6-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 5.6-rc3
  that resolve a bunch of reported issues.

  They are:
   - vt selection and ioctl fixes
   - serdev bugfix
   - atmel serial driver fixes
   - qcom serial driver fixes
   - other minor serial driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: selection, close sel_buffer race
  vt: selection, handle pending signals in paste_selection
  serial: cpm_uart: call cpm_muram_init before registering console
  tty: serial: qcom_geni_serial: Fix RX cancel command failure
  serial: 8250: Check UPF_IRQ_SHARED in advance
  tty: serial: imx: setup the correct sg entry for tx dma
  vt: vt_ioctl: fix race in VT_RESIZEX
  vt: fix scrollback flushing on background consoles
  tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
  tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
  serdev: ttyport: restore client ops on deregistration
  serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE

Merge tag 'usb-5.6-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.6-rc3.

  Included in here are:
  - MAINTAINER file updates
  - USB gadget driver fixes
  - usb core quirk additions and fixes for regressions
  - xhci driver fixes
  - usb serial driver id additions and fixes
  - thunderbolt bugfix

  Thunderbolt patches come in through here now that USB4 is really
  thunderbolt.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits)
  USB: misc: iowarrior: add support for the 100 device
  thunderbolt: Prevent crash if non-active NVMem file is read
  usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc format
  USB: misc: iowarrior: add support for the 28 and 28L devices
  USB: misc: iowarrior: add support for 2 OEMed devices
  USB: Fix novation SourceControl XL after suspend
  xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2
  Revert "xhci: Fix memory leak when caching protocol extended capability PSI tables"
  MAINTAINERS: Sort entries in database for THUNDERBOLT
  usb: dwc3: debug: fix string position formatting mixup with ret and len
  usb: gadget: serial: fix Tx stall after buffer overflow
  usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
  usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows
  usb: dwc2: Fix in ISOC request length checking
  usb: gadget: composite: Support more than 500mA MaxPower
  usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus
  usb: gadget: u_audio: Fix high-speed max packet size
  usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
  USB: core: clean up endpoint-descriptor parsing
  USB: quirks: blacklist duplicate ep on Sound Devices USBPre2
  ...

Merge tag 'drm-fixes-2020-02-21' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Varied fixes for rc3.

  i915 is the largest, they are seeing some ACPI problems with their CI
  which hopefully get solved soon [1].

  msm has a bunch of fixes for new hw added in the merge, a bunch of
  amdgpu fixes, and nouveau adds support for some new firmwares for
  turing tu11x GPUs that were just released into linux-firmware by
  nvidia, they operate the same as the ones we already have for tu10x so
  should be fine to hook up.

  Otherwise it's just misc fixes for panfrost and sun4i.

  core:
   - Allow only one rotation argument, and allow zero rotation in video
     cmdline.

  i915:
   - Workaround missing Display Stream Compression (DSC) state readout
     by forcing modeset when its enabled at probe
   - Fix EHL port clock voltage level requirements
   - Fix queuing retire workers on the virtual engine
   - Fix use of partially initialized waiters
   - Stop using drm_pci_alloc/drm_pci/free
   - Fix rewind of RING_TAIL by forcing a context reload
   - Fix locking on resetting ring->head
   - Propagate our bug filing URL change to stable kernels

  panfrost:
   - Small compiler warning fix for panfrost.
   - Fix when using performance counters in panfrost when using per fd
     address space.

  sun4xi:
   - Fix dt binding

  nouveau:
   - tu11x modesetting fix
   - ACR/GR firmware support for tu11x (fw is public now)

  msm:
   - fix UBWC on GPU and display side for sc7180
   - fix DSI suspend/resume issue encountered on sc7180
   - fix some breakage on so called "linux-android" devices
      (fallout from sc7180/a618 support, not seen earlier due to
       bootloader/firmware differences)
   - couple other misc fixes

  amdgpu:
   - HDCP fixes
   - xclk fix for raven
   - GFXOFF fixes"

[1] The Intel suspend testing should now be fixed by commit 63fb9623427f
    ("ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()")

* tag 'drm-fixes-2020-02-21' of git://anongit.freedesktop.org/drm/drm: (39 commits)
  drm/amdgpu/display: clean up hdcp workqueue handling
  drm/amdgpu: add is_raven_kicker judgement for raven1
  drm/i915/gt: Avoid resetting ring->head outside of its timeline mutex
  drm/i915/execlists: Always force a context reload when rewinding RING_TAIL
  drm/i915: Wean off drm_pci_alloc/drm_pci_free
  drm/i915/gt: Protect defer_request() from new waiters
  drm/i915/gt: Prevent queuing retire workers on the virtual engine
  drm/i915/dsc: force full modeset whenever DSC is enabled at probe
  drm/i915/ehl: Update port clock voltage level requirements
  drm/i915: Update drm/i915 bug filing URL
  MAINTAINERS: Update drm/i915 bug filing URL
  drm/i915: Initialise basic fence before acquiring seqno
  drm/i915/gem: Require per-engine reset support for non-persistent contexts
  drm/nouveau/kms/gv100-: Re-set LUT after clearing for modesets
  drm/nouveau/gr/tu11x: initial support
  drm/nouveau/acr/tu11x: initial support
  drm/amdgpu/gfx10: disable gfxoff when reading rlc clock
  drm/amdgpu/gfx9: disable gfxoff when reading rlc clock
  drm/amdgpu/soc15: fix xclk for raven
  drm/amd/powerplay: always refetch the enabled features status on dpm enablement
  ...

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
    Cong Wang.

2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
    is finished, from Magnus Karlsson.

3) Set table field properly to RT_TABLE_COMPAT when necessary, from
    Jethro Beekman.

4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
    that in IFLA_ALT_IFNAME. From Eric Dumazet.

5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.

6) Handle mtu==0 devices properly in wireguard, from Jason A.
    Donenfeld.

7) Fix several lockdep warnings in bonding, from Taehee Yoo.

8) Fix cls_flower port blocking, from Jason Baron.

9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.

10) Fix RDMA race in qede driver, from Michal Kalderon.

11) Fix several false lockdep warnings by adding conditions to
    list_for_each_entry_rcu(), from Madhuparna Bhowmik.

12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.

13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.

14) Hey, variables declared in switch statement before any case
    statements are not initialized. I learn something every day. Get
    rids of this stuff in several parts of the networking, from Kees
    Cook.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
  bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
  bnxt_en: Improve device shutdown method.
  net: netlink: cap max groups which will be considered in netlink_bind()
  net: thunderx: workaround BGX TX Underflow issue
  ionic: fix fw_status read
  net: disable BRIDGE_NETFILTER by default
  net: macb: Properly handle phylink on at91rm9200
  s390/qeth: fix off-by-one in RX copybreak check
  s390/qeth: don't warn for napi with 0 budget
  s390/qeth: vnicc Fix EOPNOTSUPP precedence
  openvswitch: Distribute switch variables for initialization
  net: ip6_gre: Distribute switch variables for initialization
  net: core: Distribute switch variables for initialization
  udp: rehash on disconnect
  net/tls: Fix to avoid gettig invalid tls record
  bpf: Fix a potential deadlock with bpf_map_do_batch
  bpf: Do not grab the bucket spinlock by default on htab batch ops
  ice: Wait for VF to be reset/ready before configuration
  ice: Don't tell the OS that link is going down
  ice: Don't reject odd values of usecs set by user
  ...

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:

- A few y2038 fixes which missed the merge window while dependencies
   in NFS were being sorted out.

- A bunch of fixes. Some minor, some not.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: use tabs for SAFESETID
  lib/stackdepot.c: fix global out-of-bounds in stack_slabs
  mm/sparsemem: pfn_to_page is not valid yet on SPARSEMEM
  mm/vmscan.c: don't round up scan size for online memory cgroup
  lib/string.c: update match_string() doc-strings with correct behavior
  mm/memcontrol.c: lost css_put in memcg_expand_shrinker_maps()
  mm/swapfile.c: fix a comment in sys_swapon()
  scripts/get_maintainer.pl: deprioritize old Fixes: addresses
  get_maintainer: remove uses of P: for maintainer name
  selftests/vm: add missed tests in run_vmtests
  include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap
  Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"
  y2038: hide timeval/timespec/itimerval/itimerspec types
  y2038: remove unused time32 interfaces
  y2038: remove ktime to/from timespec/timeval conversion

MAINTAINERS: use tabs for SAFESETID

Use tabs for indentation instead of spaces for SAFESETID. All (!) other
entries in MAINTAINERS use tabs (according to my simple grepping).

Link: http://lkml.kernel.org/r/2bb2e52a-2694-816d-57b4-6cabfadd6c1a@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Micah Morton <mortonm@chromium.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/stackdepot.c: fix global out-of-bounds in stack_slabs

Walter Wu has reported a potential case in which init_stack_slab() is
called after stack_slabs[STACK_ALLOC_MAX_SLABS - 1] has already been
initialized. In that case init_stack_slab() will overwrite
stack_slabs[STACK_ALLOC_MAX_SLABS], which may result in a memory
corruption.

Link: http://lkml.kernel.org/r/20200218102950.260263-1-glider@google.com
Fixes: cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/sparsemem: pfn_to_page is not valid yet on SPARSEMEM

When we use SPARSEMEM instead of SPARSEMEM_VMEMMAP, pfn_to_page()
doesn't work before sparse_init_one_section() is called.

This leads to a crash when hotplug memory:

    BUG: unable to handle page fault for address: 0000000006400000
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    PGD 0 P4D 0
    Oops: 0002 [#1] SMP PTI
    CPU: 3 PID: 221 Comm: kworker/u16:1 Tainted: G        W         5.5.0-next-20200205+ #343
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
    Workqueue: kacpi_hotplug acpi_hotplug_work_fn
    RIP: 0010:__memset+0x24/0x30
    Code: cc cc cc cc cc cc 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 f3
    RSP: 0018:ffffb43ac0373c80 EFLAGS: 00010a87
    RAX: ffffffffffffffff RBX: ffff8a1518800000 RCX: 0000000000050000
    RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000006400000
    RBP: 0000000000140000 R08: 0000000000100000 R09: 0000000006400000
    R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000
    R13: 0000000000000028 R14: 0000000000000000 R15: ffff8a153ffd9280
    FS:  0000000000000000(0000) GS:ffff8a153ab00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000006400000 CR3: 0000000136fca000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     sparse_add_section+0x1c9/0x26a
     __add_pages+0xbf/0x150
     add_pages+0x12/0x60
     add_memory_resource+0xc8/0x210
     __add_memory+0x62/0xb0
     acpi_memory_device_add+0x13f/0x300
     acpi_bus_attach+0xf6/0x200
     acpi_bus_scan+0x43/0x90
     acpi_device_hotplug+0x275/0x3d0
     acpi_hotplug_work_fn+0x1a/0x30
     process_one_work+0x1a7/0x370
     worker_thread+0x30/0x380
     kthread+0x112/0x130
     ret_from_fork+0x35/0x40

We should use memmap as it did.

On x86 the impact is limited to x86_32 builds, or x86_64 configurations
that override the default setting for SPARSEMEM_VMEMMAP.

Other memory hotplug archs (arm64, ia64, and ppc) also default to
SPARSEMEM_VMEMMAP=y.

[dan.j.williams@intel.com: changelog update]
{rppt@linux.ibm.com: changelog update]
Link: http://lkml.kernel.org/r/20200219030454.4844-1-bhe@redhat.com
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan.c: don't round up scan size for online memory cgroup

Commit 68600f623d69 ("mm: don't miss the last page because of round-off
error") makes the scan size round up to @denominator regardless of the
memory cgroup's state, online or offline.  This affects the overall
reclaiming behavior: the corresponding LRU list is eligible for
reclaiming only when its size logically right shifted by @sc->priority
is bigger than zero in the former formula.

For example, the inactive anonymous LRU list should have at least 0x4000
pages to be eligible for reclaiming when we have 60/12 for
swappiness/priority and without taking scan/rotation ratio into account.

After the roundup is applied, the inactive anonymous LRU list becomes
eligible for reclaiming when its size is bigger than or equal to 0x1000
in the same condition.

    (0x4000 >> 12) * 60 / (60 + 140 + 1) = 1
    ((0x1000 >> 12) * 60) + 200) / (60 + 140 + 1) = 1

aarch64 has 512MB huge page size when the base page size is 64KB.  The
memory cgroup that has a huge page is always eligible for reclaiming in
that case.

The reclaiming is likely to stop after the huge page is reclaimed,
meaing the further iteration on @sc->priority and the silbing and child
memory cgroups will be skipped.  The overall behaviour has been changed.
This fixes the issue by applying the roundup to offlined memory cgroups
only, to give more preference to reclaim memory from offlined memory
cgroup.  It sounds reasonable as those memory is unlikedly to be used by
anyone.

The issue was found by starting up 8 VMs on a Ampere Mustang machine,
which has 8 CPUs and 16 GB memory.  Each VM is given with 2 vCPUs and
2GB memory.  It took 264 seconds for all VMs to be completely up and
784MB swap is consumed after that.  With this patch applied, it took 236
seconds and 60MB swap to do same thing.  So there is 10% performance
improvement for my case.  Note that KSM is disable while THP is enabled
in the testing.

         total     used    free   shared  buff/cache   available
   Mem:  16196    10065    2049       16        4081        3749
   Swap:  8175      784    7391
         total     used    free   shared  buff/cache   available
   Mem:  16196    11324    3656       24        1215        2936
   Swap:  8175       60    8115

Link: http://lkml.kernel.org/r/20200211024514.8730-1-gshan@redhat.com
Fixes: 68600f623d69 ("mm: don't miss the last page because of round-off error")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [4.20+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string.c: update match_string() doc-strings with correct behavior

There were a few attempts at changing behavior of the match_string()
helpers (i.e. 'match_string()' & 'sysfs_match_string()'), to change &
extend the behavior according to the doc-string.

But the simplest approach is to just fix the doc-strings. The current
behavior is fine as-is, and some bugs were introduced trying to fix it.

As for extending the behavior, new helpers can always be introduced if
needed.

The match_string() helpers behave more like 'strncmp()' in the sense
that they go up to n elements or until the first NULL element in the
array of strings.

This change updates the doc-strings with this info.

Link: http://lkml.kernel.org/r/20200213072722.8249-1-alexandru.ardelean@analog.com
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol.c: lost css_put in memcg_expand_shrinker_maps()

for_each_mem_cgroup() increases css reference counter for memory cgroup
and requires to use mem_cgroup_iter_break() if the walk is cancelled.

Link: http://lkml.kernel.org/r/c98414fb-7e1f-da0f-867a-9340ec4bd30b@virtuozzo.com
Fixes: 0a4465d34028 ("mm, memcg: assign memcg-aware shrinkers bitmap to memcg")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swapfile.c: fix a comment in sys_swapon()

claim_swapfile now always takes i_rwsem.

Link: http://lkml.kernel.org/r/20200114161225.309792-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: deprioritize old Fixes: addresses

Recently, I found that get_maintainer was causing me to send emails to
the old addresses for maintainers.  Since I usually just trust the
output of get_maintainer to know the right email address, I didn't even
look carefully and fired off two patch series that went to the wrong
place.  Oops.

The problem was introduced recently when trying to add signatures from
Fixes.  The problem was that these email addresses were added too early
in the process of compiling our list of places to send.  Things added to
the list earlier are considered more canonical and when we later added
maintainer entries we ended up deduplicating to the old address.

Here are two examples using mainline commits (to make it easier to
replicate) for the two maintainers that I messed up recently:

  $ git format-patch d8549bcd0529~..d8549bcd0529
  $ ./scripts/get_maintainer.pl 0001-clk-Add-clk_hw*.patch | grep Boyd
  Stephen Boyd <sboyd@codeaurora.org>...

  $ git format-patch 6d1238aa3395~..6d1238aa3395
  $ ./scripts/get_maintainer.pl 0001-arm64-dts-qcom-qcs404*.patch | grep Andy
  Andy Gross <andy.gross@linaro.org>

Let's move the adding of addresses from Fixes: to the end since the
email addresses from these are much more likely to be older.

After this patch the above examples get the right addresses for the two
examples.

Link: http://lkml.kernel.org/r/20200127095001.1.I41fba9f33590bfd92cd01960161d8384268c6569@changeid
Fixes: 2f5bd343694e ("scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

get_maintainer: remove uses of P: for maintainer name

Commit 1ca84ed6425f ("MAINTAINERS: Reclaim the P: tag for Maintainer
Entry Profile") changed the use of the "P:" tag from "Person" to
"Profile (ie: special subsystem coding styles and characteristics)"

Change how get_maintainer.pl parses the "P:" tag to match.

Link: http://lkml.kernel.org/r/ca53823fc5d25c0be32ad937d0207a0589c08643.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dan.j.william@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: add missed tests in run_vmtests

The commits introducing 'mlock-random-test'[1], 'map_fiex_noreplace'[2],
and 'thuge-gen'[3] have not added those in the 'run_vmtests' script and
thus the 'run_tests' command of kselftests doesn't run those. This
commit adds those in the script.

'gup_benchmark' and 'transhuge-stress' are also not included in the
'run_vmtests', but this commit does not add those because those are for
performance measurement rather than pass/fail tests.

[1] commit 26b4224d9961 ("selftests: expanding more mlock selftest")
[2] commit 91cbacc34512 ("tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE")
[3] commit fcc1f2d5dd34 ("selftests: add a test program for variable huge page sizes in mmap/shmget")

Link: http://lkml.kernel.org/r/20200206085144.29126-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap

QEMU has a funny new build error message when I use the upstream kernel
headers:

      CC      block/file-posix.o
    In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4,
                     from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29,
                     from /home/cborntra/REPOS/qemu/include/block/accounting.h:28,
                     from /home/cborntra/REPOS/qemu/include/block/block_int.h:27,
                     from /home/cborntra/REPOS/qemu/block/file-posix.c:30:
    /usr/include/linux/swab.h: In function `__swab':
    /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef]
       20 | #define BITS_PER_LONG           (sizeof (unsigned long) * BITS_PER_BYTE)
          |                                  ^~~~~~
    /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "("
       20 | #define BITS_PER_LONG           (sizeof (unsigned long) * BITS_PER_BYTE)
          |                                         ^
    cc1: all warnings being treated as errors
    make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1
    rm tests/qemu-iotests/socket_scm_helper.o

This was triggered by commit d5767057c9a ("uapi: rename ext2_swab() to
swab() and share globally in swab.h").  That patch is doing

  #include <asm/bitsperlong.h>

but it uses BITS_PER_LONG.

The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG.

Let us use the __ variant in swap.h

Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com
Fixes: d5767057c9a ("uapi: rename ext2_swab() to swab() and share globally in swab.h")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"

This reverts commit a97955844807e327df11aa33869009d14d6b7de0.

Commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage
in exit_sem()") removes a lock that is needed.  This leads to a process
looping infinitely in exit_sem() and can also lead to a crash.  There is
a reproducer available in [1] and with the commit reverted the issue
does not reproduce anymore.

Using the reproducer found in [1] is fairly easy to reach a point where
one of the child processes is looping infinitely in exit_sem between
for(;;) and if (semid == -1) block, while it's trying to free its last
sem_undo structure which has already been freed by freeary().

Each sem_undo struct is on two lists: one per semaphore set (list_id)
and one per process (list_proc).  The list_id list tracks undos by
semaphore set, and the list_proc by process.

Undo structures are removed either by freeary() or by exit_sem().  The
freeary function is invoked when the user invokes a syscall to remove a
semaphore set.  During this operation freeary() traverses the list_id
associated with the semaphore set and removes the undo structures from
both the list_id and list_proc lists.

For this case, exit_sem() is called at process exit.  Each process
contains a struct sem_undo_list (referred to as "ulp") which contains
the head for the list_proc list.  When the process exits, exit_sem()
traverses this list to remove each sem_undo struct.  As in freeary(),
whenever a sem_undo struct is removed from list_proc, it is also removed
from the list_id list.

Removing elements from list_id is safe for both exit_sem() and freeary()
due to sem_lock().  Removing elements from list_proc is not safe;
freeary() locks &un->ulp->lock when it performs
list_del_rcu(&un->list_proc) but exit_sem() does not (locking was
removed by commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list
lock usage in exit_sem()").

This can result in the following situation while executing the
reproducer [1] : Consider a child process in exit_sem() and the parent
in freeary() (because of semctl(sid[i], NSEM, IPC_RMID)).

- The list_proc for the child contains the last two undo structs A and
   B (the rest have been removed either by exit_sem() or freeary()).

- The semid for A is 1 and semid for B is 2.

- exit_sem() removes A and at the same time freeary() removes B.

- Since A and B have different semid sem_lock() will acquire different
   locks for each process and both can proceed.

The bug is that they remove A and B from the same list_proc at the same
time because only freeary() acquires the ulp lock. When exit_sem()
removes A it makes ulp->list_proc.next to point at B and at the same
time freeary() removes B setting B->semid=-1.

At the next iteration of for(;;) loop exit_sem() will try to remove B.

The only way to break from for(;;) is for (&un->list_proc ==
&ulp->list_proc) to be true which is not. Then exit_sem() will check if
B->semid=-1 which is and will continue looping in for(;;) until the
memory for B is reallocated and the value at B->semid is changed.

At that point, exit_sem() will crash attempting to unlink B from the
lists (this can be easily triggered by running the reproducer [1] a
second time).

To prove this scenario instrumentation was added to keep information
about each sem_undo (un) struct that is removed per process and per
semaphore set (sma).

          CPU0                                CPU1
  [caller holds sem_lock(sma for A)]      ...
  freeary()                               exit_sem()
  ...                                     ...
  ...                                     sem_lock(sma for B)
  spin_lock(A->ulp->lock)                 ...
  list_del_rcu(un_A->list_proc)           list_del_rcu(un_B->list_proc)

Undo structures A and B have different semid and sem_lock() operations
proceed.  However they belong to the same list_proc list and they are
removed at the same time.  This results into ulp->list_proc.next
pointing to the address of B which is already removed.

After reverting commit a97955844807 ("ipc,sem: remove uneeded
sem_undo_list lock usage in exit_sem()") the issue was no longer
reproducible.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1694779

Link: http://lkml.kernel.org/r/20191211191318.11860-1-ioanna-maria.alifieraki@canonical.com
Fixes: a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()")
Signed-off-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Herton R. Krzesinski <herton@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: <malat@debian.org>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

y2038: hide timeval/timespec/itimerval/itimerspec types

There are no in-kernel users remaining, but there may still be users that
include linux/time.h instead of sys/time.h from user space, so leave the
types available to user space while hiding them from kernel space.

Only the __kernel_old_* versions of these types remain now.

Link: http://lkml.kernel.org/r/20200110154232.4104492-4-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

y2038: remove unused time32 interfaces

No users remain, so kill these off before we grow new ones.

Link: http://lkml.kernel.org/r/20200110154232.4104492-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

y2038: remove ktime to/from timespec/timeval conversion

A couple of helpers are now obsolete and can be removed, so drivers can no
longer start using them and instead use y2038-safe interfaces.

Link: http://lkml.kernel.org/r/20200110154232.4104492-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()

Commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") overlooked the fact that fixed events can wake
up the system too and broke RTC wakeup from suspend-to-idle as a
result.

Fix this issue by checking the fixed events in acpi_s2idle_wake() in
addition to checking wakeup GPEs and break out of the suspend-to-idle
loop if the status bits of any enabled fixed events are set then.

Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'drm-intel-fixes-2020-02-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc3:
- Workaround missing Display Stream Compression (DSC) state readout by
forcing modeset when its enabled at probe
- Fix EHL port clock voltage level requirements
- Fix queuing retire workers on the virtual engine
- Fix use of partially initialized waiters
- Stop using drm_pci_alloc/drm_pci/free
- Fix rewind of RING_TAIL by forcing a context reload
- Fix locking on resetting ring->head
- Propagate our bug filing URL change to stable kernels

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2sxtsrd.fsf@intel.com

Merge tag 'drm-misc-fixes-2020-02-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v5.6-rc3:
- Fix dt binding for sunxi.
- Allow only 1 rotation argument, and allow 0 rotation in video cmdline.
- Small compiler warning fix for panfrost.
- Fix when using performance counters in panfrost when using per fd address space.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f5a6370d-9898-6c72-43e4-5bb56a99b6f2@linux.intel.com

Merge branch 'bnxt_en-shutdown-and-kexec-kdump-related-fixes'

Michael Chan says:

====================
bnxt_en: shutdown and kexec/kdump related fixes.

2 small patches to fix kexec shutdown and kdump kernel driver init issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.

If crashed kernel does not shutdown the NIC properly, PCIe FLR
is required in the kdump kernel in order to initialize all the
functions properly.

Fixes: d629522e1d66 ("bnxt_en: Reduce memory usage when running in kdump kernel.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Improve device shutdown method.

Especially when bnxt_shutdown() is called during kexec, we need to
disable MSIX and disable Bus Master to completely quiesce the device.
Make these 2 calls unconditionally in the shutdown method.

Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: netlink: cap max groups which will be considered in netlink_bind()

Since nl_groups is a u32 we can't bind more groups via ->bind
(netlink_bind) call, but netlink has supported more groups via
setsockopt() for a long time and thus nlk->ngroups could be over 32.
Recently I added support for per-vlan notifications and increased the
groups to 33 for NETLINK_ROUTE which exposed an old bug in the
netlink_bind() code causing out-of-bounds access on archs where unsigned
long is 32 bits via test_bit() on a local variable. Fix this by capping the
maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively
capping them at 32 which is the minimum of allocated groups and the
maximum groups which can be bound via netlink_bind().

CC: Christophe Leroy <christophe.leroy@c-s.fr>
CC: Richard Guy Briggs <rgb@redhat.com>
Fixes: 4f520900522f ("netlink: have netlink per-protocol bind function return an error code.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: thunderx: workaround BGX TX Underflow issue

While it is not yet understood why a TX underflow can easily occur
for SGMII interfaces resulting in a TX wedge. It has been found that
disabling/re-enabling the LMAC resolves the issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: fix fw_status read

The fw_status field is only 8 bits, so fix the read. Also,
we only want to look at the one status bit, to allow for future
use of the other bits, and watch for a bad PCI read.

Fixes: 97ca486592c0 ("ionic: add heartbeat check")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'next-integrity' of git://git./linux/kernel/git/zohar/linux-integrity

Pull IMA fixes from Mimi Zohar:
"Two bug fixes and an associated change for each.

  The one that adds SM3 to the IMA list of supported hash algorithms is
  a simple change, but could be considered a new feature"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: add sm3 algorithm to hash algorithm configuration list
  crypto: rename sm3-256 to sm3 in hash_algo_name
  efi: Only print errors about failing to get certs if EFI vars are found
  x86/ima: use correct identifier for SetupMode variable

net: disable BRIDGE_NETFILTER by default

The description says 'If unsure, say N.' but
the module is built as M by default (once
the dependencies are satisfied).

When the module is selected (Y or M), it enables
NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS
which alter kernel internal structures.

We (Android Studio Emulator) currently do not
use this module and think this it is more consistent
to have it disabled by default as opposite to
disabling it explicitly to prevent enabling
NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Properly handle phylink on at91rm9200

at91ether_init was handling the phy mode and speed but since the switch to
phylink, the NCFGR register got overwritten by macb_mac_config(). The issue
is that the RM9200_RMII bit and the MACB_CLK_DIV32 field are cleared
but never restored as they conflict with the PAE, GBE and PCSSEL bits.

Add new capability to differentiate between EMAC and the other versions of
the IP and use it to set and avoid clearing the relevant bits.

Also, this fixes a NULL pointer dereference in macb_mac_link_up as the EMAC
doesn't use any rings/bufffers/queues.

Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 's390-fixes'

Julian Wiedmann says:

====================
s390/qeth: fixes 2020-02-20

please apply the following patch series for qeth to netdev's net tree.

This corrects three minor issues:
1) return a more fitting errno when VNICC cmds are not supported,
2) remove a bogus WARN in the NAPI code, and
3) be _very_ pedantic about the RX copybreak.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: fix off-by-one in RX copybreak check

The RX copybreak is intended as the _max_ value where the frame's data
should be copied. So for frame_len == copybreak, don't build an SG skb.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: don't warn for napi with 0 budget

Calling napi->poll() with 0 budget is a legitimate use by netpoll.

Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: vnicc Fix EOPNOTSUPP precedence

When getting or setting VNICC parameters, the error code EOPNOTSUPP
should have precedence over EBUSY.

EBUSY is used because vnicc feature and bridgeport feature are mutually
exclusive, which is a temporary condition.
Whereas EOPNOTSUPP indicates that the HW does not support all or parts of
the vnicc feature.
This issue causes the vnicc sysfs params to show 'blocked by bridgeport'
for HW that does not support VNICC at all.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: Distribute switch variables for initialization

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

net/openvswitch/flow_netlink.c: In function ‘validate_set’:
net/openvswitch/flow_netlink.c:2711:29: warning: statement will never be executed [-Wswitch-unreachable]
2711 | const struct ovs_key_ipv4 *ipv4_key;
| ^~~~~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ip6_gre: Distribute switch variables for initialization

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

net/ipv6/ip6_gre.c: In function ‘ip6gre_err’:
net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable]
  440 |   struct ipv6_tlv_tnl_enc_lim *tel;
      |                                ^~~

net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’:
net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable]
  520 |   struct ipv6_tlv_tnl_enc_lim *tel;
      |                                ^~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: core: Distribute switch variables for initialization

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

net/core/skbuff.c: In function ‘skb_checksum_setup_ip’:
net/core/skbuff.c:4809:7: warning: statement will never be executed [-Wswitch-unreachable]
4809 | int err;
| ^~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'linux-5.6' of git://github.com/skeggsb/linux into drm-fixes

Nothing major here, another TU1xx modesetting fix, and hooking up
ACR/GR support on TU11x now that NVIDIA have made the firmware
available.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

Merge tag 'linux-kselftest-5.6-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
"Fixes to build failures and other test bugs"

* tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: openat2: fix build error on newer glibc
  selftests: use LDLIBS for libraries instead of LDFLAGS
  selftests: fix too long argument
  selftests: allow detection of build failures
  Kernel selftests: tpm2: check for tpm support
  selftests/ftrace: Have pid filter test use instance flag
  selftests: fix spelling mistaked "chaigned" -> "chained"

Merge tag 'drm-msm-fixes-2020-02-16' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

+ fix UBWC on GPU and display side for sc7180
+ fix DSI suspend/resume issue encountered on sc7180
+ fix some breakage on so called "linux-android" devices
(fallout from sc7180/a618 support, not seen earlier
due to bootloader/firmware differences)
+ couple other misc fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

Merge tag 'amd-drm-fixes-5.6-2020-02-19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-02-19:

amdgpu:
- HDCP fixes
- xclk fix for raven
- GFXOFF fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219173954.3847-1-alexander.deucher@amd.com

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2020-02-19

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 93 insertions(+), 31 deletions(-).

The main changes are:

1) batched bpf hashtab fixes from Brian and Yonghong.

2) various selftests and libbpf fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2020-02-19

This series contains fixes to the ice driver.

Brett fixes an issue where if a user sets an odd [tx|rx]-usecs value
through ethtool, the request is denied because the hardware is set to
have an ITR with 2us granularity. Also fix an issue where the VF has
not been completely removed/reset after being unbound from the host
driver, so resolve this by waiting for the VF remove/reset process to
happen before checking if the VF is disabled.

Michal fixes an issue, where when the user changes flow control via
ethtool, the OS is told the link is going down when that may not be the
case. Before the fix, the only way to get out of this state was to take
the interface down and up again.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

udp: rehash on disconnect

As of the below commit, udp sockets bound to a specific address can
coexist with one bound to the any addr for the same port.

The commit also phased out the use of socket hashing based only on
port (hslot), in favor of always hashing on {addr, port} (hslot2).

The change broke the following behavior with disconnect (AF_UNSPEC):

    server binds to 0.0.0.0:1337
    server connects to 127.0.0.1:80
    server disconnects
    client connects to 127.0.0.1:1337
    client sends "hello"
    server reads "hello" // times out, packet did not find sk

On connect the server acquires a specific source addr suitable for
routing to its destination. On disconnect it reverts to the any addr.

The connect call triggers a rehash to a different hslot2. On
disconnect, add the same to return to the original hslot2.

Skip this step if the socket is going to be unhashed completely.

Fixes: 4cdeeee9252a ("net: udp: prefer listeners bound to an address")
Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/tls: Fix to avoid gettig invalid tls record

Current code doesn't check if tcp sequence number is starting from (/after)
1st record's start sequnce number. It only checks if seq number is before
1st record's end sequnce number. This problem will always be a possibility
in re-transmit case. If a record which belongs to a requested seq number is
already deleted, tls_get_record will start looking into list and as per the
check it will look if seq number is before the end seq of 1st record, which
will always be true and will return 1st record always, it should in fact
return NULL.
As part of the fix, start looking each record only if the sequence number
lies in the list else return NULL.
There is one more check added, driver look for the start marker record to
handle tcp packets which are before the tls offload start sequence number,
hence return 1st record if the record is tls start marker and seq number is
before the 1st record's starting sequence number.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: Fix a potential deadlock with bpf_map_do_batch

Commit 057996380a42 ("bpf: Add batch ops to all htab bpf map")
added lookup_and_delete batch operation for hash table.
The current implementation has bpf_lru_push_free() inside
the bucket lock, which may cause a deadlock.

syzbot reports:
   -> #2 (&htab->buckets[i].lock#2){....}:
       __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
       _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:159
       htab_lru_map_delete_node+0xce/0x2f0 kernel/bpf/hashtab.c:593
       __bpf_lru_list_shrink_inactive kernel/bpf/bpf_lru_list.c:220 [inline]
       __bpf_lru_list_shrink+0xf9/0x470 kernel/bpf/bpf_lru_list.c:266
       bpf_lru_list_pop_free_to_local kernel/bpf/bpf_lru_list.c:340 [inline]
       bpf_common_lru_pop_free kernel/bpf/bpf_lru_list.c:447 [inline]
       bpf_lru_pop_free+0x87c/0x1670 kernel/bpf/bpf_lru_list.c:499
       prealloc_lru_pop+0x2c/0xa0 kernel/bpf/hashtab.c:132
       __htab_lru_percpu_map_update_elem+0x67e/0xa90 kernel/bpf/hashtab.c:1069
       bpf_percpu_hash_update+0x16e/0x210 kernel/bpf/hashtab.c:1585
       bpf_map_update_value.isra.0+0x2d7/0x8e0 kernel/bpf/syscall.c:181
       generic_map_update_batch+0x41f/0x610 kernel/bpf/syscall.c:1319
       bpf_map_do_batch+0x3f5/0x510 kernel/bpf/syscall.c:3348
       __do_sys_bpf+0x9b7/0x41e0 kernel/bpf/syscall.c:3460
       __se_sys_bpf kernel/bpf/syscall.c:3355 [inline]
       __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:3355
       do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

   -> #0 (&loc_l->lock){....}:
       check_prev_add kernel/locking/lockdep.c:2475 [inline]
       check_prevs_add kernel/locking/lockdep.c:2580 [inline]
       validate_chain kernel/locking/lockdep.c:2970 [inline]
       __lock_acquire+0x2596/0x4a00 kernel/locking/lockdep.c:3954
       lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4484
       __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
       _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:159
       bpf_common_lru_push_free kernel/bpf/bpf_lru_list.c:516 [inline]
       bpf_lru_push_free+0x250/0x5b0 kernel/bpf/bpf_lru_list.c:555
       __htab_map_lookup_and_delete_batch+0x8d4/0x1540 kernel/bpf/hashtab.c:1374
       htab_lru_map_lookup_and_delete_batch+0x34/0x40 kernel/bpf/hashtab.c:1491
       bpf_map_do_batch+0x3f5/0x510 kernel/bpf/syscall.c:3348
       __do_sys_bpf+0x1f7d/0x41e0 kernel/bpf/syscall.c:3456
       __se_sys_bpf kernel/bpf/syscall.c:3355 [inline]
       __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:3355
       do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

    Possible unsafe locking scenario:

          CPU0                    CPU2
          ----                    ----
     lock(&htab->buckets[i].lock#2);
                                  lock(&l->lock);
                                  lock(&htab->buckets[i].lock#2);
     lock(&loc_l->lock);

    *** DEADLOCK ***

To fix the issue, for htab_lru_map_lookup_and_delete_batch() in CPU0,
let us do bpf_lru_push_free() out of the htab bucket lock. This can
avoid the above deadlock scenario.

Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map")
Reported-by: syzbot+a38ff3d9356388f2fb83@syzkaller.appspotmail.com
Reported-by: syzbot+122b5421d14e68f29cd1@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200219234757.3544014-1-yhs@fb.com

bpf: Do not grab the bucket spinlock by default on htab batch ops

Grabbing the spinlock for every bucket even if it's empty, was causing
significant perfomance cost when traversing htab maps that have only a
few entries. This patch addresses the issue by checking first the
bucket_cnt, if the bucket has some entries then we go and grab the
spinlock and proceed with the batching.

Tested with a htab of size 50K and different value of populated entries.

Before:
  Benchmark             Time(ns)        CPU(ns)
  ---------------------------------------------
  BM_DumpHashMap/1       2759655        2752033
  BM_DumpHashMap/10      2933722        2930825
  BM_DumpHashMap/200     3171680        3170265
  BM_DumpHashMap/500     3639607        3635511
  BM_DumpHashMap/1000    4369008        4364981
  BM_DumpHashMap/5k     11171919       11134028
  BM_DumpHashMap/20k    69150080       69033496
  BM_DumpHashMap/39k   190501036      190226162

After:
  Benchmark             Time(ns)        CPU(ns)
  ---------------------------------------------
  BM_DumpHashMap/1        202707         200109
  BM_DumpHashMap/10       213441         210569
  BM_DumpHashMap/200      478641         472350
  BM_DumpHashMap/500      980061         967102
  BM_DumpHashMap/1000    1863835        1839575
  BM_DumpHashMap/5k      8961836        8902540
  BM_DumpHashMap/20k    69761497       69322756
  BM_DumpHashMap/39k   187437830      186551111

Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200218172552.215077-1-brianvv@google.com

ice: Wait for VF to be reset/ready before configuration

The configuration/command below is failing when the VF in the xml
file is already bound to the host iavf driver.

pci_0000_af_0_0.xml:

<interface type='hostdev' managed='yes'>
<source>
<address type='pci' domain='0x0000' bus='0xaf' slot='0x0' function='0x0'/>
</source>
<mac address='00:de:ad:00:11:01'/>
</interface>

> virsh attach-device domain_name pci_0000_af_0_0.xml
error: Failed to attach device from pci_0000_af_0_0.xml
error: Cannot set interface MAC/vlanid to 00:de:ad:00:11:01/0 for
ifname ens1f1 vf 0: Device or resource busy

This is failing because the VF has not been completely removed/reset
after being unbound (via the virsh command above) from the host iavf
driver and ice_set_vf_mac() checks if the VF is disabled before waiting
for the reset to finish.

Fix this by waiting for the VF remove/reset process to happen before
checking if the VF is disabled. Also, since many functions for VF
administration on the PF were more or less calling the same 3 functions
(ice_wait_on_vf_reset(), ice_is_vf_disabled(), and ice_check_vf_init())
move these into the helper function ice_check_vf_ready_for_cfg(). Then
call this function in any flow that attempts to configure/query a VF
from the PF.

Lastly, increase the maximum wait time in ice_wait_on_vf_reset() to
800ms, and modify/add the #define(s) that determine the wait time.
This was done for robustness because in rare/stress cases VF removal can
take a max of ~800ms and previously the wait was a max of ~300ms.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Don't tell the OS that link is going down

Remove code that tell the OS that link is going down when user
change flow control via ethtool. When link is up it isn't certain
that link goes down after 0x0605 aq command. If link doesn't go
down, OS thinks that link is down, but physical link is up. To
reset this state user have to take interface down and up.

If link goes down after 0x0605 command, FW send information
about that and after that driver tells the OS that the link goes
down. So this code in ethtool is unnecessary.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Don't reject odd values of usecs set by user

Currently if a user sets an odd [tx|rx]-usecs value through ethtool,
the request is denied because the hardware is set to have an ITR
granularity of 2us. This caused poor customer experience. Fix this by
aligning to a register allowed value, which results in rounding down.
Also, print a once per ring container type message to be clear about
our intentions.

Also, change the ITR_TO_REG define to be the bitwise and of the ITR
setting and the ICE_ITR_MASK. This makes the purpose of ITR_TO_REG more
obvious.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

bridge: br_stp: Use built-in RCU list checking

list_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: pn544: Fix occasional HW initialization failure

The PN544 driver checks the "enable" polarity during of driver's probe and
it's doing that by turning ON and OFF NFC with different polarities until
enabling succeeds. It takes some time for the hardware to power-down, and
thus, to deassert the IRQ that is raised by turning ON the hardware.
Since the delay after last power-down of the polarity-checking process is
missed in the code, the interrupt may trigger immediately after installing
the IRQ handler (right after the checking is done), which results in IRQ
handler trying to touch the disabled HW and ends with marking NFC as
'DEAD' during of the driver's probe:

  pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high
  pn544_hci_i2c 1-002a: NFC: invalid len byte
  shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead

This patch fixes the occasional NFC initialization failure on Nexus 7
device.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hsr: Pass lockdep expression to RCU lists

node_db is traversed using list_for_each_entry_rcu
outside an RCU read-side critical section but under the protection
of hsr->list_lock.

Hence, add corresponding lockdep expression to silence false-positive
warnings, and harden RCU lists.

Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2020-02-18' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2020-02-18

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v5.3
('net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa')

For -stable v5.4
('net/mlx5: DR, Fix matching on vport gvmi')
('net/mlx5e: Fix crash in recovery flow without devlink reporter')

For -stable v5.5
('net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY')
('net/mlx5e: Don't clear the whole vf config when switching modes')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'iommu-fixes-v5.6-rc2' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- Compile warning fix for the Intel IOMMU driver

- Fix kdump boot with Intel IOMMU enabled and in passthrough mode

- Disable AMD IOMMU on a Laptop/Embedded platform because the delay it
   introduces in DMA transactions causes screen flickering there with 4k
   monitors

- Make domain_free function in QCOM IOMMU driver robust and not leak
   memory/dereference NULL pointers

- Fix ARM-SMMU module parameter prefix names

* tag 'iommu-fixes-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: Restore naming of driver parameter prefix
  iommu/qcom: Fix bogus detach logic
  iommu/amd: Disable IOMMU on Stoney Ridge systems
  iommu/vt-d: Simplify check in identity_mapping()
  iommu/vt-d: Remove deferred_attach_domain()
  iommu/vt-d: Do deferred attachment in iommu_need_mapping()
  iommu/vt-d: Move deferred device attachment into helper function
  iommu/vt-d: Add attach_deferred() helper
  iommu/vt-d: Fix compile warning from intel-svm.h

Merge tag 'sound-5.6-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"The only largish change in this pull request is about the revert of
  the recent max98090 and its relevant patches due to regressions.

  Other than that, all small fixes for ALSA core (covering KCSAN fuzzer
  warnings in ALSA sequencer and rawmidi), Intel SOF HD-audio fixes, AMD
  ACP fixes, usual HD-audio quirks, and various ASoC fixes"

* tag 'sound-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs
  ALSA: hda/realtek - Apply quirk for yet another MSI laptop
  ASoC: sun8i-codec: Fix setting DAI data format
  ALSA: hda/realtek - Apply quirk for MSI GP63, too
  ASoC: amd: ACP needs to be powered off in BIOS.
  ASoC: hdmi-codec: set plugged_cb to NULL when component removing
  ASoC: dapm: remove snd_soc_dapm_put_enum_double_locked
  ASoC: max98090: revert invalid fix for handling SHDN
  ALSA: rawmidi: Avoid bit fields for state flags
  ALSA: seq: Fix concurrent access to queue current tick/time
  ALSA: seq: Avoid concurrent access to queue flags
  ASoC: codec2codec: avoid invalid/double-free of pcm runtime
  ASoC: amd: Buffer Size instead of MAX Buffer
  ASoC: SOF: Intel: hda: move i915 init earlier
  ASoC: SOF: Intel: hda: fix ordering bug in resume flow
  ALSA: hda: do not override bus codec_mask in link_get()
  ASoC: atmel: fix atmel_ssc_set_audio link failure
  ASoC: fsl_sai: Fix exiting path on probing failure

drm/amdgpu/display: clean up hdcp workqueue handling

Use the existence of the workqueue itself to determine when to
enable HDCP features rather than sprinkling asic checks all over
the code. Also add a check for the existence of the hdcp
workqueue in the irq handling on the off chance we get and HPD
RX interrupt with the CP bit set. This avoids a crash if
the driver doesn't support HDCP for a particular asic.

Fixes: 96a3b32e67236f ("drm/amd/display: only enable HDCP for DCN+")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206519
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add is_raven_kicker judgement for raven1

The rlc version of raven_kicer_rlc is different from the legacy rlc
version of raven_rlc. So it needs to add a judgement function for
raven_kicer_rlc and avoid disable GFXOFF when loading raven_kicer_rlc.

Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

iommu/arm-smmu: Restore naming of driver parameter prefix

Extending the Arm SMMU driver to allow for modular builds changed
KBUILD_MODNAME to be "arm_smmu_mod" so that a single module could be
built from the multiple existing object files without the need to rename
any source files.

This inadvertently changed the name of the driver parameters, which may
lead to runtime issues if bootloaders are relying on the old names for
correctness (e.g. "arm-smmu.disable_bypass=0").

Although MODULE_PARAM_PREFIX can be overridden to restore the old naming
for builtin parameters, only the new name is matched by modprobe and so
loading the driver as a module would cause parameters specified on the
kernel command line to be ignored. Instead, rename "arm_smmu_mod" to
"arm_smmu". Whilst it's a bit of a bodge, this allows us to create a
single module without renaming any files and makes use of the fact that
underscores and hyphens can be used interchangeably in parameter names.

Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Reported-by: Li Yang <leoyang.li@nxp.com>
Fixes: cd221bd24ff5 ("iommu/arm-smmu: Allow building as a module")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

iommu/qcom: Fix bogus detach logic

Currently, the implementation of qcom_iommu_domain_free() is guaranteed
to do one of two things: WARN() and leak everything, or dereference NULL
and crash. That alone is terrible, but in fact the whole idea of trying
to track the liveness of a domain via the qcom_domain->iommu pointer as
a sanity check is full of fundamentally flawed assumptions. Make things
robust and actually functional by not trying to be quite so clever.

Reported-by: Brian Masney <masneyb@onstation.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Joerg Roedel <jroedel@suse.de>

iommu/amd: Disable IOMMU on Stoney Ridge systems

Serious screen flickering when Stoney Ridge outputs to a 4K monitor.

Use identity-mapping and PCI ATS doesn't help this issue.

According to Alex Deucher, IOMMU isn't enabled on Windows, so let's do
the same here to avoid screen flickering on 4K monitor.

Cc: Alex Deucher <alexander.deucher@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/issues/961
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

net/mlx5: DR, Handle reformat capability over sw-steering tables

On flow table creation, send the relevant flags according to what the FW
currently supports.
When FW doesn't support reformat option over SW-steering managed table,
the driver shouldn't pass this.

Fixes: 988fd6b32d07 ("net/mlx5: DR, Pass table flags at creation to lower layer")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix lowest FDB pool size

The pool sizes represent the pool sizes in the fw. when we request
a pool size from fw, it will return the next possible group.
We track how many pools the fw has left and start requesting groups
from the big to the small.
When we start request 4k group, which doesn't exists in fw, fw
wants to allocate the next possible size, 64k, but will fail since
its exhausted. The correct smallest pool size in fw is 128 and not 4k.

Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Don't clear the whole vf config when switching modes

There is no need to reset all vf config (except link state) between
legacy and switchdev modes changes.
Also, set link state to AUTO, when legacy enabled.

Fixes: 3b83b6c2e024 ("net/mlx5e: Clear VF config when switching modes")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: DR, Fix matching on vport gvmi

Set vport gvmi in the tag, only when source gvmi is set in the bit mask.

Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix crash in recovery flow without devlink reporter

When health reporters are not supported, recovery function is invoked
directly, not via devlink health reporters.

In this direct flow, the recover function input parameter was passed
incorrectly and is causing a kernel oops. This patch is fixing the input
parameter.

Following call trace is observed on rx error health reporting.

Internal error: Oops: 96000007 [#1] PREEMPT SMP
Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703)
Call trace:
mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core]
mlx5e_health_report+0x60/0x6c [mlx5_core]
mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core]
mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core]
process_one_work+0x168/0x3d0
worker_thread+0x58/0x3d0
kthread+0x108/0x134

Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY

Initialize RQ doorbell counters to zero prior to moving an RQ from RST
to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor
ID on the completion is reset. The doorbell record must comply.

Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa

rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa
cannot take mutex lock. Two possible issues can happen:
1. User at the same time change vepa mode via RTM_SETLINK command.
2. User at the same time change the switchdev mode via devlink netlink
interface.

Case 1 cannot happen because rtnl executes one message in order.
Case 2 can happen but we do not expect user to change the switchdev mode
when changing vepa. Even if a user does it, so he will read a value
which is no longer valid.

Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

This batch contains Netfilter fixes for net:

1) Restrict hashlimit size to 1048576, from Cong Wang.

2) Check for offload flags from nf_flow_table_offload_setup(),
   this fixes a crash in case the hardware offload is disabled.
   From Florian Westphal.

3) Three preparation patches to extend the conntrack clash resolution,
   from Florian.

4) Extend clash resolution to deal with DNS packets from the same flow
   racing to set up the NAT configuration.

5) Small documentation fix in pipapo, from Stefano Brivio.

6) Remove misleading unlikely() from pipapo_refill(), also from Stefano.

7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually
   triggering another problem, still under discussion, another patch to
   fix this will follow up.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:

- give command line cma= precedence over the CONFIG_ option (Nicolas
   Saenz Julienne)

- always allow 32-bit DMA, even for weirdly placed ZONE_DMA

- improve the debug printks when memory is not addressable, to help
   find problems with swiotlb initialization

* tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: improve DMA mask overflow reporting
  dma-direct: improve swiotlb error reporting
  dma-direct: relax addressability checks in dma_direct_supported
  dma-contiguous: CMA: give precedence to cmdline

Merge tag 'tpmdd-next-20200217' of git://git.infradead.org/users/jjs/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes"

* tag 'tpmdd-next-20200217' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Initialize crypto_id of allocated_banks to HASH_ALGO__LAST
tpm: Revert tpm_tis_spi_mod.ko to tpm_tis_spi.ko.

pipe: make sure to wake up everybody when the last reader/writer closes

Andrei Vagin reported that commit 0ddad21d3e99 ("pipe: use exclusive
waits when reading or writing") broke one of the CRIU tests.  He even
has a trivial reproducer:

    #include <unistd.h>
    #include <sys/types.h>
    #include <sys/wait.h>

    int main()
    {
            int p[2];
            pid_t p1, p2;
            int status;

            if (pipe(p) == -1)
                    return 1;

            p1 = fork();
            if (p1 == 0) {
                    close(p[1]);
                    read(p[0], &status, sizeof(status));
                    return 0;
            }
            p2 = fork();
            if (p2 == 0) {
                    close(p[1]);
                    read(p[0], &status, sizeof(status));
                    return 0;
            }
            sleep(1);
            close(p[1]);
            wait(&status);
            wait(&status);

            return 0;
    }

and the problem - once he points it out - is obvious.  We use these nice
exclusive waits, but when the last writer goes away, it then needs to
wake up _every_ reader (and conversely, the last reader disappearing
needs to wake every writer, of course).

In fact, when going through this, we had several small oddities around
how to wake things.  We did in fact wake every reader when we changed
the size of the pipe buffers.  But that's entirely pointless, since that
just acts as a possible source of new space - no new data to read.

And when we change the size of the buffer, we don't need to wake all
writers even when we add space - that case acts just as if somebody made
space by reading, and any writer that finds itself not filling it up
entirely will wake the next one.

On the other hand, on the exit path, we tried to limit the wakeups with
the proper poll keys etc, which is entirely pointless, because at that
point we obviously need to wake up everybody.  So don't do that: just
wake up everybody - but only do that if the counts changed to zero.

So fix those non-IO wakeups to be more proper: space change doesn't add
any new data, but it might make room for writers, so it wakes up a
writer.  And the actual changes to reader/writer counts should wake up
everybody, since everybody is affected (ie readers will all see EOF if
the writers have gone away, and writers will all get EPIPE if all
readers have gone away).

Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Reported-and-tested-by: Andrei Vagin <avagin@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

netfilter: nft_set_pipapo: Don't abuse unlikely() in pipapo_refill()

I originally used unlikely() in the if (match_only) clause, which
we hit on the mapping table for the last field in a set, to ensure
we avoid branching to the rest of for loop body, which is executed
more frequently.

However, Pablo reports, this is confusing as it gives the impression
that this is not a common case, and it's actually not the intended
usage of unlikely().

I couldn't observe any statistical difference in matching rates on
x864_64 and aarch64 without it, so just drop it.

Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: Fix mapping table example in comments

In both insertion and lookup examples, the two element pointers
of rule mapping tables were swapped. Fix that.

Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

flow_table.c: Use built-in RCU list checking

hlist_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

datapath.c: Use built-in RCU list checking

hlist_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vport.c: Use built-in RCU list checking

hlist_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

meter.c: Use built-in RCU list checking

hlist_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlabel_domainhash.c: Use built-in RCU list checking

list_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: netlabel: Use built-in RCU list checking

list_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: dev: introduce support for sch BYPASS for lockless qdisc"

This reverts commit ba27b4cdaaa66561aaedb2101876e563738d36fe

Ahmed reported ouf-of-order issues bisected to commit ba27b4cdaaa6
("net: dev: introduce support for sch BYPASS for lockless qdisc").
I can't find any working solution other than a plain revert.

This will introduce some minor performance regressions for
pfifo_fast qdisc. I plan to address them in net-next with more
indirect call wrapper boilerplate for qdiscs.

Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes: ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: broadcom: Fix a typo ("firsly")

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix bogus socket flag values

Dan Carpenter reports static checker warnings due to bogus BIT() usage:

net/mptcp/subflow.c:571 subflow_write_space() warn: test_bit() takes a bit number
net/mptcp/subflow.c:694 subflow_state_change() warn: test_bit() takes a bit number
net/mptcp/protocol.c:261 ssk_check_wmem() warn: test_bit() takes a bit number
[..]

This is harmless (we use bits 1 & 2 instead of 0 and 1), but would
break eventually when adding BIT(5) (or 6, depends on size of 'long').

Just use 0 and 1, the values are only passed to test/set/clear_bit
functions.

Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

qede: Fix race between rdma destroy workqueue and link change event

If an event is added while the rdma workqueue is being destroyed
it could lead to several races, list corruption, null pointer
dereference during queue_work or init_queue.
This fixes the race between the two flows which can occur during
shutdown.

A kref object and a completion object are added to the rdma_dev
structure, these are initialized before the workqueue is created.
The refcnt is used to indicate work is being added to the
workqueue and ensures the cleanup flow won't start while we're in
the middle of adding the event.
Once the work is added, the refcnt is decreased and the cleanup flow
is safe to run.

Fixes: cee9fbd8e2e ("qede: Add qedr framework")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'thunderbolt-fix-for-v5.6-rc3' of git://git./linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:

thunderbolt: Fix for v5.6-rc3

Single fix that orders the THUNDERBOLT MAINTAINERS record according to
parse-maintainers.pl.

* tag 'thunderbolt-fix-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
MAINTAINERS: Sort entries in database for THUNDERBOLT

iommu/vt-d: Simplify check in identity_mapping()

The function only has one call-site and there it is never called with
dummy or deferred devices. Simplify the check in the function to
account for that.

Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>