Zoltan Herpai [Sun, 9 Aug 2015 12:25:18 +0000 (12:25 +0000)]
sunxi: add support for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46571
Hauke Mehrtens [Sun, 9 Aug 2015 11:09:52 +0000 (11:09 +0000)]
kernel: update 3.18 to 3.18.20
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46570
Felix Fietkau [Fri, 7 Aug 2015 08:36:36 +0000 (08:36 +0000)]
ipq806x: enable NAND flash support in the kernel
Previous patch set backported the recently posted NAND flash driver to
3.18 and 4.1 kernel. This patch now enables it in the kernel config.
There is no change to the partition layout and init yet. But the NAND
flash can be seen in the mtd list on an AP148:
root@OpenWrt:/# cat /proc/mtd
dev: size erasesize name
mtd0:
10000000 00020000 "qcom-nandc"
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46569
Felix Fietkau [Fri, 7 Aug 2015 08:36:31 +0000 (08:36 +0000)]
ipq806x: add NAND flash controller support
These patches add support for ipq806x NAND flash controller. Most of
these are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/8/3/16
This patch just modifies the kernel code, but doesn't change the config.
It should be harmless.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46568
Felix Fietkau [Fri, 7 Aug 2015 08:36:16 +0000 (08:36 +0000)]
ipq806x: Add ADM support
These are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/3/17/19
They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are
applying changes merged since 3.18; they enable mechanisms used by the
ADM driver.
ADM engine is used by the NAND controller, so it is necessary to
bring-up NAND flash support.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46567
Jonas Gorski [Wed, 5 Aug 2015 13:56:20 +0000 (13:56 +0000)]
mac80211: mwl8k: init devices synchronously
Make sure phys are probed and present before we detect wifis.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46566
Jonas Gorski [Wed, 5 Aug 2015 13:56:02 +0000 (13:56 +0000)]
kirkwood: add wpad-mini to router profiles
Without it the wifi isn't really usable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46565
Jonas Gorski [Wed, 5 Aug 2015 13:55:52 +0000 (13:55 +0000)]
image: fix jffs2(_nand) image generation
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.
Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46564
Jonas Gorski [Wed, 5 Aug 2015 13:55:42 +0000 (13:55 +0000)]
brcm63xx: fix crash on 6358/6368 when booting from thread 1
It looks like RAC flushes cause random corruption(?) when the
second thread is set as default.
Fixes #20160.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46563
Jonas Gorski [Wed, 5 Aug 2015 13:55:37 +0000 (13:55 +0000)]
brcm63xx: Add support for Plusnet 2704N
BCM6318: add support for Plusnet / Sagem 2704N (V1)
Signed-off-by: Matt Goring <matt.goring@googlemail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46562
Jonas Gorski [Wed, 5 Aug 2015 13:55:18 +0000 (13:55 +0000)]
brcm63xx: build image for DSL-275XB D1
It boots fine, so no reason to not build it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46561
Jonas Gorski [Wed, 5 Aug 2015 13:55:14 +0000 (13:55 +0000)]
kernel: update 4.1 to 4.1.4
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[jogo: fix brcm2708 patches, refresh target patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46560
Felix Fietkau [Tue, 4 Aug 2015 23:10:18 +0000 (23:10 +0000)]
ipq806x: add ethernet (stmmac) support
We forgot to enable the stmmac driver for 4.1 kernel, so ethernet
interfaces don't show-up on this kernel.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46559
Felix Fietkau [Tue, 4 Aug 2015 23:10:12 +0000 (23:10 +0000)]
ipq806x: refresh kernel configs
Remove options which have been moved into the generic config ever since.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46558
Felix Fietkau [Tue, 4 Aug 2015 23:10:03 +0000 (23:10 +0000)]
ipq806x: fix freeze in PCIe code when booting with an old u-boot
Old bootloader (same ones which have DT disabled) don't perform any PCIe
initialization. The consequence is a freeze during PCIe bring-up on
these old u-boot. Same kernel with a newer bootloaders works fine as
they contain the corresponding PCIe init code.
In this change, we'll add the missing init and make sure the kernel
doesn't rely on some preexisting init to get PCIe to work. That includes
the following changes:
*GPIOs: set function & drive strength
*Clocks: add init code for aux & ref clocks
*PCIe driver: additional init of the hardware controller
Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46557
Felix Fietkau [Tue, 4 Aug 2015 23:09:55 +0000 (23:09 +0000)]
ipq806x: fix pcie pinmux naming in ipq806x dts
PCIe controller nodes are numbers 0/1/2 in the chipset dtsi file, but
the pinmux nodes are numbers 1/2/3. We'll make it consistent by changing
the pinmux numbering to match the controller's one.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46556
Felix Fietkau [Tue, 4 Aug 2015 23:09:43 +0000 (23:09 +0000)]
ipq806x: add support for non-dt enabled ap148 bootloader
Certain AP148 platforms (and derivative) use bootloaders which did not
have DT enabled.
In order to support these old platforms, we'll now make the following
modifications:
*explicitely add the memory node in the AP148 DT: this used to be added
by new u-boot through a run-time patch mechanism. We'll now add it
explicitely so it works on boots which don't support that feature. New
boots will have the node twice, the second one will be ignored.
*add the zImage generation next to the FIT image for AP148.
Other platforms using non-DT enabled bootloaders may want to leverage
this zImage code to generate their own firmare as well.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46555
Felix Fietkau [Tue, 4 Aug 2015 23:09:38 +0000 (23:09 +0000)]
ipq806x: update bleeding-edge kernel from 4.0 to 4.1
Default kernel doesn't change and stays on 3.18 for now.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46554
Felix Fietkau [Tue, 4 Aug 2015 23:09:28 +0000 (23:09 +0000)]
ar71xx: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46553
Hauke Mehrtens [Mon, 3 Aug 2015 20:49:37 +0000 (20:49 +0000)]
acx-mac80211: update git url
use URL scheme documented at http://sourceforge.net/p/forge/documentation/Git/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46552
Hauke Mehrtens [Mon, 3 Aug 2015 20:34:28 +0000 (20:34 +0000)]
cyassl: the upstream package in version 4.6.0 changed
Update the md5sum to the new version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46551
Hauke Mehrtens [Mon, 3 Aug 2015 20:33:57 +0000 (20:33 +0000)]
dnsmasq: Bump to dnsmasq2.75
Fixes a 100% cpu usage issue if using dhcp-script.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46550
Felix Fietkau [Sun, 2 Aug 2015 15:30:35 +0000 (15:30 +0000)]
ar71xx: Fix gpio_count setting for QCA953x in ath79_gpio_output_select
Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46547
Felix Fietkau [Sun, 2 Aug 2015 15:08:14 +0000 (15:08 +0000)]
ramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500
This patch fixes weak radio signal reported by nikola.georgiev
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46545
Felix Fietkau [Sun, 2 Aug 2015 15:06:54 +0000 (15:06 +0000)]
ar71xx: fix lzma-loader kernel command line passing
The generic kernel cmdline parser ignores argv[0], this caused a
regression for all lzma-loader based boards with linux 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46544
Felix Fietkau [Sun, 2 Aug 2015 07:40:12 +0000 (07:40 +0000)]
build: disable kernel stack protector support for i386/x86_64
When stack protector support is disabled in libc (always the case for
!musl), gcc assumes that it needs to use __stack_chk_guard for the stack
canary.
This causes kernel build errors, because the kernel is only set up to
handle TLS stack canaries.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46543
Felix Fietkau [Sat, 1 Aug 2015 15:13:10 +0000 (15:13 +0000)]
ar71xx: fix mr3220 device profile (#19990)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46541
Zoltan Herpai [Fri, 31 Jul 2015 21:58:31 +0000 (21:58 +0000)]
packages: uboot-sunxi: bump to 2015.07 - switch to using kernel-supplied dtc - refresh olimex-a13-som and lamobo-r1 patches (compile-tested only)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46540
Zoltan Herpai [Fri, 31 Jul 2015 21:49:37 +0000 (21:49 +0000)]
kernel: add missing symbol for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46539
Felix Fietkau [Fri, 31 Jul 2015 20:55:30 +0000 (20:55 +0000)]
bcm53xx: allow device tree to override SPI flash partition layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46538
Zoltan Herpai [Fri, 31 Jul 2015 19:50:05 +0000 (19:50 +0000)]
sunxi: fix networking on Olimex A20 Micro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46536
Felix Fietkau [Fri, 31 Jul 2015 19:49:27 +0000 (19:49 +0000)]
mac80211: restore AP scan patch
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
SVN-Revision: 46535
Felix Fietkau [Fri, 31 Jul 2015 19:49:22 +0000 (19:49 +0000)]
iw: update to version 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46534
Felix Fietkau [Fri, 31 Jul 2015 19:49:17 +0000 (19:49 +0000)]
mac80211: fix an invalid read in minstrel rate sorting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46533
Felix Fietkau [Fri, 31 Jul 2015 19:49:09 +0000 (19:49 +0000)]
mac80211: fix data alignment of management frames / beacons
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46532
Imre Kaloz [Fri, 31 Jul 2015 18:23:28 +0000 (18:23 +0000)]
mvebu: update dts files for mamba / WRT1900AC
Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 46530
Zoltan Herpai [Fri, 31 Jul 2015 18:14:59 +0000 (18:14 +0000)]
kernel: add a few missing symbols for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46529
Imre Kaloz [Fri, 31 Jul 2015 18:08:12 +0000 (18:08 +0000)]
mvebu: fix gpio config on the WRT1200AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46527
Zoltan Herpai [Fri, 31 Jul 2015 12:25:35 +0000 (12:25 +0000)]
mxs: switch to 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46526
Zoltan Herpai [Fri, 31 Jul 2015 12:22:12 +0000 (12:22 +0000)]
mxs: add support for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46525
Zoltan Herpai [Fri, 31 Jul 2015 11:58:24 +0000 (11:58 +0000)]
mxs: build sound-soc-mxs only on 3.18 for now
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46524
Zoltan Herpai [Fri, 31 Jul 2015 11:52:48 +0000 (11:52 +0000)]
packages: uboot-mxs: bump to 2015.07, refresh Duckbill patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46523
Steven Barth [Thu, 30 Jul 2015 08:53:43 +0000 (08:53 +0000)]
dnsmasq: Bump to dnsmasq2.74
Bump to dnsmasq2.74 & refresh patches to fix fuzz
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46522
Imre Kaloz [Thu, 30 Jul 2015 06:41:25 +0000 (06:41 +0000)]
mwlwifi: upgrade to latest rev with fixed firmware
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46520
Felix Fietkau [Wed, 29 Jul 2015 16:01:55 +0000 (16:01 +0000)]
mt76: update to the latest version, fixes more tx power related issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46519
Steven Barth [Wed, 29 Jul 2015 06:13:15 +0000 (06:13 +0000)]
odhcp6c: minor fixes
Better synchronize RA & DHCPv6 events
Accumulate some events to avoid flooding
Restart softwires for address and prefix changes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46518
Luka Perkov [Tue, 28 Jul 2015 21:54:44 +0000 (21:54 +0000)]
openssl: add one more mirror
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 46517
Jo-Philipp Wich [Mon, 27 Jul 2015 23:45:15 +0000 (23:45 +0000)]
sdk: provide explicit CONFIG_MODULES kconfig symbol
Extend the SDK Config.in file to explicitely declare a MODULES symbol with
the "option modules" flag set in order to prevent a kconfig segmentation fault
whenever a "depends m" dependency is encountered.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46514
Felix Fietkau [Mon, 27 Jul 2015 18:46:42 +0000 (18:46 +0000)]
mt76: update to the latest version, fixes some compile errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46513
Steven Barth [Mon, 27 Jul 2015 11:47:20 +0000 (11:47 +0000)]
firewall: fix typo in ESP rule
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46506
Hauke Mehrtens [Sun, 26 Jul 2015 15:53:44 +0000 (15:53 +0000)]
oprofile: update to 1.1.0-rc2 and make it work with musl
This brings oprifle to version 1.1.0-rc2 and adds some fixes for musl.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46505
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:59 +0000 (15:52 +0000)]
bcm53xx: update Disable MMU and Dcache during decompression
This replaces the old patch with the version from Florian.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46504
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:34 +0000 (15:52 +0000)]
kernel: add missing CONFIG_ARM_CCI400_PMU config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46503
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:17 +0000 (15:52 +0000)]
gpio-button-hotplug: handle EPROBE_DEFER and other errors
of_get_gpio_flags() could return an error like EPROBE_DEFER which was
not handled before. This patch takes the code from gpio_keys_polled.c
for error handling and also improves some other unrelated small parts.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46502
Hauke Mehrtens [Sun, 26 Jul 2015 15:51:59 +0000 (15:51 +0000)]
kernel: add CONFIG_REGMAP_MMIO config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46501
Hauke Mehrtens [Sun, 26 Jul 2015 15:51:37 +0000 (15:51 +0000)]
bcm53xx: update config
This activates CONFIG_MULTIUSER and sets the maximal number of cpus to 2.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46500
Felix Fietkau [Sun, 26 Jul 2015 13:01:43 +0000 (13:01 +0000)]
ramips: swap radio calibration data pointers for DIR-860L
Fixes low 5 GHz tx power issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46497
Felix Fietkau [Sun, 26 Jul 2015 11:42:27 +0000 (11:42 +0000)]
image: fix device variable exports for initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46496
Hauke Mehrtens [Sun, 26 Jul 2015 09:16:03 +0000 (09:16 +0000)]
kernel: add kmod-lp again
This was deactivated in r21954 because it depended on kernel 2.4, but
this module also compiles with kernel 3.18.
This closes #20199.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46495
Hauke Mehrtens [Sat, 25 Jul 2015 13:41:21 +0000 (13:41 +0000)]
kernel: cdc_ncm: Add support for moving NDP to end of NCM frame
This patch was missing for kernel 4.0 and 4.1 in r46464. I also
replaced the version in OpenWrt with the version which went upstream
into the Linux mainline kernel.
This closes #20193 and #20192
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46493
Hauke Mehrtens [Sat, 25 Jul 2015 13:40:43 +0000 (13:40 +0000)]
mac80211: do not add debugfs_create_devm_seqfile() on recent kernel versions
An #ifdef for the kernel version was missing around the header of
debugfs_create_devm_seqfile() and the LINUX_BACKPORT() was also not
done.
This closes #20181
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46492
Jonas Gorski [Sat, 25 Jul 2015 12:12:28 +0000 (12:12 +0000)]
opkg: ensure image provided feeds are available after sysupgrade
Split the opkg.conf into three files, to make it easier to support custom
feeds and configs:
* /etc/opkg.conf -> base opkg configuration
* /etc/opkg/distfeeds.conf -> default Openwrt package feeds
* /etc/opkg/customfeeds.conf -> custom package feeds
Of these three, only the base opkg.conf and the customfeeds.conf is marked
as to be kept, so that the distfeeds.conf from the image is always used.
To ease migration, a script is added that moves any feeds from /etc/opkg.conf
to /etc/opkg/customfeeds.conf on first boot.
Also ensure that any keys used for verification are also kept in upgrade.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46491
Jonas Gorski [Sat, 25 Jul 2015 12:12:11 +0000 (12:12 +0000)]
brcm63xx: switch to new image building system
Switches BCM63xx to the new IB system.
Images are generated per device definitions.
There are no changes in the produced images except for some name changes,
caused by the new IB system.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46490
Jonas Gorski [Sat, 25 Jul 2015 12:12:06 +0000 (12:12 +0000)]
brcm63xx: use new tool for generating redboot images
Simplify image/Makefile by using the new perl script for RedBoot.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46489
Jonas Gorski [Sat, 25 Jul 2015 12:12:03 +0000 (12:12 +0000)]
scripts: add tool for generating redboot scripts
This tool avoids generating the redboot script directly from Makefile, which
can get really complicated when adapting image/Makefile to the new IB system.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46488
Jonas Gorski [Sat, 25 Jul 2015 09:55:32 +0000 (09:55 +0000)]
kmod-regmap: make regmap-mmio user selectable
REGMAP_MMIO is a hidden symbol, so it cannot be directly selected. If nothing
selects it, it will fail the build with:
ERROR: module '/store/buildbot/slave/slave/rb532/build/build_dir/target-mipsel_mips32_musl-1.1.10/linux-rb532/linux-3.18.19/drivers/base/regmap/regmap-mmio.ko' is missing.
make[2]: *** [/store/buildbot/slave/slave/rb532/build/bin/rb532/packages/base/kmod-regmap_3.18.19-1_rb532.ipk] Error 1
Fix this by adding a description to allow selecting it manually.
Fixes: r46451 ("kmod-regmap: enable MMIO support")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46485
Steven Barth [Fri, 24 Jul 2015 22:26:44 +0000 (22:26 +0000)]
mbedtls: package version 2.0, make polarssl compatible
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46484
Felix Fietkau [Fri, 24 Jul 2015 15:36:08 +0000 (15:36 +0000)]
kernel: remove kmod-crypto-aes, AES crypto support is always built into the kernel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46483
Felix Fietkau [Fri, 24 Jul 2015 15:36:02 +0000 (15:36 +0000)]
kernel: fix oprofile performance counter interrupt handling on mips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46482
Felix Fietkau [Fri, 24 Jul 2015 15:35:55 +0000 (15:35 +0000)]
musl: update to latest git version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46481
Steven Barth [Fri, 24 Jul 2015 13:51:45 +0000 (13:51 +0000)]
fortify-headers: update to 0.7
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46480
Steven Barth [Fri, 24 Jul 2015 13:51:43 +0000 (13:51 +0000)]
odhcpd: fix RA lifetimes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46479
Steven Barth [Fri, 24 Jul 2015 10:00:45 +0000 (10:00 +0000)]
firewall: comply with REC-22, REC-24 of RFC 6092
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46478
John Crispin [Fri, 24 Jul 2015 09:12:21 +0000 (09:12 +0000)]
ramips: add additional uarts to mt7628.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46477
John Crispin [Fri, 24 Jul 2015 09:12:16 +0000 (09:12 +0000)]
ramips: make sd driver depend on mt7688
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46476
John Crispin [Fri, 24 Jul 2015 09:12:10 +0000 (09:12 +0000)]
ramips: add CD polling to sd driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46475
John Crispin [Fri, 24 Jul 2015 09:12:02 +0000 (09:12 +0000)]
ramips: various mt7688 pinmux fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46474
John Crispin [Fri, 24 Jul 2015 09:11:56 +0000 (09:11 +0000)]
ramips: add subtarget for mt7688
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46473
John Crispin [Fri, 24 Jul 2015 09:11:42 +0000 (09:11 +0000)]
ramips: add clock strecthing support to i2c driver
fixes #19816
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46472
John Crispin [Fri, 24 Jul 2015 09:11:35 +0000 (09:11 +0000)]
buttons: make all button handler scripts return 0
this is required by the new button timeout feature
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46471
John Crispin [Fri, 24 Jul 2015 09:11:29 +0000 (09:11 +0000)]
bzip2: add host build
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46470
John Crispin [Fri, 24 Jul 2015 09:11:24 +0000 (09:11 +0000)]
firmware-utils mktplinkfw: print amount of exceeding bytes
This is very useful for trimming images towards 4 MiB flash size.
Signed-off-by: Stephan Maka <stephan@spaceboyz.net>
SVN-Revision: 46469
John Crispin [Fri, 24 Jul 2015 09:11:17 +0000 (09:11 +0000)]
mac80211: Clarify ath9k & ath10k debug selection
Ath debug mode applies to ath10k as well as ath9k.
Update Makefile help text to clarify.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46468
John Crispin [Fri, 24 Jul 2015 09:11:06 +0000 (09:11 +0000)]
dnsmasq: add some missing files to the jail
found with strace, not sure we got all of them though
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 46467
John Crispin [Fri, 24 Jul 2015 09:11:00 +0000 (09:11 +0000)]
base-files: fix /tmp/.jail permissions
We need a+x rights on the path to the root of the jails
so we can use users other than root (like nobody)
This partly fixes jailed dnsmasq
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 46466
John Crispin [Fri, 24 Jul 2015 09:10:55 +0000 (09:10 +0000)]
procd: update to latest git HEAD
fixes http://patchwork.ozlabs.org/patch/497899/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46465
John Crispin [Fri, 24 Jul 2015 09:10:47 +0000 (09:10 +0000)]
generic: cdc_ncm: Add support for moving NDP to end of NCM frame
NCM specs are not actually mandating a specific position in the frame for
the NDP (Network Datagram Pointer). However, some Huawei devices will
ignore our aggregates if it is not placed after the datagrams it points
to. Add support for doing just this, in a per-device configurable way.
While at it, update NCM subdrivers, disabling this functionality in all of
them, except in huawei_cdc_ncm where it is enabled instead.
We aren't making any distinction between different Huawei NCM devices,
based on what the vendor driver does. Standard NCM devices are left
unaffected: if they are compliant, they should be always usable, still
stay on the safe side.
This change has been tested and working with a Huawei E3131 device (which
works regardless of NDP position) and an E3372 device (which mandates NDP
to be after indexed datagrams).
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 46464
John Crispin [Fri, 24 Jul 2015 09:10:41 +0000 (09:10 +0000)]
generic: Add missing symbols when tracing is enabled
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46463
John Crispin [Fri, 24 Jul 2015 09:10:19 +0000 (09:10 +0000)]
generic: add missing symbol
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46462
John Crispin [Fri, 24 Jul 2015 09:10:14 +0000 (09:10 +0000)]
brcm2708: add kmod-sound-soc-bcm2708-i2s support
This adds support for I2S SoC Audio modules.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46461
John Crispin [Fri, 24 Jul 2015 09:10:05 +0000 (09:10 +0000)]
brcm2708: add kmod-video-bcm2835 support
This adds BCM2835 camera interface driver as a kernel module.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46460
John Crispin [Fri, 24 Jul 2015 09:10:00 +0000 (09:10 +0000)]
ar71xx: Allow to use ath79_gpio_output_select on QCA955x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46459
John Crispin [Fri, 24 Jul 2015 09:09:49 +0000 (09:09 +0000)]
ar71xx: add support for Onion Omega
This patch adds support for the Onion Omega.
https://onion.io/omega
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>
SVN-Revision: 46458
John Crispin [Fri, 24 Jul 2015 09:09:42 +0000 (09:09 +0000)]
ar71xx: Add support for AP147-010 reference board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46457
John Crispin [Fri, 24 Jul 2015 09:09:31 +0000 (09:09 +0000)]
ar71xx: Add support for PCIe on QCA953x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46456
John Crispin [Fri, 24 Jul 2015 09:09:27 +0000 (09:09 +0000)]
ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2
There are a few NETGEAR devices which don't terminate the model name in the
ART with a NUL byte, at least some NETGEAR WNDR3700v2. The current awk
expression doesn't match 0xFF bytes, so AR71XX_MODEL contains lots of
trailing 0xFF garbage in this case.
Fix this by matching for the first non-printable character and explicitly
setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will
definitely work like this, even when awk supports locales and LANG is set).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46455
John Crispin [Fri, 24 Jul 2015 09:09:22 +0000 (09:09 +0000)]
ramips: add support for STORYLiNK SAP-G3200U3
STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN.
It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.
Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons
* ethernet switch and USB diag LEDs
* UART
* GPIOs
Tested and not working:
* LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?)
* failsafe mode (known problem, needs workaround like other MTK based devices)
More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46454
John Crispin [Fri, 24 Jul 2015 09:09:07 +0000 (09:09 +0000)]
lantiq: Silence the PCIe error interrupt printk also in 4.1
This ports
9e2a7b779e6f0914395da3657b00f0ac00209bfd to the 4.1 patches.
I forgot this when preparing the initial 4.1 patch.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46453
John Crispin [Fri, 24 Jul 2015 09:09:02 +0000 (09:09 +0000)]
lantiq: Fix ifxos driver on linux 4.1
request_mem_region returns NULL when requesting the region failed, and
a valid pointer when it was successful. Currently the condition is
inverted.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46452
John Crispin [Fri, 24 Jul 2015 09:08:57 +0000 (09:08 +0000)]
kmod-regmap: enable MMIO support
This adds MMIO support for kmod-regmap.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46451
projects / openwrt / staging / hauke.git / log