mvebu: use PHY LED trigger for speed LEDs on FortiGate 50E

Use <mdio>:<addr>:<speed> trigger instead of netdev(link) trigger for
Fortinet FortiGate 50E, to indicate link speed on the each phys.

1000 Mbps: Green
100 Mbps : Amber
10 Mbps  : (turn off)

Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>

mvebu: cortexa9: enable Ethernet PHY LED trigger

To use <mdio>:<addr>:<speed> trigger for LEDs, enable PHY LED trigger
(CONFIG_LED_TRIGGER_PHY).

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>

download: create immutable subversion checkout archive

On each generation of the archive check sum will differ, because when
checking out subversion repository, current date is used for directories
creation. Force tar to assign creation date of the last revision for all
items inside archive.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>

scripts/gen_image_generic.sh: allow passing in partition offset

Allow passing in an optional offset (PARTOFFSET) for the first partition.
If not specified this will default to 256K (512 blocks) as it has before.

For example if you want to start partition data at a 16M offset instead
of 256K, specify 'PARTOFFSET=16M'.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

octeontx: kernel: add USB storage boot support

Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass
Storage device.

This increases the kernel Image by 66KiB

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: kernel: add USB storage boot support

Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass
Storage device.

This adds 23KiB to the compressed kernel size

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

nu801: add kmod-leds-uleds to MR26 + MR18

support for MR18 and MR26 was developped before
the userspace nu801 was integrated with x86's
MX100 into OpenWrt. The initial nu801 + kmod-leds-uleds
caused build-bot errors.

The solution that worked for the MX100 was to include
the kmod-leds-uleds to the device platform module.
Thankfully, the MR26 and MR18 can just add the uleds
package to the DEVICE_PACKAGES variable.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

libxml2: update to 2.11.3

Changelog:
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.10.4
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.0
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.1
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.2
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.3

Fixes: CVE-2023-28484 CVE-2023-29469
Signed-off-by: Nick Hainke <vincent@systemli.org>

ramips: rename to D-Team Newifi D2 and Lenovo Newifi D1

Rename Newifi D2 to D-Team Newifi D2, and Newifi D1 to Lenovo Newifi D1.
Let's not make naming exceptions because of marketing whims.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

ramips: add support for TOZED ZLT S12 PRO

The TOZED ZLT S12 PRO is an AC1200 router featuring 4 Ethernet ports with a
TOZED TL70-C cellular modem which supports the NCM mode.

The stock firmware does SIM locking on the modem by stopping dialing when a
different PLMN is detected. This is not the case on OpenWrt.

Specifications:
- CPU: MediaTek MT7621AT
- RAM: 256MB DDR3
- NOR Flash: MX25L12833FM2I 16MB SPI Flash
- Wi-Fi 2.4Ghz: MT7603E
- Wi-Fi 5Ghz: MT7612E
- Switch: MT7530 4x 1Gbit Ports
- WWAN: Unisoc SL8563 based TOZED TL70-C LTE CAT6 cellular modem
- USB: 1x optional USB2.0 external port
- Switches/Buttons: WPS, Reset, Power Switch
- LEDs: Power, Wi-Fi, Data, Signal 1-5, Phone

Installation and TFTP Recovery:
- Connect to serial console.
- Boot initramfs image by choosing option 1 when U-Boot prompts.
- Install sysupgrade image via OpenWrt.

Serial Pins:
Located at the bottom right when looking from the front, right under the
Reset/WPS buttons. The pinout from the left is:
- RX
- GND
- TX
Baudrate is 115200.

When connecting from a powered off state, disconnect RX as it blocks the
boot process.

Link: http://www.sztozed.com/en/contents/58/84.html
Co-developed-by: Andre Cruz <me@1conan.com>
Signed-off-by: Andre Cruz <me@1conan.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

comgt-ncm: add support for UNISOC SL8563 based TOZED TL70-C

TOZED TL70-C is an LTE CAT6 cellular modem based on UNISOC SL8563. UNISOC
was formerly called Spreadtrum hence the manufacturer name detected on the
modem is spreadtrum.

The connect and disconnect commands bring up and down the usb0 interface.
They are Base64 encoded as that's what the AT command accepts. The modem
can do up to 4 APNs by bringing the USB interfaces, usb0 to usb3, up.

Setting the USB interfaces up:

connmanctl ndisdial AT^NDISDUN="usb0",1,1
connmanctl ndisdial AT^NDISDUN="usb1",1,2
connmanctl ndisdial AT^NDISDUN="usb2",1,3
connmanctl ndisdial AT^NDISDUN="usb3",1,4

Setting the USB interfaces down:

connmanctl ndisdial AT^NDISDUN="usb0",0,1
connmanctl ndisdial AT^NDISDUN="usb1",0,2
connmanctl ndisdial AT^NDISDUN="usb2",0,3
connmanctl ndisdial AT^NDISDUN="usb3",0,4

Co-developed-by: Andre Cruz <me@1conan.com>
Signed-off-by: Andre Cruz <me@1conan.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

base-files: add protocol ncm support for ucidef_set_interface()

Make it possible to set up a default network (interface) for devices with
cellular modems using NCM.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

wwan: add Medion S4222 usb lte stick

add description for medion usb lte webstick

Signed-off-by: Joe Cooper <highjagger+github@gmail.com>
[bump PKG_RELEASE]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ucode: update to the latest version

8f78aff2cb68 ubus: support multiple call return values
51f4dba67313 ucode: also link libresolv if ns_initparse() is not found
5c7d07773a59 uci: fix ctx.commit() without arguments
5163867269fc Merge pull request #148 from jow-/uci-fix-commit

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

mediatek: remove left-over reference to make_gl_metadata.py

When adding support for the GL.iNet GL-MT3000 a reference to the
non-existent make_gl_metadata.py script was accidentally added.
Remove it, flashing from vendor firmware also works fine without that.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

ramips: Fix Wireless Frequencies for HYC-G920

Fix wireless frequencies to show correct wireless interfaces.

Signed-off-by: Muhammad AL-Qadhy <m.ismael@gmail.com>

px5g-wolfssl: replace COMMITCOUNT with real PKG_RELEASE

Similar to the AUTORELEASE conversion process.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

treewide: replace AUTORELEASE with real PKG_RELEASE

Based on Paul Fertser <fercerpav@gmail.com>'s guidance:
Change AUTORELEASE in rules.mk to:
```
AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile))
```

then update all affected packages by:
```
for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';);
do
make package/$i/clean
done
```

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

firmware-utils: update to latest HEAD

02cdbc6 tplink-safeloader: add Archer AX23 v1.2 (RU)
de36fa6 tplink-safeloader: add AX23 support-list entry
5f6fefd tplink-safeloader: order AX23 support-list
25131d6 tplink-safeloader: add Archer C59 / C60 CA ragion code

Signed-off-by: David Bauer <mail@david-bauer.net>

libselinux: update to 3.5

Switch from libpcre to libpcre2. While working on it remove the double
defined HOST_BUILD_DEPENDS section.

Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
[depend on libpcre2]
Signed-off-by: Nick Hainke <vincent@systemli.org>

secilc: update to 3.5

Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>

policycoreutils: update to 3.5

Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>

libsemanage: update to 3.5

Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>

libsepol: update to 3.5

Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>

checkpolicy: update to 3.5

Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>

pcre: move package to packages feed

With the update of selinux no package depends anymore on pcre in the
base repository. Move it to packages feed.

Signed-off-by: Nick Hainke <vincent@systemli.org>

pcre2: import pcre2 from packages feed

pcre2 is needed by newer selinux versions, so it needs to be in the base
repository.

Signed-off-by: Nick Hainke <vincent@systemli.org>

ci: fix check kernel patches job

Currently the check fails due to the following error:

 warning: Not a git repository. Use --no-index to compare two paths outside a working tree
 usage: git diff --no-index [<options>] <path> <path>

Thats likely caused by commit 1cb8cdbf0723 ("ci: use new buildbot worker
images with Debian 11") which contains a patched Git version with CVE
security fixes introduced in DLA-3239-2:

 Multiple issues were found in Git, a distributed revision control
 system. An attacker may cause other local users into executing arbitrary
 commands, leak information from the local filesystem, and bypass
 restricted shell.

 Note: Due to new security checks, access to repositories owned and
 accessed by different local users may now be rejected by Git; in case
 changing ownership is not practical, git displays a way to bypass these
 checks using the new "safe.directory" configuration entry.

So lets opt-out of this new behavior by setting `safe.directory=*` and
thus force Git to consider all Git repositories as safe regardless of
their owner, since we need to trust those sources anyway and it should
be likely more robust solution, then fiddling with filesystem
permissions.

Fixes: 1cb8cdbf0723 ("ci: use new buildbot worker images with Debian 11")
References: https://www.debian.org/lts/security/2022/dla-3239-2
Signed-off-by: Petr Štetiar <ynezz@true.cz>

mediatek: update patch add PWM support for MT7981

Update patch with version submitted upstream.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: add support for the GL.iNet GL-MT3000

The MT-3000 is a pocket-sized Wi-Fi 6 router based on MediaTek MT7981.

Specification:
 - SoC: MediaTek MT7981B
 - CPU: 2x 1.3 GHz Cortex-A53
 - Flash: 256 MiB Macronix SPI NAND
 - RAM: 512 MiB Nanya DDR4
 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN)
 - Ethernet:
    - 1x 10/100/1000 Mbps built-in PHY (LAN)
    - 1x 10/100/1000/2500 Mbps MaxLinear GPY211 PHY (WAN)
 - USB 3.0 port
 - Buttons: 1 button, 1 switch
 - LEDs: 1x light-blue, 1x warm-white
 - Serial console: internal 4-pin header, 115200 8n1
 - PWM controlled fan with tacho
 - Power: 5 VDC, 3 A (USB Type-C)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mac80211: fix mt7601u firmware path and refresh patches

Import patch fixing the updated firmware path of mt7601u.bin.
Refresh patches while at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: add support for Cudy WR3000 v1

Hardware
--------
MediaTek MT7981 WiSoC
256MB DDR3 RAM
16MB SPI-NOR (XMC XM25QH128C)
MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
UART: 115200 8N1 3.3V
      [LEDS] VCC-GND-RX-TX [ETH]
      Header is located below the heatsink

Case
----
Unscrew the 4 bottom screws. Remove the top of the case by inserting a
small screwdriver into the ventilation holes and lift the top cover.

This works best by beginning near the ETH-ports. The top is clipped on
the front near the LEDs with two plastic clips. The back has a single
clip in the middle. Start at one of the back edges.

MAC-Addresses
-------------
80:AF:CA:00:F9:C6 LAN
80:AF:CA:00:F9:C7 WAN
80:AF:CA:00:F9:C6 W2
82:AF:CA:30:F9:C6 W5

Installation
------------

1. Connect to the serial port as described in the "Hardware" section.

2. Power on the device. Keep pressing the "0" key to enter the U-Boot
   shell.

3. Download the OpenWrt initramfs image. Place it on an TFTP server
   connected to the Cudy LAN ports. Make sure the server is reachable at
   192.168.1.2. Rename the image to "cudy3000.bin"

4. Download and boot the OpenWrt initramfs image.

   $ tftpboot 0x46000000 cudy3000.bin; bootm 0x46000000

5. Transfer the OpenWrt sysupgrade image to the device using scp.
   Install with sysupgrade.

Note: Cudy does not yet provide a image for disabling their
signature-protection. This has happened in the past. Make sure to check
the wiki for a possible easier installation method.

Signed-off-by: David Bauer <mail@david-bauer.net>

iwinfo: update to latest HEAD

c9f5c3f devices: add MediaTek MT7981 WMAC compatible
b3888b2 devices: add compatible strings for Ralink WiSoCs

Signed-off-by: David Bauer <mail@david-bauer.net>

mt76: add MT7981 firmware packages

Package the firmware required for MT7981 to bring up the radio.

Signed-off-by: David Bauer <mail@david-bauer.net>

mt76: update to latest HEAD

969b7b5e wifi: mt76: mt7915: add support for MT7981
cddbd796 linux-firmware: add firmware for MT7981
c69b0239 linux-firmware: update firmware for MT7921 WiFi device
c85a0f2f mt7921: remove duplicated line
0cbe1376 wifi: mt76: mt7915: drop redundant prefix of mt7915_txpower_puts()
b490c6c7 wifi: mt76: fix 6GHz high channel not be scanned
db5a8f70 wifi: mt76: move shared mac definitions in mt76_connac2_mac.h
3963ab2f wifi: mt76: mt7921: get rid of eeprom.h
c09f943d wifi: mt76: add mt76_connac_gen_ppe_thresh utility routine
28ea992c wifi: mt76: get rid of unused sta_ps callbacks
2936b036 wifi: mt76: add mt76_connac_irq_enable utility routine
482d2a76 wifi: mt76: move irq_tasklet in mt76_dev struct
88d1b002 wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu support
577fbd47 linux-firmware: update firmware for MT7916
32be54b5 linux-firmware: update firmware for MT7921 WiFi device
4e2fad04 linux-firmware: update firmware for MT7922 WiFi device
f8793b1a linux-firmware: update firmware for MT7921 WiFi device
91e6ad2a linux-firmware: update firmware for MT7921 WiFi device
b7a538a3 linux-firmware: update firmware for MT7922 WiFi device
e3b5a8cc wifi: mt76: mt7996: enable configured beacon tx rate
a18bf481 wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE support
f863beed wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support
aedc10d5 wifi: mt76: connac: add nss calculation into mt76_connac2_mac_tx_rate_val()
84a227e5 wifi: mt76: connac: fix txd multicast rate setting
a0657180 wifi: mt76: mt7921e: stop chip reset worker in unregister hook
fd895347 wifi: mt76: mt7921e: improve reliability of dma reset
c9fa8d64 wifi: mt76: mt7921: fix missing unwind goto in `mt7921u_probe`
c1baa812 mt76: mt7921: fix kernel panic by accessing unallocated eeprom.data
ca180889 wifi: mt76: move mcu_uni_event and mcu_reg_event in common code
98fbca7a wifi: mt76: mt7996: enable coredump support
be1ff24e wifi: mt76: mt7996: add full system reset knobs into debugfs
b7a6c0ef wifi: mt76: mt7996: enable full system reset support
46f28e75 wifi: mt76: mt7921: enable p2p support
6a7e41c3 wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unset
084e6de7 wifi: mt76: mt7921: use driver flags rather than mac80211 flags to mcu
c66e7a1a wifi: mt76: mt7921: introduce mt7921_get_mac80211_ops utility routine
821caac5 wifi: mt76: mt7996: fix eeprom tx path bitfields
9ae2569b wifi: mt76: mt7996: remove mt7996_mcu_set_pm()
3244d176 wifi: mt76: mt7996: init mpdu density cap
210a558a wifi: mt76: mt7996: fix pointer calculation in ie countdown event
207c92bb wifi: mt76: mt7996: remove unused eeprom band selection
16a24667 wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queue
d39bb7c8 wifi: mt76: mt7996: remove mt7996_mcu_beacon_check_caps()
4046b591 wifi: mt76: mt7915: remove mt7915_mcu_beacon_check_caps()
d63cb85c wifi: mt76: add missing locking to protect against concurrent rx/status calls
22f1b777 mt76: adjust for ieee80211_is_bufferable_mmpdu API change
8ecf551c wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported drivers
efa44cb5 wifi: mt76: ignore key disable commands
56f0cd4d wifi: mt76: mt7915 add tc offloading support
021ded36 tools: Fix compile error with glibc

Signed-off-by: David Bauer <mail@david-bauer.net>

mediatek: fix typo

Signed-off-by: David Bauer <mail@david-bauer.net>

bmips: improve kernel patches

Add missing patch headers and regenerate the ones that contain an obsolete
patch header.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

mdadm: fix compilation with musl 1.2.4

_LARGEFILE64_SOURCE has to be defined in the source, or CFLAGS can be used
to pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.

Fixes error in the form of:
restripe.c: In function 'restore_stripes':
restripe.c:758:43: error: 'off64_t' undeclared (first use in this function); did you mean 'off_t'?
  758 |                                          (off64_t)read_offset) {
      |                                           ^~~~~~~
      |                                           off_t
restripe.c:758:43: note: each undeclared identifier is reported only once for each function it appears in
restripe.c:758:51: error: expected ')' before 'read_offset'
  758 |                                          (off64_t)read_offset) {
      |                                                   ^~~~~~~~~~~
      |                                                   )
restripe.c:757:36: note: to match this '('
  757 |                                 if (lseek64(source, read_offset, 0) !=
      |                                    ^
make[3]: *** [Makefile:193: restripe.o] Error 1

Fixes: fff878c5bcda ("toolchain/musl: update to 1.2.4")
Signed-off-by: Nick Hainke <vincent@systemli.org>

e2fsprogs: fix compilation with musl 1.2.4

musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces and
autotools failed to check the lseek64 function.

Force enable ac_cv_func_lseek64 to workaround it.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

f2fs-tools: fix compilation with musl 1.2.4

musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces and
autotools failed to check the lseek64 function.

Force enable ac_cv_func_lseek64 to workaround it.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

ath79: add support for MikroTik RB951Ui-2HnD

MikroTik RB951Ui-2HnD is a wireless SOHO router that was previously
supported by the ar71xx target, see commit d19b868b12 ("ar71xx: Add
support for MikroTik RB951Ui-2HnD").

Specifications
--------------

  - SoC: Atheros AR9344 (600 MHz)
  - RAM: 128 MB (2x 64 MB)
  - Storage: 128 MB NAND flash (various manufacturers)
  - Ethernet: Atheros AR8229 switch, 5x 10/100 Mbit/s
      - 1x PoE in (port 1, 8-30 V input)
      - 1x PoE out (port 5, 500 mA output)
  - Wireless: Atheros AR9340 (802.11b/g/n)
  - USB: 2.0 (1A)
  - 9x LED:
      - 1x power (green, not configurable)
      - 1x user (green)
      - 5x FE ports (green)
      - 1x wireless (green)
      - 1x PoE out (red)
  - 1x button (restart)

See https://mikrotik.com/product/RB951Ui-2HnD for more details.

Flashing
--------

TFTP boot initramfs image and then perform sysupgrade.  Follow
common MikroTik procedures at https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Michał Kępień <openwrt@kempniu.pl>

libbsd: fix compilation with musl 1.2.4

musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so
just having _GNU_SOURCE defined is not enough anymore.

_LARGEFILE64_SOURCE has to be defined in the source, or CFLAGS can be used
to pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.

Fixes: fff878c5bcda ("toolchain/musl: update to 1.2.4")
Signed-off-by: Robert Marko <robimarko@gmail.com>

linux-firmware: move firmware file for mt7601u

The firmware file for mt7601u (MediaTek MT7601U Wireless MACs) has
been moved to the mediatek/ folder by commit
 8451c2b1 mt76xx: Move the old Mediatek WiFi firmware to mediatek

Address this by updating the location of the firmware file in our
linux-firmware Makefile generating the mt7601u-firmware package.

All other MediaTek Wi-Fi firmware files are supplied by OpenWrt's
own repository rather than being taken from linux-firmware.

Fixes: d53fe5d9ce ("linux-firmware: update to 20230515")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

linux-firmware: update to 20230515

Package offloading firmware for MT7981 which has been added to
linux-firmware recently and became available in this release.

Changes since 20230515:
51290942 Merge branch 'main' of https://github.com/CirrusLogic/linux-firmware
cc628d65 cirrus: Add firmware and tuning files for HP G10 series laptops
905d3265 linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
d1962891 WHENCE: Cleanup Realtek BT firmware provenance
6569484e linux-firmware: update firmware for MT7922 WiFi device
7d639e80 cnm: update chips&media wave521c firmware.
b8a56bf2 cirrus: Add firmware and tuning files for Lenovo ThinkPad P1 Gen 6
6c9e0ed5 check_whence: error on directory listed as File
05183b7b check_whence: error on duplicate file entries
c4423c91 WHENCE: comment out duplicate MediaTek firmware
2bc50f50 Merge branch 'mtl_guc_70.6.6' of git://anongit.freedesktop.org/drm/drm-firmware
192ee6d1 i915: Add GuC v70.6.6 for MTL
312c61f5 amdgpu: update DCN 3.1.6 DMCUB firmware
0061a2dd rtl_bt: Update RTL8852B BT USB firmware to 0xDBC6_B20F
1de22a39 rtl_bt: Update RTL8761B BT USB firmware to 0xDFC6_D922
dee0d4cd rtl_bt: Update RTL8761B BT UART firmware to 0x9DC6_D922
fab14965 Group all Conexant V4L devices together
e88bdbe4 rtl_nic: update firmware of USB devices
6536a964 linux-firmware: Update firmware file for Intel Bluetooth AX200
2ca17876 linux-firmware: Update firmware file for Intel Bluetooth AX201
7610656f linux-firmware: Update firmware file for Intel Bluetooth AX203
209ba083 linux-firmware: Update firmware file for Intel Bluetooth AX203
a2739f05 linux-firmware: Update firmware file for Intel Bluetooth AX211
1ee587d5 linux-firmware: Update firmware file for Intel Bluetooth AX211
40ba7eee linux-firmware: Update firmware file for Intel Bluetooth AX210
bcbbf6bf linux-firmware: update firmware for MT7981
507ee862 Merge branch 'main' of github.com:sampathnimmmala/bt_firmware
2c6be1a4 qca: Update firmware files for BT chip WCN6750
8451c2b1 mt76xx: Move the old Mediatek WiFi firmware to mediatek
53e48f93 rtl_bt: Add firmware and config files for RTL8851B
69143e8e linux-firmware: Update AMD cpu microcode
1c942e46 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
45530bcb linux-firmware: add firmware for MT7981
0d02ce69 linux-firmware: update firmware for MT7921 WiFi device
2deb2d30 linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
9fdb844b linux-firmware: update qat firmware
74afc00d linux-firmware: Add firmware for Cirrus CS35L41 on Lenovo Laptops
86da2ac9 Merge https://github.com/pkshih/linux-firmware
5d0d24b3 linux-firmware: update firmware for MT7916
0aea9cdf Merge branch 'ath10k-20230405' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
9f7502f1 rtw89: 8852b: update format-1 fw to v0.29.29.1
b9c8e9f7 rtw89: 8852c: update fw to v0.27.56.13
d1dc3048 ath11k: WCN6855 hw2.0: update board-2.bin
8115bd84 ath11k: WCN6750 hw1.0: update to WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1
7d2ab030 ath11k: QCN9074 hw1.0: update to WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
b58b0869 ath11k: IPQ8074 hw2.0: update to WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
0747362d ath11k: IPQ8074 hw2.0: update board-2.bin
7262bd5d ath11k: IPQ6018 hw1.0: update to WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
aa98ffa3 ath11k: IPQ6018 hw1.0: update board-2.bin
2c67adc9 ath10k: QCA99X0 hw2.0: update board-2.bin
a5dcb441 ath10k: QCA9984 hw1.0: update board-2.bin
d0731d40 ath10k: QCA9888 hw2.0: update board-2.bin
e13fedda ath10k: QCA6174 hw3.0: update board-2.bin
465dc284 ath10k: QCA4019 hw1.0: update board-2.bin
2e92a49f nvidia: update Tu10x and Tu11x signed firmware to support newer Turing HW
00258371 linux-firmware: update firmware for MT7922 WiFi device
33d8bf79 linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
87bb6c9a Merge tag 'iwlwifi-fw-2023-03-30' of http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
956c1163 Merge branch 'mlimonci/update-dcn-3-1-4' of https://gitlab.freedesktop.org/superm1/linux-firmware
717e62eb linux-firmware: Amphion: Update vpu firmware
7bce2920 Merge https://github.com/pkshih/linux-firmware
78a8782a iwlwifi: add new FWs from core78-32 release
a91d0e78 iwlwifi: update 9000-family firmwares to core78-32
9ee24ce0 amdgpu: Update SDMA 6.0.1 firmware
7df2a1ae amdgpu: Add PSP 13.0.11 firmware
f098803d amdgpu: Update PSP 13.0.4 firmware
2cc9a4d0 amdgpu: Update GC 11.0.1 firmware
eb13e669 amdgpu: Update DCN 3.1.4 firmware
898b7def amdgpu: Add GC 11.0.4 firmware
e40a5b63 rtw88: 8822c: Update normal firmware to v9.9.15
bcdcfbcf linux-firmware: Update firmware file for Intel Bluetooth AX101
b422cdd6 linux-firmware: Update firmware file for Intel Bluetooth 9462
3e4c3b8d linux-firmware: Update firmware file for Intel Bluetooth 9462
6fcdb8e7 linux-firmware: Update firmware file for Intel Bluetooth 9560
46384d1c linux-firmware: Update firmware file for Intel Bluetooth 9560
1d797f86 linux-firmware: Update firmware file for Intel Bluetooth AX203
53c086b3 linux-firmware: Update firmware file for Intel Bluetooth AX203
9cc9745d linux-firmware: Update firmware file for Intel Bluetooth AX211
45319be8 linux-firmware: Update firmware file for Intel Bluetooth AX211
61d58194 linux-firmware: Update firmware file for Intel Bluetooth AX210
7f490a9a Merge branch 'dmc-adlp_2.19-mtl_2.12' of git://anongit.freedesktop.org/drm/drm-firmware
dcac1477 Merge branch 'mtk-20230315' of https://github.com/tinghan-shen/linux_fw_scp
1f82dd25 linux-firmware: add firmware files for NXP BT chipsets
49ad74b3 Merge https://github.com/pkshih/linux-firmware
2c07f017 rtw89: 8852b: update format-1 fw to v0.29.29.0
b50cf920 rtw89: 8852b: add format-1 fw v0.29.26.0
416a66ca rtw89: 8852b: rollback firmware to v0.27.32.1
a18a444b i915: Update MTL DMC to v2.12
4ee236db i915: Update ADLP DMC to v2.19
d0997ff6 mediatek: Update mt8192/mt8195 SCP firmware to support MM21 and MT21
c761dbe8 Merge tag 'iwlwifi-fw-2023-03-13' of http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
5bc279fb iwlwifi: update core69 and core72 firmwares for So device

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: mtk_eth_soc: don't crash if WO firmware is missing

Import patch to prevent crashes in case WO firmware is missing on devices
with only a single frontend (eg. MT7981+MT7976).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: add support for wireless offloading on MT7981

Load appropriate firmware for wireless offloading on MT7981.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

ci: use new buildbot worker images with Debian 11

Debian 10 LTS support ends on 6/2024, so it makes no sense to use it as
a base for 23.05 release, so lets switch to Debian 11 which should've
LTS support till 6/2026.

References: https://github.com/openwrt/buildbot/commit/f2744543fa8027117b254ba2f4fa4366149d5bfb
Signed-off-by: Petr Štetiar <ynezz@true.cz>

libselinux: fix compilation with musl 1.2.4

musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so
just having _GNU_SOURCE defined is not enough anymore.

_LARGEFILE64_SOURCE has to be defined in the source, or CFLAGS can be used
to pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.

Signed-off-by: Robert Marko <robimarko@gmail.com>

toolchain/musl: update to 1.2.4

Release notes:

new features:
- large dns record lookups via tcp fallback
- new getaddrinfo EAI_NODATA result to distinguish NODATA/NxDomain
- support for new RELR compressed format for relative relocations
- sysconf keys for querying signal stack size requirements
- real vfork on riscv64

performance:
- mallocng no longer uses MADV_FREE (high performance cost, little gain)
- vdso clock_gettime is supported once again on 32-bit arm

compatibility:
- gethostbyname family now distinguishes NO_DATA from HOST_NOT_FOUND
- res_send now works with caller-provided edns0 queries
- arpa/nameser.h RR types list is now up-to-date
- previously-missing POSIX confstr keys have been added
- mntent interfaces now accept missing fields
- alt signal stack, if any, is now used for internal signals
- the LFS64 macros are no longer exposed without _LARGEFILE64_SOURCE
- memmem (POSIX-future) is now exposed in default feature profile
- pthread_atfork now admits calls from an application-provided malloc
- debugger tracking of shared libraries now works on MIPS PIE binaries
- sendmsg now supports up to SCM_MAX_FD fds in SCM_RIGHTS messages

bugs fixed:
- gethostbyname[2]_r wrongly returned nonzero (error) on negative result
- parallel v4/v6 address queries could fail on query id collisions
- spurious getaddrinfo/AI_ADDRCONFIG failures due to errno clobbering
- dns search domains ending in dot (including lone dot) broke lookups
- ipv6 servers in resolv.conf broke lookups on systems with v6 disabled
- systems with bindv6only failed to query both v4 and v6 nameservers
- res_mkquery mishandled consecutive final dots in name
- res_send could malfunction for very small answer buffer sizes
- resolver dns backend accepted answers with wrong (A vs AAAA) RR type
- getservbyport_r returned junk or ENOENT (vs ERANGE) on buffer size errors
- dns result parsing of malformed responses could process uninitialized data
- freopen didn't reset stream orientation (byte/wide) & encoding rule
- fwprintf didn't print most fields on open_wmemstream FILEs
- wide printf %lc ignored field width
- wide printf erroneously processed %n after encoding errors
- use of wide printf %9$ argument slot overflowed undersized buffer
- swprintf malfunctioned on nul character in output
- strverscmp ordered digit sequences vs nondigits incorrectly
- timer_create/SIGEV_THREAD failure leaked the thread
- semaphores were subject to missed-wake under certain usage patterns
- several possible rare deadlocks with lock handling at thread exit
- several possible rare deadlocks with aio and multithreaded fork
- dynamic linker relro processing was broken on archs w/variable pagesize
- async cancellation could run cancellation handlers in invalid context
- pthread_detach was wrongly a cancellation point in rare race code path
- use-after-close/double-close errors in mq_notify error paths
- mq_notify event thread wrongly ran with signals unmasked
- wcs{,n}cmp, wmemcmp returned wrong results when difference overflowed
- accept4, pipe2, and dup3 handled unknown flags wrong in fallback cases
- CPU_SETSIZE macro had wrong unit
- select fallback for pre-time64 kernels truncated timeout (vs clamping)

arch-specific bugs fixed:
- x32 new socketcalls took fallback path due to pointer sign extension
- x32 wait4 didn't fill rusage structure (time64 regression)
- x32 semtimedop mismatched timespec ABI with kernel (time64 regression)
- sigaction signal mask was bogus on or1k, microblaze, mips, and riscv
- powerpc-sf longjmp asm clobbered value argument
- or1k poll function passed timeout to syscall in wrong form

Removed upstreamed:
- 800-mips_pie_debug.patch
Manually rebased:
- 600-nftw-support-common-gnu-extension.patch

Signed-off-by: Linhui Liu <liulinhui36@gmail.com>

gettext-full: link to local libunistring

Configure gettext to require and link
to our local libunistring explicitly.

Signed-off-by: Michael Pratt <mcpratt@pm.me>

gettext-full: add missing link to libunistring

Running autoreconf or autogen.sh is causing
the gettext-runtime subdirectory to have a configure script
that looks for and attempts to link to an external libunistring.
However, the macros and symbols for supporting that configuration
are not present in this subdirectory yet.

This results in some host machines to not build the
included libunistring objects for libgrt,
but at the same time, also not input the proper flag to the linker
for linking to an external library when it is found or even when
explicitly setting configuration to use a prefix for libunistring,
resulting in the common linking failure "undefined reference".

Some similar (and old...) upstream commits do the same thing,
but only for gettext-tools and libgettextpo.

Ref: ae943bcc1 ("Link with libunistring, if it exists.") # gettext.git
Ref: 61e21a72f ("Avoid link error in programs that use libgettextpo.") # gettext.git
Signed-off-by: Michael Pratt <mcpratt@pm.me>

libunistring: add from packages feed

Add libunistring in order to link to gettext
and other packages directly
instead of the built-in substitute for it.

Signed-off-by: Michael Pratt <mcpratt@pm.me>

ath79: mikrotik: bump compat version for yafut images

Following 5264296, Mirotik NAND devices now use yafut to flash the
kernel on devices. This method is incompatible with the old-style
"kernel2minor" flash mechanism.

Even though NAND images were disabled in default build since 21.02, a
user flashing a new-style image onto an old-style image would result in
in a soft-brick[1]. In order to prevent such accidental mishap,
especially as these device images will be reenabled in the upcoming
release, bump the compat version.

After the new image is flashed, the compat version can be updated:

    uci set system.@system[0].compat_version='1.1'
    uci commit

[1] https://github.com/openwrt/openwrt/pull/12225#issuecomment-1517529262

Cc: Michał Kępień <openwrt@kempniu.pl>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Reviewed-by: Robert Marko <robimarko@gmail.com>

ethtool: update to 6.3

Release Notes:
https://lore.kernel.org/netdev/20230508213111.z4vjg6gyrm7nwz4r@lion.mk-sys.cz/

Signed-off-by: Nick Hainke <vincent@systemli.org>

strace: update to 6.3

Release Notes:
https://github.com/strace/strace/releases/tag/v6.3

Signed-off-by: Nick Hainke <vincent@systemli.org>

kernel: ltq-ptm: fix compilation warning for vr9

Fix compilation warning for unused variable for vr9.
Fix compilation warning:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/ltq-ptm-vr9/ltq-ptm/ifxmips_ptm_vdsl.c: In function 'mailbox_irq_handler':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/ltq-ptm-vr9/ltq-ptm/ifxmips_ptm_vdsl.c:560:9: error: unused variable 'i' [-Werror=unused-variable]
  560 |     int i;
      |         ^
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

bcm47xx: Refresh patches

Refresh patches to make them cleanly apply.
This problem  was found by the github CI.

Fixes: ecd9abc8c082 ("kernel: use upstream firmware patch for Broadcom's NVRAM")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: backport NVMEM patch for Broadcom's NVRAM MAC cells

It has just been queued for the v6.5. It allows Ethernet drivers to read
MACs from NVRAM using NVMEM interface.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

kernel: use upstream firmware patch for Broadcom's NVRAM

This replaces our 2 downstream patches.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

kernel: ltq-vdsl-vr9: fix multiple compilation warning

Fix multiple compilation warning for fallthrough and unused functions.
Fix compilation warning:
home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/device/drv_dsl_cpe_device_vrx.c: In function 'DSL_DRV_VRX_TestParametersFeUpdate':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/device/drv_dsl_cpe_device_vrx.c:3359:17: error: unused variable 'nMsgId' [-Werror=unused-variable]
 3359 |    DSL_uint16_t nMsgId = EVT_PMD_TESTPARAMSGET;
      |                 ^~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/device/drv_dsl_cpe_device_vrx.c: In function 'DSL_DRV_DEV_AutobootHandleTraining':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/device/drv_dsl_cpe_device_vrx.c:8310:19: error: this statement may fall through [-Werror=implicit-fallthrough=]
 8310 |          bPreFail = DSL_TRUE;
      |          ~~~~~~~~~^~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/device/drv_dsl_cpe_device_vrx.c:8316:7: note: here
 8316 |       case DSL_LINESTATE_EXCEPTION:
      |       ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/pm/drv_dsl_cpe_pm_core.c: In function 'DSL_DRV_PM_CountersReset':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/pm/drv_dsl_cpe_pm_core.c:2328:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2328 |    if (ResetType == DSL_PM_RESET_HISTORY)
      |       ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/pm/drv_dsl_cpe_pm_core.c:2331:4: note: here
 2331 |    case DSL_PM_RESET_TOTAL:
      |    ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/common/drv_dsl_cpe_os_linux.c: In function 'DSL_ModuleCleanup':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/common/drv_dsl_cpe_os_linux.c:1266:13: error: assignment to 'dev_t' {aka 'unsigned int'} from 'void *' makes integer from pointer without a cast [-Werror=int-conversion]
 1266 |    dsl_devt = NULL;
      |             ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/common/drv_dsl_cpe_os_linux.c: At top level:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/common/drv_dsl_cpe_os_linux.c:1178:13: error: 'DSL_DRV_NlSendMsg' defined but not used [-Werror=unused-function]
 1178 | static void DSL_DRV_NlSendMsg(DSL_char_t* pMsg)
      |             ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_dsl_cpe_api-4.17.18.6/src/device/drv_dsl_cpe_msg_vrx.c:2459:20: error: 'DSL_DRV_VRX_SpreadArray' defined but not used [-Werror=unused-function]
 2459 | static DSL_Error_t DSL_DRV_VRX_SpreadArray(
      |                    ^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-vdsl-vr9-mei: fix compilation warning

Fix simple compilation warning due to cast and wrong include.
Fix compilation warning:
In file included from ./include/linux/compat.h:18,
                 from ./include/linux/filter.h:10,
                 from ./include/net/sock.h:59,
                 from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_mei_cpe-1.5.17.6/src/drv_mei_cpe_linux.c:70:
./include/uapi/linux/aio_abi.h:77:45: error: "__LITTLE_ENDIAN" is not defined, evaluates to 0 [-Werror=undef]
   77 | #if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
      |                                             ^~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_mei_cpe-1.5.17.6/src/drv_mei_cpe_linux.c: In function 'MEI_MeminfoProcPerDevGet':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_mei_cpe-1.5.17.6/src/drv_mei_cpe_linux.c:1715:56: error: format '%X' expects argument of type 'unsigned int', but argument 4 has type 'IFX_uint8_t *' {aka 'unsigned char *'} [-Werror=format=]
 1715 |                seq_printf(s, "chunk[%02d]: addr = 0x%08X (0x%08X), "
      |                                                     ~~~^
      |                                                        |
      |                                                        unsigned int
      |                                                     %08hhn
......
 1721 |                      chunkIdx, pChunk[chunkIdx].pImageChunk_aligned,
      |                                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                                                |
      |                                                IFX_uint8_t * {aka unsigned char *}
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xrx200/drv_mei_cpe-1.5.17.6/src/drv_mei_cpe_linux.c:1715:64: error: format '%X' expects argument of type 'unsigned int', but argument 5 has type 'IFX_uint8_t *' {aka 'unsigned char *'} [-Werror=format=]
 1715 |                seq_printf(s, "chunk[%02d]: addr = 0x%08X (0x%08X), "
      |                                                             ~~~^
      |                                                                |
      |                                                                unsigned int
      |                                                             %08hhn
......
 1722 |                      pChunk[chunkIdx].pImageChunk_allocated,
      |                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                                      |
      |                                      IFX_uint8_t * {aka unsigned char *}
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-vectoring: add patch fixing compilation warning

Add patch fixing compilation warning related to stack limit.
Fix compilation warning:
/builder/shared-workdir/build/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/ltq-vectoring-2019-05-20-4fa7ac30/src/vectoring/ifxmips_vectoring.c: In function 'proc_write_dbg':
/builder/shared-workdir/build/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/ltq-vectoring-2019-05-20-4fa7ac30/src/vectoring/ifxmips_vectoring.c:369:1: error: the frame size of 2088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
  369 | }
      | ^
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

mpc85xx: add support for Aerohive BR200-WP

The following adds the Aerohive BR200-WP router to OpenWrt under
the mpc85xx/p1010 subtarget.

Hardware:
- SoC: Freescale P1011
- NOR: Intel JS28F512M29EWH 64MB
- Memory: 2x Nanya NT5TU64M16GG-AC 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- 2x LEDs
- 1x Button
- PoE PSE

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
   dhcp; setenv serverip 192.168.1.3;
   tftpboot 0x2004000 openwrt-mpc85xx-p1010-aerohive_br200-wp-initramfs-kernel.bin;
   bootm 0x2004000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NOR.

Note:

MAC assigns are taken from stock firmware:

Name        MAC addr      Mode       State Chan(Width) VLAN   Radio      Hive       SSID
-------- -------------- --------     ----- ----------- ---- ---------- ---------- ---------
Mgt0     08ea:44XX:XXc0    -           U     -            1     -        hive0        -
Eth0     08ea:44XX:XXc0 wan            U     -            -     -          -          -
Eth1     08ea:44XX:XXc2 access         D     -            -     -        hive0        -
Eth2     08ea:44XX:XXc3 access         D     -            -     -        hive0        -
Eth3     08ea:44XX:XXc4 access         D     -            -     -        hive0        -
Eth4     08ea:44XX:XXc5 access         D     -            -     -        hive0        -
Wifi0    08ea:44XX:XXd0 access         U     1(20MHz)     -  radio_ng0     -          -
Wifi0.1  08ea:44XX:XXd4 access         D     1(20MHz)     -  radio_ng0   hive0        -

Note2:
PoE PSE could be managed with `realtek-poe` package. Example port
config:

config port
        option enable   '1'
        option id       '4'
        option name     'lan2'
        option poe_plus '0'
        option priority '2'
config port
        option enable   '1'
        option id       '3'
        option name     'lan1'
        option poe_plus '0'
        option priority '1'

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(switch@0 -> switch@10, Device's quickstart says LEDs are
amber and white => add function+color properties but keep
labels around, use pr_info)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

kirkwood: Replace dtses with upstream accepted

DTSes from of three boards was sent and accpeted upstream. Let's use
backport patches with small OpenWrt tweak like other upstream stuff.

List of boards:
  - Zyxel NSA310S
  - Endian 4i Edge 200
  - Ctera C-200 V1

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

ath79: add Cisco Meraki MR18

Specifications:

SOC:    Atheros/Qualcomm QCA9557-AT4A @ 720MHz
RAM:    2x Winbond W9751G6KB-25 (128 MiB)
FLASH:  Hynix H27U1G8F2BTR-BC TSOP48 ONFI NAND (128 MiB)
WIFI1:  Atheros AR9550 5.0GHz (SoC)
WIFI2:  Atheros AR9582-AR1A 2.4GHz
WIFI2:  Atheros AR9582-AR1A 2.4GHz + 5GHz
PHYETH: Atheros AR8035-A, 802.3af PoE capable Atheros (1x Gigabit LAN)
LED:    1x Power-LED, 1 x RGB Tricolor-LED
INPUT:  One Reset Button
UART:   JP1 on PCB (Labeled UART), 3.3v-Level, 115200n8
        (VCC, RX, TX, GND - VCC is closest to the boot set jumper
 under the console pins.)

Flashing instructions:

Depending on the installed firmware, there are vastly different
methods to flash a MR18. These have been documented on:
<https://openwrt.org/toh/meraki/mr18>

Tip:
Use an initramfs from a previous release and then use sysupgrade
to get to the later releases. This is because the initramfs can
no longer be built by the build-bots due to its size (>8 MiB).

Note on that:
Upgrades from AR71XX releases are possible, but they will
require the force sysupgrade option ( -F ).

Please backup your MR18's configuration before starting the
update. The reason here is that a lot of development happend
since AR71XX got removed, so I do advise to use the ( -n )
option for sysupgrade as well. This will cause the device
to drop the old AR71xx configuration and make a new
configurations from scratch.

Note on LEDs:
The LEDs has changed since AR71XX. The white LED is now used during
the boot and when upgrading instead of the green tricolor LED. The
technical reason is that currently the RGB-LED is brought up later
by a userspace daemon.

(added warning note about odm-caldata partition. remove initramfs -
it's too big to be built by the bots. MerakiNAND -> meraki-header.
sort nu801's targets)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

ath79: ar934x: still advertise subpage on soft ecc

This sort of reverts Koen Vandeputte's commit
6561ca1fa51 ("ath79: ar934x: fix mounting issues if subpage is not supported")

since it does not work on the MR18 as the UBI is coming from
Meraki in that way and it used to work with AR71XX before.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

ath79: nand: enable software BCH support

This is necessary to support the Meraki MR18 and likely Z1
as well.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

ath79: set 2048B ECC size for Mikrotik boards using soft ECC

Two Mikrotik board families (SXT 5nD R2 and Routerboard 92x are using
software ECC on NAND. Some of them use chips capable of subpage write,
others do not - within the same family, and a common block size is
required for UBI, to avoid mounting errors. Set the ECC step size
explicitly for them to 2048B, so UBI can mount existing volumes without
problems, at the same time allowing to unlocking subpage write functionality,
reuqired for Meraki MR18.

Fixes: 6561ca1fa51 ("ath79: ar934x: fix mounting issues if subpage is not supported")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>

apm821xx: rename MerakiNAND -> meraki-header

specify that this functions adds a Cisco Meraki
special-sauce header for their custom loader/uboot.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

kernel: bump 5.15 to 5.15.111

Removed upstreamed:
01. backport-5.15/424-v6.4-0001-mtd-core-provide-unique-name-for-nvmem-device-take-t.patch
02. backport-5.15/424-v6.4-0002-mtd-core-fix-nvmem-error-reporting.patch
03. generic-backport/424-v6.4-0003-mtd-core-fix-error-path-for-nvmem-provider.patch
04. generic-backport/828-v6.4-0001-of-Fix-modalias-string-generation.patch
05. bcm4908/patches-5.15/031-v5.17-0002-arm64-dts-broadcom-bcm4908-add-DT-for-Netgear-RAXE50.patch
06. bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit
07. bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgita
08. bcm4908/patches-5.15/033-v6.0-0010-arm64-dts-Add-base-DTS-file-for-bcmbca-device-Asus-G.patchgit
09. bcm4908/patches-5.15/034-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch
10. bcm4908/patches-5.15/036-v6.4-0002-arm64-dts-broadcom-bcmbca-bcm4908-fix-NAND-interrupt.patch
11. bcm4908/patches-5.15/036-v6.4-0004-arm64-dts-broadcom-bcmbca-bcm4908-fix-procmon-nodena.patch
12. ipq806x/patches-5.15/104-v6.0-06-ARM-dts-qcom-ipq8064-reduce-pci-IO-size-to-64K.patch

Manually rebased:
bcm27xx/patches-5.15/950-0078-BCM2708-Add-core-Device-Tree-support.patch
bcm27xx/patches-5.15/950-0547-ARM-dts-Add-Pi-Zero-2-support.patch
bcm4908/patches-5.15/033-v6.0-0001-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM63158.patchgit
bcm4908/patches-5.15/033-v6.0-0002-arm64-dts-Add-DTS-files-for-bcmbca-SoC-BCM4912.patchgit
bcm4908/patches-5.15/030-v5.16-0001-arm64-dts-broadcom-bcm4908-Fix-NAND-node-name.patch
bcm4908/patches-5.15/032-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch
bcm4908/patches-5.15/032-v5.18-0003-arm64-dts-broadcom-bcm4908-add-watchdog-block.patch
bcm4908/patches-5.15/032-v5.18-0004-arm64-dts-broadcom-bcm4908-add-I2C-block.patch
bcm4908/patches-5.15/033-v6.0-0003-ARM64-dts-Add-DTS-files-for-bcmbca-SoC-BCM6858.patchgit
bcm4908/patches-5.15/033-v6.0-0008-arm64-dts-broadcom-bcm4908-Fix-timer-node-for-BCM490.patchgit
bcm4908/patches-5.15/034-v6.1-0001-arm64-dts-broadcom-bcm4908-add-remaining-LED-pins.patch
bcm4908/patches-5.15/034-v6.1-0002-arm64-dts-broadcom-bcm4908-add-LEDs-controller-block.patch
bcm4908/patches-5.15/034-v6.1-0003-arm64-dts-broadcom-bcm4908-add-Asus-GT-AC5300-LEDs.patch
bcm4908/patches-5.15/034-v6.1-0004-arm64-dts-bcmbca-update-BCM4908-board-dts-files.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod

01. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=77112d23a671697f0f70695ab901f807e15d2093
02. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=fe07b3b5af01f42b291f5da0da09d047f50b33a6
03. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=273be36e420924237f6c9d43cdad96718c13dd52
04. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=fe8ab85ed4958e58e991bba0aa0a655b552b0273
05. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=6ae67829fa5e9e71f458f69db42f0e216225616a
06. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=1994284cb9226b65ca3a6744ce3320218b584f26
07. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=a46878476c5549a4fde15a31922ce80a50b23492
08. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=112ff0f2530549d50510f116474924f9c4fad590
09. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=7c253e98685e6d884d12e2618ef4d2ad90b4fbd7
10. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=8444b46e163aa9559a0af0381a1d230ec4146eb2
11. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=6d1af517817a760d7af3dee0fc4603645485495c
12. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.111&id=cc4f0e168a5630ad0491ac5328f1a89f3cf3d04e

Signed-off-by: John Audia <therealgraysky@proton.me>

fortify-headers: fix build error when _REDIR_TIME64 is not defined

some targets do not define the _REDIR_TIME64 macro resulting in a
build error regression since ddfe5678a448ac8875e94f2fb4ddca67416fa14a
fix by checking if the macro is defined

[1] https://github.com/openwrt/openwrt/issues/12587

Fixes: #12587
Fixes: ddfe5678a448 ("fortify-headers: fix inconsistent time_t version of ppoll")
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>

bridger: update to the latest version

d4f56f0e6971 add support for handling traffic to/from the bridge device
3ea579064c00 nl: add separate socket for netlink commands
4ec5a51c6d01 nl: fetch packet stats for offloaded flows
0319fd080bf5 add support for configuring a fixed output port for a bridge member port
5b730f0c2cf5 bridger-bpf: fix build on older kernels
00af6c6e8350 nl: process IFLA_MASTER in any nl events, but skip wireless events
a2794f95756e bridger-bpf: add bpf_skb_pull_data call
6974093eb036 nl: rework vlan code to use the iflink API
d0f79a16c749 nl: do not attempt to enable flow offload on older kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>

odhcp6c: add skpriority option

Allowing the (kernel) packet priority to be set through UCI.

This makes it straightforward to set some VLAN priority for DHCP
requests through a simple egress qos map. (Avoiding the need for
firewall matching and marking through iptables, which prevents using
flow offloading).

(Such priority tag is a hard requirement for some ISPs, such as Orange
in France).

Depends on: https://github.com/openwrt/odhcp6c/pull/74

Signed-off-by: Pacien TRAN-GIRARD <pacien.trangirard@pacien.net>

odhcp6c: bump to latest git HEAD

bcd2836 odhcp6c: add -K option to set packet kernel priority

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

build: remove backwards compatibility for PKG_USE_MIPS16

All package feeds have been refactored to PKG_BUILD_FLAGS:=no-mips16.

Signed-off-by: Andre Heider <a.heider@gmail.com>

ramips: remove device tree legacy compatibility

We switched to 5.15 kernel, so we don't need to maintain 5.10
compatibility anymore.

Signed-off-by: Nick Hainke <vincent@systemli.org>

treewide: cleanup kernel symbol references

We only use 5.15 kernel. So remove all those unnecessary symbols
referencing 5.10 or 5.15 kernel.

Can be found with:
  git grep -E 'LINUX_5_1(0|5)'

Note that we remove the dependency from "sound-soc-chipdip-dac" instead
of removing the complete kernel package. The 5.15 version bump forgot to
delete the "@LINUX_5_10" dependency. The kernel package is still needed
in 5.15 kernel.

Signed-off-by: Nick Hainke <vincent@systemli.org>

treewide: remove all @{lt,gt,ge,le} appearances affecting 5.10 kernel

We only use 5.15 kernel. So remove all those unnecessary appearances.

Signed-off-by: Nick Hainke <vincent@systemli.org>

kernel: remove unnecessary qca-sdk patch for 5.10 kernel

We removed 5.10 kernel, so remove also the patch that only affects 5.10
kernels.

Manually refresh:
- 0005-SSDK-config-add-kernel-5.15.patch
- 0010-QSDK-config-Avoid-Werror-heroics.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>

toolchain: glibc: increase min kernel version to 5.15

The purpose of this is to remove all of the compatibility code that is
normally compiled into glibc for kernels < 5.15 from our build. Only
Linux kernels >= 5.15 will be supported.

Signed-off-by: Nick Hainke <vincent@systemli.org>

treewide: remove files for building 5.10 kernel

All targets are bumped to 5.15. Remove the old 5.10 patches, configs
and files using:

  find target/linux -iname '*-5.10' -exec rm -r {} \;

Further, remove the 5.10 include.

Signed-off-by: Nick Hainke <vincent@systemli.org>

ath25: switch default kernel to 5.15

Switch to kernel 5.15 although it is marked as source only. It is marked
as source only because nobody was able to test this device.

Merging this is important to finally branch a new release. We want to
get rid completely of 5.10 kernel. Without this commit we get following
error: "Missing kernel version/hash file for 5.10." Hopfully someone
will fix the board in the rc phase or it will be removed completly.

Signed-off-by: Nick Hainke <vincent@systemli.org>

ath25: 5.15: enable 5.15 testing kernel

Manually refreshed:
- 140-redboot_boardconfig.patch
- 141-redboot_partition_scan.patch
- 142-redboot_various_erase_size_fix.patch

Automatically refreshed:
- 107-ar5312_gpio.patch
- 108-ar2315_gpio.patch
- 110-ar2313_ethernet.patch
- 120-spiflash.patch
- 130-watchdog.patch
- 330-board_leds.patch

Use "make kernel_oldconfig" to refresh the new kernel config.

The Ubiquiti Nanostation 2 (XS2) and Ubiquiti Nanostation 5 (XS5) should
be marked as broken when switching to 5.15 by default. The new kernel
does not fit anymore into the partition.

Signed-off-by: Nick Hainke <vincent@systemli.org>

ath25: 5:15: copy config and patch from 5.10

Copy config and patch from kernel 5.10 to kernel 5.15.

Signed-off-by: Nick Hainke <vincent@systemli.org>

omap: switch default kernel to 5.15

Switch to kernel 5.15 although it is marked as source only. It is marked
as source only because the eth0 interface can't be added to the br-lan
default interface resulting in a broken ethernet [0]. There is a
workaround to set a higher pvd (e.g. to 4000) in the dts [1].

Other functionality was already tested on a Beaglebone Black for
+6month now without issues.

Merging this is important to finally branch a new release. We want to
get rid completely of 5.10 kernel. Without this commit we get following
error: "Missing kernel version/hash file for 5.10." Hopfully someone
will fix the board in the rc phase.

- [0] https://github.com/openwrt/openwrt/issues/11953
- [1] https://github.com/openwrt/openwrt/issues/11953#issuecomment-1419078990

Signed-off-by: Alexey Smirnov <s.alexey@gmail.com>
[rewrite commit message]
Signed-off-by: Nick Hainke <vincent@systemli.org>

lantiq: 5.15: fix compilation warning pciex fixup patch

pcibios_map_irq request a const pci_dev while pci_find_capability
doesn't. Cast dropping the const to fix compilation warning.
Fix compilation warning:
arch/mips/pci/fixup-lantiq.c: In function 'pcibios_map_irq':
arch/mips/pci/fixup-lantiq.c:34:33: error: passing argument 1 of 'pci_find_capability' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
   34 |         if (pci_find_capability(dev, PCI_CAP_ID_EXP))
      |                                 ^~~
In file included from arch/mips/pci/fixup-lantiq.c:9:
./include/linux/pci.h:1129:40: note: expected 'struct pci_dev *' but argument is of type 'const struct pci_dev *'
 1129 | u8 pci_find_capability(struct pci_dev *dev, int cap);
      |                        ~~~~~~~~~~~~~~~~^~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

linux/generic/hack-5.15: add missing patch header

This patch does not have a valid patch headers and does not apply on
an external git tree with 'git am'. To fix this add the missing header.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

fortify-headers: fix inconsistent time_t version of ppoll

Bug:
fortify/poll.h includes poll.h, which redirects ppoll to __ppoll_time64
if the _REDIR_TIME64 macro is 1. Then fortify/poll.h will #undef ppoll
and use the 32 bit version.

Fix: we should not do this when _REDIR_TIME64 is 1.

[1] https://forum.openwrt.org/t/idle-cpu-usage-of-usbmuxd/140331/15
[2] https://github.com/openwrt/openwrt/issues/12574

Signed-off-by: Georgi Valkov <gvalkov@gmail.com>

toolchain: gcc: update to 12.3.0

Release notes:
https://gcc.gnu.org/gcc-12/changes.html

Refresh patches:
- 230-musl_libssp.patch
- 910-mbsd_multi.patch
- 920-specs_nonfatal_getenv.patch
- 970-macos_arm64-building-fix.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>

ramips: fix mt7621 kernel compilation

The OF LED configuration patch fails on MT7621, as the necessary headers
were only included for the mediatek subtarget with an additional patch.

Fixes: 242fe8634eba ("generic: add hack for MT753x LED configuration")
Signed-off-by: David Bauer <mail@david-bauer.net>

kernel: ltq-deu: fix compilation warning

Fix compilation warning for fallthrough and unused variables.
Fix compilation warning:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_des.c: In function 'ifx_deu_des':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_des.c:206:35: error: this statement may fall through [-Werror=implicit-fallthrough=]
  206 |                         des->K3LR = DEU_ENDIAN_SWAP(*((u32 *) key + 5));
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_des.c:209:17: note: here
  209 |                 case 16:
      |                 ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_des.c:211:35: error: this statement may fall through [-Werror=implicit-fallthrough=]
  211 |                         des->K2LR = DEU_ENDIAN_SWAP(*((u32 *) key + 3));
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_des.c:214:17: note: here
  214 |                 case 8:
      |                 ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_aes.c: In function 'ifx_deu_aes':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_aes.c:260:21: error: unused variable 'ctx' [-Werror=unused-variable]
  260 |     struct aes_ctx *ctx = (struct aes_ctx *)ctx_arg;
      |                     ^~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_aes.c: In function 'ifx_deu_aes_xts':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_aes.c:702:21: error: unused variable 'ctx' [-Werror=unused-variable]
  702 |     struct aes_ctx *ctx = (struct aes_ctx *)ctx_arg;
      |                     ^~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_sha1.c: In function 'sha1_final':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_sha1.c:203:19: error: unused variable 'flag' [-Werror=unused-variable]
  203 |     unsigned long flag;
      |                   ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_sha1.c:202:33: error: unused variable 'hashs' [-Werror=unused-variable]
  202 |     volatile struct deu_hash_t *hashs = (struct deu_hash_t *) HASH_START;
      |                                 ^~~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_md5.c: In function 'md5_init':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_md5.c:146:33: error: unused variable 'hash' [-Werror=unused-variable]
  146 |     volatile struct deu_hash_t *hash = (struct deu_hash_t *) HASH_START;
      |                                 ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_md5.c: In function 'md5_final':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_md5.c:204:19: error: unused variable 'flag' [-Werror=unused-variable]
  204 |     unsigned long flag;
      |                   ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-deu-danube/ltq-deu/ifxmips_md5.c:203:33: error: unused variable 'hashs' [-Werror=unused-variable]
  203 |     volatile struct deu_hash_t *hashs = (struct deu_hash_t *) HASH_START;
      |                                 ^~~~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-vmmc: fix compilation warning

Fix compilation warning from ret not handled from copy_from_user and
missing fallthrough.
Fix compilation warning:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_vmmc-1.9.0/src/drv_vmmc_bbd.c: In function 'vmmc_BBD_WhiteListedCmdWr':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_vmmc-1.9.0/src/drv_vmmc_bbd.c:1012:16: error: this statement may fall through [-Werror=implicit-fallthrough=]
 1012 |             if (IFX_TRUE == pCh->pParent->bSlicSupportsIdleMode)
      |                ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_vmmc-1.9.0/src/drv_vmmc_bbd.c:1028:7: note: here
 1028 |       case VMMC_WL_SDD_RING_CFG:
      |       ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_vmmc-1.9.0/src/drv_vmmc_ioctl.c: In function 'VMMC_Dev_Spec_Ioctl':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_vmmc-1.9.0/src/drv_vmmc_ioctl.c:111:15: error: ignoring return value of 'copy_from_user' declared with attribute 'warn_unused_result' [-Werror=unused-result]
  111 |               copy_from_user (p_arg, (IFX_uint8_t*)ioarg, sizeof(arg));\
      |               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_vmmc-1.9.0/src/drv_vmmc_ioctl.c:475:7: note: in expansion of macro 'ON_IOCTL'
  475 |       ON_IOCTL((VMMC_CHANNEL *) pLLDummyCh,
      |       ^~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_vmmc-1.9.0/src/drv_vmmc_ioctl.c:113:15: error: ignoring return value of 'copy_to_user' declared with attribute 'warn_unused_result' [-Werror=unused-result]
  113 |               copy_to_user ((IFX_uint8_t*)ioarg, p_arg, sizeof(arg));\
      |               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_vmmc-1.9.0/src/drv_vmmc_ioctl.c:475:7: note: in expansion of macro 'ON_IOCTL'
  475 |       ON_IOCTL((VMMC_CHANNEL *) pLLDummyCh,
      |       ^~~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-tapi: add patch fixing compilation warning

Add patch fixing compilation warning for switch fallthrough and
copy_to_user ret not handled.
Fix compilation warning:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_dial.c: In function 'ifx_tapi_dial_OnTimer':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_dial.c:318:38: error: this statement may fall through [-Werror=implicit-fallthrough=]
  318 |          pTapiDialData->nHookChanges = 0;
      |          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_dial.c:322:7: note: here
  322 |       case TAPI_HOOK_STATE_DIAL_L_VAL:
      |       ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_event.c: In function 'IFX_TAPI_Event_Dispatch_ProcessCtx':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_event.c:1546:30: error: this statement may fall through [-Werror=implicit-fallthrough=]
 1546 |                   pEvent->ch = IFX_TAPI_DEVICE_CH_NUMBER;
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_event.c:1548:16: note: here
 1548 |                case  IFX_TAPI_ERRSRC_LL_CH:
      |                ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_ioctl.c: In function 'TAPI_IoctlDev':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_ioctl.c:705:19: error: ignoring return value of 'copy_to_user' declared with attribute 'warn_unused_result' [-Werror=unused-result]
  705 |                   copy_to_user ((IFX_void_t*)ioarg, p_tmp, sizeof(IFX_TAPI_CAP_t));
      |                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_ioctl.c: In function 'TAPI_IoctlCh':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_ioctl.c:1553:14: error: this statement may fall through [-Werror=implicit-fallthrough=]
 1553 |          ret = TAPI_statusNotSupported;
      |          ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_ioctl.c:1555:7: note: here
 1555 |       default:
      |       ^~~~~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c: In function 'cid_fsm_alert_exec':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:2037:31: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2037 |          pTxData->nCidSubState++;
      |          ~~~~~~~~~~~~~~~~~~~~~^~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:2039:7: note: here
 2039 |       case 1:
      |       ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:2053:31: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2053 |          pTxData->nCidSubState++;
      |          ~~~~~~~~~~~~~~~~~~~~~^~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:2055:7: note: here
 2055 |       case 2:
      |       ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:2070:31: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2070 |          pTxData->nCidSubState++;
      |          ~~~~~~~~~~~~~~~~~~~~~^~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:2072:7: note: here
 2072 |       default:
      |       ^~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c: In function 'cid_prepare_data':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:1501:13: error: this statement may fall through [-Werror=implicit-fallthrough=]
 1501 |          if (IFX_TAPI_CID_HM_ONHOOK == pTxData->txHookMode)
      |             ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:1509:7: note: here
 1509 |       default:
      |       ^~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:1531:16: error: this statement may fall through [-Werror=implicit-fallthrough=]
 1531 |             if (IFX_TAPI_CID_STD_KPN_DTMF_FSK != pConfData->nStandard)
      |                ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:1535:10: note: here
 1535 |          case IFX_TAPI_CID_GEN_TYPE_FSK:
      |          ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c: In function 'cid_lookup_transparent':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:1425:10: error: this statement may fall through [-Werror=implicit-fallthrough=]
 1425 |          cidfsk_set_tx_time (pTxData, &pConfData->TapiCidFskConf);
      |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:1427:7: note: here
 1427 |       case IFX_TAPI_CID_GEN_TYPE_DTMF:
      |       ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c: In function 'TAPI_Phone_CID_Stop_Tx':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:3445:10: error: this statement may fall through [-Werror=implicit-fallthrough=]
 3445 |          switch (pTxData->nAlertType)
      |          ^~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:3461:7: note: here
 3461 |       case TAPI_CID_STATE_ACK:
      |       ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:3463:13: error: this statement may fall through [-Werror=implicit-fallthrough=]
 3463 |          if (ptr_chk(pDrvCtx->SIG.DTMFD_Override, ""))
      |             ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:3472:7: note: here
 3472 |       case TAPI_CID_STATE_SENDING:
      |       ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c: In function 'TAPI_Phone_Get_CidRxData':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:4060:10: error: this statement may fall through [-Werror=implicit-fallthrough=]
 4060 |       if (IFX_Fifo_isEmpty(&(pCidRx->TapiCidRxFifo)))
      |          ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/drv_tapi-3.13.0/src/drv_tapi_cid.c:4069:4: note: here
 4069 |    default:
      |    ^~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-atm: add patch fixing compilation warning for ltq_atm

Fix compilation warning caused by copy_from_user ret not handled.
Fix compilation warning:
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-atm-ase/ltq-atm/ltq_atm.c: In function 'ppe_ioctl':
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-atm-ase/ltq-atm/ltq_atm.c:341:17: error: ignoring return value of 'copy_from_user' declared with attribute 'warn_unused_result' [-Werror=unused-result]
  341 |                 copy_from_user(&mib_vcc, arg, sizeof(mib_vcc));
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-vdsl-vr11: fix compilation waring

Add patch fixing compilation warning from missing fallthrough
Fix compilation warning:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/common/drv_dsl_cpe_api.c: In function 'DSL_DRV_AutobootControlSet':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/common/drv_dsl_cpe_api.c:2648:19: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2648 |                if (pContext->bAutobootThreadStarted)
      |                   ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/common/drv_dsl_cpe_api.c:2656:13: note: here
 2656 |             case DSL_AUTOBOOT_CTRL_STOP_PD:
      |             ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/pm/drv_dsl_cpe_pm_core.c: In function 'DSL_DRV_PM_CountersReset':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/pm/drv_dsl_cpe_pm_core.c:2358:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2358 |    if (ResetType == DSL_PM_RESET_HISTORY)
      |       ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/pm/drv_dsl_cpe_pm_core.c:2361:4: note: here
 2361 |    case DSL_PM_RESET_TOTAL:
      |    ^~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/pm/drv_dsl_cpe_pm_core.c:2365:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2365 |    if (ResetType == DSL_PM_RESET_TOTAL)
      |       ^
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/pm/drv_dsl_cpe_pm_core.c:2368:4: note: here
 2368 |    case DSL_PM_RESET_HISTORY_SHOWTIME:
      |    ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/device/drv_dsl_cpe_device_vrx.c: In function 'DSL_DRV_DEV_AutobootHandleTraining':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/device/drv_dsl_cpe_device_vrx.c:8883:19: error: this statement may fall through [-Werror=implicit-fallthrough=]
 8883 |          bPreFail = DSL_TRUE;
      |          ~~~~~~~~~^~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_api-ugw_8.5.2.10/src/device/drv_dsl_cpe_device_vrx.c:8889:7: note: here
 8889 |       case DSL_LINESTATE_EXCEPTION:
      |       ^~~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-vdsl-vr11-mei: fix compilation warning

Fix compilation warning in variable length array msg and ret value not
handled.
Fix compilation warning:
/__w/openwrt/openwrt/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_chromium/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_api_intern.c: In function 'MEI_Internal_DumpMessage':
/__w/openwrt/openwrt/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_chromium/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_api_intern.c:441:4: error: ISO C90 forbids variable length array 'msg' [-Werror=vla]
  441 |    char msg[nMsgSize];
      |    ^~~~
/__w/openwrt/openwrt/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_chromium/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_api_intern.c:442:4: error: ISO C90 forbids array 'buf' whose size cannot be evaluated [-Werror=vla]
  442 |    char buf[nBufSize];
      |    ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_linux.c: In function 'MEI_Ioctl':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_linux.c:1270:4: error: ignoring return value of 'copy_to_user' declared with attribute 'warn_unused_result' [-Werror=unused-result]
 1270 |    copy_to_user( ((IOCTL_MEI_arg_t *)nArgument), &local_args, retSize);
      |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_linux.c: In function 'MEI_IoctlMeiDbgAccessWr_Wrap':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_linux.c:3574:4: error: ignoring return value of 'copy_to_user' declared with attribute 'warn_unused_result' [-Werror=unused-result]
 3574 |    copy_to_user( (void *)&pUserArgument->count,
      |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 3575 |                  (void *)&pLocalArgument->count,
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 3576 |                  sizeof(pUserArgument->count) ) ;
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_linux.c: In function 'MEI_IoctlMeiDbgAccessRd_Wrap':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_linux.c:3603:7: error: ignoring return value of 'copy_to_user' declared with attribute 'warn_unused_result' [-Werror=unused-result]
 3603 |       copy_to_user( pUserBuf,
      |       ^~~~~~~~~~~~~~~~~~~~~~~
 3604 |                     pLocalArgument->pData_32,
      |                     ~~~~~~~~~~~~~~~~~~~~~~~~~
 3605 |                     pLocalArgument->count * sizeof(IFX_uint32_t) ) ;
      |                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-arm-openwrt-linux-muslgnueabi_musl/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_linux.c:3610:4: error: ignoring return value of 'copy_to_user' declared with attribute 'warn_unused_result' [-Werror=unused-result]
 3610 |    copy_to_user( (void *)&pUserArgument->count,
      |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 3611 |                  (void *)&pLocalArgument->count,
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 3612 |                  sizeof(pUserArgument->count) ) ;
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-ptm: add patch fixing compilation warning

Add patch fixing compilation warning for some debugfs entry defined but
unused.
Fix compilation warning:
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-ptm-danube/ltq-ptm/ifxmips_ptm_adsl.c:969:12: error: 'proc_read_genconf' defined but not used [-Werror=unused-function]
  969 | static int proc_read_genconf(char *page, char **start, off_t off, int count, int *eof, void *data)
      |            ^~~~~~~~~~~~~~~~~
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-ptm-danube/ltq-ptm/ifxmips_ptm_adsl.c:942:12: error: 'proc_write_wanmib' defined but not used [-Werror=unused-function]
  942 | static int proc_write_wanmib(struct file *file, const char *buf, unsigned long count, void *data)
      |            ^~~~~~~~~~~~~~~~~
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-ptm-danube/ltq-ptm/ifxmips_ptm_adsl.c:910:12: error: 'proc_read_wanmib' defined but not used [-Werror=unused-function]
  910 | static int proc_read_wanmib(char *page, char **start, off_t off, int count, int *eof, void *data)
      |            ^~~~~~~~~~~~~~~~
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-ptm-danube/ltq-ptm/ifxmips_ptm_adsl.c:892:12: error: 'proc_read_version' defined but not used [-Werror=unused-function]
  892 | static int proc_read_version(char *buf, char **start, off_t offset, int count, int *eof, void *data)
      |            ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_xway/ltq-ptm-danube/ltq-ptm/ifxmips_ptm_adsl.c:1164:19: error: 'stricmp' defined but not used [-Werror=unused-function]
 1164 | static INLINE int stricmp(const char *p1, const char *p2)
      |                   ^~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: ltq-adsl: add patch fixing compilation warning

Add patch fixing compilation warning due to not handled switch
fallthrough, stack limit and compilation warning in g997 module.
Fix compilation warning:
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/pm/drv_dsl_cpe_pm_core.c: In function 'DSL_DRV_PM_CountersReset':
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/pm/drv_dsl_cpe_pm_core.c:2277:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2277 |    if (ResetType == DSL_PM_RESET_HISTORY)
      |       ^
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/pm/drv_dsl_cpe_pm_core.c:2280:4: note: here
 2280 |    case DSL_PM_RESET_TOTAL:
      |    ^~~~
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/pm/drv_dsl_cpe_pm_core.c:2284:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
 2284 |    if (ResetType == DSL_PM_RESET_TOTAL)
      |       ^
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/pm/drv_dsl_cpe_pm_core.c:2287:4: note: here
 2287 |    case DSL_PM_RESET_HISTORY_SHOWTIME:
      |    ^~~~
cc1: all warnings being treated as errors

/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/device/drv_dsl_cpe_device_danube.c: In function 'DSL_DRV_DEV_AutobootHandleTraining':
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/device/drv_dsl_cpe_device_danube.c:3189:19: error: this statement may fall through [-Werror=implicit-fallthrough=]
 3189 |                if (nErrCode != DSL_SUCCESS)
      |                   ^
/__w/openwrt/openwrt/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/device/drv_dsl_cpe_device_danube.c:3197:13: note: here
 3197 |             case DSL_LINESTATE_IDLE:
      |             ^~~~
cc1: all warnings being treated as errors

/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/g997/drv_dsl_cpe_api_g997_danube.c: In function 'DSL_DRV_DEV_G997_PowerManagementStateForcedTrigger':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/g997/drv_dsl_cpe_api_g997_danube.c:2532:52: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
 2532 |                      else if (((nVal >> 4) & 0x15) == 0x9)
      |                                                    ^~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/g997/drv_dsl_cpe_api_g997_danube.c: In function 'DSL_DRV_DEV_G997_DeltHlogGet':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-mips-openwrt-linux-musl_musl/linux-lantiq_ase/ltq-dsl-ase/drv_dsl_cpe_api-3.24.4.4/src/g997/drv_dsl_cpe_api_g997_danube.c:2108:1: error: the frame size of 1056 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
 2108 | }
      | ^
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: broadcom-wl: multiple fix to make the package compilable again

Add multiple patch to make the package compilable again.
Aside from some fixup of obvius wrong code, some real fix were needed.
This fix any compilation warning found on compiling the package on
bcm47xx. (omitted since they are too much)

The real problem of this package was the missing MODULE_LICENSE now
mandatory even without WERROR. Set to Proprietary.
And the big blocker is that Broadcom provided an object file targetting
an old kernel version.
The module on modprobe try to find the symbol printk but printk was
dropped and replaced to _printk.
To handle this change we use objcopy tool to rename the symbol to the
new name permitting a correct modprobe and creation of .ko

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: mwlwifi: add patch fixing compilation warning on 64bit systems

Add patch fixing compilation warning on 64bit systems.
Fix compilation warning:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/fwcmd.c: In function 'mwl_fwcmd_get_fw_core_dump':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/fwcmd.c:3608:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
 3608 |                (const void *)((u32)pcmd +
      |                               ^
In file included from ./include/linux/device.h:15,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/device.h:3,
                 from ./include/linux/dma-mapping.h:7,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/dma-mapping.h:3,
                 from ./include/linux/skbuff.h:31,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/skbuff.h:3,
                 from ./include/linux/if_ether.h:19,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/if_ether.h:3,
                 from ./include/linux/etherdevice.h:20,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/etherdevice.h:3,
                 from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.c:20:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.c: In function 'pcie_tx_init_ndp':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.c:338:38: error: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Werror=format=]
  338 |                 wiphy_err(hw->wiphy, "driver data is not enough: %d (%d)\n",
      |                                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap'
  110 |                 _p_func(dev, fmt, ##__VA_ARGS__);                       \
      |                              ^~~
./include/linux/dev_printk.h:144:56: note: in expansion of macro 'dev_fmt'
  144 |         dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
      |                                                        ^~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211/net/cfg80211.h:8828:9: note: in expansion of macro 'dev_err'
 8828 |         dev_err(&(wiphy)->dev, format, ##args)
      |         ^~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.c:338:17: note: in expansion of macro 'wiphy_err'
  338 |                 wiphy_err(hw->wiphy, "driver data is not enough: %d (%d)\n",
      |                 ^~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.c:338:67: note: format string is defined here
  338 |                 wiphy_err(hw->wiphy, "driver data is not enough: %d (%d)\n",
      |                                                                  ~^
      |                                                                   |
      |                                                                   int
      |                                                                  %ld
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.c:338:38: error: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Werror=format=]
  338 |                 wiphy_err(hw->wiphy, "driver data is not enough: %d (%d)\n",
      |                                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap'
  110 |                 _p_func(dev, fmt, ##__VA_ARGS__);                       \
      |                              ^~~
./include/linux/dev_printk.h:144:56: note: in expansion of macro 'dev_fmt'
  144 |         dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
      |                                                        ^~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211/net/cfg80211.h:8828:9: note: in expansion of macro 'dev_err'
 8828 |         dev_err(&(wiphy)->dev, format, ##args)
      |         ^~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.c:338:17: note: in expansion of macro 'wiphy_err'
  338 |                 wiphy_err(hw->wiphy, "driver data is not enough: %d (%d)\n",
      |                 ^~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.c:338:71: note: format string is defined here
  338 |                 wiphy_err(hw->wiphy, "driver data is not enough: %d (%d)\n",
      |                                                                      ~^
      |                                                                       |
      |                                                                       int
      |                                                                      %ld
  CC [M]  /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/debugfs.o
In file included from ./include/linux/device.h:15,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/device.h:3,
                 from ./include/linux/dma-mapping.h:7,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/dma-mapping.h:3,
                 from ./include/linux/skbuff.h:31,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/skbuff.h:3,
                 from ./include/linux/if_ether.h:19,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/if_ether.h:3,
                 from ./include/linux/etherdevice.h:20,
                 from /home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211-backport/linux/etherdevice.h:3,
                 from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/pcie.c:19:
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/pcie.c: In function 'pcie_bf_mimo_ctrl_decode':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/pcie.c:1325:37: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
 1325 |                           filename, (unsigned int)fp_data);
      |                                     ^
./include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap'
  110 |                 _p_func(dev, fmt, ##__VA_ARGS__);                       \
      |                                     ^~~~~~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/target-aarch64_cortex-a53_musl/usr/include/mac80211/net/cfg80211.h:8828:9: note: in expansion of macro 'dev_err'
 8828 |         dev_err(&(wiphy)->dev, format, ##args)
      |         ^~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/pcie.c:1324:17: note: in expansion of macro 'wiphy_err'
 1324 |                 wiphy_err(priv->hw->wiphy, "Error opening %s! %x\n",
      |                 ^~~~~~~~~
cc1: all warnings being treated as errors
make[4]: *** [scripts/Makefile.build:289: /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/tx_ndp.o] Error 1
make[4]: *** Waiting for unfinished jobs....
cc1: all warnings being treated as errors
make[4]: *** [scripts/Makefile.build:289: /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/hif/pcie/pcie.o] Error 1
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/debugfs.c: In function 'mwl_debugfs_regrdwr_read':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/mwlwifi-2023-04-29-6a436714/debugfs.c:1335:43: error: format '%d' expects argument of type 'int', but argument 4 has type 'ssize_t' {aka 'long int'} [-Werror=format=]
 1335 |                                  "error: %d(%u 0x%08x 0x%08x)\n",
      |                                          ~^
      |                                           |
      |                                           int
      |                                          %ld
 1336 |                                  ret, priv->reg_type, priv->reg_offset,
      |                                  ~~~
      |                                  |
      |                                  ssize_t {aka long int}
cc1: all warnings being treated as errors

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>