Gabor Juhos [Sat, 12 Apr 2014 17:42:35 +0000 (17:42 +0000)]
ar71xx: wndr4300: add LED for 2.4Ghz wifi interface
Based on the the WNDR3700v4 support patch from Ralph Perlich:
http://patchwork.openwrt.org/patch/4763/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40475
Gabor Juhos [Sat, 12 Apr 2014 17:42:34 +0000 (17:42 +0000)]
ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOs
The bootloader does not initializes the output function
correctly for all LEDs. DO that from the board setup code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40474
Gabor Juhos [Sat, 12 Apr 2014 17:42:33 +0000 (17:42 +0000)]
ar71xx: wndr4300: change 'orange' to 'amber' in LED color names
The hardware manual says amber so change the color part of
the LED names to reflect that. Also update the constant names.
Based on the the WNDR3700v4 support patch from Ralph Perlich:
http://patchwork.openwrt.org/patch/4763/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40473
Gabor Juhos [Sat, 12 Apr 2014 16:01:45 +0000 (16:01 +0000)]
ar71xx: fix typos in TP-Link rssileds definition
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5109/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40472
Gabor Juhos [Sat, 12 Apr 2014 16:01:43 +0000 (16:01 +0000)]
ar71xx: add rssileds for Ubiquiti XM boards
Adds support for the received signal strength indicator LEDs of the
Bullet M, Nanostation M and Rocket M devices.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5108/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40471
Felix Fietkau [Sat, 12 Apr 2014 15:43:17 +0000 (15:43 +0000)]
kernel: mark kmod-usb-phy-nop as hidden to avoid building it where it is not needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40470
Felix Fietkau [Sat, 12 Apr 2014 14:28:34 +0000 (14:28 +0000)]
hostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since r39995)
r39995 introduced a new parameter wps_pbc_in_m1 to wifi wps config, but
apparently did not provide a default value 0.
When that option's non-existing value is later evaluated in
/lib/netifd/hostapd.sh, it causes the "bad number" error to be logged in
syslog if user has not set the wps_pbc_in_m1 option. The error materialises
only if user has enabled wps.
Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio1 (1254): sh: bad number
Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio0 (1253): sh: bad number
Discussion in bug 15508: https://dev.openwrt.org/ticket/15508#comment:3
Error is caused by line 282:
https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/netifd.sh#L282
My patch sets the parameter's default value to 0, which does nothing. The
default might also be set a bit later in the function, but this felt like the
most clear place to do that.
Signed-off-by hnyman <hannu.nyman@iki.fi>
SVN-Revision: 40469
Gabor Juhos [Sat, 12 Apr 2014 12:05:18 +0000 (12:05 +0000)]
x86/net5501: remove broken flag
According to Christophe, the kernel boots on the Soekris net5501
board.
Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40468
Gabor Juhos [Sat, 12 Apr 2014 11:59:07 +0000 (11:59 +0000)]
kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40467
Gabor Juhos [Sat, 12 Apr 2014 11:59:05 +0000 (11:59 +0000)]
ar71xx: fix image generation
Move the comments out from the shell script to fix build
breakage introduced in r40464.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40466
Gabor Juhos [Sat, 12 Apr 2014 10:21:04 +0000 (10:21 +0000)]
ar71xx: avoid spurious restarts caused by the watchdog on AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40465
Gabor Juhos [Sat, 12 Apr 2014 09:52:58 +0000 (09:52 +0000)]
ar71xx: add comments for image Makefile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5075/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40464
Gabor Juhos [Sat, 12 Apr 2014 09:52:54 +0000 (09:52 +0000)]
ar71xx: initial support for TP-Link Archer C7v2
The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver.
The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1.
Signed-off-by: Adam Serbinski <adam@serbinski.com>
Patchwork: http://patchwork.openwrt.org/patch/5071/
[juhosg:
- remove the v2 specific profile add the ath10k driver to the existing
Archer C7 profile instead. Although on v1 devices it does not change
the non-working behaviour, but the ath10k driver is useful for users
whom have replaced the wifi card with a supported one in their units.
- update image/Makefile to build firmware image for both boards if the
Archer C7 profile is selected]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40463
Florian Fainelli [Fri, 11 Apr 2014 22:38:54 +0000 (22:38 +0000)]
brcm2708: add missing configuration symbols
Spotted by buildbot and while doing a CONFIG_ALL=y build.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 40462
John Crispin [Fri, 11 Apr 2014 20:40:34 +0000 (20:40 +0000)]
lantiq: add an extra partition to the TDW8970 flash that can be used to store the vdsl firmware
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40461
John Crispin [Fri, 11 Apr 2014 20:40:24 +0000 (20:40 +0000)]
lantiq: more vdsl related cleanups
* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40460
Felix Fietkau [Fri, 11 Apr 2014 20:28:55 +0000 (20:28 +0000)]
netifd: switch to using git.openwrt.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40459
Jo-Philipp Wich [Fri, 11 Apr 2014 16:14:09 +0000 (16:14 +0000)]
uci: fix import with not yet existing packages, preserve config permissions on commit, fix Lua detection in cmake
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40458
Jo-Philipp Wich [Fri, 11 Apr 2014 16:13:27 +0000 (16:13 +0000)]
uhttpd: do not attempt to configure Lua handler if referenced file does not exist
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40457
Felix Fietkau [Fri, 11 Apr 2014 13:48:41 +0000 (13:48 +0000)]
netifd: update to latest version, adds a force_link parameter to bring up an interface without active device carrier
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40456
Felix Fietkau [Fri, 11 Apr 2014 13:22:28 +0000 (13:22 +0000)]
x86_64: add usb support (including storage) to the kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40455
Felix Fietkau [Fri, 11 Apr 2014 13:22:24 +0000 (13:22 +0000)]
x86: set default kernel version to 3.10
Place the previous selection (3.3.8) into the only subtarget that did
not override it to 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40454
Felix Fietkau [Fri, 11 Apr 2014 13:22:19 +0000 (13:22 +0000)]
x86: remove linux 3.8 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40453
Imre Kaloz [Fri, 11 Apr 2014 10:19:26 +0000 (10:19 +0000)]
generate esxi compatible vmdks, too
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40452
Imre Kaloz [Fri, 11 Apr 2014 10:14:57 +0000 (10:14 +0000)]
reuqire qemu-img to be installed (the one we have in tools is too old)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40451
Felix Fietkau [Thu, 10 Apr 2014 15:21:13 +0000 (15:21 +0000)]
netifd: update to the latest version, fixes some reload issues with proto=static
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40449
Felix Fietkau [Thu, 10 Apr 2014 14:43:33 +0000 (14:43 +0000)]
kernel: add a dependency of kmod-r8169 on r8169-firmware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40448
Felix Fietkau [Thu, 10 Apr 2014 14:43:30 +0000 (14:43 +0000)]
linux-firmware: add a new package for firmware (currently only builds r8169 firmware)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40447
Felix Fietkau [Thu, 10 Apr 2014 14:43:26 +0000 (14:43 +0000)]
build: add support for packing version control downloads with xz
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40446
Felix Fietkau [Thu, 10 Apr 2014 14:43:22 +0000 (14:43 +0000)]
generic: remove obsolete symbol export from block2mtd init patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40445
Felix Fietkau [Thu, 10 Apr 2014 14:43:17 +0000 (14:43 +0000)]
x86: try harder to attach block2mtd to fix boot issues on devices with longer delays
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40444
Felix Fietkau [Thu, 10 Apr 2014 11:31:21 +0000 (11:31 +0000)]
netifd: fix a regression related to ppp + multiple updates (ipv4 + ipv6)
Fixes #15504
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40443
Imre Kaloz [Thu, 10 Apr 2014 11:09:27 +0000 (11:09 +0000)]
specify the adapter type for the vmdk conversion
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40442
Felix Fietkau [Thu, 10 Apr 2014 08:52:33 +0000 (08:52 +0000)]
mac80211: add back missing tx power handling fix (#12750)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40440
John Crispin [Thu, 10 Apr 2014 08:14:33 +0000 (08:14 +0000)]
lantiq: move the dsl-modem config to network.@dsl-modem[-1]
make sure uci_defaults generates a proper uci config for the v/adsl modem
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40439
John Crispin [Wed, 9 Apr 2014 16:36:28 +0000 (16:36 +0000)]
lantiq: vdsl init.d script should auto start
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40438
John Crispin [Wed, 9 Apr 2014 16:31:24 +0000 (16:31 +0000)]
lantiq: cleanup vdsl driver bringup
config interface 'wan'
# a, b, j
option annex b
# a, b, av, bv
option tone b
# vdsl.bin
option firmware
# atm, ptm
option xfer_mode atm
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40437
John Crispin [Wed, 9 Apr 2014 16:31:14 +0000 (16:31 +0000)]
lantiq: make dsl_notify.sh executable
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40436
Steven Barth [Wed, 9 Apr 2014 12:29:43 +0000 (12:29 +0000)]
odhcpd: use correct defaults for interfaces not in UCI
SVN-Revision: 40435
Imre Kaloz [Wed, 9 Apr 2014 11:54:44 +0000 (11:54 +0000)]
enable native KVM and VMware drivers
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40434
Imre Kaloz [Wed, 9 Apr 2014 11:46:18 +0000 (11:46 +0000)]
upgrade to 3.14
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40433
Steven Barth [Wed, 9 Apr 2014 06:57:04 +0000 (06:57 +0000)]
odhcp6c: fix recovering from status where all addresses have been lost
SVN-Revision: 40432
Felix Fietkau [Tue, 8 Apr 2014 22:11:27 +0000 (22:11 +0000)]
mac80211: fix warnings triggered by tx power changes when using WDS AP (#15491)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40430
Felix Fietkau [Tue, 8 Apr 2014 22:11:23 +0000 (22:11 +0000)]
mac80211: fix user antenna gain calculation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40429
Felix Fietkau [Tue, 8 Apr 2014 22:11:19 +0000 (22:11 +0000)]
ath9k: fix AP mode crash issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40428
Felix Fietkau [Tue, 8 Apr 2014 22:11:13 +0000 (22:11 +0000)]
ath9k: fix some ANI related stability issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40427
Felix Fietkau [Tue, 8 Apr 2014 21:17:49 +0000 (21:17 +0000)]
base-files: add back missing function for find_mtd_part to /lib/functions.sh (fixes #15496)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40426
Hauke Mehrtens [Tue, 8 Apr 2014 19:51:36 +0000 (19:51 +0000)]
brcm47xx: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40425
Hauke Mehrtens [Tue, 8 Apr 2014 19:50:17 +0000 (19:50 +0000)]
kernel: bgmac: rework patch checking packet length
This bgmac patch was an attempt to fix/workaround bug reported in
https://dev.openwrt.org/ticket/7198 noticed on WNR3500L.
Patch assumed length reported by the hardware was 0 and was trying to
read it until getting a different value. This was actually the opposite.
Lenghts were some invalid & huge values that resulted in skb_over_panic.
For example:
skbuff: skb_over_panic: text:
83b21074 len:57222 (...)
skbuff: skb_over_panic: text:
87af1024 len:43226 (...)
skbuff: skb_over_panic: text:
87af5024 len:8739 (...)
So instead of that not-working patch checking for 0, write a new one
checking for huge values. In case something like that happens, dump
hardware state and drop the packet.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 40424
Steven Barth [Tue, 8 Apr 2014 06:19:37 +0000 (06:19 +0000)]
ds-lite: compatibility with ISPs that only offer public PDs
SVN-Revision: 40422
Steven Barth [Tue, 8 Apr 2014 05:24:36 +0000 (05:24 +0000)]
OpenSSL: update to 1.0.1g
This fixes the Heartbleed bug (CVE-2014-0160).
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 40421
John Crispin [Mon, 7 Apr 2014 15:35:20 +0000 (15:35 +0000)]
base-files: the ubi tol should be installed when jumping to ram_fs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40420
John Crispin [Mon, 7 Apr 2014 15:10:26 +0000 (15:10 +0000)]
ralink: fix WHR-300HP2 mtd size
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40419
John Crispin [Mon, 7 Apr 2014 15:10:22 +0000 (15:10 +0000)]
lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware
this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40418
John Crispin [Mon, 7 Apr 2014 15:10:18 +0000 (15:10 +0000)]
kernel: add a ubi forced detach ioctl
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40417
John Crispin [Mon, 7 Apr 2014 15:10:15 +0000 (15:10 +0000)]
base-files: make use of new fstools
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40416
John Crispin [Mon, 7 Apr 2014 15:10:07 +0000 (15:10 +0000)]
fstools: update to latest git HEAD
this adds the /sbin/ubi tool that can be used for sysupgrading ubi volumes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40415
Felix Fietkau [Mon, 7 Apr 2014 11:12:06 +0000 (11:12 +0000)]
netifd: update to the latest version, fixes a l3_dev handling regression leading to a crash
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40414
Felix Fietkau [Mon, 7 Apr 2014 10:44:52 +0000 (10:44 +0000)]
ar71xx: move some always-used led related functionality from kmod packages to the kernel image
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40413
Felix Fietkau [Mon, 7 Apr 2014 10:29:51 +0000 (10:29 +0000)]
/lib/functions.sh: remove config_rename()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40412
Felix Fietkau [Mon, 7 Apr 2014 10:29:47 +0000 (10:29 +0000)]
/lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functions/system.sh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40411
Felix Fietkau [Mon, 7 Apr 2014 10:29:42 +0000 (10:29 +0000)]
/lib/functions.sh: remove jffs2_mark_erase()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40410
Felix Fietkau [Mon, 7 Apr 2014 10:01:59 +0000 (10:01 +0000)]
base-files: remove config_clear() and list_remove()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40409
Felix Fietkau [Mon, 7 Apr 2014 10:01:54 +0000 (10:01 +0000)]
base-files: move uci_apply_defaults() to /etc/init.d/boot
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40408
Felix Fietkau [Mon, 7 Apr 2014 09:50:26 +0000 (09:50 +0000)]
/lib/functions.sh: remove hotplug_dev()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40406
Felix Fietkau [Mon, 7 Apr 2014 09:50:23 +0000 (09:50 +0000)]
/lib/functions.sh: remove strtok()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40405
Felix Fietkau [Mon, 7 Apr 2014 09:50:19 +0000 (09:50 +0000)]
/lib/functions.sh: move preinit related functions to /lib/functions/preinit.sh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40404
Felix Fietkau [Mon, 7 Apr 2014 09:50:15 +0000 (09:50 +0000)]
/lib/functions.sh: remove pi_include()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40403
Felix Fietkau [Mon, 7 Apr 2014 09:50:11 +0000 (09:50 +0000)]
/lib/functions.sh: remove jffs2_ready()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40402
Felix Fietkau [Mon, 7 Apr 2014 09:50:07 +0000 (09:50 +0000)]
/lib/functions.sh: remove support for non-overlayfs overlay fopivot types
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40401
Felix Fietkau [Mon, 7 Apr 2014 08:00:02 +0000 (08:00 +0000)]
ar71xx: add support for the TP-LINK TL-WR841N/ND v9
Everything seems to be working fine. Potential issues:
* VLAN port IDs are reversed with regard to the numbers on the case.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 40400
Felix Fietkau [Mon, 7 Apr 2014 07:59:45 +0000 (07:59 +0000)]
ar71xx: add support for QCA953x SoC
I don't have access to the specs, so I'm not sure about every detail, but I
haven't seen any problems with my test system, a TL-WR841N v9. It looks pretty
much like a QCA955x without PCI, a little twist in the clock calculation and
a AR9331-compatible switch.
Features not yet supported:
* EHCI (my test system doesn't have USB)
* ? (I have no idea if the QCA953x has any other features I don't know about
that aren't used by the TL-WR841N v9)
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 40399
Jonas Gorski [Sun, 6 Apr 2014 22:03:42 +0000 (22:03 +0000)]
brcm63xx: hack around jffs2 corruption with SMP
mempy_fromio seems to be randomly failing when the destination is
unaligned; work around it by forcing the name to be aligned in memory.
Should fix jffs2 and SMP for now, but needs to be some additional
looking into as it does not fix the source.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40396
Steven Barth [Sun, 6 Apr 2014 14:34:45 +0000 (14:34 +0000)]
odhcpd: improve managed PD
SVN-Revision: 40395
Felix Fietkau [Sun, 6 Apr 2014 12:13:55 +0000 (12:13 +0000)]
hostapd: update to version 2014-04-04
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40394
Felix Fietkau [Sun, 6 Apr 2014 10:41:23 +0000 (10:41 +0000)]
mac80211: update to wireless-testing 2014-03-31
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40393
John Crispin [Sun, 6 Apr 2014 09:21:44 +0000 (09:21 +0000)]
lantiq: remove unmaintained code
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40392
Felix Fietkau [Sun, 6 Apr 2014 00:09:50 +0000 (00:09 +0000)]
ramips: fix regression from r39949 (#15382)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40391
Felix Fietkau [Sat, 5 Apr 2014 21:58:16 +0000 (21:58 +0000)]
uclibc++: disable mips16 support to avoid linkage errors with libsupc++ object files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40390
Jonas Gorski [Sat, 5 Apr 2014 18:32:34 +0000 (18:32 +0000)]
brcm63xx: sync mips counters during bringup of cpus
Fixes gettimeofday returning different values depending on which cpu
it is called.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40387
Felix Fietkau [Sat, 5 Apr 2014 18:17:25 +0000 (18:17 +0000)]
odhcp6c: Add renew handler for proto dhcpv6
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 40386
Felix Fietkau [Sat, 5 Apr 2014 18:17:22 +0000 (18:17 +0000)]
netifd: Add renew handler for proto dhcp
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 40385
Felix Fietkau [Sat, 5 Apr 2014 18:17:18 +0000 (18:17 +0000)]
netifd: update to latest version, fixes issues when l3 interface changes on reload (e.g. ppp -> dhcp/static)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40384
John Crispin [Sat, 5 Apr 2014 16:34:40 +0000 (16:34 +0000)]
fstools: scripts should propagate the cmdline
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 40383
John Crispin [Sat, 5 Apr 2014 16:34:30 +0000 (16:34 +0000)]
ubi-utils: fix git tree path, a regex went mad
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40382
John Crispin [Sat, 5 Apr 2014 16:34:20 +0000 (16:34 +0000)]
lantiq: cleanup the dsl control scripts
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40381
Jonas Gorski [Fri, 4 Apr 2014 10:17:08 +0000 (10:17 +0000)]
brcm63xx: update development kernel to linux 3.14
Now that 3.13 will be EOL soon, switch to 3.14.
Known issues:
* 74x164 is not available because upstream dropped non-DT support
* jffs2 breaks with SMP
Unknown issues:
* probably plenty
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40380
Jonas Gorski [Fri, 4 Apr 2014 10:16:54 +0000 (10:16 +0000)]
kernel: fix bluetooth and zsmalloc for 3.14
zsmalloc was promoted from staging, while bluetooth gained a dependency
to a library shared with 802.15.4 for 6lowpan support.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40379
Jonas Gorski [Fri, 4 Apr 2014 10:16:52 +0000 (10:16 +0000)]
kernel: fix usb module paths for 3.14
dwc2 was promoted from staging, while u_rndis was merged into
usb_f_rndis.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40378
Jonas Gorski [Fri, 4 Apr 2014 10:16:50 +0000 (10:16 +0000)]
kernel: fix kmod-sound-core for 3.14
pcm-page-alloc was merged into snd-pcm.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40377
Jonas Gorski [Fri, 4 Apr 2014 10:16:49 +0000 (10:16 +0000)]
kernel: make sched_act_connmark compile for 3.14
The upstream API changed, which allowed to simplify the code a bit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40376
Jonas Gorski [Fri, 4 Apr 2014 10:16:47 +0000 (10:16 +0000)]
kernel: make sched_esfq compile for 3.14
net_random was replaced with prandom_u32.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40375
Jonas Gorski [Fri, 4 Apr 2014 10:16:44 +0000 (10:16 +0000)]
kernel: add missing config symbol for linux 3.14
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40374
John Crispin [Thu, 3 Apr 2014 14:27:02 +0000 (14:27 +0000)]
lantiq: nand fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40372
John Crispin [Thu, 3 Apr 2014 14:26:58 +0000 (14:26 +0000)]
lantiq: BT Home Hub 2B support - userspace
Basic userspace configuration for BT Home Hub 2B
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40371
John Crispin [Thu, 3 Apr 2014 14:26:54 +0000 (14:26 +0000)]
lantiq: BT Home Hub 2B support - board support
Board support patch for BT Home Hub 2B
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40370
John Crispin [Thu, 3 Apr 2014 14:26:50 +0000 (14:26 +0000)]
lantiq: BT Home Hub 2B support - jedec probe
Lantiq nor patch. Adds support for jedec probing if cfi
probing fails.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40369
John Crispin [Thu, 3 Apr 2014 14:26:46 +0000 (14:26 +0000)]
lantiq: make td8970 wifi led work
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40368
John Crispin [Thu, 3 Apr 2014 14:26:42 +0000 (14:26 +0000)]
ubi-utils: mini version of mtd-utils that only includes ubi tools
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40367
John Crispin [Thu, 3 Apr 2014 14:26:38 +0000 (14:26 +0000)]
fstools: update to latest git
this fixes ubifs and ubi overlay support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40366
projects / openwrt / staging / ynezz.git / log