Gabor Juhos [Thu, 13 Sep 2012 07:26:25 +0000 (07:26 +0000)]
ar71xx: add device registration code for the AR934x NAND flash controller
SVN-Revision: 33387
Gabor Juhos [Thu, 13 Sep 2012 07:26:23 +0000 (07:26 +0000)]
ar71xx: package the AR934x NAND driver module
SVN-Revision: 33386
Gabor Juhos [Thu, 13 Sep 2012 07:26:22 +0000 (07:26 +0000)]
ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
SVN-Revision: 33385
Gabor Juhos [Thu, 13 Sep 2012 07:26:21 +0000 (07:26 +0000)]
generic: add MTD_NAND_AR934X symbol
SVN-Revision: 33384
Gabor Juhos [Thu, 13 Sep 2012 06:38:31 +0000 (06:38 +0000)]
generic: move GENERIC_PWM symbol into the generic config
SVN-Revision: 33383
Gabor Juhos [Wed, 12 Sep 2012 19:06:38 +0000 (19:06 +0000)]
ar71xx: define NAND controller base address and register size for AR934X/QCA955x
SVN-Revision: 33382
Gabor Juhos [Wed, 12 Sep 2012 19:03:12 +0000 (19:03 +0000)]
ramips/rt305x: add initial support for Rt5350 SoC
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33381
Jo-Philipp Wich [Wed, 12 Sep 2012 10:09:55 +0000 (10:09 +0000)]
mountd: add "-f" option to not daemonize mountd, use service wrappers in init script
SVN-Revision: 33378
Hauke Mehrtens [Tue, 11 Sep 2012 15:04:20 +0000 (15:04 +0000)]
add gpio sysfs entries
This fixes #10256
SVN-Revision: 33369
Gabor Juhos [Mon, 10 Sep 2012 14:38:01 +0000 (14:38 +0000)]
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x
SVN-Revision: 33362
Gabor Juhos [Mon, 10 Sep 2012 14:32:54 +0000 (14:32 +0000)]
ar71xx: fix QCA955X_EHCI_SIZE
SVN-Revision: 33360
Jo-Philipp Wich [Mon, 10 Sep 2012 12:23:41 +0000 (12:23 +0000)]
hostapd: introduce new default-off option "auth_cache" which controls PMKSA and Opportunistic Key Caching (#12129)
SVN-Revision: 33359
Jo-Philipp Wich [Mon, 10 Sep 2012 09:48:31 +0000 (09:48 +0000)]
block-mount: additionally try to umount disk by mountpoint (#12056)
SVN-Revision: 33357
Florian Fainelli [Mon, 10 Sep 2012 08:53:21 +0000 (08:53 +0000)]
fix ixp4xx_hss build failure (#12162)
SVN-Revision: 33356
Jo-Philipp Wich [Sun, 9 Sep 2012 22:37:32 +0000 (22:37 +0000)]
fix library bundling when host libraries reside in /lib/tls/ or similar
SVN-Revision: 33353
Jo-Philipp Wich [Sun, 9 Sep 2012 21:40:26 +0000 (21:40 +0000)]
fix description of nand/Ath5k profile (#12149)
SVN-Revision: 33352
Jo-Philipp Wich [Sun, 9 Sep 2012 21:35:42 +0000 (21:35 +0000)]
do not pass optimization flags in HOST_CPPFLAGS (#12153)
SVN-Revision: 33351
Jo-Philipp Wich [Sun, 9 Sep 2012 19:46:38 +0000 (19:46 +0000)]
comgt: fix 3g redialling if dongle is physically reattached (#11567, #12008)
SVN-Revision: 33350
Gabor Juhos [Sun, 9 Sep 2012 14:05:32 +0000 (14:05 +0000)]
ar71xx: add initial support for RB2011UAS-2HnD
SVN-Revision: 33349
Gabor Juhos [Sun, 9 Sep 2012 14:05:30 +0000 (14:05 +0000)]
ar71xx: use routerboot_find_tag to find wlan data offset on RB751
SVN-Revision: 33348
Gabor Juhos [Sun, 9 Sep 2012 14:05:28 +0000 (14:05 +0000)]
ar71xx: add RouterBoot related helper routines
SVN-Revision: 33347
Gabor Juhos [Sun, 9 Sep 2012 14:05:26 +0000 (14:05 +0000)]
generic add WLAN calibration data ID to routerboot.h
SVN-Revision: 33346
Gabor Juhos [Sun, 9 Sep 2012 14:05:24 +0000 (14:05 +0000)]
ar71xx: define MTD partitions for RB2011
SVN-Revision: 33345
Gabor Juhos [Sun, 9 Sep 2012 14:05:22 +0000 (14:05 +0000)]
ar71xx: add preliminary support for Mikrotik RB2011L
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.
[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 33344
Gabor Juhos [Sun, 9 Sep 2012 14:05:20 +0000 (14:05 +0000)]
ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
SVN-Revision: 33343
Gabor Juhos [Sun, 9 Sep 2012 14:05:17 +0000 (14:05 +0000)]
ar71xx: add dynamic MDIO clock calculation
SVN-Revision: 33342
Gabor Juhos [Sun, 9 Sep 2012 11:55:42 +0000 (11:55 +0000)]
adm5120: move common routerboot definitions into a separate header file
Those will be used on the ar71xx platform as well.
SVN-Revision: 33341
Jonas Gorski [Sun, 9 Sep 2012 11:54:56 +0000 (11:54 +0000)]
bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi
Fixes booting the device with button hotplug enabled (#10785).
SVN-Revision: 33340
Gabor Juhos [Sat, 8 Sep 2012 17:51:56 +0000 (17:51 +0000)]
ar71xx: use the RLE library for RB751
SVN-Revision: 33338
Gabor Juhos [Sat, 8 Sep 2012 17:51:54 +0000 (17:51 +0000)]
ar71xx: add library code for RLE decoding
It will be used for the MikroTik boards.
SVN-Revision: 33337
Gabor Juhos [Sat, 8 Sep 2012 13:39:09 +0000 (13:39 +0000)]
ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x
SVN-Revision: 33335
Gabor Juhos [Sat, 8 Sep 2012 13:39:04 +0000 (13:39 +0000)]
ar71xx: refresh kernel patches
SVN-Revision: 33334
Felix Fietkau [Sat, 8 Sep 2012 13:19:21 +0000 (13:19 +0000)]
mac80211: bump PKG_RELEASE
SVN-Revision: 33333
Felix Fietkau [Sat, 8 Sep 2012 13:18:58 +0000 (13:18 +0000)]
ath9k: disable PA predistortion by default, since it has been reported to reduce rx sensitivity on some devices (#12135)
SVN-Revision: 33332
Felix Fietkau [Sat, 8 Sep 2012 11:10:54 +0000 (11:10 +0000)]
mac80211: update to 2012-09-07, adds ath9k beacon fixes, mesh/adhoc fixes, and more
SVN-Revision: 33331
Florian Fainelli [Sat, 8 Sep 2012 09:51:05 +0000 (09:51 +0000)]
use the recommended ARM I/O accessors
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.
SVN-Revision: 33330
Florian Fainelli [Fri, 7 Sep 2012 10:31:58 +0000 (10:31 +0000)]
gcc: add upstream fixes for GCC bug 54494
See: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54494 for more infos.
SVN-Revision: 33329
Florian Fainelli [Fri, 7 Sep 2012 10:31:54 +0000 (10:31 +0000)]
gcc: add upstream fixes for GCC bug 54369
See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54369 for more infos.
SVN-Revision: 33328
Daniel Dickinson [Thu, 6 Sep 2012 18:15:26 +0000 (18:15 +0000)]
dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
SVN-Revision: 33326
Felix Fietkau [Thu, 6 Sep 2012 15:05:30 +0000 (15:05 +0000)]
netifd: update to latest version, fixes premature device release on link loss (fixes #12114, #12112, #11959)
SVN-Revision: 33325
Luka Perkov [Thu, 6 Sep 2012 00:09:46 +0000 (00:09 +0000)]
lantiq: fix sx76x default uci network configuration
SVN-Revision: 33324
Florian Fainelli [Wed, 5 Sep 2012 20:19:29 +0000 (20:19 +0000)]
add some ohci workarounds to make ohci work
SVN-Revision: 33323
Gabor Juhos [Wed, 5 Sep 2012 20:08:43 +0000 (20:08 +0000)]
ramips: Add missing andmask to ramips_esw register read for recv_good value.
Add missing andmask to ramips_esw register read for recv_good value.
Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33322
Gabor Juhos [Wed, 5 Sep 2012 20:08:42 +0000 (20:08 +0000)]
ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable.
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.
Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.
Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.
Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.
I did some tests regarding maximum packet size and did not see any
difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33321
John Crispin [Wed, 5 Sep 2012 19:38:42 +0000 (19:38 +0000)]
add missing kvm_guest kernel options
SVN-Revision: 33319
Gabor Juhos [Wed, 5 Sep 2012 19:26:50 +0000 (19:26 +0000)]
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
SVN-Revision: 33318
Gabor Juhos [Wed, 5 Sep 2012 19:22:51 +0000 (19:22 +0000)]
ar71xx: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33317
Gabor Juhos [Wed, 5 Sep 2012 19:22:48 +0000 (19:22 +0000)]
ramips: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33316
Florian Fainelli [Mon, 3 Sep 2012 20:25:51 +0000 (20:25 +0000)]
enable CFI command set 0002 FORCE_WORD_WRITE
SVN-Revision: 33315
Florian Fainelli [Mon, 3 Sep 2012 20:25:46 +0000 (20:25 +0000)]
pad squashfs image
SVN-Revision: 33314
Florian Fainelli [Mon, 3 Sep 2012 20:25:40 +0000 (20:25 +0000)]
add Generic and dLAN USB Extender profiles
SVN-Revision: 33313
Florian Fainelli [Mon, 3 Sep 2012 10:26:01 +0000 (10:26 +0000)]
nuport-mac: disable MAC RX and TX during interface close
Fixes sporadic crashes while reconfiguring the network interface.
SVN-Revision: 33312
Felix Fietkau [Wed, 29 Aug 2012 16:06:24 +0000 (16:06 +0000)]
hostapd: fix ap+sta issues
SVN-Revision: 33311
Gabor Juhos [Wed, 29 Aug 2012 10:37:55 +0000 (10:37 +0000)]
Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
That was based on assumptions.
SVN-Revision: 33310
Gabor Juhos [Wed, 29 Aug 2012 10:37:54 +0000 (10:37 +0000)]
ar71xx: all0315n: fix ethernet according to vendor info
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33309
Gabor Juhos [Wed, 29 Aug 2012 10:37:53 +0000 (10:37 +0000)]
ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
SVN-Revision: 33308
Gabor Juhos [Wed, 29 Aug 2012 10:37:51 +0000 (10:37 +0000)]
ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
SVN-Revision: 33307
Gabor Juhos [Wed, 29 Aug 2012 10:37:49 +0000 (10:37 +0000)]
iwinfo: add hwinfo of AR9280 2T2R PCIe
SVN-Revision: 33306
Gabor Juhos [Wed, 29 Aug 2012 10:37:47 +0000 (10:37 +0000)]
ramips: make built-in switch transparent for ALL0256N and ALL5002
This allows them to transparently communicate with an external VLAN switch.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33305
Gabor Juhos [Wed, 29 Aug 2012 10:37:45 +0000 (10:37 +0000)]
ramips: Power down phy on disabled switch ports
Power down phy on disabled switch ports.
Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.
[juhosg: fix checkpatch warning]
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33304
Gabor Juhos [Wed, 29 Aug 2012 10:37:43 +0000 (10:37 +0000)]
ramips: Add support for 8devices Carambola dev board.
Add support for 8devices Carambola dev board.
The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33303
Gabor Juhos [Wed, 29 Aug 2012 10:37:41 +0000 (10:37 +0000)]
ramips: Rename POC registers
Rename POC registers.
The current code uses POC1-POC3.
The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2
So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33302
Gabor Juhos [Wed, 29 Aug 2012 10:37:40 +0000 (10:37 +0000)]
ramips: Minor ramips_esw.c cleanup
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33301
Gabor Juhos [Wed, 29 Aug 2012 10:37:38 +0000 (10:37 +0000)]
ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.
The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33300
Gabor Juhos [Wed, 29 Aug 2012 10:37:36 +0000 (10:37 +0000)]
ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c
This patch adds swconfig support for ramips_esw:
Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.
The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33299
Gabor Juhos [Wed, 29 Aug 2012 10:37:35 +0000 (10:37 +0000)]
ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.
Prepare for the main swconfig patch by cleaning up indentation a bit.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33298
Gabor Juhos [Wed, 29 Aug 2012 10:37:33 +0000 (10:37 +0000)]
mac80211/rt2800: integrate cosmetic changes in rt3352 support
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33297
Gabor Juhos [Wed, 29 Aug 2012 10:37:32 +0000 (10:37 +0000)]
uboot-envtools: add configration for ramips devices
uboot-env settings for ALL0239-3G, ALL0256N, ALL5002.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33296
Gabor Juhos [Wed, 29 Aug 2012 10:37:30 +0000 (10:37 +0000)]
ar71xx: image: fix Profile name for TL-WA701 (closes #12094)
SVN-Revision: 33295
Gabor Juhos [Wed, 29 Aug 2012 10:11:55 +0000 (10:11 +0000)]
ar71xx: Buffalo WZR-HP-AG300H LED support
An improved LED support for Buffalo WZR-HP-AG300H.
There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.
[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 33294
Jo-Philipp Wich [Wed, 29 Aug 2012 10:10:46 +0000 (10:10 +0000)]
iwinfo: add hwinfo for Rt3050 and maintain alphabetic order
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33293
John Crispin [Wed, 29 Aug 2012 10:08:30 +0000 (10:08 +0000)]
revert threadsafe patch
SVN-Revision: 33292
Jo-Philipp Wich [Wed, 29 Aug 2012 10:07:08 +0000 (10:07 +0000)]
ppp: introduce "authfail" option which specifies whether pppd should attempt to re-authenticate after a failed PAP/CHAP auth
SVN-Revision: 33291
Felix Fietkau [Wed, 29 Aug 2012 08:16:34 +0000 (08:16 +0000)]
ath9k: add fix to improve reliability of powersave clients
SVN-Revision: 33290
Felix Fietkau [Wed, 29 Aug 2012 08:16:31 +0000 (08:16 +0000)]
mac80211: reorganize patches
SVN-Revision: 33289
Gabor Juhos [Mon, 27 Aug 2012 18:09:57 +0000 (18:09 +0000)]
gemini: fix bus ids for PHY devices (closes: #12082)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33288
Gabor Juhos [Mon, 27 Aug 2012 14:55:38 +0000 (14:55 +0000)]
ar71xx: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33287
Gabor Juhos [Mon, 27 Aug 2012 14:55:37 +0000 (14:55 +0000)]
ar71xx: generate image for ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33286
Gabor Juhos [Mon, 27 Aug 2012 14:55:36 +0000 (14:55 +0000)]
ar71xx: sysupgrade for the ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33285
Gabor Juhos [Mon, 27 Aug 2012 14:55:35 +0000 (14:55 +0000)]
ar71xx: rename all0258n.sh to allnet.sh
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33284
Gabor Juhos [Mon, 27 Aug 2012 14:55:33 +0000 (14:55 +0000)]
uboot-envtools: add configuration for ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33283
Gabor Juhos [Mon, 27 Aug 2012 14:55:32 +0000 (14:55 +0000)]
ar71xx: detect ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33282
Gabor Juhos [Mon, 27 Aug 2012 14:55:31 +0000 (14:55 +0000)]
ar71xx: add support for the Allnet ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33281
Gabor Juhos [Mon, 27 Aug 2012 14:55:26 +0000 (14:55 +0000)]
ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33280
Felix Fietkau [Mon, 27 Aug 2012 12:23:25 +0000 (12:23 +0000)]
mac80211: fix a crash on accessing stale skb->dev references
SVN-Revision: 33279
Felix Fietkau [Mon, 27 Aug 2012 11:10:36 +0000 (11:10 +0000)]
ath9k: fix PA predistortion training, fixes hang issues and most likely also fixes #12073
SVN-Revision: 33278
Felix Fietkau [Mon, 27 Aug 2012 11:07:23 +0000 (11:07 +0000)]
ath9k: add a patch to fix ASPM related issues
SVN-Revision: 33277
Felix Fietkau [Sun, 26 Aug 2012 20:47:39 +0000 (20:47 +0000)]
madwifi: add mirror md5sum to fix issue with the disappeared svn repo (#12084)
SVN-Revision: 33276
Gabor Juhos [Sun, 26 Aug 2012 09:27:56 +0000 (09:27 +0000)]
generic: add support for the EON EN25Q64 SPI flash chip
It is used in some TL-WDR4310 devices. Closes #12077.
SVN-Revision: 33275
Gabor Juhos [Sun, 26 Aug 2012 08:15:11 +0000 (08:15 +0000)]
ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
Commit
48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.
The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.
Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:
for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
grep -q ,$i, Makefile || echo $i;
done > missing-boards.new
Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33274
John Crispin [Sun, 26 Aug 2012 06:31:04 +0000 (06:31 +0000)]
add missin -lpthread to the util - build bots spotted this
SVN-Revision: 33273
Gabor Juhos [Sun, 26 Aug 2012 06:30:37 +0000 (06:30 +0000)]
ar71xx: image: fix TL-WR1043ND board id (#12079)
SVN-Revision: 33272
Gabor Juhos [Fri, 24 Aug 2012 10:01:01 +0000 (10:01 +0000)]
package/util-linux: don't lie about availability of '%ms' scanf modifier
Use a patch from gentoo which allows building libmount even
if the C library does not supports %ms/%as.
See: https://bugs.gentoo.org/406303
SVN-Revision: 33270
John Crispin [Fri, 24 Aug 2012 09:58:42 +0000 (09:58 +0000)]
add safethread
SVN-Revision: 33269
John Crispin [Fri, 24 Aug 2012 06:15:06 +0000 (06:15 +0000)]
Enable eSATA sheevaplug
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.
Signed-off-by: Unai Uribarri <unaiur@gmail.com>
SVN-Revision: 33266
Gabor Juhos [Thu, 23 Aug 2012 14:27:36 +0000 (14:27 +0000)]
package/uboot-envtools: always install the fw_setenv symlink
It is required by sysupgrade on some boards, and it is only
working if a suitable /etc/fw_env.config is present on the
target board. If an user creates such configuration he/she
should know that it is a dangerous tool. The devices can
be bricked in several other ways anyway.
SVN-Revision: 33265
Gabor Juhos [Thu, 23 Aug 2012 13:17:47 +0000 (13:17 +0000)]
ar71xx: image: group and sort {Single,Multi}Profiles
SVN-Revision: 33264
Gabor Juhos [Thu, 23 Aug 2012 13:14:35 +0000 (13:14 +0000)]
ar71xx: image: group and sort mtdlayout definitions
SVN-Revision: 33263
Gabor Juhos [Thu, 23 Aug 2012 13:11:25 +0000 (13:11 +0000)]
ar71xx: image: use the MultiProfile helper for the Madwifi profile
SVN-Revision: 33262
Gabor Juhos [Thu, 23 Aug 2012 13:08:15 +0000 (13:08 +0000)]
ar71xx: image: automatically build a list of SingleProfiles
Use that for Default/Minimal profiles.
SVN-Revision: 33261
projects / openwrt / staging / svanheule.git / log