Staging: rtl8723bs: Use kzfree rather than its implementation

Use kzfree instead of memset() + kfree().

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Link: https://lore.kernel.org/r/1567566079-7412-4-git-send-email-zhongjiang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-5.4b-take3' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, cleanups and features for IIO in the 5.4 cycle

Revised pull request to fix up a missing Signed-off-by and roll in
a fix in the lsm9ds1 support after I broke it when applying.
Revised again because the fix changed a hash meaning a fix
that previously followed it now had the wrong fixes tag.

A few fixes in here that could have gone a faster path but aren't quite
worth the rush for 5.3.

New device support
* ad7606
  - Support the ad7606b which adds a software controlled mode alongside
    the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
  - Add support for the gyro and accelerometer part of the lsm9ds1 which is
    a compound device also including a magnetometer (st_sensors driver).
    Includes bindings and precursor rework of the driver.

Features
* ad7192
  - Add support for low pass filter control.
  - DT binding docs.

Cleanups and minor fixes
* MAINTAINERS
  - Fix a typo in a path.
  - Add entry for ad7606
* ad5380
  - Fix a failure to dereference a pointer before atempting to assign the
    value.
* ad7192
  - Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
  - YAML conversion for dt-bindings.
* adis16240
  - Rework write_raw to make it more readable using GENMASK.
* adis16460
  - Fix and issue with an unsigned variable holding potential negatives.
* cros_ec
  - Fix missing default of calibration vector so that we get 'something'
    before calibration is complete on a given axis.
* hid-sensors
  - Use int_pow instead of opencoding.
* isl29501
  - rename dt-binding docs to include renesas inline with other renesas parts
    and general current convention.
* kxcjk1013
  - Improve comments on the 'unusual' ACPI ids used to identify which sensor
    is which in certain laptops.
* lsm6dsx
  - Add one bit to the fifo status masks for a number of parts.
  - Drop a reserved entry from the sensitivity values to tidy up interface.
  - Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
    to relate to the datasheet and consistent with other parts supported.
* max1027
  - Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
  - Typo in Kconfig help.
* sc27xx
  - Switch to polling mode from interrupts as interrupt handling typically
    to slow for very short sleeps.
* st-sensors
  - Fix some missing selects for regmap.
* tools
  - Add a .gitignore containing the binary outputs.

* tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
  iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
  iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  iio: cros_ec: set calibscale for 3d MEMS to unit vector
  iio: dac: ad5380: fix incorrect assignment to val
  iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
  dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1
  iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct
  iio: imu: st_lsm6dsx: introduce update_fifo function pointer
  dt-bindings: iio: light: isl29501: Rename bindings documentation file
  Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
  iio: st_sensors: Fix build error
  dt-bindings: iio: adc: Add AD7606B ADC documentation
  dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  MAINTAINERS: Add Beniamin Bia for AD7606 driver
  iio: adc: ad7606: Add support for AD7606B ADC
  tools: iio: add .gitignore
  iio: adc: sc27xx: Change to polling mode to read data
  iio: hid-sensor-attributes: Convert to use int_pow()
  iio: adc: max1027: Use device-managed APIs
  ...

iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1

Rely on IIO_G_TO_M_S_2 macro for LSM9DS1 accelerometer gain definitions

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1

Get rid of invalid sensitivity value for LSM9DS1 gyro sensor

Fixes: 52f4b1f19679 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: exfat: drop local TRUE/FALSE defines

Replace with bool where it makes sense. Also drop unused local
variable lossy in fat_find_dir_entry.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20190903185537.25099-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: fix spelling errors in comments

Fixes checkpatch.pl warnings:

  CHECK: 'consistancy' may be misspelled - perhaps 'consistency'?
  CHECK: 'stuct' may be misspelled - perhaps 'struct'?

Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20190903165408.16010-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: cleanup braces for if/else statements

Fixes checkpatch.pl warnings:

  CHECK: Unbalanced braces around else statement
  CHECK: braces {} should be used on all arms of this statement

Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20190903164732.14194-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: cros_ec: set calibscale for 3d MEMS to unit vector

By default, set the calibscale vector to unit vector.
When calibrating one axis, the other axis calibrations  are sent as well.
If left to 0, sensor data from uncalibrated axis are zero'ed out until
all axis are calibrated.

Fixes: ed1f2e85da79 ("iio: cros_ec: Add calibscale for 3d MEMS ")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ad5380: fix incorrect assignment to val

Currently the pointer val is being incorrectly incremented
instead of the value pointed to by val. Fix this by adding
in the missing * indirection operator.

Addresses-Coverity: ("Unused value")
Fixes: c03f2c536818 ("staging:iio:dac: Add AD5380 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo

According to the latest version of datasheet the mask
for number of unread sensor data in FIFO_STATUS registers
has been extended to 10 bits

The devices involved are:
 - LSM6DSO
 - LSM6DSOX
 - ASM330LHH
 - LSM6DSR
 - ISM330DHCX

Signed-off-by: mario tesi <mario.tesi@st.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings

Note the binding is st,lsm9ds1-imu.  This device is effectively
two separate devices in the same package. (separate addreses,
chip selects etc) The magnetometer is already supported
as lsm9ds1-mag.  imu may not be the best name but it's the best
that anyone has yet come up with for a gyro and accel part.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1

The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately
supported in iio/magnetometer/st_magn*) are located on a separate i2c addresses
on the bus.

For the datasheet, see https://www.st.com/resource/en/datasheet/lsm9ds1.pdf

Treat it just like the LSM6* devices and, despite it's name, hook it up
to the st_lsm6dsx driver, using it's basic functionality.

accelerometer and gyroscope are not independently clocked. It runs at the gyro
frequencies if both are enabled, see chapter 7.12 of the datasheet.
We could have handled this as a single IIO device but we have split
it up to be more consistent with the other more flexible devices.

Despite supporting and testing the LSM9DS1, we call the gyro channels
iio_chan_spec struct "st_lsm6ds0_gyro_channels" because the register
description is equal. This suggests that supporting LSM6DS0 should be
trivial to do.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: rtl8723bs: replace __inline by inline

Currently, __inline is #defined as inline in compiler_types.h, so this
should not change functionality. It is preparation for removing said
#define.

While at it, change some "inline static" to the customary "static
inline" order.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20190830231527.22304-2-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: use skb_put_data instead of skb_put/memcpy pair

skb_put_data is shorter and clear.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Link: https://lore.kernel.org/r/20190901195301.GA16043@alpha
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: kpc2000: Fix long constant sparse warning

It fixed following warning in kpc2000 driver
"constant XXXX is so big it is unsigned long"

Signed-off-by: Harsh Jain <harshjain32@gmail.com>
Link: https://lore.kernel.org/r/20190831115532.2398-1-harshjain32@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: check for null return from call to FAT_getblk

A call to FAT_getblk is missing a null return check which can
lead to a null pointer dereference.  Fix this by adding a null
check to match all the other FAT_getblk return sanity checks.

Addresses-Coverity: ("Dereference null return")
Fixes: c48c9f7ff32b ("staging: exfat: add exfat filesystem code to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190830175050.12706-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: light: fix a couple double frees

The problem is in gb_lights_request_handler().  If we get a request to
change the config then we release the light with gb_lights_light_release()
and re-allocated it.  However, if the allocation fails part way through
then we call gb_lights_light_release() again.  This can lead to a couple
different double frees where we haven't cleared out the original values:

gb_lights_light_v4l2_unregister(light);
...
kfree(light->channels);
kfree(light->name);

I also made a small change to how we set "light->channels_count = 0;".
The original code handled this part fine and did not cause a use after
free but it was sort of complicated to read.

Fixes: 2870b52bae4c ("greybus: lights: add lights implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20190829122839.GA20116@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Fix checkpath warning

This patch fixes the following checkpath warning
in the file drivers/staging/rts5208/rtsx_transport.c:546

WARNING: line over 80 characters
+                               option = RTSX_SG_VALID | RTSX_SG_END |
RTSX_SG_TRANS_DATA;

Signed-off-by: P SAI PRASANTH <saip2823@gmail.com>
Link: https://lore.kernel.org/r/20190831034926.GA17810@dell-inspiron
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Fixed checkpath warning.

This patch solves the following checkpatch.pl's message in drivers/staging/rts5208/rtsx_transport.c:397.

WARNING: line over 80 characters
+                               option = RTSX_SG_VALID | RTSX_SG_END | RTSX_SG_TRANS_DATA;

Signed-off-by: Prakhar Sinha <prakharsinha2808@gmail.com>
Link: https://lore.kernel.org/r/20190830121656.GA2740@MeraComputer
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: remove redundant sd30_mode checks

There are two hunks of code that check if sd30_mode is true however
an earlier check in an outer code block on sd30_mode being false means
that sd30_mode can never be true at these points so these checks are
redundant.  Remove the dead code.

Addresses-Coverity: ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190830081047.13630-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: remove return and error return via a goto

The return statement is incorrect, the error exit should be by
assigning ret with the error code and exiting via label out.
Thanks to Valdis Klētnieks for correcting my original fix.

Addresses-Coverity: ("Structurally dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190902094052.28029-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: fix uninitialized variable ret

Currently there are error return paths in ffsReadFile that
exit via lable err_out that return and uninitialized error
return in variable ret. Fix this by initializing ret to zero.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: c48c9f7ff32b ("staging: exfat: add exfat filesystem code to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>,
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20190830184644.15590-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: use BIT macro for defining sizes

Fixes checkpatch.pl warning:

  CHECK: Prefer using the BIT macro

Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20190902184319.11971-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: cleanup blank line warnings

Fixes checkpatch.pl warnings:

  CHECK: Please don't use multiple blank lines
  CHECK: Blank lines aren't necessary after an open brace '{'
  CHECK: Please use a blank line after function/struct/union/enum
         declarations

Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20190902190329.18685-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: make exfat depend on BLOCK

This should fix a build error in some configurations when CONFIG_BLOCK
is not selected.  Also properly set the dependancy for no FAT support at
the same time.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Link: https://lore.kernel.org/r/20190902174631.GB31445@kroah.com
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/exfat - by default, prohibit mount of fat/vfat

Concerns have been raised about the exfat driver accidentally mounting
fat/vfat file systems.  Add an extra configure option to help prevent that.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Link: https://lore.kernel.org/r/245727.1567183359@turing-police
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: reduntant assignment in __erofs_get_meta_page()

As Joe Perches suggested [1],
  err = bio_add_page(bio, page, PAGE_SIZE, 0);
- if (unlikely(err != PAGE_SIZE)) {
+ if (err != PAGE_SIZE) {
  err = -EFAULT;
  goto err_out;
  }

The initial assignment to err is odd as it's not
actually an error value -E<FOO> but a int size
from a unsigned int len.

Here the return is either 0 or PAGE_SIZE.

This would be more legible to me as:

if (bio_add_page(bio, page, PAGE_SIZE, 0) != PAGE_SIZE) {
err = -EFAULT;
goto err_out;
}

[1] https://lore.kernel.org/r/74c4784319b40deabfbaea92468f7e3ef44f1c96.camel@perches.com/
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190829171741.225219-1-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: remove all likely/unlikely annotations

As Dan Carpenter suggested [1], I have to remove
all erofs likely/unlikely annotations.

[1] https://lore.kernel.org/linux-fsdevel/20190829154346.GK23584@kadam/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190829163827.203274-1-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: fix up exfat directory location

I messed up on the exfat MAINTAINER entry, the code is in
drivers/staging/exfat/ not fs/exfat/

Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reported-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: exfat: add exfat filesystem code to staging

The exfat code needs a lot of work to get it into "real" shape for
the fs/ part of the kernel, so put it into drivers/staging/ for now so
that it can be worked on by everyone in the community.

The full specification of the filesystem can be found at:
  https://docs.microsoft.com/en-us/windows/win32/fileio/exfat-specification

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190828160817.6250-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: sound: Fix error path of audio_init

If most_register_configfs_subsys() fails, we should
call most_deregister_component() do cleanup.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 919c03ae11b9 ("staging: most: enable configfs support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190827131346.12704-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix indentation

Checkpatch reports WARNING:SUSPECT_CODE_INDENT in several places. Fix
this by aligning code properly with tabs.

Signed-off-by: Stephen Brennan <stephen@brennan.io>
Link: https://lore.kernel.org/r/20190828043542.3753-1-stephen@brennan.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: fix more header declarations

More headers needed to be fixed when moving greybus out of staging and
enabling the COMPILE_TEST option.

Add forward declarations for the needed structures.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190828124825.20800-1-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct

Move some register definitions to the per-device array of struct
st_lsm6dsx_sensor_settings in order to simplify adding new sensor
devices to the driver.

Also, remove completely unused register definitions.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: greybus: add missing includes

Before moving greybus core out of staging and moving header files to
include/linux some greybus header files were missing the necessary
includes. This would trigger compilation faillures with some example
errors logged bellow for with CONFIG_KERNEL_HEADER_TEST=y.

So, add the necessary headers to compile clean before relocating the
header files.

./include/linux/greybus/hd.h:23:50: error: unknown type name 'u16'
  int (*cport_disable)(struct gb_host_device *hd, u16 cport_id); ^~~
./include/linux/greybus/greybus_protocols.h:1314:2: error: unknown type name '__u8'
  __u8 data[0];
  ^~~~
./include/linux/greybus/hd.h:24:52: error: unknown type name 'u16'
  int (*cport_connected)(struct gb_host_device *hd, u16 cport_id); ^~~
./include/linux/greybus/hd.h:25:48: error: unknown type name 'u16'
  int (*cport_flush)(struct gb_host_device *hd, u16 cport_id); ^~~
./include/linux/greybus/hd.h:26:51: error: unknown type name 'u16'
  int (*cport_shutdown)(struct gb_host_device *hd, u16 cport_id, ^~~
./include/linux/greybus/hd.h:27:5: error: unknown type name 'u8'
u8 phase, unsigned int timeout);
     ^~
./include/linux/greybus/hd.h:28:50: error: unknown type name 'u16'
  int (*cport_quiesce)(struct gb_host_device *hd, u16 cport_id, ^~~
./include/linux/greybus/hd.h:29:5: error: unknown type name 'size_t'
     size_t peer_space, unsigned int timeout);
     ^~~~~~
./include/linux/greybus/hd.h:29:5: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?
./include/linux/greybus/hd.h:1:1:
+#include <stddef.h>
 /* SPDX-License-Identifier: GPL-2.0 */
./include/linux/greybus/hd.h:29:5:
     size_t peer_space, unsigned int timeout);
     ^~~~~~
./include/linux/greybus/hd.h:30:48: error: unknown type name 'u16'
  int (*cport_clear)(struct gb_host_device *hd, u16 cport_id); ^~~
./include/linux/greybus/hd.h:32:49: error: unknown type name 'u16'
  int (*message_send)(struct gb_host_device *hd, u16 dest_cport_id, ^~~
./include/linux/greybus/hd.h:33:32: error: unknown type name 'gfp_t'
struct gb_message *message, gfp_t gfp_mask); ^~~~~
./include/linux/greybus/hd.h:35:55: error: unknown type name 'u16'
  int (*latency_tag_enable)(struct gb_host_device *hd, u16 cport_id);

Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Gao Xiang <hsiangkao@aol.com>
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20190827155302.25704-1-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: move es2 to drivers/greybus/

The es2 Greybus host controller has long been stable, so move it out of
drivers/staging/ to drivers/greybus/

Cc: Johan Hovold <johan@kernel.org>
Cc: greybus-dev@lists.linaro.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: move the greybus core to drivers/greybus

The Greybus core code has been stable for a long time, and has been
shipping for many years in millions of phones.  With the advent of a
recent Google Summer of Code project, and a number of new devices in the
works from various companies, it is time to get the core greybus code
out of staging as it really is going to be with us for a while.

Cc: Johan Hovold <johan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: greybus-dev@lists.linaro.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: move core include files to include/linux/greybus/

With the goal of moving the core of the greybus code out of staging, the
include files need to be moved to include/linux/greybus.h and
include/linux/greybus/

Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: David Lin <dtwlin@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: loopback: Fix up some alignment checkpatch issues

Some function prototypes do not match the expected alignment formatting
so fix that up so that checkpatch is happy.

Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Johan Hovold <johan@kernel.org>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: log: Fix up some alignment checkpatch issues

Some function prototypes do not match the expected alignment formatting
so fix that up so that checkpatch is happy.

Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: manifest: Fix up some alignment checkpatch issues

Some function prototypes do not match the expected alignment formatting
so fix that up so that checkpatch is happy.

Cc: Johan Hovold <johan@kernel.org>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: hd: Fix up some alignment checkpatch issues

Some function prototypes do not match the expected alignment formatting
so fix that up so that checkpatch is happy.

Cc: Johan Hovold <johan@kernel.org>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: remove license "boilerplate"

When the greybus drivers were converted to SPDX identifiers for the
license text, some license boilerplate was not removed.  Clean this up
by removing this unneeded text now.

Cc: Johan Hovold <johan@kernel.org>
Cc: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Acked-by: Mark Greer <mgreer@animalcreekk.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: fix up SPDX comment in .h files

When these files originally got an SPDX tag, I used // instead of /* */
for the .h files.  Fix this up to use // properly.

Cc: Johan Hovold <johan@kernel.org>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: fix compile warnings when moving out include/trace/events/erofs.h

As Stephon reported [1], many compile warnings are raised when
moving out include/trace/events/erofs.h:

In file included from include/trace/events/erofs.h:8,
                 from <command-line>:
include/trace/events/erofs.h:28:37: warning: 'struct dentry' declared inside parameter list will not be visible outside of this definition or declaration
  TP_PROTO(struct inode *dir, struct dentry *dentry, unsigned int flags),
                                     ^~~~~~
include/linux/tracepoint.h:233:34: note: in definition of macro '__DECLARE_TRACE'
  static inline void trace_##name(proto)    \
                                  ^~~~~
include/linux/tracepoint.h:396:24: note: in expansion of macro 'PARAMS'
  __DECLARE_TRACE(name, PARAMS(proto), PARAMS(args),  \
                        ^~~~~~
include/linux/tracepoint.h:532:2: note: in expansion of macro 'DECLARE_TRACE'
  DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
  ^~~~~~~~~~~~~
include/linux/tracepoint.h:532:22: note: in expansion of macro 'PARAMS'
  DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
                      ^~~~~~
include/trace/events/erofs.h:26:1: note: in expansion of macro 'TRACE_EVENT'
 TRACE_EVENT(erofs_lookup,
 ^~~~~~~~~~~
include/trace/events/erofs.h:28:2: note: in expansion of macro 'TP_PROTO'
  TP_PROTO(struct inode *dir, struct dentry *dentry, unsigned int flags),
  ^~~~~~~~

That makes me very confused since most original EROFS tracepoint code
was taken from f2fs, and finally I found

commit 43c78d88036e ("kbuild: compile-test kernel headers to ensure they are self-contained")

It seems these warnings are generated from KERNEL_HEADER_TEST feature and
ext4/f2fs tracepoint files were in blacklist.

Anyway, let's fix these issues for KERNEL_HEADER_TEST feature instead
of adding to blacklist...

[1] https://lore.kernel.org/lkml/20190826162432.11100665@canb.auug.org.au/

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190826132653.100731-1-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Add or remove blank lines as required

This patch fixes the file r8190_rtl8256.c to avoid the following
checkpatch.pl warnings:
CHECK: Blank lines aren't necessary before a close brace '}'
CHECK: Please use a blank line after function/struct/union/enum declarations
CHECK: Please don't use multiple blank line

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Link: https://lore.kernel.org/r/20190826182227.30738-1-sylphrenadin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Add or remove spaces to fix style issues

This patch fixes the file r8190_rtl8256.c to avoid the following
checkpatch.pl warnings:
CHECK: spaces preferred around that '<<' (ctx:VxV)
CHECK: spaces preferred around that '-' (ctx:VxV)
CHECK: No space is necessary after a cast

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Link: https://lore.kernel.org/r/20190826180909.27775-1-sylphrenadin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: wifi: checkpatch style fix

Remove multiple blank lines.

Signed-off-by: Taihsiang Ho (tai271828) <tai271828@gmail.com>
Link: https://lore.kernel.org/r/20190826052018.18649-1-tai271828@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most-core: Fix checkpatch warnings

Hi,

This patch solves the following checkpatch.pl's messages in drivers/staging/most/core.c.

WARNING: line over 80 characters
+ return snprintf(buf, PAGE_SIZE, "%s", ch_data_type[i].name);

CHECK: Please use a blank line after function/struct/union/enum declarations
+}
+/**

Signed-off-by: Peikan Tsai <peikantsai@gmail.com>
Link: https://lore.kernel.org/r/20190825175849.GA74586@MarkdeMacBook-Pro.local
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: st_lsm6dsx: introduce update_fifo function pointer

Introduce update_fifo routine pointer in st_lsm6dsx_fifo_ops data
structure since we will need a different update FIFO configuration
callback adding support for lsm6ds0/lsm9ds1 imu device

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: isl29501: Rename bindings documentation file

Rename the bindings documentation file for Renesas ISL29501 Time-of-flight
sensor from isl29501.txt to renesas,isl29501.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section

This should be RFD77402, not RFD77420.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: st_sensors: Fix build error

IIO_ST_SENSORS_CORE select IIO_ST_SENSORS_I2C
unconditionally, if REGMAP_I2C is not set, build fails

drivers/iio/common/st_sensors/st_sensors_i2c.o: In function `st_sensors_i2c_configure':
st_sensors_i2c.c:(.text+0x58): undefined reference to `__devm_regmap_init_i2c'

This patch selects REGMAP_I2C to fix it.
IIO_ST_SENSORS_SPI is similar to SPI issue.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 062809ef7733 ("iio: make st_sensors drivers use regmap")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: Add AD7606B ADC documentation

Documentation for AD7606B Analog to Digital Converter and software
mode was added.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: Migrate AD7606 documentation to yaml

The documentation for ad7606 was migrated to yaml.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: Add Beniamin Bia for AD7606 driver

Add Beniamin Bia as maintainer for AD7606 driver.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7606: Add support for AD7606B ADC

The AD7606B is a 16-bit ADC that supports simultaneous sampling of 8
channels. It is pin compatible to AD7606, but adds extra modes by
writing to the register map.

The AD7606B can be configured to work in software mode by setting all
oversampling pins to high. This mode is selected by default.
The oversampling ratio is configured from the OS_MODE register (address
0x08) with the addition of OS=128 and OS=256 that were not available in
hardware mode.

The device is configured to output data on a single spi channel, but this
configuration must be done right after restart. That is why the delay was
removed for devices which doesn't require it.

Moreover, in software mode, the range gpio has no longer its function.
Instead, the scale can be configured individually for each channel from
the RANGE_CH registers (address 0x03 to 0x06). Besides the already
supported ±10 V and ±5 V ranges, software mode can also accommodate the
±2.5 V range.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Co-developed-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: rtl8192u: Add space around binary operators

This patch fixes the file r8180_93cx6.c to avoid the checkpatch.pl warnings:

CHECK: spaces preferred around that '<<' (ctx:VxV)
CHECK: spaces preferred around that '-' (ctx:VxV)

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Link: https://lore.kernel.org/r/20190822193535.14357-1-sylphrenadin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove code under TO_DO_LIST

Several blocks of code are guarded by #ifdef TO_DO_LIST. If this is
defined, compilation fails. No machinery exists to define this, and no
documenation on the in-progress feature exists. Since this code is dead,
let's delete it.

Signed-off-by: Stephen Brennan <stephen@brennan.io>
Link: https://lore.kernel.org/r/20190823162410.10038-1-stephen@brennan.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Remove unnecessary blank lines

This patch fixes the file r8180_93cx6.c to avoid the checkpatch.pl warning:

CHECK: Please don't use multiple blank lines

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Link: https://lore.kernel.org/r/20190822145545.19894-1-sylphrenadin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove redundant assignment to pointer crypt

The pointer crypt is being set with a value that is never read,
the assignment is redundant and hence can be removed.

Thanks to Dan Carpenter for sanity checking that this was indeed
redundant.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190822084609.8971-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: os_dep: Drop condition with no effect

As the "else if" and "else" branch body are identical the condition
has no effect. So drop the "else if" condition.

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20190821181631.GA11082@saurav
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: hal: Drop condition with no effect

As the "else if" and "else" branch body are identical the condition
has no effect. So drop the else if condition.

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20190821180153.GA10678@saurav
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: os_dep: Remove unused declarations

Remove unused Macro declarations

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/1566406901-6700-1-git-send-email-hariprasad.kelam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: move erofs out of staging

EROFS filesystem has been merged into linux-staging for a year.

EROFS is designed to be a better solution of saving extra storage
space with guaranteed end-to-end performance for read-only files
with the help of reduced metadata, fixed-sized output compression
and decompression inplace technologies.

In the past year, EROFS was greatly improved by many people as
a staging driver, self-tested, betaed by a large number of our
internal users, successfully applied to almost all in-service
HUAWEI smartphones as the part of EMUI 9.1 and proven to be stable
enough to be moved out of staging.

EROFS is a self-contained filesystem driver. Although there are
still some TODOs to be more generic, we have a dedicated team
actively keeping on working on EROFS in order to make it better
with the evolution of Linux kernel as the other in-kernel filesystems.

As Pavel suggested, it's better to do as one commit since git
can do moves and all histories will be saved in this way.

Let's promote it from staging and enhance it more actively as
a "real" part of kernel for more wider scenarios!

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Pavel Machek <pavel@denx.de>
Cc: David Sterba <dsterba@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J . Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Richard Weinberger <richard@nod.at>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Li Guifu <bluce.liguifu@huawei.com>
Cc: Fang Wei <fangwei1@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190822213659.5501-1-hsiangkao@aol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spacing in ieee80211

Checkpatch emits several errors, warnings, and checks about spacing.
Apply checkpatch's suggested spacing rules.

Signed-off-by: Stephen Brennan <stephen@brennan.io>
Link: https://lore.kernel.org/r/20190821143540.4501-4-stephen@brennan.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix macro alignment in ieee80211

Several macros display unaligned, due to mixes of tabs and spaces. These
can be fixed by making spacing consistent, do this.

Signed-off-by: Stephen Brennan <stephen@brennan.io>
Link: https://lore.kernel.org/r/20190821143540.4501-3-stephen@brennan.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix OPEN_BRACE errors in ieee80211

Checkpatch emits several errors regarding braces being on the incorrect
line. These can be fixed by moving the brace, do this. In a few cases,
some comments were moved to facilitate this.

Signed-off-by: Stephen Brennan <stephen@brennan.io>
Link: https://lore.kernel.org/r/20190821143540.4501-2-stephen@brennan.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: remove set but not used variable 'data_len'

Fixes gcc '-Wunused-but-set-variable' warning:

 In function ieee80211_ccmp_encrypt:
drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_ccmp.c:162:6:
 warning: variable data_len set but not used [-Wunused-but-set-variable]

It is not used since commit 5ee5265674ce ("staging:
rtl8192e: rtllib_crypt_ccmp.c: Use crypto API ccm(aes)")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190821122802.44028-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: remove two set but not used variables

Fixes gcc '-Wunused-but-set-variable' warning:

 In function '_rtl92e_dm_tx_power_tracking_callback_tssi':
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c:621:7:
 warning: variable 'bHighpowerstate' set but not used [-Wunused-but-set-variable]
 In function '_rtl92e_dm_rx_path_sel_byrssi':
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c:1904:32:
 warning: variable 'cck_rx_ver2_min_index' set but not used [-Wunused-but-set-variable]

They are never used, so can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190821122556.37636-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee80211: remove set but not used variable 'data_len'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_ccmp.c:
 In function ieee80211_ccmp_encrypt:
drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_ccmp.c:162:6:
 warning: variable data_len set but not used [-Wunused-but-set-variable]

It is not used since commit eb0e7bf3ca94 ("staging:
rtl8192u: ieee80211: ieee80211_crypt_ccmp.c: Use crypto API ccm(aes)")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190821122250.71404-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: detect potential multiref due to corrupted images

As reported by erofs-utils fuzzer, currently, multiref
(ondisk deduplication) hasn't been supported for now,
we should forbid it properly.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190821140152.229648-1-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: remove redundant assignment to retval

Variable retval is initialized to a value that is never read and it
is re-assigned later. The initialization is redundant and can be
removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190818184649.13828-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: kpc2000: kpc2000_i2c: Fix different address spaces warnings

This patch fixes the following sparse warnings:

kpc2000_i2c.c:137: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:137:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:137:    got void *
kpc2000_i2c.c:146: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:146:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:146:    got void *
kpc2000_i2c.c:147: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:147:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:147:    got void *
kpc2000_i2c.c:166: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:166:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:166:    got void *
kpc2000_i2c.c:166: warning: incorrect type in argument 2
                                  (different address spaces)
kpc2000_i2c.c:166:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:166:    got void *
kpc2000_i2c.c:168: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:168:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:168:    got void *
kpc2000_i2c.c:168: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:168:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:168:    got void *
kpc2000_i2c.c:171: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:171:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:171:    got void *
kpc2000_i2c.c:174: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:174:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:174:    got void *
kpc2000_i2c.c:193: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:193:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:193:    got void *
kpc2000_i2c.c:194: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:194:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:194:    got void *
kpc2000_i2c.c:214: warning: incorrect type in argument 2
                                  (different address spaces)
kpc2000_i2c.c:214:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:214:    got void *
kpc2000_i2c.c:219: warning: incorrect type in argument 1
                                  (different address spaces)
kpc2000_i2c.c:219:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:219:    got void *
kpc2000_i2c.c:226: warning: incorrect type in argument 2
                                  (different address spaces)
kpc2000_i2c.c:226:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:226:    got void *
kpc2000_i2c.c:238: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:238:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:238:    got void *
kpc2000_i2c.c:244: warning: incorrect type in argument 2
                                  (different address spaces)
kpc2000_i2c.c:244:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:244:    got void *
kpc2000_i2c.c:252: warning: incorrect type in argument 1
                                  (different address spaces)
kpc2000_i2c.c:252:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:252:    got void *
kpc2000_i2c.c:257: warning: incorrect type in argument 2
                                  (different address spaces)
kpc2000_i2c.c:257:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:257:    got void *
kpc2000_i2c.c:259: warning: incorrect type in argument 2
   (different address spaces)
kpc2000_i2c.c:259:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:259:    got void *
kpc2000_i2c.c:267: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:267:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:267:    got void *
kpc2000_i2c.c:273: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:273:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:273:    got void *
kpc2000_i2c.c:293: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:293:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:293:    got void *
kpc2000_i2c.c:294: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:294:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:294:    got void *
kpc2000_i2c.c:309: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:309:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:309:    got void *
kpc2000_i2c.c:312: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:312:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:312:    got void *
kpc2000_i2c.c:317: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:317:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:317:    got void *
kpc2000_i2c.c:324: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:324:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:324:    got void *
kpc2000_i2c.c:328: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:328:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:328:    got void *
kpc2000_i2c.c:329: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:329:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:329:    got void *
kpc2000_i2c.c:330: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:330:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:330:    got void *
kpc2000_i2c.c:338: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:338:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:338:    got void *
kpc2000_i2c.c:340: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:340:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:340:    got void *
kpc2000_i2c.c:342: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:342:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:342:    got void *
kpc2000_i2c.c:350: warning: incorrect type in argument 1
                                  (different address spaces)
kpc2000_i2c.c:350:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:350:    got void *
kpc2000_i2c.c:350: warning: incorrect type in argument 2
                                  (different address spaces)
kpc2000_i2c.c:350:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:350:    got void *
kpc2000_i2c.c:351: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:351:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:351:    got void *
kpc2000_i2c.c:414: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:414:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:414:    got void *
kpc2000_i2c.c:420: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:420:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:420:    got void *
kpc2000_i2c.c:422: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:422:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:422:    got void *
kpc2000_i2c.c:427: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:427:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:427:    got void *
kpc2000_i2c.c:428: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:428:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:428:    got void *
kpc2000_i2c.c:430: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:430:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:430:    got void *
kpc2000_i2c.c:435: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:435:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:435:    got void *
kpc2000_i2c.c:436: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:436:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:436:    got void *
kpc2000_i2c.c:438: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:438:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:438:    got void *
kpc2000_i2c.c:439: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:439:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:439:    got void *
kpc2000_i2c.c:445: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:445:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:445:    got void *
kpc2000_i2c.c:446: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:446:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:446:    got void *
kpc2000_i2c.c:454: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:454:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:454:    got void *
kpc2000_i2c.c:459: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:459:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:459:    got void *
kpc2000_i2c.c:461: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:461:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:461:    got void *
kpc2000_i2c.c:472: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:472:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:472:    got void *
kpc2000_i2c.c:472: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:472:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:472:    got void *
kpc2000_i2c.c:475: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:475:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:475:    got void *
kpc2000_i2c.c:475: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:475:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:475:    got void *
kpc2000_i2c.c:493: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:493:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:493:    got void *
kpc2000_i2c.c:493: warning: incorrect type in argument 2
                                   (different address spaces)
kpc2000_i2c.c:493:    expected void volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:493:    got void *
kpc2000_i2c.c:512: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:512:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:512:    got void *
kpc2000_i2c.c:516: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:516:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:516:    got void *
kpc2000_i2c.c:516: warning: incorrect type in argument 1
                                   (different address spaces)
kpc2000_i2c.c:516:    expected void const volatile [noderef] <asn:2> *addr
kpc2000_i2c.c:516:    got void *

Signed-off-by: Eduardo Barretto <edusbarretto@gmail.com>
Link: https://lore.kernel.org/r/20190818183555.7167-1-edusbarretto@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Remove ion device tree bindings from the TODO

Commit 23a4388f24f5 ("staging: android: ion: Remove file ion_chunk_heap.c")
and eadbf7a34e44 ("staging: android: ion: Remove file ion_carveout_heap.c")
removed the chunk and carveout heaps from ion but left behind the device
tree bindings for them in the TODO, this patch removes it.

Signed-off-by: Donald Yandt <donald.yandt@gmail.com>
Link: https://lore.kernel.org/r/20190818152023.891-1-donald.yandt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Improve naming of include hearder guards

Choose a better name for the include hearder guard used in rtl871x_io.h.
'_IO_H_' is to generic and does not match the comment after the #endif.
Use '_RTL871X_IO_H_' instead.

Also make the comments in the #endif /* XXX */ match the name used in
#ifndef.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190818150609.3376-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: avoid loop in submit chains

As reported by erofs-utils fuzzer, 2 conditions
can happen in corrupted images, which can cause
unexpected behaviors.
 - access the same pcluster one more time;
 - access the tail end pcluster again, e.g.
            _ access again (will trigger tail merging)
           |
     1 2 3 1 2             ->   1 2 3 1
     |_ tail end of the chain    \___/ (unexpected behavior)
Let's detect and avoid them now.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190821030908.40282-1-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: core: Remove unneeded declaration WFD_OUI

Remove unneeded declaration "extern unsigned char WFD_OUI"

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Link: https://lore.kernel.org/r/20190819165705.GA5782@hari-Inspiron-1545
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: Fix a typo in ni_mio_common.c

This patch fix a spelling typo in ni_mio_common.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Link: https://lore.kernel.org/r/20190820153356.25189-1-standby24x7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: avoid endless loop of invalid lookback distance 0

As reported by erofs-utils fuzzer, Lookback distance should
be a positive number, so it should be actually looked back
rather than spinning.

Fixes: 02827e1796b3 ("staging: erofs: add erofs_map_blocks_iter")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-7-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: add two missing erofs_workgroup_put for corrupted images

As reported by erofs-utils fuzzer, these error handling
path will be entered to handle corrupted images.

Lack of erofs_workgroup_puts will cause unmounting
unsuccessfully.

Fix these return values to EFSCORRUPTED as well.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-4-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: cannot set EROFS_V_Z_INITED_BIT if fill_inode_lazy fails

As reported by erofs-utils fuzzer, unsupported compressed
clustersize will make fill_inode_lazy fail, for such case
we cannot set EROFS_V_Z_INITED_BIT since we need return
failure for each z_erofs_map_blocks_iter().

Fixes: 152a333a5895 ("staging: erofs: add compacted compression indexes support")
Cc: <stable@vger.kernel.org> # 5.3+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-3-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: some compressed cluster should be submitted for corrupted images

As reported by erofs_utils fuzzer, a logical page can belong
to at most 2 compressed clusters, if one compressed cluster
is corrupted, but the other has been ready in submitting chain.

The chain needs to submit anyway in order to keep the page
working properly (page unlocked with PG_error set, PG_uptodate
not set).

Let's fix it now.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-2-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: fix an error handling in erofs_readdir()

Richard observed a forever loop of erofs_read_raw_page() [1]
which can be generated by forcely setting ->u.i_blkaddr
to 0xdeadbeef (as my understanding block layer can
handle access beyond end of device correctly).

After digging into that, it seems the problem is highly
related with directories and then I found the root cause
is an improper error handling in erofs_readdir().

Let's fix it now.

[1] https://lore.kernel.org/r/1163995781.68824.1566084358245.JavaMail.zimbra@nod.at/

Reported-by: Richard Weinberger <richard@nod.at>
Fixes: 3aa8ec716e52 ("staging: erofs: add directory operations")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190818125457.25906-1-hsiangkao@aol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: refuse to mount images with malformed volume name

As Richard reminder [1], A valid volume name should be
ended in NIL terminator within the length of volume_name.

Since this field currently isn't really used, let's fix
it to avoid potential bugs in the future.

[1] https://lore.kernel.org/r/1133002215.69049.1566119033047.JavaMail.zimbra@nod.at/

Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190818102824.22330-1-hsiangkao@aol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.3-rc5 into staging-next

We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.3-rc5

Merge tag 'fixes-for-5.3-rc5' of git://git./linux/kernel/git/mtd/linux

Pull MTD fix from Richard Weinberger:
 "A single fix for MTD to correctly set the spi-nor WP pin"

* tag 'fixes-for-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: Fix the disabling of write protection at init

tools: iio: add .gitignore

The generated files must not be tracked by git. Add a local .gitignore.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: sc27xx: Change to polling mode to read data

On Spreadtrum platform, the headphone will read one ADC channel multiple
times to identify the headphone type, and the headphone identification is
sensitive of the ADC reading time. And we found it will take longer time
to reading ADC data by using interrupt mode comparing with the polling
mode, thus we should change to polling mode to improve the efficiency
of reading data, which can identify the headphone type successfully.

Signed-off-by: Freeman Liu <freeman.liu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: hid-sensor-attributes: Convert to use int_pow()

Instead of linear approach to calculate power of 10, use generic int_pow()
which does it better.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: max1027: Use device-managed APIs

Use device-managed APIs to simplify the code.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: accel: adis16240: Improve readability on write_raw function

Replace shift and minus operation by GENMASK macro and remove the local
variables used to store intermediate data.

Signed-off-by: Rodrigo Ribeiro Carvalho <rodrigorsdc@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: ftm-quaddec: Fix typo in a filepath

Fix typo (s/quadddec/quaddec/) in the path to the documentation.

Cc: linux-iio@vger.kernel.org
Fixes: 517b2d045aeb ("MAINTAINERS: add counter/ftm-quaddec driver entry")
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192

This patch add device tree binding documentation for AD7192 adc in YAML
format.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency

By adding this option we are able to remove the sync3 field and dt binding.
When setting the required cutoff frequency we also determine the ADC
configuration for chop and sync filter.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: adc: ad7192: Remove platform data

This patch removes the reference voltage entry from the platform_data
structure. This is no longer needed since the reference voltage is obtained
from the device tree. With this we also remove the entire ad7192.h file.

The undefined reference voltage warning is promoted to an error signaling a
problem with the device tree.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: adis16460: fix variable signedness

Caught via static-analysis checker:
```
drivers/iio/imu/adis16460.c
   152  static int adis16460_set_freq(struct iio_dev *indio_dev, int val, int val2)
   153  {
   154          struct adis16460 *st = iio_priv(indio_dev);
   155          unsigned int t;
                ^^^^^^^^^^^^^^

   156
   157          t =  val * 1000 + val2 / 1000;
   158          if (t <= 0)
                    ^^^^^^
Unsigned is not less than zero.
```

The types of `val` && `val2` are obtained from the IIO `write_raw` hook, so
userspace can provide negative values, which can cause weird behavior after
conversion to unsigned.

This patch changes the sign of variable `t` so that -EINVAL will be
returned for negative values as well.

Fixes: db6ed4d23dd1 ("iio: imu: Add support for the ADIS16460 IMU")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: kxcjk1013: Improve comments on KIOX010A and KIOX020A ACPI ids

The KIOX010A and KIOX020A ACPI ids go hand in hand, they are used in
yoga style 2-in-1s, with KIOX010A indicating the KXCJ91008 sensor in the
display of the 2-in-1 and KIOX020A indicating the KXCJ91008 sensor in the
base.

Improve the existing comment on the "KIOX010A" kx_acpi_match table entry
to make clear we are talking about a yoga-style (360 degree hinges) device
here and add a similar comment to the "KIOX020A" entry.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Merge tag 'for-5.3-rc4-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "Two fixes that popped up during testing:

   - fix for sysfs-related code that adds/removes block groups, warnings
     appear during several fstests in connection with sysfs updates in
     5.3, the fix essentially replaces a workaround with scope NOFS and
     applies to 5.2-based branch too

   - add sanity check of trim range"

* tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: trim: Check the range passed into to prevent overflow
  Btrfs: fix sysfs warning and missing raid sysfs directories