Tom Warren [Fri, 17 Jun 2011 06:27:28 +0000 (06:27 +0000)]
GPIO: Tegra2: add GPIO driver for Tegra2
Signed-off-by: Tom Warren <twarren@nvidia.com>
David Müller (ELSOFT AG) [Sun, 1 May 2011 21:52:51 +0000 (21:52 +0000)]
VCMA9: various cleanups/code style fixes
Signed-off-by: David Müller <d.mueller@elsoft.ch>
David Müller (ELSOFT AG) [Sun, 1 May 2011 21:52:50 +0000 (21:52 +0000)]
VCMA9: use CFI driver (and remove the old one)
Signed-off-by: David Müller <d.mueller@elsoft.ch>
David Müller (ELSOFT AG) [Sun, 1 May 2011 21:52:49 +0000 (21:52 +0000)]
VCMA9: remove unneeded config.mk
Signed-off-by: David Müller <d.mueller@elsoft.ch>
Aneesh V [Thu, 16 Jun 2011 23:30:54 +0000 (23:30 +0000)]
armv7: adapt s5pc1xx to the new cache maintenance framework
adapt s5pc1xx to the new layered cache maintenance framework
Signed-off-by: Aneesh V <aneesh@ti.com>
Aneesh V [Thu, 16 Jun 2011 23:30:53 +0000 (23:30 +0000)]
armv7: adapt omap3 to the new cache maintenance framework
adapt omap3 to the new layered cache maintenance framework
Signed-off-by: Aneesh V <aneesh@ti.com>
Aneesh V [Thu, 16 Jun 2011 23:30:52 +0000 (23:30 +0000)]
armv7: adapt omap4 to the new cache maintenance framework
adapt omap4 to the new layered cache maintenance framework
Signed-off-by: Aneesh V <aneesh@ti.com>
Aneesh V [Thu, 16 Jun 2011 23:30:51 +0000 (23:30 +0000)]
armv7: add PL310 support to u-boot
PL310 is the L2$ controller from ARM used in many SoCs
including the Cortex-A9 based OMAP4430
Add support for some of the key PL310 operations
- Invalidate all
- Invalidate range
- Flush(clean & invalidate) all
- Flush range
Signed-off-by: Aneesh V <aneesh@ti.com>
Aneesh V [Thu, 16 Jun 2011 23:30:50 +0000 (23:30 +0000)]
arm: minor fixes for cache and mmu handling
1. make sure that page table setup is not done multiple times
2. flush_dcache_all() is more appropriate while disabling cache
than a range flush on the entire memory(flush_cache())
Provide a default implementation for flush_dcache_all()
for backward compatibility and to avoid build issues.
Signed-off-by: Aneesh V <aneesh@ti.com>
Aneesh V [Thu, 16 Jun 2011 23:30:49 +0000 (23:30 +0000)]
armv7: integrate cache maintenance support
- Enable I-cache on bootup
- Enable MMU and D-cache immediately after relocation
- Do necessary initialization before enabling d-cache and MMU
- Changes to cleanup_before_linux()
- Make changes according to the new framework
Signed-off-by: Aneesh V <aneesh@ti.com>
Aneesh V [Thu, 16 Jun 2011 23:30:48 +0000 (23:30 +0000)]
armv7: rename cache related CONFIG flags
Replace the cache related CONFIG flags with more meaningful
names. Following are the changes:
CONFIG_L2_OFF -> CONFIG_SYS_L2CACHE_OFF
CONFIG_SYS_NO_ICACHE -> CONFIG_SYS_ICACHE_OFF
CONFIG_SYS_NO_DCACHE -> CONFIG_SYS_DCACHE_OFF
Signed-off-by: Aneesh V <aneesh@ti.com>
V2:
* Changed CONFIG_L2_OFF -> CONFIG_SYS_NO_L2CACHE
V4:
* Changed all three flags to the final names suggested as above
and accordingly changed the commit message
Aneesh V [Thu, 16 Jun 2011 23:30:47 +0000 (23:30 +0000)]
armv7: cache maintenance operations for armv7
- Add a framework for layered cache maintenance
- separate out SOC specific outer cache maintenance from
maintenance of caches known to CPU
- Add generic ARMv7 cache maintenance operations that affect all
caches known to ARMv7 CPUs. For instance in Cortex-A8 these
opertions will affect both L1 and L2 caches. In Cortex-A9
these will affect only L1 cache
- D-cache operations supported:
- Invalidate entire D-cache
- Invalidate D-cache range
- Flush(clean & invalidate) entire D-cache
- Flush D-cache range
- I-cache operations supported:
- Invalidate entire I-cache
- Add maintenance functions for TLB, branch predictor array etc.
- Enable -march=armv7-a so that armv7 assembly instructions can be
used
Signed-off-by: Aneesh V <aneesh@ti.com>
Aneesh V [Thu, 16 Jun 2011 23:30:46 +0000 (23:30 +0000)]
arm: make default implementation of cache_flush() weakly linked
make default implementation of cache_flush() weakly linked so that
sub-architectures can override it
Signed-off-by: Aneesh V <aneesh@ti.com>
Kumar Gala [Thu, 30 Jun 2011 06:17:02 +0000 (01:17 -0500)]
Makefile: need to remove generated u-boot-nand_spl.lds
On MPC85xx based NAND_SPL builds we generate a u-boot-nand_spl.lds based
on output from preprocessor. We where never removed it.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Alex Waterman [Thu, 19 May 2011 19:08:36 +0000 (15:08 -0400)]
NAND: Add 16bit NAND support for the NDFC
This patch adds support for 16 bit NAND devices attached to the
NDFC on ppc4xx processors. Two config entries were added:
CONFIG_SYS_NDFC_16 - Setting this tells the NDFC that a
16 bit device is attached.
CONFIG_SYS_NDFC_EBC0_CFG - This is for the External Bus
Controller configuration register.
Also, a new ndfc_read_byte() function was added which does not
first convert the data to little endian.
The NAND SPL was also modified to do 16bit bad block testing
when a 16 bit chip is being used.
Signed-off-by: Alex Waterman <awaterman@dawning.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Ben Gardiner [Tue, 14 Jun 2011 20:35:07 +0000 (16:35 -0400)]
cmd_nand: add nand write.trimffs command
Add another nand write. variant, trimffs. This command will request of
nand_write_skip_bad() that all trailing all-0xff pages will be
dropped from eraseblocks when they are written to flash as-per the
reccommended behaviour of the UBI FAQ [1].
The function that implements this timming is the drop_ffs() function
by Artem Bityutskiy, ported from the mtd-utils tree.
[1] http://www.linux-mtd.infradead.org/doc/ubi.html#L_flasher_algo
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Artem Bityutskiy <dedekind1@gmail.com>
CC: Detlev Zundel <dzu@denx.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Ben Gardiner [Tue, 14 Jun 2011 20:35:06 +0000 (16:35 -0400)]
nand_util: drop trailing all-0xff pages if requested
Add a flag to nand_read_skip_bad() such that if true, any trailing
pages in an eraseblock whose contents are entirely 0xff will be
dropped.
The implementation is via a new drop_ffs() function which is
based on the function of the same name from the ubiformat
utility by Artem Bityutskiy.
This is as-per the reccomendations of the UBI FAQ [1]
[1] http://www.linux-mtd.infradead.org/doc/ubi.html#L_flasher_algo
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Artem Bityutskiy <dedekind1@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Ben Gardiner [Tue, 14 Jun 2011 20:35:05 +0000 (16:35 -0400)]
nand_util: treat WITH_YAFFS_OOB as a mode
When specified in the flags argument of nand_write, WITH_YAFFS_OOB causes an
operation which is mutually exclusive with the 'usual' way of writing.
Add a check that client code does not specify WITH_YAFFS_OOB along with any
other flags and add a comment indicating that the WITH_YAFFS_OOB flag should
not be mixed with other flags.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Ben Gardiner [Tue, 24 May 2011 14:18:35 +0000 (10:18 -0400)]
nand_util: convert nand_write_skip_bad() to flags
In a future commit the behaviour of nand_write_skip_bad()
will be further extended.
Convert the only flag currently passed to the nand_write_
skip_bad() function to a bitfield of only one allocated
member. This should avoid an explosion of int's at the
end of the parameter list or the ambiguous calls like
nand_write_skip_bad(info, offset, len, buf, 0, 1, 1);
nand_write_skip_bad(info, offset, len, buf, 0, 1, 0);
Instead there will be:
nand_write_skip_bad(info, offset, len, buf, WITH_YAFFS_OOB |
WITH_OTHER);
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Ben Gardiner [Tue, 24 May 2011 14:18:34 +0000 (10:18 -0400)]
nand_base: trivial: fix comment read/write comment
Replace an incorrect 'read' with 'write' in a comment.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Wolfgang Denk [Fri, 1 Jul 2011 07:42:25 +0000 (09:42 +0200)]
Merge branch 'next' of git://git.denx.de/u-boot-nios
* 'next' of git://git.denx.de/u-boot-nios:
nios2: move generic config to boards.cfg
Mike Frysinger [Mon, 27 Jun 2011 03:00:19 +0000 (23:00 -0400)]
nios2: move generic config to boards.cfg
I can't build test this, but just looking at the config files written
and it seems OK ...
Tested-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
Mike Frysinger [Mon, 9 May 2011 22:33:36 +0000 (18:33 -0400)]
cfi_flash: reverse geometry for newer STM parts
For newer STM parts where CFI >= 1.1, there is a byte in the extended
structure that declares the flash layout type (just like the AMD parts),
so key off of that to find out when we need to reverse the geometry.
This can be seen with M29W640 parts where U-Boot does:
Bank # 1: CFI conformant FLASH (16 x 16) Size: 8 MB in 135 Sectors
AMD Standard command set, Manufacturer ID: 0x20, Device ID: 0x22ED
Erase timeout: 8192 ms, write timeout: 1 ms
Buffer write timeout: 1 ms, buffer size: 16 bytes
Sector Start Addresses:
20000000 RO
20002000 RO
20004000 RO
20006000 RO
20008000 RO
2000A000 RO
2000C000 RO
2000E000 RO
20010000 RO
20020000 RO
...
But Linux does:
physmap platform flash device:
00800000 at
20000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank.
Manufacturer ID 0x000020 Chip ID 0x0022ed
physmap-flash.0: Swapping erase regions for top-boot CFI table.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Mon, 27 Jun 2011 20:22:42 +0000 (22:22 +0200)]
Prepare v2011.06
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jun 2011 20:20:37 +0000 (22:20 +0200)]
Minor coding style fixes.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Sat, 25 Jun 2011 01:12:36 +0000 (21:12 -0400)]
usb: convert to partial linking
Looks like this was missed during the conversion to partial linking.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Zhao Chenhui [Tue, 19 Apr 2011 02:47:05 +0000 (10:47 +0800)]
ehci-pci: Fix PCI EHCI driver for 36-bit
Convert the PCI base address into a virtual address.
Signed-off-by: Zhao Chenhui <b35336@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Cliff Cai [Thu, 21 Apr 2011 16:42:10 +0000 (12:42 -0400)]
musb: process control messages after roothub accepted it
When dealing with non-multipoint devices, if the software root hub code
accepted the message, then we still need to process it normally. So only
return quickly when the root hub skipped the message or is otherwise in
an error state.
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Thu, 23 Jun 2011 13:37:33 +0000 (15:37 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
run arm_pci_init after relocation
IXP42x PCI rewrite
update/fix PDNB3 board
update/fix IXDP425 / IXDPG425 boards
add dvlhost (dLAN 200 AV Wireless G) board
IXP NPE: add support for fixed-speed MII ports
update/fix AcTux4 board
update/fix AcTux3 board
update/fix AcTux2 board
update/fix AcTux1 board
use -ffunction-sections / --gc-sections on IXP42x
support CONFIG_SYS_LDSCRIPT on ARM
fix "depend" target in npe directory
Fix IXP code to work after relocation was added
trigger hardware watchdog in IXP42x serial driver
add support for IXP42x Rev. B1 and newer
add XScale sub architecture (IXP/PXA) to maintainer list
Conflicts:
arch/arm/lib/board.c
Signed-off-by: Wolfgang Denk <wd@denx.de>
Michael Schwingen [Sun, 22 May 2011 22:00:13 +0000 (00:00 +0200)]
run arm_pci_init after relocation
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:12 +0000 (00:00 +0200)]
IXP42x PCI rewrite
clean up IXP PCI handling: get rid of IXP-private bus scan, BAR assign etc.
code and use u-boot's PCI infrastructure instead. Move board-specific PCI
setup code (clock/reset) to board directory.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:11 +0000 (00:00 +0200)]
update/fix PDNB3 board
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:10 +0000 (00:00 +0200)]
update/fix IXDP425 / IXDPG425 boards
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:09 +0000 (00:00 +0200)]
add dvlhost (dLAN 200 AV Wireless G) board
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:08 +0000 (00:00 +0200)]
IXP NPE: add support for fixed-speed MII ports
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:07 +0000 (00:00 +0200)]
update/fix AcTux4 board
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:06 +0000 (00:00 +0200)]
update/fix AcTux3 board
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:05 +0000 (00:00 +0200)]
update/fix AcTux2 board
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:04 +0000 (00:00 +0200)]
update/fix AcTux1 board
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:03 +0000 (00:00 +0200)]
use -ffunction-sections / --gc-sections on IXP42x
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:02 +0000 (00:00 +0200)]
support CONFIG_SYS_LDSCRIPT on ARM
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:01 +0000 (00:00 +0200)]
fix "depend" target in npe directory
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 22:00:00 +0000 (00:00 +0200)]
Fix IXP code to work after relocation was added
- jump to real flash location after reset before turning off flash mirror
- fix timer system to use HZ == 1000, remove broken interrupt-based code
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 21:59:59 +0000 (23:59 +0200)]
trigger hardware watchdog in IXP42x serial driver
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 21:59:58 +0000 (23:59 +0200)]
add support for IXP42x Rev. B1 and newer
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Sun, 22 May 2011 21:59:57 +0000 (23:59 +0200)]
add XScale sub architecture (IXP/PXA) to maintainer list
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Mike Frysinger [Sun, 19 Jun 2011 08:27:39 +0000 (08:27 +0000)]
tools: make it possible to build tools unconfigured
On Sunday, June 19, 2011 13:55:13 Ilya Yanok wrote:
> On 18.06.2011 23:03, Mike Frysinger wrote:
> >> - tools/Makefile put common/env_embedded.o and envcrc.o to object list
> >>
> >> conditionally. This fixes errors during dependency generation.
> >
> > pretty sure this breaks board builds. if the only thing this fixes is a
>
> I'm sorry but I can't see how this can break the builds. Could you
> please be more specific? I've tried to build some boards, it actually
> works...
i might be thinking of a different env_embedded situation. a different
problem with your patch to tools/Makefile: you copied the same logic multiple
times which means more bitrot.
why dont you do something like:
> > harmless warning when generating dependency files, then i say ignore it.
> > after all, this is how it has always worked in the past and no one really
> > cared.
>
> Yep, they are harmless but they are not warnings but rather scary errors
> actually. ;) I think it's better to fix them.
i guess my threshold for being scared is a bit higher :p
-mike
Ilya Yanok [Mon, 20 Jun 2011 12:45:38 +0000 (12:45 +0000)]
Makefile: move $(VERSION_FILE) rule out of ifeq configured
mkimage relies on autogenerated version so we need to move
$(VERSION_FILE) rule out of ifeq and make tools rule depend on it to be
able to run 'make tools' from the unconfigured tree.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Ilya Yanok [Mon, 20 Jun 2011 12:45:37 +0000 (12:45 +0000)]
config.mk: move LDSCRIPT processing to the top-level Makefile
LDSCRIPT is used only from the top-level Makefile and only when the
system is configured so we can move LDSCRIPT and CONFIG_SYS_LDSCRIPT
related logic into the top level Makefile and under configured condition
to avoid errors when building tools from unconfigured tree.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Sun, 1 May 2011 18:44:23 +0000 (20:44 +0200)]
ARM: drop unsupported 'trab' board
The 'trab' board configuration is broken, and there is nobody who is
interested and willing to fix it. Drop it.
This includes support for VFD displays which have always been used by
this board only.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 22 Jun 2011 09:39:24 +0000 (11:39 +0200)]
Prepare v2011.06-rc3
Signed-off-by: Wolfgang Denk <wd@denx.de>
Sergey Lapin [Thu, 9 Jun 2011 05:45:31 +0000 (05:45 +0000)]
Build fix/update of
AFEB9260
Make
AFEB9260 build again.
Based on fix for AT91SAM9260EK.
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
andreas.devel@googlemail.com [Thu, 9 Jun 2011 02:08:46 +0000 (02:08 +0000)]
macb: fix compile warning
This patch fixes following compile warning:
---8<---
macb.c: In function 'macb_write_hwaddr':
macb.c:525:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
--->8---
Signed-off-by: Andreas Bießmann <andreas.devel@gmail.com>
andreas.devel@googlemail.com [Thu, 9 Jun 2011 00:22:54 +0000 (00:22 +0000)]
at91_emac: fix compile warning
This patch removes the warning
---8<---
at91_emac.c: In function 'at91emac_write_hwaddr':
at91_emac.c:487:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
--->8---
Signed-off-by: Andreas Bießmann <andreas.devel@gmail.com>
Eric Benard [Mon, 6 Jun 2011 22:48:26 +0000 (22:48 +0000)]
include/asm/arch-at91: update several .h files to ATMEL_xxx name scheme
Signed-off-by: Eric Bénard <eric@eukrea.com>
Eric Benard [Mon, 6 Jun 2011 22:48:29 +0000 (22:48 +0000)]
cpuat91: fix board support
Signed-off-by: Eric Bénard <eric@eukrea.com>
Eric Benard [Mon, 6 Jun 2011 22:48:28 +0000 (22:48 +0000)]
cpu9260/9G20: fix board support
Signed-off-by: Eric Bénard <eric@eukrea.com>
Eric Benard [Mon, 6 Jun 2011 22:48:27 +0000 (22:48 +0000)]
arm926ejs/at91/lowlevel_init.S: fix defines
atmel rework changed define names which broke this file
Signed-off-by: Eric Bénard <eric@eukrea.com>
Reinhard Meyer [Mon, 6 Jun 2011 00:05:56 +0000 (00:05 +0000)]
ATMEL spi_dataflash driver - fix to build again
The rework effort for ATMEL (AT91/AVR32) accidentially broke build of
this driver. Fix this to make it build again. However this driver should
be reworked as soon as possible!
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Mon, 6 Jun 2011 00:16:42 +0000 (00:16 +0000)]
AT91 rework: fix TOP9000 files to build again
Fix EMK TOP9000 board to build again:
- changes required due to ATMEL rework
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Mon, 6 Jun 2011 00:13:10 +0000 (00:13 +0000)]
AT91 rework: fix at91sam(9260/9g20/9xe)ek board port to build again:
Make ATMEL's at91sam9260/9g20/9xe-ek boards build again
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Ryan Mallon [Sun, 5 Jun 2011 07:21:22 +0000 (07:21 +0000)]
Add support for Bluewater Systems Snapper 9260/9G20 modules
Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
single board computer modules. Includes NAND flash and Ethernet
support.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Jens Scharsig [Sat, 19 Feb 2011 06:17:02 +0000 (06:17 +0000)]
update arm/at91rm9200 work with rework rework110202
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
* Fix: timer.c compile error io.h not found with arm/at91rm9200
* update arm920t/at91 to ATMEL_xxx name scheme
* update arm920t/at91 soc lib
* update at91_emac driver
Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Tested-by: Andreas Bießmann <andreas.devel@gmail.com>
Fabio Estevam [Wed, 15 Jun 2011 03:36:23 +0000 (03:36 +0000)]
mx31pdk: Add DHCP command
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Helmut Raiger [Wed, 15 Jun 2011 01:45:45 +0000 (01:45 +0000)]
mxc_spi.c: typo fixed
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Fabio Estevam [Sat, 11 Jun 2011 15:16:11 +0000 (15:16 +0000)]
imx31_phycore: Fix build by using new relocation scheme
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Sat, 11 Jun 2011 15:16:32 +0000 (15:16 +0000)]
mx1ads: Fix build by using new relocation scheme
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Stefano Babic [Thu, 9 Jun 2011 14:43:26 +0000 (16:43 +0200)]
MX31: QONG: drop config.mk
Remove obsolete config.mk from QONG board.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Aneesh V [Thu, 9 Jun 2011 12:54:57 +0000 (08:54 -0400)]
omap730p2: fix build breaks
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Aneesh V [Thu, 9 Jun 2011 12:54:55 +0000 (08:54 -0400)]
omap2420h4: fix build breaks
DRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Aneesh V [Thu, 9 Jun 2011 12:54:53 +0000 (08:54 -0400)]
omap1610inn: fix build breaks
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Aneesh V [Thu, 9 Jun 2011 12:54:51 +0000 (08:54 -0400)]
omap1510inn: fix build breaks
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Aneesh V [Thu, 9 Jun 2011 12:54:48 +0000 (08:54 -0400)]
omap5912osk: fix build breaks
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Aneesh V [Thu, 9 Jun 2011 12:54:45 +0000 (08:54 -0400)]
omap1610h2: fix build breaks
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Timur Tabi [Wed, 8 Jun 2011 17:10:49 +0000 (12:10 -0500)]
powerpc/p1022ds: set the clock-frequency prop only if the clock is enabled
The clock-frequency property in an audio codec's device tree node is set to
the input clock frequency for that codec. On the Freescale P1022DS board,
the input clock is enabled only if the hwconfig 'audclk' option is set.
Therefore, the property should only be set in the device tree if the clock
is actually enabled.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Wed, 8 Jun 2011 21:29:04 +0000 (23:29 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
SMDK6400: fix the compiler error
imx27lite: Remove local config.mk
mx31ads: Fix environment location on flash
imx31_litekit: Remove local config.mk
mx31litekit: Fix boot with the new relocation scheme.
mx31ads: Use the new relocation scheme
Minkyu Kang [Thu, 2 Jun 2011 21:27:01 +0000 (21:27 +0000)]
SMDK6400: fix the compiler error
This patch adds _end for fix following compiler error
arch/arm/cpu/arm1176/start.o: In function `_end_ofs':
arch/arm/cpu/arm1176/start.S:61: undefined reference to `_end'
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Fabio Estevam [Mon, 6 Jun 2011 05:25:20 +0000 (05:25 +0000)]
imx27lite: Remove local config.mk
Local board config.mk should be avoided.
Place CONFIG_SYS_TEXT_BASE definition into the board config file instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Felix Radensky [Mon, 6 Jun 2011 05:06:07 +0000 (05:06 +0000)]
mx31ads: Fix environment location on flash
At the moment u-boot and u-boot environment on flash
have overlapping addresses, so each u-boot update erases
the environment. Fix this by placing evironment right
after u-boot. Also, remove confusing comment about environment
location.
Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Fabio Estevam [Mon, 6 Jun 2011 03:13:36 +0000 (03:13 +0000)]
imx31_litekit: Remove local config.mk
Local board config.mk should be avoided.
Place CONFIG_SYS_TEXT_BASE definition into the board config file instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Sun, 5 Jun 2011 14:56:02 +0000 (14:56 +0000)]
mx31litekit: Fix boot with the new relocation scheme.
imx31_litekit has been converted to the new relocation scheme, but it does not boot.
Make the boot functional by using board_early_init_f .
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Fabio Estevam [Sun, 5 Jun 2011 06:26:49 +0000 (06:26 +0000)]
mx31ads: Use the new relocation scheme
This fixes the MX31ADS build by using the new relocation scheme.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Felix Radensky <felix@embedded-sol.com>
Harald Krapfenbauer [Tue, 17 May 2011 19:45:36 +0000 (15:45 -0400)]
Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update embedded env settings
The recent commit
ea882baf9c1 broke embedding environments in the middle
of a sector, so relocate it to the start of the 2nd sector.
Signed-off-by: Harald Krapfenbauer <harald.krapfenbauer@bluetechnix.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 16 May 2011 18:25:42 +0000 (14:25 -0400)]
Blackfin: boards: build zlib dir with -O2
Now that the zlib code has been relocated to a dedicated subdir, make
sure we still build it with -O2 for boards that want speed over size.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 9 May 2011 19:43:27 +0000 (15:43 -0400)]
Blackfin: bf548-ezkit/bf561-ezkit: update env location
Relocate the env to one of the small end sectors to avoid issues with
embedding it, such as support being broken (by recent commit
ea882baf9c1),
and for taking a while to save updates.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 30 Apr 2011 08:35:21 +0000 (04:35 -0400)]
Blackfin: use on-chip reset func with newer parts
Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset. So when the on-chip rom has a
functioning reset helper, use it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 8 Apr 2011 04:52:06 +0000 (00:52 -0400)]
Blackfin: use common LDSCRIPT logic
Now that common code is a bit smarter when it comes to default LDSCRIPT
values, rename the default Blackfin file and drop the Blackfin-specific
config.mk logic.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Thu, 2 Jun 2011 21:19:27 +0000 (23:19 +0200)]
Prepare v2011.06-rc2
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 2 Jun 2011 21:18:32 +0000 (23:18 +0200)]
Minor coding style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
Haojian Zhuang [Sun, 22 May 2011 21:53:30 +0000 (21:53 +0000)]
common/cmd_fdt.c: fix wrong data displayed in fdt print
All data in dtb is big endian. Some ARM devices are little-endian.
In print_data(), it displays data with big-endian format. For ARM device,
data should be converted to little-endian first.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Gerald Van Baren <vanbaren@cideas.com>
Luuk Paulussen [Mon, 16 May 2011 18:27:11 +0000 (18:27 +0000)]
sntp: avoid use of uninitialized variable
When we use the ntpserverip environment variable argv[1] may not be set.
Printing the error message using the NetNtpServerIP variable ensures the
correct output in both cases.
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
Patrick Sestier [Fri, 15 Apr 2011 14:25:25 +0000 (14:25 +0000)]
sf: kick watchdog when polling
The status polling can take a while, so make sure we kick the
watchdog after each successful poll.
Signed-off-by: Patrick Sestier <psestier@mircom.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Enric Balletbo i Serra [Tue, 31 May 2011 21:01:47 +0000 (21:01 +0000)]
net/net.c: Update ipaddr if the environment has changed
At least on ARM the ipaddr is only set in board_init_r function. The
problem is if ipaddr is not defined in environment importing another
environment defined don't update the ipaddr value.
For example, suppose we've a default environment without net variables
defined and we want to import an uEnv.txt environment from SD-card like
this:
ipaddr=192.168.2.240
netmask=255.255.255.0
gatewayip=192.168.2.1
serverip=192.168.2.114
Then if you try boot from NFS results in:
Importing environment from mmc ...
Running uenvcmd ...
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC ac:de:48:00:00:00
*** ERROR: `ipaddr' not set
The ipaddr at this point is NULL beacause is only set at board_init_r
function. This patch updates the ipaddr value if the environment has
changed.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Wed, 1 Jun 2011 20:16:21 +0000 (22:16 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
sh: sh7785lcr: Update BSC of USB area
Wolfgang Denk [Wed, 1 Jun 2011 20:16:19 +0000 (22:16 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
* 'master' of git://git.denx.de/u-boot-sh:
sh: sh7785lcr: Update BSC of USB area
Wolfgang Denk [Wed, 1 Jun 2011 20:04:29 +0000 (22:04 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
SMDKV310: Fix incorrect conditional compilation for MIU linear mapping
SMDKV310: CPU fequency and mmc_pre_ratio modified
armv7: Add support for ST-Ericsson U8500 href platform
I2C: Add driver for ST-Ericsson U8500 i2c
armv7: Add ST-Ericsson u8500 arch
Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT
ARMV7: Vexpress: Add missing MMC header
arm/km: update mgcoge3un board support
mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE
arm/km: rename mgcoge2un to mgcoge3un
arm/km: add second serial interface for kirkwood
arm/km: disable ls (through jffs2 support)
arm/km: introduce bootcount env variable and clean km_arm
arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file
arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h
ARMV7: MMC SPL Boot support for SMDKV310 board
ARMV7: Add support for Samsung SMDKV310 Board
S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)
S5P: add set_mmc_clk for external clock control
S5PC2XX: Support the cpu revision
S5P:SROM config code moved to s5p-common directory
Add _end for the end of u-boot image for SMDK6400
MMC S5P: Fix typo
S5P: GPIO Macro Values Corrected.
SMDK2410: various cleanup/code style fixes
SMDK2410: use the CFI driver (and remove the old one)
SMDK2410: remove unneeded config.mk
SMDK2410: activate ARM relocation feature
BeagleBoard: fixed typo in typecast
mvsata: issue hard reset on initialization
VCMA9: use ARM relocation feature to fix build error
MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
MX5: drop config.mk from efikamx board
MX31: Make get_reset_cause() static and drop unreachable code
MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
MX53: Handle silicon revision 2.1 case
mx5: board: code clean up for checkboard code
MX51: vision2: Fix build for vision2 board.
MX51: vision: Let video mode struct be independant of watchdog.
MX53: Add initial support for MX53SMD board.
MX53: support for freescale MX53LOCO board
mx5: Fix CONFIG_OF_LIBFDT redefined warning
mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
mx31pdk: Clean up mx31pdk.h file
Wolfgang Denk [Wed, 1 Jun 2011 20:04:12 +0000 (22:04 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
SMDKV310: Fix incorrect conditional compilation for MIU linear mapping
SMDKV310: CPU fequency and mmc_pre_ratio modified
armv7: Add support for ST-Ericsson U8500 href platform
I2C: Add driver for ST-Ericsson U8500 i2c
armv7: Add ST-Ericsson u8500 arch
Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT
ARMV7: Vexpress: Add missing MMC header
arm/km: update mgcoge3un board support
mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE
arm/km: rename mgcoge2un to mgcoge3un
arm/km: add second serial interface for kirkwood
arm/km: disable ls (through jffs2 support)
arm/km: introduce bootcount env variable and clean km_arm
arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file
arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h
ARMV7: MMC SPL Boot support for SMDKV310 board
ARMV7: Add support for Samsung SMDKV310 Board
S5PC2XX: clock: support pwm clock for evt1 (cpu revision 1)
S5P: add set_mmc_clk for external clock control
S5PC2XX: Support the cpu revision
S5P:SROM config code moved to s5p-common directory
Add _end for the end of u-boot image for SMDK6400
MMC S5P: Fix typo
S5P: GPIO Macro Values Corrected.
SMDK2410: various cleanup/code style fixes
SMDK2410: use the CFI driver (and remove the old one)
SMDK2410: remove unneeded config.mk
SMDK2410: activate ARM relocation feature
BeagleBoard: fixed typo in typecast
mvsata: issue hard reset on initialization
VCMA9: use ARM relocation feature to fix build error
MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
MX5: drop config.mk from efikamx board
MX31: Make get_reset_cause() static and drop unreachable code
MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
MX53: Handle silicon revision 2.1 case
mx5: board: code clean up for checkboard code
MX51: vision2: Fix build for vision2 board.
MX51: vision: Let video mode struct be independant of watchdog.
MX53: Add initial support for MX53SMD board.
MX53: support for freescale MX53LOCO board
mx5: Fix CONFIG_OF_LIBFDT redefined warning
mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
mx31pdk: Clean up mx31pdk.h file
Wolfgang Denk [Wed, 1 Jun 2011 20:01:10 +0000 (22:01 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
powerpc/fsl_pci: Fix device tree fixups for newer platforms
Wolfgang Denk [Wed, 1 Jun 2011 20:01:07 +0000 (22:01 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx:
powerpc/fsl_pci: Fix device tree fixups for newer platforms
Wolfgang Denk [Wed, 1 Jun 2011 19:59:27 +0000 (21:59 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
cmd_nand: fix help of nand erase subcommand
env_nand: zero-initialize variable nand_erase_options
projects / project / bcm63xx / u-boot.git / log