Evan Quan [Thu, 28 Dec 2017 06:37:58 +0000 (14:37 +0800)]
drm/amd/powerplay: set pp_num_states as 0 on error situation
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 4 Jan 2018 14:09:39 +0000 (15:09 +0100)]
drm/ttm: specify DMA_ATTR_NO_WARN for huge page pools
Suppress warning messages when allocating huge pages fails since we can
always fall back to normal pages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:34 +0000 (11:43 +0800)]
drm/ttm: remove ttm_bo_default_io_mem_pfn
No one will use this function except ttm_bo_io_mem_pfn() now, so move
the calculation of ttm_bo_default_io_mem_pfn() into ttm_bo_io_mem_pfn()
and do some cleanup.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:33 +0000 (11:43 +0800)]
staging: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yintian Tao [Thu, 4 Jan 2018 03:45:23 +0000 (11:45 +0800)]
drm/amd/powerplay: fix memory leakage when reload (v2)
add smu_free_memory when smu fini to prevent memory leakage
v2: squash in typo fix (Yintian) and warning (Harry)
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 1 Jan 2018 21:14:43 +0000 (16:14 -0500)]
drm/amdgpu/gfx9: only init the apertures used by KGD (v2)
Use adev->vm_manager.id_mgr[0].num_ids rather than hardcoded 16.
v2: use AMDGPU_GFXHUB rather than hardcoded 0 (Christian)
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Noticed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 20 Dec 2017 18:29:58 +0000 (13:29 -0500)]
drm/amdgpu: add atpx quirk handling (v2)
Add quirks for handling PX/HG systems. In this case, add
a quirk for a weston dGPU that only seems to properly power
down using ATPX power control rather than HG (_PR3).
v2: append a new weston XT
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> (v2)
Reviewed-and-Tested-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 21 Nov 2017 17:10:57 +0000 (12:10 -0500)]
drm/amdgpu: Add dpm quirk for Jet PRO (v2)
Fixes stability issues.
v2: clamp sclk to 600 Mhz
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 21 Nov 2017 17:09:38 +0000 (12:09 -0500)]
drm/radeon: Add dpm quirk for Jet PRO (v2)
Fixes stability issues.
v2: clamp sclk to 600 Mhz
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Arnd Bergmann [Mon, 8 Jan 2018 12:53:56 +0000 (13:53 +0100)]
drm/amdgpu: use %pap format string for phys_addr_t
The newly added get_local_mem_info() function prints a phys_addr_t
using 0x%llx, which is wrong on most 32-bit systems, as shown by
this warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c: In function 'get_local_mem_info':
include/linux/kern_levels.h:5:18: error: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'resource_size_t {aka unsigned int}' [-Werror=format=]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:297:31: note: format string is defined here
pr_debug("Address base: 0x%llx limit 0x%llx public 0x%llx private 0x%llx\n",
Passing the address by reference to the special %pap format string will
produce the correct output and avoid the warning.
Fixes: 30f1c0421ec5 ("drm/amdgpu: Implement get_local_mem_info")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 9 Jan 2018 00:24:17 +0000 (10:24 +1000)]
Merge tag 'drm-misc-next-2018-01-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.16:
Cross-subsystem Changes:
- some dt-binding changes for Ilitek and sun4i devices
Core Changes:
- panel_orientation_quirks: fix tainted kernel
Driver Changes:
- panel changes
- A83T and LVDS support to sun4i
* tag 'drm-misc-next-2018-01-08' of git://anongit.freedesktop.org/drm/drm-misc:
drm/panel: lvds: Add support for the power-supply property
dt-bindings: panel: lvds: Document power-supply property
drm/sun4i: Add A83T support
drm/sun4i: Add LVDS support
drm/sun4i: Create minimal multipliers and dividers
drm/sun4i: Force the mixer rate at 150MHz
dt-bindings: display: sun4i-drm: Add A83T pipeline
dt-bindings: display: sun4i-drm: Add LVDS properties
drm/tinydrm: add driver for ST7735R panels
dt-bindings: Add binding for Sitronix ST7735R display panels
dt-bindings: add jianda vendor prefix
drm/tinydrm: Update ILI9225 compatible string
dt-bindings: update compatible string for ILI9225
dt-bindings: Add "vot" vendor prefix
drm: fix tainted kernel caused by drm_panel_orientation_quirks.c
drm/panel: Add Ilitek ILI9322 driver
drm/panel: Add DT bindings for Ilitek ILI9322
Dave Airlie [Tue, 9 Jan 2018 00:09:13 +0000 (10:09 +1000)]
Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next
Last few updates for 4.16:
- Misc fixes for amdgpu
- Enable swapout for reserved BOs during allocation for ttm
- Misc cleanups for ttm
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (24 commits)
drm/amdgpu: Correct the IB size of bo update mapping.
drm/ttm: enable swapout for reserved BOs during allocation
drm/ttm: add new function to check if bo is allowable to evict or swapout
drm/ttm: use an operation ctx for ttm_tt_bind
drm/ttm: use an operation ctx for ttm_tt_populate in ttm_bo_driver (v2)
drm/ttm: use an operation ctx for ttm_mem_global_alloc_page
drm/ttm: use an operation ctx for ttm_mem_global_alloc
drm/ttm: call ttm_bo_swapout directly when ttm shrink
drm/vmwgfx: remove the default io_mem_pfn set
drm/virtio: remove the default io_mem_pfn set
drm/radeon: remove the default io_mem_pfn set
drm/qxl: remove the default io_mem_pfn set
drm/nouveau: remove the default io_mem_pfn set
drm/mgag200: remove the default io_mem_pfn set
drm/cirrus: remove the default io_mem_pfn set
drm/bochs: remove the default io_mem_pfn set
drm/ast: remove the default io_mem_pfn set
drm/ttm: add ttm_bo_io_mem_pfn to check io_mem_pfn
drm/amdgpu: fix VM faults with per VM BOs
drm/ttm: drop the spin in delayed delete if the trylock doesn't work
...
Maxime Ripard [Thu, 21 Dec 2017 11:02:28 +0000 (12:02 +0100)]
drm/panel: lvds: Add support for the power-supply property
A significant number of panels need to power up a regulator in order to
operate properly. Add support for the power-supply property to enable and
disable such a regulator whenever needed.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0c0819bdf88fa948188df95e57a10820a8a4548d.1513854122.git-series.maxime.ripard@free-electrons.com
Maxime Ripard [Thu, 21 Dec 2017 11:02:27 +0000 (12:02 +0100)]
dt-bindings: panel: lvds: Document power-supply property
The power-supply property is used by a vast majority of panels, including
panel-simple. Let's document it as a common property
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0a6a3abcf1a6b7f0e66a81af8a44c5c0566ce06c.1513854122.git-series.maxime.ripard@free-electrons.com
Dave Airlie [Fri, 5 Jan 2018 01:33:24 +0000 (11:33 +1000)]
Merge tag 'imx-drm-next-2018-01-02' of git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: format modifier support
- Add tiled prefetch support to PRE
- Add format modifier support to PRG and imx-drm-core
- Use runtime PM to control PRG clock
- Allow building ipu-v3 under COMPILE_TEST
* tag 'imx-drm-next-2018-01-02' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: allow to build with COMPILE_TEST
drm/imx: advertise supported plane format modifiers
drm/imx: add FB modifier support
gpu: ipu-v3: prg: add modifier support
gpu: ipu-v3: pre: add tiled prefetch support
gpu: ipu-v3: prg: switch to runtime PM
Dave Airlie [Thu, 4 Jan 2018 23:43:46 +0000 (09:43 +1000)]
Merge branch 'drm-armada-devel-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
This series builds upon the set of fixes previously submitted to move
Armada DRM closer to atomic modeset. We're nowhere near yet, but this
series helps to get us closer by unifying some of the differences
between the primary and overlay planes.
New features added allows userspace to disable the primary plane if
overlay is full screen and there's nothing obscuring the colorkey -
this saves having to fetch an entire buffer containing nothing but
colorkey when displaying full screen video.
[airlied: fixup for atomic plane helper rename:
a01cb8ba3f6282934cff65e89ab36b18b14cbe27
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Nov 1 22:16:19 2017 +0200
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
]
* 'drm-armada-devel-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm: (29 commits)
drm/armada: expand overlay trace entry
drm/armada: implement primary plane update
drm/armada: extract register generation from armada_drm_primary_set()
drm/armada: wait for previous work when moving overlay window
drm/armada: move overlay plane register update generation
drm/armada: re-organise overlay register update generation
drm/armada: disable planes at next blanking period
drm/armada: avoid work allocation
drm/armada: allow armada_drm_plane_work_queue() to silently fail
drm/armada: use drm_plane_helper_check_state()
drm/armada: only enable HSMOOTH if scaling horizontally
drm/armada: move writes of LCD_SPU_SRAM_PARA1 under lock
drm/armada: move regs into armada_plane_work
drm/armada: move event sending into armada_plane_work
drm/armada: move fb retirement into armada_plane_work
drm/armada: move overlay plane work out from under spinlock
drm/armada: clear plane enable bit when disabling
drm/armada: clean up armada_drm_crtc_plane_disable()
drm/armada: allow the primary plane to be disabled
drm/armada: wait and cancel any pending frame work at disable
...
Dave Airlie [Thu, 4 Jan 2018 23:42:04 +0000 (09:42 +1000)]
Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
Highlights this time:
1. Fix for a nasty Kconfig dependency chain issue from Philipp.
2. Occlusion query buffer address added to the cmdstream validator by
Christian.
3. Fixes and cleanups to the job handling from me. This allows us to
turn on the GPU performance profiling added in the last cycle.
It is also prep work for hooking in the DRM GPU scheduler, which I hope
to land for the next cycle.
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (32 commits)
drm/etnaviv: use memset32 to init pagetable
drm/etnaviv: move submit free out of critical section
drm/etnaviv: re-enable perfmon support
drm/etnaviv: couple runtime PM management to submit object lifetime
drm/etnaviv: move GPU active handling to bo pin/unpin
drm/etnaviv: move cmdbuf into submit object
drm/etnaviv: use submit exec_state for perfmon sampling
drm/etnaviv: move exec_state to submit object
drm/etnaviv: move PMRs to submit object
drm/etnaviv: refcount the submit object
drm/etnaviv: move ww_acquire_ctx out of submit object
drm/etnaviv: move object unpinning to submit cleanup
drm/etnaviv: attach in fence to submit and move fence wait to fence_sync
drm/etnaviv: rename submit fence to out_fence
drm/etnaviv: move object fence attachment to gem_submit path
drm/etnaviv: simplify submit_create
drm/etnaviv: add lockdep annotations to buffer manipulation functions
drm/etnaviv: hold GPU lock while inserting END command
drm/etnaviv: move workqueue to be per GPU
drm/etnaviv: remove switch_context member from etnaviv_gpu
...
Dave Airlie [Thu, 4 Jan 2018 23:29:20 +0000 (09:29 +1000)]
Merge tag 'exynos-drm-next-for-v4.16' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
Remove lagacy IPP driver
- This driver isn't used anymore so remove it. Marek is preparing new one
which includes completely rewritten API so this driver will be replaced
with the new version[1] later.
And cleanups.
[1] https://patches.linaro.org/cover/118386/
* tag 'exynos-drm-next-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: ipp: Remove Exynos DRM IPP subsystem
drm/exynos/decon: Add include guard to the Exynos7 header
drm/exynos/decon: Move headers from global to local place
drm/exynos: decon5433: Remove unnecessary platform_get_resource() error check
Dave Airlie [Thu, 4 Jan 2018 23:27:49 +0000 (09:27 +1000)]
Merge tag 'drm-amdkfd-next-2017-12-24' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- Add CWSR (compute wave save restore) support for GFX8 (Carrizo)
- Fix SDMA user-mode queues support for GFX7 (Kaveri)
- Add SDMA user-mode queues support for GFX8 (Carrizo)
- Allow HWS (hardware scheduling) to schedule multiple processes concurrently
- Add debugfs support
- Simplify process locking and lock dependencies
- Refactoring topology code to prepare for dGPU support + fixes to that code
- Add option to generate dummy/virtual CRAT table when its missing or deformed
- Recognize CPUs other then APUs as compute entities
- Various clean ups and bug fixes
I have not yet sent the dGPU topology code because it depends on a patch
for the PCI subsystem that adds PCIe atomics support. Once that patch is
upstreamed we can continue with the rest of the dGPU code.
* tag 'drm-amdkfd-next-2017-12-24' of git://people.freedesktop.org/~gabbayo/linux: (53 commits)
drm/amdgpu: Add support for reporting VRAM usage
drm/amdkfd: Ignore ACPI CRAT for non-APU systems
drm/amdkfd: Module option to disable CRAT table
drm/amdkfd: Add AQL Queue Memory flag on topology
drm/amdkfd: Fixup incorrect info in the CZ CRAT table
drm/amdkfd: Add perf counters to topology
drm/amdkfd: Add topology support for dGPUs
drm/amdkfd: Add topology support for CPUs
drm/amdkfd: Fix sibling_map[] size
drm/amdkfd: Simplify counting of memory banks
drm/amdkfd: Turn verbose topology messages into pr_debug
drm/amdkfd: sync IOLINK defines to thunk spec
drm/amdkfd: Support enumerating non-GPU devices
drm/amdkfd: Decouple CRAT parsing from device list update
drm/amdkfd: Reorganize CRAT fetching from ACPI
drm/amdkfd: Group up CRAT related functions
drm/amdkfd: Fix memory leaks in kfd topology
drm/amdkfd: Topology: Fix location_id
drm/amdkfd: Update number of compute unit from KGD
drm/amd: Remove get_vmem_size from KGD-KFD interface
...
Maxime Ripard [Thu, 21 Dec 2017 11:02:34 +0000 (12:02 +0100)]
drm/sun4i: Add A83T support
Add support for the A83T display pipeline.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/614b430adf3a67320362a75c01b01bd53013da8a.1513854122.git-series.maxime.ripard@free-electrons.com
Maxime Ripard [Thu, 21 Dec 2017 11:02:33 +0000 (12:02 +0100)]
drm/sun4i: Add LVDS support
The TCON supports the LVDS interface to output to a panel or a bridge.
Let's add support for it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7fbb85f33ee1d5009fde4f0d7d236e11ca58b114.1513854122.git-series.maxime.ripard@free-electrons.com
Maxime Ripard [Thu, 21 Dec 2017 11:02:32 +0000 (12:02 +0100)]
drm/sun4i: Create minimal multipliers and dividers
The various outputs the TCON can provide have different constraints on the
dotclock divider. Let's make them configurable by the various mode_set
functions.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/92ff5881c8f8674056d34458b2f264cd48d4e136.1513854122.git-series.maxime.ripard@free-electrons.com
Maxime Ripard [Thu, 21 Dec 2017 11:02:31 +0000 (12:02 +0100)]
drm/sun4i: Force the mixer rate at 150MHz
It seems like the mixer can only run properly when clocked at 150MHz. In
order to have something more robust than simply a fire-and-forget
assigned-clocks-rate, let's put that in the code.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f5f05307972ed05250e8094b302d68b9e7e167f6.1513854122.git-series.maxime.ripard@free-electrons.com
Maxime Ripard [Thu, 21 Dec 2017 11:02:30 +0000 (12:02 +0100)]
dt-bindings: display: sun4i-drm: Add A83T pipeline
The A83T has two video pipelines in parallel that looks quite similar to
the other SoCs.
The video planes are handled through a controller called the mixer, and the
video signal is then passed to the timing controller (TCON).
And while there is two instances of the mixers and TCONs, they have a
significant number of differences. The TCONs are quite easy to deal with,
one is supposed to generate TV (in the broader term, so including things
like HDMI) signals, the other one LCD (so RGB, LVDS, DSI) signals. And
while they are called TCON0 and TCON1 in the A83t datasheet, newer SoCs
call them TCON-TV and TCON-LCD, which seems more appropriate.
However, the mixers differ mostly by their capabilities, with some features
being available only in the first one, or the number of planes they expose,
but also through their register layout. And while the capabilities could be
represented as properties, the register layout differences would need to
express all the registers offsets as properties, which is usually quite
bad. Especially since documentation on that hardware block is close to
non-existent and we don't even have the list of all those registers in the
first place.
So let's call them mixer 0 and 1 in our compatibles, even though the name
is pretty bad...
At the moment, we only have tested the code on a board that has a single
display output, so we're leaving the tcon-tv and mixer1 out.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2702a5c1d224af1c51743492ad1b917966f2ad43.1513854122.git-series.maxime.ripard@free-electrons.com
Maxime Ripard [Thu, 21 Dec 2017 11:02:29 +0000 (12:02 +0100)]
dt-bindings: display: sun4i-drm: Add LVDS properties
Some clocks and resets supposed to drive the LVDS logic in the display
engine have been overlooked when the driver was first introduced.
Add those additional resources to the binding, and we'll deal with the ABI
stability in the code.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ddbde28fe2e4f21412974e4c69fbfe1c5ff9383f.1513854122.git-series.maxime.ripard@free-electrons.com
David Lechner [Mon, 1 Jan 2018 19:02:16 +0000 (13:02 -0600)]
drm/tinydrm: add driver for ST7735R panels
This adds a new driver for Sitronix ST7735R display panels.
This has been tested using an Adafruit 1.8" TFT.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1514833336-22564-4-git-send-email-david@lechnology.com
David Lechner [Mon, 1 Jan 2018 19:02:15 +0000 (13:02 -0600)]
dt-bindings: Add binding for Sitronix ST7735R display panels
This adds a new device tree binding for Sitronix ST7735R display panels,
such as the Adafruit 1.8" TFT.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1514833336-22564-3-git-send-email-david@lechnology.com
David Lechner [Mon, 1 Jan 2018 19:02:14 +0000 (13:02 -0600)]
dt-bindings: add jianda vendor prefix
This adds a vendor prefix "jianda" for Jiandangjing Technology Co., Ltd.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1514833336-22564-2-git-send-email-david@lechnology.com
David Lechner [Thu, 21 Dec 2017 18:33:07 +0000 (12:33 -0600)]
drm/tinydrm: Update ILI9225 compatible string
This updates the compatible string for a no-name LCD panel to
"vot,v220hf01a-t", "ilitek,ili9225".
The original bindings were the generic "ilitek,ili9225-2.2in-176x220"
because I could not find a datasheet. However, after some more research,
I finally found one, so the actual vendor and model name are now known.
This previous bindings have not made it to the mainline kernel yet, so
this is not breaking backwards compatibility.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1513881187-3197-4-git-send-email-david@lechnology.com
David Lechner [Thu, 21 Dec 2017 18:33:06 +0000 (12:33 -0600)]
dt-bindings: update compatible string for ILI9225
This updates the compatible string for a no-name LCD panel to
"vot,v220hf01a-t", "ilitek,ili9225".
The original bindings [1] were the generic "ilitek,ili9225-2.2in-176x220"
because I could not find a datasheet. However, after some more research,
I finally found one, so the actual vendor and model name are now known.
This previous bindings have not made it to the mainline kernel yet, so
this is not breaking backwards compatibility.
This is also following the precedence of the ILI9322 bindings [2] by using
the pattern "vendor,specific-system-config", "vendor,ip-part";
[1]: https://patchwork.ozlabs.org/patch/839352/
[2]: https://patchwork.ozlabs.org/patch/843576/
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1513881187-3197-3-git-send-email-david@lechnology.com
David Lechner [Thu, 21 Dec 2017 18:33:05 +0000 (12:33 -0600)]
dt-bindings: Add "vot" vendor prefix
This adds a vendor prefix "vot" for Vision Optical Technology Co., Ltd.
They make LCD displays.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1513881187-3197-2-git-send-email-david@lechnology.com
Lucas Stach [Mon, 27 Nov 2017 14:33:28 +0000 (15:33 +0100)]
drm/etnaviv: use memset32 to init pagetable
Now that memset32 is available, the open-coded pagetable initialization
loop can be replaced.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Wed, 29 Nov 2017 13:33:57 +0000 (14:33 +0100)]
drm/etnaviv: move submit free out of critical section
There is no need to hold the GPU lock while freeing the submit
object. Only move the retired submits from the GPU active list to
a temporary retire list under the GPU lock.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 11:13:25 +0000 (12:13 +0100)]
drm/etnaviv: re-enable perfmon support
Now that the PMR lifetime issues are solved we can safely re-enable
performance counter profiling support.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 16:56:29 +0000 (17:56 +0100)]
drm/etnaviv: couple runtime PM management to submit object lifetime
As long as there is an active submit, we want the GPU to stay awake. This
is slightly complicated by the fact that we really want to wake the GPU
at the last possible moment to achieve maximum power savings.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Mon, 27 Nov 2017 16:46:15 +0000 (17:46 +0100)]
drm/etnaviv: move GPU active handling to bo pin/unpin
The active count is used to check if the BO is idle, where idle is defined
as not active on the GPU and all VM mappings and reference counts dropped
to the initial state. As the idling of the mappings and references now only
happens in the submit cleanup, the active state handling must be moved to
the same location in order to keep the userspace semantics.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 15:56:37 +0000 (16:56 +0100)]
drm/etnaviv: move cmdbuf into submit object
Less dynamic allocations and slims down the cmdbuf object to only the
required information, as everything else is already available in the
submit object.
This also simplifies buffer and mappings lifetime management, as they
are now exlusively attached to the submit object and not additionally
to the cmdbuf.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 14:19:16 +0000 (15:19 +0100)]
drm/etnaviv: use submit exec_state for perfmon sampling
The GPU exec state may have changed at the time when the perfmon sampling
is done, as it reflects the state of the last submission, not the current
GPU execution state.
So for proper sampling we must use the submit exec_state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 14:16:58 +0000 (15:16 +0100)]
drm/etnaviv: move exec_state to submit object
We'll need this in some places where only the submit is available. Also
this is a first step at slimming down the cmdbuf object.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 11:02:38 +0000 (12:02 +0100)]
drm/etnaviv: move PMRs to submit object
To make them available to the event worker even after the actual
command stream execution has finished.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 10:36:03 +0000 (11:36 +0100)]
drm/etnaviv: refcount the submit object
The submit object lifetime will get extended to the actual GPU
execution. As multiple users will depend on this, add a kref to
properly control destruction of the object.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 13:34:46 +0000 (14:34 +0100)]
drm/etnaviv: move ww_acquire_ctx out of submit object
The acquire_ctx is special in that it needs to be released from the same
thread as has been used to initialize it. This collides with the intention to
extend the submit lifetime beyond the gem_submit function with potentially
other threads doing the final cleanup.
Move the ww_acquire_ctx to the function local stack as suggested in the
documentation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Thu, 23 Nov 2017 17:13:40 +0000 (18:13 +0100)]
drm/etnaviv: move object unpinning to submit cleanup
This is safe to call in all paths, as the BO_PINNED flag tells us if the BO
needs unpinning.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Thu, 23 Nov 2017 17:02:43 +0000 (18:02 +0100)]
drm/etnaviv: attach in fence to submit and move fence wait to fence_sync
Simplifies the cleanup path and moves fence waiting to a central location.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Thu, 23 Nov 2017 16:57:12 +0000 (17:57 +0100)]
drm/etnaviv: rename submit fence to out_fence
This is the fence passed out on a sucessful GPU submit. Make the name
more clear.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Thu, 23 Nov 2017 16:49:59 +0000 (17:49 +0100)]
drm/etnaviv: move object fence attachment to gem_submit path
The object fencing has nothing to do with the actual GPU buffer submit,
so move it to the gem submit path to have a cleaner split.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Fri, 24 Nov 2017 09:43:07 +0000 (10:43 +0100)]
drm/etnaviv: simplify submit_create
Use kzalloc so other code doesn't need to worry about uninitialized members.
Drop the non-standard GFP flags, as we really don't want to fail the submit
when under slight memory pressure. Remove one level of indentation by using
an early return if the allocation failed. Also remove the unused drm device
member.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Fri, 17 Nov 2017 16:51:19 +0000 (17:51 +0100)]
drm/etnaviv: add lockdep annotations to buffer manipulation functions
When manipulating the kernel command buffer the GPU mutex must be held, as
otherwise different callers might try to replace the same part of the
buffer, wreacking havok in the GPU execution.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Fri, 17 Nov 2017 16:59:26 +0000 (17:59 +0100)]
drm/etnaviv: hold GPU lock while inserting END command
Inserting the END command when suspending the GPU is changing the
command buffer state, which requires the GPU to be held.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 17 Nov 2017 16:43:37 +0000 (17:43 +0100)]
drm/etnaviv: move workqueue to be per GPU
While the etnaviv workqueue needs to be ordered, as we rely on work items
being executed in queuing order, this is only true for a single GPU.
Having a shared workqueue for all GPUs in the system limits concurrency
artificially.
Getting each GPU its own ordered workqueue still meets our ordering
expectations and enables retire workers to run concurrently.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Fri, 17 Nov 2017 16:19:50 +0000 (17:19 +0100)]
drm/etnaviv: remove switch_context member from etnaviv_gpu
There is no need to store this in the gpu struct. MMU flushes are triggered
correctly in reaction to MMU maps and unmaps, independent of the current ctx.
Any required pipe switches can be infered from the current and the desired
GPU exec state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 17 Nov 2017 15:35:32 +0000 (16:35 +0100)]
drm/etnaviv: don't flush workqueue in etnaviv_gpu_wait_obj_inactive
There is no need to synchronize with oustanding retire jobs if the object
has gone idle. Retire jobs only ever change the object state from active to
idle, not the other way around.
The IOVA put race is uncritical, as the GEM_WAIT ioctl itself is holding
a reference to the GEM object, so the retire worker will not pull the
object into the CPU domain, which is the thing we are trying to guard
against with etnaviv_gpu_wait_obj_inactive. The ordering of the various
counts and waits may change a bit, but the userspace visible behavior at
the bounds of the syscall are unchanged.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Fri, 17 Nov 2017 14:09:05 +0000 (15:09 +0100)]
drm/etnaviv: remove stale TODO in etnaviv_gpu_submit
Flush and prefetch are properly handled in the buffer code, data endianess
would need much wider changes than adding something to this single function.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 17 Nov 2017 13:24:34 +0000 (14:24 +0100)]
drm/etnaviv: remove -EAGAIN handling from submit path
Now that the userptr BO handling doesn't rely on the userspace restarting
the submit after object population, there is no need to special case the
-EAGAIN return value anymore.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Fri, 17 Nov 2017 13:16:10 +0000 (14:16 +0100)]
drm/etnaviv: get rid of userptr worker
All code paths which populate userptr BOs are fine with the get_pages
function taking the mmap_sem lock. This allows to get rid of the pretty
involved architecture with a worker being scheduled if the mmap_sem
needs to be taken, but instead call GUP directly and allow it to take
the lock if necessary.
This simplifies the code a lot and removes the possibility of this
function returning -EAGAIN, which complicates object population
handling at the callers.
A notable change in behavior is that we don't allow a process to populate
objects with user pages from a foreign MM anymore. This would have been an
invalid use before, as it breaks the assumptions made in the etnaviv kernel
driver to enfore cache coherence. We now disallow this by rejecting the
request to populate those objects. Well behaving userspace is unaffected by
this change.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Lucas Stach [Fri, 17 Nov 2017 11:17:14 +0000 (12:17 +0100)]
drm/etnaviv: change return type of etnaviv_gem_obj_add to void
This function never fails, as it does nothing more than adding the GEM
object to the global device list. Making this explicit through the void
return type allows to drop some unnecessary error handling.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Fri, 17 Nov 2017 11:11:25 +0000 (12:11 +0100)]
drm/etnaviv: fold __etnaviv_gem_new into caller
This function has only one caller and it isn't expected that there will
be any more in the future. Folding this function into the caller is
helping the readability.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 17 Nov 2017 10:23:17 +0000 (11:23 +0100)]
drm/etnaviv: add lockdep annotation for userptr object population
The current userptr page population will defer work to a work item if
needed to avoid ever taking the mmap_sem in the direct call path. With
the more fine-grained locking in etnaviv this isn't needed anymore, so
a future commit will simplify this code.
Add a lockdep annotation to validate the assumption that the mmap_sem
can be taken in the direct call path.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Lucas Stach [Fri, 17 Nov 2017 10:14:58 +0000 (11:14 +0100)]
drm/etnaviv: split obj locks in different classes depending on the obj type
Userptr, prime and shmem buffer objects have different lock ordering
requirements. This is mostly due to the fact that we don't allow to mmap
userptr buffers, so we won't ever end up in our fault handler for those,
so some of the code paths are never called with the mmap_sem held.
To avoid lockdep false positives, split them up into different lock classes.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Lucas Stach [Thu, 19 Oct 2017 11:48:40 +0000 (13:48 +0200)]
drm/etnaviv: fix GPU vs sync point race
If the FE is restarted before the sync point event is cleared, the GPU
might trigger a completion IRQ for the next sync point, corrupting
the state of the currently running worker.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Marek Szyprowski [Thu, 14 Dec 2017 15:10:15 +0000 (16:10 +0100)]
drm/exynos: ipp: Remove Exynos DRM IPP subsystem
Exynos DRM IPP subsystem is in fact non-functional and frankly speaking
dead-code. This patch clearly marks that Exynos DRM IPP subsystem is
broken and never really functional. It will be replaced by a completely
rewritten API.
Exynos DRM IPP user-space API can be obsoleted for the following
reasons:
1. Exynos DRM IPP user-space API can be optional in Exynos DRM, so
userspace should not rely that it is always available and should have
a software fallback in case it is not there.
2. The only mode which was initially semi-working was memory-to-memory
image processing. The remaining modes (LCD-"writeback" and "output")
were never operational due to missing code (both in mainline and even
vendor kernels).
3. Exynos DRM IPP mainline user-space API compatibility for
memory-to-memory got broken very early by commit
083500baefd5 ("drm:
remove DRM_FORMAT_NV12MT", which removed the support for tiled formats,
the main feature which made this API somehow useful on Exynos platforms
(video codec that time produced only tiled frames, to implement xvideo
or any other video overlay, one has to de-tile them for proper
display).
4. Broken drivers. Especially once support for IOMMU has been added,
it revealed that drivers don't configure DMA operations properly and in
many cases operate outside the provided buffers trashing memory around.
5. Need for external patches. Although IPP user-space API has been used
in some vendor kernels, but in such cases there were additional patches
applied (like reverting mentioned
083500baefd5 patch) what means that
those userspace apps which might use it, still won't work with the
mainline kernel version.
We don't have time machines, so we cannot change it, but Exynos DRM IPP
extension should never have been merged to mainline in that form.
Exynos IPP subsystem and user-space API will be rewritten, so remove
current IPP core code and mark existing drivers as BROKEN.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Krzysztof Kozlowski [Tue, 26 Dec 2017 13:07:19 +0000 (14:07 +0100)]
drm/exynos/decon: Add include guard to the Exynos7 header
Although header is included only once but still having an include guard
is a good practice. To avoid confusion, add SoC prefix to existing
Exynos5433 header include guard.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Krzysztof Kozlowski [Tue, 26 Dec 2017 13:07:18 +0000 (14:07 +0100)]
drm/exynos/decon: Move headers from global to local place
The DECON headers contain only defines for registers. There are no
other drivers using them so this should be put locally to the Exynos DRM
driver. Keeping headers local helps managing the code.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fabio Estevam [Mon, 18 Dec 2017 13:02:25 +0000 (11:02 -0200)]
drm/exynos: decon5433: Remove unnecessary platform_get_resource() error check
devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Emily Deng [Fri, 29 Dec 2017 05:13:08 +0000 (13:13 +0800)]
drm/amdgpu: Correct the IB size of bo update mapping.
The amdgpu_vm_frag_ptes will call amdgpu_vm_update_ptes, and for buffer
object that has shadow buffer, need twice commands.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Thu, 21 Dec 2017 09:42:53 +0000 (17:42 +0800)]
drm/ttm: enable swapout for reserved BOs during allocation
if the bo shares same reservation object then not lock it again
at swapout time to make it possible to swap out.
v2: refine the commmit message
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chuming Zhou <david1.zhou@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Thu, 21 Dec 2017 09:42:52 +0000 (17:42 +0800)]
drm/ttm: add new function to check if bo is allowable to evict or swapout
extract a function as ttm_bo_evict_swapout_allowable since eviction and
swapout can share same logic.
v2: modify commit message and add description in the code
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chuming Zhou <david1.zhou@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Thu, 21 Dec 2017 09:42:51 +0000 (17:42 +0800)]
drm/ttm: use an operation ctx for ttm_tt_bind
forward the operation context to ttm_tt_bind as well,
and the ultimate goal is swapout enablement for reserved BOs.
v2: use common term rather than amd specific
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chuming Zhou <david1.zhou@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Thu, 21 Dec 2017 09:42:50 +0000 (17:42 +0800)]
drm/ttm: use an operation ctx for ttm_tt_populate in ttm_bo_driver (v2)
forward the operation context to ttm_tt_populate as well,
and the ultimate goal is swapout enablement for reserved BOs.
v2: squash in fix for vboxvideo
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Wed, 27 Dec 2017 19:20:31 +0000 (05:20 +1000)]
Merge tag 'drm-intel-next-2017-12-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Allow internal page allocation to fail (Chris)
- More improvements on logs, dumps, and trace (Chris, Michal)
- Coffee Lake important fix for stolen memory (Lucas)
- Continue to make GPU reset more robust as well
improving selftest coverage for it (Chris)
- Unifying debugfs return codes (Michal)
- Using existing helper for testing obj pages (Matthew)
- Organize and improve gem_request tracepoints (Lionel)
- Protect DDI port to DPLL map from theoretical race (Rodrigo)
- ... and consequently fixing the indentation on this DDI clk selection function (Chris)
- ... and consequently properly serializing non-blocking modesets (Ville)
- Add support for horizontal plane flipping on Cannonlake (Joonas)
- Two Cannonlake Workarounds for better stability (Rafael)
- Fix mess around PSR registers (DK)
- More Coffee Lake PCI IDs (Rodrigo)
- Remove CSS modifiers on pipe C of Geminilake (Krisman)
- Disable all planes for load detection (Ville)
- Reorg on i915 display headers (Michal)
- Avoid enabling movntdqa optimization on hypervisor guest (Changbin)
GVT:
- more mmio switch optimization (Weinan)
- cleanup i915_reg_t vs. offset usage (Zhenyu)
- move write protect handler out of mmio handler (Zhenyu)
* tag 'drm-intel-next-2017-12-22' of git://anongit.freedesktop.org/drm/drm-intel: (55 commits)
drm/i915: Update DRIVER_DATE to
20171222
drm/i915: Show HWSP in intel_engine_dump()
drm/i915: Assert that the request is on the execution queue before being removed
drm/i915/execlists: Show preemption progress in GEM_TRACE
drm/i915: Put all non-blocking modesets onto an ordered wq
drm/i915: Disable GMBUS clock gating around GMBUS transfers on gen9+
drm/i915: Clean up the PNV bit banging vs. GMBUS clock gating w/a
drm/i915: No need to power up PG2 for GMBUS on BXT
drm/i915: Disable DC states around GMBUS on GLK
drm/i915: Do not enable movntdqa optimization in hypervisor guest
drm/i915: Dump device info at once
drm/i915: Add pretty printer for runtime part of intel_device_info
drm/i915: Update intel_device_info_runtime_init() parameter
drm/i915: Move intel_device_info definitions to its own header
drm/i915: Move opregion definitions to dedicated intel_opregion.h
drm/i915: Move display related definitions to dedicated header
drm/i915: Move some utility functions to i915_util.h
drm/i915/gvt: move write protect handler out of mmio emulation function
drm/i915/gvt: cleanup usage for typed mmio reg vs. offset
drm/i915/gvt: Fix pipe A enable as default for vgpu
...
Roger He [Fri, 8 Dec 2017 07:21:18 +0000 (15:21 +0800)]
drm/ttm: use an operation ctx for ttm_mem_global_alloc_page
forward the operation context to ttm_mem_global_alloc_page as well,
and the ultimate goal is swapout enablement for reserved BOs.
Here reserved BOs refer to all the BOs which share same reservation object
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Fri, 8 Dec 2017 07:09:50 +0000 (15:09 +0800)]
drm/ttm: use an operation ctx for ttm_mem_global_alloc
forward the operation context to ttm_mem_global_alloc as well, and the
ultimate goal is swapout enablement for reserved BOs
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Mon, 18 Dec 2017 11:50:08 +0000 (19:50 +0800)]
drm/ttm: call ttm_bo_swapout directly when ttm shrink
remove the extra indirection because we have only one implementation anyway
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:32 +0000 (11:43 +0800)]
drm/vmwgfx: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:31 +0000 (11:43 +0800)]
drm/virtio: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:30 +0000 (11:43 +0800)]
drm/radeon: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:29 +0000 (11:43 +0800)]
drm/qxl: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:28 +0000 (11:43 +0800)]
drm/nouveau: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:27 +0000 (11:43 +0800)]
drm/mgag200: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:26 +0000 (11:43 +0800)]
drm/cirrus: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:25 +0000 (11:43 +0800)]
drm/bochs: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:24 +0000 (11:43 +0800)]
drm/ast: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tan Xiaojun [Mon, 25 Dec 2017 03:43:23 +0000 (11:43 +0800)]
drm/ttm: add ttm_bo_io_mem_pfn to check io_mem_pfn
The io_mem_pfn field was added in commit
ea642c3216cb ("drm/ttm: add
io_mem_pfn callback") and is called unconditionally. However, not all
drivers were updated to set it.
Use the ttm_bo_default_io_mem_pfn function if a driver did not set its
own. And add new function ttm_bo_io_mem_pfn() as wrapper.
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 22 Dec 2017 16:13:03 +0000 (17:13 +0100)]
drm/amdgpu: fix VM faults with per VM BOs
There was a small window between unreserve and second reserve where the
freshly allocated BO could have been evicted without the VM noticing it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 21 Dec 2017 18:04:15 +0000 (19:04 +0100)]
drm/ttm: drop the spin in delayed delete if the trylock doesn't work
Thomas actually noticed that, but I didn't realized what he meant until
now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 21 Dec 2017 10:38:47 +0000 (18:38 +0800)]
drm/amd/pp: Get and save CZ/ST smu version
The smu firmware is loaded by the sbios on APUs, so query it
from the smu and save the smu fw version info that is reported
to userspace.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 18 Dec 2017 16:10:01 +0000 (17:10 +0100)]
drm/amdgpu: drop client_id from VM
Use the fence context from the scheduler entity.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 18 Dec 2017 16:08:25 +0000 (17:08 +0100)]
drm/amdgpu: rename vm_id to vmid
sed -i "s/vm_id/vmid/g" drivers/gpu/drm/amd/amdgpu/*.c
sed -i "s/vm_id/vmid/g" drivers/gpu/drm/amd/amdgpu/*.h
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 18 Dec 2017 15:53:03 +0000 (16:53 +0100)]
drm/amdgpu: separate VMID and PASID handling
Move both into the new files amdgpu_ids.[ch]. No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Lechner [Thu, 21 Dec 2017 18:46:19 +0000 (12:46 -0600)]
drm: fix tainted kernel caused by drm_panel_orientation_quirks.c
drm_panel_orientation_quirks.c introduced in commit
404d1a3edc38 ("drm:
Add panel orientation quirks, v6.") taints the kernel when compiled as a
module. Fix this by adding MODULE_LICENSE().
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513881979-13801-1-git-send-email-david@lechnology.com
Rodrigo Vivi [Fri, 22 Dec 2017 19:41:50 +0000 (11:41 -0800)]
drm/i915: Update DRIVER_DATE to
20171222
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Fri, 22 Dec 2017 18:25:21 +0000 (18:25 +0000)]
drm/i915: Show HWSP in intel_engine_dump()
Looking at a CI failure with an ominous line of
[ 362.550715] hangcheck current seqno
ffffff6b, last
ffffff8c, hangcheck
ffffff6b [6016 ms], inflight 118
with no apparent cause for the seqno to be negative, left me wondering
if someone had scribbled over the HWSP. So include the HWSP in the
engine dump to see if there are more signs of random scribbling.
v2: Fix row pointer, i is now incremented by 8 so doesn't need scaling
by 8, and we don't need to keep volatile here as the status_page isn't
marked up as volatile itself.
v3: Use hexdump, with suppression of identical lines. (Tvrtko)
Which results in
HWSP:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
*
00000040 00000001 00000000 00000018 00000002 00000001 00000000 00000018 00000000
00000060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000003
00000080 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
*
000000c0 00000002 00000000 00000000 00000000 00000000 00000000 00000000 00000000
000000e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
*
instead of 128 lines of mostly 0s.
v4: Tidy up the locals
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222182521.18106-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Fri, 22 Dec 2017 14:19:59 +0000 (14:19 +0000)]
drm/i915: Assert that the request is on the execution queue before being removed
We should only attempt to remove requests from the execution queue that
are on the execution queue. These are the requests that have been
assigned a global_seqno, so we can assert that we only attempt to remove
requests with a nonzero global_seqno. Afterwards we assert that we
remove them in order, i.e. the global_seqno matches the engine's seqno,
but that leaves a small loophole for an unattached request on an unused
engine.
We can then make the same assertion on queuing the request to the
execution engine, it must have a zero global_seqno or else we are queuing
the same request twice.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222141959.3006-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Fri, 22 Dec 2017 13:27:42 +0000 (13:27 +0000)]
drm/i915/execlists: Show preemption progress in GEM_TRACE
We already emit a GEM_TRACE for when we start preemption, but we lack
one to show when the preemption is completed and we return to the regular
queue. This is to continue the investigation into the mysterious
<0>[ 197.854177] <idle>-0 1..s1 197837017us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0], tail=0 [0]
<0>[ 197.854209] drv_self-6008 2.... 197837390us : reset_common_ring: rcs0 seqno=15515
<0>[ 197.854240] drv_self-6008 2.... 197837415us : reset_common_ring: bcs0 seqno=0
<0>[ 197.854270] drv_self-6008 2.... 197837443us : reset_common_ring: vcs0 seqno=0
<0>[ 197.854300] drv_self-6008 2.... 197837463us : reset_common_ring: vcs1 seqno=0
<0>[ 197.854330] drv_self-6008 2.... 197837482us : reset_common_ring: vecs0 seqno=0
<0>[ 197.854360] ksoftirq-23 2..s. 197838341us : execlists_submission_tasklet: bcs0 in[0]: ctx=0.1, seqno=1dce7
<0>[ 197.854392] <idle>-0 1..s1 197838347us : execlists_submission_tasklet: bcs0 cs-irq head=0 [0], tail=0 [0]
<0>[ 197.854423] ksoftirq-23 2..s. 197838354us : execlists_submission_tasklet: vcs0 in[0]: ctx=0.1, seqno=1d027
<0>[ 197.854456] ksoftirq-23 2.Ns. 197838361us : execlists_submission_tasklet: vcs1 in[0]: ctx=0.1, seqno=1e738
<0>[ 197.854488] ksoftirq-23 2.Ns. 197838366us : execlists_submission_tasklet: vecs0 in[0]: ctx=0.1, seqno=235aa
<0>[ 197.854520] ksoftirq-23 2.Ns. 197838376us : execlists_submission_tasklet: rcs0 in[0]: ctx=0.1, seqno=15518
<0>[ 197.854552] <idle>-0 1..s1 197853285us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0], tail=7 [7]
<0>[ 197.854584] <idle>-0 1..s1 197853285us : execlists_submission_tasklet: rcs0 csb[1]: status=0x00000018:0x00000000
<0>[ 197.854616] <idle>-0 1..s1 197853286us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.0, seqno=0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222132742.4272-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Rodrigo Vivi [Fri, 22 Dec 2017 18:13:23 +0000 (10:13 -0800)]
Merge tag 'gvt-next-2017-12-22' of https://github.com/intel/gvt-linux into drm-intel-next-queued
gvt-next-2017-12-22:
- more mmio switch optimization (Weinan)
- cleanup i915_reg_t vs. offset usage (Zhenyu)
- move write protect handler out of mmio handler (Zhenyu)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222085141.vgewlvvni37dljdt@zhen-hp.sh.intel.com
Ville Syrjälä [Mon, 13 Nov 2017 13:36:22 +0000 (15:36 +0200)]
drm/i915: Put all non-blocking modesets onto an ordered wq
We have plenty of global registers and whatnot programmed without
any further locking by the modeset code. Currently non-bocking
modesets are allowed to execute in parallel which could corrupt
said registers.
To avoid the problem let's run all non-blocking modesets on an
ordered workqueue. We still put page flips etc. to system_unbound_wq
allowing page flips on one pipe to execute in parallel with page flips
or a modeset on a another pipe (assuming no known state is shared
between them, at which point they would have been added to the same
atomic commit and serialized that way).
Blocking modesets are already serialized with each other by
connection_mutex, and thus are safe. To serialize them with
non-blocking modesets we just flush the workqueue before executing
blocking modesets.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 94f050246b42 ("drm/i915: nonblocking commit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113133622.8593-1-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Ville Syrjälä [Thu, 21 Dec 2017 20:24:32 +0000 (22:24 +0200)]
drm/i915: Disable GMBUS clock gating around GMBUS transfers on gen9+
Gen9+ need to disable GMBUS clock gating when doing multi part
transfers. Otherwise clock gating will kick in when GMBUS is in
the WAIT state and presumably that will corrupt the transfer.
This is documented as Display WA #0868.
Apparently older hardware doesn't allow clock gating in the WAIT
state and thus are unaffected by this problem.
v2: Limit the PCH w/a to gen9 and gen10 only (DK)
Actually change it to check the PCH type instead since
it's the PCH that actually contains the GMBUS hardware
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171221202432.17373-1-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 8 Dec 2017 21:37:38 +0000 (23:37 +0200)]
drm/i915: Clean up the PNV bit banging vs. GMBUS clock gating w/a
Give a proper name for the GMBUS clock gating disable bit on PNV,
and rename intel_i2c_quirk_set() to pnv_gmbus_clock_gating() for
clarity.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Fri, 8 Dec 2017 21:37:37 +0000 (23:37 +0200)]
drm/i915: No need to power up PG2 for GMBUS on BXT
GMBUS lives in PG1, so no need to power up PG2. We do want to prevent
the DMC from making a mess of things though, so add GMBUS to the DC off
power well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-2-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Ville Syrjälä [Fri, 8 Dec 2017 21:37:36 +0000 (23:37 +0200)]
drm/i915: Disable DC states around GMBUS on GLK
Prevent the DMC from destroying GMBUS transfers on GLK. GMBUS
lives in PG1 so DC off is all we need.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
projects / openwrt / staging / blogic.git / log