net: gianfar: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fec: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dpaa: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters
(other than adaptive rx, which will now be rejected by core).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: be2net: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: ethtool: Refactor to remove fallthrough comments in case blocks

Converting fallthrough comments to fallthrough; creates warnings
in this code when compiled with gcc.

This code is overly complicated and reads rather better with a
little refactoring and no fallthrough uses at all.

Remove the fallthrough comments and simplify the written source
code while reducing the object code size.

Consolidate duplicated switch/case blocks for IPV4 and IPV6.

defconfig x86-64 with sfc:

$ size drivers/net/ethernet/sfc/ethtool.o*
   text    data     bss     dec     hex filename
  10055      12       0   10067    2753 drivers/net/ethernet/sfc/ethtool.o.new
  10135      12       0   10147    27a3 drivers/net/ethernet/sfc/ethtool.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: sched: make newly activated qdiscs visible"

This reverts commit 4cda75275f9f89f9485b0ca4d6950c95258a9bce
from net-next.

Brown bag time.

Michal noticed that this change doesn't work at all when
netif_set_real_num_tx_queues() gets called prior to an initial
dev_activate(), as for instance igb does.

Doing so dies with:

[   40.579142] BUG: kernel NULL pointer dereference, address: 0000000000000400
[   40.586922] #PF: supervisor read access in kernel mode
[   40.592668] #PF: error_code(0x0000) - not-present page
[   40.598405] PGD 0 P4D 0
[   40.601234] Oops: 0000 [#1] PREEMPT SMP PTI
[   40.605909] CPU: 18 PID: 1681 Comm: wickedd Tainted: G            E     5.6.0-rc3-ethnl.50-default #1
[   40.616205] Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.R3.27.D685.1305151734 05/15/2013
[   40.627377] RIP: 0010:qdisc_hash_add.part.22+0x2e/0x90
[   40.633115] Code: 00 55 53 89 f5 48 89 fb e8 2f 9b fb ff 85 c0 74 44 48 8b 43 40 48 8b 08 69 43 38 47 86 c8 61 c1 e8 1c 48 83 e8 80 48 8d 14 c1 <48> 8b 04 c1 48 8d 4b 28 48 89 53 30 48 89 43 28 48 85 c0 48 89 0a
[   40.654080] RSP: 0018:ffffb879864934d8 EFLAGS: 00010203
[   40.659914] RAX: 0000000000000080 RBX: ffffffffb8328d80 RCX: 0000000000000000
[   40.667882] RDX: 0000000000000400 RSI: 0000000000000000 RDI: ffffffffb831faa0
[   40.675849] RBP: 0000000000000000 R08: ffffa0752c8b9088 R09: ffffa0752c8b9208
[   40.683816] R10: 0000000000000006 R11: 0000000000000000 R12: ffffa0752d734000
[   40.691783] R13: 0000000000000008 R14: 0000000000000000 R15: ffffa07113c18000
[   40.699750] FS:  00007f94548e5880(0000) GS:ffffa0752e980000(0000) knlGS:0000000000000000
[   40.708782] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   40.715189] CR2: 0000000000000400 CR3: 000000082b6ae006 CR4: 00000000001606e0
[   40.723156] Call Trace:
[   40.725888]  dev_qdisc_set_real_num_tx_queues+0x61/0x90
[   40.731725]  netif_set_real_num_tx_queues+0x94/0x1d0
[   40.737286]  __igb_open+0x19a/0x5d0 [igb]
[   40.741767]  __dev_open+0xbb/0x150
[   40.745567]  __dev_change_flags+0x157/0x1a0
[   40.750240]  dev_change_flags+0x23/0x60

[...]

Fixes: 4cda75275f9f ("net: sched: make newly activated qdiscs visible")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
CC: Michal Kubecek <mkubecek@suse.cz>
CC: Eric Dumazet <edumazet@google.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: soc: qcom: fix IPA binding

The definitions for the "qcom,smem-states" and "qcom,smem-state-names"
properties need to list their "$ref" under an "allOf" keyword.

In addition, fix two problems in the example at the end:
  - Use #include for header files that define needed symbolic values
  - Terminate the line that includes the "ipa-shared" register space
    name with a comma rather than a semicolon

Finally, update some white space in the example for better alignment.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mptcp: don't hang before sending 'MP capable with data'

the following packetdrill script

  socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3
  fcntl(3, F_GETFL) = 0x2 (flags O_RDWR)
  fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
  connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
  > S 0:0(0) <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8,mpcapable v1 flags[flag_h] nokey>
  < S. 0:0(0) ack 1 win 65535 <mss 1460,sackOK,TS val 700 ecr 100,nop,wscale 8,mpcapable v1 flags[flag_h] key[skey=2]>
  > . 1:1(0) ack 1 win 256 <nop, nop, TS val 100 ecr 700,mpcapable v1 flags[flag_h] key[ckey,skey]>
  getsockopt(3, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
  fcntl(3, F_SETFL, O_RDWR) = 0
  write(3, ..., 1000) = 1000

doesn't transmit 1KB data packet after a successful three-way-handshake,
using mp_capable with data as required by protocol v1, and write() hangs
forever:

 PID: 973    TASK: ffff97dd399cae80  CPU: 1   COMMAND: "packetdrill"
  #0 [ffffa9b94062fb78] __schedule at ffffffff9c90a000
  #1 [ffffa9b94062fc08] schedule at ffffffff9c90a4a0
  #2 [ffffa9b94062fc18] schedule_timeout at ffffffff9c90e00d
  #3 [ffffa9b94062fc90] wait_woken at ffffffff9c120184
  #4 [ffffa9b94062fcb0] sk_stream_wait_connect at ffffffff9c75b064
  #5 [ffffa9b94062fd20] mptcp_sendmsg at ffffffff9c8e801c
  #6 [ffffa9b94062fdc0] sock_sendmsg at ffffffff9c747324
  #7 [ffffa9b94062fdd8] sock_write_iter at ffffffff9c7473c7
  #8 [ffffa9b94062fe48] new_sync_write at ffffffff9c302976
  #9 [ffffa9b94062fed0] vfs_write at ffffffff9c305685
 #10 [ffffa9b94062ff00] ksys_write at ffffffff9c305985
 #11 [ffffa9b94062ff38] do_syscall_64 at ffffffff9c004475
 #12 [ffffa9b94062ff50] entry_SYSCALL_64_after_hwframe at ffffffff9ca0008c
     RIP: 00007f959407eaf7  RSP: 00007ffe9e95a910  RFLAGS: 00000293
     RAX: ffffffffffffffda  RBX: 0000000000000008  RCX: 00007f959407eaf7
     RDX: 00000000000003e8  RSI: 0000000001785fe0  RDI: 0000000000000008
     RBP: 0000000001785fe0   R8: 0000000000000000   R9: 0000000000000003
     R10: 0000000000000007  R11: 0000000000000293  R12: 00000000000003e8
     R13: 00007ffe9e95ae30  R14: 0000000000000000  R15: 0000000000000000
     ORIG_RAX: 0000000000000001  CS: 0033  SS: 002b

Fix it ensuring that socket state is TCP_ESTABLISHED on reception of the
third ack.

Fixes: 1954b86016cf ("mptcp: Check connection state before attempting send")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

soc: qcom: ipa: fix spelling mistake "cahces" -> "caches"

There is a spelling mistake in a dev_err message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ibm: remove set but not used variables 'err'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/ibm/emac/core.c: In function __emac_mdio_write:
drivers/net/ethernet/ibm/emac/core.c:875:9: warning:
variable err set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Add missing annotation for *netlink_seq_start()

Sparse reports a warning at netlink_seq_start()

warning: context imbalance in netlink_seq_start() - wrong count at exit
The root cause is the missing annotation at netlink_seq_start()
Add the missing  __acquires(RCU) annotation

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: Add missing annotation for tcp_child_process()

Sparse reports warning at tcp_child_process()
warning: context imbalance in tcp_child_process() - unexpected unlock
The root cause is the missing annotation at tcp_child_process()

Add the missing __releases(&((child)->sk_lock.slock)) annotation

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

raw: Add missing annotations to raw_seq_start() and raw_seq_stop()

Sparse reports warnings at raw_seq_start() and raw_seq_stop()

warning: context imbalance in raw_seq_start() - wrong count at exit
warning: context imbalance in raw_seq_stop() - unexpected unlock

The root cause is the missing annotations at raw_seq_start()
and raw_seq_stop()
Add the missing __acquires(&h->lock) annotation
Add the missing __releases(&h->lock) annotation

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: make newly activated qdiscs visible

In their .attach callback, mq[prio] only add the qdiscs of the currently
active TX queues to the device's qdisc hash list.
If a user later increases the number of active TX queues, their qdiscs
are not visible via eg. 'tc qdisc show'.

Add a hook to netif_set_real_num_tx_queues() that walks all active
TX queues and adds those which are missing to the hash list.

CC: Eric Dumazet <edumazet@google.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: slcan, slip -- no need for goto when if () will do

No need to play with gotos to jump over single statement.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: selftests: Fix L3/L4 Filtering test

Since commit 319a1d19471e, stmmac only support basic HW stats type for
action. Set this field in the L3/L4 Filtering test so that it correctly
setups the filter instead of returning EOPNOTSUPP.

Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cdc_ncm: Implement the 32-bit version of NCM Transfer Block

The NCM specification defines two formats of transfer blocks: with 16-bit
fields (NTB-16) and with 32-bit fields (NTB-32). Currently only NTB-16 is
implemented.

This patch adds the support of NTB-32. The motivation behind this is that
some devices such as E5785 or E5885 from the current generation of Huawei
LTE routers do not support NTB-16. The previous generations of Huawei
devices are also use NTB-32 by default.

Also this patch enables NTB-32 by default for Huawei devices.

During the 2019 ValdikSS made five attempts to contact Huawei to add the
NTB-16 support to their router firmware, but they were unsuccessful.

Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

bareudp: Fixed bareudp receive handling

Reverted commit "2baecda bareudp: remove unnecessary udp_encap_enable() in
bareudp_socket_create()"

An explicit call to udp_encap_enable is needed as the setup_udp_tunnel_sock
does not call udp_encap_enable if the if the socket is of type v6.

Bareudp device uses v6 socket to receive v4 & v6 traffic

CC: Taehee Yoo <ap420073@gmail.com>
Fixes: 2baecda37f4e ("bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()")
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ftgmac100: Remove redundant judgement

In this function, ftgmac100_probe() can be triggered only
if the platform_device and platform_driver matches, so the
judgement at the beginning is redundant.

Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ethtool-consolidate-irq-coalescing-part-3'

Jakub Kicinski says:

====================
ethtool: consolidate irq coalescing - part 3

Convert more drivers following the groundwork laid in a recent
patch set [1] and continued in [2]. The aim of the effort is to
consolidate irq coalescing parameter validation in the core.

This set converts 15 drivers in drivers/net/ethernet.
3 more conversion sets to come.

None of the drivers here checked all unsupported parameters.

[1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/
[2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: gemini: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cxgb4vf: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cxgb4: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cxgb3: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cxgb2: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mlx4: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: liquidio: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bna: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: tg3: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmgenet: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject all unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bnx2x: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bnx2: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: systemport: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver did not previously reject most of unsupported
parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: reject all unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

This driver only rejected some of the unsupported parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Sameeh Jubran <sameehj@amazon.com>
Acked-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: simplify getting stats by using netdev_stats_to_stats64

Let netdev_stats_to_stats64() do the copy work for us.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: let rtl8169_mark_to_asic clear rx descriptor field opts2

Clearing opts2 belongs to preparing the descriptor for DMA engine use.
Therefore move it into rtl8169_mark_to_asic().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2020-03-10

This series contains updates to ice and iavf drivers.

Cleaned up unnecessary parenthesis, which was pointed out by Sergei
Shtylyov.

Mitch updates the iavf and ice drivers to expand the limitation on the
number of queues that the driver can support to account for the newer
800-series capabilities.

Brett cleans up the error messages for both SR-IOV and non SR-IOV use
cases.  Fixed the logic when the ice driver is removed and a bare-metal
VF is passing traffic, which was causing a transmit hang on the VF.
Updated the ice driver to display "Link detected" field via ethtool,
when the driver is in safe mode.  Updated ice driver to properly set
VLAN pruning when transmit anti-spoof is off.

Avinash fixed a corner case in DCB, when switching from IEEE to CEE
mode, the DCBX mode does not get properly updated.

Dave updates the logic when switching from software DCB to firmware DCB
to renegotiate DCBX to ensure the firmware agent has up to date
information about the DCB settings of the link partner.

Lukasz increases the PF's mailbox receive queue size to the maximum to
prevent potential bottleneck or slow down occurring from the PF's
mailbox receive queue being full.

Bruce updates the ice driver to use strscpy() instead of strlcpy().
Cleaned up variable names that were not very descriptive with names that
had more meaning.

Anirudh replaces the use of ENOTSUPP with EOPNOTSUPP in the ice driver.

Jake fixed up a function header comment to properly reflect the variable
size and use.

v2: Dropped patch 5 of the original series, where Tony added tunnel
    offload support.  Based on community feedback, the patch needed
    changes, so giving Tony additional time to work on those changes and
    not hold up the remaining changes in the series.
====================

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mt7530: fix macro MIRROR_PORT

The inner pair of parentheses should be around the variable x

Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: use delayed_work instead of timer + work

Simplify ksz_common.c by using delayed_work instead of a combination of
timer and work.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'flow_offload-follow-ups-to-HW-stats-type-patchset'

Jiri Pirko says:

====================
flow_offload: follow-ups to HW stats type patchset

This patchset includes couple of patches in reaction to the discussions
to the original HW stats patchset. The first patch is a fix,
the other two patches are basically cosmetics.
====================

Acked-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

flow_offload: restrict driver to pass one allowed bit to flow_action_hw_stats_types_check()

The intention of this helper was to allow driver to specify one type
that it supports, so not only "any" value would pass. So make the API
more strict and allow driver to pass only 1 bit that is going
to be checked.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

flow_offload: turn hw_stats_type into dedicated enum

Put the values into enum and add an enum to define the bits.

Suggested-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

flow_offload: fix allowed types check

Change the check to see if the passed allowed type bit is enabled.

Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'enetc-Support-extended-BD-rings-at-runtime'

Claudiu Manoil says:

====================
enetc: Support extended BD rings at runtime

First two patches are just misc code cleanup.
The 3rd patch prepares the Rx BD processing code to be extended
to processing both normal and extended BDs.
The last one adds extended Rx BD support for timestamping
without the need of a static config. Finally, the config option
FSL_ENETC_HW_TIMESTAMPING can be dropped.
Care was taken not to impact non-timestamping usecases.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Add dynamic allocation of extended Rx BD rings

Hardware timestamping support (PTP) on Rx requires extended
buffer descriptors, double the size of normal Rx descriptors.
On the current controller revision only the timestamping offload
requires extended Rx descriptors.
Since Rx timestamping can be turned on/off at runtime, make Rx ring
allocation configurable at runtime too. As a result, the static
config option FSL_ENETC_HW_TIMESTAMPING can be dropped and the
extended descriptors can be used only when Rx timestamping gets
activated.
The extension has the same size as the base descriptor, making
the descriptor iterators easy to update for the extended case.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Clean up Rx BD iteration

Improve maintainability of the code iterating the Rx buffer
descriptors to prepare it to support iterating extended Rx BD
descriptors as well.
Don't increment by one the h/w descriptor pointers explicitly,
provide an iterator that takes care of the h/w details.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Clean up of ehtool stats len

Refactor the stats len computation code to make it easier
to add new stats counters.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Drop redundant device node check

The existence of the DT port node is the first thing checked
at probe time, and probing won't reach this point if the node
is missing.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pktgen: Allow on loopback device

When pktgen is used to measure the performance of dev_queue_xmit()
packet handling in the core, it is preferable to not hand down
packets to a low-level Ethernet driver as it would distort the
measurements.

Allow using pktgen on the loopback device, thus constraining
measurements to core code.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

flow_offload: use flow_action_for_each in flow_action_mixed_hw_stats_types_check()

Instead of manually iterating over entries, use flow_action_for_each
helper. Move the helper and wrap it to fit to 80 cols on the way.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ice: fix incorrect size description of ice_get_nvm_version

The function comment for ice_get_nvm_version indicated that the ver_hi
and ver_lo values were 16 bits. In fact, they are only uint8_t values,
meaning that they have a maximum size of 8 bits. Fix the comment to
match the correct size.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: use variable name more descriptive than type

The variable name 'type' is not very descriptive. Replace instances of
those with a variable name that is more descriptive or replace it if not
needed.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Use EOPNOTSUPP instead of ENOTSUPP

Using ENOTSUPP almost always results in some bizarre error message to
be printed in userspace. This is likely because ENOTSUPP was defined for
the NFS protocol (as per a comment in include/linux/errno.h). Use
EOPNOTSUPP instead.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Fix format specifier

Commit ed5a3f664c55 ("ice: Removing hung_queue variable to use txqueue
function parameter") began utilizing the txqueue variable over the
hung_queue variable. hung_queue was an int where txqueue is an unsigned
int. Update the format specifiers to reflect the new type.

Fixes: ed5a3f664c55 ("ice: Removing hung_queue variable to use txqueue function parameter")
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: fix use of deprecated strlcpy()

checkpatch complains "CHECK:DEPRECATED_API: Deprecated use of 'strlcpy',
prefer 'stracpy or strscpy' instead"; use strscpy.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Increase mailbox receive queue length to maximum

Currently the PF's mailbox receive queue is only 512 entries. This fine,
but considering that all VF's mailbox send queues funnel into the PF's
single mailbox receive queue, let's increase it to the maximum size. This
will help prevent any possible bottleneck/slowdown occurring from the PF's
mailbox receive queue being full.

Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Correct setting VLAN pruning

VLAN pruning is not always being set correctly due to a previous change
that set Tx antispoof off. ice_vsi_is_vlan_pruning_ena() currently checks
for both Tx antispoof and Rx pruning. The expectation for this function is
to only check Rx pruning so fix the check.

Fixes: cd6d6b83316a ("ice: Fix VF spoofchk")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: renegotiate link after FW DCB on

When switching from SW DCB to FW DCB it is necessary
to renegotiate DCBx so that the FW agent can have up
to date information about the DCB settings of the link
partner.

Perform an autoneg restart on the link when activating
FW DCB.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Fix corner case when switching from IEEE to CEE

While testing DCB for a corner case in which mode is switched from IEEE to
CEE and pfc_ena bitmask unchanged then DCBX mode doesn't get updated.

This is happening because the function ice_dcb_get_mode() is called
in a "no change detected block" instead of "change detected block".

Signed-off-by: Avinash JD <avinash.dayanand@intel.com>
Signed-off-by: Scott Register <scottx.register@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Display Link detected via Ethtool in safe mode

Currently the "Link detected" field is not shown when the device goes
into safe mode. This is because the safe mode Ethtool ops does not set the
get_link function. Fix this by setting the safe mode Ethtool op get_link
function.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Fix removing driver while bare-metal VFs pass traffic

Currently, if there are bare-metal VFs passing traffic and the ice
driver is removed, there is a possibility of VFs triggering a Tx timeout
right before iavf_remove(). This is causing iavf_close() to not be
called because there is a check in the beginning of iavf_remove() that
bails out early if (adapter->state < IAVF_DOWN_PENDING). This makes it
so some resources do not get cleaned up. Specifically, free_irq()
is never called for data interrupts, which results in the following line
of code to trigger:

pci_disable_msix()
free_msi_irqs()
...
BUG_ON(irq_has_action(entry->irq + i));
...

To prevent the Tx timeout from occurring on the VF during driver unload
for ice and the iavf there are a few changes that are needed.

[1] Don't disable all active VF Tx/Rx queues prior to calling
pci_disable_sriov.

[2] Call ice_free_vfs() before disabling the service task.

[3] Disable VF resets when the ice driver is being unloaded by setting
the pf->state flag __ICE_VF_RESETS_DISABLED.

Changing [1] and [2] allow each VF driver's remove flow to successfully
send VIRTCHNL requests, which includes queue disable. This prevents
unexpected Tx timeouts because the PF driver is no longer forcefully
disabling queues.

Due to [1] and [2] there is a possibility that the PF driver will get a
VFLR or reset request over VIRTCHNL from a VF during PF driver unload.
Prevent that by doing [3].

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Improve clarity of prints and variables

Currently when the device runs out of MSI-X interrupts a cryptic and
unhelpful message is printed. This will cause confusion when hitting this
case. Fix this by clearing up the error message for both SR-IOV and non
SR-IOV use cases.

Also, make a few minor changes to increase clarity of variables.
1. Change per VF MSI-X and queue pair variables in the PF structure.
2. Use ICE_NONQ_VECS_VF when determining pf->num_msix_per_vf instead of
the magic number "1". This vector is reserved for the OICR.

All of the resource tracking functions were moved to avoid adding
any forward declaration function prototypes.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: allow bigger VFs

Unlike the XL710 series, 800-series hardware can allocate more than 4
MSI-X vectors per VF. This patch enables that functionality. We
dynamically allocate vectors and queues depending on how many VFs are
enabled. Allocating the maximum number of VFs replicates XL710
behavior with 4 queues and 4 vectors. But allocating a smaller number
of VFs will give you 16 queues and 16 vectors.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

iavf: Enable support for up to 16 queues

Previous devices could only allocate 4 MSI-X vectors per VF so there was a
limitation of 4 queues. 800-series hardware can allocate more than 4 MSI-X
vectors, so expand the limitation on the number of queues that the driver
can support to account for these capabilities.

Fix ethtool channel operations to accommodate this change and adjust the
reporting of max number of queues to what is given to us by the PF. Since
we're not requesting queues above this value, just trigger reset to
activate the queues, which we already own.

Finally, fix a test condition that would display an incorrect error
message.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Cleanup unneeded parenthesis

Sergei Shtylyov pointed out that two instances of parenthesis are not
needed, so remove them.

Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

Merge branch 'net-Add-support-for-Synopsys-DesignWare-XPCS'

Jose Abreu says:

====================
net: Add support for Synopsys DesignWare XPCS

This adds support for Synopsys DesignWare XPCS in net subsystem and
integrates it into stmmac.

At 1/8, we start by removing the limitation of stmmac selftests that needed
a PHY to pass all the tests.

Then at 2/8 we use some helpers in stmmac so that some code can be
simplified.

At 3/8, we fallback to dev_fwnode() so that PCI based setups wich may
not have CONFIG_OF can still use FW node.

At 4/8, we adapt stmmac to the new PHYLINK changes as suggested by Russell
King.

We proceed by doing changes in PHYLINK in order to support XPCS: At 5/8 we
add some missing speeds that USXGMII supports and at 6/8 we check if
Autoneg is supported after initial parameters are validated.

Support for XPCS is finally introduced at 7/8, along with the usage of it
in stmmac driver at 8/8.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Integrate it with DesignWare XPCS

Adds all the necessary logic so that stmmac can be used with Synopsys
DesignWare XPCS.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: Add Synopsys DesignWare XPCS MDIO module

Synopsys DesignWare XPCS is an MMD that can manage link status,
auto-negotiation, link training, ...

In this commit we add basic support for XPCS using USXGMII interface and
Clause 73 Auto-negotiation.

This is highly tied with PHYLINK and can't be used without it. A given
ethernet driver can use the provided callbacks to add the support for
XPCS.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phylink: Test if MAC/PCS support Autoneg

We may have cases where MAC or PCS do not support Autoneg. Check if it
is supported after validate callback is called.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phylink: Add missing Backplane speeds

USXGMII also supports these missing backplane speeds.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Use resolved link config in mac_link_up()

Convert the stmmac ethernet driver to use the finalised link parameters
in mac_link_up() rather than the parameters in mac_config().

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fallback to dev_fwnode() if needed

When CONFIG_OF is not enabled, of_fwnode_handle() will return NULL, even
though we can have a FW handle from a given device.

Fallback to dev_fwnode() helper if needed.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Switch to linkmode_and()/linkmode_andnot()

Use the linkmode_and()/linkmode_andnot() helpers to simplify the code.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: selftests: Do not fail if PHY is not attached

If a PHY is not attached, we can still run the tests with MAC loopback
mode. Return -EOPNOTSUPP error code in PHY loopback test so that global
status is not a failure.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-updates-2020-03-09' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2020-03-09

This series provides updates to mlx5 driver:

1) Use vport metadata matching only when mandatory
2) Introduce root flow table and ethtool steering for uplink representors
3) Expose port speed via FW when link modes are not available
3) Misc cleanups
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hns3-next'

Huazhong Tan says:

====================
net: hns3: misc updates for -net-next

This series includes some misc updates for the HNS3 ethernet driver.

[patch 1] fixes some mixed type operation warning.
[patch 2] renames a macro to make it more readable.
[patch 3 & 4]  removes some unnecessary code.
[patch 5] adds check before assert VF reset to prevent some unsuitable
error log.
[patch 6 - 9] some modifications related to printing.

Change log:
V1->V2: fixes a wrong print format in [patch 1] suggested by Jian Shen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: delete unnecessary logs after kzalloc fails

Since kernel already has logs after kzalloc fails,
it's unnecessary to print duplicate logs. So this
patch deletes these logs.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: synchronize some print relating to reset issue

This patch modifies some printing relating to reset issue.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: print out command code when dump fails in debugfs

This patch adds a local variable to save the command code in
some dump cases which need to modify the command code, then
the failing command code can be print out for debugging.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: print out status register when VF receives unknown source interrupt

When received an unknown vector 0 interrupt, there is not a
helpful information for user to realize that now. So this patch
prints out the value of the status register for this case, and
uses dev_info() instead of dev_dbg() in hclge_check_event_cause().

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: add a check before PF inform VF to reset

When setting VF's MAC from PF, if the VF driver not loaded, the
firmware will return error to PF.

So PF should check whether VF is alive before sending message to
VF when setting VF's MAC.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: delete some reduandant code

In hclge_add_mc_addr_common() and hclge_rm_mc_addr_common(),
variable req had been set as "0" by memset(), so it's unnecessary
to set .entry_type field as "0" with hnae3_set_bit() again.

Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: remove an unnecessary resetting check in hclge_handle_hw_ras_error()

In hclge_handle_hw_ras_error(), it is unnecessary to check
HCLGE_STATE_RST_HANDLING flag, because the reset priority
has been ensured by the process itself.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: rename macro HCLGE_MAX_NCL_CONFIG_LENGTH

The name of macro HCLGE_MAX_NCL_CONFIG_LENGTH is inaccurate,
this patch renames it to HCLGE_NCL_CONFIG_LENGTH_IN_EACH_CMD.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix some mixed type assignment

This patch cleans up some incorrect type in assignment reported by sparse
and compiler.
The warning as below:
- warning : restricted __le16 degrades to integer
- warning : cast from restricted __le32
- warning : cast from restricted __be32
- warning : cast from restricted __be16
and "mixed operation".

Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ionic-updates'

Shannon Nelson says:

====================
ionic updates

This is a set of small updates for the Pensando ionic driver, some
from internal work, some a result of mailing list discussions.

v4 - don't register mgmt device netdev
v3 - changed __attribute__(packed)) to __packed
v2 - removed print from ionic_init_module()
====================

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: drop ethtool driver version

Use the default kernel version in ethtool drv_info output
and drop the module version.

Cc: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: add support for device id 0x1004

Add support for the management port device id.  This is to
capture the device and set it up for devlink use, but not set
it up for network operations.  We still use a netdev object
in order to use the napi infrasucture for processing adminq
and notifyq messages, we just don't register the netdev.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: print pci bus lane info

Print the PCI bus lane information so people can keep an
eye out for poor configurations that might not support
the advertised speed.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: support ethtool rxhash disable

We can disable rxhashing by setting rss_types to 0.  The user
can toggle this with "ethtool -K <ethX> rxhash off|on",
which calls into the .ndo_set_features callback with the
NETIF_F_RXHASH feature bit set or cleared.  This patch adds
a check for that bit and updates the FW if necessary.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: clean up bitflag usage

Remove the unused flags field and and fix the bitflag names
to include the _F_ flag hint.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: improve irq numa locality

Spreading the interrupts across the CPU cores is good for load
balancing, but not necessarily as good when using a CPU/core
that is not part of the NUMA local CPU.  If it can be localized,
the kernel's cpumask_local_spread() service will pick a core
that is on the node close to the PCI device.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: remove pragma packed

Replace the misguided "#pragma packed" with tags on each
struct/union definition that actually needs it.  This is safer
and more efficient on the various compilers and architectures.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: keep ionic dev on lif init fail

If the basic ionic interface works but the lif creation fails,
don't fail the probe.  This will allow us to use the driver to
help inspect the hw/fw/pci interface for debugging purposes.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mptcp-don-t-auto-adjust-rcvbuf-size-if-locked'

Florian Westphal says:

====================
mptcp: don't auto-adjust rcvbuf size if locked

The mptcp receive buffer is auto-sized based on the subflow receive
buffer.  Don't do this if userspace specfied a value via SO_RCVBUF
setsockopt.

Also update selftest program to provide a new option to set a fixed
size.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: don't grow mptcp socket receive buffer when rcvbuf is locked

The mptcp rcvbuf size is adjusted according to the subflow rcvbuf size.
This should not be done if userspace did set a fixed value.

Fixes: 600911ff5f72bae ("mptcp: add rmem queue accounting")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: selftests: add rcvbuf set option

allows to run the tests with fixed receive buffer by passing
"-R <value>" to mptcp_connect.sh.

While at it, add a default 10 second poll timeout so the "-t"
becomes optional -- this makes mptcp_connect simpler to use
during manual testing.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mt7530: add support for port mirroring

Add support for configuring port mirroring through the cls_matchall
classifier. We do a full ingress and/or egress capture towards a
capture port.
MT7530 supports one monitor port and multiple mirrored ports.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'batadv-next-for-davem-20200306' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
This cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - Avoid RCU list-traversal in spinlock, by Sven Eckelmann

 - Replace zero-length array with flexible-array member,
   by Gustavo A. R. Silva
====================

Signed-off-by: David S. Miller <davem@davemloft.net>