staging: tidspbridge: use scm functions to set boot address and mode

Instead of ioremapping SCM registers, use the correspondent layer
to write into them.

This allows us to get rid of a layer violation, since the registers
are no longer touched by driver code.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: fix uninitialized variable sym_name

On both counts, sym_name could be printed uninitialized, this
is solved by moving the pr_* statement to be triggered if the
value is assigned.

Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: fix memory corruption on long string names

The value allocated doesn't match the one that is meant to be
stored, resulting in corruption of memory for longer strings
that can't be held in such space.

Fix by allocating the correct byte value for the string meant to
be stored.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: fix potential array out of bounds write

The name of the firmware (drv_datap->base_img) could potentially
become equal to 255 valid characters (size of exec_file), this
will result in an out of bounds write, given that the 255 chars
along with a '\0' terminator will be copied into an array of
255 chars.

Produce an error on this cases, because the driver expects the NULL
ending to be among the 255 char limit.

Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: usbip: usbipcommon: Fixed single line bracing issue

Fixed coding style issue with single line braces.

Signed-off-by: Jake Champlin <jake.champlin.27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sb105x: clean up interface type test

IIR_RS232 is zero so "if (IIR_RS232 == (b_ret & IIR_RS232))" is always
true so RS232 was always chosen by default.  The test should be
"if (0 == (b_ret & 0x30)) { ".  The other tests should also be in that
format.

This does change how the code works...  If 0x30 is set then it now
defaults to RS232 instead of RS485.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sb105x: move dereference under IS_ERR() check

Avoid dereverencing the ERR_PTR() by shifting the dereference down a
couple lines.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Fix space-related checkpatch.pl warnings

This fixes all instances of
"Please, no spaces at start of a new line"
"Please, no spaces before tabs"

Please note that I probably got the warning names wrong,
but they should be close enough for usage here :)

Additional post-commit note: There is one comment on line 230ish in slic.h
that appears to have lost it's formatting. It was fine when I was working
in Geany, but it caught my eye in the below diff. Sorry if it actually happened!

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Fix three checkpatch.pl errors in slicoss.c

The errors fixed are all instances of
"ERROR: do not use assignment in if condition"

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Stop swearing in slicoss.c

I'm assuming that "CRC shit reg" is referencing the CRC register/registry.
Please ignore this patch if "shit" is actually in context

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: add a missing break statement

This is a static checker fix.  From the context it looks like there
should be a break here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Only configure regs if link state changes

Some config regs get set whenever adjust_link() is called. Change this
so that these registers only get set when the link state changes to UP.

Also remove unnecessary second assignment of boot_coma.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ipu-di: Change DI address info to dev_dbg

Currently when ipuv3 is probed we have:

imx-ipuv3 40000000.ipu: DI0 base: 0x5e040000 remapped to a08aa000
imx-ipuv3 40000000.ipu: DI1 base: 0x5e048000 remapped to a08ac000
imx-ipuv3 40000000.ipu: IPUv3EX probed

The DI base address and the remapped address are more interesting for debug
purposes, so mark this message as dev_dbg instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: copying more data than intended

This was changed to bcm_flash2x_cs_info instead of bcm_flash_cs_info
when we got rid of the typedefs.  bcm_flash2x_cs_info is quite a bit
larger than bcm_flash_cs_info (436 bytes instead of 96) so it would
corrupt user memory and it's an info leak.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: kobjects.c: checkpatch.pl fixes

Fixed two "line over 80 characters" warnings reported by checkpatch.pl

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: keyhelp.c: checkpatch.pl fixes

Breaking 2 lines to fit 80 char limit

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: buffers.c: checkpatch.pl fixes

Fixed two camel case issues.

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omapdrm/omap_gem_dmabuf.c: fix memory leakage

There is a memory leakage in variable sg if it goes to error.

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: ipu-common: Remove unused variable

Fix the following warning when building with W=1 option:

drivers/staging/imx-drm/ipu-v3/ipu-common.c: In function 'ipu_remove':
drivers/staging/imx-drm/ipu-v3/ipu-common.c:1145:19: warning: variable 'res' set but not used [-Wunused-but-set-variable]

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Add OMAP5 support

Add support for OMAP5 processor.  The main differences are that the OMAP5
has 2 containers, one for 1D and one for 2D.  Each container is 128MiB in
size.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Add PM capabilities

Added power management capabilities into the omapdrm and DMM drivers.
During suspend, we don't need to do anything to maintain the state of
the LUT.  We have all the necessary information to recreate the mappings
of the GEM object list maintained by the omapdrm driver.

On resume, the DMM resume handler will first reprogram the LUT to point
to the dummy page.  The subsequent resume handler in the omapdrm will call
into the DMM and reprogram each of the buffer objects.  This will ensure
that all of the necessary objects will be pinned into the DMM properly.

Order of suspend/resume handlers is done by device creation.  We create
the DMM device before the omapdrm, so the correct order is maintained.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: no braces needed for single statement if , for blocks

there is only one line inside the if and for blocks, so the braces are
not needed

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: s/kmalloc + memset / kzalloc

replace kmalloc and subsequent memset with kzalloc
and drop the null checks and casts and clean the coding style a bit too

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: checkpatch fixes

put opening brace in a new line
4 ---> 8 spaces

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: s/kmalloc + memset/kzalloc in alloc_rd_info

replace kmalloc and memset if the pointer is valid with kzalloc,
and remove the check around the null pointer cases as we dont need it.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: comment zs_create_pool function

Just as with zs_malloc() and zs_map_object(), it is worth
formally commenting the zs_create_pool() function.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: zcache: delete it

Dan Magenheimer says that it is now safe to delete zcache, so quick,
before he changes his mind, drop the thing on the floor and run
screaming away.

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: drop zram_stat_dec/inc functions

It seems like an overkill to have adding and subtracting
1 functions from the 32bit counters. Just do it directly.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: show correct disksize

The ->disksize variable stores values in units of bytes,
print the correct size in Kb

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: simplify num_devices paramater

Simplify dealing with num_devices when initializing zram.
Also cleanup some of the output messages.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: fix GFP_KERNEL in spinlock context

Allowi() calls usb_submit_urb(pdx->pUrbCharIn, bInCallback ? GFP_ATOMIC : GFP_KERNEL)
under spin_lock_irqsave(&pdx->charInLock, flags). That means it should use GFP_ATOMIC anyway.
As soon as it is the only usage of bInCallback argument, the patch removes it at all.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: add a missing break statement

My static checker complains that there is a missing break statement
here.  From the context, it does look like a break statement was
intended.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: avoid CamelCase POD_* enums in pod.c

Fix the following checkpatch.pl warnings:

  WARNING: Avoid CamelCase: <POD_monitor_level>
  #4512: FILE: staging/line6/pod.c:41:
  +       POD_monitor_level  = 0x04,

  WARNING: Avoid CamelCase: <POD_system_invalid>
  #4513: FILE: staging/line6/pod.c:42:
  +       POD_system_invalid = 0x10000

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: rename MidiBuffer to avoid CamelCase

Fix checkpatch.pl warnings related to MidiBuffer:

  WARNING: Avoid CamelCase: <MidiBuffer>
  #947: FILE: staging/line6/driver.c:363:
  +       struct MidiBuffer *mb = &line6->line6midi->midibuf_in;

Rename MidiBuffer to midi_buffer.

Note that "midibuf" would be another good name but sound/oss/midibuf.c
already uses it for a different concept.  Avoid possible confusion by
using "midi_buffer" instead.

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: use pr_err() instead of printk(KERN_ERR, ...)

Fix the following checkpatch.pl warning:

  WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
  #1861: FILE: staging/line6/driver.h:56:
  +       printk(KERN_ERR "line6usb driver bug: missing case in %s:%d\n", \

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: wrap comment to 80 chars in driver.c

Fix the following checkpatch.pl warning:

  WARNING: line over 80 characters
  #1107: FILE: staging/line6/driver.c:523:
  +       /* Wait for data length. We'll get a couple of 0xff until length arrives. */

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: wrap lines to 80 chars in pod.c

Fix the following checkpatch.pl warnings:

  WARNING: line over 80 characters
  #4508: FILE: staging/line6/pod.c:37:
  +       /* POD_SYSEX_DUMPMEM2  = 0x76 */   /* dumps entire internal memory of PODxt Pro */

  WARNING: line over 80 characters
  #4630: FILE: staging/line6/pod.c:159:
  +               if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) == 0) {

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: drop ToneportSourceInfo CamelCase name

Fix the following checkpatch.pl warning:

  WARNING: Avoid CamelCase: <ToneportSourceInfo>
  #5383: FILE: staging/line6/toneport.c:90:
  +struct ToneportSourceInfo {

Since the struct is only used to define the global
toneport_source_info[] table, I have chosen to make the struct
anonymous and part of the table definition.

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: remove unused definitions from ethernet.h

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: remove all NDIS_* definitions and use rndis.h instead

Remove duplicate code.The definitions are already in
include/linux/rndis.h

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: remove unused macros

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: replace min with min_t

I've changed the ugly casting here and used min_t() instead.  I
also changed the u16 to a u32 because ->network.Ssid.SsidLength
is 32 bits.  It doesn't make a difference, but truncating the
upper bits away is sloppy.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: replace printk with better solutions

Replace printk with netdev_printk helpers, dev_printk helpers or
pr_err/warn/info if there is no device info available.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: remove unused macros from rtl8712/wifi.h

Those definitions are not used anywhere in the kernel. If you know any
reason why they should stay in the code please speak up!

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: code clean up

Clean some trivial formating problems in rtl8712 from staging tree. This patch
also changes the way preprocessor macros are defined to keep checkpatch.pl
quiet.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fixed coding style issues in r8192U_core.c

This patch fixes some coding style issuses in r8192U_core.c
No logic is changed

Signed-off-by: Patrik Kårlin <patrik.karlin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: removed some non used else's

This patch removes some else blocks that has no function in the
code

Signed-off-by: Patrik Kårlin <patrik.karlin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fixed some coding style issues in r8192U_core.c

This patch fixes some coding style issues. in r8192U_core.c
No logic is changed.

Signed-off-by: Patrik Kårlin <patrik.karlin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: remove useless calls to memset().

These calls are followed by calls to memcpy() on the same memory area, so they
can be safely removed.

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'staging-linus' into staging-next

This is to get the comedi fixes, and resolve the issue in comdi_test.c
and comedi_fops.c that were caused by changes in both branches.

It also allows the fwserial driver changes to be applied, as they
required the fixes that are in staging-linus.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: use prepare/unprepare on dsp clocks

This solves runtime failures while trying to enable WDT3 related
functionality on firmware load, however it does affect other clocks
controlled by the driver. Seen on 3.8-rc1.

CCF provides clk_prepare and clk_unprepare for enable and disable
operations respectively, this needs to be called in the correct
order while handling clocks.

Code path to enable/disable dsp clocks can still be reached from an
atomic context, hence we can't use clk_prepare_enable and
clk_disable_unprepare yet.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: Fix build breakage due to splitting CM functions.

Commit ff4ae5d (ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files)
resulted in a build breakage for tidspbridge driver.

   ...
   CC [M]  drivers/staging/tidspbridge/core/tiomap3430.o
   staging/tidspbridge/core/tiomap3430.c: In function ‘bridge_brd_start’:
   staging/tidspbridge/core/tiomap3430.c:550:24: error: ‘OMAP3430_CM_AUTOIDLE_PLL’
     undeclared (first use in this function)
   make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1
   ...

Fix this by including the appropriate header file.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Add some Kconfig help entries

This commit adds Kconfig entries for the following:

1: ANDROID_BINDER_IPC
2: ASHMEM (additional text)
3: ANDROID_LOGGER

It also changes "Register" to "Registers" in
ANDROID_LOW_MEMORY_KILLER

Finally, all "help" instances are changed to "---help---",
as recommended by kconfig-language.txt in order to visually
aid developers.

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Fix two checkpatch issues in binder.c

This fixes two instances of
"static const char * array should probably be static const char * const"

I have seen other commits doing this in other files, so I am
assuming it should be done here as well.

Please tell me if this is wrong :)

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Avoid using camelcase in binder.h

This changes the following:

1: BinderDriverReturnProtocol -> binder_driver_return_protocol
2: BinderDriverCommandProtocol -> binder_driver_return_protocol

These enums are not currently used, but still generate noise in checkpatch.

Well, did. They don't now :)

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: Fix dereference before check

Smatch complains about some pointers that are dereferenced before being
checked:

drivers/staging/csr/sme_sys.c:285
CsrWifiRouterCtrlHipReqHandler() warn: variable dereferenced before
check 'priv' (see line 283)
drivers/staging/csr/sme_sys.c:1503
CsrWifiRouterMaPacketReqHandler() warn: variable dereferenced before
check 'priv' (see line 1501)
drivers/staging/csr/sme_sys.c:2062
CsrWifiRouterCtrlPeerDelReqHandler() warn: variable dereferenced before
check 'priv' (see line 2059)
drivers/staging/csr/sme_sys.c:2477
CsrWifiRouterCtrlPeerAddReqHandler() warn: variable dereferenced before
check 'priv' (see line 2474)
drivers/staging/csr/sme_sys.c:3045
CsrWifiRouterCtrlWapiRxPktReqHandler() warn: variable dereferenced
before check 'priv' (see line 3039)

We put the check before the dereferencing and prevent an oops and fix
the warning.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Add angle bracket before and after the URL

Add missing angle bracket before and after the URL.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vme: Fix URL in Kconfig

The URL vmelinux.org is not accessible.
Change it to www.vmelinux.org.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: avoid a useless call to memset().

In r8711_wx_get_wap(), make sure we do not call memcpy() on a memory area that
has just been zeroed by a call to memset().

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: fix error check in omap_thermal_expose_sensor() and in omap_thermal_register_cpu_cooling().

The omap_bandgap_get_sensor_data() function returns ERR_PTR(), so we need to use
IS_ERR() rather than a NULL check.

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Makefile: conditionally compile multi-file core module

Instead of using the #ifdef'ery in the comedi_compat32.c and proc.c
files to include/exclude them from the comedi core, modify the Makefile
to include those files automatically when enabled in the .config.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: fix race when cancelling command

Éric Piel reported a kernel oops in the "comedi_test" module.  It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).

This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command.  In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.

Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC

The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the
'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config
needs to also select 'COMEDI_FC'.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org> # 3.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: addi_common.c: checkpatch.pl fixes

checkpatch.pl style fixes:
- Broken license text into 80 char lines
- fixed two space before tab issues
- Removed unnecessary braces from if-else

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: whitespace fixes

Fix lines over 80 characters and line up nearby comments.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: tidy up waveform_ai_interrupt()

Use a local variable to reduce the indentation in
`waveform_ai_interrupt()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: make samples unsigned

Represent the fake samples as unsigned shorts instead of signed shorts,
as this is the usual Comedi convention.  There is no change to the
actual binary representation, although the `cfc_write_to_buffer()` call
currently expects a signed short for some bizarre reason.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: change end-of-acquisition test

In the "comedi_test" module's acquisition timer function
`waveform_ai_interrupt()`, move the code for ending the acquisition
outside the scan loop.  Determine if the number of scans to be done is
sufficient to end the acquisition before entering the scan loop.  On
leaving the scan loop, set the `COMEDI_CB_EOA` event if the acquisition
is ending.  Only reschedule the timer if the acquisition is not ending.

Remove the somewhat useless `timer_running` flag from the private data.
This was intended to stop the timer function adding the timer back on
the timer queue periodically, but the flag setting wasn't synchronized
with the timer and we already use `del_timer_sync()` to synchronize
removal from the queue.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: remove unnecessary del_timer() call

In the "comedi_test" module, the timer function
`waveform_ai_interrupt()` doesn't need to remove the timer from the
timer queue as the caller has already removed it from the queue.  Remove
the call to `del_timer()` in this function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: fix race when cancelling command

Éric Piel reported a kernel oops in the "comedi_test" module.  It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).

This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command.  In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.

Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: comedidev.h: fixed a camel case

Fixed a camel case issue.

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: store the 'index' for each subdevice

Store the 'index' for each comedi_subdevice when they are initially
allocated by comedi_alloc_subdevice(). This allows removing the
pointer math in comedi_fops.c which is used to figure out the
index that user space uses to access the individual subdevices.

Fix the ni_mio_common driver so it also uses the 'index' instead
of doing the pointer math.

Also, remove a couple unused macros in the pcmda12, pcmmio, and
pcmuio drivers which also do the pointer math to figure out the
index.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: use kzalloc in comedi_alloc_subdevice_minor()

The hardware_device member of comedi_file_info is not set in this
function. Use kzalloc to make sure this pointer does not contain
invalid data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: cleanup comedi_mmap()

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Change the (foo == NULL) tests to simply (!foo).

Use a local variable to hold a pointer to the async->buf_page_list[]
when doing the remap_pfn_range(). This cleans up the ugly line breaks
for the page_to_pfn(virt_to_page(...) operation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: cleanup comedi_{read, write}_subdevice()

Flip the info->device tests so than the return NULL occurs last.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: introduce comedi_is_subdevice_idle()

Introduce, and use, a helper to check the subdevice runflags to see if
it is not in error and not running.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: introduce comedi_is_subdevice_in_error()

Introduce, and use, a helper to check the subdevice runflags to see if
the SRF_ERROR flag is set.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: don't export comedi_get_subdevice_runflags()

The subdevice runflags are protected with a spin_lock. Only the comedi
core should be accessing them directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use comedi_is_subdevice_running()

Use the helper function comedi_is_subdevice_running() instead of getting
the subdevice runflags and then masking the result.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: introduce comedi_is_subdevice_running()

Introduce a helper function that checks the subdevice runflags to
see if the subdevice is running a command.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: move comedi_get_subdevice_runflags()

For aesthetic reasons, move this function so its near
comedi_set_subdevice_runflags().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: fix a number of sizeof(struct foo) forms

As mentioned in CodingStyle, the prefered form is:

p = kmalloc(sizeof(*p), ...);

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: move comedi_cleanup_legacy_minors()

This function is only called by the module_{init,exit} functions. For
aesthetic reasons, move it near them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: move the module_{init, exit} functions to EOF

For aesthetic reasons, move the module_{init,exit} functions to the end
of the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: move the MODULE_* information to EOF

For aesthetic reasons, move the MODULE_* information to the end of
the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: remove the goto's in comedi_write()

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Cleanup the sanity checking a bit and remove the need for the goto's
when returning an initial error condition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: remove the goto's in comedi_read()

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Cleanup the sanity checking a bit and remove the need for the goto's
when returning an initial error condition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: cleanup comedi_poll()

Consolidate the local variables 'read_subdev' and 'write_subdev' into a
single local variable 's'.

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Use a goto in the !dev->attached test so that the mutex_unlock() call
is in a common place.

Cleanup the formating of the || in the read and write subdevice poll
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: cleanup do_devinfo_ioctl()

Consolidate the local variables 'read_subdev' and 'write_subdev' into a
single local variable 's'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: rename comedi_{read,write}_subdevice()

The 'get' usually implies increasing a reference count of an object.
These function return a pointer but do not do any reference counting.
For aesthetic reasons, rename the functions to better represent what
they do.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: rename comedi_get_device_file_info()

The 'get' usually implies increasing a reference count of an object.
This function returns a pointer but does not do any reference counting.
For aesthetic reasons, rename the function to better represent what
its doing.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: rename struct comedi_device_file_info

For aesthetic reasons, rename this struct to comedi_file_info. It's
a bit shorter and allows fixing some of the ugly line breaks used
to keep the lines < 80 chars.

Also, consistently use the local variable name 'info' instead of the
longer 'dev_file_info' to also fix some ugly line breaks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't expose struct comedi_device_file_info

This structure is only used in comedi_fops.c as part of handling
the file operations and sysfs files. Remove it's defenition from
comedidev.h so it's not exposed to the comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: don't export comedi_get_device_file_info()

This function is now only used in comedi_fops.c and does not need
to be exported.

Make it static and move it to avoid forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use comedi_dev_from_minor()

Remove the need to export comedi_get_device_file_info() by using the
new helper comedi_dev_from_minor(). This will also allow us to make
the comedi_device_file_info struct private.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: introduce comedi_dev_from_minor()

A number of functions have to call comedi_get_device_file_info()
to get the comedi_device_file_info pointer for a given minor. That
pointer is only used to get the actual comedi_device pointer for
the minor.

Introduce a new helper function, comedi_dev_from_minor(), to simplify
this operation. This will also allow us to make the comedi_device_file_info
struct private.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't expose comedi_get_{read, write}_subdevice

These two inline helper function in comedidev.h are only used in
comedi_fops.c. They return information that should only be used
by the comedi core.

Move both functions to comedi_fops.c so they aren't exposed to
the comedi drivers. Also, remove the inline tag and let the
compiler figure it out.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: remove forward declarations

Move a couple of the functions to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: prevent auto-unconfig of manually configured devices

When a low-level comedi driver auto-configures a device, a `struct
comedi_dev_file_info` is allocated (as well as a `struct
comedi_device`) by `comedi_alloc_board_minor()`.  A pointer to the
hardware `struct device` is stored as a cookie in the `struct
comedi_dev_file_info`.  When the low-level comedi driver
auto-unconfigures the device, `comedi_auto_unconfig()` uses the cookie
to find the `struct comedi_dev_file_info` so it can detach the comedi
device from the driver, clean it up and free it.

A problem arises if the user manually unconfigures and reconfigures the
comedi device using the `COMEDI_DEVCONFIG` ioctl so that is no longer
associated with the original hardware device.  The problem is that the
cookie is not cleared, so that a call to `comedi_auto_unconfig()` from
the low-level driver will still find it, detach it, clean it up and free
it.

Stop this problem occurring by always clearing the `hardware_device`
cookie in the `struct comedi_dev_file_info` whenever the
`COMEDI_DEVCONFIG` ioctl call is successful.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix minimum AO period for NI 625x and NI 628x

The minimum period was set to 357 ns, while the divider for these boards is 50
ns. This prevented to output at maximum speed as ni_ao_cmdtest() would return
357 but would not accept it.

Not sure why it was set to 357 ns (this was done before the git history,
which starts 5 years ago). My guess is that it comes from reading the
specification stating a 2.8 MHz rate (~ 357 ns). The latest
specification states a 2.86 MHz rate (~ 350 ns), which makes a lot
more sense.

Tested on a pci-6251.

Signed-off-by: Éric Piel <piel@delmic.com>
Acked-By: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>