Felix Fietkau [Mon, 2 Dec 2013 16:41:03 +0000 (16:41 +0000)]
netifd: add wireless configuration support and port mac80211 to the new framework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38988
Felix Fietkau [Mon, 2 Dec 2013 13:08:17 +0000 (13:08 +0000)]
uci: update to the latest version, adds a small uci_to_blob fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38987
Felix Fietkau [Mon, 2 Dec 2013 13:08:14 +0000 (13:08 +0000)]
hostapd: change the wildcard for the hostapd control socket directory
prepare for using /var/run/hostapd instead of /var/run/hostapd-phy*
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38986
Felix Fietkau [Mon, 2 Dec 2013 13:08:11 +0000 (13:08 +0000)]
wpa_supplicant: clean up hostapd control socket on exit to fix socket leak in ap+sta mode on wifi restarts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38985
Felix Fietkau [Mon, 2 Dec 2013 13:08:08 +0000 (13:08 +0000)]
hostapd: fix os_daemonize vs starting process race by creating the pid file in the parent
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38984
Felix Fietkau [Mon, 2 Dec 2013 13:08:03 +0000 (13:08 +0000)]
libubox: update to latest version, adds some more jshn performance improvements and fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38983
Felix Fietkau [Mon, 2 Dec 2013 13:08:00 +0000 (13:08 +0000)]
netifd: remove redundant calls to /sbin/wifi down
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38982
Felix Fietkau [Mon, 2 Dec 2013 13:07:46 +0000 (13:07 +0000)]
hostapd: always include p2p options in wpa_cli
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38981
Hauke Mehrtens [Sun, 1 Dec 2013 18:12:57 +0000 (18:12 +0000)]
brcm47xx: misc cleanups
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38980
Hauke Mehrtens [Sun, 1 Dec 2013 18:05:08 +0000 (18:05 +0000)]
brcm47xx: deactivate mips wait instruction only for BCM4706
The wait instruction is only broken on the BCM4706 and not on the other
similar SoCs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38979
Hauke Mehrtens [Sun, 1 Dec 2013 17:34:27 +0000 (17:34 +0000)]
brcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSE
This sets both values to the OpenWrt default values. There is no reason
to use some brcm47xx specific values here.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38978
Hauke Mehrtens [Sun, 1 Dec 2013 17:23:19 +0000 (17:23 +0000)]
mac80211: b43: improve PCIe host controller workaround
This is only needed by BCM4716 and not by BCM4706, I haven't seen any
problems there. Adds the write flush for some more parts where the phy
control regs are written.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38977
Hauke Mehrtens [Sun, 1 Dec 2013 17:20:32 +0000 (17:20 +0000)]
mac80211: remove DMI_EXACT_MATCH
DMI_EXACT_MATCH was added to the kernel in version 3.10.21 and collides
with backports version. DMI_EXACT_MATCH is only used by the intel GPU
driver which is not build by OpenWrt, so remove it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38976
Hauke Mehrtens [Sun, 1 Dec 2013 16:37:58 +0000 (16:37 +0000)]
brcm47xx: add vectored interrupts
This adds support for vectored interrupts in this SoC.
This is supported by the 74K cpus.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38975
Hauke Mehrtens [Sun, 1 Dec 2013 16:36:38 +0000 (16:36 +0000)]
brcm47xx: add cpu overwrites
bcm47xx misses cpu overwrites for the features of the CPUs used in
these SoCs.
Instead of manually checking, it is now known at compile time for some
options and the compiler is able to remove the checks and optimize the
code.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38974
Hauke Mehrtens [Sun, 1 Dec 2013 16:32:32 +0000 (16:32 +0000)]
brcm47xx: use "firmware" partition name
Some time ago, after switching to the mainline bcm47xxpart driver
following patch has been applied:
commit
03cef8725d2062335ffc3de50fc037b294fd458c
Author: hauke <hauke@
3c298f89-4303-0410-b956-
a3cf2f4a3e73>
Date: Sat Apr 6 22:22:26 2013 +0000
brcm47xx: use old partition names again for kernel 3.8
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
I propose to revert this change and make sysupgrade use "firmware"
instead. This makes brcm47xx compatible with widely used ar71xx and
after all "firmware" sounds like a much better name for... the firmware.
This change doesn't affect "sysupgrade" usage, because it never takes a
partition name as a parameter. This change only affects users using mtd
tool directly. Hopefully there are not many howtos using "mtd" command.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 38973
Gabor Juhos [Sun, 1 Dec 2013 09:59:53 +0000 (09:59 +0000)]
kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38972
Luka Perkov [Sat, 30 Nov 2013 19:48:05 +0000 (19:48 +0000)]
ar71xx: merge board specific patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38971
Gabor Juhos [Sat, 30 Nov 2013 18:31:10 +0000 (18:31 +0000)]
kernel: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38970
Gabor Juhos [Sat, 30 Nov 2013 18:31:08 +0000 (18:31 +0000)]
ar71xx: update Userspace support for the WA850/WA750
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38969
Gabor Juhos [Sat, 30 Nov 2013 18:31:06 +0000 (18:31 +0000)]
ar71xx: Update profile for the wa750/wa850 to include rssileds by default
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38968
Gabor Juhos [Sat, 30 Nov 2013 18:31:04 +0000 (18:31 +0000)]
ar71xx: use cybertan_check_image for image verification on the WRT160NL
That function provides a slightly improved sanity check than the
currently used solution.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38967
Gabor Juhos [Sat, 30 Nov 2013 18:31:03 +0000 (18:31 +0000)]
ar71xx: sysupgrade for My Net Wi-Fi Range Extender
This patch enables the convenient sysupgrade feature for
WD's Wi-Fi Range Extender.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4341/
[juhosg:
- rename 'mynet_rext_check_image' function to 'cybertan_check_image'
and move that into platform.sh,
- remove the the model specific 'platform_do_upgrade_mynet_rext' function,
- drop the mynet-rext.sh script,
- remove the image/Makefile change,
- update commit message]
[christian:
- check all 8 bytes of the firmware/device magic]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38966
Gabor Juhos [Sat, 30 Nov 2013 18:31:01 +0000 (18:31 +0000)]
ar71xx: image: unify CyberTAN macros
Make the Image/Build/CyberTAN macro more generic,
and use simple wrappers for the GZIP/LZMA variants.
This simplifies the Makefile a bit, and allows to
build sysupgrade images for the devices which are
using LZMA compressed uImages.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38965
Gabor Juhos [Sat, 30 Nov 2013 18:30:59 +0000 (18:30 +0000)]
ar71xx: image: fix CyberTAN sysupgrade images
In the current sysupgrade images, the CRC32 value of
the TRX header covers the whole rootfs data. Due to
this, the CRC value should be changed during sysupgrade
otherwise the bootloader refuses to load the image on
the next boot.
Change the image generation to create sysupgrade images
where the CRC32 value covers the kernel data only. This
allows to skip the 'fixtrx' step during sysupgrade on
the target.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38964
Gabor Juhos [Sat, 30 Nov 2013 18:30:57 +0000 (18:30 +0000)]
firmware-utils/trx: remove trailing whitespaces
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38963
Gabor Juhos [Sat, 30 Nov 2013 18:30:56 +0000 (18:30 +0000)]
firmware-utils/trx: fix two bugs
- fix crc32 calculation if -F was enabled.
- don't convert the crc32 to little endian twice.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 38962
John Crispin [Sat, 30 Nov 2013 08:36:56 +0000 (08:36 +0000)]
ramips: Fix initial network configuration for few boards
Argus ATP52B: ethernet didn't work because of unconfigured switch
Sparklan WCR150GN: add switch config and make single port to be LAN
Dlink DIR-645: seems to be a redundant case
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 38960
John Crispin [Sat, 30 Nov 2013 08:36:47 +0000 (08:36 +0000)]
ramips: Fix dts typos
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 38959
Gabor Juhos [Fri, 29 Nov 2013 20:51:16 +0000 (20:51 +0000)]
ar71xx: build image for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38958
Gabor Juhos [Fri, 29 Nov 2013 20:51:15 +0000 (20:51 +0000)]
firmware-utils/mkplinkfw: add TL-WR1043ND v2 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38957
Gabor Juhos [Fri, 29 Nov 2013 20:51:13 +0000 (20:51 +0000)]
ar71xx: add user-space support for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38956
Gabor Juhos [Fri, 29 Nov 2013 20:51:12 +0000 (20:51 +0000)]
ar71xx: add kernel support for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38955
Gabor Juhos [Fri, 29 Nov 2013 20:18:50 +0000 (20:18 +0000)]
ar71xx: add profile and build image for the Sitecom WLR-8100
- partitions on factory fw are a bit strange
- unknown contained some strings in factory
- unknown2 contains some atheros (2nd art ?)
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4149/
[juhosg: edit commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38954
Gabor Juhos [Fri, 29 Nov 2013 20:18:49 +0000 (20:18 +0000)]
ar71xx: fix switch port map for the Sitecom WLR-8100
There was no way to determine a working config, because
the switch (ar8337) was not working previously.
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4470/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38953
Gabor Juhos [Fri, 29 Nov 2013 20:18:48 +0000 (20:18 +0000)]
generic: ar8216: add AR8337N switch support
This patch is needed to use the switch inside the Sitecom WLR-8100;
it was unusable and detected as Generic-Phy before.
since ar8337 is behaving like ar8327
generally do the same thing
see: https://forum.openwrt.org/viewtopic.php?pid=214218#p214218
forward-ported to trunk
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4469/
[juhosg: merge chip_is_ar83[23]7 statements in ar8xxx_phy_config_init]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38952
Gabor Juhos [Fri, 29 Nov 2013 20:18:46 +0000 (20:18 +0000)]
generic: ar8216: remove trailing whitespaces
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38951
Gabor Juhos [Fri, 29 Nov 2013 20:18:45 +0000 (20:18 +0000)]
ar71xx: rssi leds for My Net WiFi Range Extender
The device has three extra LEDs which indicate the quality
of the wireless link. Thanks to rssileds, this feature now
works out of the box.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4462/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38950
Gabor Juhos [Fri, 29 Nov 2013 20:18:44 +0000 (20:18 +0000)]
ar71xx: improve support for the My Net Wi-Fi Range Extender device
This patch improves support for the device considerably.
1. The wifi didn't work in the initial release. This was because
the WMAC of the AR9340 is not connected to the antennas.
(However, it can pick up wifi signals, if they are strong enough!)
Instead there's a dedicated AR9300 chip on the same board, which
works.
2. Ethernet throughput is improved. iperf shows that the hardware
can sustain more than 200Mbit/s and no longer drops any packages
when the link is under load.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4461/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38949
Gabor Juhos [Fri, 29 Nov 2013 20:18:43 +0000 (20:18 +0000)]
ag71xx: add F1E specific feature bit definitions to AR934X register file
The F1E Phy (AR8035?) requires additional bits to be
set in order to provide a fast and reliable connection
over gigabit links.
When enabled, the link doesn't suffer anymore from a small
package loss under load and the performance is improved
quite a bit as well. (203 mbit/s vs 112 mbit/s, iperf tcp).
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4460/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38948
Gabor Juhos [Fri, 29 Nov 2013 20:18:42 +0000 (20:18 +0000)]
ar71xx: user space support update tl-wr842n_v2 add default led support
Small update to uci_defaults/01_leds, to support the usb led
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38947
Gabor Juhos [Fri, 29 Nov 2013 20:18:40 +0000 (20:18 +0000)]
ar71xx: Kernel support update tl-wr842n_v2 added missing usb led
Just a small oversight my part, added the support for the USB led
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38946
Imre Kaloz [Fri, 29 Nov 2013 10:59:51 +0000 (10:59 +0000)]
FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38943
Imre Kaloz [Fri, 29 Nov 2013 10:58:40 +0000 (10:58 +0000)]
tunr on some additional features
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38942
Imre Kaloz [Fri, 29 Nov 2013 10:44:04 +0000 (10:44 +0000)]
ignore the fpu if we're doing soft-float
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38941
Imre Kaloz [Fri, 29 Nov 2013 10:25:43 +0000 (10:25 +0000)]
there's no such thing as a soft fpu, this target should be fine without these
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38940
Imre Kaloz [Fri, 29 Nov 2013 09:24:07 +0000 (09:24 +0000)]
enable using soft-float regardless of having a fpu
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38939
Jo-Philipp Wich [Thu, 28 Nov 2013 20:47:26 +0000 (20:47 +0000)]
ubox: fix handling of uci lists, prevent shell code injection from uci values (#14548)
SVN-Revision: 38938
Jo-Philipp Wich [Thu, 28 Nov 2013 11:33:49 +0000 (11:33 +0000)]
Revert "ubox: the validation code has problems with the "(" char. use string for now"
This reverts commit
f7c2ac3ea9b5f2dc4ef4ce4ef195de8a4ac5546b.
SVN-Revision: 38937
Jo-Philipp Wich [Thu, 28 Nov 2013 11:28:40 +0000 (11:28 +0000)]
busybox: do not abort sysntpd init if enable_server is unset, that variable just controls the server part for relaying NTP
SVN-Revision: 38936
Jo-Philipp Wich [Thu, 28 Nov 2013 11:26:34 +0000 (11:26 +0000)]
procd: fix processing of datatype specification with spaces
SVN-Revision: 38935
Imre Kaloz [Wed, 27 Nov 2013 12:51:35 +0000 (12:51 +0000)]
initialize wl12xx from the device tree
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38934
Imre Kaloz [Wed, 27 Nov 2013 12:40:07 +0000 (12:40 +0000)]
add device tree based initialization to wl12xx
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38933
Imre Kaloz [Wed, 27 Nov 2013 12:34:41 +0000 (12:34 +0000)]
refresh/rename patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38932
Imre Kaloz [Wed, 27 Nov 2013 12:33:06 +0000 (12:33 +0000)]
fix gpio interrupt-cells property on AM335x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38931
Imre Kaloz [Wed, 27 Nov 2013 12:31:05 +0000 (12:31 +0000)]
refresh patch
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38930
Imre Kaloz [Wed, 27 Nov 2013 12:29:13 +0000 (12:29 +0000)]
make the wl12xx glue code available with compat-wireless, too
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38929
Imre Kaloz [Wed, 27 Nov 2013 12:25:20 +0000 (12:25 +0000)]
add TI wireless symbols and enable the platform glue by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38928
Felix Fietkau [Wed, 27 Nov 2013 12:08:38 +0000 (12:08 +0000)]
mac80211: include 802.11n support when wl12xx is selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38927
Felix Fietkau [Wed, 27 Nov 2013 10:56:05 +0000 (10:56 +0000)]
ath9k: merge initval updates
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38926
Imre Kaloz [Wed, 27 Nov 2013 09:02:17 +0000 (09:02 +0000)]
fix typo in wl128x firmware names
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38925
Imre Kaloz [Tue, 26 Nov 2013 18:46:47 +0000 (18:46 +0000)]
hide package, it's needed all the time
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38924
Imre Kaloz [Tue, 26 Nov 2013 18:45:51 +0000 (18:45 +0000)]
use plain image names inside the target directories
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38923
Imre Kaloz [Tue, 26 Nov 2013 18:42:32 +0000 (18:42 +0000)]
upgrade Linaro GCC 4.8 to 4.8-2013.11
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38922
Imre Kaloz [Tue, 26 Nov 2013 17:46:45 +0000 (17:46 +0000)]
wl12xx could need the wl128x firmware files, too
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38921
Felix Fietkau [Tue, 26 Nov 2013 11:25:31 +0000 (11:25 +0000)]
mac80211: merge another round of upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38918
John Crispin [Tue, 26 Nov 2013 09:51:57 +0000 (09:51 +0000)]
ralink: dts fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38917
John Crispin [Tue, 26 Nov 2013 07:50:05 +0000 (07:50 +0000)]
ubox: the validation code has problems with the "(" char. use string for now
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38916
Felix Fietkau [Mon, 25 Nov 2013 15:43:30 +0000 (15:43 +0000)]
hostapd: add support for auto-channel selection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38915
Felix Fietkau [Mon, 25 Nov 2013 15:43:15 +0000 (15:43 +0000)]
hostapd: update to version 2013-11-20
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38914
John Crispin [Mon, 25 Nov 2013 14:09:48 +0000 (14:09 +0000)]
kernel/modules: snd-pcm-dmaengine only if CONFIG_SND_DMAENGINE_PCM is set
Platforms without in-soc audio don't provide CONFIG_SND_DMAENGINE_PCM, thus
the module is not generated.
SVN-Revision: 38913
John Crispin [Mon, 25 Nov 2013 14:09:24 +0000 (14:09 +0000)]
tools/mpfr: add GNU source
fixes https://dev.openwrt.org/ticket/14519
mpfr is available from GNU too
see: https://gforge.inria.fr/forum/forum.php?forum_id=11263
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 38912
John Crispin [Mon, 25 Nov 2013 14:09:16 +0000 (14:09 +0000)]
pppd: Place plugin-specific options after `plugin name`.
Before this patch, if we specify a plugin specific option through
`pppd_options` in /etc/config/network, e.g. `rp_pppoe_verbose 1`, pppd
would quit with the following error in log.
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): /usr/sbin/pppd: unrecognized option 'rp_pppoe_verbose'
Wed Oct 9 09:42:58 2013 daemon.err pppd[1689]: unrecognized option 'rp_pppoe_verbose'
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): pppd version 2.4.5
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): Usage: /usr/sbin/pppd [ options ], where options are:
This is due to the requirement that function add_option() should be
called by the plugin_init() function first before pppd can parse those
options.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 38911
John Crispin [Mon, 25 Nov 2013 14:09:08 +0000 (14:09 +0000)]
ralink: add mac address detection for Asus RT-G32 b1
http://patchwork.openwrt.org/patch/4463/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38910
John Crispin [Mon, 25 Nov 2013 08:34:55 +0000 (08:34 +0000)]
base-files: allow users to delect debug level during boot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38909
John Crispin [Mon, 25 Nov 2013 08:34:47 +0000 (08:34 +0000)]
procd: update procd.sh to make use of the new validate_data tool
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38908
John Crispin [Mon, 25 Nov 2013 08:34:39 +0000 (08:34 +0000)]
ubox: update the validate_data tool
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38907
John Crispin [Mon, 25 Nov 2013 08:34:31 +0000 (08:34 +0000)]
ubox: fix typo that caused log_file to not be validated properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38906
John Crispin [Mon, 25 Nov 2013 08:34:23 +0000 (08:34 +0000)]
ralink: fix up the mt7530 driver to work properly with gmac2
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38905
John Crispin [Mon, 25 Nov 2013 08:34:12 +0000 (08:34 +0000)]
ralink: add LRO support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38904
John Crispin [Mon, 25 Nov 2013 08:34:01 +0000 (08:34 +0000)]
ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X family
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38903
John Crispin [Mon, 25 Nov 2013 08:33:42 +0000 (08:33 +0000)]
ralink: set the mac addr via the dts file
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38902
Luka Perkov [Sun, 24 Nov 2013 23:07:34 +0000 (23:07 +0000)]
kirkwood: include ext4 support by default
Several users reported that they would like this feature.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38901
Luka Perkov [Sun, 24 Nov 2013 17:53:34 +0000 (17:53 +0000)]
kirkwood: kernel: add missing config option
Buildbot found missing config option for target kirkwood.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 38900
Luka Perkov [Sun, 24 Nov 2013 07:10:21 +0000 (07:10 +0000)]
cmake: upgrade to 2.8.12.1
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38899
Luka Perkov [Sat, 23 Nov 2013 15:55:12 +0000 (15:55 +0000)]
kirkwood: drop unnecessary argument from *_UBIFS_OPTS variables
The '-U' aka '--squash-uids' is already used in Image/mkfs/ubifs function.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38898
Luka Perkov [Sat, 23 Nov 2013 15:55:10 +0000 (15:55 +0000)]
kirkwood: add support for iomega iconnect
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Engberg <daniel.engberg@pyret.net>
SVN-Revision: 38897
Imre Kaloz [Fri, 22 Nov 2013 14:39:53 +0000 (14:39 +0000)]
For now vdi and vmdk images should be x86 only
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38896
Imre Kaloz [Fri, 22 Nov 2013 14:30:40 +0000 (14:30 +0000)]
move menuconfig options into separate files
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38895
Imre Kaloz [Fri, 22 Nov 2013 13:41:55 +0000 (13:41 +0000)]
drop stupid defaults
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38894
Imre Kaloz [Fri, 22 Nov 2013 12:01:01 +0000 (12:01 +0000)]
add a feature flag for device tree support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38893
Imre Kaloz [Fri, 22 Nov 2013 09:54:36 +0000 (09:54 +0000)]
VMWare and VirtualBox images should select what they need, not depend on it..
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38892
Imre Kaloz [Fri, 22 Nov 2013 09:44:14 +0000 (09:44 +0000)]
rationalize target image options
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38891
Imre Kaloz [Fri, 22 Nov 2013 09:39:41 +0000 (09:39 +0000)]
allow configuration of the target directory for binaries
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38890
Imre Kaloz [Fri, 22 Nov 2013 09:22:54 +0000 (09:22 +0000)]
replace the mips64 fixes patch with an upstream commit
The current one broke all other 64 bit targets.. DOH!
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38889
Felix Fietkau [Thu, 21 Nov 2013 21:52:24 +0000 (21:52 +0000)]
uhttpd: update to the latest version, fixes crashes in the ubus plugin
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38888
Luka Perkov [Wed, 20 Nov 2013 22:09:11 +0000 (22:09 +0000)]
pkg-config: fix occasional install problem
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38886
John Crispin [Wed, 20 Nov 2013 19:28:51 +0000 (19:28 +0000)]
procd: fix the running hook #38868
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38885
John Crispin [Wed, 20 Nov 2013 17:53:36 +0000 (17:53 +0000)]
lantiq: move patch to proper folder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38884
Felix Fietkau [Wed, 20 Nov 2013 17:33:50 +0000 (17:33 +0000)]
mac80211: fix reorder issues with multicast packets (client mode)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38883
projects / openwrt / staging / xback.git / log