[PATCH] x86_64: (resend) x86_64 stack overflow debugging

Take two, now without spurious whitespace :(  Applies to git & 2.6.17-rc6

CONFIG_DEBUG_STACKOVERFLOW existed for x86_64 in 2.4, but seems to have gone AWOL in 2.6.

I've pretty much just copied this over from the 2.4 code, with
appropriate tweaks for the 2.6 kernel, plus a bugfix.  I'd personally
rather see it printed out the way other arches do it, i.e.
bytes-remaining-until-overflow, rather than having to do the subtraction
yourself.  Also, only 128 bytes remaining seems awfully late to issue a
warning.  But I'll start here :)

Signed-off-by: Eric Sandeen <sandeen@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: msi_apic.c build fix

      CC      drivers/pci/msi-apic.o
In file included from include/asm/msi.h:11,
                  from drivers/pci/msi.h:71,
                  from drivers/pci/msi-apic.c:8:
include/asm/smp.h:103: error: syntax error before '->' token

akpm: nasty.  It appears to be

  static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)

conflicting with include/asm-x86_64/mach_apic.h's

  #define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)

And I don't know which patch in rc4-mm1 triggered this.

Fixing this in the .c file seems wrong.

Including asm/smp.h instead of linux/smp.h seems wrong too.  Need that
.config.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: i386/x86-64 Add nmi watchdog support for new Intel CPUs

Intel now has support for Architectural Performance Monitoring Counters
( Refer to IA-32 Intel Architecture Software Developer's Manual
http://www.intel.com/design/pentium4/manuals/253669.htm ). This
feature is present starting from Intel Core Duo and Intel Core Solo processors.

What this means is, the performance monitoring counters and some performance
monitoring events are now defined in an architectural way (using cpuid).
And there will be no need to check for family/model etc for these architectural
events.

Below is the patch to use this performance counters in nmi watchdog driver.
Patch handles both i386 and x86-64 kernels.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Avoid broadcasting NMI IPIs

On some i386/x86_64 systems, sending an NMI IPI as a broadcast will
reset the system.  This seems to be a BIOS bug which affects machines
where one or more cpus are not under OS control.  It occurs on HT
systems with a version of the OS that is not compiled without HT
support.  It also occurs when a system is booted with max_cpus=n where
2 <= n < cpus known to the BIOS.  The fix is to always send NMI IPI as
a mask instead of as a broadcast.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: fix apic error on bootup

Appended patch fixes the "APIC error on CPUX: 00(40)" observed during bootup.

From SDM Vol-3A "Valid Interrupt Vectors" section:
"When an illegal vector value (0-15) is written to an LVT entry
and the delivery mode is Fixed, the APIC may signal an illegal
vector error, with out regard to whether the mask bit is set
or whether an interrupt is actually seen on input."

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: enlarge window for stack growth

Allow stack growth so the 'enter' instruction works.  Also
fixes problem in compat_sys_kexec_load() which could allocate
more than 128 bytes using compat_alloc_user_space().

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Minor string functions optimizations

 - Use tail call from clear_user to __clear_user to save some code size
 - Use standard memcpy for forward memmove

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Move export symbols to their C functions

Only exports for assembler files are left in x8664_ksyms.c

Originally inspired by a patch from Al Viro
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Standardize i386/x86_64 handling of NMI_VECTOR

x86_64 and i386 behave inconsistently when sending an IPI on vector 2
(NMI_VECTOR).  Make both behave the same, so IPI 2 is sent as NMI.

The crash code was abusing send_IPI_allbutself() by passing a code
instead of a vector, it only worked because crash knew about the
internal code of send_IPI_allbutself().  Change crash to use NMI_VECTOR
instead, and remove the comment about how crash was abusing the function.

This patch is a pre-requisite for fixing the problem where sending an
IPI as NMI would reboot some Dell Xeon systems.  I cannot fix that
problem while crash continus to abuse send_IPI_allbutself().

It also removes the inconsistency between i386 and x86_64 for
NMI_VECTOR.  That will simplify all the RAS code that needs to bring
all the cpus to a clean stop, even when one or more cpus are spinning
disabled.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix modular pc speaker

It turned out that the following change is needed when the speaker is
compiled as a module.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: remove sys32_ni_syscall()

This patch removes the no longer used sys32_ni_syscall()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Do not use -ffunction-sections for modules

Currently CONFIG_REORDER uses -ffunction-sections for all code;
however, creating a separate section for each function is not useful
for modules and just adds bloat.  Moving this option from CFLAGS to
CFLAGS_KERNEL shrinks module object files (e.g., the module tree for a
kernel built with most drivers as modules shrinked from 54M to 46M),
and decreases the number of sysfs files in /sys/module/*/sections/
directories.

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Add cpu_relax to apic_wait_icr_idle

This one is adding a cpu_relax() that already existed in the i386 version.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: adjust kstack_depth_to_print default

Defaulting to a value not evenly divisible by four makes little sense,
as four values are displayed per line (and hence the rest of the line
would otherwise be wasted).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: adjust /proc/interrupts column headings

With (significantly) more than 10 CPUs online, the column headings
drifted off the positions of the column contents with growing CPU
numbers.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix race in cpu_local_* on preemptible kernels

When a process changes CPUs while doing the non atomic cpu_local_*
operations it might operate on the local_t of a different CPUs.

Fix that by disabling preemption.

Pointed out by Christopher Lameter

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix fast check in safe_smp_processor_id

The APIC ID returned by hard_smp_processor_id can be beyond
NR_CPUS and then overflow the x86_cpu_to_apic[] array.

Add a check for overflow. If it happens then the slow loop below
will catch.

Bug pointed out by Doug Thompson

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: x86_64 setup.c - printing cmp related boottime information

Getting phys_proc_id and cpu_core_id information to be printed at boot
time for AMD processors.  Also matching the Node related boot time
information that gets printed for Intel and AMD processors for NUMA
configurations.

Signed-off-by: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status

During some profiling I noticed that default_idle causes a lot of
memory traffic. I think that is caused by the atomic operations
to clear/set the polling flag in thread_info. There is actually
no reason to make this atomic - only the idle thread does it
to itself, other CPUs only read it. So I moved it into ti->status.

Converted i386/x86-64/ia64 for now because that was the easiest
way to fix ACPI which also manipulates these flags in its idle
function.

Cc: Nick Piggin <npiggin@novell.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove bogus RED-PEN comment in signal.c

No red zone possible/needed on the alternative stack.

It caused confusion.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: check_addr() cleanups

 - Use DMA_32BIT_MASK

 - Use %z for size_t

 - 80-cols

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: miscellaneous mm/init.c fixes

 - fix an off-by-one error in phys_pmd_init()
 - prevent phys_pmd_init() from removing mappings established earlier
 - fix the direct mapping early printk to in fact show the end of the range
 - remove an apparently orphan comment

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Mark mce_amd cpu notifier __cpuinit/__cpuinitdata

Cc: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: mce_amd cleanup

Clean up mce_amd.c for readability and remove code no
longer needed.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: mce_amd support for family 0x10 processors

Add support for mce threshold registers found in future
AMD family 0x10 processors.  Backwards compatible with
family 0xF hardware.

AK: fixed build on !SMP

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: mce_amd relocate sysfs files

Get rid of /sys/devices/system/threshold directory and move
mce_amd thresholding files into the machine sysfs directory --
/sys/devices/system/machinecheck.

AK: Fixed warning

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: apic support for extended apic interrupt

Add support for extended APIC LVT found in future AMD processors.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Move VM86 config into arch/i386/Kconfig

Architecture specific configs like this have no business at all
in init/Kconfig. This prevents it from being set on x86-64

Pointed out by H.Peter Anvin

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: Fix isoimage when syslinux is in /usr/share

It's like this on SUSE systems.

Cc: hpa@zytor.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Update copyright in time.c

Update my copyright dates in arch/x86-64/kernel/time.c

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Explain why HPET T0_CMP register is written twice

After writing the CFG register, the first value written to the T0_CMP
register is the value at which next interrupt should be triggered, every
value after that sets the period of the interrupt. For that reason, the code
needs to write the value twice - to set both the phase and period.

[AK: I had already figured it out by myself, but it's still useful
to have a comment for this.]

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Make use of the *PER* constants in time.c

This patch makes use of the newly added conversion constants
in time.h to x86-64 time.c. The code gets significantly easier
to understand.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove hack to manually enable HPET on AMD8111 southbridges

Remove #ifdefed code to manually enable HPET on AMD8111, where the
BIOS doesn't have ACPI HPET tables and doesn't enable it for us.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Add X86_FEATURE_RDTSCP, fix rdtscp in /proc/cpuinfo

This patch adds the X86_FEATURE_RDTSCP #define, so that kernel code can
check for the feature easily and also fixes the location of the "rdtscp"
string in the cpuinfo tables.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Rename oem_force_hpet_timer to apic_is_clustered_box

Rename oem_force_hpet_timer to apic_is_clustered_box, to give the
function a better fitting name - it really isn't at all about HPET.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Add useful constants to time.h

In timekeeping code, one often does need to use conversion constants. Naming
these leads to code that's easier to understand, showing the reader between
which units the conversion is made.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: moving phys_proc_id and cpu_core_id to cpuinfo_x86

Most of the fields of cpuinfo are defined in cpuinfo_x86 structure.
This patch moves the phys_proc_id and cpu_core_id for each processor to
cpuinfo_x86 structure as well.

Signed-off-by: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Calgary IOMMU - Calgary specific bits

This patch hooks Calgary into the build, the x86-64 IOMMU
initialization paths, and introduces the Calgary specific bits.  The
implementation draws inspiration from both PPC (which has support for
the same chip but requires firmware support which we don't have on
x86-64) and gart. Calgary is different from gart in that it support a
translation table per PHB, as opposed to the single gart aperture.

Changes from previous version:
 * Addition of boot-time disablement for bus-level translation/isolation
   (e.g, enable userspace DMA for things like X)
 * Usage of newer IOMMU abstraction functions

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Calgary IOMMU - IOMMU abstractions

This patch creates a new interface for IOMMUs by adding a centralized
location for IOMMU allocation (for translation tables/apertures) and
IOMMU initialization.  In creating these, code was moved around for
abstraction, uniformity, and consiceness.

Take note of the move of the iommu_setup bootarg parsing code to
__setup.  This is enabled by moving back the location of the aperture
allocation/detection to mem init (which while ugly, was already the
location of the swiotlb_init).

While a slight departure from the previous patch, I belive this provides
the true intention of the previous versions of the patch which changed
this code.  It also makes the addition of the upcoming calgary code much
cleaner than previous patches.

[AK: Removed one broken change. iommu_setup still has to be called
early]

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Calgary IOMMU - move valid_dma_direction into the callers

Based on Andi Kleen's comments on the original Calgary patch, move
valid_dma_direction into the calling functions.

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Calgary IOMMU - introduce iommu_detected

swiotlb relies on the gart specific iommu_aperture variable to know if
we discovered a hardware IOMMU before swiotlb initialization.  Introduce
iommu_detected to do the same thing, but in a HW IOMMU neutral manner,
in preparation for adding the Calgary HW IOMMU.

Signed-Off-By: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-Off-By: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Change assembly to use regular cpuid_count macro

Minor cleanup patch:

Replacing the asm statement with cpuid_count macro(which already
provides the same functionality).

Signed-off-by: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: use halt() instead of raw inline assembly

Use abstractions whenever possible.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Get rid of pud_offset_k / __pud_offset_k

pud_offset_k() equivalent to pud_offset() now.  Pointed out by Jan Beulich
Similar for __pud_offset_ok, which needs a small change in the callers.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: Consolidate arch/{i386,x86_64}/boot/compressed/misc.c

Clean up arch/{i386,x86_64}/boot/compressed/misc.c a bit to reduce their
differences. Should have zero effect on code generation.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: allow unwinder to build without module support

Add proper conditionals to be able to build with CONFIG_MODULES=n.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: fall back to old-style call trace if no unwinding

If no unwinding is possible at all for a certain exception instance,
fall back to the old style call trace instead of not showing any trace
at all.

Also, allow setting the stack trace mode at the command line.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386: reliable stack trace support i386 entry.S

To increase the usefulness of reliable stack unwinding, this adds CFI
unwind annotations to many low-level i386 routines.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386: reliable stack trace support (i386)

These are the i386-specific pieces to enable reliable stack traces. This is
going to be even more useful once CFI annotations get added to he assembly
code, namely to entry.S.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: reliable stack trace support (x86-64 syscall

Adjust the CFA offset for 64- and 32-bit syscall entries so that the five
slots pre-subtracted from the stack pointer do not appear to reside outside
of the current frame.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: reliable stack trace support (x86-64 IRQ stack

Change the switching to/from the IRQ stack so that unwind annotations can
be added for it without requiring CFA expressions.

AK: I cleaned it up a bit, making it unconditional and removing the
obsolete DEBUG_INFO full frame code.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: reliable stack trace support (x86-64)

These are the x86_64-specific pieces to enable reliable stack traces. The
only restriction with this is that it currently cannot unwind across the
interrupt->normal stack boundary, as that transition is lacking proper
annotation.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: reliable stack trace support

These are the generic bits needed to enable reliable stack traces based
on Dwarf2-like (.eh_frame) unwind information. Subsequent patches will
enable x86-64 and i386 to make use of this.

Thanks to Andi Kleen and Ingo Molnar, who pointed out several possibilities
for improvement.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: x86_86 msi miss one entry handler

  In x86_64 architecture, if device driver with msi function
gets 0xee vector by assign_irq_vector() function, system will
crash if this interrupt happens. It is because 0xee interrupt
entry is empty. This patch modifies this. This patch is based
on 2.6.17-rc6.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Rename IOMMU option, fix help and mark option embedded.

 - Rename the GART_IOMMU option to IOMMU to make clear it's not
   just for AMD
 - Rewrite the help text to better emphatise this fact
 - Make it an embedded option because too many people get it wrong.

To my astonishment I discovered the aacraid driver tests this
symbol directly. This looks quite broken to me - it's an internal
implementation detail of the PCI DMA API. Can the maintainer
please clarify what this test was intended to do?

Cc: linux-scsi@vger.kernel.org
Cc: alan@redhat.com
Cc: markh@osdl.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Make sure is_compat_task works early

Previously it would only work in the first 32bit system call, not during
early process setup.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: fix vector_lock deadlock in io_apic.c

Fix a potential deadlock scenario introduced by io_apic.c's new vector_lock
on i386 and x86_64.

Found by the locking correctness validator. The patch was boot-tested on
x86. For details of the deadlock scenario, see the validator output:

  ======================================================
  [ BUG: hard-safe -> hard-unsafe lock order detected! ]
  ------------------------------------------------------
  idle/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
   (msi_lock){....}, at: [<c04ff8d2>] startup_msi_irq_wo_maskbit+0x10/0x35

  and this task is already holding:
   (&irq_desc[i].lock){++..}, at: [<c015b924>] probe_irq_on+0x36/0x107
  which would create a new lock dependency:
   (&irq_desc[i].lock){++..} -> (msi_lock){....}

  but this new dependency connects a hard-irq-safe lock:
   (&irq_desc[i].lock){++..}
  ... which became hard-irq-safe at:
    [<c01468c4>] lockdep_acquire+0x68/0x84
    [<c10485e9>] _spin_lock+0x21/0x2f
    [<c015aff5>] __do_IRQ+0x3d/0x113
    [<c01062d3>] do_IRQ+0x8c/0xad

  to a hard-irq-unsafe lock:
   (vector_lock){--..}
  ... which became hard-irq-unsafe at:
  ...  [<c01468c4>] lockdep_acquire+0x68/0x84
    [<c10485e9>] _spin_lock+0x21/0x2f
    [<c011b5e8>] assign_irq_vector+0x34/0xc8
    [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff
    [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa
    [<c010033f>] init+0x32/0x2cb
    [<c0102005>] kernel_thread_helper+0x5/0xb

  which could potentially lead to deadlocks!

  other info that might help us debug this:

  3 locks held by idle/1:
   #0:  (port_mutex){--..}, at: [<c067070d>] uart_add_one_port+0x61/0x289
   #1:  (&state->mutex){--..}, at: [<c067071f>] uart_add_one_port+0x73/0x289
   #2:  (&irq_desc[i].lock){++..}, at: [<c015b924>] probe_irq_on+0x36/0x107

  the hard-irq-safe lock's dependencies:
  -> (&irq_desc[i].lock){++..} ops: 9861 {
     initial-use  at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                          [<c015b415>] setup_irq+0x9b/0x14d
                          [<c1aaa4c4>] time_init_hook+0xf/0x11
                          [<c1a9f320>] time_init+0x44/0x46
                          [<c1a9955f>] start_kernel+0x191/0x38f
                          [<c0100210>] 0xc0100210
     in-hardirq-W at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c015aff5>] __do_IRQ+0x3d/0x113
                          [<c01062d3>] do_IRQ+0x8c/0xad
     in-softirq-W at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c015aff5>] __do_IRQ+0x3d/0x113
                          [<c01062d3>] do_IRQ+0x8c/0xad
   }
   ... key      at: [<c1ea31e0>] irq_desc_lock_type+0x0/0x20
    -> (i8259A_lock){++..} ops: 5149 {
       initial-use  at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c0108090>] init_8259A+0x11/0x8f
                        [<c1aa0d22>] init_ISA_irqs+0x12/0x4d
                        [<c1aaa4f0>] pre_intr_init_hook+0x8/0xa
                        [<c1aa0cb9>] init_IRQ+0xe/0x65
                        [<c1a99546>] start_kernel+0x178/0x38f
                        [<c0100210>] 0xc0100210
       in-hardirq-W at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc
                        [<c015b007>] __do_IRQ+0x4f/0x113
                        [<c01062d3>] do_IRQ+0x8c/0xad
       in-softirq-W at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc
                        [<c015b007>] __do_IRQ+0x4f/0x113
                        [<c01062d3>] do_IRQ+0x8c/0xad
     }
     ... key      at: [<c142f174>] i8259A_lock+0x14/0x40
   ... acquired at:
     [<c01468c4>] lockdep_acquire+0x68/0x84
     [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
     [<c0107eb2>] enable_8259A_irq+0x10/0x47
     [<c0107f12>] startup_8259A_irq+0x8/0xc
     [<c015b45e>] setup_irq+0xe4/0x14d
     [<c1aaa4c4>] time_init_hook+0xf/0x11
     [<c1a9f320>] time_init+0x44/0x46
     [<c1a9955f>] start_kernel+0x191/0x38f
     [<c0100210>] 0xc0100210

    -> (ioapic_lock){+...} ops: 122 {
       initial-use  at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c1aa71db>] io_apic_get_version+0x16/0x55
                        [<c1aa5c73>] mp_register_ioapic+0xc6/0x127
                        [<c1aa382e>] acpi_parse_ioapic+0x2d/0x39
                        [<c1abe031>] acpi_table_parse_madt_family+0xb4/0x100
                        [<c1abe093>] acpi_table_parse_madt+0x16/0x18
                        [<c1aa3c8a>] acpi_boot_init+0x132/0x251
                        [<c1aa08ea>] setup_arch+0xd36/0xe37
                        [<c1a99434>] start_kernel+0x66/0x38f
                        [<c0100210>] 0xc0100210
       in-hardirq-W at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c011bce1>] mask_IO_APIC_irq+0x11/0x31
                        [<c011c5cc>] ack_edge_ioapic_vector+0x31/0x41
                        [<c015b007>] __do_IRQ+0x4f/0x113
                        [<c01062d3>] do_IRQ+0x8c/0xad
     }
     ... key      at: [<c1432514>] ioapic_lock+0x14/0x3c
      -> (i8259A_lock){++..} ops: 5149 {
         initial-use  at:
                         [<c01468c4>] lockdep_acquire+0x68/0x84
                         [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                         [<c0108090>] init_8259A+0x11/0x8f
                         [<c1aa0d22>] init_ISA_irqs+0x12/0x4d
                         [<c1aaa4f0>] pre_intr_init_hook+0x8/0xa
                         [<c1aa0cb9>] init_IRQ+0xe/0x65
                         [<c1a99546>] start_kernel+0x178/0x38f
                         [<c0100210>] 0xc0100210
         in-hardirq-W at:
                         [<c01468c4>] lockdep_acquire+0x68/0x84
                         [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                         [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc
                         [<c015b007>] __do_IRQ+0x4f/0x113
                         [<c01062d3>] do_IRQ+0x8c/0xad
         in-softirq-W at:
                         [<c01468c4>] lockdep_acquire+0x68/0x84
                         [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                         [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc
                         [<c015b007>] __do_IRQ+0x4f/0x113
                         [<c01062d3>] do_IRQ+0x8c/0xad
       }
       ... key      at: [<c142f174>] i8259A_lock+0x14/0x40
     ... acquired at:
     [<c01468c4>] lockdep_acquire+0x68/0x84
     [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
     [<c0107e6b>] disable_8259A_irq+0x10/0x47
     [<c011bdbd>] startup_edge_ioapic_vector+0x31/0x58
     [<c015b45e>] setup_irq+0xe4/0x14d
     [<c015b5a1>] request_irq+0xda/0xf9
     [<c1ac983a>] rtc_init+0x6a/0x1a7
     [<c0100457>] init+0x14a/0x2cb
     [<c0102005>] kernel_thread_helper+0x5/0xb

   ... acquired at:
     [<c01468c4>] lockdep_acquire+0x68/0x84
     [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
     [<c011bce1>] mask_IO_APIC_irq+0x11/0x31
     [<c011c5cc>] ack_edge_ioapic_vector+0x31/0x41
     [<c015b007>] __do_IRQ+0x4f/0x113
     [<c01062d3>] do_IRQ+0x8c/0xad

  the hard-irq-unsafe lock's dependencies:
  -> (vector_lock){--..} ops: 31 {
     initial-use  at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c011b5e8>] assign_irq_vector+0x34/0xc8
                          [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff
                          [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa
                          [<c010033f>] init+0x32/0x2cb
                          [<c0102005>] kernel_thread_helper+0x5/0xb
     softirq-on-W at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c011b5e8>] assign_irq_vector+0x34/0xc8
                          [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff
                          [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa
                          [<c010033f>] init+0x32/0x2cb
                          [<c0102005>] kernel_thread_helper+0x5/0xb
     hardirq-on-W at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c011b5e8>] assign_irq_vector+0x34/0xc8
                          [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff
                          [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa
                          [<c010033f>] init+0x32/0x2cb
                          [<c0102005>] kernel_thread_helper+0x5/0xb
   }
   ... key      at: [<c1432574>] vector_lock+0x14/0x3c

  stack backtrace:
   [<c0104f36>] show_trace+0xd/0xf
   [<c010543e>] dump_stack+0x17/0x19
   [<c0144e34>] check_usage+0x1f6/0x203
   [<c0146395>] __lockdep_acquire+0x8c2/0xaa5
   [<c01468c4>] lockdep_acquire+0x68/0x84
   [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
   [<c04ff8d2>] startup_msi_irq_wo_maskbit+0x10/0x35
   [<c015b932>] probe_irq_on+0x44/0x107
   [<c0673d58>] serial8250_config_port+0x84b/0x986
   [<c06707b1>] uart_add_one_port+0x105/0x289
   [<c1ace54b>] serial8250_init+0xc3/0x10a
   [<c0100457>] init+0x14a/0x2cb
   [<c0102005>] kernel_thread_helper+0x5/0xb

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: remove unused gart header file

include/asm-x86_64/gart-mapping.h is only ever used in
arch/x86_64/kernel/setup.c and none of its contents are referenced.
Looks to be leftover cruft not removed in the dma_ops patch.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Optimize bitmap_weight for small bitmaps

Use inline code bitmaps <= BITS_PER_LONG in bitmap_weight. This
gives _much_ better code.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove ia32_sys_call_table export

It was originally added for 2.4 oprofile, but 2.6 oprofile doesn't
need that anymore. Shouldn't be any use in tree anymore and it doesn't
make much sense to export the ia32 syscalls when the main syscalls
are not exported.

I think Adrian Bunk asked for removing it several times.

Also included hunk from Adrian to remove the .globl ia32_sys_call_table

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove long obsolete CVS

Early development of x86-64 Linux was in CVS, but that hasn't been
the case for a long time now. Remove the obsolete $Id$s.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: nmi watchdog header cleanup

Misc header cleanup for nmi watchdog.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: fix unlikely profiling & vsyscalls on x86_64

fix unlikely profiling in vsyscalls ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S

Since END()/ENDPROC() are now available, add respective annotations to
x86_64's entry.S. This should help debugging activities.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Add compat_printk and sysctl to turn off compat layer warnings

Sometimes e.g. with crashme the compat layer warnings can be noisy.
Add a way to turn them off by gating all output through compat_printk
that checks a global sysctl. The default is not changed.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Use -ENODEV in IOMMU initialization

Fix

initcall at 0xffffffff806c5b89: pci_iommu_init+0x0/0x53c(): returned with error code -1

Return -ENODEV instead when the IOMMU is not used.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: simplify ioapic_register_intr()

Simplify (remove duplication of) code in ioapic_register_intr().

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: serialize assign_irq_vector() use of static variables

Since assign_irq_vector() can be called at runtime, its access of static
variables should be protected by a lock.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Clean and enhance up K8 northbridge access code

 - Factor out the duplicated access/cache code into a single file
   * Shared between i386/x86-64.
 - Share flush code between AGP and IOMMU
   * Fix a bug: AGP didn't wait for end of flush before
 - Drop 8 northbridges limit and allocate dynamically
 - Add lock to serialize AGP and IOMMU GART flushes
 - Add PCI ID for next AMD northbridge
 - Random related cleanups

The old K8 NUMA discovery code is unchanged. New systems
should all use SRAT for this.

Cc: "Navin Boppuri" <navin.boppuri@newisys.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: trivial gart clean-up

A trivial change to have gart_unmap_sg call gart_unmap_single directly,
instead of bouncing through the dma_unmap_single wrapper in
dma-mapping.h.

This change required moving the gart_unmap_single above gart_unmap_sg,
and under gart_map_single (which seems a more logical place that its
current location IMHO).

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Implement compat functions for PTRACE_SETSIGINFO/GETSIGINFO

Previously we would just silently provide 64 bit services
for this to 32bit processes.

I also added all the other cases explicitely to the ptrace
compat wrapper to make sure this doesn't happen again.

And removed one bogus check in the wrapper.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: iommu_gart_bitmap search to cross next_bit

Allow search for a contiguous block of iommu space to cross the next_bit
marker if we have already committed ourselves to flushing the gart.

There shouldn't be any reason why we'd restrict the search.

Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove bogus comment in topology.h

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: x86_64-enable-large-bzImage.patch

enable large bzImages on x86_64. (fix is from x86's build.c) Using this
patch i have successfully built and booted an allyesconfig 13MB+ bzImage
on x86_64 too:

 $ size64 vmlinux
    text    data     bss     dec     hex filename
 23444831        8202642 3439360 35086833        21761f1 vmlinux

 -rw-rw-r--  1 mingo mingo 13121740 Apr 19 09:32 arch/x86_64/boot/bzImage

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove most of ia32_unistd.h

It's only needed for three system calls, no need to maintain
a full list forever.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: pci-dma.c clean-up - trivial

Replace hard coded DMA masks with #defines from
include/linux/dma-mapping.h

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: x86_64 version of the smp alternative patch.

Changes are largely identical to the i386 version:

 * alternative #define are moved to the new alternative.h file.
 * one new elf section with pointers to the lock prefixes which can be
   nop'ed out for non-smp.
 * two new elf sections simliar to the "classic" alternatives to
   replace SMP code with simpler UP code.
 * fixup headers to use alternative.h instead of defining their own
   LOCK / LOCK_PREFIX macros.

The patch reuses the i386 version of the alternatives code to avoid code
duplication.  The code in alternatives.c was shuffled around a bit to
reduce the number of #ifdefs needed.  It also got some tweaks needed for
x86_64 (vsyscall page handling) and new features (noreplacement option
which was x86_64 only up to now).  Debug printk's are changed from
compile-time to runtime.

Loosely based on a early version from Bastian Blank <waldi@debian.org>

Signed-off-by: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: Emulate CPUID4 on AMD

Intel systems report the cache level data from CPUID 4 in sysfs.
Add a CPUID 4 emulation for AMD CPUs to report the same
information for them. This allows programs to read this
information in a uniform way.

The AMD way to report this is less flexible so some assumptions
are hardcoded (e.g. no L3)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: Use new official CPUID to get APICID/core split on AMD platforms

Previously the apicid<->coreid split was computed based on the max
number of cores. Now use a new CPUID AMD defined for that. On most
systems right now it should be 0 and the old method will be used.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Use __always_inline for __inline_memcpy

Inspired from i386 changes

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Use local APIC ID from local APIC instead of CPUID

vSMPowered systems use apic_cluster too.  Forcing apic_physflat works
on these systems too, but only if we change phys_pkg_id to use
hard_smp_prcoessor_id() instead of cpuid_ebx.  I am guessing other
multichassi cluster systems would need this too.

Signed-off-by: ravikiran thirumalai <kiran@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Update defconfig

Enable some hwmon drivers as modules and tulip and stack unwinding

Kernel image should be somewhat bigger now because of the unwind
information being included, but you'll get exact backtraces for that.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uclinux: use PER_LINUX_32BIT in binfmt_flat

binfmt_flat.c calls set_personality with PER_LINUX as the personality.
On the arm architecture this results in the program running in 26bit
usermode.  PER_LINUX_32BIT should be used instead.  This doesn't affect
other architectures that use binfmt_flat.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: make enable_irq() macro statement

Change enable_irq() macro to be a statement, not expression.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: fix ColdFire 5249 PLL set

Fix PLL setting for the Coldfire 5249 CPU. This brings it into line with
the new style frequency configuration of m68knommu parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: ColdFire cache flush fixups

Fix flush code for the ColdFire 5206/5206e/5272 cases.
Add support for the new ColdFire 532x CPU family

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: improve syscall entry and fix strace

Here is a patch to the system call handling for 5307/5272/etc to:

- fix the strace support (one tested the wrong bit)
- make all system calls a little bit faster by inlining set_esp0 and
  supporting ENOSYS out of the critical path.
- remove extraneous spaces

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: force stack alignment on ColdFire

This patch solve a bug triggered by execvp (this function use calloc to
store the argument list and gcc 3.4.x align the stack to word, not to dword).
This situation aren't related to signal handling and all 2.6.x have the bug.
On ColdFire targets we must force the stack to be aligned.

Original patch from Andrea Tarani <andrea.tarani@gilbarco.com>,

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: configurable frequency selection header

Remove list of fixed clock frequency options used for configuring master
clock, and make field an int. Much more flexible this way, no need to add
more options for every new used freqency.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: configurable frequency selection

Remove list of fixed clock frequency options used for configuring master
clock, and make field an int. Much more flexible this way, no need to add
more options for every new used freqency.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: configure support for Avnet5282 board

Add support for the AVNET 5282 board.
Patch submitted by Daniel Alomar <dalomar@serrasold.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: ColdFire 532x CPU configure support

Add configure support for the new Freescale 532x family of CPUs.
Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert "swsusp special saveable pages support" commits

This reverts commits

  3e3318dee0878d42ed62a19c292a2ac284135db3 [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages
  b6370d96e09944c6e3ae8d5743ca8a8ab1f79f6c [PATCH] swsusp: i386 mark special saveable/unsaveable pages
  ce4ab0012b32c1a4a1d6e934aeb73bf3151c48d9 [PATCH] swsusp: add architecture special saveable pages support

because not only do they apparently cause page faults on x86, the
infrastructure doesn't compile on powerpc.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: ColdFire 532x CPU platform build support

Add build support for the new Freescale 532x CPU platforms.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: add ColdFire 532x UART address support

Add support for the UART addressing on the new Freescale M532x CPU family.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: add ColdFire 532x timer build support

Add build support for new Freescale M532x CPU family timer.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: cleanup setup.c

A cleanup of m68knommu/kernel/setup.c :

- No need to initialize global pointers to NULL, they will have that value
  automatically, and they eat up space in my data segment image in FLASH.
- Remove get_cpuinfo.  It has been replaced by show_cpuinfo.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: check DEBUG defined arch code

Don't rely on DEBUG having a value, check for it being defined.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: include ColdFire 532x register definitions

Include the ColdFire 532x support when including ColdFire peripharp
support definitions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: add ColdFire 532x cache init

Add cache init support for the new ColdFire 532x CPU family.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>