openwrt/staging/blogic.git
4 years agomm: memcg: make memory.oom.group tolerable to task migration
Roman Gushchin [Thu, 2 Apr 2020 04:07:39 +0000 (21:07 -0700)]
mm: memcg: make memory.oom.group tolerable to task migration

If a task is getting moved out of the OOMing cgroup, it might result in
unexpected OOM killings if memory.oom.group is used anywhere in the cgroup
tree.

Imagine the following example:

          A (oom.group = 1)
         / \
  (OOM) B   C

Let's say B's memory.max is exceeded and it's OOMing.  The OOM killer
selects a task in B as a victim, but someone asynchronously moves the task
into C.  mem_cgroup_get_oom_group() will iterate over all ancestors of C
up to the root cgroup.  In theory it had to stop at the oom_domain level -
the memory cgroup which is OOMing.  But because B is not an ancestor of C,
it's not happening.  Instead it chooses A (because it's oom.group is set),
and kills all tasks in A.  This behavior is wrong because the OOM happened
in B, so there is no reason to kill anything outside.

Fix this by checking it the memory cgroup to which the task belongs is a
descendant of the oom_domain.  If not, memory.oom.group should be ignored,
and the OOM killer should kill only the victim task.

Reported-by: Dan Schatzberg <dschatzberg@fb.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/20200316223510.3176148-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, memcg: prevent mem_cgroup_protected store tearing
Chris Down [Thu, 2 Apr 2020 04:07:33 +0000 (21:07 -0700)]
mm, memcg: prevent mem_cgroup_protected store tearing

The read side of this is all protected, but we can still tear if multiple
iterations of mem_cgroup_protected are going at the same time.

There's some intentional racing in mem_cgroup_protected which is ok, but
load/store tearing should be avoided.

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/d1e9fbc0379fe8db475d82c8b6fbe048876e12ae.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, memcg: prevent memory.swap.max load tearing
Chris Down [Thu, 2 Apr 2020 04:07:30 +0000 (21:07 -0700)]
mm, memcg: prevent memory.swap.max load tearing

The write side of this is xchg()/smp_mb(), so that's all good.  Just a few
sites missing a READ_ONCE.

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/bbec2c3d822217334855c8877a9d28b2a6d395fb.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, memcg: prevent memory.min load/store tearing
Chris Down [Thu, 2 Apr 2020 04:07:27 +0000 (21:07 -0700)]
mm, memcg: prevent memory.min load/store tearing

This can be set concurrently with reads, which may cause the wrong value
to be propagated.

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/e809b4e6b0c1626dac6945970de06409a180ee65.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, memcg: prevent memory.low load/store tearing
Chris Down [Thu, 2 Apr 2020 04:07:24 +0000 (21:07 -0700)]
mm, memcg: prevent memory.low load/store tearing

This can be set concurrently with reads, which may cause the wrong value
to be propagated.

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/448206f44b0fa7be9dad2ca2601d2bcb2c0b7844.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, memcg: prevent memory.max load tearing
Chris Down [Thu, 2 Apr 2020 04:07:20 +0000 (21:07 -0700)]
mm, memcg: prevent memory.max load tearing

This one is a bit more nuanced because we have memcg_max_mutex, which is
mostly just used for enforcing invariants, but we still need to READ_ONCE
since (despite its name) it doesn't really protect memory.max access.

On write (page_counter_set_max() and memory_max_write()) we use xchg(),
which uses smp_mb(), so that's already fine.

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/50a31e5f39f8ae6c8fb73966ba1455f0924e8f44.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, memcg: prevent memory.high load/store tearing
Chris Down [Thu, 2 Apr 2020 04:07:17 +0000 (21:07 -0700)]
mm, memcg: prevent memory.high load/store tearing

A mem_cgroup's high attribute can be concurrently set at the same time as
we are trying to read it -- for example, if we are in memory_high_write at
the same time as we are trying to do high reclaim.

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/2f66f7038ed1d4688e59de72b627ae0ea52efa83.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memcontrol.c: make mem_cgroup_id_get_many() __maybe_unused
Vincenzo Frascino [Thu, 2 Apr 2020 04:07:13 +0000 (21:07 -0700)]
mm/memcontrol.c: make mem_cgroup_id_get_many() __maybe_unused

mem_cgroup_id_get_many() is currently used only when MMU or MEMCG_SWAP
configuration options are enabled.  Having them disabled triggers the
following warning at compile time:

  linux/mm/memcontrol.c:4797:13: warning: `mem_cgroup_id_get_many' defined but not used [-Wunused-function]
   static void mem_cgroup_id_get_many(struct mem_cgroup *memcg, unsigned int n)

Make mem_cgroup_id_get_many() __maybe_unused to address the issue.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200305164354.48147-1-vincenzo.frascino@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomemcg: css_tryget_online cleanups
Shakeel Butt [Thu, 2 Apr 2020 04:07:10 +0000 (21:07 -0700)]
memcg: css_tryget_online cleanups

Currently multiple locations in memcg code, css_tryget_online() is being
used. However it doesn't matter whether the cgroup is online for the
callers. Online used to matter when we had reparenting on offlining and
we needed a way to prevent new ones from showing up.

The failure case for couple of these css_tryget_online usage is to
fallback to root_mem_cgroup which kind of make bypassing the memcg
limits possible for some workloads. For example creating an inotify
group in a subcontainer and then deleting that container after moving the
process to a different container will make all the event objects
allocated for that group to the root_mem_cgroup. So, using
css_tryget_online() is dangerous for such cases.

Two locations still use the online version. The swapin of offlined
memcg's pages and the memcg kmem cache creation. The kmem cache indeed
needs the online version as the kernel does the reparenting of memcg
kmem caches. For the swapin case, it has been left for later as the
fallback is not really that concerning.

With swap accounting enabled, if the memcg of the swapped out page is
not online then the memcg extracted from the given 'mm' will be charged
and if 'mm' is NULL then root memcg will be charged.  However I could
not find a code path where the given 'mm' will be NULL for swap-in
case.

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/20200302203109.179417-1-shakeelb@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: memcontrol: recursive memory.low protection
Johannes Weiner [Thu, 2 Apr 2020 04:07:07 +0000 (21:07 -0700)]
mm: memcontrol: recursive memory.low protection

Right now, the effective protection of any given cgroup is capped by its
own explicit memory.low setting, regardless of what the parent says.  The
reasons for this are mostly historical and ease of implementation: to make
delegation of memory.low safe, effective protection is the min() of all
memory.low up the tree.

Unfortunately, this limitation makes it impossible to protect an entire
subtree from another without forcing the user to make explicit protection
allocations all the way to the leaf cgroups - something that is highly
undesirable in real life scenarios.

Consider memory in a data center host.  At the cgroup top level, we have a
distinction between system management software and the actual workload the
system is executing.  Both branches are further subdivided into individual
services, job components etc.

We want to protect the workload as a whole from the system management
software, but that doesn't mean we want to protect and prioritize
individual workload wrt each other.  Their memory demand can vary over
time, and we'd want the VM to simply cache the hottest data within the
workload subtree.  Yet, the current memory.low limitations force us to
allocate a fixed amount of protection to each workload component in order
to get protection from system management software in general.  This
results in very inefficient resource distribution.

Another concern with mandating downward allocation is that, as the
complexity of the cgroup tree grows, it gets harder for the lower levels
to be informed about decisions made at the host-level.  Consider a
container inside a namespace that in turn creates its own nested tree of
cgroups to run multiple workloads.  It'd be extremely difficult to
configure memory.low parameters in those leaf cgroups that on one hand
balance pressure among siblings as the container desires, while also
reflecting the host-level protection from e.g.  rpm upgrades, that lie
beyond one or more delegation and namespacing points in the tree.

It's highly unusual from a cgroup interface POV that nested levels have to
be aware of and reflect decisions made at higher levels for them to be
effective.

To enable such use cases and scale configurability for complex trees, this
patch implements a resource inheritance model for memory that is similar
to how the CPU and the IO controller implement work-conserving resource
allocations: a share of a resource allocated to a subree always applies to
the entire subtree recursively, while allowing, but not mandating,
children to further specify distribution rules.

That means that if protection is explicitly allocated among siblings,
those configured shares are being followed during page reclaim just like
they are now.  However, if the memory.low set at a higher level is not
fully claimed by the children in that subtree, the "floating" remainder is
applied to each cgroup in the tree in proportion to its size.  Since
reclaim pressure is applied in proportion to size as well, each child in
that tree gets the same boost, and the effect is neutral among siblings -
with respect to each other, they behave as if no memory control was
enabled at all, and the VM simply balances the memory demands optimally
within the subtree.  But collectively those cgroups enjoy a boost over the
cgroups in neighboring trees.

E.g.  a leaf cgroup with a memory.low setting of 0 no longer means that
it's not getting a share of the hierarchically assigned resource, just
that it doesn't claim a fixed amount of it to protect from its siblings.

This allows us to recursively protect one subtree (workload) from another
(system management), while letting subgroups compete freely among each
other - without having to assign fixed shares to each leaf, and without
nested groups having to echo higher-level settings.

The floating protection composes naturally with fixed protection.
Consider the following example tree:

A            A: low = 2G
               / \          A1: low = 1G
              A1 A2         A2: low = 0G

As outside pressure is applied to this tree, A1 will enjoy a fixed
protection from A2 of 1G, but the remaining, unclaimed 1G from A is split
evenly among A1 and A2, coming out to 1.5G and 0.5G.

There is a slight risk of regressing theoretical setups where the
top-level cgroups don't know about the true budgeting and set bogusly high
"bypass" values that are meaningfully allocated down the tree.  Such
setups would rely on unclaimed protection to be discarded, and
distributing it would change the intended behavior.  Be safe and hide the
new behavior behind a mount option, 'memory_recursiveprot'.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Link: http://lkml.kernel.org/r/20200227195606.46212-4-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: memcontrol: clean up and document effective low/min calculations
Johannes Weiner [Thu, 2 Apr 2020 04:07:03 +0000 (21:07 -0700)]
mm: memcontrol: clean up and document effective low/min calculations

The effective protection of any given cgroup is a somewhat complicated
construct that depends on the ancestor's configuration, siblings'
configurations, as well as current memory utilization in all these groups.
It's done this way to satisfy hierarchical delegation requirements while
also making the configuration semantics flexible and expressive in complex
real life scenarios.

Unfortunately, all the rules and requirements are sparsely documented, and
the code is a little too clever in merging different scenarios into a
single min() expression.  This makes it hard to reason about the
implementation and avoid breaking semantics when making changes to it.

This patch documents each semantic rule individually and splits out the
handling of the overcommit case from the regular case.

Michal Koutný also points out that the points of equilibrium as described
in the existing example scenarios aren't actually accurate.  Delete these
examples for now to avoid confusion.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Link: http://lkml.kernel.org/r/20200227195606.46212-3-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: memcontrol: fix memory.low proportional distribution
Johannes Weiner [Thu, 2 Apr 2020 04:07:00 +0000 (21:07 -0700)]
mm: memcontrol: fix memory.low proportional distribution

Patch series "mm: memcontrol: recursive memory.low protection", v3.

The current memory.low (and memory.min) semantics require protection to be
assigned to a cgroup in an untinterrupted chain from the top-level cgroup
all the way to the leaf.

In practice, we want to protect entire cgroup subtrees from each other
(system management software vs.  workload), but we would like the VM to
balance memory optimally *within* each subtree, without having to make
explicit weight allocations among individual components.  The current
semantics make that impossible.

They also introduce unmanageable complexity into more advanced resource
trees.  For example:

          host root
          `- system.slice
             `- rpm upgrades
             `- logging
          `- workload.slice
             `- a container
                `- system.slice
                `- workload.slice
                   `- job A
                      `- component 1
                      `- component 2
                   `- job B

At a host-level perspective, we would like to protect the outer
workload.slice subtree as a whole from rpm upgrades, logging etc.  But for
that to be effective, right now we'd have to propagate it down through the
container, the inner workload.slice, into the job cgroup and ultimately
the component cgroups where memory is actually, physically allocated.
This may cross several tree delegation points and namespace boundaries,
which make such a setup near impossible.

CPU and IO on the other hand are already distributed recursively.  The
user would simply configure allowances at the host level, and they would
apply to the entire subtree without any downward propagation.

To enable the above-mentioned usecases and bring memory in line with other
resource controllers, this patch series extends memory.low/min such that
settings apply recursively to the entire subtree.  Users can still assign
explicit shares in subgroups, but if they don't, any ancestral protection
will be distributed such that children compete freely amongst each other -
as if no memory control were enabled inside the subtree - but enjoy
protection from neighboring trees.

In the above example, the user would then be able to configure shares of
CPU, IO and memory at the host level to comprehensively protect and
isolate the workload.slice as a whole from system.slice activity.

Patch #1 fixes an existing bug that can give a cgroup tree more protection
than it should receive as per ancestor configuration.

Patch #2 simplifies and documents the existing code to make it easier to
reason about the changes in the next patch.

Patch #3 finally implements recursive memory protection semantics.

Because of a risk of regressing legacy setups, the new semantics are
hidden behind a cgroup2 mount option, 'memory_recursiveprot'.

More details in patch #3.

This patch (of 3):

When memory.low is overcommitted - i.e.  the children claim more
protection than their shared ancestor grants them - the allowance is
distributed in proportion to how much each sibling uses their own declared
protection:

low_usage = min(memory.low, memory.current)
elow = parent_elow * (low_usage / siblings_low_usage)

However, siblings_low_usage is not the sum of all low_usages. It sums
up the usages of *only those cgroups that are within their memory.low*
That means that low_usage can be *bigger* than siblings_low_usage, and
consequently the total protection afforded to the children can be
bigger than what the ancestor grants the subtree.

Consider three groups where two are in excess of their protection:

  A/memory.low = 10G
  A/A1/memory.low = 10G, memory.current = 20G
  A/A2/memory.low = 10G, memory.current = 20G
  A/A3/memory.low = 10G, memory.current =  8G
  siblings_low_usage = 8G (only A3 contributes)

  A1/elow = parent_elow(10G) * low_usage(10G) / siblings_low_usage(8G) = 12.5G -> 10G
  A2/elow = parent_elow(10G) * low_usage(10G) / siblings_low_usage(8G) = 12.5G -> 10G
  A3/elow = parent_elow(10G) * low_usage(8G) / siblings_low_usage(8G) = 10.0G

  (the 12.5G are capped to the explicit memory.low setting of 10G)

With that, the sum of all awarded protection below A is 30G, when A
only grants 10G for the entire subtree.

What does this mean in practice? A1 and A2 would still be in excess of
their 10G allowance and would be reclaimed, whereas A3 would not. As
they eventually drop below their protection setting, they would be
counted in siblings_low_usage again and the error would right itself.

When reclaim was applied in a binary fashion (cgroup is reclaimed when
it's above its protection, otherwise it's skipped) this would actually
work out just fine. However, since 1bc63fb1272b ("mm, memcg: make scan
aggression always exclude protection"), reclaim pressure is scaled to
how much a cgroup is above its protection. As a result this
calculation error unduly skews pressure away from A1 and A2 toward the
rest of the system.

But why did we do it like this in the first place?

The reasoning behind exempting groups in excess from
siblings_low_usage was to go after them first during reclaim in an
overcommitted subtree:

  A/memory.low = 2G, memory.current = 4G
  A/A1/memory.low = 3G, memory.current = 2G
  A/A2/memory.low = 1G, memory.current = 2G

  siblings_low_usage = 2G (only A1 contributes)
  A1/elow = parent_elow(2G) * low_usage(2G) / siblings_low_usage(2G) = 2G
  A2/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(2G) = 1G

While the children combined are overcomitting A and are technically
both at fault, A2 is actively declaring unprotected memory and we
would like to reclaim that first.

However, while this sounds like a noble goal on the face of it, it
doesn't make much difference in actual memory distribution: Because A
is overcommitted, reclaim will not stop once A2 gets pushed back to
within its allowance; we'll have to reclaim A1 either way. The end
result is still that protection is distributed proportionally, with A1
getting 3/4 (1.5G) and A2 getting 1/4 (0.5G) of A's allowance.

[ If A weren't overcommitted, it wouldn't make a difference since each
  cgroup would just get the protection it declares:

  A/memory.low = 2G, memory.current = 3G
  A/A1/memory.low = 1G, memory.current = 1G
  A/A2/memory.low = 1G, memory.current = 2G

  With the current calculation:

  siblings_low_usage = 1G (only A1 contributes)
  A1/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(1G) = 2G -> 1G
  A2/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(1G) = 2G -> 1G

  Including excess groups in siblings_low_usage:

  siblings_low_usage = 2G
  A1/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(2G) = 1G -> 1G
  A2/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(2G) = 1G -> 1G ]

Simplify the calculation and fix the proportional reclaim bug by
including excess cgroups in siblings_low_usage.

After this patch, the effective memory.low distribution from the
example above would be as follows:

  A/memory.low = 10G
  A/A1/memory.low = 10G, memory.current = 20G
  A/A2/memory.low = 10G, memory.current = 20G
  A/A3/memory.low = 10G, memory.current =  8G
  siblings_low_usage = 28G

  A1/elow = parent_elow(10G) * low_usage(10G) / siblings_low_usage(28G) = 3.5G
  A2/elow = parent_elow(10G) * low_usage(10G) / siblings_low_usage(28G) = 3.5G
  A3/elow = parent_elow(10G) * low_usage(8G) / siblings_low_usage(28G) = 2.8G

Fixes: 1bc63fb1272b ("mm, memcg: make scan aggression always exclude protection")
Fixes: 230671533d64 ("mm: memory.low hierarchical behavior")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Link: http://lkml.kernel.org/r/20200227195606.46212-2-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: kmem: rename (__)memcg_kmem_(un)charge_memcg() to __memcg_kmem_(un)charge()
Roman Gushchin [Thu, 2 Apr 2020 04:06:56 +0000 (21:06 -0700)]
mm: kmem: rename (__)memcg_kmem_(un)charge_memcg() to __memcg_kmem_(un)charge()

Drop the _memcg suffix from (__)memcg_kmem_(un)charge functions.  It's
shorter and more obvious.

These are the most basic functions which are just (un)charging the given
cgroup with the given amount of pages.

Also fix up the corresponding comments.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-7-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: memcg/slab: cache page number in memcg_(un)charge_slab()
Roman Gushchin [Thu, 2 Apr 2020 04:06:53 +0000 (21:06 -0700)]
mm: memcg/slab: cache page number in memcg_(un)charge_slab()

There are many places in memcg_charge_slab() and memcg_uncharge_slab()
which are calculating the number of pages to charge, css references to
grab etc depending on the order of the slab page.

Let's simplify the code by calculating it once and caching in the local
variable.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-6-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: kmem: switch to nr_pages in (__)memcg_kmem_charge_memcg()
Roman Gushchin [Thu, 2 Apr 2020 04:06:49 +0000 (21:06 -0700)]
mm: kmem: switch to nr_pages in (__)memcg_kmem_charge_memcg()

These functions are charging the given number of kernel pages to the given
memory cgroup.  The number doesn't have to be a power of two.  Let's make
them to take the unsigned int nr_pages as an argument instead of the page
order.

It makes them look consistent with the corresponding uncharge functions
and functions like: mem_cgroup_charge_skmem(memcg, nr_pages).

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-5-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: kmem: rename memcg_kmem_(un)charge() into memcg_kmem_(un)charge_page()
Roman Gushchin [Thu, 2 Apr 2020 04:06:46 +0000 (21:06 -0700)]
mm: kmem: rename memcg_kmem_(un)charge() into memcg_kmem_(un)charge_page()

Rename (__)memcg_kmem_(un)charge() into (__)memcg_kmem_(un)charge_page()
to better reflect what they are actually doing:

1) call __memcg_kmem_(un)charge_memcg() to actually charge or uncharge
   the current memcg

2) set or clear the PageKmemcg flag

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: kmem: cleanup memcg_kmem_uncharge_memcg() arguments
Roman Gushchin [Thu, 2 Apr 2020 04:06:43 +0000 (21:06 -0700)]
mm: kmem: cleanup memcg_kmem_uncharge_memcg() arguments

Drop the unused page argument and put the memcg pointer at the first
place.  This make the function consistent with its peers:
__memcg_kmem_uncharge_memcg(), memcg_kmem_charge_memcg(), etc.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: kmem: cleanup (__)memcg_kmem_charge_memcg() arguments
Roman Gushchin [Thu, 2 Apr 2020 04:06:39 +0000 (21:06 -0700)]
mm: kmem: cleanup (__)memcg_kmem_charge_memcg() arguments

Patch series "mm: memcg: kmem API cleanup", v2.

This patchset aims to clean up the kernel memory charging API.  It doesn't
bring any functional changes, just removes unused arguments, renames some
functions and fixes some comments.

Currently it's not obvious which functions are most basic
(memcg_kmem_(un)charge_memcg()) and which are based on them
(memcg_kmem_(un)charge()).  The patchset renames these functions and
removes unused arguments:

TL;DR:
was:
  memcg_kmem_charge_memcg(page, gfp, order, memcg)
  memcg_kmem_uncharge_memcg(memcg, nr_pages)
  memcg_kmem_charge(page, gfp, order)
  memcg_kmem_uncharge(page, order)

now:
  memcg_kmem_charge(memcg, gfp, nr_pages)
  memcg_kmem_uncharge(memcg, nr_pages)
  memcg_kmem_charge_page(page, gfp, order)
  memcg_kmem_uncharge_page(page, order)

This patch (of 6):

The first argument of memcg_kmem_charge_memcg() and
__memcg_kmem_charge_memcg() is the page pointer and it's not used.  Let's
drop it.

Memcg pointer is passed as the last argument.  Move it to the first place
for consistency with other memcg functions, e.g.
__memcg_kmem_uncharge_memcg() or try_charge().

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: memcg/slab: use mem_cgroup_from_obj()
Roman Gushchin [Thu, 2 Apr 2020 04:06:36 +0000 (21:06 -0700)]
mm: memcg/slab: use mem_cgroup_from_obj()

Sometimes we need to get a memcg pointer from a charged kernel object.
The right way to get it depends on whether it's a proper slab object or
it's backed by raw pages (e.g.  it's a vmalloc alloction).  In the first
case the kmem_cache->memcg_params.memcg indirection should be used; in
other cases it's just page->mem_cgroup.

To simplify this task and hide the implementation details let's use the
mem_cgroup_from_obj() helper, which takes a pointer to any kernel object
and returns a valid memcg pointer or NULL.

Passing a kernel address rather than a pointer to a page will allow to use
this helper for per-object (rather than per-page) tracked objects in the
future.

The caller is still responsible to ensure that the returned memcg isn't
going away underneath: take the rcu read lock, cgroup mutex etc; depending
on the context.

mem_cgroup_from_kmem() defined in mm/list_lru.c is now obsolete and can be
removed.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200117203609.3146239-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memcontrol.c: allocate shrinker_map on appropriate NUMA node
Kirill Tkhai [Thu, 2 Apr 2020 04:06:33 +0000 (21:06 -0700)]
mm/memcontrol.c: allocate shrinker_map on appropriate NUMA node

The shrinker_map may be touched from any cpu (e.g., a bit there may be set
by a task running everywhere) but kswapd is always bound to specific node.
So allocate shrinker_map from the related NUMA node to respect its NUMA
locality.  Also, this follows generic way we use for allocation of memcg's
per-node data.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/fff0e636-4c36-ed10-281c-8cdb0687c839@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, memcg: fix build error around the usage of kmem_caches
Yafang Shao [Thu, 2 Apr 2020 04:06:30 +0000 (21:06 -0700)]
mm, memcg: fix build error around the usage of kmem_caches

When I manually set default n to MEMCG_KMEM in init/Kconfig, bellow error
occurs,

  mm/slab_common.c: In function 'memcg_slab_start':
  mm/slab_common.c:1530:30: error: 'struct mem_cgroup' has no member named
  'kmem_caches'
    return seq_list_start(&memcg->kmem_caches, *pos);
                                ^
  mm/slab_common.c: In function 'memcg_slab_next':
  mm/slab_common.c:1537:32: error: 'struct mem_cgroup' has no member named
  'kmem_caches'
    return seq_list_next(p, &memcg->kmem_caches, pos);
                                  ^
  mm/slab_common.c: In function 'memcg_slab_show':
  mm/slab_common.c:1551:16: error: 'struct mem_cgroup' has no member named
  'kmem_caches'
    if (p == memcg->kmem_caches.next)
                  ^
    CC      arch/x86/xen/smp.o
  mm/slab_common.c: In function 'memcg_slab_start':
  mm/slab_common.c:1531:1: warning: control reaches end of non-void function
  [-Wreturn-type]
   }
   ^
  mm/slab_common.c: In function 'memcg_slab_next':
  mm/slab_common.c:1538:1: warning: control reaches end of non-void function
  [-Wreturn-type]
   }
   ^

That's because kmem_caches is defined only when CONFIG_MEMCG_KMEM is set,
while memcg_slab_start() will use it no matter CONFIG_MEMCG_KMEM is defined
or not.

By the way, the reason I mannuly undefined CONFIG_MEMCG_KMEM is to verify
whether my some other code change is still stable when CONFIG_MEMCG_KMEM is
not set. Unfortunately, the existing code has been already unstable since
v4.11.

Fixes: bc2791f857e1 ("slab: link memcg kmem_caches on their associated memory cgroup")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/1580970260-2045-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/swap_state.c: use the same way to count page in [add_to|delete_from]_swap_cache
Wei Yang [Thu, 2 Apr 2020 04:06:26 +0000 (21:06 -0700)]
mm/swap_state.c: use the same way to count page in [add_to|delete_from]_swap_cache

add_to_swap_cache() and delete_from_swap_cache() are counterparts, while
currently they use different ways to count pages.

It doesn't break anything because we only have two sizes for PageAnon, but
this is confusing and not good practice.

This patch corrects it by making both functions use hpage_nr_pages().

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200315012920.2687-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: swap: use smp_mb__after_atomic() to order LRU bit set
Yang Shi [Thu, 2 Apr 2020 04:06:23 +0000 (21:06 -0700)]
mm: swap: use smp_mb__after_atomic() to order LRU bit set

Memory barrier is needed after setting LRU bit, but smp_mb() is too
strong.  Some architectures, i.e.  x86, imply memory barrier with atomic
operations, so replacing it with smp_mb__after_atomic() sounds better,
which is nop on strong ordered machines, and full memory barriers on
others.  With this change the vm-scalability cases would perform better on
x86, I saw total 6% improvement with this patch and previous inline fix.

The test data (lru-file-readtwice throughput) against v5.6-rc4:
mainline w/ inline fix w/ both (adding this)
150MB 154MB 159MB

Fixes: 9c4e6b1a7027 ("mm, mlock, vmscan: no more skipping pagevecs")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: http://lkml.kernel.org/r/1584500541-46817-2-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: swap: make page_evictable() inline
Yang Shi [Thu, 2 Apr 2020 04:06:20 +0000 (21:06 -0700)]
mm: swap: make page_evictable() inline

When backporting commit 9c4e6b1a7027 ("mm, mlock, vmscan: no more skipping
pagevecs") to our 4.9 kernel, our test bench noticed around 10% down with
a couple of vm-scalability's test cases (lru-file-readonce,
lru-file-readtwice and lru-file-mmap-read).  I didn't see that much down
on my VM (32c-64g-2nodes).  It might be caused by the test configuration,
which is 32c-256g with NUMA disabled and the tests were run in root memcg,
so the tests actually stress only one inactive and active lru.  It sounds
not very usual in mordern production environment.

That commit did two major changes:
1. Call page_evictable()
2. Use smp_mb to force the PG_lru set visible

It looks they contribute the most overhead.  The page_evictable() is a
function which does function prologue and epilogue, and that was used by
page reclaim path only.  However, lru add is a very hot path, so it sounds
better to make it inline.  However, it calls page_mapping() which is not
inlined either, but the disassemble shows it doesn't do push and pop
operations and it sounds not very straightforward to inline it.

Other than this, it sounds smp_mb() is not necessary for x86 since
SetPageLRU is atomic which enforces memory barrier already, replace it
with smp_mb__after_atomic() in the following patch.

With the two fixes applied, the tests can get back around 5% on that test
bench and get back normal on my VM.  Since the test bench configuration is
not that usual and I also saw around 6% up on the latest upstream, so it
sounds good enough IMHO.

The below is test data (lru-file-readtwice throughput) against the v5.6-rc4:
mainline w/ inline fix
          150MB            154MB

With this patch the throughput gets 2.67% up.  The data with using
smp_mb__after_atomic() is showed in the following patch.

Shakeel Butt did the below test:

On a real machine with limiting the 'dd' on a single node and reading 100
GiB sparse file (less than a single node).  Just ran a single instance to
not cause the lru lock contention.  The cmdline used is "dd if=file-100GiB
of=/dev/null bs=4k".  Ran the cmd 10 times with drop_caches in between and
measured the time it took.

Without patch: 56.64143 +- 0.672 sec

With patches: 56.10 +- 0.21 sec

[akpm@linux-foundation.org: move page_evictable() to internal.h]
Fixes: 9c4e6b1a7027 ("mm, mlock, vmscan: no more skipping pagevecs")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1584500541-46817-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/swap_slots.c: assign|reset cache slot by value directly
Wei Yang [Thu, 2 Apr 2020 04:06:16 +0000 (21:06 -0700)]
mm/swap_slots.c: assign|reset cache slot by value directly

Currently we use a tmp pointer, pentry, to transfer and reset swap cache
slot, which is a little redundant.  Swap cache slot stores the entry value
directly, assign and reset it by value would be straight forward.

Also this patch merges the else and if, since this is the only case we
refill and repeat swap cache.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200311055352.50574-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/swapfile: fix data races in try_to_unuse()
Qian Cai [Thu, 2 Apr 2020 04:06:13 +0000 (21:06 -0700)]
mm/swapfile: fix data races in try_to_unuse()

si->inuse_pages could be accessed concurrently as noticed by KCSAN,

 write to 0xffff98b00ebd04dc of 4 bytes by task 82262 on cpu 92:
  swap_range_free+0xbe/0x230
  swap_range_free at mm/swapfile.c:719
  swapcache_free_entries+0x1be/0x250
  free_swap_slot+0x1c8/0x220
  __swap_entry_free.constprop.19+0xa3/0xb0
  free_swap_and_cache+0x53/0xa0
  unmap_page_range+0x7e0/0x1ce0
  unmap_single_vma+0xcd/0x170
  unmap_vmas+0x18b/0x220
  exit_mmap+0xee/0x220
  mmput+0xe7/0x240
  do_exit+0x598/0xfd0
  do_group_exit+0x8b/0x180
  get_signal+0x293/0x13d0
  do_signal+0x37/0x5d0
  prepare_exit_to_usermode+0x1b7/0x2c0
  ret_from_intr+0x32/0x42

 read to 0xffff98b00ebd04dc of 4 bytes by task 82499 on cpu 46:
  try_to_unuse+0x86b/0xc80
  try_to_unuse at mm/swapfile.c:2185
  __x64_sys_swapoff+0x372/0xd40
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The plain reads in try_to_unuse() are outside si->lock critical section
which result in data races that could be dangerous to be used in a loop.
Fix them by adding READ_ONCE().

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/1582578903-29294-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/swap.c: not necessary to export __pagevec_lru_add()
Wei Yang [Thu, 2 Apr 2020 04:06:10 +0000 (21:06 -0700)]
mm/swap.c: not necessary to export __pagevec_lru_add()

__pagevec_lru_add() is only used in mm directory now.

Remove the export symbol.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200126011436.22979-1-richardw.yang@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/swapfile.c: fix comments for swapcache_prepare
Chen Wandun [Thu, 2 Apr 2020 04:06:07 +0000 (21:06 -0700)]
mm/swapfile.c: fix comments for swapcache_prepare

The -EEXIST returned by __swap_duplicate means there is a swap cache
instead -EBUSY

Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200212145754.27123-1-chenwandun@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: fix omission of check on FOLL_LONGTERM in gup fast path
Pingfan Liu [Thu, 2 Apr 2020 04:06:04 +0000 (21:06 -0700)]
mm/gup: fix omission of check on FOLL_LONGTERM in gup fast path

FOLL_LONGTERM is a special case of FOLL_PIN.  It suggests a pin which is
going to be given to hardware and can't move.  It would truncate CMA
permanently and should be excluded.

In gup slow path, where
__gup_longterm_locked->check_and_migrate_cma_pages() handles
FOLL_LONGTERM, but in fast path, there lacks such a check, which means a
possible leak of CMA page to longterm pinned.

Place a check in try_grab_compound_head() in the fast path to fix the
leak, and if FOLL_LONGTERM happens on CMA, it will fall back to slow path
to migrate the page.

Some note about the check: Huge page's subpages have the same migrate type
due to either allocation from a free_list[] or alloc_contig_range() with
param MIGRATE_MOVABLE.  So it is enough to check on a single subpage by
is_migrate_cma_page(subpage)

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/1584876733-17405-3-git-send-email-kernelfans@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: rename nr as nr_pinned in get_user_pages_fast()
Pingfan Liu [Thu, 2 Apr 2020 04:06:00 +0000 (21:06 -0700)]
mm/gup: rename nr as nr_pinned in get_user_pages_fast()

To better reflect the held state of pages and make code self-explaining,
rename nr as nr_pinned.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/1584876733-17405-2-git-send-email-kernelfans@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup/writeback: add callbacks for inaccessible pages
Claudio Imbrenda [Thu, 2 Apr 2020 04:05:56 +0000 (21:05 -0700)]
mm/gup/writeback: add callbacks for inaccessible pages

With the introduction of protected KVM guests on s390 there is now a
concept of inaccessible pages.  These pages need to be made accessible
before the host can access them.

While cpu accesses will trigger a fault that can be resolved, I/O accesses
will just fail.  We need to add a callback into architecture code for
places that will do I/O, namely when writeback is started or when a page
reference is taken.

This is not only to enable paging, file backing etc, it is also necessary
to protect the host against a malicious user space.  For example a bad
QEMU could simply start direct I/O on such protected memory.  We do not
want userspace to be able to trigger I/O errors and thus the logic is
"whenever somebody accesses that page (gup) or does I/O, make sure that
this page can be accessed".  When the guest tries to access that page we
will wait in the page fault handler for writeback to have finished and for
the page_ref to be the expected value.

On s390x the function is not supposed to fail, so it is ok to use a
WARN_ON on failure.  If we ever need some more finegrained handling we can
tackle this when we know the details.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200306132537.783769-3-imbrenda@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: dump_page(): additional diagnostics for huge pinned pages
John Hubbard [Thu, 2 Apr 2020 04:05:52 +0000 (21:05 -0700)]
mm: dump_page(): additional diagnostics for huge pinned pages

As part of pin_user_pages() and related API calls, pages are "dma-pinned".
For the case of compound pages of order > 1, the per-page accounting of
dma pins is accomplished via the 3rd struct page in the compound page.  In
order to support debugging of any pin_user_pages()- related problems,
enhance dump_page() so as to report the pin count in that case.

Documentation/core-api/pin_user_pages.rst is also updated accordingly.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-13-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: improve dump_page() for compound pages
Matthew Wilcox (Oracle) [Thu, 2 Apr 2020 04:05:49 +0000 (21:05 -0700)]
mm: improve dump_page() for compound pages

There was no protection against a corrupted struct page having an
implausible compound_head().  Sanity check that a compound page has a head
within reach of the maximum allocatable page (this will need to be
adjusted if one of the plans to allocate 1GB pages comes to fruition).  In
addition,

 - Print the mapping pointer using %p insted of %px.  The actual value of
   the pointer can be read out of the raw page dump and using %p gives a
   chance to correlate it with an earlier printk of the mapping pointer
 - Print the mapping pointer from the head page, not the tail page
   (the tail ->mapping pointer may be in use for other purposes, eg part
   of a list_head)
 - Print the order of the page for compound pages
 - Dump the raw head page as well as the raw page
 - Print the refcount from the head page, not the tail page

Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Co-developed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-12-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoselftests/vm: run_vmtests: invoke gup_benchmark with basic FOLL_PIN coverage
John Hubbard [Thu, 2 Apr 2020 04:05:45 +0000 (21:05 -0700)]
selftests/vm: run_vmtests: invoke gup_benchmark with basic FOLL_PIN coverage

It's good to have basic unit test coverage of the new FOLL_PIN behavior.
Fortunately, the gup_benchmark unit test is extremely fast (a few
milliseconds), so adding it the the run_vmtests suite is going to cause no
noticeable change in running time.

So, add two new invocations to run_vmtests:

1) Run gup_benchmark with normal get_user_pages().

2) Run gup_benchmark with pin_user_pages().  This is much like the
   first call, except that it sets FOLL_PIN.

Running these two in quick succession also provide a visual comparison of
the running times, which is convenient.

The new invocations are fairly early in the run_vmtests script, because
with test suites, it's usually preferable to put the shorter, faster tests
first, all other things being equal.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-11-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup_benchmark: support pin_user_pages() and related calls
John Hubbard [Thu, 2 Apr 2020 04:05:41 +0000 (21:05 -0700)]
mm/gup_benchmark: support pin_user_pages() and related calls

Up until now, gup_benchmark supported testing of the following kernel
functions:

* get_user_pages(): via the '-U' command line option
* get_user_pages_longterm(): via the '-L' command line option
* get_user_pages_fast(): as the default (no options required)

Add test coverage for the new corresponding pin_*() functions:

* pin_user_pages_fast(): via the '-a' command line option
* pin_user_pages():      via the '-b' command line option

Also, add an option for clarity: '-u' for what is now (still) the default
choice: get_user_pages_fast().

Also, for the commands that set FOLL_PIN, verify that the pages really are
dma-pinned, via the new is_dma_pinned() routine.  Those commands are:

    PIN_FAST_BENCHMARK     : calls pin_user_pages_fast()
    PIN_BENCHMARK          : calls pin_user_pages()

In between the calls to pin_*() and unpin_user_pages(), check each page:
if page_maybe_dma_pinned() returns false, then WARN and return.

Do this outside of the benchmark timestamps, so that it doesn't affect
reported times.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-10-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: /proc/vmstat: pin_user_pages (FOLL_PIN) reporting
John Hubbard [Thu, 2 Apr 2020 04:05:37 +0000 (21:05 -0700)]
mm/gup: /proc/vmstat: pin_user_pages (FOLL_PIN) reporting

Now that pages are "DMA-pinned" via pin_user_page*(), and unpinned via
unpin_user_pages*(), we need some visibility into whether all of this is
working correctly.

Add two new fields to /proc/vmstat:

    nr_foll_pin_acquired
    nr_foll_pin_released

These are documented in Documentation/core-api/pin_user_pages.rst.  They
represent the number of pages (since boot time) that have been pinned
("nr_foll_pin_acquired") and unpinned ("nr_foll_pin_released"), via
pin_user_pages*() and unpin_user_pages*().

In the absence of long-running DMA or RDMA operations that hold pages
pinned, the above two fields will normally be equal to each other.

Also: update Documentation/core-api/pin_user_pages.rst, to remove an
earlier (now confirmed untrue) claim about a performance problem with
/proc/vmstat.

Also: update Documentation/core-api/pin_user_pages.rst to rename the new
/proc/vmstat entries, to the names listed here.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-9-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: page->hpage_pinned_refcount: exact pin counts for huge pages
John Hubbard [Thu, 2 Apr 2020 04:05:33 +0000 (21:05 -0700)]
mm/gup: page->hpage_pinned_refcount: exact pin counts for huge pages

For huge pages (and in fact, any compound page), the GUP_PIN_COUNTING_BIAS
scheme tends to overflow too easily, each tail page increments the head
page->_refcount by GUP_PIN_COUNTING_BIAS (1024).  That limits the number
of huge pages that can be pinned.

This patch removes that limitation, by using an exact form of pin counting
for compound pages of order > 1.  The "order > 1" is required because this
approach uses the 3rd struct page in the compound page, and order 1
compound pages only have two pages, so that won't work there.

A new struct page field, hpage_pinned_refcount, has been added, replacing
a padding field in the union (so no new space is used).

This enhancement also has a useful side effect: huge pages and compound
pages (of order > 1) do not suffer from the "potential false positives"
problem that is discussed in the page_dma_pinned() comment block.  That is
because these compound pages have extra space for tracking things, so they
get exact pin counts instead of overloading page->_refcount.

Documentation/core-api/pin_user_pages.rst is updated accordingly.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-8-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: track FOLL_PIN pages
John Hubbard [Thu, 2 Apr 2020 04:05:29 +0000 (21:05 -0700)]
mm/gup: track FOLL_PIN pages

Add tracking of pages that were pinned via FOLL_PIN.  This tracking is
implemented via overloading of page->_refcount: pins are added by adding
GUP_PIN_COUNTING_BIAS (1024) to the refcount.  This provides a fuzzy
indication of pinning, and it can have false positives (and that's OK).
Please see the pre-existing Documentation/core-api/pin_user_pages.rst for
details.

As mentioned in pin_user_pages.rst, callers who effectively set FOLL_PIN
(typically via pin_user_pages*()) are required to ultimately free such
pages via unpin_user_page().

Please also note the limitation, discussed in pin_user_pages.rst under the
"TODO: for 1GB and larger huge pages" section.  (That limitation will be
removed in a following patch.)

The effect of a FOLL_PIN flag is similar to that of FOLL_GET, and may be
thought of as "FOLL_GET for DIO and/or RDMA use".

Pages that have been pinned via FOLL_PIN are identifiable via a new
function call:

   bool page_maybe_dma_pinned(struct page *page);

What to do in response to encountering such a page, is left to later
patchsets. There is discussion about this in [1], [2], [3], and [4].

This also changes a BUG_ON(), to a WARN_ON(), in follow_page_mask().

[1] Some slow progress on get_user_pages() (Apr 2, 2019):
    https://lwn.net/Articles/784574/
[2] DMA and get_user_pages() (LPC: Dec 12, 2018):
    https://lwn.net/Articles/774411/
[3] The trouble with get_user_pages() (Apr 30, 2018):
    https://lwn.net/Articles/753027/
[4] LWN kernel index: get_user_pages():
    https://lwn.net/Kernel/Index/#Memory_management-get_user_pages

[jhubbard@nvidia.com: add kerneldoc]
Link: http://lkml.kernel.org/r/20200307021157.235726-1-jhubbard@nvidia.com
[imbrenda@linux.ibm.com: if pin fails, we need to unpin, a simple put_page will not be enough]
Link: http://lkml.kernel.org/r/20200306132537.783769-2-imbrenda@linux.ibm.com
[akpm@linux-foundation.org: fix put_compound_head defined but not used]
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-7-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: require FOLL_GET for get_user_pages_fast()
John Hubbard [Thu, 2 Apr 2020 04:05:25 +0000 (21:05 -0700)]
mm/gup: require FOLL_GET for get_user_pages_fast()

Internal to mm/gup.c, require that get_user_pages_fast() and
__get_user_pages_fast() identify themselves, by setting FOLL_GET.  This is
required in order to be able to make decisions based on "FOLL_PIN, or
FOLL_GET, or both or neither are set", in upcoming patches.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-6-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: pass gup flags to two more routines
John Hubbard [Thu, 2 Apr 2020 04:05:22 +0000 (21:05 -0700)]
mm/gup: pass gup flags to two more routines

In preparation for an upcoming patch, send gup flags args to two more
routines: put_compound_head(), and undo_dev_pagemap().

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-5-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: introduce page_ref_sub_return()
John Hubbard [Thu, 2 Apr 2020 04:05:18 +0000 (21:05 -0700)]
mm: introduce page_ref_sub_return()

An upcoming patch requires subtracting a large chunk of refcounts from a
page, and checking what the resulting refcount is.  This is a little
different than the usual "check for zero refcount" that many of the page
ref functions already do.  However, it is similar to a few other routines
that (like this one) are generally useful for things such as 1-based
refcounting.

Add page_ref_sub_return(), that subtracts a chunk of refcounts atomically,
and returns an atomic snapshot of the result.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-4-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: pass a flags arg to __gup_device_* functions
John Hubbard [Thu, 2 Apr 2020 04:05:14 +0000 (21:05 -0700)]
mm/gup: pass a flags arg to __gup_device_* functions

A subsequent patch requires access to gup flags, so pass the flags
argument through to the __gup_device_* functions.

Also placate checkpatch.pl by shortening a nearby line.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-3-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/gup: split get_user_pages_remote() into two routines
John Hubbard [Thu, 2 Apr 2020 04:05:10 +0000 (21:05 -0700)]
mm/gup: split get_user_pages_remote() into two routines

Patch series "mm/gup: track FOLL_PIN pages", v6.

This activates tracking of FOLL_PIN pages.  This is in support of fixing
the get_user_pages()+DMA problem described in [1]-[4].

FOLL_PIN support is now in the main linux tree.  However, the patch to use
FOLL_PIN to track pages was *not* submitted, because Leon saw an RDMA test
suite failure that involved (I think) page refcount overflows when huge
pages were used.

This patch definitively solves that kind of overflow problem, by adding an
exact pincount, for compound pages (of order > 1), in the 3rd struct page
of a compound page.  If available, that form of pincounting is used,
instead of the GUP_PIN_COUNTING_BIAS approach.  Thanks again to Jan Kara
for that idea.

Other interesting changes:

* dump_page(): added one, or two new things to report for compound
  pages: head refcount (for all compound pages), and map_pincount (for
  compound pages of order > 1).

* Documentation/core-api/pin_user_pages.rst: removed the "TODO" for the
  huge page refcount upper limit problems, and added notes about how it
  works now.  Also added a note about the dump_page() enhancements.

* Added some comments in gup.c and mm.h, to explain that there are two
  ways to count pinned pages: exact (for compound pages of order > 1) and
  fuzzy (GUP_PIN_COUNTING_BIAS: for all other pages).

============================================================
General notes about the tracking patch:

This is a prerequisite to solving the problem of proper interactions
between file-backed pages, and [R]DMA activities, as discussed in [1],
[2], [3], [4] and in a remarkable number of email threads since about
2017.  :)

In contrast to earlier approaches, the page tracking can be incrementally
applied to the kernel call sites that, until now, have been simply calling
get_user_pages() ("gup").  In other words, opt-in by changing from this:

    get_user_pages() (sets FOLL_GET)
    put_page()

to this:
    pin_user_pages() (sets FOLL_PIN)
    unpin_user_page()

============================================================
Future steps:

* Convert more subsystems from get_user_pages() to pin_user_pages().
  The first probably needs to be bio/biovecs, because any filesystem
  testing is too difficult without those in place.

* Change VFS and filesystems to respond appropriately when encountering
  dma-pinned pages.

* Work with Ira and others to connect this all up with file system
  leases.

[1] Some slow progress on get_user_pages() (Apr 2, 2019):
    https://lwn.net/Articles/784574/

[2] DMA and get_user_pages() (LPC: Dec 12, 2018):
    https://lwn.net/Articles/774411/

[3] The trouble with get_user_pages() (Apr 30, 2018):
    https://lwn.net/Articles/753027/

[4] LWN kernel index: get_user_pages()
    https://lwn.net/Kernel/Index/#Memory_management-get_user_pages

This patch (of 12):

An upcoming patch requires reusing the implementation of
get_user_pages_remote().  Split up get_user_pages_remote() into an outer
routine that checks flags, and an implementation routine that will be
reused.  This makes subsequent changes much easier to understand.

There should be no change in behavior due to this patch.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/filemap.c: rewrite pagecache_get_page documentation
Matthew Wilcox (Oracle) [Thu, 2 Apr 2020 04:05:07 +0000 (21:05 -0700)]
mm/filemap.c: rewrite pagecache_get_page documentation

 - These were never called PCG flags; they've been called FGP flags since
   their introduction in 2014.
 - The FGP_FOR_MMAP flag was misleadingly documented as if it was an
   alternative to FGP_CREAT instead of an option to it.
 - Rename the 'offset' parameter to 'index'.
 - Capitalisation, formatting, rewording.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200318140253.6141-9-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/filemap.c: unexport find_get_entry
Matthew Wilcox (Oracle) [Thu, 2 Apr 2020 04:05:03 +0000 (21:05 -0700)]
mm/filemap.c: unexport find_get_entry

No in-tree users (proc, madvise, memcg, mincore) can be built as a module.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200318140253.6141-8-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/page-writeback.c: use VM_BUG_ON_PAGE in clear_page_dirty_for_io
Matthew Wilcox (Oracle) [Thu, 2 Apr 2020 04:05:00 +0000 (21:05 -0700)]
mm/page-writeback.c: use VM_BUG_ON_PAGE in clear_page_dirty_for_io

Dumping the page information in this circumstance helps for debugging.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200318140253.6141-7-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoinclude/linux/pagemap.h: rename arguments to find_subpage
Matthew Wilcox (Oracle) [Thu, 2 Apr 2020 04:04:57 +0000 (21:04 -0700)]
include/linux/pagemap.h: rename arguments to find_subpage

This isn't just a random struct page, it's known to be a head page, and
calling it head makes the function better self-documenting.  The pgoff_t
is less confusing if it's named index instead of offset.  Also add a
couple of comments to explain why we're doing various things.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20200318140253.6141-3-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/filemap.c: use vm_fault error code directly
Matthew Wilcox (Oracle) [Thu, 2 Apr 2020 04:04:53 +0000 (21:04 -0700)]
mm/filemap.c: use vm_fault error code directly

Use VM_FAULT_OOM instead of indirecting through vmf_error(-ENOMEM).

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200318140253.6141-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/filemap.c: remove unused argument from shrink_readahead_size_eio()
Souptick Joarder [Thu, 2 Apr 2020 04:04:50 +0000 (21:04 -0700)]
mm/filemap.c: remove unused argument from shrink_readahead_size_eio()

The first argument of shrink_readahead_size_eio() is not used.  Hence
remove it from the function definition and from all the callers.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1583868093-24342-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/filemap.c: clear page error before actual read
Xianting Tian [Thu, 2 Apr 2020 04:04:47 +0000 (21:04 -0700)]
mm/filemap.c: clear page error before actual read

Mount failure issue happens under the scenario: Application forked dozens
of threads to mount the same number of cramfs images separately in docker,
but several mounts failed with high probability.  Mount failed due to the
checking result of the page(read from the superblock of loop dev) is not
uptodate after wait_on_page_locked(page) returned in function cramfs_read:

   wait_on_page_locked(page);
   if (!PageUptodate(page)) {
      ...
   }

The reason of the checking result of the page not uptodate: systemd-udevd
read the loopX dev before mount, because the status of loopX is Lo_unbound
at this time, so loop_make_request directly trigger the calling of io_end
handler end_buffer_async_read, which called SetPageError(page).  So It
caused the page can't be set to uptodate in function
end_buffer_async_read:

   if(page_uptodate && !PageError(page)) {
      SetPageUptodate(page);
   }

Then mount operation is performed, it used the same page which is just
accessed by systemd-udevd above, Because this page is not uptodate, it
will launch a actual read via submit_bh, then wait on this page by calling
wait_on_page_locked(page).  When the I/O of the page done, io_end handler
end_buffer_async_read is called, because no one cleared the page
error(during the whole read path of mount), which is caused by
systemd-udevd reading, so this page is still in "PageError" status, which
can't be set to uptodate in function end_buffer_async_read, then caused
mount failure.

But sometimes mount succeed even through systemd-udeved read loopX dev
just before, The reason is systemd-udevd launched other loopX read just
between step 3.1 and 3.2, the steps as below:

1, loopX dev default status is Lo_unbound;
2, systemd-udved read loopX dev (page is set to PageError);
3, mount operation
   1) set loopX status to Lo_bound;
   ==>systemd-udevd read loopX dev<==
   2) read loopX dev(page has no error)
   3) mount succeed

As the loopX dev status is set to Lo_bound after step 3.1, so the other
loopX dev read by systemd-udevd will go through the whole I/O stack, part
of the call trace as below:

   SYS_read
      vfs_read
          do_sync_read
              blkdev_aio_read
                 generic_file_aio_read
                     do_generic_file_read:
                        ClearPageError(page);
                        mapping->a_ops->readpage(filp, page);

here, mapping->a_ops->readpage() is blkdev_readpage.  In latest kernel,
some function name changed, the call trace as below:

   blkdev_read_iter
      generic_file_read_iter
         generic_file_buffered_read:
            /*
             * A previous I/O error may have been due to temporary
             * failures, eg. mutipath errors.
             * Pg_error will be set again if readpage fails.
             */
            ClearPageError(page);
            /* Start the actual read. The read will unlock the page*/
            error=mapping->a_ops->readpage(flip, page);

We can see ClearPageError(page) is called before the actual read,
then the read in step 3.2 succeed.

This patch is to add the calling of ClearPageError just before the actual
read of read path of cramfs mount.  Without the patch, the call trace as
below when performing cramfs mount:

   do_mount
      cramfs_read
         cramfs_blkdev_read
            read_cache_page
               do_read_cache_page:
                  filler(data, page);
                  or
                  mapping->a_ops->readpage(data, page);

With the patch, the call trace as below when performing mount:

   do_mount
      cramfs_read
         cramfs_blkdev_read
            read_cache_page:
               do_read_cache_page:
                  ClearPageError(page); <== new add
                  filler(data, page);
                  or
                  mapping->a_ops->readpage(data, page);

With the patch, mount operation trigger the calling of
ClearPageError(page) before the actual read, the page has no error if no
additional page error happen when I/O done.

Signed-off-by: Xianting Tian <xianting_tian@126.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: <yubin@h3c.com>
Link: http://lkml.kernel.org/r/1583318844-22971-1-git-send-email-xianting_tian@126.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/page-writeback.c: write_cache_pages(): deduplicate identical checks
Mauricio Faria de Oliveira [Thu, 2 Apr 2020 04:04:43 +0000 (21:04 -0700)]
mm/page-writeback.c: write_cache_pages(): deduplicate identical checks

There used to be a 'retry' label in between the two (identical) checks
when first introduced in commit f446daaea9d4 ("mm: implement writeback
livelock avoidance using page tagging"), and later modified/updated in
commit 6e6938b6d313 ("writeback: introduce .tagged_writepages for the
WB_SYNC_NONE sync stage").

The label has been removed in commit 64081362e8ff ("mm/page-writeback.c:
fix range_cyclic writeback vs writepages deadlock"), and the (identical)
checks are now present / performed immediately one after another.

So, remove/deduplicate the latter check, moving tag_pages_for_writeback()
into the former check before the 'tag' variable assignment, so it's clear
that it's not used in this (similarly-named) function call but only later
in pagevec_lookup_range_tag().

Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Link: http://lkml.kernel.org/r/20200218221716.1648-1-mfo@canonical.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/filemap.c: don't bother dropping mmap_sem for zero size readahead
Jan Kara [Thu, 2 Apr 2020 04:04:40 +0000 (21:04 -0700)]
mm/filemap.c: don't bother dropping mmap_sem for zero size readahead

When handling a page fault, we drop mmap_sem to start async readahead so
that we don't block on IO submission with mmap_sem held.  However there's
no point to drop mmap_sem in case readahead is disabled.  Handle that case
to avoid pointless dropping of mmap_sem and retrying the fault.  This was
actually reported to block mlockall(MCL_CURRENT) indefinitely.

Fixes: 6b4c9f446981 ("filemap: drop the mmap_sem for all blocking operations")
Reported-by: Minchan Kim <minchan@kernel.org>
Reported-by: Robert Stupp <snazy@gmx.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Link: http://lkml.kernel.org/r/20200212101356.30759-1-jack@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/Makefile: disable KCSAN for kmemleak
Qian Cai [Thu, 2 Apr 2020 04:04:37 +0000 (21:04 -0700)]
mm/Makefile: disable KCSAN for kmemleak

Kmemleak could scan task stacks while plain writes happens to those stack
variables which could results in data races.  For example, in
sys_rt_sigaction and do_sigaction(), it could have plain writes in a
32-byte size.  Since the kmemleak does not care about the actual values of
a non-pointer and all do_sigaction() call sites only copy to stack
variables, just disable KCSAN for kmemleak to avoid annotating anything
outside Kmemleak just because Kmemleak scans everything.

Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: http://lkml.kernel.org/r/1583263716-25150-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/kmemleak.c: use address-of operator on section symbols
Nathan Chancellor [Thu, 2 Apr 2020 04:04:34 +0000 (21:04 -0700)]
mm/kmemleak.c: use address-of operator on section symbols

Clang warns:

  mm/kmemleak.c:1955:28: warning: array comparison always evaluates to a constant [-Wtautological-compare]
        if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
                                  ^
  mm/kmemleak.c:1955:60: warning: array comparison always evaluates to a constant [-Wtautological-compare]
        if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)

These are not true arrays, they are linker defined symbols, which are just
addresses.  Using the address of operator silences the warning and does
not change the resulting assembly with either clang/ld.lld or gcc/ld
(tested with diff + objdump -Dr).

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/895
Link: http://lkml.kernel.org/r/20200220051551.44000-1-natechancellor@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agorevert "topology: add support for node_to_mem_node() to determine the fallback node"
Vlastimil Babka [Thu, 2 Apr 2020 04:04:30 +0000 (21:04 -0700)]
revert "topology: add support for node_to_mem_node() to determine the fallback node"

This reverts commit ad2c8144418c6a81cefe65379fd47bbe8344cef2.

The function node_to_mem_node() was introduced by that commit for use in SLUB
on systems with memoryless nodes, but it turned out to be unreliable on some
architectures/configurations and a simpler solution exists than fixing it up.

Thus commit 0715e6c516f1 ("mm, slub: prevent kmalloc_node crashes and
memory leaks") removed the only user of node_to_mem_node() and we can
revert the commit that introduced the function.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com>
Cc: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20200320115533.9604-2-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoslub: relocate freelist pointer to middle of object
Kees Cook [Thu, 2 Apr 2020 04:04:27 +0000 (21:04 -0700)]
slub: relocate freelist pointer to middle of object

In a recent discussion[1] with Vitaly Nikolenko and Silvio Cesare, it
became clear that moving the freelist pointer away from the edge of
allocations would likely improve the overall defensive posture of the
inline freelist pointer.  My benchmarks show no meaningful change to
performance (they seem to show it being faster), so this looks like a
reasonable change to make.

Instead of having the freelist pointer at the very beginning of an
allocation (offset 0) or at the very end of an allocation (effectively
offset -sizeof(void *) from the next allocation), move it away from the
edges of the allocation and into the middle.  This provides some
protection against small-sized neighboring overflows (or underflows), for
which the freelist pointer is commonly the target.  (Large or well
controlled overwrites are much more likely to attack live object contents,
instead of attempting freelist corruption.)

The vaunted kernel build benchmark, across 5 runs. Before:

Mean: 250.05
Std Dev: 1.85

and after, which appears mysteriously faster:

Mean: 247.13
Std Dev: 0.76

Attempts at running "sysbench --test=memory" show the change to be well in
the noise (sysbench seems to be pretty unstable here -- it's not really
measuring allocation).

Hackbench is more allocation-heavy, and while the std dev is above the
difference, it looks like may manifest as an improvement as well:

20 runs of "hackbench -g 20 -l 1000", before:

Mean: 36.322
Std Dev: 0.577

and after:

Mean: 36.056
Std Dev: 0.598

[1] https://twitter.com/vnik5287/status/1235113523098685440

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Vitaly Nikolenko <vnik@duasynt.com>
Cc: Silvio Cesare <silvio.cesare@gmail.com>
Cc: Christoph Lameter <cl@linux.com>Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/202003051624.AAAC9AECC@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoslub: improve bit diffusion for freelist ptr obfuscation
Kees Cook [Thu, 2 Apr 2020 04:04:23 +0000 (21:04 -0700)]
slub: improve bit diffusion for freelist ptr obfuscation

Under CONFIG_SLAB_FREELIST_HARDENED=y, the obfuscation was relatively weak
in that the ptr and ptr address were usually so close that the first XOR
would result in an almost entirely 0-byte value[1], leaving most of the
"secret" number ultimately being stored after the third XOR.  A single
blind memory content exposure of the freelist was generally sufficient to
learn the secret.

Add a swab() call to mix bits a little more.  This is a cheap way (1
cycle) to make attacks need more than a single exposure to learn the
secret (or to know _where_ the exposure is in memory).

kmalloc-32 freelist walk, before:

ptr              ptr_addr            stored value      secret
ffff90c22e019020@ffff90c22e019000 is 86528eb656b3b5bd (86528eb656b3b59d)
ffff90c22e019040@ffff90c22e019020 is 86528eb656b3b5fd (86528eb656b3b59d)
ffff90c22e019060@ffff90c22e019040 is 86528eb656b3b5bd (86528eb656b3b59d)
ffff90c22e019080@ffff90c22e019060 is 86528eb656b3b57d (86528eb656b3b59d)
ffff90c22e0190a0@ffff90c22e019080 is 86528eb656b3b5bd (86528eb656b3b59d)
...

after:

ptr              ptr_addr            stored value      secret
ffff9eed6e019020@ffff9eed6e019000 is 793d1135d52cda42 (86528eb656b3b59d)
ffff9eed6e019040@ffff9eed6e019020 is 593d1135d52cda22 (86528eb656b3b59d)
ffff9eed6e019060@ffff9eed6e019040 is 393d1135d52cda02 (86528eb656b3b59d)
ffff9eed6e019080@ffff9eed6e019060 is 193d1135d52cdae2 (86528eb656b3b59d)
ffff9eed6e0190a0@ffff9eed6e019080 is f93d1135d52cdac2 (86528eb656b3b59d)

[1] https://blog.infosectcbr.com.au/2020/03/weaknesses-in-linux-kernel-heap.html

Fixes: 2482ddec670f ("mm: add SLUB free list pointer obfuscation")
Reported-by: Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/202003051623.AF4F8CB@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/slub.c: replace kmem_cache->cpu_partial with wrapped APIs
chenqiwu [Thu, 2 Apr 2020 04:04:19 +0000 (21:04 -0700)]
mm/slub.c: replace kmem_cache->cpu_partial with wrapped APIs

There are slub_cpu_partial() and slub_set_cpu_partial() APIs to wrap
kmem_cache->cpu_partial.  This patch will use the two APIs to replace
kmem_cache->cpu_partial in slub code.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/1582079562-17980-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/slub.c: replace cpu_slab->partial with wrapped APIs
chenqiwu [Thu, 2 Apr 2020 04:04:16 +0000 (21:04 -0700)]
mm/slub.c: replace cpu_slab->partial with wrapped APIs

There are slub_percpu_partial() and slub_set_percpu_partial() APIs to wrap
kmem_cache->cpu_partial.  This patch will use the two to replace
cpu_slab->partial in slub code.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/1581951895-3038-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agofs_parse: remove pr_notice() about each validation
Kees Cook [Thu, 2 Apr 2020 04:04:13 +0000 (21:04 -0700)]
fs_parse: remove pr_notice() about each validation

This notice fills my boot logs with scary-looking asterisks but doesn't
really tell me anything.  Let's just remove it; validation errors are
already reported separately, so this is just a redundant list of
filesystems.

$ dmesg | grep VALIDATE
[    0.306256] *** VALIDATE tmpfs ***
[    0.307422] *** VALIDATE proc ***
[    0.308355] *** VALIDATE cgroup ***
[    0.308741] *** VALIDATE cgroup2 ***
[    0.813256] *** VALIDATE bpf ***
[    0.815272] *** VALIDATE ramfs ***
[    0.815665] *** VALIDATE hugetlbfs ***
[    0.876970] *** VALIDATE nfs ***
[    0.877383] *** VALIDATE nfs4 ***

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/202003061617.A8835CAAF@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: use memalloc_nofs_save instead of memalloc_noio_save
Matthew Wilcox (Oracle) [Thu, 2 Apr 2020 04:04:09 +0000 (21:04 -0700)]
ocfs2: use memalloc_nofs_save instead of memalloc_noio_save

OCFS2 doesn't mind if memory reclaim makes I/Os happen; it just cares that
it won't be reentered, so it can use memalloc_nofs_save() instead of
memalloc_noio_save().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200326200214.1102-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: use scnprintf() for avoiding potential buffer overflow
Takashi Iwai [Thu, 2 Apr 2020 04:04:05 +0000 (21:04 -0700)]
ocfs2: use scnprintf() for avoiding potential buffer overflow

Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200311093516.25300-1-tiwai@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: roll back the reference count modification of the parent directory if an error...
wangjian [Thu, 2 Apr 2020 04:04:02 +0000 (21:04 -0700)]
ocfs2: roll back the reference count modification of the parent directory if an error occurs

Under some conditions, the directory cannot be deleted.  The specific
scenarios are as follows: (for example, /mnt/ocfs2 is the mount point)

1. Create the /mnt/ocfs2/p_dir directory.  At this time, the i_nlink
   corresponding to the inode of the /mnt/ocfs2/p_dir directory is equal
   to 2.

2. During the process of creating the /mnt/ocfs2/p_dir/s_dir
   directory, if the call to the inc_nlink function in ocfs2_mknod
   succeeds, the functions such as ocfs2_init_acl,
   ocfs2_init_security_set, and ocfs2_dentry_attach_lock fail.  At this
   time, the i_nlink corresponding to the inode of the /mnt/ocfs2/p_dir
   directory is equal to 3, but /mnt/ocfs2/p_dir/s_dir is not added to the
   /mnt/ocfs2/p_dir directory entry.

3. Delete the /mnt/ocfs2/p_dir directory (rm -rf /mnt/ocfs2/p_dir).
   At this time, it is found that the i_nlink corresponding to the inode
   corresponding to the /mnt/ocfs2/p_dir directory is equal to 3.
   Therefore, the /mnt/ocfs2/p_dir directory cannot be deleted.

Signed-off-by: Jian wang <wangjian161@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/a44f6666-bbc4-405e-0e6c-0f4e922eeef6@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: ocfs2_fs.h: replace zero-length array with flexible-array member
Gustavo A. R. Silva [Thu, 2 Apr 2020 04:03:58 +0000 (21:03 -0700)]
ocfs2: ocfs2_fs.h: replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied.  As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!OKPotRhYhHbCG2kibo8Q6_6CuKaa28d_74h1svxyR6rbshrK2L_BdrQpNbvJWBWb40QCkg$
[2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!OKPotRhYhHbCG2kibo8Q6_6CuKaa28d_74h1svxyR6rbshrK2L_BdrQpNbvJWBUhNn9M6g$
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200309202155.GA8432@embeddedor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: dlm: replace zero-length array with flexible-array member
Gustavo A. R. Silva [Thu, 2 Apr 2020 04:03:55 +0000 (21:03 -0700)]
ocfs2: dlm: replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied.  As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!OVOYL_CouISa5L1Lw-20EEFQntw6cKMx-j8UdY4z78uYgzKBUFcfpn50GaurvbV5v7YiUA$
[2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!OVOYL_CouISa5L1Lw-20EEFQntw6cKMx-j8UdY4z78uYgzKBUFcfpn50GaurvbXs8Eh8eg$
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200309202016.GA8210@embeddedor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: cluster: replace zero-length array with flexible-array member
Gustavo A. R. Silva [Thu, 2 Apr 2020 04:03:52 +0000 (21:03 -0700)]
ocfs2: cluster: replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied.  As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!NzMr-YRl2zy-K3lwLVVatz7x0uD2z7-ykQag4GrGigxmfWU8TWzDy6xrkTiW3hYl00czlw$
[2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!NzMr-YRl2zy-K3lwLVVatz7x0uD2z7-ykQag4GrGigxmfWU8TWzDy6xrkTiW3hYHG1nAnw$
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200309201907.GA8005@embeddedor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: replace zero-length array with flexible-array member
Gustavo A. R. Silva [Thu, 2 Apr 2020 04:03:48 +0000 (21:03 -0700)]
ocfs2: replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied.  As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200213160244.GA6088@embeddedor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: add missing annotations for ocfs2_refcount_cache_lock() and ocfs2_refcount_cac...
Jules Irenge [Thu, 2 Apr 2020 04:03:45 +0000 (21:03 -0700)]
ocfs2: add missing annotations for ocfs2_refcount_cache_lock() and ocfs2_refcount_cache_unlock()

Sparse reports warnings at ocfs2_refcount_cache_lock()
and ocfs2_refcount_cache_unlock()

warning: context imbalance in ocfs2_refcount_cache_lock()
- wrong count at exit
warning: context imbalance in ocfs2_refcount_cache_unlock()
- unexpected unlock

The root cause is the missing annotation at ocfs2_refcount_cache_lock()
and at ocfs2_refcount_cache_unlock()

Add the missing __acquires(&rf->rf_lock) annotation to
ocfs2_refcount_cache_lock()

Add the missing __releases(&rf->rf_lock) annotation to
ocfs2_refcount_cache_unlock()

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200224204130.18178-1-jbi.octave@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: remove useless err
Alex Shi [Thu, 2 Apr 2020 04:03:41 +0000 (21:03 -0700)]
ocfs2: remove useless err

We don't need 'err' in these 2 places, better to remove them.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: ChenGang <cg.chen@huawei.com>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1579577836-251879-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: correct annotation from "l_next_rec" to "l_next_free_rec"
wangyan [Thu, 2 Apr 2020 04:03:38 +0000 (21:03 -0700)]
ocfs2: correct annotation from "l_next_rec" to "l_next_free_rec"

Correct annotation from "l_next_rec" to "l_next_free_rec"

Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Link: http://lkml.kernel.org/r/5e76c953-3479-1280-023c-ad05e4c75608@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: there is no need to log twice in several functions
wangyan [Thu, 2 Apr 2020 04:03:35 +0000 (21:03 -0700)]
ocfs2: there is no need to log twice in several functions

There is no need to log twice in several functions.

Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Link: http://lkml.kernel.org/r/77eec86a-f634-5b98-4f7d-0cd15185a37b@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: remove dlm_lock_is_remote
Alex Shi [Thu, 2 Apr 2020 04:03:31 +0000 (21:03 -0700)]
ocfs2: remove dlm_lock_is_remote

This macro has been unused since it was introduced.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/1579578203-254451-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: use OCFS2_SEC_BITS in macro
Alex Shi [Thu, 2 Apr 2020 04:03:28 +0000 (21:03 -0700)]
ocfs2: use OCFS2_SEC_BITS in macro

This macro should be used.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/1579577840-251956-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: remove unused macros
Alex Shi [Thu, 2 Apr 2020 04:03:25 +0000 (21:03 -0700)]
ocfs2: remove unused macros

O2HB_DEFAULT_BLOCK_BITS/DLM_THREAD_MAX_ASTS/DLM_MIGRATION_RETRY_MS and
OCFS2_MAX_RESV_WINDOW_BITS/OCFS2_MIN_RESV_WINDOW_BITS have been unused
since commit 66effd3c6812 ("ocfs2/dlm: Do not migrate resource to a node
that is leaving the domain").

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: ChenGang <cg.chen@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/1579577827-251796-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: remove FS_OCFS2_NM
Alex Shi [Thu, 2 Apr 2020 04:03:21 +0000 (21:03 -0700)]
ocfs2: remove FS_OCFS2_NM

This macro is unused since commit ab09203e302b ("sysctl fs: Remove dead
binary sysctl support").

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/1579577812-251572-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoscripts/spelling.txt: add more spellings to spelling.txt
Colin Ian King [Thu, 2 Apr 2020 04:03:18 +0000 (21:03 -0700)]
scripts/spelling.txt: add more spellings to spelling.txt

Here are some of the more common spelling mistakes and typos that I've
found while fixing up spelling mistakes in the kernel since November 2019

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200313174946.228216-1-colin.king@canonical.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoscripts/spelling.txt: add syfs/sysfs pattern
Jonathan Neuschäfer [Thu, 2 Apr 2020 04:03:15 +0000 (21:03 -0700)]
scripts/spelling.txt: add syfs/sysfs pattern

There are a few cases in the tree where "sysfs" is misspelled as "syfs".

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.ne>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Xiong <xndchn@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Chris Paterson <chris.paterson2@renesas.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Link: http://lkml.kernel.org/r/20200218152010.27349-1-j.neuschaefer@gmx.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoasm-generic: make more kernel-space headers mandatory
Masahiro Yamada [Thu, 2 Apr 2020 04:03:12 +0000 (21:03 -0700)]
asm-generic: make more kernel-space headers mandatory

Change a header to mandatory-y if both of the following are met:

[1] At least one architecture (except um) specifies it as generic-y in
    arch/*/include/asm/Kbuild

[2] Every architecture (except um) either has its own implementation
    (arch/*/include/asm/*.h) or specifies it as generic-y in
    arch/*/include/asm/Kbuild

This commit was generated by the following shell script.

----------------------------------->8-----------------------------------

arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d')

tmpfile=$(mktemp)

grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile

find arch -path 'arch/*/include/asm/Kbuild' |
xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u |
while read header
do
mandatory=yes

for arch in $arches
do
if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild &&
! [ -f arch/$arch/include/asm/$header ]; then
mandatory=no
break
fi
done

if [ "$mandatory" = yes ]; then
echo "mandatory-y += $header" >> $tmpfile

for arch in $arches
do
sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild
done
fi

done

sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild

LANG=C sort $tmpfile >> include/asm-generic/Kbuild

----------------------------------->8-----------------------------------

One obvious benefit is the diff stat:

 25 files changed, 52 insertions(+), 557 deletions(-)

It is tedious to list generic-y for each arch that needs it.

So, mandatory-y works like a fallback default (by just wrapping
asm-generic one) when arch does not have a specific header
implementation.

See the following commits:

def3f7cefe4e81c296090e1722a76551142c227c
a1b39bae16a62ce4aae02d958224f19316d98b24

It is tedious to convert headers one by one, so I processed by a shell
script.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/20200210175452.5030-1-masahiroy@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agokthread: mark timer used by delayed kthread works as IRQ safe
Petr Mladek [Thu, 2 Apr 2020 04:02:28 +0000 (21:02 -0700)]
kthread: mark timer used by delayed kthread works as IRQ safe

The timer used by delayed kthread works are IRQ safe because the used
kthread_delayed_work_timer_fn() is IRQ safe.

It is properly marked when initialized by KTHREAD_DELAYED_WORK_INIT().
But TIMER_IRQSAFE flag is missing when initialized by
kthread_init_delayed_work().

The missing flag might trigger invalid warning from del_timer_sync() when
kthread_mod_delayed_work() is called with interrupts disabled.

This patch is result of a discussion about using the API, see
https://lkml.kernel.org/r/cfa886ad-e3b7-c0d2-3ff8-58d94170eab5@ti.com

Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200217120709.1974-1-pmladek@suse.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agotools/accounting/getdelays.c: fix netlink attribute length
David Ahern [Thu, 2 Apr 2020 04:02:25 +0000 (21:02 -0700)]
tools/accounting/getdelays.c: fix netlink attribute length

A recent change to the netlink code: 6e237d099fac ("netlink: Relax attr
validation for fixed length types") logs a warning when programs send
messages with invalid attributes (e.g., wrong length for a u32).  Yafang
reported this error message for tools/accounting/getdelays.c.

send_cmd() is wrongly adding 1 to the attribute length.  As noted in
include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload
length, so drop the +1.

Fixes: 9e06d3f9f6b1 ("per task delay accounting taskstats interface: documentation fix")
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agox86: get rid of 'errret' argument to __get_user_xyz() macross
Linus Torvalds [Wed, 1 Apr 2020 01:23:47 +0000 (18:23 -0700)]
x86: get rid of 'errret' argument to __get_user_xyz() macross

Every remaining user just has the error case returning -EFAULT.

In fact, the exception was __get_user_asm_nozero(), which was removed in
commit 4b842e4e25b1 ("x86: get rid of small constant size cases in
raw_copy_{to,from}_user()"), and the other __get_user_xyz() macros just
followed suit for consistency.

Fix up some macro whitespace while at it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agox86: remove __put_user_asm() infrastructure
Linus Torvalds [Wed, 1 Apr 2020 01:11:18 +0000 (18:11 -0700)]
x86: remove __put_user_asm() infrastructure

The last user was removed by commit 4b842e4e25b1 ("x86: get rid of small
constant size cases in raw_copy_{to,from}_user()").  Get rid of the
left-overs before somebody tries to use it again.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Linus Torvalds [Wed, 1 Apr 2020 00:29:33 +0000 (17:29 -0700)]
Merge git://git./linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Fix the iwlwifi regression, from Johannes Berg.

   2) Support BSS coloring and 802.11 encapsulation offloading in
      hardware, from John Crispin.

   3) Fix some potential Spectre issues in qtnfmac, from Sergey
      Matyukevich.

   4) Add TTL decrement action to openvswitch, from Matteo Croce.

   5) Allow paralleization through flow_action setup by not taking the
      RTNL mutex, from Vlad Buslov.

   6) A lot of zero-length array to flexible-array conversions, from
      Gustavo A. R. Silva.

   7) Align XDP statistics names across several drivers for consistency,
      from Lorenzo Bianconi.

   8) Add various pieces of infrastructure for offloading conntrack, and
      make use of it in mlx5 driver, from Paul Blakey.

   9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

  10) Lots of parallelization improvements during configuration changes
      in mlxsw driver, from Ido Schimmel.

  11) Add support to devlink for generic packet traps, which report
      packets dropped during ACL processing. And use them in mlxsw
      driver. From Jiri Pirko.

  12) Support bcmgenet on ACPI, from Jeremy Linton.

  13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
      Starovoitov, and your's truly.

  14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

  15) Fix sysfs permissions when network devices change namespaces, from
      Christian Brauner.

  16) Add a flags element to ethtool_ops so that drivers can more simply
      indicate which coalescing parameters they actually support, and
      therefore the generic layer can validate the user's ethtool
      request. Use this in all drivers, from Jakub Kicinski.

  17) Offload FIFO qdisc in mlxsw, from Petr Machata.

  18) Support UDP sockets in sockmap, from Lorenz Bauer.

  19) Fix stretch ACK bugs in several TCP congestion control modules,
      from Pengcheng Yang.

  20) Support virtual functiosn in octeontx2 driver, from Tomasz
      Duszynski.

  21) Add region operations for devlink and use it in ice driver to dump
      NVM contents, from Jacob Keller.

  22) Add support for hw offload of MACSEC, from Antoine Tenart.

  23) Add support for BPF programs that can be attached to LSM hooks,
      from KP Singh.

  24) Support for multiple paths, path managers, and counters in MPTCP.
      From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
      and others.

  25) More progress on adding the netlink interface to ethtool, from
      Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
  net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
  cxgb4/chcr: nic-tls stats in ethtool
  net: dsa: fix oops while probing Marvell DSA switches
  net/bpfilter: remove superfluous testing message
  net: macb: Fix handling of fixed-link node
  net: dsa: ksz: Select KSZ protocol tag
  netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
  net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
  net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
  net: stmmac: create dwmac-intel.c to contain all Intel platform
  net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
  net: dsa: bcm_sf2: Add support for matching VLAN TCI
  net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
  net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
  net: dsa: bcm_sf2: Disable learning for ASP port
  net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
  net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
  net: dsa: b53: Restore VLAN entries upon (re)configuration
  net: dsa: bcm_sf2: Fix overflow checks
  hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
  ...

4 years agoMerge tag 'ntb-5.7' of git://github.com/jonmason/ntb
Linus Torvalds [Tue, 31 Mar 2020 23:50:25 +0000 (16:50 -0700)]
Merge tag 'ntb-5.7' of git://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "Bug fixes for a few printing issues, link status detection bug on AMD
  hardware, and a DMA address issue with ntb_perf.

  Also, large series of AMD NTB patches"

* tag 'ntb-5.7' of git://github.com/jonmason/ntb: (21 commits)
  NTB: add pci shutdown handler for AMD NTB
  NTB: send DB event when driver is loaded or un-loaded
  NTB: remove redundant setting of DB valid mask
  NTB: return link up status correctly for PRI and SEC
  NTB: add helper functions to set and clear sideinfo
  NTB: move ntb_ctrl handling to init and deinit
  NTB: handle link up, D0 and D3 events correctly
  NTB: handle link down event correctly
  NTB: remove handling of peer_sta from amd_link_is_up
  NTB: set peer_sta within event handler itself
  NTB: return the side info status from amd_poll_link
  NTB: define a new function to get link status
  NTB: Enable link up and down event notification
  NTB: clear interrupt status register
  NTB: Fix access to link status and control register
  MAINTAINERS: update maintainer list for AMD NTB driver
  NTB: ntb_transport: Use scnprintf() for avoiding potential buffer overflow
  ntb_hw_switchtec: Fix ntb_mw_clear_trans error if size == 0
  ntb_tool: Fix printk format
  NTB: ntb_perf: Fix address err in perf_copy_chunk
  ...

4 years agoMerge tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform...
Linus Torvalds [Tue, 31 Mar 2020 23:43:40 +0000 (16:43 -0700)]
Merge tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - Fix for improper handling of fan_boost_mode in sysfs for ASUS
   laptops.

 - On newer ASUS laptops the 1st battery is named differently, here is a
   fix.

 - Fix Lex 2I385SW to allow both network cards to be used.

 - The power integrated circuit driver for Surface 3 has been added.

 - Refactor and clean up of Intel PMC driver and enable it on Intel
   Jasper Lake.

 - Clean up of Dell RBU driver.

 - Big update for Intel Speed Select technology support tool and driver.

* tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits)
  platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler()
  platform/x86: surface3_power: Fix Kconfig section ordering
  platform/x86: surface3_power: Add missed headers
  platform/x86: surface3_power: Reformat GUID assignment
  platform/x86: surface3_power: Drop useless macro ACPI_PTR()
  platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3
  platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner
  platform/x86: surface3_power: Use dev_err() instead of pr_err()
  platform/x86: surface3_power: Drop unused structure definition
  platform/x86: surface3_power: MSHW0011 rev-eng implementation
  platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic
  platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states
  tools/power/x86/intel-speed-select: Fix a typo in error message
  tools/power/x86/intel-speed-select: Update version
  tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json
  tools/power/x86/intel-speed-select: Add display for enabled cpus count
  tools/power/x86/intel-speed-select: Print friendly warning for bad command line
  tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature
  tools/power/x86/intel-speed-select: Improve CLX commands
  tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options
  ...

4 years agoMerge tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Tue, 31 Mar 2020 23:18:55 +0000 (16:18 -0700)]
Merge tag 'tty-5.7-rc1' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big set of TTY / Serial patches for 5.7-rc1

  Lots of console fixups and reworking in here, serial core tweaks
  (doesn't that ever get old, why are we still creating new serial
  devices?), serial driver updates, line-protocol driver updates, and
  some vt cleanups and fixes included in here as well.

  All have been in linux-next with no reported issues"

* tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits)
  serial: 8250: Optimize irq enable after console write
  serial: 8250: Fix rs485 delay after console write
  vt: vt_ioctl: fix use-after-free in vt_in_use()
  vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
  tty: serial: make SERIAL_SPRD depend on COMMON_CLK
  tty: serial: fsl_lpuart: fix return value checking
  tty: serial: fsl_lpuart: move dma_request_chan()
  ARM: dts: tango4: Make /serial compatible with ns16550a
  ARM: dts: mmp*: Make the serial ports compatible with xscale-uart
  ARM: dts: mmp*: Fix serial port names
  ARM: dts: mmp2-brownstone: Don't redeclare phandle references
  ARM: dts: pxa*: Make the serial ports compatible with xscale-uart
  ARM: dts: pxa*: Fix serial port names
  ARM: dts: pxa*: Don't redeclare phandle references
  serial: omap: drop unused dt-bindings header
  serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs
  serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA
  serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info
  serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete()
  serial: 8250: 8250_omap: Account for data in flight during DMA teardown
  ...

4 years agoMerge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Tue, 31 Mar 2020 23:13:09 +0000 (16:13 -0700)]
Merge tag 'mmc-v5.7' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...

4 years agoMerge tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy...
Linus Torvalds [Tue, 31 Mar 2020 23:03:39 +0000 (16:03 -0700)]
Merge tag 'kbuild-v5.7' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:
 "Build system:

   - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
     fixed set of export symbols for Generic Kernel Image (GKI)

   - allow to run 'make dt_binding_check' without .config

   - use full schema for checking DT examples in *.yaml files

   - make modpost fail for missing MODULE_IMPORT_NS(), which makes more
     sense because we know the produced modules are never loadable

   - Remove unused 'AS' variable

  Kconfig:

   - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
     files

   - relax the 'imply' behavior so that symbols implied by 'y' can
     become 'm'

   - make 'imply' obey 'depends on' in order to make 'imply' really weak

  Misc:

   - add documentation on building the kernel with Clang/LLVM

   - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()

   - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n

   - various script and Makefile cleanups"

* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  Makefile: Update kselftest help information
  kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
  kbuild: add outputmakefile to no-dot-config-targets
  kbuild: remove AS variable
  net: wan: wanxl: refactor the firmware rebuild rule
  net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
  net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
  kbuild: add comment about grouped target
  kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
  kconfig: remove unused variable in qconf.cc
  sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
  kbuild: refactor Makefile.dtbinst more
  kbuild: compute the dtbs_install destination more simply
  Makefile: disallow data races on gcc-10 as well
  kconfig: make 'imply' obey the direct dependency
  kconfig: allow symbols implied by y to become m
  net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
  modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
  modpost: rework and consolidate logging interface
  kbuild: allow to run dt_binding_check without kernel configuration
  ...

4 years agoMerge branch 'next-general' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 31 Mar 2020 22:49:51 +0000 (15:49 -0700)]
Merge branch 'next-general' of git://git./linux/kernel/git/jmorris/linux-security

Pull security subsystem updates from James Morris:
 "Two minor updates for the core security subsystem:

   - kernel-doc warning fixes from Randy Dunlap

   - header cleanup from YueHaibing"

* 'next-general' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: remove duplicated include from security.h
  security: <linux/lsm_hooks.h>: fix all kernel-doc warnings

4 years agoMerge tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 31 Mar 2020 22:07:55 +0000 (15:07 -0700)]
Merge tag 'selinux-pr-20200330' of git://git./linux/kernel/git/pcmoore/selinux

Pull SELinux updates from Paul Moore:
 "We've got twenty SELinux patches for the v5.7 merge window, the
  highlights are below:

   - Deprecate setting /sys/fs/selinux/checkreqprot to 1.

     This flag was originally created to deal with legacy userspace and
     the READ_IMPLIES_EXEC personality flag. We changed the default from
     1 to 0 back in Linux v4.4 and now we are taking the next step of
     deprecating it, at some point in the future we will take the final
     step of rejecting 1.

   - Allow kernfs symlinks to inherit the SELinux label of the parent
     directory. In order to preserve backwards compatibility this is
     protected by the genfs_seclabel_symlinks SELinux policy capability.

   - Optimize how we store filename transitions in the kernel, resulting
     in some significant improvements to policy load times.

   - Do a better job calculating our internal hash table sizes which
     resulted in additional policy load improvements and likely general
     SELinux performance improvements as well.

   - Remove the unused initial SIDs (labels) and improve how we handle
     initial SIDs.

   - Enable per-file labeling for the bpf filesystem.

   - Ensure that we properly label NFS v4.2 filesystems to avoid a
     temporary unlabeled condition.

   - Add some missing XFS quota command types to the SELinux quota
     access controls.

   - Fix a problem where we were not updating the seq_file position
     index correctly in selinuxfs.

   - We consolidate some duplicated code into helper functions.

   - A number of list to array conversions.

   - Update Stephen Smalley's email address in MAINTAINERS"

* tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: clean up indentation issue with assignment statement
  NFS: Ensure security label is set for root inode
  MAINTAINERS: Update my email address
  selinux: avtab_init() and cond_policydb_init() return void
  selinux: clean up error path in policydb_init()
  selinux: remove unused initial SIDs and improve handling
  selinux: reduce the use of hard-coded hash sizes
  selinux: Add xfs quota command types
  selinux: optimize storage of filename transitions
  selinux: factor out loop body from filename_trans_read()
  security: selinux: allow per-file labeling for bpffs
  selinux: generalize evaluate_cond_node()
  selinux: convert cond_expr to array
  selinux: convert cond_av_list to array
  selinux: convert cond_list to array
  selinux: sel_avc_get_stat_idx should increase position index
  selinux: allow kernfs symlinks to inherit parent directory context
  selinux: simplify evaluate_cond_node()
  Documentation,selinux: deprecate setting checkreqprot to 1
  selinux: move status variables out of selinux_ss

4 years agoMerge tag 'audit-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoor...
Linus Torvalds [Tue, 31 Mar 2020 22:04:17 +0000 (15:04 -0700)]
Merge tag 'audit-pr-20200330' of git://git./linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "We've got two audit patches for the v5.7 merge window with a stellar
  14 lines changed between the two patches. The patch descriptions are
  far more lengthy than the patches themselves, which is a very good
  thing for patches this size IMHO. The patches pass our test suites and
  a quick summary is below:

   - Stop logging inode information when updating an audit file watch.

     Since we are not changing the inode, or the fact that we are
     watching the associated file, the inode information is just noise
     that we can do without.

   - Fix a problem where mandatory audit records were missing their
     accompanying audit records (e.g. SYSCALL records were missing).

     The missing records often meant that we didn't have the necessary
     context to understand what was going on when the event occurred"

* tag 'audit-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: trigger accompanying records when no rules present
  audit: CONFIG_CHANGE don't log internal bookkeeping as an event

4 years agoMerge tag '5.7-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Tue, 31 Mar 2020 21:30:10 +0000 (14:30 -0700)]
Merge tag '5.7-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs updates from Steve French:
 "First part of cifs/smb3 changes for merge window (others are still
  being tested). Various RDMA (smbdirect) fixes, addition of SMB3.1.1
  POSIX support in readdir, 3 fixes for stable, and a fix for flock.

  Summary:

  New feature:
   - SMB3.1.1 POSIX support in readdir

  Fixes:
   - various RDMA (smbdirect) fixes
   - fix for flock
   - fallocate fix
   - some improved mount warnings
   - two timestamp related fixes
   - reconnect fix
   - three fixes for stable"

* tag '5.7-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (28 commits)
  cifs: update internal module version number
  cifs: Allocate encryption header through kmalloc
  cifs: smbd: Check and extend sender credits in interrupt context
  cifs: smbd: Calculate the correct maximum packet size for segmented SMBDirect send/receive
  smb3: use SMB2_SIGNATURE_SIZE define
  CIFS: Fix bug which the return value by asynchronous read is error
  CIFS: check new file size when extending file by fallocate
  SMB3: Minor cleanup of protocol definitions
  SMB3: Additional compression structures
  SMB3: Add new compression flags
  cifs: smb2pdu.h: Replace zero-length array with flexible-array member
  cifs: clear PF_MEMALLOC before exiting demultiplex thread
  cifs: cifspdu.h: Replace zero-length array with flexible-array member
  CIFS: Warn less noisily on default mount
  fs/cifs: fix gcc warning in sid_to_id
  cifs: allow unlock flock and OFD lock across fork
  cifs: do d_move in rename
  cifs: add SMB2_open() arg to return POSIX data
  cifs: plumb smb2 POSIX dir enumeration
  cifs: add smb2 POSIX info level
  ...

4 years agoMerge tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux...
Linus Torvalds [Tue, 31 Mar 2020 21:16:03 +0000 (14:16 -0700)]
Merge tag 'gfs2-for-5.7' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updates from Bob Peterson:
 "We've got a lot of patches (39) for this merge window. Most of these
  patches are related to corruption that occurs when journals are
  replayed. For example:

   1. A node fails while writing to the file system.
   2. Other nodes use the metadata that was once used by the failed
      node.
   3. When the node returns to the cluster, its journal is replayed, but
      the older metadata blocks overwrite the changes from step 2.

  Summary:

   - Fixed the recovery sequence to prevent corruption during journal
     replay.

   - Many bug fixes found during recovery testing.

   - New improved file system withdraw sequence.

   - Fixed how resource group buffers are managed.

   - Fixed how metadata revokes are tracked and written.

   - Improve processing of IO errors hit by daemons like logd and
     quotad.

   - Improved error checking in metadata writes.

   - Fixed how qadata quota data structures are managed"

* tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (39 commits)
  gfs2: Fix oversight in gfs2_ail1_flush
  gfs2: change from write to read lock for sd_log_flush_lock in journal replay
  gfs2: instrumentation wrt ail1 stuck
  gfs2: don't lock sd_log_flush_lock in try_rgrp_unlink
  gfs2: Remove unnecessary gfs2_qa_{get,put} pairs
  gfs2: Split gfs2_rsqa_delete into gfs2_rs_delete and gfs2_qa_put
  gfs2: Change inode qa_data to allow multiple users
  gfs2: eliminate gfs2_rsqa_alloc in favor of gfs2_qa_alloc
  gfs2: Switch to list_{first,last}_entry
  gfs2: Clean up inode initialization and teardown
  gfs2: Additional information when gfs2_ail1_flush withdraws
  gfs2: leaf_dealloc needs to allocate one more revoke
  gfs2: allow journal replay to hold sd_log_flush_lock
  gfs2: don't allow releasepage to free bd still used for revokes
  gfs2: flesh out delayed withdraw for gfs2_log_flush
  gfs2: Do proper error checking for go_sync family of glops functions
  gfs2: Don't demote a glock until its revokes are written
  gfs2: drain the ail2 list after io errors
  gfs2: Withdraw in gfs2_ail1_flush if write_cache_pages fails
  gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty
  ...

4 years agoMerge tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Linus Torvalds [Tue, 31 Mar 2020 20:00:16 +0000 (13:00 -0700)]
Merge tag 'for-5.7-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
 "A number of core changes that make things work better in general, code
  is simpler and cleaner.

  Core changes:

   - per-inode file extent tree, for in memory tracking of contiguous
     extent ranges to make sure i_size adjustments are accurate

   - tree root structures are protected by reference counts, replacing
     SRCU that did not cover some cases

   - leak detector for tree root structures

   - per-transaction pinned extent tracking

   - buffer heads are replaced by bios for super block access

   - speedup of extent back reference resolution, on an example test
     scenario the runtime of send went down from a hour to minutes

   - factor out locking scheme used for subvolume writer and NOCOW
     exclusion, abstracted as DREW lock, double reader-writer exclusion
     (allow either readers or writers)

   - cleanup and abstract extent allocation policies, preparation for
     zoned device support

   - make reflink/clone_range work on inline extents

   - add more cancellation point for relocation, improves long response
     from 'balance cancel'

   - add page migration callback for data pages

   - switch to guid for uuids, with additional cleanups of the interface

   - make ranged full fsyncs more efficient

   - removal of obsolete ioctl flag BTRFS_SUBVOL_CREATE_ASYNC

   - remove b-tree readahead from delayed refs paths, avoiding seek and
     read unnecessary blocks

  Features:

   - v2 of ioctl to delete subvolumes, allowing to delete by id and more
     future extensions

  Fixes:

   - fix qgroup rescan worker that could block umount

   - fix crash during unmount due to race with delayed inode workers

   - fix dellaloc flushing logic that could create unnecessary chunks
     under heavy load

   - fix missing file extent item for hole after ranged fsync

   - several fixes in relocation error handling

  Other:

   - more documentation of relocation, device replace, space
     reservations

   - many random cleanups"

* tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (210 commits)
  btrfs: fix missing semaphore unlock in btrfs_sync_file
  btrfs: use nofs allocations for running delayed items
  btrfs: sysfs: Use scnprintf() instead of snprintf()
  btrfs: do not resolve backrefs for roots that are being deleted
  btrfs: track reloc roots based on their commit root bytenr
  btrfs: restart relocate_tree_blocks properly
  btrfs: reloc: reorder reservation before root selection
  btrfs: do not readahead in build_backref_tree
  btrfs: do not use readahead for running delayed refs
  btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot
  btrfs: Remove transid argument from btrfs_ioctl_snap_create_transid
  btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support
  btrfs: kill the subvol_srcu
  btrfs: make btrfs_cleanup_fs_roots use the radix tree lock
  btrfs: don't take an extra root ref at allocation time
  btrfs: hold a ref on the root on the dead roots list
  btrfs: make inodes hold a ref on their roots
  btrfs: move the root freeing stuff into btrfs_put_root
  btrfs: move ino_cache_inode dropping out of btrfs_free_fs_root
  btrfs: make the extent buffer leak check per fs info
  ...

4 years agoMerge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Linus Torvalds [Tue, 31 Mar 2020 19:58:36 +0000 (12:58 -0700)]
Merge tag 'fscrypt-for-linus' of git://git./fs/fscrypt/fscrypt

Pull fscrypt updates from Eric Biggers:
 "Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves a file's
  encryption nonce.

  This makes it easier to write automated tests which verify that
  fscrypt is doing the encryption correctly"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE
  f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE
  ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE
  fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl

4 years agoMerge branch 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 31 Mar 2020 19:09:51 +0000 (12:09 -0700)]
Merge branch 'x86-vmware-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 vmware updates from Ingo Molnar:
 "The main change in this tree is the addition of 'steal time clock
  support' for VMware guests"

* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vmware: Use bool type for vmw_sched_clock
  x86/vmware: Enable steal time accounting
  x86/vmware: Add steal time clock support for VMware guests
  x86/vmware: Remove vmware_sched_clock_setup()
  x86/vmware: Make vmware_select_hypercall() __init

4 years agoMerge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 31 Mar 2020 18:51:05 +0000 (11:51 -0700)]
Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 mm updates from Ingo Molnar:
 "A handful of changes:

   - two memory encryption related fixes

   - don't display the kernel's virtual memory layout plaintext on
     32-bit kernels either

   - two simplifications"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove the now redundant N_MEMORY check
  dma-mapping: Fix dma_pgprot() for unencrypted coherent pages
  x86: Don't let pgprot_modify() change the page encryption bit
  x86/mm/kmmio: Use this_cpu_ptr() instead get_cpu_var() for kmmio_ctx
  x86/mm/init/32: Stop printing the virtual memory layout

4 years agoMerge branch 'x86-misc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 31 Mar 2020 18:30:45 +0000 (11:30 -0700)]
Merge branch 'x86-misc-for-linus' of git://git./linux/kernel/git/tip/tip

Pull misc x86 updates from Ingo Molnar:

 - extend the decoder maps with CET instructions

 - fix !vDSO corner cases

* 'x86-misc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/tests: Add CET instructions to the new instructions test
  x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
  selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault
  selftests/x86/vdso: Fix no-vDSO segfaults

4 years agoMerge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 31 Mar 2020 18:26:22 +0000 (11:26 -0700)]
Merge branch 'x86-fpu-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fpu updates from Ingo Molnar:
 "Misc changes:

   - add a pkey sanity check

   - three commits to improve and future-proof xstate/xfeature handling
     some more"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkeys: Add check for pkey "overflow"
  x86/fpu/xstate: Warn when checking alignment of disabled xfeatures
  x86/fpu/xstate: Fix XSAVES offsets in setup_xstate_comp()
  x86/fpu/xstate: Fix last_good_offset in setup_xstate_features()

4 years agoMerge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 31 Mar 2020 18:04:05 +0000 (11:04 -0700)]
Merge branch 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 cleanups from Ingo Molnar:
 "This topic tree contains more commits than usual:

   - most of it are uaccess cleanups/reorganization by Al

   - there's a bunch of prototype declaration (--Wmissing-prototypes)
     cleanups

   - misc other cleanups all around the map"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  x86/mm/set_memory: Fix -Wmissing-prototypes warnings
  x86/efi: Add a prototype for efi_arch_mem_reserve()
  x86/mm: Mark setup_emu2phys_nid() static
  x86/jump_label: Move 'inline' keyword placement
  x86/platform/uv: Add a missing prototype for uv_bau_message_interrupt()
  kill uaccess_try()
  x86: unsafe_put-style macro for sigmask
  x86: x32_setup_rt_frame(): consolidate uaccess areas
  x86: __setup_rt_frame(): consolidate uaccess areas
  x86: __setup_frame(): consolidate uaccess areas
  x86: setup_sigcontext(): list user_access_{begin,end}() into callers
  x86: get rid of put_user_try in __setup_rt_frame() (both 32bit and 64bit)
  x86: ia32_setup_rt_frame(): consolidate uaccess areas
  x86: ia32_setup_frame(): consolidate uaccess areas
  x86: ia32_setup_sigcontext(): lift user_access_{begin,end}() into the callers
  x86/alternatives: Mark text_poke_loc_init() static
  x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()
  x86/mm: Drop pud_mknotpresent()
  x86: Replace setup_irq() by request_irq()
  x86/configs: Slightly reduce defconfigs
  ...