Refresh patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Refresh config.mk

Remove some unused symbols and add some new symbols.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Add IFF_DONT_BRIDGE definition to compat

The IFF_DONT_BRIDGE flag will not be interpreted by an old kernel, but
it does not hurt the kernel if it is set but not read by the non
wireless network code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

driver-selet: clarify why we have select_ath9k_driver

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

driver-select: remove double disable_var_01 for ath9k

The other disable_var_01 was being called when we called
select_ath_driver on the switch statement for ath9k.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

driver-select: fix enabling debugging for ath9k and ath5k

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

config.mk: add support for CONFIG_ATH9K_COMMON

For now this is under PCI but later on once we add ath9k_htc
we'll need to move this under a bus agnostic area.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update hunk offset for patches

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Don't build SSB modules when SSB isn't present

If you're building for a platform that has (for example) no SSB,
then having a single knob to turn to disable this is a major
win.  Especially if more devices get add later that are SSB-based.

Signed-off-by: Philip A Prindeville <philipp@redfish-solutions.com>

Add symbol CONFIG_RT2800_LIB

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

refresh patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Fix two warnings

This fixes these two warnings:
drivers/net/wireless/ath/ath5k/base.c:202: warning: ‘ath5k_pci_suspend_compat’ defined but not used
drivers/net/wireless/ath/ath5k/base.c:216: warning: ‘ath5k_pci_resume_compat’ defined but not used

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Fix build problem, missing get_unaligned_le16

This patch fixes the "implicit declaration of function
'get_unaligned_le16'" in drivers/net/wireless/libertas/assoc.c

CC: philipp_subx@redfish-solutions.com
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Fixes a pm patch for ath5k

Signed-off-by: Felix Bitterli <ic.felix@gmail.com>

Fix drivers/net/wireless/Makefile patch

This was failing due to the move of some old drivers
to staging.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update patch hunk offsets

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

09-threaded-irq.patch: update hunk offsets

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

rename ieee80211_rx

Rename ieee80211_rx to avoild conflicts with the export done by older
libipw. libipw in kernel 2.6.32 and older also exports a symbol named
ieee80211_rx. If libipw from normal kernel and mac80211 from
compat-wireless is loaded you will get an conflict.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

config.mk: add ath debug to config.mk but leave it commented out

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Remove Modules.marker file on make clean

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6.32.h: cast const'd 4th argument on wireless_send_event()

2.6.32 constified the 4th argument to wireless_send_event(), we can
avoid these pesky warning by casting for older kernels.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6.27: move include for iw_handler on the top

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Shut up compiler on compiling mac80211 for unused variable

We can avoid this compiler warning by using the used variable
on the if (0) branch as that is never going to happen anyway.

  CC [M]  /home/mcgrof/devel/compat-wireless-2.6/net/wireless/scan.o
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/scan.c: In function ‘cfg80211_bss_update’:
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/scan.c:422: warning: unused variable ‘used’

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add skb_add_rx_frag to backport.

This is needed by iwl-3945.c.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

refresh patch hunk offsets

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

b44 fix

encapsulate $ in bash script

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Fix build with kernel < 2.6.27

iw_handler.h have changed in kernel 2.6.27.
For older kernel we need some extra backport code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Remove temporary fix

Remove temporary fix from 6dae19ce42f4f6424a37c25f9ec393c1b4bc5c32
it is now in John's tree

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Fix compile bug with kernel 2.6.32

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Move trace headers

Move tracepoint headers into own patch file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Remove unused code

LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) can not be true in
compat-2.6.28.h. The definitions are not needed in compat-wireless any
more. Removing this does not break compiling with mainline kernel 2.6.25
to 2.6.32

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Export round_jiffies_up again.

The 2.6.27 mainline kernel does not export round_jiffies_up. It looks
like the openSuse kernel 2.6.27 does export this symbol. Rename the
compat symbol to not conflict with the openSuse kernel.

CC: larry.finger@gmail.com
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Fix driver select for ath9k

All other atheros drivers were being built

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

driver-select: respect disabling b44

This was busted after we started using the drivers/net/Makefile to
select b44, and it was *always* enabled.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6: uncomment out the wiphy_type on older kernels

Kernels >= 2.6.32 can identify the type of device netdevice
so that sysfs can be used to get this. We never really had a
systematic way of doing this -- now we do through the
SET_NETDEV_DEVTYPE() macro. For older kernels we make the
SET_NETDEV_DEVTYPE() be a no-op this means the wireless type
we define is unused so we ucomment it simply to avoid a
compile warning.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix driver-select for ath9k and ath5k

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

01-netdev.patch: temporary fix for libertas/main.c

We'll remove this once John merges my patch.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add 13-trace.patch for skipping a trace header

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

12-iw_handler-changes.patch: cast to struct ieee80211_device *

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6: add 12-iw_handler-changes.patch

This accounts for changes on the iw_handler.h

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6: fix 11-dev-pm-ops.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6: stop shipping bleeding edge iw_handler.h

We should be using the old kernel's header instead.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6: adding ethtool.h to compat-2.6.31.h

Between 2.6.30 and 2.6.31, linux/netdevice.h started
to include linux/ethtool.h (commit b1b67dd45a6b629eb41553856805aaa1614fbb83,
"net: factor out ethtool invocation of vlan/macvlan drivers"),
and commit 7508e486965b0af13984bc6d9da62a8d8f0dc5f9,
"cfg80211: add firmware and hardware version to wiphy", introduces
dependency of ETHTOOL_BUSINFO_LEN from linux/ethtool.h
to net/cfg80211.h .

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>

compat-2.6: backport dev_pm_ops stuff and SIMPLE_DEV_PM_OPS

The 2.6.29 kernel has new struct dev_pm_ops [1] which are used
on the pci device to distinguish power management hooks for suspend
to RAM and hibernation. Older kernels don't have these so we need
to resort back to the good ol' suspend/resume. Fortunately the calls
are not so different so it should be possible to resuse the same
calls on compat code with only slight modifications.

The SIMPLE_DEV_PM_OPS macro is used as a helper to make the regular
suspend/resume calls be linked to the equivalent hibernation calls
as that is the same behaviour in older kernels. We backport
SIMPLE_DEV_PM_OPS only for kernels 2.6.29..2.6.31 and for older
kernels this is a no-op.

[1] http://lxr.linux.no/#linux+v2.6.29/include/linux/pm.h#L170

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update hunk offsets for 09-threaded-irq.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update hunks offsets for libertas on 01-netdev.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6: adjusting 01-netdev.patch for libertas cfg80211 support

Adjusting the netdev patch slightly to cope with recent change
in libertas regarding cfg80211 support:

    commit 6c65edc7a3e9452509a898cc9bbc210b0121617f
    Author: Holger Schurig <hs4233@mail.mn-solutions.de>
    Date:   Tue Oct 6 16:31:54 2009 +0200

        libertas: first stab at cfg80211 support

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>

ath9k: use CONFIG_ATH9K_HW for driver select

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

ath9k: enable CONFIG_ATH9K_HW

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

config.mk: remove CONFIG_WEXT_* stuff

This should not be enabled by compat-wireless -- this is the
old wext stuff which is always built into the kernel. On newer
kernels (>= 2.6.33) these config options will already be provided
by your kernel.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

cfg80211: add wext handlers back to netdev for compat code

The patch "wext: refactor" by Johannes Berg refactored
wext code so that new kernels no longer get the wext
handlers through struct netdevice, instead they get
it through the struct wiphy which is cfg80211 specific.

For old kernels this means you get not wext handlers
anymore when backporting code, this adds the wext handler
back to the netdevice wireless_handlers to let compat
users use wext again.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update hunk offsets for 99-change-makefiles.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update hunk offsets for 09-threaded-irq.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update hunk offsets for 08-rename-iwl4965-config.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update hunk offsets for 03-rfkill.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update offsets for libertas for 01-netdev.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

config.mk: enable CONFIG_CFG80211_WEXT

Othwerise wext isn't enabled.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Make it compile with wireless-testing master-2009-09-30

DIV_ROUND_CLOSEST is needed by the b44 driver.
Most of the rest is needed because of "wext: refactor"
in wireless-testing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

admin-update: fix a print, use echo -e

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: Fix the bleeding-edge version to build on 2.6.27

When building the bleeding-edge compat-wireless for kernel 2.6.27,
several compilation errors were detected.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

compat-wireless: Fix b44 build issues.

Even though CONFIG_B44 is defined, there is no Makefile
created in drivers/net. This failure to build allows the
in-kernel version of b44 to get loaded with a compat-wireless
version of ssb.ko, never a good thing.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

Fix compilation against for 2.6.32 changes

2.6.32 added SET_NETDEV_DEVTYPE() and netdev_tx

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-2.6: adding driver-select script support for rtl818x

adding driver-select script support for rtl818x

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>

compat-2.6: adding notes on installing to non-running kernel

adding notes on installing to non-running kernel

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>

Add scripts/update-initramfs and use it

Some distributions may ship b44 and ssb on the initramfs for
netboot. To help with this we need to update the initrafms
for those distributions.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

fix build problems

IRQ_WAKE_THREAD is not defined in kernel < 2.6.30
in include/linux/irqreturn.h .

In 09-threaded-irq.patch the condition was wrong.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Update hunks for master-2009-09-23

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Backport threaded IRQ support using workqueues

b43 makes use this.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix rfkill led build on 2.6.30

Reported-by: Oleh Hello <oleh.hello@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Backport kmemleak support - do nothing for older kernels

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

readd netdev_ops backport to ipw2200.c

This fixes building of ipw2200.c for kernel < 2.6.29.
It was introduced in 203a12ff5a432e2ee4a83b38e698bff0dd4efead

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Update hunk offsets for compat patches

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add notes about rfkill and uping interfaces on rfkill patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update hunks offsets for master-2009-08-20

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Use /dev/rfkill instead of /dev/rfkill_backport

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Increase speed of compat-wireless build - CONFIG_COMPAT_WIRELESS_* changes

$(shell) calls are pretty expensive in makefiles, avoid so many
calls by doing them only once to set the CONFIG_COMPAT_WIRELESS_*
variables and then using these to check the kernel version later in
config.mk

This speeds up the compat-wireless build process.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Enable CONFIG_B43_PHY_LP=y

From the Kconfig:

  Support for the LP-PHY.
  The LP-PHY is a low-power PHY built into some notebooks
  and embedded devices. It supports 802.11a/g
  (802.11a support is optional, and currently disabled).

  This is heavily experimental

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Don't build PCMCIA modules when PCMCIA isn't present

If you're building for a platform that has (for example) no PCMCIA/
Cardbus, then having a single knob to turn to disable this is a
major win.  Especially if more devices get add later that are
PCMCIA-based.

Tested.

Signed-off-by: Philip A Prindeville <philipp@redfish-solutions.com>

Update patch offesets to apply cleanly

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Kalle's patch is now merged so we remove it

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add Kalle's pending patch to fix wireless-testing building on 2.6.27

We'll remove this once John merges his patch.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

pcmcia_parse_tuple was redefined in pcmcia/cistpl.h

fix build:
undef pcmcia_parse_tuple before redefine it again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Update comment on patch 04 for netns changes

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Move 09-rename-iwl4965-config.patch to 08

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

re-enable mac80211 mesh, Javier fixed it

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update iwlagn hunk offsets for 09-rename-iwl4965-config.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update mac80211/tx.c hunk offsets for 08-disable-mesh.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Updates rndis_wlan.c hunk offsets for compat/patches/01-netdev.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add CONFIG_COMPAT_WIRELESS_* kconfig like options

This lets us selectively compile backward compatibility
stuff instead of linking in empty object files in the end.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Clean up compat-2.6.26.c

The exported methods are not used.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Rename CONFIG_IWL4965 symbol

In kernel 2.6.26 and older CONFIG_IWL4965 was build as an extra
module, but now it is directly included in the iwlagn.

CONFIG_IWL4965 has to be set to y, to build correctly.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Remove wext building

wext can not be build as a module. We do not need to build it,
so remove it from the Makefile.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Add missing compat-2.6.*.c files

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Rename the rest of CONFIG_MAC80211_MESH to CONFIG_COMPAT_MAC80211_MESH

Without this, some symbols can not be resolved because only parts of mesh were disabled.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Some compilation fixes for 2.6.24 and 2.6.25

2.6.24 is still left disabled, we need to figure out a way to deal with
this still:

  CC      /home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.o
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c: In function ‘wireless_dev_seq_start’:
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:678: warning: statement with no effect
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:679: warning: ISO C90 forbids mixed declarations and code
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c: In function ‘wireless_dev_seq_next’:
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:695: warning: statement with no effect
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c: In function ‘seq_open_wireless’:
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:717: error: implicit declaration of function ‘seq_open_net’
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:718: error: invalid application of ‘sizeof’ to incomplete type ‘struct seq_net_private’
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c: At top level:
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:726: error: ‘seq_release_net’ undeclared here (not in a function)
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c: In function ‘wireless_nlevent_process’:
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:1339: warning: passing argument 2 of ‘rtnl_notify’ makes integer from pointer without a cast
include/linux/rtnetlink.h:618: note: expected ‘u32’ but argument is of type ‘struct net *’
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:1339: warning: passing argument 4 of ‘rtnl_notify’ makes pointer from integer without a cast
include/linux/rtnetlink.h:618: note: expected ‘struct nlmsghdr *’ but argument is of type ‘int’
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:1339: warning: passing argument 5 of ‘rtnl_notify’ makes integer from pointer without a cast
include/linux/rtnetlink.h:618: note: expected ‘gfp_t’ but argument is of type ‘void *’
/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.c:1339: error: too many arguments to function ‘rtnl_notify’
make[3]: *** [/home/mcgrof/devel/compat-wireless-2.6/net/wireless/wext.o] Error 1
make[2]: *** [/home/mcgrof/devel/compat-wireless-2.6/net/wireless] Error 2
make[1]: *** [_module_/home/mcgrof/devel/compat-wireless-2.6] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-24-generic'

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix compile against 2.6.25

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix compilation against 2.6.27

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Enable WL12XX drivers!

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix Makefile .. sorry

Whoopsie, on patch:

commit 0239a9e2a1a08b75b751ddcfe5d15ecfdf23c25a
Add intel and iwlwifi group drivers for driver-select

I made a mistake and left the result of driver-select
and committed it removing some essential stuff.

This adds it back.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add wl12xx group to driver-select (NOTE: android users)

wl12xx now has support for wl1251 for both SPI and
SDIO bus communication. On the android wl1251 is used
over SDIO.

The wl12xx group provides two modules:

  * wl1251 with SDIO and SPI support
  * wl1271

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>