Thomas Bogendoerfer [Sat, 24 Nov 2007 12:29:19 +0000 (13:29 +0100)]
SGISEEQ: use cached memory access to make driver work on IP28
SGI IP28 machines would need special treatment (enable adding addtional
wait states) when accessing memory uncached. To avoid this pain I changed
the driver to use only cached access to memory.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:58:25 +0000 (20:58 -0600)]
pasemi_mac: Don't enable RX/TX without a link (if possible)
pasemi_mac: Don't enable RX/TX without a link (if possible)
Don't enable RX/TX of packets until we have a link, since there's a chance
we'll just get RX frame errors, etc.
The case where we don't have a PHY we can't do much about: Just enable
it and deal with errors as they come in.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:58:06 +0000 (20:58 -0600)]
pasemi_mac: Print warning when not attaching to a PHY
pasemi_mac: Print warning when not attaching to a PHY
Print a warning on the console when not connecting to a phy for an interface.
It turns out to be a pretty common problem when someone gets the MDIO info
wrong in their device tree, resulting in the macs running at a fixed 1Gbit FD.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:57:56 +0000 (20:57 -0600)]
pasemi_mac: Remove SKB copy/recycle logic
pasemi_mac: Remove SKB copy/recycle logic
It doesn't really buy us much, since copying is about as expensive
as the allocation in the first place. Just remove it for now.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:57:45 +0000 (20:57 -0600)]
pasemi_mac: SKB unmap optimization
pasemi_mac: SKB unmap optimization
Avoid touching skb_shinfo() in the unmap path, since it turns out to
normally cause cache misses and delays. instead, save number of fragments
in the TX_RING_INFO structures since that's all that's needed anyway.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:57:27 +0000 (20:57 -0600)]
pasemi_mac: Software-based LRO support
pasemi_mac: Software-based LRO support
Implement LRO for pasemi_mac. Pretty straightforward.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:57:09 +0000 (20:57 -0600)]
pasemi_mac: Improve RX interrupt mitigation
pasemi_mac: Improve RX interrupt mitigation
Currently the receive side interrupts will go off on the reception of
a packet, NAPI will poll the ring and keep polling as long as there's
a decent amount of packets to receive.
This is less than optimal, especially for LRO where it's better if we
have a more substantial amount of packets to process at once, to get
the real LRO benefits.
So, set the count threshold to a higher value and use the timeout feature
that will give us an interrupt even if not enough packets have come in
to set off the count threshold.
FIXME: It'd be real nice to have ethtool support for users to tune this
at runtime.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:56:54 +0000 (20:56 -0600)]
pasemi_mac: Fix TX cleaning
pasemi_mac: Fix TX cleaning
This is a bit awkward. We don't have a timer-delayed interrupt on TX
complete, but we have a count threshold. So set that reasonably high
(32 packets), and schedule the NAPI poll when it goes off. Also bump a
regular timer that will take care of rotting packets for the last 1..31
ones in case we don't trigger a TX interrupt (and there's no RX activity
that would otherwise trigger the poll).
The longer-term fix is to separate TX from RX NAPI and do two separate
poll loops.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:56:41 +0000 (20:56 -0600)]
pasemi_mac: performance tweaks
pasemi_mac: performance tweaks
* Seems like we do better with a smaller RX ring, probably because chances of
still having the SKB cached are better
* Const-ify variables to get better code generation and fewer reloads
* Move prefetching around a little, and try to prefetch the whole SKB
* Set NETIF_F_HIGHDMA
* Misc other minor tweaks
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:56:32 +0000 (20:56 -0600)]
pasemi_mac: Convert to new dma library
pasemi_mac: Convert to new dma library
Convert the pasemi_mac driver to the new platform global DMA manaagement
library. This also does a couple of other minor cleanups w.r.t. channel
management.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:56:20 +0000 (20:56 -0600)]
pasemi: DMA engine management library
pasemi: DMA engine management library
Introduce a DMA management library to manage the various DMA resources
on the PA Semi SoCs. Since several drivers need to allocate these shared
resources, provide some abstractions as well as allocation/free functions
for channels, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:56:04 +0000 (20:56 -0600)]
pasemi_mac: Move register definitions to include/asm-powerpc
pasemi_mac: Move register definitions to include/asm-powerpc
Move the common register formats and descriptor layouts from
drivers/net/pasemi_mac.h to include/asm-poewrpc/pasemi_dma.h
Previously only the ethernet driver was using them, but other drivers
are coming up that will also use them, so it makes sense to share the
constants.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Thu, 29 Nov 2007 02:54:28 +0000 (20:54 -0600)]
pasemi_mac: RX/TX ring management cleanup
pasemi_mac: RX/TX ring management cleanup
Prepare a bit for supporting multiple TX queues by cleaning up some
of the ring management and shuffle things around a bit.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Stephen Hemminger [Wed, 28 Nov 2007 22:50:16 +0000 (14:50 -0800)]
sky2: rx allocation threshold change
When using larger MTU's sky2 driver changes from allocating one
data area, to using multiple pages. The threshold for this was based on
a heuristic where the cost of a single allocation is bigger than one
page. Since the allocator has changed, this heuristic is now incorrect;
instead just make the threshold be when the total size of the allocation
is greater than one page.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Stephen Hemminger [Wed, 28 Nov 2007 22:27:03 +0000 (14:27 -0800)]
sky2: align IP header on Rx if possible
The sky2 driver was not aligning the IP header on receive buffers.
This workaround is only needed on hardware with broken FIFO, newer chips
without FIFO can just DMA to unaligned address.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Francois Romieu [Wed, 28 Nov 2007 22:02:33 +0000 (23:02 +0100)]
r6040: cleanups
- whitespaces vs tabs
- use 80 cols
- use if_mii
- use netdev_priv
- remove useless cast to void *
- PCI device id does not need to be globally available
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Francois Romieu [Wed, 28 Nov 2007 21:55:36 +0000 (22:55 +0100)]
r6040: erroneous dev->priv
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Francois Romieu [Wed, 28 Nov 2007 21:31:00 +0000 (22:31 +0100)]
r6040: remove virt_to_bus
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Francois Romieu [Wed, 28 Nov 2007 20:36:22 +0000 (21:36 +0100)]
r6040: compile error
drivers/net/r6040.c: In function 'rx_buf_alloc':
drivers/net/r6040.c:262: warning: passing argument 2 of 'pci_map_single' makes pointer from integer without a cast
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Komuro [Sun, 11 Nov 2007 02:04:36 +0000 (11:04 +0900)]
axnet_cs: use spin_lock_irqsave instead of spin_lock + disable_irq
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Sat, 24 Nov 2007 02:59:45 +0000 (21:59 -0500)]
drivers/net/cxgb3: trim trailing whitespace
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Divy Le Ray [Fri, 16 Nov 2007 19:22:21 +0000 (11:22 -0800)]
cxgb3 - Fix I/O synchronization
Synchronize memory access before ringing
the Tx door bell.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Fri, 16 Nov 2007 19:22:16 +0000 (11:22 -0800)]
cxgb3 - HW set up updates
Disable PEX errors. The HW generates false positives.
Update RSS hash function to a symmetric algorithm.
Update T3C HW support
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Fri, 16 Nov 2007 19:22:10 +0000 (11:22 -0800)]
cxgb3 - sysfs methods clean up
Remove unused argument in sysfs methods
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Fri, 16 Nov 2007 19:22:05 +0000 (11:22 -0800)]
cxgb3 - fix interaction with pktgen
Do not use skb->cb to stash unmap info,
save the info to the descriptor state.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Fri, 16 Nov 2007 19:22:00 +0000 (11:22 -0800)]
cxgb3 - FW upgrade
Bump up FW version to 5.0.
Do not downgrade FW within the same major version range.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Fri, 16 Nov 2007 19:21:55 +0000 (11:21 -0800)]
cxgb3 - Add EEH support
Add PCI recovery support
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Fri, 16 Nov 2007 19:21:50 +0000 (11:21 -0800)]
cxgb3 - Fix resources release.
Remove sysfs entries before unregistering the net devices.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Fri, 16 Nov 2007 22:26:44 +0000 (14:26 -0800)]
cxgb3 - Use wild card for PCI subdevice ID match
Subdevice ID is not necessarily set to 1.
Use wild card for PCI device matching
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Fri, 16 Nov 2007 19:21:39 +0000 (11:21 -0800)]
cxgb3 - fix MSI-X failure path
Return error code when msi-x settings fail.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Sat, 24 Nov 2007 02:50:34 +0000 (21:50 -0500)]
[netdrvr] checkpatch cleanups
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jeff Garzik [Sat, 24 Nov 2007 02:50:20 +0000 (21:50 -0500)]
wireless: checkpatch cleanups
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jeff Garzik [Sat, 24 Nov 2007 02:49:27 +0000 (21:49 -0500)]
drivers/net/r6040: fix obvious problems (but more remain)
- checkpatch fixes
- fix bogus and uninitialized return codes in r6040_start_xmit()
- netdev_get_settings() fix obvious locking bug flagged by compiler warning
- set DMA consistent mask
- remove unnecessary setting of dev->base_addr
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jeff Garzik [Sat, 24 Nov 2007 02:23:36 +0000 (21:23 -0500)]
[netdrvr] netxen: checkpatch fixes (98% trim trailing whitespace)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Peter Korsgaard [Thu, 15 Nov 2007 10:10:12 +0000 (11:10 +0100)]
dm9601: Consolidate common parts of dm_write_*_async
dm_write_async and dm_write_reg_async are almost identical.
Move common functionality to dm_write_async_helper (saves ~256b).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Alan Cox [Mon, 19 Nov 2007 15:03:38 +0000 (15:03 +0000)]
slip: Drag kicking and screaming into coding style compliance
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Alan Cox [Mon, 19 Nov 2007 15:02:32 +0000 (15:02 +0000)]
3c501: Bring into compliance with the coding style
3c501 leads the way... 8)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Adrian Bunk [Wed, 21 Nov 2007 23:02:55 +0000 (15:02 -0800)]
drivers/net/chelsio/: #if 0 unused functions
This patch #if 0's the following unused functions:
- espi.c:t1_espi_set_misc_ctrl()
- sge.c:t1_sched_set_max_avail_bytes()
- sge.c:t1_sched_set_drain_bits_per_us()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Joe Perches [Tue, 20 Nov 2007 01:48:28 +0000 (17:48 -0800)]
drivers/net: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Joe Perches [Tue, 20 Nov 2007 01:48:25 +0000 (17:48 -0800)]
drivers/net/sk98lin: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Joe Perches [Tue, 20 Nov 2007 01:48:26 +0000 (17:48 -0800)]
drivers/net/wan: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Joe Perches [Tue, 20 Nov 2007 01:48:24 +0000 (17:48 -0800)]
drivers/net/netxen: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Joe Perches [Tue, 20 Nov 2007 01:48:23 +0000 (17:48 -0800)]
drivers/net/ixgb: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Joe Perches [Tue, 20 Nov 2007 01:48:22 +0000 (17:48 -0800)]
drivers/net/cxgb3: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Joe Perches [Tue, 20 Nov 2007 01:48:21 +0000 (17:48 -0800)]
drivers/net/chelsio: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Eliezer Tamir [Thu, 15 Nov 2007 18:09:02 +0000 (20:09 +0200)]
add bnx2x driver for BCM57710
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sreenivasa Honnur [Thu, 24 Jan 2008 09:45:43 +0000 (01:45 -0800)]
[S2IO]: Support for add/delete/store/restore ethernet addresses
- Support to add/delete/store/restore 64 and 128 Ethernet addresses for Xframe I and Xframe II respectively.
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Wed, 14 Nov 2007 04:54:59 +0000 (20:54 -0800)]
[E1000]: Secondary unicast address support
Add support for configuring secondary unicast addresses. Unicast
addresses take precendece over multicast addresses when filling
the exact address filters to avoid going to promiscous mode.
When more unicast addresses are present than filter slots,
unicast filtering is disabled and all slots can be used for
multicast addresses.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Wed, 14 Nov 2007 04:53:51 +0000 (20:53 -0800)]
[E1000E]: convert register test macros to functions
Add functions for reg_pattern_test and reg_set_and check
Changed macros to use these functions
Compiled x86, untested
Size decreased ~2K
old:
$ size drivers/net/e1000e/ethtool.o
text data bss dec hex filename
14461 0 0 14461 387d drivers/net/e1000e/ethtool.o
new:
$ size drivers/net/e1000e/ethtool.o
text data bss dec hex filename
12498 0 0 12498 30d2 drivers/net/e1000e/ethtool.o
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Wed, 14 Nov 2007 04:52:05 +0000 (20:52 -0800)]
[E1000]: Convert regtest macro's to functions
Minimal macro to function conversion in e1000_ethtool.c
Adds functions reg_pattern_test and reg_set_and_check
Changes REG_PATTERN_TEST and REG_SET_AND_CHECK macros
to call these functions.
Saves ~2.5KB
Compiled x86, untested (no hardware)
old:
$ size drivers/net/e1000/e1000_ethtool.o
text data bss dec hex filename
16778 0 0 16778 418a drivers/net/e1000/e1000_ethtool.o
new:
$ size drivers/net/e1000/e1000_ethtool.o
text data bss dec hex filename
14128 0 0 14128 3730 drivers/net/e1000/e1000_ethtool.o
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Auke Kok [Wed, 14 Nov 2007 04:49:15 +0000 (20:49 -0800)]
[E1000]: update netstats traffic counters realtime
formerly e1000/e1000e only updated traffic counters once every
2 seconds with the register values of bytes/packets. With newer
code however in the interrupt and polling code we can real-time
fill in these values in the netstats struct for users to see.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Auke Kok [Wed, 14 Nov 2007 04:48:36 +0000 (20:48 -0800)]
[E1000E]: update netstats traffic counters realtime
formerly e1000/e1000e only updated traffic counters once every
2 seconds with the register values of bytes/packets. With newer
code however in the interrupt and polling code we can real-time
fill in these values in the netstats struct for users to see.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jay Vosburgh [Wed, 14 Nov 2007 04:25:48 +0000 (20:25 -0800)]
[BONDING]: Documentation update
Update the bonding documentation: more discussion on
initialization and configuration, changes to discussion of packet
reordering in balance-rr, update some out of date information.
Based in part on input from Rick Jones <rick.jones2@hp.com>
and Andy Gospodarek <andy@greyhouse.net>.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sten Wang [Tue, 13 Nov 2007 05:31:11 +0000 (21:31 -0800)]
[NET]: Add support for the RDC R6040 Fast Ethernet controller
This patch adds support for the RDC R6040 MAC we can find in the RDC
R-321x System-on-chips.
Signed-off-by: Sten Wang <sten.wang@rdc.com.tw>
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
David Acker [Thu, 8 Nov 2007 18:17:41 +0000 (10:17 -0800)]
Fix e100 on systems that have cache incoherent DMA
On the systems that have cache incoherent DMA, including ARM, there
is a race condition between software allocating a new receive buffer
and hardware writing into a buffer. The two race on touching the last
Receive Frame Descriptor (RFD). It has its el-bit set and its next
link equal to 0. When hardware encounters this buffer it attempts to
write data to it and then update Status Word bits and Actual Count in
the RFD. At the same time software may try to clear the el-bit and
set the link address to a new buffer.
Since the entire RFD is once cache-line, the two write operations can
collide. This can lead to the receive unit stalling or interpreting
random memory as its receive area.
The fix is to set the el-bit on and the size to 0 on the next to last
buffer in the chain. When the hardware encounters this buffer it stops
and does not write to it at all. The hardware issues an RNR interrupt
with the receive unit in the No Resources state. Software can write
to the tail of the list because it knows hardware will stop on the
previous descriptor that was marked as the end of list.
Once it has a new next to last buffer prepared, it can clear the el-bit
and set the size on the previous one. The race on this buffer is safe
since the link already points to a valid next buffer and the software
can handle the race setting the size (assuming aligned 16 bit writes
are atomic with respect to the DMA read). If the hardware sees the
el-bit cleared without the size set, it will move on to the next buffer
and skip this one. If it sees the size set but the el-bit still set,
it will complete that buffer and then RNR interrupt and wait.
Signed-off-by: David Acker <dacker@roinet.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Francois Romieu [Thu, 1 Nov 2007 07:52:13 +0000 (00:52 -0700)]
sundance: SIOCDEVPRIVATE pollution
To quote one of my favorite contemporary author:
[include/linux/sockios.h]
* THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
*/
#define SIOCDEVPRIVATE 0x89F0 /* to 89FF */
[...]
Gentoo's snmpd trips up over this code when trying to figure if the driver
supports the non-SIOCDEVPRIVATE API or not. One can argue over its choice
of heuristic but there no reason to make ioctl more ugly than needed.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jesse Huang <jesse@icplus.com.tw>
Tested-by: Volker Sauer <vsauer@dvs.tu-darmstadt.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Adrian Bunk [Mon, 5 Nov 2007 17:07:31 +0000 (18:07 +0100)]
drivers/net/netxen/: cleanups
This patch contains the following cleanups:
- static functions in .c files shouldn't be marked inline
- make needlessly global code static
- #if 0 unused code
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Auke Kok [Wed, 31 Oct 2007 22:22:10 +0000 (15:22 -0700)]
ixgbe: Fix copper PHY initialization code
While cleaning up the internal API focussing on Fiber and CX4 code
we found that I had broken the copper PHY initialization code. This
patch restores the PHY-specific code. This is mostly uninteresting
since no copper PHY boards are yet available. The changes have been
tested against Fiber only as I do not even have copper PHY versions
of 82598 macs.
This change actually cleans up the API code a bit more and we
lose some initialization code. A few PHY link detection helper
lines of code have been snuck into this patch, as well as a
read flush where it was suspected that this might cause issues.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Auke Kok [Wed, 31 Oct 2007 22:22:05 +0000 (15:22 -0700)]
e1000/e1000e: Move PCI-Express device IDs over to e1000e
e1000e will from now on support the PCI-Express adapters that
previously were supported by e1000. This support means better
performance and easier debugging from now on for both the old
PCI-X/PCI hardware and PCI-Express adapters.
This patch also moves 3 recently merged device IDs over to e1000e
that are identical to quad-port versions of already existing
dual port versions. With this last bit every former e1000 pci-e
device should work now with e1000e.
Here is a brief list of which gigabit driver to use with which
adapter:
e1000:
82540 -> 82547
e1000e:
82571 -> 82573
ich8, ich9 (82562 or 82566)
es2lan (80003eslan)
igb: (not yet merged, only available from e1000.sf.net)
82575
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Auke Kok [Wed, 31 Oct 2007 22:22:00 +0000 (15:22 -0700)]
e1000e: Disable L1 ASPM power savings for 82573 mobile variants
L1 ASPM link (pci-e link power savings) has significant benefits
(~1W savings when link is active) but unfortunately does not work
correctly on any of the chipsets that have 82573 on mobile platforms
which causes various nuisances:
- eeprom reads return garbage information leading to bad eeprom
checksums
- long ping times (up to 2 seconds)
- complete system hangs (freeze/lockup)
A lot of T60 owners have been plagued by this, but other mobile
solutions also suffer from these symptoms.
Disabling L1 ASPM before we activate the PCI-E link fixes all of
these issues at the cost of some power consumption.
Remove a workaround RDTR adjustment that is no longer needed with
this new one.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Bill Hayes [Wed, 31 Oct 2007 22:21:52 +0000 (15:21 -0700)]
e1000e: alternate MAC address support
Port alternate MAC address support from the sourceforge
e1000 driver to the upstream e1000e driver.
Signed-off-by: Bill Hayes <bill.hayes@hp.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Mon, 5 Nov 2007 02:53:26 +0000 (21:53 -0500)]
[netdrvr] ibmlana: move away from legacy MCA API
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jeff Garzik [Mon, 5 Nov 2007 02:52:49 +0000 (21:52 -0500)]
[netdrvr] ibmlana: modularization cleanup
* move alloc_netdev() call, register_netdev() call, and associated failure
cleanup into ibmlana_probe()
* move per-net_device cleanup into ibmlana_remove_one()
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jeff Garzik [Mon, 29 Oct 2007 09:46:16 +0000 (05:46 -0400)]
[netdrvr] irq handler minor cleanups in several drivers
* use irq_handler_t where appropriate
* no need to use 'irq' function arg, its already stored in a data struct
* rename irq handler 'irq' argument to 'dummy', where the function
has been analyzed and proven not to use its first argument.
* remove always-false "dev_id == NULL" test from irq handlers
* remove pointless casts from void*
* declance: irq argument is not const
* add KERN_xxx printk prefix
* fix minor whitespace weirdness
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jeff Garzik [Mon, 29 Oct 2007 09:20:44 +0000 (05:20 -0400)]
hamradio/scc: kill unnecessary use of 'irq' function arg
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Alejandro Martinez Ruiz [Thu, 18 Oct 2007 08:22:02 +0000 (10:22 +0200)]
sk98lin: kill bogus check and convert to use ARRAY_SIZE()
This converts uses of ARRAY_SIZE(), and while at it also kills
unreachable code as far as I can say. I can't tell what was the author
trying to do with the following check. First we have:
PNMI_STATIC const SK_PNMI_STATADDR
StatAddr[SK_PNMI_MAX_IDX][SK_PNMI_MAC_TYPES];
and then a check goes like this:
if (SK_PNMI_MAX_IDX !=
(sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES)))
with the second line being just ARRAY_SIZE(StatAddr), which will always
return SK_PNMI_MAX_IDX, rendering the check useless.
Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Alejandro Martinez Ruiz [Thu, 18 Oct 2007 08:16:33 +0000 (10:16 +0200)]
netdev: ARRAY_SIZE() cleanups
Convert array size calculations to use ARRAY_SIZE().
Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Alejandro Martinez Ruiz [Thu, 18 Oct 2007 08:00:15 +0000 (10:00 +0200)]
netdev: use ARRAY_SIZE() instead of sizeof(array) / ETH_GSTRING_LEN
Using ARRAY_SIZE() on arrays of the form array[][K] makes it unnecessary
to know the value of K when checking its size.
Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Roel Kluin [Fri, 26 Oct 2007 19:51:26 +0000 (21:51 +0200)]
wireless: fix '!x & y' typo's
Fix priority mistakes similar to '!x & y'
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 26 Oct 2007 08:12:14 +0000 (10:12 +0200)]
libertas: move wlan_*_association_work from header to c file
Move wlan_postpone_association_work() and wlan_cancel_association_work()
from a assoc.h file to the sole user, into wext.c.
Renamed those two functions to to libertas_XXX as well.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jes Sorensen [Fri, 26 Oct 2007 14:10:39 +0000 (16:10 +0200)]
iwlwifi: disable interrupts before calling request_irq
Disable interrupts in the iwl4965 before calling request_irq() for
the case that the previous OS or the BIOS left a pending interrupt in
the chip. This behavior has been observed on some laptops such as T61
Thinkpads and Toshiba Portege R500
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dmitry Torokhov [Fri, 2 Nov 2007 05:55:36 +0000 (01:55 -0400)]
P54: use temporary variables to reduce size of generated code
When there are 2 linked structures, using a temporary variable to hold a pointer
to the often used structure usually produces better code (smaller and faster)
since compiler does not have to constantly re-fetch data from the first structure.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Matthias Kaehlcke [Mon, 5 Nov 2007 08:41:01 +0000 (09:41 +0100)]
Prism54: Convert mgmt_sem to the mutex API
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Thu, 11 Oct 2007 03:56:25 +0000 (23:56 -0400)]
orinoco: more reliable scan handling
Bring scan result handling more in line with drivers like ipw. Scan
results are aggregated and a BSS dropped after 15 seconds if no beacon
is received. This allows the driver to interact better with userspace
where more than one process may request scans or results at any time.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Buesch [Sun, 28 Oct 2007 15:29:32 +0000 (16:29 +0100)]
b43: consistent naming for ieee80211_ops
Use a consistent naming scheme for the ops.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Buesch [Sun, 28 Oct 2007 15:19:44 +0000 (16:19 +0100)]
b43: Use the retry limit parameters from mac80211
Use the limits provided by mac80211.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Buesch [Sun, 28 Oct 2007 14:59:58 +0000 (15:59 +0100)]
b43: Dereference of wl->current_dev must be protected by wl->mutex
Put all access to wl->current_dev under protection of the mutex.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Buesch [Sun, 28 Oct 2007 20:08:51 +0000 (21:08 +0100)]
b43legacy: Remove set_key callback
We don't need the set_key callback, as we don't do hw crypto.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 11 Oct 2007 05:05:57 +0000 (00:05 -0500)]
b43legacy: Rewrite pwork locking
Implement much easier and more lightweight locking for
the periodic work. This also removes the last big busywait
loop and replaces it by a sleeping loop.
This patch for b43legacy is patterned aftar the same patch
for b43 by Michael Buesch <mb@bu3sch.de>.
Signed-off-by: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 11 Oct 2007 03:48:17 +0000 (22:48 -0500)]
b43legacy: Use input-polldev for the rfkill switch
This removes the direct call to rfkill on an rfkill event
and replaces it with an input device. This way userspace is also
notified about the event.
This patch is the port to b43legacy of a patch for b43 by Michael Buesch
<mb@bu3sch.de>.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 11 Oct 2007 03:44:22 +0000 (22:44 -0500)]
b43legacy: RF-kill support
This adds full support for the RFKILL button and the RFKILL LED trigger.
This is a port to b43legacy of a patch by Michael Buesch <mb@bu3sch.de>
for b43.
Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Sat, 13 Oct 2007 04:04:51 +0000 (23:04 -0500)]
b43legacy: LED triggers support
Drive the LEDs through the generic LED triggers.
The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to b43legacy.
Signed-off-by: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christoph Hellwig [Thu, 25 Oct 2007 09:15:51 +0000 (17:15 +0800)]
iwlwifi: cleanup Kconfig and ifdefs to split 3945 and 4965
Currently the iwl3945 & iwl4965 drivers share some common Kconfig
symbols. This split it up into options for the individual drivers
and gets rid of all the CONFIG_IWLWIFI cruft.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christoph Hellwig [Thu, 25 Oct 2007 09:15:50 +0000 (17:15 +0800)]
iwlwifi: keep 3945 and 4965 headers separate
The iwl3945 and iwl4965 devices share some common structure, but with a
lot of difference split all over. Currently the two drivers share a lot
of headers and use ugly preprocessor magic to manage the difference.
This patch keeps two entirely separate copies of the headers to get rid
of these hacks an ease future development.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christoph Hellwig [Thu, 25 Oct 2007 09:15:49 +0000 (17:15 +0800)]
iwlwifi: mark more functions/variables static
mark more functions/variables static
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Zhu Yi [Thu, 25 Oct 2007 09:15:48 +0000 (17:15 +0800)]
iwlwifi: Update iwlwifi version stamp to 1.1.19
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Zhu Yi [Thu, 25 Oct 2007 09:15:44 +0000 (17:15 +0800)]
iwlwifi: Update iwlwifi version stamp to 1.1.18
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mabbas [Thu, 25 Oct 2007 09:15:42 +0000 (17:15 +0800)]
iwl4965: exclude 60M rate from probe request
This patch do the following 2 things:
1. Make sure we don't add rate 60M part of supported rate in proble request,
some AP does not like that.
2. It is wrong to set priv->active_rate in this function, this will set
it to all avialable rates which might overwrite the mode supported rate.
priv->active_rate should be set by only from iwl_set_rate.
Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 25 Oct 2007 09:15:41 +0000 (17:15 +0800)]
iwlwifi: Renames struct fw_image_desc to struct fw_desc
This patche shortens the name of struct fw_image_desc to be struct
fw_desc.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Thu, 25 Oct 2007 09:15:40 +0000 (17:15 +0800)]
iwlwifi: add 5965 SCD registers to iwl-prph.h
This patch adds SCD registers for 5965
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Thu, 25 Oct 2007 09:15:39 +0000 (17:15 +0800)]
iwlwifi: move 3945 SCD registers to iwl-prph.h
This patch moves 3945 SCD registers to iwl-prph.h. These registers
are assigned from the periphery bus
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Thu, 25 Oct 2007 09:15:38 +0000 (17:15 +0800)]
iwlwifi-ht: move 4965 SCD registers to iwl-prph.h
This patch moves 4965 SCD registers to iwl-prph.h. These registers
are assigned from the periphery bus
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 25 Oct 2007 09:15:37 +0000 (17:15 +0800)]
iwlwifi: replacing wording restricted to nic access in iwl-io
This patch replaces wording 'restricted' with more appropriate 'nic access'
NIC access is grabbed to prevent NIC entering power save mode
General cleanup of iwl-io.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 25 Oct 2007 09:15:36 +0000 (17:15 +0800)]
iwlwifi: rename restricted_mem to targ_mem
This patch renames restricted_mem suffix with more proper
name targ_mem for function accessing memory on the nic in target mode
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 25 Oct 2007 09:15:35 +0000 (17:15 +0800)]
iwlwifi: replace restricted_reg with prph
This patch renames restricted_reg suffix with more proper
name prhp for function accessing registers on the periphery bus.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mabbas [Thu, 25 Oct 2007 09:15:34 +0000 (17:15 +0800)]
iwlwifi: accept up to 4K frame size on Rx side to fit A-MSDU frame
The driver drops any Rx frame larger than 2332 bytes, but with A-MSDU
frame, it could be up to 4K. This patch makes sure we can process larger
A-MSDU frame.
Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 25 Oct 2007 09:15:32 +0000 (17:15 +0800)]
iwlwifi: using PCI_DEVICE macro
PCI_DEVICE macro is more concise when using defualt values
in device definitions
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 25 Oct 2007 09:15:31 +0000 (17:15 +0800)]
iwlwifi: remove cck_power_index_compensation
cck_power_index_compensation variable was never used
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ian Schram [Thu, 25 Oct 2007 09:15:30 +0000 (17:15 +0800)]
iwlwifi: remove late null-check and duplicate bug_on
These pieces of code appear to be useless. The BUG_ON is also performed in
iwl_send_cmd_async.
Serious karma would be needed to enter iwl_ativate_qos with a null priv.
I had a deja vu when patching this, but for the life of me I couldn't track
down a similar patch.
Signed-off-by: Ian Schram <ischram@telenet.be>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ian Schram [Thu, 25 Oct 2007 09:15:29 +0000 (17:15 +0800)]
iwlwifi: Beautify by removing superfluous newlines and code
Moving code around, lindent, and whatnot created several places where
there appeared to be an 75 column "rule" instead of 80. This patch removes
those that I can spot, hopefully increasing readability.
Signed-off-by: Ian Schram <ischram@telenet.be>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
projects / openwrt / staging / blogic.git / log