Sergey Gorenko [Mon, 21 May 2018 15:55:53 +0000 (18:55 +0300)]
IB/iser: Do not reduce max_sectors
The iSER driver reduces max_sectors. For example, if you load the
ib_iser module with max_sectors=1024, you will see that
/sys/class/block/<bdev>/queue/max_hw_sectors_kb is 508. It is an
incorrect value. The expected value is (max_sectors * sector_size) /
1024 = 512.
Reducing of max_sectors can cause performance degradation due to
unnecessary splitting of IO requests.
The number of pages per MR has been fixed here, so there is no longer
any need to reduce max_sectors.
Fixes: 9c674815d346 ("IB/iser: Fix max_sectors calculation")
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Thu, 31 May 2018 16:05:01 +0000 (12:05 -0400)]
Merge branch 'wip/dl-ipoib' into wip/dl-for-next
Signed-off-by: Doug Ledford <dledford@redhat.com>
Wei Hu(Xavier) [Mon, 28 May 2018 11:39:27 +0000 (19:39 +0800)]
RDMA/hns: Implement the disassociate_ucontext API
This patch implemented the IB core disassociate_ucontext API.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Wei Hu(Xavier) [Mon, 28 May 2018 11:39:26 +0000 (19:39 +0800)]
RDMA/uverbs: Hoist the common process of disassociate_ucontext into ib core
This patch hoisted the common process of disassociate_ucontext
callback function into ib core code, and these code are common
to ervery ib_device driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Wei Hu(Xavier) [Mon, 28 May 2018 11:39:25 +0000 (19:39 +0800)]
RDMA/hns: Fix the illegal memory operation when cross page
This patch fixed the potential illegal operation when using the
extend sge buffer cross page in post send operation. The bug
will cause the calltrace as below.
[ 3302.922107] Unable to handle kernel paging request at virtual address
ffff00003b3a0004
[ 3302.930009] Mem abort info:
[ 3302.932790] Exception class = DABT (current EL), IL = 32 bits
[ 3302.938695] SET = 0, FnV = 0
[ 3302.941735] EA = 0, S1PTW = 0
[ 3302.944863] Data abort info:
[ 3302.947729] ISV = 0, ISS = 0x00000047
[ 3302.951551] CM = 0, WnR = 1
[ 3302.954506] swapper pgtable: 4k pages, 48-bit VAs, pgd =
ffff000009ea5000
[ 3302.961279] [
ffff00003b3a0004] *pgd=
00000023dfffe003, *pud=
00000023dfffd003, *pmd=
00000022dc84c003, *pte=
0000000000000000
[ 3302.972224] Internal error: Oops:
96000047 [#1] SMP
[ 3302.999509] CPU: 9 PID: 19628 Comm: roce_test_main Tainted: G OE 4.14.10 #1
[ 3303.007498] task:
ffff80234df78000 task.stack:
ffff00000f640000
[ 3303.013412] PC is at hns_roce_v2_post_send+0x690/0xe20 [hns_roce_pci]
[ 3303.019843] LR is at hns_roce_v2_post_send+0x658/0xe20 [hns_roce_pci]
[ 3303.026269] pc : [<
ffff0000020694f8>] lr : [<
ffff0000020694c0>] pstate:
804001c9
[ 3303.033649] sp :
ffff00000f643870
[ 3303.036951] x29:
ffff00000f643870 x28:
ffff80232bfa9c00
[ 3303.042250] x27:
ffff80234d909380 x26:
ffff00003b37f0c0
[ 3303.047549] x25:
0000000000000000 x24:
0000000000000003
[ 3303.052848] x23:
0000000000000000 x22:
0000000000000000
[ 3303.058148] x21:
0000000000000101 x20:
0000000000000001
[ 3303.063447] x19:
ffff80236163f800 x18:
0000000000000000
[ 3303.068746] x17:
0000ffff86b76fc8 x16:
ffff000008301600
[ 3303.074045] x15:
000020a51c000000 x14:
3128726464615f65
[ 3303.079344] x13:
746f6d6572202c29 x12:
303035312879656b
[ 3303.084643] x11:
723a6f666e692072 x10:
573a6f666e693a5d
[ 3303.089943] x9 :
0000000000000004 x8 :
ffff8023ce38b000
[ 3303.095242] x7 :
ffff8023ce38b320 x6 :
0000000000000418
[ 3303.100541] x5 :
ffff80232bfa9cc8 x4 :
0000000000000030
[ 3303.105839] x3 :
0000000000000100 x2 :
0000000000000200
[ 3303.111138] x1 :
0000000000000320 x0 :
ffff00003b3a0000
[ 3303.116438] Process roce_test_main (pid: 19628, stack limit = 0xffff00000f640000)
[ 3303.123906] Call trace:
[ 3303.126339] Exception stack(0xffff00000f643730 to 0xffff00000f643870)
[ 3303.215790] [<
ffff0000020694f8>] hns_roce_v2_post_send+0x690/0xe20 [hns_roce_pci]
[ 3303.223293] [<
ffff0000021c3750>] rt_ktest_post_send+0x5d0/0x8b8 [rdma_test]
[ 3303.230261] [<
ffff0000021b3234>] exec_send_cmd+0x664/0x1350 [rdma_test]
[ 3303.236881] [<
ffff0000021b8b30>] rt_ktest_dispatch_cmd_3+0x1510/0x3790 [rdma_test]
[ 3303.244455] [<
ffff0000021bae54>] rt_ktest_dispatch_cmd_2+0xa4/0x118 [rdma_test]
[ 3303.251770] [<
ffff0000021bafec>] rt_ktest_dispatch_cmd+0x124/0xaa8 [rdma_test]
[ 3303.258997] [<
ffff0000021bbc3c>] rt_ktest_dev_write+0x2cc/0x568 [rdma_test]
[ 3303.265947] [<
ffff0000082ad688>] __vfs_write+0x60/0x18c
[ 3303.271158] [<
ffff0000082ad998>] vfs_write+0xa8/0x198
[ 3303.276196] [<
ffff0000082adc7c>] SyS_write+0x6c/0xd4
[ 3303.281147] Exception stack(0xffff00000f643ec0 to 0xffff00000f644000)
[ 3303.287573] 3ec0:
0000000000000003 0000fffffc85faa8 0000000000004e60 0000000000000000
[ 3303.295388] 3ee0:
0000000021fb2000 000000000000ffff eff0e3efe4e58080 0000fffffcc724fe
[ 3303.303204] 3f00:
0000000000000040 1999999999999999 0101010101010101 0000000000000038
[ 3303.311019] 3f20:
0000000000000005 ffffffffffffffff 0d73757461747320 ffffffffffffffff
[ 3303.318835] 3f40:
0000000000000000 0000000000459b00 0000fffffc85e360 000000000043d788
[ 3303.326650] 3f60:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 3303.334465] 3f80:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 3303.342281] 3fa0:
0000000000000000 0000fffffc85e570 0000000000438804 0000fffffc85e570
[ 3303.350096] 3fc0:
0000ffff8553f618 0000000080000000 0000000000000003 0000000000000040
[ 3303.357911] 3fe0:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 3303.365729] [<
ffff000008083808>] __sys_trace_return+0x0/0x4
[ 3303.371288] Code:
b94008e9 34000129 b9400ce2 110006b5 (
b9000402)
[ 3303.377377] ---[ end trace
fd5ab98b3325cf9a ]---
Reported-by: Jie Chen <chenjie103@huawei.com>
Reported-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com>
Fixes: b1c158350968("RDMA/hns: Get rid of virt_to_page and vmap calls after dma_alloc_coherent")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Wei Hu(Xavier) [Mon, 28 May 2018 11:39:24 +0000 (19:39 +0800)]
RDMA/hns: Add reset process for RoCE in hip08
This patch added reset process for RoCE in hip08.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jason Gunthorpe [Tue, 29 May 2018 21:23:18 +0000 (15:23 -0600)]
Merge branch 'mini_cqe' into git://git./linux/kernel/git/rdma/rdma for-next
Leon Romanovsky says:
====================
Introduce new internal to mlx5 CQE format - mini-CQE. It is a CQE in
compressed form that holds data needed to extra a single full CQE.
It is a stride index, byte count and packet checksum.
====================
* mini_cqe:
IB/mlx5: Introduce a new mini-CQE format
IB/mlx5: Refactor CQE compression response
net/mlx5: Exposing a new mini-CQE format
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 29 May 2018 02:32:40 +0000 (20:32 -0600)]
RDMA/core: Remove indirection through ib_cache_setup()
This once might have made sense when cache.c was in a different module
from device.c, but today it just obfuscation. Get rid of the wrappers
and call roge_gid_mgmt_init()/cleanup() directly.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Yonatan Cohen [Sun, 27 May 2018 10:42:34 +0000 (13:42 +0300)]
IB/mlx5: Introduce a new mini-CQE format
The new mini-CQE format includes the stride index, byte count and
packet checksum.
Stride index is needed for striding WQ feature.
This patch exposes this capability and enables its setting
via mlx5 UHW data as part of query device and cq creation.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yonatan Cohen [Sun, 27 May 2018 10:42:33 +0000 (13:42 +0300)]
IB/mlx5: Refactor CQE compression response
Refactor CQE compression response to be fully set only
when it`s really supported. There is no change from user
perspective because anyway resp.cqe_comp_caps.max_num was
set to zero.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>W
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yonatan Cohen [Sun, 27 May 2018 10:42:32 +0000 (13:42 +0300)]
net/mlx5: Exposing a new mini-CQE format
The new mini-CQE format includes byte-count, checksum
and stride index.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Jason Gunthorpe [Mon, 28 May 2018 17:44:35 +0000 (11:44 -0600)]
Merge branch 'mr_fix' into git://git./linux/kernel/git/rdma/rdma for-next
Update mlx4 to support user MR creation against read-only memory, previously
it required the memory to be writable.
Based on rdma for-rc due to dependencies.
* mr_fix: (2 commits)
IB/mlx4: Mark user MR as writable if actual virtual memory is writable
IB/core: Make testing MR flags for writability a static inline function
Jack Morgenstein [Wed, 23 May 2018 12:30:31 +0000 (15:30 +0300)]
IB/mlx4: Mark user MR as writable if actual virtual memory is writable
To allow rereg_user_mr to modify the MR from read-only to writable without
using get_user_pages again, we needed to define the initial MR as writable.
However, this was originally done unconditionally, without taking into
account the writability of the underlying virtual memory.
As a result, any attempt to register a read-only MR over read-only
virtual memory failed.
To fix this, do not add the writable flag bit when the user virtual memory
is not writable (e.g. const memory).
However, when the underlying memory is NOT writable (and we therefore
do not define the initial MR as writable), the IB core adds a
"force writable" flag to its user-pages request. If this succeeds,
the reg_user_mr caller gets a writable copy of the original pages.
If the user-space caller then does a rereg_user_mr operation to enable
writability, this will succeed. This should not be allowed, since
the original virtual memory was not writable.
Cc: <stable@vger.kernel.org>
Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Jack Morgenstein [Wed, 23 May 2018 12:30:30 +0000 (15:30 +0300)]
IB/core: Make testing MR flags for writability a static inline function
Make the MR writability flags check, which is performed in umem.c,
a static inline function in file ib_verbs.h
This allows the function to be used by low-level infiniband drivers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Zhu Yanjun [Mon, 28 May 2018 09:03:41 +0000 (05:03 -0400)]
IB/rxe: avoid unnecessary export
The function rxe_remove_all is only used in this modules.
There is no other modules that call this function. So it
is not necessary to export it.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Wei Hu(Xavier) [Wed, 23 May 2018 10:16:28 +0000 (18:16 +0800)]
RDMA/hns: Increase checking CMQ status timeout value
This patch increases checking CMQ status timeout value and
uses the same value with NIC driver to avoid deficiency of
time.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Wei Hu(Xavier) [Wed, 23 May 2018 10:16:27 +0000 (18:16 +0800)]
RDMA/hns: Modify uar allocation algorithm to avoid bitmap exhaust
This patch modified uar allocation algorithm in hns_roce_uar_alloc
function to avoid bitmap exhaust.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Thu, 24 May 2018 15:40:43 +0000 (09:40 -0600)]
Merge tag 'mlx5-updates-2018-05-17' of git://git./linux/kernel/git/mellanox/linux into for-next
mlx5-updates-2018-05-17
mlx5 core dirver updates for both net-next and rdma-next branches.
From Christophe JAILLET, first three patche to use kvfree where needed.
From: Or Gerlitz <ogerlitz@mellanox.com>
Next six patches from Roi and Co adds support for merged
sriov e-switch which comes to serve cases where both PFs, VFs set
on them and both uplinks are to be used in single v-switch SW model.
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
This model allows to offload TC eswitch rules between VFs belonging
to different PFs (and hence have different eswitch affinity), it also
sets the some of the foundations needed for uplink LAG support.
* tag 'mlx5-updates-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5e: Explicitly set source e-switch in offloaded TC rules
net/mlx5: Add source e-switch owner
net/mlx5e: Explicitly set destination e-switch in FDB rules
net/mlx5: Add destination e-switch owner
net/mlx5: Properly handle a vport destination when setting FTE
net/mlx5: Add merged e-switch cap
IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'
net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()'
net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
Parav Pandit [Tue, 22 May 2018 17:33:46 +0000 (20:33 +0300)]
IB/core: Introduce and use rdma_gid_table()
There are several places a gid table is accessed.
Have a helper tiny function rdma_gid_table() to avoid code
duplication at such places.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 22 May 2018 17:33:45 +0000 (20:33 +0300)]
IB/core: Reduce the places that use zgid
Instead of open coding memcmp() to check whether a given GID is zero or
not, use a helper function to do so, and replace instances of
memcpy(z,&zgid) with memset.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Erez Shitrit [Mon, 21 May 2018 08:41:01 +0000 (11:41 +0300)]
IB/mlx5: Fetch soft WQE's on fatal error state
On fatal error the driver simulates CQE's for ULPs that rely on
completion of all their posted work-request.
For the GSI traffic, the mlx5 has its own mechanism that sends the
completions via software CQE's directly to the relevant CQ.
This should be kept in fatal error too, so the driver should simulate
such CQE's with the specified error state in order to complete GSI QP
work requests.
Without the fix the next deadlock might appears:
schedule_timeout+0x274/0x350
wait_for_common+0xec/0x240
mcast_remove_one+0xd0/0x120 [ib_core]
ib_unregister_device+0x12c/0x230 [ib_core]
mlx5_ib_remove+0xc4/0x270 [mlx5_ib]
mlx5_detach_device+0x184/0x1a0 [mlx5_core]
mlx5_unload_one+0x308/0x340 [mlx5_core]
mlx5_pci_err_detected+0x74/0xe0 [mlx5_core]
Cc: <stable@vger.kernel.org> # 4.7
Fixes: 89ea94a7b6c4 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Wed, 23 May 2018 05:22:11 +0000 (08:22 +0300)]
RDMA/ucm: Mark UCM interface as BROKEN
In commit
357d23c811a7 ("Remove the obsolete libibcm library")
in rdma-core [1], we removed obsolete library which used the
/dev/infiniband/ucmX interface.
Following multiple syzkaller reports about non-sanitized
user input in the UCMA module, the short audit reveals the same
issues in UCM module too.
It is better to disable this interface in the kernel,
before syzkaller team invests time and energy to harden
this unused interface.
[1] https://github.com/linux-rdma/rdma-core/pull/279
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 22 May 2018 05:34:09 +0000 (08:34 +0300)]
IB/core: Remove duplicate declaration of gid_cache_wq
Remove duplicate declaration of gid_cache_wq.
Fixes: d41861942 ("IB/core: Add generic function to extract IB speed from netdev")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Tue, 22 May 2018 05:31:03 +0000 (08:31 +0300)]
RDMA/mlx5: Remove debug prints of VMA pointers
Remove various prints of VMA pointers.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
oulijun [Tue, 22 May 2018 12:47:16 +0000 (20:47 +0800)]
RDMA/hns: Rename the idx field of db
The lower 15 bit of paramter of db structure means different
meanings when db type is sq, rq and srq.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mike Marciniszyn [Sat, 19 May 2018 00:07:01 +0000 (17:07 -0700)]
IB/qib: Fix DMA api warning with debug kernel
The following error occurs in a debug build when running MPI PSM:
[ 307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158
check_unmap+0x4ee/0xa20
[ 307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map
error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page]
[ 307.517494] Modules linked in:
[ 307.531584] ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma
sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib
scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm
ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm
irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg
ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt
iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler
ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod
crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common
drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core
[ 307.846113] pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not
tainted 3.10.0-862.el7.x86_64.debug #1
[ 307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013
[ 307.944206] Call Trace:
[ 307.956973] [<
ffffffffbd9e915b>] dump_stack+0x19/0x1b
[ 307.982201] [<
ffffffffbd2a2f58>] __warn+0xd8/0x100
[ 308.005999] [<
ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80
[ 308.034260] [<
ffffffffbd5f667e>] check_unmap+0x4ee/0xa20
[ 308.060801] [<
ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0
[ 308.090689] [<
ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0
[ 308.120155] [<
ffffffffbd4082e0>] ? might_fault+0xa0/0xb0
[ 308.146656] [<
ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib]
[ 308.180739] [<
ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib]
[ 308.210733] [<
ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80
[ 308.244837] [<
ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0
[ 308.266025] qib_ib0.8006: multicast join failed for
ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22
[ 308.323421] [<
ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0
[ 308.347077] [<
ffffffffbd492a5c>] ? fget_light+0xfc/0x510
[ 308.372533] [<
ffffffffbd47045a>] SyS_write+0x8a/0x100
[ 308.396456] [<
ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21
The code calls a qib_map_page() which has never correctly tested for a
mapping error.
Fix by testing for pci_dma_mapping_error() in all cases and properly
handling the failure in the caller.
Additionally, streamline qib_map_page() arguments to satisfy just
the single caller.
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Tested-by: Don Dutile <ddutile@redhat.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Alex Estrin [Wed, 16 May 2018 01:31:39 +0000 (18:31 -0700)]
IB/isert: Fix for lib/dma_debug check_sync warning
The following error message occurs on a target host in a debug build
during session login:
[ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0
[ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes]
......snip .....
[ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1
[ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015
[ 3524.555740] Call Trace:
[ 3524.559102] [<
ffffffffa5fe915b>] dump_stack+0x19/0x1b
[ 3524.565477] [<
ffffffffa58a2f58>] __warn+0xd8/0x100
[ 3524.571557] [<
ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80
[ 3524.578610] [<
ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0
[ 3524.585177] [<
ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0
[ 3524.592812] [<
ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90
[ 3524.601029] [<
ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20
[ 3524.608574] [<
ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80
[ 3524.616699] [<
ffffffffa58e9b76>] ? resched_curr+0xf6/0x140
[ 3524.623567] [<
ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert]
[ 3524.633060] [<
ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert]
[ 3524.641383] [<
ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430
[ 3524.648561] [<
ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod]
[ 3524.658557] [<
ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod]
[ 3524.668084] [<
ffffffffa59f9bc9>] ? kstrdup+0x49/0x60
[ 3524.674420] [<
ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod]
[ 3524.684656] [<
ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod]
[ 3524.694901] [<
ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod]
[ 3524.705446] [<
ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod]
[ 3524.715976] [<
ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod]
[ 3524.725739] [<
ffffffffa58d60ff>] kthread+0xef/0x100
[ 3524.732007] [<
ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80
[ 3524.739540] [<
ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21
[ 3524.747558] [<
ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80
[ 3524.755088] ---[ end trace
23f8bf9238bd1ed8 ]---
[ 3595.510822] iSCSI/iqn.1994-05.com.redhat:
537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it
with dma-mapped address.
login_tx_desc is a part of iser_conn structure and is used only once
during login negotiation, so the issue is fixed by eliminating
dma_sync call for this buffer using a special case routine.
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mike Marciniszyn [Wed, 16 May 2018 01:31:24 +0000 (18:31 -0700)]
IB/{rdmavt,hfi1}: Change hrtimer add to use pinned version
Given we are dealing with nano-second level timers, when the timer
pops, ensure it happens on the CPU which caused the timer to be set
in the first place. This avoids excessive jitter from the desired
expiration time by avoiding the cost of switching our context to
another CPU that is cache cold for this given timer.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Wed, 16 May 2018 01:31:17 +0000 (18:31 -0700)]
IB/hfi1: Set port number for errorinfo MAD response
For errorinfo MAD requests, the response has a 0 port number left over
from a memset. Instead we should always set the port number in the
response.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mike Marciniszyn [Wed, 16 May 2018 01:31:09 +0000 (18:31 -0700)]
IB/hfi1: Cleanup of exp_rcv
The knowledge of the internal workings of the expect receive
is too distributed.
Fix by:
- right size several rcd fields associated with
expect receive
- making an init entrance to init all the lists
- consolidate all the allocations into an array anchored
in the rcd
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Don Hiatt [Wed, 16 May 2018 01:28:22 +0000 (18:28 -0700)]
IB/hfi1: Add 16B Management Packet trace support
Add trace support for 16B Management Packets.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Don Hiatt [Wed, 16 May 2018 01:28:15 +0000 (18:28 -0700)]
IB/hfi1: Add support for 16B Management Packets
16B Management Packets (L4=0x08) replace the BTH and DETH
of normal MAD packet packets with a header containing the
the source and destination queue pair numbers; fields that
were originally retrieved from the BTH/DETH are now populated
from this header as well as from the 16B LRH (e.g. pkey).
16B Management Packets are used as an optimized management
format on 16B fabrics.
These management packets have an opcode of IB_OPCODE_UD_SEND_ONLY,
a fixed 3Byte pad, and a header length of 24Bytes.
The decision as to when we send a management packet is based
upon either the source or destination queue pair number being
0 or 1.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Don Hiatt [Wed, 16 May 2018 01:28:07 +0000 (18:28 -0700)]
IB/hfi1: Define 16B Management Packets
Add 16B Management Packet definition. This optimized packet
format replaces the ib_other_headers and BTH with a source
and destination QP number.
To support these packets we introduce struct opa_16b_mgmt
into the struct hfi1_16b_header.
This packet format is only used for MAD packets using the
IB_OPCODE_UD_SEND_ONLY opcode on QP0/1.
The original 16B implementation failed to use 16B management
packets so now we add their definition.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Thu, 10 May 2018 14:32:01 +0000 (07:32 -0700)]
iw_cxgb4: provide detailed driver-specific MR information
Add a table of important fields from the fw_ri_tpte structure to the mr
resource tracking table. This is helpful in debugging.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Thu, 10 May 2018 14:31:51 +0000 (07:31 -0700)]
iw_cxgb4: provide detailed driver-specific CQ information
Add a table of important fields from the c4iw_cq* structures to the cq
resource tracking table. This is helpful in debugging.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Thu, 10 May 2018 14:31:43 +0000 (07:31 -0700)]
iw_cxgb4: provide detailed provider-specific CM_ID information
Add a table of important fields from the c4iw_ep* structures to the cm_id
resource tracking table. This is helpful in debugging.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Tue, 22 May 2018 12:47:15 +0000 (20:47 +0800)]
RDMA/hns: Move the location for initializing tmp_len
When posted work request, it need to compute the length of
all sges of every wr and fill it into the msg_len field of
send wqe. Thus, While posting multiple wr,
tmp_len should be reinitialized to zero.
Fixes: 8b9b8d143b46 ("RDMA/hns: Fix the endian problem for hns")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
oulijun [Tue, 22 May 2018 12:47:14 +0000 (20:47 +0800)]
RDMA/hns: Bugfix for cq record db for kernel
When use cq record db for kernel, it needs to set the hr_cq->db_en
to 1 and configure the dma address of record cq db of qp context.
Fixes: 86188a8810ed ("RDMA/hns: Support cq record doorbell for kernel space")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 22 May 2018 21:56:51 +0000 (15:56 -0600)]
IB/uverbs: Fix uverbs_attr_get_obj
The err pointer comes from uverbs_attr_get, not from the uobject member,
which does not store an ERR_PTR.
Fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Kalderon, Michal [Tue, 15 May 2018 12:13:33 +0000 (15:13 +0300)]
RDMA/qedr: Fix doorbell bar mapping for dpi > 1
Each user_context receives a separate dpi value and thus a different
address on the doorbell bar. The qedr_mmap function needs to validate
the address and map the doorbell bar accordingly.
The current implementation always checked against dpi=0 doorbell range
leading to a wrong mapping for doorbell bar. (It entered an else case
that mapped the address differently). qedr_mmap should only be used
for doorbells, so the else was actually wrong in the first place.
This only has an affect on arm architecture and not an issue on a
x86 based architecture.
This lead to doorbells not occurring on arm based systems and left
applications that use more than one dpi (or several applications
run simultaneously ) to hang.
Fixes: ac1b36e55a51 ("qedr: Add support for user context verbs")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Evgenii Smirnov [Tue, 22 May 2018 14:00:47 +0000 (16:00 +0200)]
RDMA/ipoib: drop skb on path record lookup failure
In unicast_arp_send function there is an inconsistency in error handling
of path_rec_start call. If path_rec_start is called because of an absent
ah field, skb will be dropped. But if it is called on a creation of a
new path, or if the path is invalid, skb will be added to the tail of
path queue. In case of a new path it will be dropped on path_free, but
in case of invalid path it can stay in the queue forever.
This patch unifies the behavior, dropping skb in all cases
of path_rec_start failure.
Signed-off-by: Evgenii Smirnov <evgenii.smirnov@profitbricks.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Thu, 10 May 2018 14:31:36 +0000 (07:31 -0700)]
RDMA/CMA: add rdma_iw_cm_id() and rdma_res_to_id() helpers
Add a helper function for iwarp drivers to be able to map an
rdma_cm_id to an iw_cm_id. This is useful for dumping driver specific
NLDEV/RESTRACK connection state.
Add a helper to return the rdma_cm_id pointer from the rdma_restack
pointer. This is needed for rdma drivers to map a res entry back to
the public rdma_cm_id struct.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Thu, 10 May 2018 14:31:28 +0000 (07:31 -0700)]
iw_cxgb4: always set iw_cm_id.provider_data
In active side connections, the provider_data field is not
getting set. This will be used in a subsequent patch to dump
state, so always set it.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Fri, 18 May 2018 15:36:09 +0000 (11:36 -0400)]
RDMA/ipoib: Update paths on CLIENT_REREG/SM_CHANGE events
We do a light flush on CLIENT_REREG and SM_CHANGE events. This goes
through and marks paths invalid. But we weren't always checking for this
validity when we needed to, and so we could keep using a path marked
invalid. What's more, once we establish a path with a valid ah, we put
a pointer to the ah in the neigh struct directly, so even if we mark the
path as invalid, as long as the neigh has a direct pointer to the ah, it
keeps using the old, outdated ah.
To fix this we do several things.
1) Put the valid flag in the ah instead of the path struct, so when we
put the ah pointer directly in the neigh struct, we can easily check the
validity of the ah on send events.
2) Check the neigh->ah and neigh->ah->valid elements in the needed
places, and if we have an ah, but it's invalid, then invoke a refresh of
the ah.
3) Fix the various places that check for path, but didn't check for
path->valid (now path->ah && path->ah->valid).
Reported-by: Evgenii Smirnov <evgenii.smirnov@profitbricks.com>
Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events")
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shahar Klein [Sun, 18 Mar 2018 07:03:49 +0000 (09:03 +0200)]
net/mlx5e: Explicitly set source e-switch in offloaded TC rules
Set a specific source e-switch when setting a rule that matches on the
ingress port.
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Shahar Klein [Sun, 18 Mar 2018 07:02:06 +0000 (09:02 +0200)]
net/mlx5: Add source e-switch owner
The source e-switch owner allows a vport on one e-switch port be associated
with a rule defined on the second port e-switch.
The role of the source eswitch owner valid bit in the flow group is to
allow the firmware fail driver attempts to wild card the source eswitch
match field. If this bit is not set, the firmware ignores the source
eswitch owner field totally.
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Rabie Loulou [Sun, 18 Mar 2018 06:29:04 +0000 (08:29 +0200)]
net/mlx5e: Explicitly set destination e-switch in FDB rules
Set a specific destination e-switch when setting a destination vport.
Signed-off-by: Rabie Loulou <rabiel@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Shahar Klein [Thu, 22 Mar 2018 10:32:12 +0000 (12:32 +0200)]
net/mlx5: Add destination e-switch owner
The destination e-switch owner allows a rule in namespace of one e-switch
owner to point to a vport that is natively associated with another
e-switch owner.
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Shahar Klein [Thu, 22 Mar 2018 09:56:51 +0000 (11:56 +0200)]
net/mlx5: Properly handle a vport destination when setting FTE
When creating FTE, properly distinguish between destination being vport
or tir. The previous code just worked accidentally b/c of both dest being
in the same offset within a union.
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Roi Dayan [Tue, 5 Dec 2017 08:38:58 +0000 (10:38 +0200)]
net/mlx5: Add merged e-switch cap
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
Under merged eswitch, both the matching on source vport and setting
destination vport can have a 2nd attribute which is the vhca id of the
eswitch owner.
For example:
esw0: {match: <src vport=1 owner=0> action: fwd to <dst vport=7, owner=1>}
is a flow set on eswitch0 matching on source vport=1 from his eswitch
and the action being fwd to dest vport=7 of eswitch1.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz Klein <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Zhu Yanjun [Thu, 17 May 2018 08:55:22 +0000 (04:55 -0400)]
IB/rxe: avoid calling WARN_ON_ONCE twice
In the exit branch, WARN_ON_ONCE is called to show stack. So it is
not necessary to call WARN_ON_ONCE before going to exit.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yixian Liu [Fri, 11 May 2018 08:31:23 +0000 (16:31 +0800)]
RDMA/hns: Add 64KB page size support for hip08
This patch adds the support of 64KB page size for hip08
in kernel.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Sebastian Andrzej Siewior [Wed, 16 May 2018 19:47:32 +0000 (21:47 +0200)]
IB/ipoib: replace local_irq_disable() with proper locking
In ipoib_mcast_restart_task() the netif_addr_lock() is invoked prior
local_irq_save(). netif_addr_lock() should not be invoked in interrupt disabled
section, only in BH disabled sections.
The priv->lock is always acquired with disabled interrupts. The only place
where netif_addr_lock() and priv->lock nest ist ipoib_mcast_restart_task().
Drop the local_irq_save() and acquire priv->lock with spin_lock_irq() inside
the netif_addr locked section. It's safe to do so because the caller is either
a worker function or __ipoib_ib_dev_flush() which are both calling with
interrupts enabled (and since BH is enabled here, too so
netif_addr_lock_bh() needs to be used).
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich [Sun, 13 May 2018 11:33:35 +0000 (14:33 +0300)]
IB/mlx5: Expose MPLS related tunneling offloads
This patch reports the device's capbilities to offload
encapsulated MPLS tunnel protocols to user-space:
- Capability to offload MPLS over GRE.
- Capability to offload MPLS over UDP.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich [Sun, 13 May 2018 11:33:34 +0000 (14:33 +0300)]
IB/mlx5: Add support for MPLS flow specification
This patch introduces support for the MPLS flow spec and
allows the creation of rules that are matching on the
MPLS label.
Applying the rule matching depends on the flow specs order and
the location of the MPLS in the spec list as there are different
configurations to be made in the device in the cases of MPLSoGRE
and MPLSoUDP vs. non-encapsulated MPLS.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich [Sun, 13 May 2018 11:33:33 +0000 (14:33 +0300)]
IB/mlx5: Add support for GRE flow specification
This patch introduces support for the GRE flow spec and
allowing the creation of rules based on the protocol and
key fields that are part of GRE protocol header.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich [Sun, 13 May 2018 11:33:32 +0000 (14:33 +0300)]
IB/uverbs: Introduce a MPLS steering match filter
Add a new MPLS steering match filter that can match against
a single MPLS tag field.
Since the MPLS header can reside in different locations in the packet's
protocol stack as well as be encapsulated with a tunnel protocol, it
is required to know the exact location of the header in the protocol
stack.
Therefore, when including the MPLS protocol spec in the specs list,
it is mandatory to provide the list in an ordered manner, so
that it represents the actual header order in a matching packet.
Drivers that process the spec list and apply the matching rule
should treat the position of the MPLS spec in the spec list as the
actual location of the MPLS label in the packet's protocol stack.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich [Sun, 13 May 2018 11:33:31 +0000 (14:33 +0300)]
IB/uverbs: Expose MPLS flow spec to the user-kernel ABI header
Add ib_uverbs_flow_spec_mpls to define a rule to match the MPLS
protocol.
The spec includes the generic specs header, type, size and reserved
fields while the filter itself is defined as ib_uverbs_flow_mpls_filter
and includes a single 32bit field named 'label' which consists of:
Bits 0:19 - The MPLS label.
Bits 20:22 - Traffic class field.
Bit 23 - Bottom of stack bit.
Bits 24:31 - Time to live (TTL) field.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich [Sun, 13 May 2018 11:33:30 +0000 (14:33 +0300)]
IB/uverbs: Introduce a GRE steering match filter
Adding a new GRE steering match filter that can match against
key and protocol fields.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich [Sun, 13 May 2018 11:33:29 +0000 (14:33 +0300)]
IB/uverbs: Expose GRE flow spec to the user-kernel ABI header
Add ib_uverbs_flow_spec_gre to define a rule to match the GRE
encapsulation protocol.
The spec includes the generic specs header, type, size and reserved
fields while the filter itself is defined as ib_uverbs_flow_gre_filter
and includes:
1. Checksum present bit, key present bit and version bits in a single
16bit field.
2. Protocol type field - Indicates the ether protocol type of the
encapsulated payload.
3. Key field - present if key bit is set and contains an application
specific key value.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Christophe JAILLET [Thu, 17 May 2018 00:50:19 +0000 (17:50 -0700)]
IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.
Fixes: 1cbe6fc86ccfe ("IB/mlx5: Add support for CQE compressing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Christophe JAILLET [Thu, 17 May 2018 00:49:01 +0000 (17:49 -0700)]
net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()'
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.
Fixes: fed9ce22bf8ae ("net/mlx5: E-Switch, Add API to create vport rx rules")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Christophe JAILLET [Thu, 17 May 2018 00:46:45 +0000 (17:46 -0700)]
net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.
Fixes: 9efa75254593d ("net/mlx5_core: Introduce access functions to query vport RoCE fields")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Parav Pandit [Mon, 14 May 2018 08:11:09 +0000 (11:11 +0300)]
IB/cm: Store and restore ah_attr during CM message processing
During CM request processing flow, ah_attr is initialized twice.
First based on wc. Secondly based on primary path record.
ah_attr initialization from path record can fail, which leads to ah_attr
zeroed out.
Therefore, always initialize ah_attr on stack during reinitialization
phase. If ah_attr init is successful, use the new ah_attry by
overwriting the old one. If the ah_attr init fails, continue to use the
last ah_attr.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Mon, 14 May 2018 08:11:08 +0000 (11:11 +0300)]
IB/cm: Store and restore ah_attr during LAP msg processing
During CM LAP processing, ah_attr is reinitialized on receiving LAP
request. First likely during CM request processing.
ah_attr might get zero out if LAP processing fails.
Therefore, attempt to create new ah_attr for the LAP message.
If the initialization fails, continue with older ah_attr.
If the initialization passes, consider the new ah_attr by overwriting
the older one.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Mon, 14 May 2018 08:11:07 +0000 (11:11 +0300)]
IB/cm: Avoid AV ah_attr overwriting during LAP message handling
AH attribute of the cm_id can be overwritten if LAP message is received
on CM request which is in progress. This bug got introduced to avoid
sleeping when spin lock is held as part of commit in Fixes tag.
Therefore validate the cm_id state first and continue to perform AV
ah_attr initialization.
Given that Aleternative path related messages are not supported for
RoCE, init_av_from_response/path is such messages are ok to be called
from blocking context.
Fixes: 33f93e1ebcf5 ("IB/cm: Fix sleeping while spin lock is held")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Shiraz Saleem [Sat, 12 May 2018 12:50:30 +0000 (07:50 -0500)]
i40iw: Extend port reuse support for listeners
If two listeners are created with different IP's but
same port, the second rdma_listen fails due to a
duplicate port entry being added from the CQP add
APBVT OP. commit
f16dc0aa5ea2 ("i40iw: Add support
for port reuse on active side connections") does not
account for listener side port reuse.
Check for duplicate port before invoking the CQP command
to add APBVT entry and delete the entry only if the port
is not in use. Additionally, consolidate all port-reuse
logic into i40iw_manage_apbvt.
Fixes: f16dc0aa5ea2 ("i40iw: Add support for port reuse on active side connections")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lidong Chen [Tue, 8 May 2018 08:50:16 +0000 (16:50 +0800)]
IB/umem: Use the correct mm during ib_umem_release
User-space may invoke ibv_reg_mr and ibv_dereg_mr in different threads.
If ibv_dereg_mr is called after the thread which invoked ibv_reg_mr has
exited, get_pid_task will return NULL and ib_umem_release will not
decrease mm->pinned_vm.
Instead of using threads to locate the mm, use the overall tgid from the
ib_ucontext struct instead. This matches the behavior of ODP and
disassociate in handling the mm of the process that called ibv_reg_mr.
Cc: <stable@vger.kernel.org>
Fixes: 87773dd56d54 ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get")
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yuval Shaia [Thu, 10 May 2018 06:32:43 +0000 (09:32 +0300)]
IB/core: Remove redundant return
"return" statement at the end of void function is redundant, removing
it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Qing Huang <qing.huang@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Steve Wise [Tue, 15 May 2018 18:19:21 +0000 (11:19 -0700)]
iw_cxgb4: remove wr_id attributes
Remove sq/rq wr_id attributes because typically they are pointers and
we don't want to pass up kernel pointers.
Fixes: 056f9c7f39bf ("iw_cxgb4: dump detailed driver-specific QP information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Steve Wise [Tue, 15 May 2018 18:19:30 +0000 (11:19 -0700)]
RDMA/NLDEV: remove mr iova attribute
Remove mr iova attribute because we don't want to pass up kernel pointers.
Fixes: fccec5b89ac6 ("RDMA/nldev: provide detailed MR information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Steve Wise [Mon, 14 May 2018 18:12:26 +0000 (11:12 -0700)]
iw_cxgb4: fix uninitialized variable warnings
Fixes: 056f9c7f39bf ("iw_cxgb4: dump detailed driver-specific QP information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Doug Ledford [Tue, 15 May 2018 19:54:46 +0000 (15:54 -0400)]
RDMA/uapi: Fix uapi breakage
During this merge window, we added support for addition RDMA netlink
operations. Unfortunately, we added the items in the middle of our uapi
enum. Fix that before final release.
Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource
tracking")
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Tue, 15 May 2018 18:19:19 +0000 (14:19 -0400)]
RDMA/hfi1: Fix build error with debugfs disabled
A recent patch set to rework the usage of debugfs and to add fault
injection capabilities via debugfs files to the hfi1 driver introduced a
build error that only shows up when debugfs is fully disabled. The
patchset mistakenly defines some empty stub functions in two different
headers when debugfs is disabled. Remove the set that shouldn't have
been there to resolve the issue.
Fixes: a74d5307caba ("IB/hfi1: Rework fault injection machinery")
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ben Hutchings [Wed, 9 May 2018 21:48:41 +0000 (22:48 +0100)]
IB: Fix RDMA_RXE and INFINIBAND_RDMAVT dependencies for DMA_VIRT_OPS
DMA_VIRT_OPS requires that dma_addr_t is at least as wide as a
pointer, which is expressed as a dependency on !64BIT ||
ARCH_DMA_ADDR_T_64BIT.
For parisc64 this is not true, and if these IB modules are enabled,
kconfig warns:
WARNING: unmet direct dependencies detected for DMA_VIRT_OPS
Depends on [n]: HAS_DMA [=y] && (!64BIT [=y] || ARCH_DMA_ADDR_T_64BIT)
Selected by [m]:
- INFINIBAND_RDMAVT [=m] && INFINIBAND [=m] && 64BIT [=y] && PCI [=y]
- RDMA_RXE [=m] && INET [=y] && PCI [=y] && INFINIBAND [=m]
Add dependencies to fix this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Tue, 15 May 2018 14:33:18 +0000 (10:33 -0400)]
Merge tag 'mlx5-updates-2018-05-07' of git://git./linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next
mlx5-updates-2018-05-07
mlx5 core driver misc cleanups and updates:
- fix spelling mistake: "modfiy" -> "modify"
- Cleanup unused field in Work Queue parameters
- dump_command mailbox length printed
- Refactor num of blocks in mailbox calculation
- Decrease level of prints about non-existent MKEY
- remove some extraneous spaces in indentations
Pulling the same update already pulled into net-next by Dave Miller.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Brian Welty [Wed, 2 May 2018 13:44:03 +0000 (06:44 -0700)]
IB/{hfi1, qib, rdmavt}: Move logic to allocate receive WQE into rdmavt
Moving receive-side WQE allocation logic into rdmavt will allow
further code reuse between qib and hfi1 drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Sanchez [Wed, 2 May 2018 13:43:55 +0000 (06:43 -0700)]
IB/{hfi1, rdmavt, qib}: Implement CQ completion vector support
Currently the driver doesn't support completion vectors. These
are used to indicate which sets of CQs should be grouped together
into the same vector. A vector is a CQ processing thread that
runs on a specific CPU.
If an application has several CQs bound to different completion
vectors, and each completion vector runs on different CPUs, then
the completion queue workload is balanced. This helps scale as more
nodes are used.
Implement CQ completion vector support using a global workqueue
where a CQ entry is queued to the CPU corresponding to the CQ's
completion vector. Since the workqueue is global, it's guaranteed
to always be there when queueing CQ entries; Therefore, the RCU
locking for cq->rdi->worker in the hot path is superfluous.
Each completion vector is assigned to a different CPU. The number of
completion vectors available is computed by taking the number of
online, physical CPUs from the local NUMA node and subtracting the
CPUs used for kernel receive queues and the general interrupt.
Special use cases:
* If there are no CPUs left for completion vectors, the same CPU
for the general interrupt is used; Therefore, there would only
be one completion vector available.
* For multi-HFI systems, the number of completion vectors available
for each device is the total number of completion vectors in
the local NUMA node divided by the number of devices in the same
NUMA node. If there's a division remainder, the first device to
get initialized gets an extra completion vector.
Upon a CQ creation, an invalid completion vector could be specified.
Handle it as follows:
* If the completion vector is less than 0, set it to 0.
* Set the completion vector to the result of the passed completion
vector moded with the number of device completion vectors
available.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Sanchez [Wed, 2 May 2018 13:43:47 +0000 (06:43 -0700)]
IB/hfi1: Create common functions for affinity CPU mask operations
CPU masks are used to keep track of affinity assignments for IRQs
and processes. Operations performed on these affinity CPU masks are
duplicated throughout the code.
Create common functions for affinity CPU mask operations to remove
duplicate code.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Sanchez [Wed, 2 May 2018 13:43:39 +0000 (06:43 -0700)]
IB/hfi1: Optimize kthread pointer locking when queuing CQ entries
All threads queuing CQ entries on different CQs are unnecessarily
synchronized by a spin lock to check if the CQ kthread worker hasn't
been destroyed before queuing an CQ entry.
The lock used in
6efaf10f163d ("IB/rdmavt: Avoid queuing work into a
destroyed cq kthread worker") is a device global lock and will have
poor performance at scale as completions are entered from a large
number of CPUs.
Convert to use RCU where the read side of RCU is rvt_cq_enter() to
determine that the worker is alive prior to triggering the
completion event.
Apply write side RCU semantics in rvt_driver_cq_init() and
rvt_cq_exit().
Fixes: 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Kamenee Arumugam [Wed, 2 May 2018 13:43:31 +0000 (06:43 -0700)]
IB/Hfi1: Read CCE Revision register to verify the device is responsive
When Hfi1 device is unresponsive, reading the RcvArrayCnt register
will return all 1's. This value is then used to remap chip's RcvArray.
The incorrect all ones value used in remapping RcvArray
will cause warn on as shown by trace below:
[<
ffffffff81685eac>] dump_stack+0x19/0x1b
[<
ffffffff81085820>] warn_slowpath_common+0x70/0xb0
[<
ffffffff810858bc>] warn_slowpath_fmt+0x5c/0x80
[<
ffffffff81065c29>] __ioremap_caller+0x279/0x320
[<
ffffffff8142873c>] ? _dev_info+0x6c/0x90
[<
ffffffffa021d155>] ? hfi1_pcie_ddinit+0x1d5/0x330 [hfi1]
[<
ffffffff81065d62>] ioremap_wc+0x32/0x40
[<
ffffffffa021d155>] hfi1_pcie_ddinit+0x1d5/0x330 [hfi1]
[<
ffffffffa0204851>] hfi1_init_dd+0x1d1/0x2440 [hfi1]
[<
ffffffff813503dc>] ? pci_write_config_word+0x1c/0x20
Read CCE revision register first to verify that WFR device is
responsive. If the read return "all ones", bail out from init
and fail the driver load.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mitko Haralanov [Wed, 2 May 2018 13:43:24 +0000 (06:43 -0700)]
IB/hfi1: Rework fault injection machinery
The packet fault injection code present in the HFI1 driver had some
issues which not only fragment the code but also created user
confusion. Furthermore, it suffered from the following issues:
1. The fault_packet method only worked for received packets. This
meant that the only fault injection mode available for sent
packets is fault_opcode, which did not allow for random packet
drops on all egressing packets.
2. The mask available for the fault_opcode mode did not really work
due to the fact that the opcode values are not bits in a bitmask but
rather sequential integer values. Creating a opcode/mask pair that
would successfully capture a set of packets was nearly impossible.
3. The code was fragmented and used too many debugfs entries to
operate and control. This was confusing to users.
4. It did not allow filtering fault injection on a per direction basis -
egress vs. ingress.
In order to improve or fix the above issues, the following changes have
been made:
1. The fault injection methods have been combined into a single fault
injection facility. As such, the fault injection has been plugged
into both the send and receive code paths. Regardless of method used
the fault injection will operate on both egress and ingress packets.
2. The type of fault injection - by packet or by opcode - is now controlled
by changing the boolean value of the file "opcode_mode". When the value
is set to True, fault injection is done by opcode. Otherwise, by
packet.
2. The masking ability has been removed in favor of a bitmap that holds
opcodes of interest (one bit per opcode, a total of 256 bits). This
works in tandem with the "opcode_mode" value. When the value of
"opcode_mode" is False, this bitmap is ignored. When the value is
True, the bitmap lists all opcodes to be considered for fault injection.
By default, the bitmap is empty. When the user wants to filter by opcode,
the user sets the corresponding bit in the bitmap by echo'ing the bit
position into the 'opcodes' file. This gets around the issue that the set
of opcodes does not lend itself to effective masks and allow for extremely
fine-grained filtering by opcode.
4. fault_packet and fault_opcode methods have been combined. Hence, there
is only one debugfs directory controlling the entire operation of the
fault injection machinery. This reduces the number of debugfs entries
and provides a more unified user experience.
5. A new control files - "direction" - is provided to allow the user to
control the direction of packets, which are subject to fault injection.
6. A new control file - "skip_usec" - is added that would allow the user
to specify a "timeout" during which no fault injection will occur.
In addition, the following bug fixes have been applied:
1. The fault injection code has been split into its own header and source
files. This was done to better organize the code and support conditional
compilation without littering the code with #ifdef's.
2. The method by which the TX PIO packets were being marked for drop
conflicted with the way send contexts were being setup. As a result,
the send context was repeatedly being reset.
3. The fault injection only makes sense when the user can control it
through the debugfs entries. However, a kernel configuration can
enable fault injection but keep fault injection debugfs entries
disabled. Therefore, it makes sense that the HFI fault injection
code depends on both.
4. Error suppression did not take into account the method by which PIO
packets were being dropped. Therefore, even with error suppression
turned on, errors would still be displayed to the screen. A larger
enough packet drop percentage would case the kernel to crash because
the driver would be stuck printing errors.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Alex Estrin [Wed, 2 May 2018 13:43:15 +0000 (06:43 -0700)]
IB/{hfi1, qib}: Add handling of kernel restart
A warm restart will fail to unload the driver, leaving link state
potentially flapping up to the point the BIOS resets the adapter.
Correct the issue by hooking the shutdown pci method,
which will bring port down.
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Wed, 2 May 2018 13:43:07 +0000 (06:43 -0700)]
IB/hfi1: Reorder incorrect send context disable
User send context integrity bits are cleared before the context is
disabled. If the send context is still processing data, any packets
that need those integrity bits will cause an error and halt the send
context.
During the disable handling, the driver waits for the context to drain.
If the context is halted, the driver will eventually timeout because
the context won't drain and then incorrectly bounce the link.
Reorder the bit clearing and the context disable.
Examine the software state and send context status as well as the
egress status to determine if a send context is in the halted state.
Promote the check macros to static functions for consistency with the
new check and to follow kernel style.
Remove an unused define that refers to the egress timeout.
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Wed, 2 May 2018 13:42:59 +0000 (06:42 -0700)]
IB/hfi1: Return correct value for device state
The driver_pstate() function is used to map internal driver state
information to externally defined states.
The VERIFY_CAP and GOING_UP states are config/training states, but
the mapping routing returns the POLLING value.
Update the return values for VERIFY_CAP and GOING_UP to return the
correct value: TRAINING.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mike Marciniszyn [Wed, 2 May 2018 13:42:44 +0000 (06:42 -0700)]
IB/hfi1: Fix fault injection init/exit issues
There are config dependent code paths that expose panics in unload
paths both in this file and in debugfs_remove_recursive() because
CONFIG_FAULT_INJECTION and CONFIG_FAULT_INJECTION_DEBUG_FS can be
set independently.
Having CONFIG_FAULT_INJECTION set and CONFIG_FAULT_INJECTION_DEBUG_FS
reset causes fault_create_debugfs_attr() to return an error.
The debugfs.c routines tolerate failures, but the module unload panics
dereferencing a NULL in the two exit routines. If that is fixed, the
dir passed to debugfs_remove_recursive comes from a memory location
that was freed and potentially reused causing a segfault or corrupting
memory.
Here is an example of the NULL deref panic:
[66866.286829] BUG: unable to handle kernel NULL pointer dereference at
0000000000000088
[66866.295602] IP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1]
[66866.301138] PGD
858496067 P4D
858496067 PUD
8433a7067 PMD 0
[66866.307452] Oops: 0000 [#1] SMP
[66866.310953] Modules linked in: hfi1(-) rdmavt rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm iw_cm ib_cm ib_core rpcsec_gss_krb5 nfsv4 dns_resolver nfsv3 nfs fscache sb_edac x86_pkg_temp_thermal intel_powerclamp vfat fat coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt iTCO_vendor_support crypto_simd mei_me glue_helper cryptd mxm_wmi ipmi_si pcspkr lpc_ich sg mei ioatdma ipmi_devintf i2c_i801 mfd_core shpchp ipmi_msghandler wmi acpi_power_meter acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt igb fb_sys_fops ttm ahci ptp crc32c_intel libahci pps_core drm dca libata i2c_algo_bit i2c_core [last unloaded: opa_vnic]
[66866.385551] CPU: 8 PID: 7470 Comm: rmmod Not tainted 4.14.0-mam-tid-rdma #2
[66866.393317] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.
072020161249 07/20/2016
[66866.405252] task:
ffff88084f28c380 task.stack:
ffffc90008454000
[66866.411866] RIP: 0010:hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1]
[66866.417984] RSP: 0018:
ffffc90008457da0 EFLAGS:
00010202
[66866.423812] RAX:
0000000000000000 RBX:
ffff880857de0000 RCX:
0000000180040001
[66866.431773] RDX:
0000000180040002 RSI:
ffffea0021088200 RDI:
0000000040000000
[66866.439734] RBP:
ffffc90008457da8 R08:
ffff88084220e000 R09:
0000000180040001
[66866.447696] R10:
000000004220e001 R11:
ffff88084220e000 R12:
ffff88085a31c000
[66866.455657] R13:
ffffffffa07c9820 R14:
ffffffffa07c9890 R15:
ffff881059d78100
[66866.463618] FS:
00007f6876047740(0000) GS:
ffff88085f800000(0000) knlGS:
0000000000000000
[66866.472644] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[66866.479053] CR2:
0000000000000088 CR3:
0000000856357006 CR4:
00000000001606e0
[66866.487013] Call Trace:
[66866.489747] remove_one+0x1f/0x220 [hfi1]
[66866.494221] pci_device_remove+0x39/0xc0
[66866.498596] device_release_driver_internal+0x141/0x210
[66866.504424] driver_detach+0x3f/0x80
[66866.508409] bus_remove_driver+0x55/0xd0
[66866.512784] driver_unregister+0x2c/0x50
[66866.517164] pci_unregister_driver+0x2a/0xa0
[66866.521934] hfi1_mod_cleanup+0x10/0xaa2 [hfi1]
[66866.526988] SyS_delete_module+0x171/0x250
[66866.531558] do_syscall_64+0x67/0x1b0
[66866.535644] entry_SYSCALL64_slow_path+0x25/0x25
[66866.540792] RIP: 0033:0x7f6875525c27
[66866.544777] RSP: 002b:
00007ffd48528e78 EFLAGS:
00000206 ORIG_RAX:
00000000000000b0
[66866.553224] RAX:
ffffffffffffffda RBX:
0000000001cc01d0 RCX:
00007f6875525c27
[66866.561185] RDX:
00007f6875596000 RSI:
0000000000000800 RDI:
0000000001cc0238
[66866.569146] RBP:
0000000000000000 R08:
00007f68757e9060 R09:
00007f6875596000
[66866.577120] R10:
00007ffd48528c00 R11:
0000000000000206 R12:
00007ffd48529db4
[66866.585080] R13:
0000000000000000 R14:
0000000001cc01d0 R15:
0000000001cc0010
[66866.593040] Code: 90 0f 1f 44 00 00 48 83 3d a3 8b 03 00 00 55 48 89 e5 53 48 89 fb 74 4e 48 8d bf 18 0c 00 00 e8 9d f2 ff ff 48 8b 83 20 0c 00 00 <48> 8b b8 88 00 00 00 e8 2a 21 b3 e0 48 8b bb 20 0c 00 00 e8 0e
[66866.614127] RIP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] RSP:
ffffc90008457da0
[66866.621885] CR2:
0000000000000088
[66866.625618] ---[ end trace
c4817425783fb092 ]---
Fix by insuring that upon failure from fault_create_debugfs_attr() the
parent pointer for the routines is always set to NULL and guards added
in the exit routines to insure that debugfs_remove_recursive() is not
called when when the parent pointer is NULL.
Fixes: 0181ce31b260 ("IB/hfi1: Add receive fault injection feature")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Alex Estrin [Wed, 2 May 2018 13:42:36 +0000 (06:42 -0700)]
IB/hfi1: Complete check for locally terminated smp
For lid routed packets 'hop_cnt' is zero, therefore current
test is incomplete. Fix it by using local mad check for
both lid routed and direct routed MADs.
Reviewed-by: Mike Mariciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Wed, 2 May 2018 13:42:29 +0000 (06:42 -0700)]
IB/hfi1: Return actual error value from program_rcvarray()
A failure of program_rcvarray() is treated inconsistently by the
calling function. In one case the error is returned, in a second
case, the error is overwritten with EFAULT. In both cases the
code path is doing the same thing, allocating memory for groups,
so it should be consistent.
Make the error path consistent and return the error generated by
program_rcvarray().
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body")
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Sanchez [Wed, 2 May 2018 13:42:21 +0000 (06:42 -0700)]
IB/hfi1: Prevent LNI hang when LCB can't obtain lanes
When the LCB isn't able to get any lanes operational on the
first transition into mission mode, the link transfer active
never happens and the LNI stays in the polling state indefinitely.
Reset LCB upon receiving an 8051 interrupt for LCB to try to obtain
lanes with firmware version 1.25.0 or later. Also, update the LCB
reset value in other parts of the code with a macro defined to make
the code more maintainable and rename functions with the link_width
label to link_mode to reflect the fact that those functions set and
read link related data not just the link width.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Wed, 9 May 2018 19:48:48 +0000 (15:48 -0400)]
Merge branch 'k.o/for-rc' into k.o/wip/dl-for-next
Several items of conflict have arisen between the RDMA stack's for-rc
branch and upcoming for-next work:
9fd4350ba895 ("IB/rxe: avoid double kfree_skb") directly conflicts with
2e47350789eb ("IB/rxe: optimize the function duplicate_request")
Patches already submitted by Intel for the hfi1 driver will fail to
apply cleanly without this merge
Other people on the mailing list have notified that their upcoming
patches also fail to apply cleanly without this merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
Idan Burstein [Wed, 2 May 2018 10:16:39 +0000 (13:16 +0300)]
IB/mlx5: posting klm/mtt list inline in the send queue for reg_wr
As most kernel RDMA ULPs, (e.g. NVMe over Fabrics in its default
"register_always=Y" mode) registers and invalidates user buffer
upon each IO.
Today the mlx5 driver is posting the registration work
request using scatter/gather entry for the MTT/KLM list.
The fetch of the MTT/KLM list becomes the bottleneck in
number of IO operation could be done by NVMe over Fabrics
host driver on a single adapter as shown below.
This patch is adding the support for inline registration
work request upon MTT/KLM list of size <=64B.
The result for NVMe over Fabrics is increase of > x3.5 for small
IOs as shown below, I expect other ULPs (e.g iSER, SRP, NFS over RDMA)
performance to be enhanced as well.
The following results were taken against a single NVMe-oF (RoCE link layer)
subsystem with a single namespace backed by null_blk using fio benchmark
(with rw=randread, numjobs=48, iodepth={16,64}, ioengine=libaio direct=1):
ConnectX-5 (pci Width x16)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1302.8K/34.82% 4951.9K/99.02%
1KB 1284.3K/33.86% 4232.7K/98.09%
2KB 1238.6K/34.1% 2797.5K/80.04%
4KB 1169.3K/32.46% 1941.3K/61.35%
8KB 1013.4K/30.08% 1236.6K/39.47%
16KB 695.7K/20.19% 696.9K/20.59%
32KB 350.3K/9.64% 350.6K/10.3%
64KB 175.86K/5.27% 175.9K/5.28%
ConnectX-4 (pci Width x8)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1285.8K/42.66% 4242.7K/98.18%
1KB 1254.1K/41.74% 3569.2K/96.00%
2KB 1185.9K/39.83% 2173.9K/75.58%
4KB 1069.4K/36.46% 1343.3K/47.47%
8KB 755.1K/27.77% 748.7K/29.14%
Tested-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Wed, 2 May 2018 10:15:24 +0000 (13:15 +0300)]
RDMA/hns: Drop local zgid in favor of core defined variable
The zgid is already provided by IB/core, so there is no need in locally
defined variable, let's drop it and reuse common one.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parav Pandit [Wed, 2 May 2018 10:12:56 +0000 (13:12 +0300)]
IB/core: Reuse gid_table_release_one() in table allocation failure
_gid_table_setup_one() only performs GID table cache memory allocation,
marks entries as invalid (free) and marks the reserved entries.
At this point GID table is empty and no entries are added.
On dual port device if _gid_table_setup_one() fails to allocate the gid
table for 2nd port, there is no need to perform cleanup_gid_table_port()
to delete GID entries, as GID table is empty.
Therefore make use of existing gid_table_release_one() routine which
frees the GID table memory and avoid code duplication.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parav Pandit [Wed, 2 May 2018 10:12:55 +0000 (13:12 +0300)]
IB/core: Make gid_table_reserve_default() return void
gid_table_reserve_default() always returns zero. Make it return void and
simplify error checking.
rdma_port is already calculated, use that while calling
gid_table_reserve_default() instead of recalculating it.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Christophe Jaillet [Tue, 8 May 2018 05:44:27 +0000 (07:44 +0200)]
iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()'
The error handling path of 'c4iw_get_dma_mr()' does not free resources
in the correct order.
If an error occures, it can leak 'mhp->wr_waitp'.
Fixes: a3f12da0e99a ("iw_cxgb4: allocate wait object for each memory object")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Andrew Boyer [Mon, 7 May 2018 17:23:38 +0000 (13:23 -0400)]
RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint
The current code sets an affinity hint with a cpumask_t stored on the
stack. This value can then be accessed through /proc/irq/*/affinity_hint/,
causing a segfault or returning corrupt data.
Move the cpumask_t into struct i40iw_msix_vector so it is available later.
Backtrace:
BUG: unable to handle kernel paging request at
ffffb16e600e7c90
IP: irq_affinity_hint_proc_show+0x60/0xf0
PGD
17c0c6d067
PUD
17c0c6e067
PMD
15d4a0e067
PTE 0
Oops: 0000 [#1] SMP
Modules linked in: ...
CPU: 3 PID: 172543 Comm: grep Tainted: G OE ... #1
Hardware name: ...
task:
ffff9a5caee08000 task.stack:
ffffb16e659d8000
RIP: 0010:irq_affinity_hint_proc_show+0x60/0xf0
RSP: 0018:
ffffb16e659dbd20 EFLAGS:
00010086
RAX:
0000000000000246 RBX:
ffffb16e659dbd20 RCX:
0000000000000000
RDX:
ffffb16e600e7c90 RSI:
0000000000000003 RDI:
0000000000000046
RBP:
ffffb16e659dbd88 R08:
0000000000000038 R09:
0000000000000001
R10:
0000000070803079 R11:
0000000000000000 R12:
ffff9a59d1d97a00
R13:
ffff9a5da47a6cd8 R14:
ffff9a5da47a6c00 R15:
ffff9a59d1d97a00
FS:
00007f946c31d740(0000) GS:
ffff9a5dc1800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffb16e600e7c90 CR3:
00000016a4339000 CR4:
00000000007406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
seq_read+0x12d/0x430
? sched_clock_cpu+0x11/0xb0
proc_reg_read+0x48/0x70
__vfs_read+0x37/0x140
? security_file_permission+0xa0/0xc0
vfs_read+0x96/0x140
SyS_read+0x58/0xc0
do_syscall_64+0x5a/0x190
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7f946bbc97e0
RSP: 002b:
00007ffdd0c4ae08 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
RAX:
ffffffffffffffda RBX:
000000000096b000 RCX:
00007f946bbc97e0
RDX:
000000000096b000 RSI:
00007f946a2f0000 RDI:
0000000000000004
RBP:
0000000000001000 R08:
00007f946a2ef011 R09:
000000000000000a
R10:
0000000000001000 R11:
0000000000000246 R12:
00007f946a2f0000
R13:
0000000000000004 R14:
0000000000000000 R15:
00007f946a2f0000
Code: b9 08 00 00 00 49 89 c6 48 89 df 31 c0 4d 8d ae d8 00 00 00 f3 48 ab 4c 89 ef e8 6c 9a 56 00 49 8b 96 30 01 00 00 48 85 d2 74 3f <48> 8b 0a 48 89 4d 98 48 8b 4a 08 48 89 4d a0 48 8b 4a 10 48 89
RIP: irq_affinity_hint_proc_show+0x60/0xf0 RSP:
ffffb16e659dbd20
CR2:
ffffb16e600e7c90
Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Andrew Boyer [Mon, 7 May 2018 17:23:37 +0000 (13:23 -0400)]
RDMA/i40iw: Avoid reference leaks when processing the AEQ
In this switch there is a reference held on the QP. 'continue' will grab
the next event without releasing the reference, causing a leak.
Change it to 'break' to drop the reference before grabbing the next event.
Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Andrew Boyer [Mon, 7 May 2018 17:23:36 +0000 (13:23 -0400)]
RDMA/i40iw: Avoid panic when objects are being created and destroyed
A panic occurs when there is a newly-registered element on the QP/CQ MR
list waiting to be attached, but a different MR is deregistered. The
current code only checks for whether the list is empty, not whether the
element being deregistered is actually on the list.
Fix the panic by adding a boolean to track if the object is on the list.
Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:13 +0000 (10:57 +0800)]
RDMA/hns: Fix the bug with NULL pointer
When the last QP of eight QPs is not exist in
hns_roce_v1_mr_free_work_fn function, the
print for qpn of hr_qp may introduce a
calltrace for NULL pointer.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
oulijun [Fri, 4 May 2018 02:57:12 +0000 (10:57 +0800)]
RDMA/hns: Set NULL for __internal_mr
This patch mainly configure value for __internal_mr of mr_free_pd.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
projects / openwrt / staging / blogic.git / log