Vasilis Tsiligiannis [Sun, 5 Feb 2012 17:56:04 +0000 (17:56 +0000)]
generic: Enable HPET, HID and AT keyboard support
SVN-Revision: 30309
Vasilis Tsiligiannis [Sat, 4 Feb 2012 20:45:17 +0000 (20:45 +0000)]
generic: Add missing and remove unused config symbols
SVN-Revision: 30133
Jonas Gorski [Sat, 4 Feb 2012 10:17:27 +0000 (10:17 +0000)]
brcm63xx: add support for linux 3.3
SVN-Revision: 30027
Jonas Gorski [Sat, 4 Feb 2012 10:17:14 +0000 (10:17 +0000)]
kernel: fix netfilter layer7 compilation in 3.3
SVN-Revision: 30026
Jonas Gorski [Fri, 3 Feb 2012 20:17:00 +0000 (20:17 +0000)]
x86: make alix platform patch apply to 3.3
Based on a patch from Philip Prindeville.
While at it, also refresh the patches.
SVN-Revision: 30025
Jo-Philipp Wich [Fri, 3 Feb 2012 19:47:55 +0000 (19:47 +0000)]
disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config
SVN-Revision: 30024
Jo-Philipp Wich [Fri, 3 Feb 2012 19:21:41 +0000 (19:21 +0000)]
x86: trivial -- add missing CONFIG_GEOS symbol to top-level So that builds don't stall in x86 prompting for this symbol. [From Philip Prindeville, via patchwork.openwrt.org/patch/1828/]
SVN-Revision: 30023
Jo-Philipp Wich [Fri, 3 Feb 2012 18:16:27 +0000 (18:16 +0000)]
geos: backport driver from linux-next to 3.2 and 3.3 The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30022
Jo-Philipp Wich [Fri, 3 Feb 2012 18:14:02 +0000 (18:14 +0000)]
net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30021
Jo-Philipp Wich [Fri, 3 Feb 2012 18:12:30 +0000 (18:12 +0000)]
leds.mk: remove obsolete references to leds-alix and leds-net5501 modules These are now supported by platform drivers in arch/x86/platform/geode. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30020
Jo-Philipp Wich [Fri, 3 Feb 2012 18:02:57 +0000 (18:02 +0000)]
x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30019
Jo-Philipp Wich [Fri, 3 Feb 2012 14:19:29 +0000 (14:19 +0000)]
net5501: adjust CFLAGS and package selection (#10893) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in.
SVN-Revision: 30013
Felix Fietkau [Fri, 3 Feb 2012 10:23:55 +0000 (10:23 +0000)]
ath9k: fix CTS timeout issues in 2.4 ghz
SVN-Revision: 30010
Felix Fietkau [Fri, 3 Feb 2012 10:23:51 +0000 (10:23 +0000)]
ath9k: fix WEP connection issues
SVN-Revision: 30009
Felix Fietkau [Fri, 3 Feb 2012 10:17:30 +0000 (10:17 +0000)]
netifd: set the network device in uci state as well to avoid further remapping issues
SVN-Revision: 30008
Felix Fietkau [Fri, 3 Feb 2012 09:44:51 +0000 (09:44 +0000)]
ar71xx: add usb on the pb92 board
SVN-Revision: 30007
Felix Fietkau [Thu, 2 Feb 2012 23:16:34 +0000 (23:16 +0000)]
netifd: update to latest, fixes removing deleted interfaces on config reload
SVN-Revision: 30004
Felix Fietkau [Thu, 2 Feb 2012 23:01:02 +0000 (23:01 +0000)]
netifd: fix legacy scripts that expect the ifname option to be mapped to the device option after fixup
SVN-Revision: 30003
Jonas Gorski [Thu, 2 Feb 2012 21:01:59 +0000 (21:01 +0000)]
x86: add 3.3 generic symbols
Copy x86/config-3.2 to x86/config-3.3 and add additional symbols (for 3.3-rc2).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30002
Jo-Philipp Wich [Thu, 2 Feb 2012 19:26:32 +0000 (19:26 +0000)]
alix2: backport platform driver updates from linux-next Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4). [Patch from Philipp Prindeville, via patchwork.openwrt.org/patch/1817/]
SVN-Revision: 30001
Jo-Philipp Wich [Thu, 2 Feb 2012 19:11:52 +0000 (19:11 +0000)]
alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility
SVN-Revision: 30000
Jo-Philipp Wich [Thu, 2 Feb 2012 19:06:22 +0000 (19:06 +0000)]
alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad
SVN-Revision: 29999
Jo-Philipp Wich [Thu, 2 Feb 2012 19:00:40 +0000 (19:00 +0000)]
alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest
SVN-Revision: 29998
Jo-Philipp Wich [Thu, 2 Feb 2012 18:59:51 +0000 (18:59 +0000)]
geos: add missing files from previous commit
SVN-Revision: 29997
Jo-Philipp Wich [Thu, 2 Feb 2012 18:58:20 +0000 (18:58 +0000)]
geos: backport Geos driver from linux-next Backport of linux-next driver. Driver adds support for LEDS and S/W button. Add hotplug script for button actions. Add Openwrt system config for LEDS triggers. Add updated kernel .config for 3.2 symbols. [Patch from Philipp Prindeville, via patchwork.openwrt.org/patch/1816/]
SVN-Revision: 29996
Jo-Philipp Wich [Thu, 2 Feb 2012 18:44:35 +0000 (18:44 +0000)]
geos: cleanup GPIO driver name In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete. Make Geos use a recent kernel and remove this ambiguity. [Patch from Philipp Prindeville, via patchwork.openwrt.org/patch/1815/]
SVN-Revision: 29995
Jo-Philipp Wich [Thu, 2 Feb 2012 18:41:10 +0000 (18:41 +0000)]
net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via patchwork.openwrt.org/patch/1802/]
SVN-Revision: 29994
Jo-Philipp Wich [Thu, 2 Feb 2012 14:06:16 +0000 (14:06 +0000)]
iwinfo: fix segmentation fault when doing two consecutive scans through wpa_supplicant Based on patch by Christian Kapeller <christian.kapeller@cmotion.eu> with one minor whitespace change and updated package version.
SVN-Revision: 29992
Jonas Gorski [Thu, 2 Feb 2012 08:23:54 +0000 (08:23 +0000)]
kernel: add preliminary support for linux 3.3
Based on 3.3-rc2
SVN-Revision: 29986
Jonas Gorski [Thu, 2 Feb 2012 08:23:44 +0000 (08:23 +0000)]
kernel: update module names and add new config symbols for linux 3.3
SVN-Revision: 29985
Jo-Philipp Wich [Wed, 1 Feb 2012 15:31:23 +0000 (15:31 +0000)]
alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver.
[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/]
SVN-Revision: 29981
Jo-Philipp Wich [Wed, 1 Feb 2012 15:06:36 +0000 (15:06 +0000)]
automake: forcibly disable perl ithreads support The SDK when build on a machine with perl ithreads enabled will fail to run on many Gentoo systems because perl is usually built without thread capability there. In order to circumvent this issue forcibly disable the ithreads support, tested on CentOS 5.6, Ubuntu 10.04 LTS and Gentoo.
SVN-Revision: 29979
Gabor Juhos [Tue, 31 Jan 2012 20:49:34 +0000 (20:49 +0000)]
ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards
SVN-Revision: 29978
Gabor Juhos [Tue, 31 Jan 2012 18:37:29 +0000 (18:37 +0000)]
ar71xx: merge DIR-600 A1 and DIR-615 E4 support
SVN-Revision: 29976
Gabor Juhos [Tue, 31 Jan 2012 18:37:24 +0000 (18:37 +0000)]
ar71xx: fix ethernet LEDs on the DIR-600-A1 board
SVN-Revision: 29975
Gabor Juhos [Tue, 31 Jan 2012 18:37:15 +0000 (18:37 +0000)]
ar71xx: unify LED names on D-Link boards
SVN-Revision: 29974
Gabor Juhos [Tue, 31 Jan 2012 18:37:09 +0000 (18:37 +0000)]
ar71xx: support for D-LINK DIR-615 rev. E4
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.
It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.
[juhosg: add 3.2 support]
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
SVN-Revision: 29973
Gabor Juhos [Tue, 31 Jan 2012 18:37:01 +0000 (18:37 +0000)]
ar71xx: add support for TP-Link TL-MR11U
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.
Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade
[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]
Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>
SVN-Revision: 29972
Gabor Juhos [Tue, 31 Jan 2012 18:36:54 +0000 (18:36 +0000)]
ar71xx: compress kernel binaries in Image/Prepare stage
The lzma compressed kernel is used by one of the loaders.
SVN-Revision: 29971
Gabor Juhos [Tue, 31 Jan 2012 18:36:51 +0000 (18:36 +0000)]
ar71xx: use dynamically allocated partitions in wrt160nl_part
SVN-Revision: 29970
Gabor Juhos [Tue, 31 Jan 2012 18:34:10 +0000 (18:34 +0000)]
ramips: change vlan_config for the ALFA W502U board
This change moves the WAN port into a separate VLAN.
SVN-Revision: 29969
Jonas Gorski [Tue, 31 Jan 2012 09:44:00 +0000 (09:44 +0000)]
kernel: update linux 3.2 to 3.2.2
SVN-Revision: 29967
Jonas Gorski [Tue, 31 Jan 2012 09:43:57 +0000 (09:43 +0000)]
kernel: update linux 3.1 to 3.1.10
SVN-Revision: 29966
Jonas Gorski [Tue, 31 Jan 2012 09:43:53 +0000 (09:43 +0000)]
kernel: update linux 3.0 to 3.0.18
SVN-Revision: 29965
Florian Fainelli [Mon, 30 Jan 2012 21:12:32 +0000 (21:12 +0000)]
build 96348R images
SVN-Revision: 29960
Florian Fainelli [Mon, 30 Jan 2012 21:12:28 +0000 (21:12 +0000)]
remove support for 2.6.39
SVN-Revision: 29959
Florian Fainelli [Mon, 30 Jan 2012 21:12:25 +0000 (21:12 +0000)]
bump to 3.0.17
SVN-Revision: 29958
Florian Fainelli [Mon, 30 Jan 2012 14:02:13 +0000 (14:02 +0000)]
fix wprobe build for arm on 3.2
SVN-Revision: 29957
Florian Fainelli [Mon, 30 Jan 2012 14:02:10 +0000 (14:02 +0000)]
ebtales: update to v2.0.10-4
SVN-Revision: 29956
Florian Fainelli [Mon, 30 Jan 2012 10:53:20 +0000 (10:53 +0000)]
add missing config symbols
Thanks KanjiMonster
SVN-Revision: 29955
Florian Fainelli [Mon, 30 Jan 2012 10:53:16 +0000 (10:53 +0000)]
fix gpiommc build failure with 3.2
SVN-Revision: 29954
Jo-Philipp Wich [Mon, 30 Jan 2012 02:13:37 +0000 (02:13 +0000)]
create a config-3.2 for upcoming changes, rebase config-default to 2.6.39
SVN-Revision: 29953
Jo-Philipp Wich [Sun, 29 Jan 2012 23:34:25 +0000 (23:34 +0000)]
rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems
SVN-Revision: 29951
Jo-Philipp Wich [Sun, 29 Jan 2012 20:19:06 +0000 (20:19 +0000)]
patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that
SVN-Revision: 29948
Jo-Philipp Wich [Sun, 29 Jan 2012 19:28:12 +0000 (19:28 +0000)]
download.pl: remove ftp.geo. mirror, it does not resolve
SVN-Revision: 29947
Jo-Philipp Wich [Sun, 29 Jan 2012 18:53:12 +0000 (18:53 +0000)]
ext-toolchain.sh: rework generated gcc wrapper Only append -L and -Wl,-rpath-link flags if the command line contains -l, -L, -shared or -static flags; this is needed to suppress "-rpath-link: linker input file unused because linking not done" on each cc invocation.
SVN-Revision: 29946
Jo-Philipp Wich [Sun, 29 Jan 2012 17:42:58 +0000 (17:42 +0000)]
patch-specs.sh: fallback to ext-toolchain.sh --wrap if spec file patching is not possible (gcc < 4.3.0)
SVN-Revision: 29945
Jo-Philipp Wich [Sun, 29 Jan 2012 17:42:10 +0000 (17:42 +0000)]
ext-toolchain.sh: support --wrap with src == dest
SVN-Revision: 29944
Florian Fainelli [Sun, 29 Jan 2012 15:00:36 +0000 (15:00 +0000)]
add default and Sim.One profiles
SVN-Revision: 29942
Florian Fainelli [Sun, 29 Jan 2012 15:00:33 +0000 (15:00 +0000)]
add 3.2 support
SVN-Revision: 29941
Florian Fainelli [Sun, 29 Jan 2012 15:00:29 +0000 (15:00 +0000)]
add another 3.2 framebuffer symbol
SVN-Revision: 29940
Florian Fainelli [Sun, 29 Jan 2012 15:00:25 +0000 (15:00 +0000)]
add support for 3.2 kernel
SVN-Revision: 29939
Hauke Mehrtens [Sat, 28 Jan 2012 13:52:37 +0000 (13:52 +0000)]
switch: fix some memory leaks in switch_parse_vlan()
SVN-Revision: 29936
Florian Fainelli [Sat, 28 Jan 2012 13:19:49 +0000 (13:19 +0000)]
add support for the Atheros AP113 reference board
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch
SVN-Revision: 29935
Florian Fainelli [Sat, 28 Jan 2012 13:19:43 +0000 (13:19 +0000)]
refresh 3.2 patches
SVN-Revision: 29934
Jo-Philipp Wich [Sat, 28 Jan 2012 04:42:15 +0000 (04:42 +0000)]
autoconf: another relocatability fix for autom4te, substitute hardcoded prefix with $STAGING_DIR when reading autom4te.cfg
SVN-Revision: 29931
Jo-Philipp Wich [Sat, 28 Jan 2012 03:51:22 +0000 (03:51 +0000)]
automake: generate relative aclocal symlinks in staging_dir
SVN-Revision: 29929
Jo-Philipp Wich [Sat, 28 Jan 2012 03:30:30 +0000 (03:30 +0000)]
make sure .config gets copied as file When using scripts/env, .config is most likely a symbolic link pointing to env/.config. Previously the symbolic link got copied as-is into the SDK tarball, leading to a dangling .config symlink on the target system which prevented the SDK from working.
SVN-Revision: 29927
Hauke Mehrtens [Fri, 27 Jan 2012 20:10:51 +0000 (20:10 +0000)]
brcm47xx: add fix for cardbus host controller
These devices have two devices on the bus, the host controller itself and the device.
SVN-Revision: 29923
Hauke Mehrtens [Fri, 27 Jan 2012 20:08:49 +0000 (20:08 +0000)]
mac80211: fix patch when running on ssb based devices
SVN-Revision: 29922
Felix Fietkau [Fri, 27 Jan 2012 15:35:29 +0000 (15:35 +0000)]
ath9k: revert one more linux upstream commit in the initvals to fully fix the ar938x tx power issue
SVN-Revision: 29920
Felix Fietkau [Fri, 27 Jan 2012 11:06:32 +0000 (11:06 +0000)]
ath9k: fix initvals for high-power ar938x devices, fixes tx power on buffalo wzr-hp-g450h
SVN-Revision: 29918
Gabor Juhos [Fri, 27 Jan 2012 10:42:41 +0000 (10:42 +0000)]
ar71xx: use 64k block size for WZR-HP-AG300H
SVN-Revision: 29917
Gabor Juhos [Fri, 27 Jan 2012 07:51:09 +0000 (07:51 +0000)]
ar71xx: fix sysupgrade image building of atheros boards after r29899
SVN-Revision: 29916
Gabor Juhos [Thu, 26 Jan 2012 21:28:34 +0000 (21:28 +0000)]
ar71xx: create the temporary directory before building initramfs images
Thanks to Florian for reporting.
SVN-Revision: 29915
Gabor Juhos [Thu, 26 Jan 2012 17:01:44 +0000 (17:01 +0000)]
ar71xx: create a profile and build images for Compex WPE72
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 29914
Gabor Juhos [Thu, 26 Jan 2012 17:01:43 +0000 (17:01 +0000)]
firmware-utils/mkmylofw: add WPE72 support
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 29913
Gabor Juhos [Thu, 26 Jan 2012 17:01:41 +0000 (17:01 +0000)]
ar71xx: add support for Compex WPE72/WPE72NX
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.
[juhosg: add support to 3.2 as well]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 29912
Gabor Juhos [Thu, 26 Jan 2012 17:01:38 +0000 (17:01 +0000)]
generic: add WPE72 ID to myloader.h
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 29911
Gabor Juhos [Thu, 26 Jan 2012 10:44:23 +0000 (10:44 +0000)]
ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.
There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.
Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt
[juhosg: reordered some parts in order to keep things sorted
alphabetically]
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
SVN-Revision: 29910
Gabor Juhos [Wed, 25 Jan 2012 07:44:46 +0000 (07:44 +0000)]
mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb
Hi!
On Mon, Nov 14, 2011 at 03:01:34PM +0100, Daniel Golle wrote:
> The driver works quite nice and stable for me using a RaLink Rt5370 USB device.
>
> Signed-off-by: Daniel Golle <dgolle@allnet.de>
>
> Index: package/mac80211/Makefile
> ===================================================================
> --- package/mac80211/Makefile (revision 29114)
> +++ package/mac80211/Makefile (working copy)
> @@ -1147,6 +1147,7 @@
> CONFIG_RT2800_LIB=$(if $(CONFIG_PACKAGE_kmod-rt2800-lib),m) \
> CONFIG_RT2800PCI=$(if $(CONFIG_PACKAGE_kmod-rt2800-pci),m) \
> CONFIG_RT2800USB=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),m) \
> + CONFIG_RT2800USB_RT53XX=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),y) \
> CONFIG_RTL8180=$(if $(CONFIG_PACKAGE_kmod-rtl8180),m) \
> CONFIG_RTL8187=$(if $(CONFIG_PACKAGE_kmod-rtl8187),m) \
> CONFIG_RTL8192CE= \
Aparently this was wrong, CONFIG_RT2800USB_RT53XX is supposed to live in
BUILDARGS rather than MAKE_OPTS to actually get support for the Rt5370.
Thanks to actmnophn for the hint!
This reverts changeset 29116 and adds it to the right section in the Makefile.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29906
Gabor Juhos [Wed, 25 Jan 2012 07:44:45 +0000 (07:44 +0000)]
ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour
This patch fixes the board detection of the TL-MR3020.
The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.
The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.
[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
SVN-Revision: 29905
Gabor Juhos [Wed, 25 Jan 2012 07:44:43 +0000 (07:44 +0000)]
ar71xx: TL-MR3020: fix GPIO polarity for button and switch
This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
SVN-Revision: 29904
Felix Fietkau [Tue, 24 Jan 2012 21:44:00 +0000 (21:44 +0000)]
netifd: update to latest, fixes a crash when the interface protocol was not specified
SVN-Revision: 29903
Jo-Philipp Wich [Tue, 24 Jan 2012 20:54:13 +0000 (20:54 +0000)]
hostapd: introduce a client_cert option which is passed on to wpa_supplicant (#8876)
SVN-Revision: 29901
Gabor Juhos [Tue, 24 Jan 2012 20:12:10 +0000 (20:12 +0000)]
ar71xx: use the lzma loader on the Planex boards
SVN-Revision: 29900
Gabor Juhos [Tue, 24 Jan 2012 20:12:08 +0000 (20:12 +0000)]
ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage
SVN-Revision: 29899
Gabor Juhos [Tue, 24 Jan 2012 18:40:38 +0000 (18:40 +0000)]
ar71xx: fix the AP/Router LED definitons on MZK-W300NH
SVN-Revision: 29897
Gabor Juhos [Tue, 24 Jan 2012 18:40:36 +0000 (18:40 +0000)]
ar71xx: preset WLAN LED config on MZK-W300NH
SVN-Revision: 29896
Gabor Juhos [Tue, 24 Jan 2012 18:40:34 +0000 (18:40 +0000)]
ar71xx: remove hardcoded MTD layout from planex files
SVN-Revision: 29895
Gabor Juhos [Tue, 24 Jan 2012 18:40:33 +0000 (18:40 +0000)]
ar71xx: pass mtdlayout to Planex boards via command line
SVN-Revision: 29894
Gabor Juhos [Tue, 24 Jan 2012 18:40:31 +0000 (18:40 +0000)]
ar71xx: remove an unused header file
SVN-Revision: 29893
Gabor Juhos [Tue, 24 Jan 2012 11:48:48 +0000 (11:48 +0000)]
ramips: generate sysupgrade image for the ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29884
Gabor Juhos [Tue, 24 Jan 2012 11:48:47 +0000 (11:48 +0000)]
ramips: add user-space support for ALL0256N
This adds uci-defaults and sysupgrade support for the ALL0256N.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29883
Gabor Juhos [Tue, 24 Jan 2012 11:48:45 +0000 (11:48 +0000)]
ramips: add kernel support for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29882
John Crispin [Tue, 24 Jan 2012 11:31:23 +0000 (11:31 +0000)]
Initial DSL framework
- Removed ifx_cpe_control_init.sh (the old init script)
- Created dsl_control (/etc/init.d)
- tidied up start and stop
- stop calls dsl_notify before killing daemon
- has status and lucistat options to provide detail
- copes with daemon not running situation
- Updated package makefile to use new init script and to build cli support
- Provide a dsl_notify.sh script to cope with line up/down events
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>
SVN-Revision: 29881
Gabor Juhos [Tue, 24 Jan 2012 09:47:25 +0000 (09:47 +0000)]
ar71xx: nuke fs_all variable in image/Makefile
SVN-Revision: 29880
Gabor Juhos [Tue, 24 Jan 2012 09:47:23 +0000 (09:47 +0000)]
ar71xx: create interim kernel files in a separate dir
This reduces the size of the ImageBuilder tarball a lot.
SVN-Revision: 29879
Gabor Juhos [Tue, 24 Jan 2012 09:47:22 +0000 (09:47 +0000)]
ar71xx: prebuild all loaders in Image/Prepare stage
SVN-Revision: 29878
Gabor Juhos [Tue, 24 Jan 2012 09:47:20 +0000 (09:47 +0000)]
ImageBuilder: respect the PROFILE parameter
Based on a patch from #10766
SVN-Revision: 29877
projects / openwrt / staging / ldir.git / log