git.openwrt.org Git - openwrt/staging/blogic.git/log

mmc: block: avoid multiblock reads for the last sector in SPI mode

On some SD cards over SPI, reading with the multiblock read command the last
sector will leave the card in a bad state.

Remove last sectors from the multiblock reading cmd.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Linux 4.19-rc7

Merge tag 'char-misc-4.19-rc7' of git://git./linux/kernel/git/gregkh/char-misc

I wrote:
  "Char/Misc fixes for 4.19-rc7

   Here are 8 small fixes for some char/misc driver issues

   Included here are:
- fpga driver fixes
- thunderbolt bugfixes
- firmware core revert/fix
- hv core fix
- hv tool fix

   All of these have been in linux-next with no reported issues."

* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  thunderbolt: Initialize after IOMMUs
  thunderbolt: Do not handle ICM events after domain is stopped
  firmware: Always initialize the fw_priv list object
  docs: fpga: document fpga manager flags
  fpga: bridge: fix obvious function documentation error
  tools: hv: fcopy: set 'error' in case an unknown operation was requested
  fpga: do not access region struct after fpga_region_unregister
  Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()

Merge tag 'tty-4.19-rc7' of git://git./linux/kernel/git/gregkh/tty

I wrote:
  "Serial driver fixes for 4.19-rc7

   Here are 3 small serial driver fixes for 4.19-rc7
    - 2 sh-sci bugfixes for reported issues
    - a revert of the PM handling for the 8250_dw code

   All of these have been in linux-next with no reported issues."

* tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: sh-sci: Allow for compressed SCIF address"
  Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"
  Revert "serial: 8250_dw: Fix runtime PM handling"

Merge tag 'usb-4.19-rc7' of git://git./linux/kernel/git/gregkh/usb

I wrote:
  "USB fixes for 4.19-rc7

   Here are some small USB fixes for 4.19-rc7

   These include:
     - the usual xhci bugfixes for reported issues
     - some new serial driver device ids
     - bugfix for the option serial driver for some devices
     - bugfix for the cdc_acm driver that has been there for a long time.

   All of these have been in linux-next for a while with no reported
   issues."

* tag 'usb-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: xhci-mtk: resume USB3 roothub first
  xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
  usb: cdc_acm: Do not leak URB buffers
  USB: serial: simple: add Motorola Tetra MTP6550 id
  USB: serial: option: add two-endpoints device-id flag
  USB: serial: option: improve Quectel EP06 detection

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Wolfram writes:
  "i2c for 4.19

   I2C has three driver bugfixes and a fix for a typo for you."

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Call i2c_dw_clk_rate() only when calculating timings
  i2c: i2c-scmi: fix for i2c_smbus_write_block_data
  i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized"
  i2c: i2c-qcom-geni: Properly handle DMA safe buffers

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

James writes:
  "SCSI fixes on 20181006

   Small fix for an unititialized mutex in the qedi driver."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Initialize the stats mutex lock

Merge tag 'powerpc-4.19-4' of https://git./linux/kernel/git/powerpc/linux

Michael writes:
  "powerpc fixes for 4.19 #4

   Four regression fixes.

   A fix for a change to lib/xz which broke our zImage loader when
   building with XZ compression. OK'ed by Herbert who merged the
   original patch.

   The recent fix we did to avoid patching __init text broke some 32-bit
   machines, fix that.

   Our show_user_instructions() could be tricked into printing kernel
   memory, add a check to avoid that.

   And a fix for a change to our NUMA initialisation logic, which causes
   crashes in some kdump configurations.

   Thanks to:
     Christophe Leroy, Hari Bathini, Jann Horn, Joel Stanley, Meelis
     Roos, Murilo Opsfelder Araujo, Srikar Dronamraju."

* tag 'powerpc-4.19-4' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/numa: Skip onlining a offline node in kdump path
  powerpc: Don't print kernel instructions in show_user_instructions()
  powerpc/lib: fix book3s/32 boot failure due to code patching
  lib/xz: Put CRC32_POLY_LE in xz_private.h

Merge git://git./linux/kernel/git/davem/net

Dave writes:
  "Networking fixes:

  1) Fix truncation of 32-bit right shift in bpf, from Jann Horn.

  2) Fix memory leak in wireless wext compat, from Stefan Seyfried.

  3) Use after free in cfg80211's reg_process_hint(), from Yu Zhao.

  4) Need to cancel pending work when unbinding in smsc75xx otherwise
     we oops, also from Yu Zhao.

  5) Don't allow enslaving a team device to itself, from Ido Schimmel.

  6) Fix backwards compat with older userspace for rtnetlink FDB dumps.
     From Mauricio Faria.

  7) Add validation of tc policy netlink attributes, from David Ahern.

  8) Fix RCU locking in rawv6_send_hdrinc(), from Wei Wang."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
  ipv6: take rcu lock in rawv6_send_hdrinc()
  net: sched: Add policy validation for tc attributes
  rtnetlink: fix rtnl_fdb_dump() for ndmsg header
  yam: fix a missing-check bug
  net: bpfilter: Fix type cast and pointer warnings
  net: cxgb3_main: fix a missing-check bug
  bpf: 32-bit RSH verification must truncate input before the ALU op
  net: phy: phylink: fix SFP interface autodetection
  be2net: don't flip hw_features when VXLANs are added/deleted
  net/packet: fix packet drop as of virtio gso
  net: dsa: b53: Keep CPU port as tagged in all VLANs
  openvswitch: load NAT helper
  bnxt_en: get the reduced max_irqs by the ones used by RDMA
  bnxt_en: free hwrm resources, if driver probe fails.
  bnxt_en: Fix enables field in HWRM_QUEUE_COS2BW_CFG request
  bnxt_en: Fix VNIC reservations on the PF.
  team: Forbid enslaving team device to itself
  net/usb: cancel pending work when unbinding smsc75xx
  mlxsw: spectrum: Delete RIF when VLAN device is removed
  ...

Merge branch 'akpm'

* akpm:
  mm: madvise(MADV_DODUMP): allow hugetlbfs pages
  ocfs2: fix locking for res->tracking and dlm->tracking_list
  mm/vmscan.c: fix int overflow in callers of do_shrink_slab()
  mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly
  mm/vmstat.c: fix outdated vmstat_text
  proc: restrict kernel stack dumps to root
  mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes
  mm/migrate.c: split only transparent huge pages when allocation fails
  ipc/shm.c: use ERR_CAST() for shm_lock() error return
  mm/gup_benchmark: fix unsigned comparison to zero in __gup_benchmark_ioctl
  mm, thp: fix mlocking THP page with migration enabled
  ocfs2: fix crash in ocfs2_duplicate_clusters_by_page()
  hugetlb: take PMD sharing into account when flushing tlb/caches
  mm: migration: fix migration of huge PMD shared pages

mm: madvise(MADV_DODUMP): allow hugetlbfs pages

Reproducer, assuming 2M of hugetlbfs available:

Hugetlbfs mounted, size=2M and option user=testuser

  # mount | grep ^hugetlbfs
  hugetlbfs on /dev/hugepages type hugetlbfs (rw,pagesize=2M,user=dan)
  # sysctl vm.nr_hugepages=1
  vm.nr_hugepages = 1
  # grep Huge /proc/meminfo
  AnonHugePages:         0 kB
  ShmemHugePages:        0 kB
  HugePages_Total:       1
  HugePages_Free:        1
  HugePages_Rsvd:        0
  HugePages_Surp:        0
  Hugepagesize:       2048 kB
  Hugetlb:            2048 kB

Code:

  #include <sys/mman.h>
  #include <stddef.h>
  #define SIZE 2*1024*1024
  int main()
  {
    void *ptr;
    ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_HUGETLB | MAP_ANONYMOUS, -1, 0);
    madvise(ptr, SIZE, MADV_DONTDUMP);
    madvise(ptr, SIZE, MADV_DODUMP);
  }

Compile and strace:

  mmap(NULL, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB, -1, 0) = 0x7ff7c9200000
  madvise(0x7ff7c9200000, 2097152, MADV_DONTDUMP) = 0
  madvise(0x7ff7c9200000, 2097152, MADV_DODUMP) = -1 EINVAL (Invalid argument)

hugetlbfs pages have VM_DONTEXPAND in the VmFlags driver pages based on
author testing with analysis from Florian Weimer[1].

The inclusion of VM_DONTEXPAND into the VM_SPECIAL defination was a
consequence of the large useage of VM_DONTEXPAND in device drivers.

A consequence of [2] is that VM_DONTEXPAND marked pages are unable to be
marked DODUMP.

A user could quite legitimately madvise(MADV_DONTDUMP) their hugetlbfs
memory for a while and later request that madvise(MADV_DODUMP) on the same
memory.  We correct this omission by allowing madvice(MADV_DODUMP) on
hugetlbfs pages.

[1] https://stackoverflow.com/questions/52548260/madvisedodump-on-the-same-ptr-size-as-a-successful-madvisedontdump-fails-wit
[2] commit 0103bd16fb90 ("mm: prepare VM_DONTDUMP for using in drivers")

Link: http://lkml.kernel.org/r/20180930054629.29150-1-daniel@linux.ibm.com
Link: https://lists.launchpad.net/maria-discuss/msg05245.html
Fixes: 0103bd16fb90 ("mm: prepare VM_DONTDUMP for using in drivers")
Reported-by: Kenneth Penza <kpenza@gmail.com>
Signed-off-by: Daniel Black <daniel@linux.ibm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix locking for res->tracking and dlm->tracking_list

In dlm_init_lockres() we access and modify res->tracking and
dlm->tracking_list without holding dlm->track_lock. This can cause list
corruptions and can end up in kernel panic.

Fix this by locking res->tracking and dlm->tracking_list with
dlm->track_lock instead of dlm->spinlock.

Link: http://lkml.kernel.org/r/1529951192-4686-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmscan.c: fix int overflow in callers of do_shrink_slab()

do_shrink_slab() returns unsigned long value, and the placing into int
variable cuts high bytes off. Then we compare ret and 0xfffffffe (since
SHRINK_EMPTY is converted to ret type).

Thus a large number of objects returned by do_shrink_slab() may be
interpreted as SHRINK_EMPTY, if low bytes of their value are equal to
0xfffffffe. Fix that by declaration ret as unsigned long in these
functions.

Link: http://lkml.kernel.org/r/153813407177.17544.14888305435570723973.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reported-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly

5dd0b16cdaff ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even
on UP") made the availability of the NR_TLB_REMOTE_FLUSH* counters inside
the kernel unconditional to reduce #ifdef soup, but (either to avoid
showing dummy zero counters to userspace, or because that code was missed)
didn't update the vmstat_array, meaning that all following counters would
be shown with incorrect values.

This only affects kernel builds with
CONFIG_VM_EVENT_COUNTERS=y && CONFIG_DEBUG_TLBFLUSH=y && CONFIG_SMP=n.

Link: http://lkml.kernel.org/r/20181001143138.95119-2-jannh@google.com
Fixes: 5dd0b16cdaff ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmstat.c: fix outdated vmstat_text

7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely") removed the
VMACACHE_FULL_FLUSHES statistics, but didn't remove the corresponding
entry in vmstat_text. This causes an out-of-bounds access in
vmstat_show().

Luckily this only affects kernels with CONFIG_DEBUG_VM_VMACACHE=y, which
is probably very rare.

Link: http://lkml.kernel.org/r/20181001143138.95119-1-jannh@google.com
Fixes: 7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: restrict kernel stack dumps to root

Currently, you can use /proc/self/task/*/stack to cause a stack walk on
a task you control while it is running on another CPU.  That means that
the stack can change under the stack walker.  The stack walker does
have guards against going completely off the rails and into random
kernel memory, but it can interpret random data from your kernel stack
as instruction pointers and stack pointers.  This can cause exposure of
kernel stack contents to userspace.

Restrict the ability to inspect kernel stacks of arbitrary tasks to root
in order to prevent a local attacker from exploiting racy stack unwinding
to leak kernel task stack contents.  See the added comment for a longer
rationale.

There don't seem to be any users of this userspace API that can't
gracefully bail out if reading from the file fails.  Therefore, I believe
that this change is unlikely to break things.  In the case that this patch
does end up needing a revert, the next-best solution might be to fake a
single-entry stack based on wchan.

Link: http://lkml.kernel.org/r/20180927153316.200286-1-jannh@google.com
Fixes: 2ec220e27f50 ("proc: add /proc/*/stack")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ken Chen <kenchen@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes

ARM64 architecture also supports 32MB and 512MB HugeTLB page sizes. This
just adds mmap() system call argument encoding for them.

Link: http://lkml.kernel.org/r/1537841300-6979-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/migrate.c: split only transparent huge pages when allocation fails

split_huge_page_to_list() fails on HugeTLB pages.  I was experimenting
with moving 32MB contig HugeTLB pages on arm64 (with a debug patch
applied) and hit the following stack trace when the kernel crashed.

[ 3732.462797] Call trace:
[ 3732.462835]  split_huge_page_to_list+0x3b0/0x858
[ 3732.462913]  migrate_pages+0x728/0xc20
[ 3732.462999]  soft_offline_page+0x448/0x8b0
[ 3732.463097]  __arm64_sys_madvise+0x724/0x850
[ 3732.463197]  el0_svc_handler+0x74/0x110
[ 3732.463297]  el0_svc+0x8/0xc
[ 3732.463347] Code: d1000400 f90b0e60 f2fbd5a2 a94982a1 (f9000420)

When unmap_and_move[_huge_page]() fails due to lack of memory, the
splitting should happen only for transparent huge pages not for HugeTLB
pages.  PageTransHuge() returns true for both THP and HugeTLB pages.
Hence the conditonal check should test PagesHuge() flag to make sure that
given pages is not a HugeTLB one.

Link: http://lkml.kernel.org/r/1537798495-4996-1-git-send-email-anshuman.khandual@arm.com
Fixes: 94723aafb9 ("mm: unclutter THP migration")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc/shm.c: use ERR_CAST() for shm_lock() error return

This uses ERR_CAST() instead of an open-coded cast, as it is casting
across structure pointers, which upsets __randomize_layout:

ipc/shm.c: In function `shm_lock':
ipc/shm.c:209:9: note: randstruct: casting between randomized structure pointer types (ssa): `struct shmid_kernel' and `struct kern_ipc_perm'

return (void *)ipcp;
^~~~~~~~~~~~

Link: http://lkml.kernel.org/r/20180919180722.GA15073@beast
Fixes: 82061c57ce93 ("ipc: drop ipc_lock()")
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/gup_benchmark: fix unsigned comparison to zero in __gup_benchmark_ioctl

get_user_pages_fast() will return negative value if no pages were pinned,
then be converted to a unsigned, which is compared to zero, giving the
wrong result.

Link: http://lkml.kernel.org/r/20180921095015.26088-1-yuehaibing@huawei.com
Fixes: 09e35a4a1ca8 ("mm/gup_benchmark: handle gup failures")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, thp: fix mlocking THP page with migration enabled

A transparent huge page is represented by a single entry on an LRU list.
Therefore, we can only make unevictable an entire compound page, not
individual subpages.

If a user tries to mlock() part of a huge page, we want the rest of the
page to be reclaimable.

We handle this by keeping PTE-mapped huge pages on normal LRU lists: the
PMD on border of VM_LOCKED VMA will be split into PTE table.

Introduction of THP migration breaks[1] the rules around mlocking THP
pages.  If we had a single PMD mapping of the page in mlocked VMA, the
page will get mlocked, regardless of PTE mappings of the page.

For tmpfs/shmem it's easy to fix by checking PageDoubleMap() in
remove_migration_pmd().

Anon THP pages can only be shared between processes via fork().  Mlocked
page can only be shared if parent mlocked it before forking, otherwise CoW
will be triggered on mlock().

For Anon-THP, we can fix the issue by munlocking the page on removing PTE
migration entry for the page.  PTEs for the page will always come after
mlocked PMD: rmap walks VMAs from oldest to newest.

Test-case:

#include <unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <linux/mempolicy.h>
#include <numaif.h>

int main(void)
{
        unsigned long nodemask = 4;
        void *addr;

addr = mmap((void *)0x20000000UL, 2UL << 20, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, -1, 0);

        if (fork()) {
wait(NULL);
return 0;
        }

        mlock(addr, 4UL << 10);
        mbind(addr, 2UL << 20, MPOL_PREFERRED | MPOL_F_RELATIVE_NODES,
                &nodemask, 4, MPOL_MF_MOVE);

        return 0;
}

[1] https://lkml.kernel.org/r/CAOMGZ=G52R-30rZvhGxEbkTw7rLLwBGadVYeo--iizcD3upL3A@mail.gmail.com

Link: http://lkml.kernel.org/r/20180917133816.43995-1-kirill.shutemov@linux.intel.com
Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix crash in ocfs2_duplicate_clusters_by_page()

ocfs2_duplicate_clusters_by_page() may crash if one of the extent's pages
is dirty. When a page has not been written back, it is still in dirty
state. If ocfs2_duplicate_clusters_by_page() is called against the dirty
page, the crash happens.

To fix this bug, we can just unlock the page and wait until the page until
its not dirty.

The following is the backtrace:

kernel BUG at /root/code/ocfs2/refcounttree.c:2961!
[exception RIP: ocfs2_duplicate_clusters_by_page+822]
__ocfs2_move_extent+0x80/0x450 [ocfs2]
? __ocfs2_claim_clusters+0x130/0x250 [ocfs2]
ocfs2_defrag_extent+0x5b8/0x5e0 [ocfs2]
__ocfs2_move_extents_range+0x2a4/0x470 [ocfs2]
ocfs2_move_extents+0x180/0x3b0 [ocfs2]
? ocfs2_wait_for_recovery+0x13/0x70 [ocfs2]
ocfs2_ioctl_move_extents+0x133/0x2d0 [ocfs2]
ocfs2_ioctl+0x253/0x640 [ocfs2]
do_vfs_ioctl+0x90/0x5f0
SyS_ioctl+0x74/0x80
do_syscall_64+0x74/0x140
entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Once we find the page is dirty, we do not wait until it's clean, rather we
use write_one_page() to write it back

Link: http://lkml.kernel.org/r/20180829074740.9438-1-lchen@suse.com
[lchen@suse.com: update comments]
Link: http://lkml.kernel.org/r/20180830075041.14879-1-lchen@suse.com
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Larry Chen <lchen@suse.com>
Acked-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: take PMD sharing into account when flushing tlb/caches

When fixing an issue with PMD sharing and migration, it was discovered via
code inspection that other callers of huge_pmd_unshare potentially have an
issue with cache and tlb flushing.

Use the routine adjust_range_if_pmd_sharing_possible() to calculate worst
case ranges for mmu notifiers. Ensure that this range is flushed if
huge_pmd_unshare succeeds and unmaps a PUD_SUZE area.

Link: http://lkml.kernel.org/r/20180823205917.16297-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: migration: fix migration of huge PMD shared pages

The page migration code employs try_to_unmap() to try and unmap the source
page.  This is accomplished by using rmap_walk to find all vmas where the
page is mapped.  This search stops when page mapcount is zero.  For shared
PMD huge pages, the page map count is always 1 no matter the number of
mappings.  Shared mappings are tracked via the reference count of the PMD
page.  Therefore, try_to_unmap stops prematurely and does not completely
unmap all mappings of the source page.

This problem can result is data corruption as writes to the original
source page can happen after contents of the page are copied to the target
page.  Hence, data is lost.

This problem was originally seen as DB corruption of shared global areas
after a huge page was soft offlined due to ECC memory errors.  DB
developers noticed they could reproduce the issue by (hotplug) offlining
memory used to back huge pages.  A simple testcase can reproduce the
problem by creating a shared PMD mapping (note that this must be at least
PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using
migrate_pages() to migrate process pages between nodes while continually
writing to the huge pages being migrated.

To fix, have the try_to_unmap_one routine check for huge PMD sharing by
calling huge_pmd_unshare for hugetlbfs huge pages.  If it is a shared
mapping it will be 'unshared' which removes the page table entry and drops
the reference on the PMD page.  After this, flush caches and TLB.

mmu notifiers are called before locking page tables, but we can not be
sure of PMD sharing until page tables are locked.  Therefore, check for
the possibility of PMD sharing before locking so that notifiers can
prepare for the worst possible case.

Link: http://lkml.kernel.org/r/20180823205917.16297-2-mike.kravetz@oracle.com
[mike.kravetz@oracle.com: make _range_in_vma() a static inline]
Link: http://lkml.kernel.org/r/6063f215-a5c8-2f0c-465a-2c515ddc952d@oracle.com
Fixes: 39dde65c9940 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'pci-v4.19-fixes-3' of ssh://gitolite./linux/kernel/git/helgaas/pci

Bjorn writes:
  "PCI fixes for v4.19:

   - Reprogram bridge prefetch registers to fix NVIDIA and Radeon issues
     after suspend/resume (Daniel Drake)

   - Fix mvebu I/O mapping creation sequence (Thomas Petazzoni)

   - Fix minor MAINTAINERS file match issue (Bjorn Helgaas)"

* tag 'pci-v4.19-fixes-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Fix PCI I/O mapping creation sequence
  MAINTAINERS: Remove obsolete drivers/pci pattern from ACPI section
  PCI: Reprogram bridge prefetch registers on resume

Merge tag 'for-4.19/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm

Mike writes:
  "device mapper fixes

   - Fix a DM thinp __udivdi3 undefined on 32-bit bug introduced during
     4.19 merge window.

   - Fix leak and dangling pointer in DM multipath's scsi_dh related code.

   - A couple stable@ fixes for DM cache's resize support.

   - A DM raid fix to remove "const" from decipher_sync_action()'s return
     type."

* tag 'for-4.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix resize crash if user doesn't reload cache table
  dm cache metadata: ignore hints array being too small during resize
  dm raid: remove bogus const from decipher_sync_action() return type
  dm mpath: fix attached_handler_name leak and dangling hw_handler_name pointer
  dm thin metadata: fix __udivdi3 undefined on 32-bit

Merge tag 'gpio-v4.19-3' of git://git./linux/kernel/git/linusw/linux-gpio

Linus writes:
  "A single GPIO fix:
   Free the last used descriptor, an off by one error.
   This is tagged for stable as well."

* tag 'gpio-v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: Free the last requested descriptor

Merge tag 'pm-4.19-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Rafael writes:
  "Power management fix for 4.19-rc7

   Fix a bug that may cause runtime PM to misbehave for some devices
   after a failing or aborted system suspend which is nasty enough for
   an -rc7 time frame fix."

* tag 'pm-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / core: Clear the direct_complete flag on errors

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Ingo writes:
  "perf fixes:
    - fix a CPU#0 hot unplug bug and a PCI enumeration bug in the x86 Intel uncore PMU driver
    - fix a CPU event enumeration bug in the x86 AMD PMU driver
    - fix a perf ring-buffer corruption bug when using tracepoints
    - fix a PMU unregister locking bug"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/uncore: Set ThreadMask and SliceMask for L3 Cache perf events
  perf/x86/intel/uncore: Fix PCI BDF address of M3UPI on SKX
  perf/ring_buffer: Prevent concurent ring buffer access
  perf/x86/intel/uncore: Use boot_cpu_data.phys_proc_id instead of hardcorded physical package ID 0
  perf/core: Fix perf_pmu_unregister() locking

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Ingo writes:
  "x86 fixes:

   Misc fixes:

    - fix various vDSO bugs: asm constraints and retpolines
    - add vDSO test units to make sure they never re-appear
    - fix UV platform TSC initialization bug
    - fix build warning on Clang"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Fix vDSO syscall fallback asm constraint regression
  x86/cpu/amd: Remove unnecessary parentheses
  x86/vdso: Only enable vDSO retpolines when enabled and supported
  x86/tsc: Fix UV TSC initialization
  x86/platform/uv: Provide is_early_uv_system()
  selftests/x86: Add clock_gettime() tests to test_vdso
  x86/vdso: Fix asm constraints on vDSO syscall fallbacks

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Ingo writes:
  "scheduler fixes:

   These fixes address a rather involved performance regression between
   v4.17->v4.19 in the sched/numa auto-balancing code. Since distros
   really need this fix we accelerated it to sched/urgent for a faster
   upstream merge.

   NUMA scheduling and balancing performance is now largely back to
   v4.17 levels, without reintroducing the NUMA placement bugs that
   v4.18 and v4.19 fixed.

   Many thanks to Srikar Dronamraju, Mel Gorman and Jirka Hladky, for
   reporting, testing, re-testing and solving this rather complex set of
   bugs."

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/numa: Migrate pages to local nodes quicker early in the lifetime of a task
  mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration
  sched/numa: Avoid task migration for small NUMA improvement
  mm/migrate: Use spin_trylock() while resetting rate limit
  sched/numa: Limit the conditions where scan period is reset
  sched/numa: Reset scan rate whenever task moves across nodes
  sched/numa: Pass destination CPU as a parameter to migrate_task_rq
  sched/numa: Stop multiple tasks from moving to the CPU at the same time

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Ingo writes:
  "locking fixes:

   A fix in the ww_mutex self-test that produces a scary splat, plus an
   updates to the maintained-filed patters in MAINTAINER."

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/ww_mutex: Fix runtime warning in the WW mutex selftest
  MAINTAINERS: Remove dead path from LOCKING PRIMITIVES entry

Merge tag 'sound-4.19-rc7' of git://git./linux/kernel/git/tiwai/sound

Takashi writes:
  "sound fixes for 4.19-rc7

   Just two small fixes for HD-audio: one is for a typo in completion
   timeout, and another a fixup for Dell machines as usual"

* tag 'sound-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760
  ALSA: hda: Fix the audio-component completion timeout

net: mvpp2: Extract the correct ethtype from the skb for tx csum offload

When offloading the L3 and L4 csum computation on TX, we need to extract
the l3_proto from the ethtype, independently of the presence of a vlan
tag.

The actual driver uses skb->protocol as-is, resulting in packets with
the wrong L4 checksum being sent when there's a vlan tag in the packet
header and checksum offloading is enabled.

This commit makes use of vlan_protocol_get() to get the correct ethtype
regardless the presence of a vlan tag.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: take rcu lock in rawv6_send_hdrinc()

In rawv6_send_hdrinc(), in order to avoid an extra dst_hold(), we
directly assign the dst to skb and set passed in dst to NULL to avoid
double free.
However, in error case, we free skb and then do stats update with the
dst pointer passed in. This causes use-after-free on the dst.
Fix it by taking rcu read lock right before dst could get released to
make sure dst does not get freed until the stats update is done.
Note: we don't have this issue in ipv4 cause dst is not used for stats
update in v4.

Syzkaller reported following crash:
BUG: KASAN: use-after-free in rawv6_send_hdrinc net/ipv6/raw.c:692 [inline]
BUG: KASAN: use-after-free in rawv6_sendmsg+0x4421/0x4630 net/ipv6/raw.c:921
Read of size 8 at addr ffff8801d95ba730 by task syz-executor0/32088

CPU: 1 PID: 32088 Comm: syz-executor0 Not tainted 4.19.0-rc2+ #93
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
rawv6_send_hdrinc net/ipv6/raw.c:692 [inline]
rawv6_sendmsg+0x4421/0x4630 net/ipv6/raw.c:921
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
___sys_sendmsg+0x7fd/0x930 net/socket.c:2114
__sys_sendmsg+0x11d/0x280 net/socket.c:2152
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg net/socket.c:2159 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457099
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f83756edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f83756ee6d4 RCX: 0000000000457099
RDX: 0000000000000000 RSI: 0000000020003840 RDI: 0000000000000004
RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d4b30 R14: 00000000004c90b1 R15: 0000000000000000

Allocated by task 32088:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
kmem_cache_alloc+0x12e/0x730 mm/slab.c:3554
dst_alloc+0xbb/0x1d0 net/core/dst.c:105
ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:353
ip6_rt_cache_alloc+0x247/0x7b0 net/ipv6/route.c:1186
ip6_pol_route+0x8f8/0xd90 net/ipv6/route.c:1895
ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2093
fib6_rule_lookup+0x277/0x860 net/ipv6/fib6_rules.c:122
ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2121
ip6_route_output include/net/ip6_route.h:88 [inline]
ip6_dst_lookup_tail+0xe27/0x1d60 net/ipv6/ip6_output.c:951
ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079
rawv6_sendmsg+0x12d9/0x4630 net/ipv6/raw.c:905
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
___sys_sendmsg+0x7fd/0x930 net/socket.c:2114
__sys_sendmsg+0x11d/0x280 net/socket.c:2152
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg net/socket.c:2159 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5356:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kmem_cache_free+0x83/0x290 mm/slab.c:3756
dst_destroy+0x267/0x3c0 net/core/dst.c:141
dst_destroy_rcu+0x16/0x19 net/core/dst.c:154
__rcu_reclaim kernel/rcu/rcu.h:236 [inline]
rcu_do_batch kernel/rcu/tree.c:2576 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2880 [inline]
__rcu_process_callbacks kernel/rcu/tree.c:2847 [inline]
rcu_process_callbacks+0xf23/0x2670 kernel/rcu/tree.c:2864
__do_softirq+0x30b/0xad8 kernel/softirq.c:292

Fixes: 1789a640f556 ("raw: avoid two atomics in xmit")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: Add policy validation for tc attributes

A number of TC attributes are processed without proper validation
(e.g., length checks). Add a tca policy for all input attributes and use
when invoking nlmsg_parse.

The 2 Fixes tags below cover the latest additions. The other attributes
are a string (KIND), nested attribute (OPTIONS which does seem to have
validation in most cases), for dumps only or a flag.

Fixes: 5bc1701881e39 ("net: sched: introduce multichain support for filters")
Fixes: d47a6b0e7c492 ("net: sched: introduce ingress/egress block index attributes for qdisc")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnetlink: fix rtnl_fdb_dump() for ndmsg header

Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg',
which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh').

The problem is, the function bails out early if nlmsg_parse() fails, which
does occur for iproute2 usage of 'struct ndmsg' because the payload length
is shorter than the family header alone (as 'struct ifinfomsg' is assumed).

This breaks backward compatibility with userspace -- nothing is sent back.

Some examples with iproute2 and netlink library for go [1]:

1) $ bridge fdb show
    33:33:00:00:00:01 dev ens3 self permanent
    01:00:5e:00:00:01 dev ens3 self permanent
    33:33:ff:15:98:30 dev ens3 self permanent

      This one works, as it uses 'struct ifinfomsg'.

      fdb_show() @ iproute2/bridge/fdb.c
        """
        .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
        ...
        if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...]
        """

2) $ ip --family bridge neigh
    RTNETLINK answers: Invalid argument
    Dump terminated

      This one fails, as it uses 'struct ndmsg'.

      do_show_or_flush() @ iproute2/ip/ipneigh.c
        """
        .n.nlmsg_type = RTM_GETNEIGH,
        .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)),
        """

3) $ ./neighlist
    < no output >

      This one fails, as it uses 'struct ndmsg'-based.

      neighList() @ netlink/neigh_linux.go
        """
        req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...]
        msg := Ndmsg{
        """

The actual breakage was introduced by commit 0ff50e83b512 ("net: rtnetlink:
bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails
if the payload length (with the _actual_ family header) is less than the
family header length alone (which is assumed, in parameter 'hdrlen').
This is true in the examples above with struct ndmsg, with size and payload
length shorter than struct ifinfomsg.

However, that commit just intends to fix something under the assumption the
family header is indeed an 'struct ifinfomsg' - by preventing access to the
payload as such (via 'ifm' pointer) if the payload length is not sufficient
to actually contain it.

The assumption was introduced by commit 5e6d24358799 ("bridge: netlink dump
interface at par with brctl"), to support iproute2's 'bridge fdb' command
(not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken.

So, in order to unbreak the 'struct ndmsg' family headers and still allow
'struct ifinfomsg' to continue to work, check for the known message sizes
used with 'struct ndmsg' in iproute2 (with zero or one attribute which is
not used in this function anyway) then do not parse the data as ifinfomsg.

Same examples with this patch applied (or revert/before the original fix):

    $ bridge fdb show
    33:33:00:00:00:01 dev ens3 self permanent
    01:00:5e:00:00:01 dev ens3 self permanent
    33:33:ff:15:98:30 dev ens3 self permanent

    $ ip --family bridge neigh
    dev ens3 lladdr 33:33:00:00:00:01 PERMANENT
    dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT
    dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT

    $ ./neighlist
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
    netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}

Tested on mainline (v4.19-rc6) and net-next (3bd09b05b068).

References:

[1] netlink library for go (test-case)
    https://github.com/vishvananda/netlink

    $ cat ~/go/src/neighlist/main.go
    package main
    import ("fmt"; "syscall"; "github.com/vishvananda/netlink")
    func main() {
        neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE)
        for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) }
    }

    $ export GOPATH=~/go
    $ go get github.com/vishvananda/netlink
    $ go build neighlist
    $ ~/go/src/neighlist/neighlist

Thanks to David Ahern for suggestions to improve this patch.

Fixes: 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error")
Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl")
Reported-by: Aidan Obley <aobley@pivotal.io>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

yam: fix a missing-check bug

In yam_ioctl(), the concrete ioctl command is firstly copied from the
user-space buffer 'ifr->ifr_data' to 'ioctl_cmd' and checked through the
following switch statement. If the command is not as expected, an error
code EINVAL is returned. In the following execution the buffer
'ifr->ifr_data' is copied again in the cases of the switch statement to
specific data structures according to what kind of ioctl command is
requested. However, after the second copy, no re-check is enforced on the
newly-copied command. Given that the buffer 'ifr->ifr_data' is in the user
space, a malicious user can race to change the command between the two
copies. This way, the attacker can inject inconsistent data and cause
undefined behavior.

This patch adds a re-check in each case of the switch statement if there is
a second copy in that case, to re-check whether the command obtained in the
second copy is the same as the one in the first copy. If not, an error code
EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bpfilter: Fix type cast and pointer warnings

Fixes the following Sparse warnings:

net/bpfilter/bpfilter_kern.c:62:21: warning: cast removes address space
of expression
net/bpfilter/bpfilter_kern.c:101:49: warning: Using plain integer as
NULL pointer

Signed-off-by: Shanthosh RK <shanthosh.rk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cxgb3_main: fix a missing-check bug

In cxgb_extension_ioctl(), the command of the ioctl is firstly copied from
the user-space buffer 'useraddr' to 'cmd' and checked through the
switch statement. If the command is not as expected, an error code
EOPNOTSUPP is returned. In the following execution, i.e., the cases of the
switch statement, the whole buffer of 'useraddr' is copied again to a
specific data structure, according to what kind of command is requested.
However, after the second copy, there is no re-check on the newly-copied
command. Given that the buffer 'useraddr' is in the user space, a malicious
user can race to change the command between the two copies. By doing so,
the attacker can supply malicious data to the kernel and cause undefined
behavior.

This patch adds a re-check in each case of the switch statement if there is
a second copy in that case, to re-check whether the command obtained in the
second copy is the same as the one in the first copy. If not, an error code
EINVAL is returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-10-05

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix to truncate input on ALU operations in 32 bit mode, from Jann.

2) Fixes for cgroup local storage to reject reserved flags on element
update and rejection of map allocation with zero-sized value, from Roman.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: 32-bit RSH verification must truncate input before the ALU op

When I wrote commit 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification"), I
assumed that, in order to emulate 64-bit arithmetic with 32-bit logic, it
is sufficient to just truncate the output to 32 bits; and so I just moved
the register size coercion that used to be at the start of the function to
the end of the function.

That assumption is true for almost every op, but not for 32-bit right
shifts, because those can propagate information towards the least
significant bit. Fix it by always truncating inputs for 32-bit ops to 32
bits.

Also get rid of the coerce_reg_to_size() after the ALU op, since that has
no effect.

Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Merge tag 'iommu-fixes-v4.19-rc6' of git://git./linux/kernel/git/joro/iommu

Joerg writes:
  "IOMMU Fix for Linux v4.19-rc6

   One important fix:
- Fix a memory leak with AMD IOMMU when SME is active and a VM
  has assigned devices. In that case the complete guest memory
  will be leaked without this fix."

* tag 'iommu-fixes-v4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Clear memory encryption mask from physical address

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Paolo writes:
  "KVM changes for 4.19-rc7

   x86 and PPC bugfixes, mostly introduced in 4.19-rc1."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: nVMX: fix entry with pending interrupt if APICv is enabled
  KVM: VMX: hide flexpriority from guest when disabled at the module level
  KVM: VMX: check for existence of secondary exec controls before accessing
  KVM: PPC: Book3S HV: Avoid crash from THP collapse during radix page fault
  KVM: x86: fix L1TF's MMIO GFN calculation
  tools/kvm_stat: cut down decimal places in update interval dialog
  KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS
  KVM: x86: Do not use kvm_x86_ops->mpx_supported() directly
  KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled
  KVM: x86: never trap MSR_KERNEL_GS_BASE

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Herbert writes:
  "Crypto Fixes for 4.19

   This push fixes the following issues:
   - Out-of-bound stack access in qat.
   - Illegal schedule in mxs-dcp.
   - Memory corruption in chelsio.
   - Incorrect pointer computation in caam."

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: qat - Fix KASAN stack-out-of-bounds bug in adf_probe()
  crypto: mxs-dcp - Fix wait logic on chan threads
  crypto: chelsio - Fix memory corruption in DMA Mapped buffers.
  crypto: caam/jr - fix ablkcipher_edesc pointer arithmetic

Merge tag '4.19-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Steve writes:
  "SMB3 fixes

   four small SMB3 fixes: one for stable, the others to address a more
   recent regression"

* tag '4.19-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix lease break problem introduced by compounding
  cifs: only wake the thread for the very last PDU in a compound
  cifs: add a warning if we try to to dequeue a deleted mid
  smb2: fix missing files in root share directory listing

powerpc/numa: Skip onlining a offline node in kdump path

With commit 2ea626306810 ("powerpc/topology: Get topology for shared
processors at boot"), kdump kernel on shared LPAR may crash.

The necessary conditions are
- Shared LPAR with at least 2 nodes having memory and CPUs.
- Memory requirement for kdump kernel must be met by the first N-1
  nodes where there are at least N nodes with memory and CPUs.

Example numactl of such a machine.
  $ numactl -H
  available: 5 nodes (0,2,5-7)
  node 0 cpus:
  node 0 size: 0 MB
  node 0 free: 0 MB
  node 2 cpus:
  node 2 size: 255 MB
  node 2 free: 189 MB
  node 5 cpus: 24 25 26 27 28 29 30 31
  node 5 size: 4095 MB
  node 5 free: 4024 MB
  node 6 cpus: 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23
  node 6 size: 6353 MB
  node 6 free: 5998 MB
  node 7 cpus: 8 9 10 11 12 13 14 15 32 33 34 35 36 37 38 39
  node 7 size: 7640 MB
  node 7 free: 7164 MB
  node distances:
  node   0   2   5   6   7
    0:  10  40  40  40  40
    2:  40  10  40  40  40
    5:  40  40  10  40  40
    6:  40  40  40  10  20
    7:  40  40  40  20  10

Steps to reproduce.
1. Load / start kdump service.
2. Trigger a kdump (for example : echo c > /proc/sysrq-trigger)

When booting a kdump kernel with 2048M:

  kexec: Starting switchover sequence.
  I'm in purgatory
  Using 1TB segments
  hash-mmu: Initializing hash mmu with SLB
  Linux version 4.19.0-rc5-master+ (srikar@linux-xxu6) (gcc version 4.8.5 (SUSE Linux)) #1 SMP Thu Sep 27 19:45:00 IST 2018
  Found initrd at 0xc000000009e70000:0xc00000000ae554b4
  Using pSeries machine description
  -----------------------------------------------------
  ppc64_pft_size    = 0x1e
  phys_mem_size     = 0x88000000
  dcache_bsize      = 0x80
  icache_bsize      = 0x80
  cpu_features      = 0x000000ff8f5d91a7
    possible        = 0x0000fbffcf5fb1a7
    always          = 0x0000006f8b5c91a1
  cpu_user_features = 0xdc0065c2 0xef000000
  mmu_features      = 0x7c006001
  firmware_features = 0x00000007c45bfc57
  htab_hash_mask    = 0x7fffff
  physical_start    = 0x8000000
  -----------------------------------------------------
  numa:   NODE_DATA [mem 0x87d5e300-0x87d67fff]
  numa:     NODE_DATA(0) on node 6
  numa:   NODE_DATA [mem 0x87d54600-0x87d5e2ff]
  Top of RAM: 0x88000000, Total RAM: 0x88000000
  Memory hole size: 0MB
  Zone ranges:
    DMA      [mem 0x0000000000000000-0x0000000087ffffff]
    DMA32    empty
    Normal   empty
  Movable zone start for each node
  Early memory node ranges
    node   6: [mem 0x0000000000000000-0x0000000087ffffff]
  Could not find start_pfn for node 0
  Initmem setup node 0 [mem 0x0000000000000000-0x0000000000000000]
  On node 0 totalpages: 0
  Initmem setup node 6 [mem 0x0000000000000000-0x0000000087ffffff]
  On node 6 totalpages: 34816

  Unable to handle kernel paging request for data at address 0x00000060
  Faulting instruction address: 0xc000000008703a54
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 11 PID: 1 Comm: swapper/11 Not tainted 4.19.0-rc5-master+ #1
  NIP:  c000000008703a54 LR: c000000008703a38 CTR: 0000000000000000
  REGS: c00000000b673440 TRAP: 0380   Not tainted  (4.19.0-rc5-master+)
  MSR:  8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 24022022  XER: 20000002
  CFAR: c0000000086fc238 IRQMASK: 0
  GPR00: c000000008703a38 c00000000b6736c0 c000000009281900 0000000000000000
  GPR04: 0000000000000000 0000000000000000 fffffffffffff001 c00000000b660080
  GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000220
  GPR12: 0000000000002200 c000000009e51400 0000000000000000 0000000000000008
  GPR16: 0000000000000000 c000000008c152e8 c000000008c152a8 0000000000000000
  GPR20: c000000009422fd8 c000000009412fd8 c000000009426040 0000000000000008
  GPR24: 0000000000000000 0000000000000000 c000000009168bc8 c000000009168c78
  GPR28: c00000000b126410 0000000000000000 c00000000916a0b8 c00000000b126400
  NIP [c000000008703a54] bus_add_device+0x84/0x1e0
  LR [c000000008703a38] bus_add_device+0x68/0x1e0
  Call Trace:
  [c00000000b6736c0] [c000000008703a38] bus_add_device+0x68/0x1e0 (unreliable)
  [c00000000b673740] [c000000008700194] device_add+0x454/0x7c0
  [c00000000b673800] [c00000000872e660] __register_one_node+0xb0/0x240
  [c00000000b673860] [c00000000839a6bc] __try_online_node+0x12c/0x180
  [c00000000b673900] [c00000000839b978] try_online_node+0x58/0x90
  [c00000000b673930] [c0000000080846d8] find_and_online_cpu_nid+0x158/0x190
  [c00000000b673a10] [c0000000080848a0] numa_update_cpu_topology+0x190/0x580
  [c00000000b673c00] [c000000008d3f2e4] smp_cpus_done+0x94/0x108
  [c00000000b673c70] [c000000008d5c00c] smp_init+0x174/0x19c
  [c00000000b673d00] [c000000008d346b8] kernel_init_freeable+0x1e0/0x450
  [c00000000b673dc0] [c0000000080102e8] kernel_init+0x28/0x160
  [c00000000b673e30] [c00000000800b65c] ret_from_kernel_thread+0x5c/0x80
  Instruction dump:
  60000000 60000000 e89e0020 7fe3fb78 4bff87d5 60000000 7c7d1b79 4082008c
  e8bf0050 e93e0098 3b9f0010 2fa50000 <e8690060> 38630018 419e0114 7f84e378
  ---[ end trace 593577668c2daa65 ]---

However a regular kernel with 4096M (2048 gets reserved for crash
kernel) boots properly.

Unlike regular kernels, which mark all available nodes as online,
kdump kernel only marks just enough nodes as online and marks the rest
as offline at boot. However kdump kernel boots with all available
CPUs. With Commit 2ea626306810 ("powerpc/topology: Get topology for
shared processors at boot"), all CPUs are onlined on their respective
nodes at boot time. try_online_node() tries to online the offline
nodes but fails as all needed subsystems are not yet initialized.

As part of fix, detect and skip early onlining of a offline node.

Fixes: 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot")
Reported-by: Pavithra Prakash <pavrampu@in.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Don't print kernel instructions in show_user_instructions()

Recently we implemented show_user_instructions() which dumps the code
around the NIP when a user space process dies with an unhandled
signal. This was modelled on the x86 code, and we even went so far as
to implement the exact same bug, namely that if the user process
crashed with its NIP pointing into the kernel we will dump kernel text
to dmesg. eg:

  bad-bctr[2996]: segfault (11) at c000000000010000 nip c000000000010000 lr 12d0b0894 code 1
  bad-bctr[2996]: code: fbe10068 7cbe2b78 7c7f1b78 fb610048 38a10028 38810020 fb810050 7f8802a6
  bad-bctr[2996]: code: 3860001c f8010080 48242371 60000000 <7c7b1b79> 4082002c e8010080 eb610048

This was discovered on x86 by Jann Horn and fixed in commit
342db04ae712 ("x86/dumpstack: Don't dump kernel memory based on usermode RIP").

Fix it by checking the adjusted NIP value (pc) and number of
instructions against USER_DS, and bail if we fail the check, eg:

  bad-bctr[2969]: segfault (11) at c000000000010000 nip c000000000010000 lr 107930894 code 1
  bad-bctr[2969]: Bad NIP, not dumping instructions.

Fixes: 88b0fe175735 ("powerpc: Add show_user_instructions()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

i2c: designware: Call i2c_dw_clk_rate() only when calculating timings

There are platforms which don't provide input clock rate but provide
I2C timing parameters. Commit 3bd4f277274b ("i2c: designware: Call
i2c_dw_clk_rate() only once in i2c_dw_init_master()") causes needless
warning during probe on those platforms since i2c_dw_clk_rate(), which
causes the warning when input clock is unknown, is called even when
there is no need to calculate timing parameters.

Fixes: 3bd4f277274b ("i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master()")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

iommu/amd: Clear memory encryption mask from physical address

Boris Ostrovsky reported a memory leak with device passthrough when SME
is active.

The VFIO driver uses iommu_iova_to_phys() to get the physical address for
an iova. This physical address is later passed into vfio_unmap_unpin() to
unpin the memory. The vfio_unmap_unpin() uses pfn_valid() before unpinning
the memory. The pfn_valid() check was failing because encryption mask was
part of the physical address returned. This resulted in the memory not
being unpinned and therefore leaked after the guest terminates.

The memory encryption mask must be cleared from the physical address in
iommu_iova_to_phys().

Fixes: 2543a786aa25 ("iommu/amd: Allow the AMD IOMMU to work with memory encryption")
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <iommu@lists.linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

net: phy: phylink: fix SFP interface autodetection

When connecting SFP PHY to phylink use the detected interface.
Otherwise, the link fails to come up when the configured 'phy-mode'
differs from the SFP detected mode.

Move most of phylink_connect_phy() into __phylink_connect_phy(), and
leave phylink_connect_phy() as a wrapper. phylink_sfp_connect_phy() can
now pass the SFP detected PHY interface to __phylink_connect_phy().

This fixes 1GB SFP module link up on eth3 of the Macchiatobin board that
is configured in the DT to "2500base-x" phy-mode.

Fixes: 9525ae83959b6 ("phylink: add phylink infrastructure")
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: don't flip hw_features when VXLANs are added/deleted

the be2net implementation of .ndo_tunnel_{add,del}() changes the value of
NETIF_F_GSO_UDP_TUNNEL bit in 'features' and 'hw_features', but it forgets
to call netdev_features_change(). Moreover, ethtool setting for that bit
can potentially be reverted after a tunnel is added or removed.

GSO already does software segmentation when 'hw_enc_features' is 0, even
if VXLAN offload is turned on. In addition, commit 096de2f83ebc ("benet:
stricter vxlan offloading check in be_features_check") avoids hardware
segmentation of non-VXLAN tunneled packets, or VXLAN packets having wrong
destination port. So, it's safe to avoid flipping the above feature on
addition/deletion of VXLAN tunnels.

Fixes: 630f4b70567f ("be2net: Export tunnel offloads only when a VxLAN tunnel is created")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kvm-ppc-fixes-4.19-3' of git://git./linux/kernel/git/paulus/powerpc into kvm-master

Third set of PPC KVM fixes for 4.19

One patch here, fixing a potential host crash introduced (or at least
exacerbated) by a previous fix for corruption relating to radix guest
page faults and THP operations.

net/packet: fix packet drop as of virtio gso

When we use raw socket as the vhost backend, a packet from virito with
gso offloading information, cannot be sent out in later validaton at
xmit path, as we did not set correct skb->protocol which is further used
for looking up the gso function.

To fix this, we set this field according to virito hdr information.

Fixes: e858fae2b0b8f4 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Jianfeng Tan <jianfeng.tan@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Keep CPU port as tagged in all VLANs

Commit c499696e7901 ("net: dsa: b53: Stop using dev->cpu_port
incorrectly") was a bit too trigger happy in removing the CPU port from
the VLAN membership because we rely on DSA to program the CPU port VLAN,
which it does, except it does not bother itself with tagged/untagged and
just usese untagged.

Having the CPU port "follow" the user ports tagged/untagged is not great
and does not allow for properly differentiating, so keep the CPU port
tagged in all VLANs.

Reported-by: Gerhard Wiesinger <lists@wiesinger.com>
Fixes: c499696e7901 ("net: dsa: b53: Stop using dev->cpu_port incorrectly")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: load NAT helper

Load the respective NAT helper module if the flow uses it.

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnxt_en-fixes'

Michael Chan says:

====================
bnxt_en: Misc. bug fixes.

4 small bug fixes related to setting firmware message enables bits, possible
memory leak when probe fails, and ring accouting when RDMA driver is loaded.

Please queue these for -stable as well. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: get the reduced max_irqs by the ones used by RDMA

When getting the max rings supported, get the reduced max_irqs
by the ones used by RDMA.

If the number MSIX is the limiting factor, this bug may cause the
max ring count to be higher than it should be when RDMA driver is
loaded and may result in ring allocation failures.

Fixes: 30f529473ec9 ("bnxt_en: Do not modify max IRQ count after RDMA driver requests/frees IRQs.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: free hwrm resources, if driver probe fails.

When the driver probe fails, all the resources that were allocated prior
to the failure must be freed. However, hwrm dma response memory is not
getting freed.

This patch fixes the problem described above.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix enables field in HWRM_QUEUE_COS2BW_CFG request

In HWRM_QUEUE_COS2BW_CFG request, enables field should have the bits
set only for the queue ids which are having the valid parameters.

This causes firmware to return error when the TC to hardware CoS queue
mapping is not 1:1 during DCBNL ETS setup.

Fixes: 2e8ef77ee0ff ("bnxt_en: Add TC to hardware QoS queue mapping logic.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix VNIC reservations on the PF.

The enables bit for VNIC was set wrong when calling the HWRM_FUNC_CFG
firmware call to reserve VNICs. This has the effect that the firmware
will keep a large number of VNICs for the PF, and having very few for
VFs. DPDK driver running on the VFs, which requires more VNICs, may not
work properly as a result.

Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'drm-fixes-2018-10-05' of git://anongit.freedesktop.org/drm/drm

Dave writes:
  "amdgpu and two core fixes

   Two fixes for amdgpu:
   one corrects a use of process->mm
   one fix for display code race condition that can result in a crash

   Two core fixes:
   One for a use-after-free in the leasing code
   One for a cma/fbdev crash."

* tag 'drm-fixes-2018-10-05' of git://anongit.freedesktop.org/drm/drm:
  drm/amdkfd: Fix incorrect use of process->mm
  drm/amd/display: Signal hw_done() after waiting for flip_done()
  drm/cma-helper: Fix crash in fbdev error path
  drm: fix use-after-free read in drm_mode_create_lease_ioctl()

Merge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

- Fix an ordering issue in DC with respect to atomic flips that could result
in a crash
- Fix incorrect use of process->mm in KFD

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538668374-22334-1-git-send-email-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2018-10-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v4.19-rc7:
- Fix use-after-free in drm_mode_create_lease_ioctl()
- Fix crash in fbdev error path.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/13b2c3ac-9a96-710e-ceb9-890af164f10e@linux.intel.com

team: Forbid enslaving team device to itself

team's ndo_add_slave() acquires 'team->lock' and later tries to open the
newly enslaved device via dev_open(). This emits a 'NETDEV_UP' event
that causes the VLAN driver to add VLAN 0 on the team device. team's
ndo_vlan_rx_add_vid() will also try to acquire 'team->lock' and
deadlock.

Fix this by checking early at the enslavement function that a team
device is not being enslaved to itself.

A similar check was added to the bond driver in commit 09a89c219baf
("bonding: disallow enslaving a bond to itself").

WARNING: possible recursive locking detected
4.18.0-rc7+ #176 Not tainted
--------------------------------------------
syz-executor4/6391 is trying to acquire lock:
(____ptrval____) (&team->lock){+.+.}, at: team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868

but task is already holding lock:
(____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947

other info that might help us debug this:
Possible unsafe locking scenario:

       CPU0
       ----
  lock(&team->lock);
  lock(&team->lock);

*** DEADLOCK ***

May be due to missing lock nesting notation

2 locks held by syz-executor4/6391:
#0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline]
#0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4662
#1: (____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947

stack backtrace:
CPU: 1 PID: 6391 Comm: syz-executor4 Not tainted 4.18.0-rc7+ #176
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
check_deadlock kernel/locking/lockdep.c:1809 [inline]
validate_chain kernel/locking/lockdep.c:2405 [inline]
__lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
__mutex_lock_common kernel/locking/mutex.c:757 [inline]
__mutex_lock+0x176/0x1820 kernel/locking/mutex.c:894
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:909
team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868
vlan_add_rx_filter_info+0x14a/0x1d0 net/8021q/vlan_core.c:210
__vlan_vid_add net/8021q/vlan_core.c:278 [inline]
vlan_vid_add+0x63e/0x9d0 net/8021q/vlan_core.c:308
vlan_device_event.cold.12+0x2a/0x2f net/8021q/vlan.c:381
notifier_call_chain+0x180/0x390 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
call_netdevice_notifiers net/core/dev.c:1753 [inline]
dev_open+0x173/0x1b0 net/core/dev.c:1433
team_port_add drivers/net/team/team.c:1219 [inline]
team_add_slave+0xa8b/0x1c30 drivers/net/team/team.c:1948
do_set_master+0x1c9/0x220 net/core/rtnetlink.c:2248
do_setlink+0xba4/0x3e10 net/core/rtnetlink.c:2382
rtnl_setlink+0x2a9/0x400 net/core/rtnetlink.c:2636
rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4665
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2455
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4683
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
netlink_sendmsg+0xa18/0xfd0 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:642 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:652
___sys_sendmsg+0x7fd/0x930 net/socket.c:2126
__sys_sendmsg+0x11d/0x290 net/socket.c:2164
__do_sys_sendmsg net/socket.c:2173 [inline]
__se_sys_sendmsg net/socket.c:2171 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2171
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x456b29
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f9706bf8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f9706bf96d4 RCX: 0000000000456b29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004
RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d3548 R14: 00000000004c8227 R15: 0000000000000000

Fixes: 87002b03baab ("net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-and-tested-by: syzbot+bd051aba086537515cdb@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>

net/usb: cancel pending work when unbinding smsc75xx

Cancel pending work before freeing smsc75xx private data structure
during binding. This fixes the following crash in the driver:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
IP: mutex_lock+0x2b/0x3f
<snipped>
Workqueue: events smsc75xx_deferred_multicast_write [smsc75xx]
task: ffff8caa83e85700 task.stack: ffff948b80518000
RIP: 0010:mutex_lock+0x2b/0x3f
<snipped>
Call Trace:
smsc75xx_deferred_multicast_write+0x40/0x1af [smsc75xx]
process_one_work+0x18d/0x2fc
worker_thread+0x1a2/0x269
? pr_cont_work+0x58/0x58
kthread+0xfa/0x10a
? pr_cont_work+0x58/0x58
? rcu_read_unlock_sched_notrace+0x48/0x48
ret_from_fork+0x22/0x40

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2018-10-04' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just three small fixes:
* fix use-after-free in regulatory code
* fix rx-mgmt key flag in AP mode (mac80211)
* fix wireless extensions compat code memory leak
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ovl-fixes-4.19-rc7' of git://git./linux/kernel/git/mszeredi/vfs

Miklos writes:
  "overlayfs fixes for 4.19-rc7

   This update fixes a couple of regressions in the stacked file update
   added in this cycle, as well as some older bugs uncovered by
   syzkaller.

   There's also one trivial naming change that touches other parts of
   the fs subsystem."

* tag 'ovl-fixes-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix format of setxattr debug
  ovl: fix access beyond unterminated strings
  ovl: make symbol 'ovl_aops' static
  vfs: swap names of {do,vfs}_clone_file_range()
  ovl: fix freeze protection bypass in ovl_clone_file_range()
  ovl: fix freeze protection bypass in ovl_write_iter()
  ovl: fix memory leak on unlink of indexed file

dm cache: fix resize crash if user doesn't reload cache table

A reload of the cache's DM table is needed during resize because
otherwise a crash will occur when attempting to access smq policy
entries associated with the portion of the cache that was recently
extended.

The reason is cache-size based data structures in the policy will not be
resized, the only way to safely extend the cache is to allow for a
proper cache policy initialization that occurs when the cache table is
loaded. For example the smq policy's space_init(), init_allocator(),
calc_hotspot_params() must be sized based on the extended cache size.

The fix for this is to disallow cache resizes of this pattern:
1) suspend "cache" target's device
2) resize the fast device used for the cache
3) resume "cache" target's device

Instead, the last step must be a full reload of the cache's DM table.

Fixes: 66a636356 ("dm cache: add stochastic-multi-queue (smq) policy")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm cache metadata: ignore hints array being too small during resize

Commit fd2fa9541 ("dm cache metadata: save in-core policy_hint_size to
on-disk superblock") enabled previously written policy hints to be
used after a cache is reactivated. But in doing so the cache
metadata's hint array was left exposed to out of bounds access because
on resize the metadata's on-disk hint array wasn't ever extended.

Fix this by ignoring that there are no on-disk hints associated with the
newly added cache blocks. An expanded on-disk hint array is later
rewritten upon the next clean shutdown of the cache.

Fixes: fd2fa9541 ("dm cache metadata: save in-core policy_hint_size to on-disk superblock")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

PM / core: Clear the direct_complete flag on errors

If __device_suspend() runs asynchronously (in which case the device
passed to it is in dpm_suspended_list at that point) and it returns
early on an error or pending wakeup, and the power.direct_complete
flag has been set for the device already, the subsequent
device_resume() will be confused by that and it will call
pm_runtime_enable() incorrectly, as runtime PM has not been
disabled for the device by __device_suspend().

To avoid that, clear power.direct_complete if __device_suspend()
is not going to disable runtime PM for the device before returning.

Fixes: aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily)
Reported-by: Al Cooper <alcooperx@gmail.com>
Tested-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge branch 'mlxsw-fixes'

Ido Schimmel says:

====================
mlxsw: Couple of fixes

First patch works around an hardware issue in Spectrum-2 where a field
indicating the event type is always set to the same value. Since there
are only two event types and they are reported using different queues,
we can use the queue number to derive the event type.

Second patch prevents a router interface (RIF) leakage when a VLAN
device is deleted from on top a bridge device.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Delete RIF when VLAN device is removed

In commit 602b74eda813 ("mlxsw: spectrum_switchdev: Do not leak RIFs
when removing bridge") I handled the case where RIFs created for VLAN
devices were not properly cleaned up when their real device (a bridge)
was removed.

However, I forgot to handle the case of the VLAN device itself being
removed. Do so now when the VLAN device is being unlinked from its real
device.

Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reported-by: Artem Shvorin <art@qrator.net>
Tested-by: Artem Shvorin <art@qrator.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: pci: Derive event type from event queue number

Due to a hardware issue in Spectrum-2, the field event_type of the event
queue element (EQE) has become reserved. It was used to distinguish between
command interface completion events and completion events.

Use queue number to determine event type, as command interface completion
events are always received on EQ0 and mlxsw driver maps completion events
to EQ1.

Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Russell writes:
  "A couple of small ARM fixes from Stefan and Thomas:
   - Adding the io_pgetevents syscall
   - Fixing a bounds check in pci_ioremap_io()"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8799/1: mm: fix pci_ioremap_io() offset check
  ARM: 8787/1: wire up io_pgetevents syscall

Merge tag 'drm-fixes-2018-10-04' of git://anongit.freedesktop.org/drm/drm

Dave writes:
  "drm exynos, tda9950 and intel fixes

   3 i915 fixes:
     compressed error handling zlib fix
     compiler warning cleanup
     and a minor code cleanup

   2 tda9950:
     Two fixes for the HDMI CEC

   1 exynos:
     A fix required for IOMMU interaction."

* tag 'drm-fixes-2018-10-04' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: Handle incomplete Z_FINISH for compressed error states
  drm/i915: Avoid compiler warning for maybe unused gu_misc_iir
  drm/i915: Do not redefine the has_csr parameter.
  drm/exynos: Use selected dma_dev default iommu domain instead of a fake one
  drm/i2c: tda9950: set MAX_RETRIES for errors only
  drm/i2c: tda9950: fix timeout counter check

Merge tag 'xfs-fixes-for-4.19-rc6' of git://git./fs/xfs/xfs-linux

Dave writes:
  "XFS fixes for 4.19-rc6

   Accumlated regression and bug fixes for 4.19-rc6, including:

   o make iomap correctly mark dirty pages for sub-page block sizes
   o fix regression in handling extent-to-btree format conversion errors
   o fix torn log wrap detection for new logs
   o various corrupt inode detection fixes
   o various delalloc state fixes
   o cleanup all the missed transaction cancel cases missed from changes merged
     in 4.19-rc1
   o fix lockdep false positive on transaction allocation
   o fix locking and reference counting on buffer log items"

* tag 'xfs-fixes-for-4.19-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix error handling in xfs_bmap_extents_to_btree
  iomap: set page dirty after partial delalloc on mkwrite
  xfs: remove invalid log recovery first/last cycle check
  xfs: validate inode di_forkoff
  xfs: skip delalloc COW blocks in xfs_reflink_end_cow
  xfs: don't treat unknown di_flags2 as corruption in scrub
  xfs: remove duplicated include from alloc.c
  xfs: don't bring in extents in xfs_bmap_punch_delalloc_range
  xfs: fix transaction leak in xfs_reflink_allocate_cow()
  xfs: avoid lockdep false positives in xfs_trans_alloc
  xfs: refactor xfs_buf_log_item reference count handling
  xfs: clean up xfs_trans_brelse()
  xfs: don't unlock invalidated buf on aborted tx commit
  xfs: remove last of unnecessary xfs_defer_cancel() callers
  xfs: don't crash the vfs on a garbage inline symlink

Merge tag 'riscv-for-linus-4.19-rc7' of git://git./linux/kernel/git/palmer/riscv-linux

Palmer writes:
  "A Single RISC-V Fix for 4.19-rc7

   This tag contains a single patch that managed to get lost in the
   shuffle, which explains why it's so late.  This single line has been
   floating around in various patch sets for months, and fixes our DMA32
   region."

* tag 'riscv-for-linus-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISCV: Fix end PFN for low memory

drm/amdkfd: Fix incorrect use of process->mm

This mm_struct pointer should never be dereferenced. If running in
a user thread, just use current->mm. If running in a kernel worker
use get_task_mm to get a safe reference to the mm_struct.

Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Signal hw_done() after waiting for flip_done()

In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().

[Why]

This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.

Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):

**THREAD 1**                        | **THREAD 2**
                                    |
Initialize atomic state for flip    |
                                    |
Queue worker                        |
                                   ...

                                    | Do work for flip
                                    |
                                    | Signal hw_done() on CRTC 1
                                    | Signal hw_done() on CRTC 2
                                    |
                                    | Wait for flip_done() on CRTC 1

                                <---- **PREEMPTED BY THREAD 1**

Initialize atomic state for cursor  |
update (1)                          |
                                    |
Do cursor update work on both CRTCs |
                                    |
Clear atomic state (2)              |
**DONE**                            |
                                   ...
                                    |
                                    | Wait for flip_done() on CRTC 2
                                    | *ERROR*
                                    |

The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)

Some things to note:

* Due to the mirrored configuration, the cursor updates on both CRTCs.

* At this point, the pflip IRQ has already been handled, and flip_done
  signaled on all CRTCs. The cursor commit can therefore continue.

* The old_crtc_states used by the cursor update are the **same states**
  as the new_crtc_states used by the flip worker.

At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.

(*) Technically, 'state->crtcs[i].state' is freed, which was made to
    reference old_crtc_state in drm_atomic_helper_swap_state()

[How]

By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.

Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

kvm: nVMX: fix entry with pending interrupt if APICv is enabled

Commit b5861e5cf2fcf83031ea3e26b0a69d887adf7d21 introduced a check on
the interrupt-window and NMI-window CPU execution controls in order to
inject an external interrupt vmexit before the first guest instruction
executes. However, when APIC virtualization is enabled the host does not
need a vmexit in order to inject an interrupt at the next interrupt window;
instead, it just places the interrupt vector in RVI and the processor will
inject it as soon as possible. Therefore, on machines with APICv it is
not enough to check the CPU execution controls: the same scenario can also
happen if RVI>vPPR.

Fixes: b5861e5cf2fcf83031ea3e26b0a69d887adf7d21
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ovl: fix format of setxattr debug

Format has a typo: it was meant to be "%.*s", not "%*s". But at some point
callers grew nonprintable values as well, so use "%*pE" instead with a
maximized length.

Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3a1e819b4e80 ("ovl: store file handle of lower inode on copy up")
Cc: <stable@vger.kernel.org> # v4.12

ovl: fix access beyond unterminated strings

KASAN detected slab-out-of-bounds access in printk from overlayfs,
because string format used %*s instead of %.*s.

> BUG: KASAN: slab-out-of-bounds in string+0x298/0x2d0 lib/vsprintf.c:604
> Read of size 1 at addr ffff8801c36c66ba by task syz-executor2/27811
>
> CPU: 0 PID: 27811 Comm: syz-executor2 Not tainted 4.19.0-rc5+ #36
...
> printk+0xa7/0xcf kernel/printk/printk.c:1996
> ovl_lookup_index.cold.15+0xe8/0x1f8 fs/overlayfs/namei.c:689

Reported-by: syzbot+376cea2b0ef340db3dd4@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 359f392ca53e ("ovl: lookup index entry for copy up origin")
Cc: <stable@vger.kernel.org> # v4.13

KVM: VMX: hide flexpriority from guest when disabled at the module level

As of commit 8d860bbeedef ("kvm: vmx: Basic APIC virtualization controls
have three settings"), KVM will disable VIRTUALIZE_APIC_ACCESSES when
a nested guest writes APIC_BASE MSR and kvm-intel.flexpriority=0,
whereas previously KVM would allow a nested guest to enable
VIRTUALIZE_APIC_ACCESSES so long as it's supported in hardware. That is,
KVM now advertises VIRTUALIZE_APIC_ACCESSES to a guest but doesn't
(always) allow setting it when kvm-intel.flexpriority=0, and may even
initially allow the control and then clear it when the nested guest
writes APIC_BASE MSR, which is decidedly odd even if it doesn't cause
functional issues.

Hide the control completely when the module parameter is cleared.

reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Fixes: 8d860bbeedef ("kvm: vmx: Basic APIC virtualization controls have three settings")
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: VMX: check for existence of secondary exec controls before accessing

Return early from vmx_set_virtual_apic_mode() if the processor doesn't
support VIRTUALIZE_APIC_ACCESSES or VIRTUALIZE_X2APIC_MODE, both of
which reside in SECONDARY_VM_EXEC_CONTROL. This eliminates warnings
due to VMWRITEs to SECONDARY_VM_EXEC_CONTROL (VMCS field 401e) failing
on processors without secondary exec controls.

Remove the similar check for TPR shadowing as it is incorporated in the
flexpriority_enabled check and the APIC-related code in
vmx_update_msr_bitmap() is further gated by VIRTUALIZE_X2APIC_MODE.

Reported-by: Gerhard Wiesinger <redhat@wiesinger.com>
Fixes: 8d860bbeedef ("kvm: vmx: Basic APIC virtualization controls have three settings")
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

x86/vdso: Fix vDSO syscall fallback asm constraint regression

When I added the missing memory outputs, I failed to update the
index of the first argument (ebx) on 32-bit builds, which broke the
fallbacks. Somehow I must have screwed up my testing or gotten
lucky.

Add another test to cover gettimeofday() as well.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 715bd9d12f84 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks")
Link: http://lkml.kernel.org/r/21bd45ab04b6d838278fa5bebfa9163eceffa13c.1538608971.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760

The issue is the same as commit dd9aa335c880 ("ALSA: hda/realtek - Can't
adjust speaker's volume on a Dell AIO"), the output requires to connect
to a node with Amp-out capability.

Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue.

BugLink: https://bugs.launchpad.net/bugs/1775068
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

KVM: PPC: Book3S HV: Avoid crash from THP collapse during radix page fault

Commit 71d29f43b633 ("KVM: PPC: Book3S HV: Don't use compound_order to
determine host mapping size", 2018-09-11) added a call to
__find_linux_pte() and a dereference of the returned PTE pointer to the
radix page fault path in the common case where the page is normal
system memory. Previously, __find_linux_pte() was only called for
mappings to physical addresses which don't have a page struct (e.g.
memory-mapped I/O) or where the page struct is marked as reserved
memory.

This exposes us to the possibility that the returned PTE pointer
could be NULL, for example in the case of a concurrent THP collapse
operation. Dereferencing the returned NULL pointer causes a host
crash.

To fix this, we check for NULL, and if it is NULL, we retry the
operation by returning to the guest, with the expectation that it
will generate the same page fault again (unless of course it has
been fixed up by another CPU in the meantime).

Fixes: 71d29f43b633 ("KVM: PPC: Book3S HV: Don't use compound_order to determine host mapping size")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Merge branch 'drm-tda9950-fixes' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-fixes

two tda9950 fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Russell King <rmk@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001162948.GA9508@rmk-PC.armlinux.org.uk

Merge tag 'drm-intel-fixes-2018-10-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

There's one fix for our zlib incomlete Z_FINISH on our error state handling,
plus a compilation warning fix and a tiny code clean up.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003202840.GA23560@intel.com

Merge gitolite./pub/scm/linux/kernel/git/davem/net

David writes:
  "Networking fixes:
   1) Prefix length validation in xfrm layer, from Steffen Klassert.

   2) TX status reporting fix in mac80211, from Andrei Otcheretianski.

   3) Fix hangs due to TX_DROP in mac80211, from Bob Copeland.

   4) Fix DMA error regression in b43, from Larry Finger.

   5) Add input validation to xenvif_set_hash_mapping(), from Jan Beulich.

   6) SMMU unmapping fix in hns driver, from Yunsheng Lin.

   7) Bluetooh crash in unpairing on SMP, from Matias Karhumaa.

   8) WoL handling fixes in the phy layer, from Heiner Kallweit.

   9) Fix deadlock in bonding, from Mahesh Bandewar.

   10) Fill ttl inherit infor in vxlan driver, from Hangbin Liu.

   11) Fix TX timeouts during netpoll, from Michael Chan.

   12) RXRPC layer fixes from David Howells.

   13) Another batch of ndo_poll_controller() removals to deal with
       excessive resource consumption during load.  From Eric Dumazet.

   14) Fix a specific TIPC failure secnario, from LUU Duc Canh.

   15) Really disable clocks in r8169 during suspend so that low
       power states can actually be reached.

   16) Fix SYN backlog lockdep issue in tcp and dccp, from Eric Dumazet.

   17) Fix RCU locking in netpoll SKB send, which shows up in bonding,
       from Dave Jones.

   18) Fix TX stalls in r8169, from Heiner Kallweit.

   19) Fix locksup in nfp due to control message storms, from Jakub
       Kicinski.

   20) Various rmnet bug fixes from Subash Abhinov Kasiviswanathan and
       Sean Tranchetti.

   21) Fix use after free in ip_cmsg_recv_dstaddr(), from Eric Dumazet."

* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (122 commits)
  ixgbe: check return value of napi_complete_done()
  sctp: fix fall-through annotation
  r8169: always autoneg on resume
  ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()
  net: qualcomm: rmnet: Fix incorrect allocation flag in receive path
  net: qualcomm: rmnet: Fix incorrect allocation flag in transmit
  net: qualcomm: rmnet: Skip processing loopback packets
  net: systemport: Fix wake-up interrupt race during resume
  rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096
  bonding: fix warning message
  inet: make sure to grab rcu_read_lock before using ireq->ireq_opt
  nfp: avoid soft lockups under control message storm
  declance: Fix continuation with the adapter identification message
  net: fec: fix rare tx timeout
  r8169: fix network stalls due to missing bit TXCFG_AUTO_FIFO
  tun: napi flags belong to tfile
  tun: initialize napi_mutex unconditionally
  tun: remove unused parameters
  bond: take rcu lock in netpoll_send_skb_on_dev
  rtnetlink: Fail dump if target netnsid is invalid
  ...

ixgbe: check return value of napi_complete_done()

The NIC driver should only enable interrupts when napi_complete_done()
returns true. This patch adds the check for ixgbe.

Cc: stable@vger.kernel.org # 4.10+
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-kselftest-4.19-rc7' of git://git./linux/kernel/git/shuah/linux-kselftest

Shuah writes:
  "kselftest fixes for 4.19-rc7

   This fixes update for 4.19-rc7 consists one fix to rseq test to
   prevent it from seg-faulting when compiled with -fpie."

* tag 'linux-kselftest-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  rseq/selftests: fix parametrized test with -fpie

sctp: fix fall-through annotation

Replace "fallthru" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm/i915: Handle incomplete Z_FINISH for compressed error states

The final call to zlib_deflate(Z_FINISH) may require more output
space to be allocated and so needs to re-invoked. Failure to do so in
the current code leads to incomplete zlib streams (albeit intact due to
the use of Z_SYNC_FLUSH) resulting in the occasional short object
capture.

v2: Check against overrunning our pre-allocated page array
v3: Drop Z_SYNC_FLUSH entirely

Testcase: igt/i915-error-capture.js
Fixes: 0a97015d45ee ("drm/i915: Compress GPU objects in error state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003082422.23214-1-chris@chris-wilson.co.uk
(cherry picked from commit 83bc0f5b432f60394466deef16fc753e27371d0b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'media/v4.19-3' of git://git./linux/kernel/git/mchehab/linux-media

Mauro writes:
"media fixes for v4.19-rc6"

* tag 'media/v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: v4l: event: Prevent freeing event subscriptions while accessed

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Jiri writes:
  "HID fixes:
   - hantick touchpad fix from Anisse Astier
   - device ID addition for Ice Lake mobile from Srinivas Pandruvada
   - touchscreen resume fix for certain i2c-hid driven devices from Hans
     de Goede"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: intel-ish-hid: Enable Ice Lake mobile
  HID: i2c-hid: Remove RESEND_REPORT_DESCR quirk and its handling
  HID: i2c-hid: disable runtime PM operations on hantick touchpad

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs

Al writes:
"xattrs regression fix from Andreas; sat in -next for quite a while."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
sysfs: Do not return POSIX ACL xattrs via listxattr

media: v4l: event: Prevent freeing event subscriptions while accessed

The event subscriptions are added to the subscribed event list while
holding a spinlock, but that lock is subsequently released while still
accessing the subscription object. This makes it possible to unsubscribe
the event --- and freeing the subscription object's memory --- while
the subscription object is simultaneously accessed.

Prevent this by adding a mutex to serialise the event subscription and
unsubscription. This also gives a guarantee to the callback ops that the
add op has returned before the del op is called.

This change also results in making the elems field less special:
subscriptions are only added to the event list once they are fully
initialised.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # for 4.14 and up
Fixes: c3b5b0241f62 ("V4L/DVB: V4L: Events: Add backend")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

locking/ww_mutex: Fix runtime warning in the WW mutex selftest

If CONFIG_WW_MUTEX_SELFTEST=y is enabled, booting an image
in an arm64 virtual machine results in the following
traceback if 8 CPUs are enabled:

  DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
  WARNING: CPU: 2 PID: 537 at kernel/locking/mutex.c:1033 __mutex_unlock_slowpath+0x1a8/0x2e0
  ...
  Call trace:
   __mutex_unlock_slowpath()
   ww_mutex_unlock()
   test_cycle_work()
   process_one_work()
   worker_thread()
   kthread()
   ret_from_fork()

If requesting b_mutex fails with -EDEADLK, the error variable
is reassigned to the return value from calling ww_mutex_lock
on a_mutex again. If this call fails, a_mutex is not locked.
It is, however, unconditionally unlocked subsequently, causing
the reported warning. Fix the problem by using two error variables.

With this change, the selftest still fails as follows:

  cyclic deadlock not resolved, ret[7/8] = -35

However, the traceback is gone.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: d1b42b800e5d0 ("locking/ww_mutex: Add kselftests for resolving ww_mutex cyclic deadlocks")
Link: http://lkml.kernel.org/r/1538516929-9734-1-git-send-email-linux@roeck-us.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>