Gabor Juhos [Sat, 31 Dec 2011 15:02:32 +0000 (15:02 +0000)]
package/base-files: use case statement in led init script
SVN-Revision: 29628
Gabor Juhos [Sat, 31 Dec 2011 15:02:30 +0000 (15:02 +0000)]
kernel: swconfig: introduce a generic switch LED trigger
SVN-Revision: 29627
Gabor Juhos [Sat, 31 Dec 2011 15:02:26 +0000 (15:02 +0000)]
ar71xx: ag71xx: implement get_port_{link,stats} callbacks
SVN-Revision: 29626
Gabor Juhos [Sat, 31 Dec 2011 15:02:24 +0000 (15:02 +0000)]
kernel: swconfig: add get_port_{link,stats} callbacks
SVN-Revision: 29625
Gabor Juhos [Sat, 31 Dec 2011 13:54:11 +0000 (13:54 +0000)]
ar71xx: fix LEDs on the WRT400N
SVN-Revision: 29624
Gabor Juhos [Wed, 28 Dec 2011 08:43:43 +0000 (08:43 +0000)]
ramips: rt288x: add support for the Belkin
F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 29617
Gabor Juhos [Wed, 28 Dec 2011 08:43:36 +0000 (08:43 +0000)]
ramips: rt288x: change base address and window size of flash bank 0
SVN-Revision: 29616
Gabor Juhos [Wed, 28 Dec 2011 08:43:32 +0000 (08:43 +0000)]
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
SVN-Revision: 29615
Gabor Juhos [Tue, 27 Dec 2011 16:59:43 +0000 (16:59 +0000)]
ar71xx: enable sysupgrade support for airrouter
Works for me! ;-)
Patch-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 29614
Gabor Juhos [Tue, 27 Dec 2011 16:57:01 +0000 (16:57 +0000)]
ar71xx: fix sysupgrade on PB42/PB44 boards
SVN-Revision: 29613
Gabor Juhos [Tue, 27 Dec 2011 16:56:30 +0000 (16:56 +0000)]
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
SVN-Revision: 29612
Jo-Philipp Wich [Sun, 25 Dec 2011 13:59:17 +0000 (13:59 +0000)]
add usbreset - a small simple utility to send port rests to selected usb devices (#10394)
SVN-Revision: 29611
Jo-Philipp Wich [Sun, 25 Dec 2011 13:33:18 +0000 (13:33 +0000)]
add missing config symbol
SVN-Revision: 29610
Jo-Philipp Wich [Sun, 25 Dec 2011 13:32:53 +0000 (13:32 +0000)]
package CT target
SVN-Revision: 29609
Felix Fietkau [Fri, 23 Dec 2011 19:24:38 +0000 (19:24 +0000)]
mac80211: clean up init, remove some redundant checks, fix tx power init (#10113)
SVN-Revision: 29606
Hauke Mehrtens [Fri, 23 Dec 2011 17:21:52 +0000 (17:21 +0000)]
brcm47xx: fix usb on more recent bcma based devices.
SVN-Revision: 29605
Gabor Juhos [Fri, 23 Dec 2011 14:27:16 +0000 (14:27 +0000)]
ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 29604
Gabor Juhos [Fri, 23 Dec 2011 14:27:10 +0000 (14:27 +0000)]
ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29603
Gabor Juhos [Fri, 23 Dec 2011 14:27:05 +0000 (14:27 +0000)]
ramips: define firmware partition for Omnima MiniEMBWiFi
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
SVN-Revision: 29602
Felix Fietkau [Thu, 22 Dec 2011 08:45:13 +0000 (08:45 +0000)]
kernel: enable magic sysrq by default, it does not add much to the kernel image size, but is useful for debugging many kinds of hangs/crashes
SVN-Revision: 29600
Felix Fietkau [Thu, 22 Dec 2011 05:43:53 +0000 (05:43 +0000)]
ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547)
SVN-Revision: 29598
Jonas Gorski [Wed, 21 Dec 2011 19:32:40 +0000 (19:32 +0000)]
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
Thanks netprince for reporting and testing.
SVN-Revision: 29595
Jo-Philipp Wich [Wed, 21 Dec 2011 01:27:48 +0000 (01:27 +0000)]
the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)
SVN-Revision: 29593
Jo-Philipp Wich [Tue, 20 Dec 2011 17:25:15 +0000 (17:25 +0000)]
base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.
SVN-Revision: 29587
Jo-Philipp Wich [Tue, 20 Dec 2011 01:10:15 +0000 (01:10 +0000)]
firewall: - introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them - annotate default traffic rules with names - bump version
SVN-Revision: 29577
Hauke Mehrtens [Mon, 19 Dec 2011 23:55:20 +0000 (23:55 +0000)]
brcm47xx: remove patch starting adding brcm4716 to ssb
brcm4716 is supported by bcma now we do not need this patch
SVN-Revision: 29576
Hauke Mehrtens [Mon, 19 Dec 2011 23:39:13 +0000 (23:39 +0000)]
brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.
SVN-Revision: 29575
Hauke Mehrtens [Mon, 19 Dec 2011 23:33:03 +0000 (23:33 +0000)]
kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
SVN-Revision: 29574
Hauke Mehrtens [Mon, 19 Dec 2011 23:26:15 +0000 (23:26 +0000)]
brcm47xx: remove support for kernel 2.6.39
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.
SVN-Revision: 29573
Hauke Mehrtens [Mon, 19 Dec 2011 23:23:34 +0000 (23:23 +0000)]
mac80211: deactivate mac80211 tracing
Activating tracing on kernel <= 2.6.32 causes build errors.
SVN-Revision: 29572
Felix Fietkau [Mon, 19 Dec 2011 15:51:20 +0000 (15:51 +0000)]
ath9k: fix another tx locking issue
SVN-Revision: 29570
Felix Fietkau [Mon, 19 Dec 2011 10:27:28 +0000 (10:27 +0000)]
mac80211: fix powersave setting
SVN-Revision: 29569
Felix Fietkau [Mon, 19 Dec 2011 09:04:15 +0000 (09:04 +0000)]
ar71xx: add missing wireless led changes for wzr-hp-g300nh2
SVN-Revision: 29568
Felix Fietkau [Sun, 18 Dec 2011 22:20:17 +0000 (22:20 +0000)]
ar71xx: add support for the wzr-hp-g300nh2
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
SVN-Revision: 29567
Felix Fietkau [Sun, 18 Dec 2011 22:19:21 +0000 (22:19 +0000)]
mac80211: apply txpower after bringing up the interface, should fix #10113
SVN-Revision: 29566
Felix Fietkau [Sun, 18 Dec 2011 22:18:46 +0000 (22:18 +0000)]
mac80211: use iw instead of iwconfig to disable powersave
SVN-Revision: 29565
Felix Fietkau [Sun, 18 Dec 2011 22:17:34 +0000 (22:17 +0000)]
ath9k: fix some issues in the btcoex disable patch
SVN-Revision: 29564
Gabor Juhos [Sat, 17 Dec 2011 18:49:55 +0000 (18:49 +0000)]
ar71xx: use 64kraw template on more TP-Link boards
SVN-Revision: 29561
Felix Fietkau [Sat, 17 Dec 2011 14:28:25 +0000 (14:28 +0000)]
ath9k: fix a locking issue in the tx path
SVN-Revision: 29560
Felix Fietkau [Sat, 17 Dec 2011 14:28:20 +0000 (14:28 +0000)]
hostapd: add missing check for wds stations
SVN-Revision: 29559
Felix Fietkau [Fri, 16 Dec 2011 23:41:44 +0000 (23:41 +0000)]
ath9k: fix a crash in led init
SVN-Revision: 29558
Gabor Juhos [Thu, 15 Dec 2011 22:25:38 +0000 (22:25 +0000)]
ar71xx: connect GMAC0 to the internal switch on DB120
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
SVN-Revision: 29557
Gabor Juhos [Thu, 15 Dec 2011 22:25:36 +0000 (22:25 +0000)]
ar71xx: add defines for the AR934X GMAC interface
SVN-Revision: 29556
Gabor Juhos [Thu, 15 Dec 2011 22:25:35 +0000 (22:25 +0000)]
ar71xx: fix GMAC1 interface speed on the DB120 board
SVN-Revision: 29555
Gabor Juhos [Thu, 15 Dec 2011 22:25:32 +0000 (22:25 +0000)]
ar71xx: ag71xx: fix switch port setup for AR934X
SVN-Revision: 29554
Gabor Juhos [Thu, 15 Dec 2011 22:25:30 +0000 (22:25 +0000)]
ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
SVN-Revision: 29553
Gabor Juhos [Thu, 15 Dec 2011 22:25:29 +0000 (22:25 +0000)]
ar71xx: ag71xx: setup switch interface mode on AR934X
SVN-Revision: 29552
Gabor Juhos [Thu, 15 Dec 2011 22:25:28 +0000 (22:25 +0000)]
ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
SVN-Revision: 29551
Gabor Juhos [Thu, 15 Dec 2011 22:25:22 +0000 (22:25 +0000)]
ar71xx: allow to attach the internal switch for AR934x
SVN-Revision: 29550
Gabor Juhos [Thu, 15 Dec 2011 22:25:11 +0000 (22:25 +0000)]
ar71xx: introduce ar71xx_switch_data
SVN-Revision: 29549
Gabor Juhos [Thu, 15 Dec 2011 22:03:48 +0000 (22:03 +0000)]
ar71xx: build images for TL-WR741N/ND v2
SVN-Revision: 29548
Gabor Juhos [Thu, 15 Dec 2011 22:03:46 +0000 (22:03 +0000)]
ar71x: use raw squashfs images for TP-Link boards
SVN-Revision: 29547
Gabor Juhos [Thu, 15 Dec 2011 22:03:45 +0000 (22:03 +0000)]
ar71xx: create a template for using unpadded squashfs images
SVN-Revision: 29546
Gabor Juhos [Thu, 15 Dec 2011 22:03:44 +0000 (22:03 +0000)]
ar71xx: put squash image right after the kernel on TP-Link boards
SVN-Revision: 29545
Gabor Juhos [Thu, 15 Dec 2011 22:03:42 +0000 (22:03 +0000)]
firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image
SVN-Revision: 29544
Gabor Juhos [Thu, 15 Dec 2011 22:03:40 +0000 (22:03 +0000)]
ar71xx: tplinkpart: allow to detect JFFS2 as well
SVN-Revision: 29543
Gabor Juhos [Thu, 15 Dec 2011 13:25:23 +0000 (13:25 +0000)]
ar71xx: ag71xx: check PHY IDs before accessing the switch registers
SVN-Revision: 29541
Gabor Juhos [Thu, 15 Dec 2011 13:25:21 +0000 (13:25 +0000)]
ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x
SVN-Revision: 29540
Gabor Juhos [Thu, 15 Dec 2011 13:25:20 +0000 (13:25 +0000)]
ar71xx: ag71xx: nuke ar7240sw_init
SVN-Revision: 29539
Gabor Juhos [Thu, 15 Dec 2011 13:25:18 +0000 (13:25 +0000)]
ar71xx: fix mac addresses on jjPlus devices
SVN-Revision: 29538
Felix Fietkau [Wed, 14 Dec 2011 21:03:52 +0000 (21:03 +0000)]
ath9k: fix a locking issue
SVN-Revision: 29537
Gabor Juhos [Wed, 14 Dec 2011 20:54:11 +0000 (20:54 +0000)]
ar71xx: build image for the Hornet-UB board
SVN-Revision: 29536
Gabor Juhos [Wed, 14 Dec 2011 20:54:10 +0000 (20:54 +0000)]
ar71xx: add support for ALFA Network's Hornet-UB board
SVN-Revision: 29535
Gabor Juhos [Wed, 14 Dec 2011 20:54:07 +0000 (20:54 +0000)]
ar71xx: add GPIO function bit defines for AR933X
SVN-Revision: 29534
Gabor Juhos [Wed, 14 Dec 2011 20:51:26 +0000 (20:51 +0000)]
ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
SVN-Revision: 29533
Felix Fietkau [Wed, 14 Dec 2011 20:47:24 +0000 (20:47 +0000)]
ar71xx: fix gpio count for ar7241/ar7242
SVN-Revision: 29532
Felix Fietkau [Wed, 14 Dec 2011 20:21:42 +0000 (20:21 +0000)]
ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
SVN-Revision: 29531
Felix Fietkau [Wed, 14 Dec 2011 20:21:36 +0000 (20:21 +0000)]
ath9k: add support for registering extra leds connected to the wmac gpio lines
SVN-Revision: 29530
Gabor Juhos [Tue, 13 Dec 2011 20:41:24 +0000 (20:41 +0000)]
ar71xx: get rid of squashfs-4k images
SVN-Revision: 29522
Gabor Juhos [Tue, 13 Dec 2011 20:41:22 +0000 (20:41 +0000)]
generic: disable 'small sector' erase in m25p80 driver
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html
SVN-Revision: 29521
Felix Fietkau [Tue, 13 Dec 2011 15:34:08 +0000 (15:34 +0000)]
image: increase squashfs block size - visibly reduces image size in many cases
SVN-Revision: 29519
Jo-Philipp Wich [Tue, 13 Dec 2011 15:29:45 +0000 (15:29 +0000)]
kernel: rename kmod-switch-rtl8366_smi to kmod-switch-rtl8366-smi to avoid underscores in package names
SVN-Revision: 29518
Felix Fietkau [Tue, 13 Dec 2011 15:14:59 +0000 (15:14 +0000)]
kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets
SVN-Revision: 29516
Felix Fietkau [Tue, 13 Dec 2011 15:00:43 +0000 (15:00 +0000)]
ar71xx: fix wireless led on wzr-hp-g450h
SVN-Revision: 29515
Gabor Juhos [Tue, 13 Dec 2011 14:59:43 +0000 (14:59 +0000)]
ar71xx: enable AR9341 support at setup.c
Patch-by: dyq <729650915@qq.com>
SVN-Revision: 29514
Gabor Juhos [Tue, 13 Dec 2011 14:59:40 +0000 (14:59 +0000)]
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 29513
Felix Fietkau [Tue, 13 Dec 2011 13:51:05 +0000 (13:51 +0000)]
busybox: disable "mesg" by default
SVN-Revision: 29510
Felix Fietkau [Tue, 13 Dec 2011 13:33:44 +0000 (13:33 +0000)]
ar71xx: add gpios and usb for wzr-hp-g450h
SVN-Revision: 29509
Jo-Philipp Wich [Mon, 12 Dec 2011 17:26:13 +0000 (17:26 +0000)]
hostapd: support optional argument for the -v switch of hostapd and wpa_supplicant to query build features, e.g. hostapd -veap to test whether 802.11i support is compiled in
SVN-Revision: 29507
Felix Fietkau [Mon, 12 Dec 2011 14:42:35 +0000 (14:42 +0000)]
mac80211: make mesh support optional
SVN-Revision: 29506
Gabor Juhos [Sun, 11 Dec 2011 15:52:47 +0000 (15:52 +0000)]
ar71xx: use RedBoot parser on PB44
SVN-Revision: 29501
Nicolas Thill [Sat, 10 Dec 2011 22:02:50 +0000 (22:02 +0000)]
include/package-ipkg.mk: fix typo in r29449
SVN-Revision: 29497
Felix Fietkau [Sat, 10 Dec 2011 21:17:19 +0000 (21:17 +0000)]
mac80211: merge another upstream aggregation fix
SVN-Revision: 29496
Felix Fietkau [Sat, 10 Dec 2011 21:17:12 +0000 (21:17 +0000)]
ath9k: disable bluetooth coexistence support to reduce module size
SVN-Revision: 29495
Felix Fietkau [Sat, 10 Dec 2011 21:17:07 +0000 (21:17 +0000)]
ath9k: improve handling of blockackreq (should improve aggregation behavior under tough wifi conditions with lots of retransmission)
SVN-Revision: 29494
Felix Fietkau [Sat, 10 Dec 2011 21:16:58 +0000 (21:16 +0000)]
mac80211: merge an upstream fix for an aggregation related race condition
SVN-Revision: 29493
John Crispin [Fri, 9 Dec 2011 07:52:10 +0000 (07:52 +0000)]
convert to gpiolib
Signed-off-by: karlp@tweak.net.au
SVN-Revision: 29486
Hauke Mehrtens [Thu, 8 Dec 2011 22:53:13 +0000 (22:53 +0000)]
mac80211: add support for firmware 666.2 for b43 devices
SVN-Revision: 29485
Jo-Philipp Wich [Thu, 8 Dec 2011 16:49:45 +0000 (16:49 +0000)]
librpc: do not build if external or native toolchains are used
SVN-Revision: 29484
Gabor Juhos [Wed, 7 Dec 2011 06:55:50 +0000 (06:55 +0000)]
ar71xx: fix WNDR3x00 factory image generation
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.
This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 29473
Gabor Juhos [Wed, 7 Dec 2011 06:55:39 +0000 (06:55 +0000)]
ar71xx: fix WNDR3x00 model detection
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.
r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.
I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 29472
Gabor Juhos [Tue, 6 Dec 2011 20:06:08 +0000 (20:06 +0000)]
ramips: fix mac addresses on the DIR-300/600 boards
SVN-Revision: 29471
Jonas Gorski [Tue, 6 Dec 2011 19:50:30 +0000 (19:50 +0000)]
linux: update 3.1 to 3.1.4
SVN-Revision: 29470
Jonas Gorski [Tue, 6 Dec 2011 19:50:25 +0000 (19:50 +0000)]
linux: update 3.0 to 3.0.12
SVN-Revision: 29469
Gabor Juhos [Tue, 6 Dec 2011 16:26:44 +0000 (16:26 +0000)]
ar71xx: create firmware image for the TL-WR740N/ND v4 boards
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>
SVN-Revision: 29468
Gabor Juhos [Tue, 6 Dec 2011 16:26:43 +0000 (16:26 +0000)]
ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw
SVN-Revision: 29467
Gabor Juhos [Tue, 6 Dec 2011 16:26:41 +0000 (16:26 +0000)]
tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layout
SVN-Revision: 29466
Felix Fietkau [Tue, 6 Dec 2011 16:00:00 +0000 (16:00 +0000)]
ubus: update to the latest version
SVN-Revision: 29465
Felix Fietkau [Tue, 6 Dec 2011 15:59:53 +0000 (15:59 +0000)]
libubox: update to latest version, fix some endian issues
SVN-Revision: 29464
Gabor Juhos [Tue, 6 Dec 2011 13:53:21 +0000 (13:53 +0000)]
ar71xx: fix TL-MR3x20 profile names in image/Makefile
SVN-Revision: 29463
projects / openwrt / staging / blocktrron.git / log