mt76: update to Git HEAD (2024-10-10)

86b41a32a5ac wifi: mac80211: don't use rate mask for offchannel TX either
82a452919f52 wifi: mac80211: handle ieee80211_radar_detected() for MLO
02c07fe539b4 wifi: mt76: mt7996: fix rx filter setting for bfee functionality
a902bfa6db2f wifi: mt76: mt7915: disable the second PCIe link for MT7915
a7d48cd3ed34 wifi: mt76: mt7915: reduce the number of command retries
0d8474602a9b wifi: mt76: mt7915: decrease timeout for commonly issued MCU commands
5f6051569639 wifi: mt76: mt7915: add module param to select 5 GHz or 6 GHz on MT7916
f5bccb122305 wifi: mt76: mt7996: fix invalid interface combinations
6a1199463fc8 wifi: mt76: mt7915: Fix an error handling path in mt7915_add_interface()

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mpc85xx: handle MSM460 wifi mac in dts

Userspace handling is deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

kernel: netdevices: add RmNet MAP support

RmNet driver provides a transport agnostic MAP (multiplexing and
aggregation protocol) support in embedded module. Module provides
virtual network devices which can be attached to any IP-mode
physical device.

This is commonly used on Qualcomm based modems for data aggregation.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>

kernel: backport upstream commit that allows leaving out .ndo_get_stats64

Fixes mac80211 backport device statistics.

Fixes: #16642
Signed-off-by: Felix Fietkau <nbd@nbd.name>

generic: net: phy: use all SerDes MAC interface modes

Instead of forcing 2.5G PHYs into rate-adapter mode which results higher
energy consumption, lack of support for half-duplex modes and typically
worse performance when linked at speeds less than 2.5G, use SGMII mode
which allows the MAC to follow the PHY speed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: net: phy: realtek: various improvements

Follow the advise of Russell King allows to greatly improve the driver
for RealTek's 1G and 2.5G Ethernet PHYs. The results are full/half
duplex as well as Gbit master/slave property being read from PHY
Specific Status Register (PHYSR), and fixes regarding link-partner
advertisement.

Fixes: #14504
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: update MediaTek PHY patchset

The previous iteration of MediaTek's PHY patches caused various weird bugs.
Drop culprit patch 733-10-net-phy-mediatek-Extend-1G-TX-RX-link-pulse-time.patch
and use the most recent iteration of the patchset which has been posted to the
netdev mailing list.

Link: https://patchwork.kernel.org/project/netdevbpf/list/?series=895513&state=*
Fixes: #16448
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

toplevel.mk: add target feeds in 'make distclean'

When 'make distclean' is called, remove the target feeds.
Otherwise the directory target/linux/feeds/ (with broken symlinks) still
exists after a distclean.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/mailman.115093.1726741692.1280.openwrt-devel@lists.openwrt.org/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gpio-button-hotplug: skip disabled buttons

Ignore buttons which are disabled in the devicetree.

Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/mailman.117522.1727194512.1280.openwrt-devel@lists.openwrt.org/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ubnt-ledbar: fix compilation error

Wrong variable name from copy/paste.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16640
Signed-off-by: Robert Marko <robimarko@gmail.com>

valgrind: Remove unsupported configure options.

These options are not recognized by the valgrind configure script,
remove them.

Link: https://github.com/openwrt/openwrt/pull/16633
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

valgrind: Fix build on ARMv7

The valgrind configure script checks if host_cpu is set to armv7 or arm.
By default --host is set to arm-openwrt-linux and the host_cpu variable
is set to arm. Then the valgrind build tries to compile valgrind for
armv6 and fails. Set it explicitly to armv7 to compile valgrind with
armv7 support.

Fixes: 1a55d90320c1 ("valgrind: Update to version 3.23")
Link: https://github.com/openwrt/openwrt/pull/16633
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: gpio-rb91x-key: use devm for mutex_init

mutex_destroy is not called in any error paths or in _remove. Just use
devm to do so.

Removed a pointless platform_set_devdata call. Not needed with all of
the devm conversions.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16630
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath79: gpio-rb4xx: use devm_mutex_init

Also use devm for gpiochip_add_data.

Allows completely removing the _remove function.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16622
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: add support for SKSpruce WIA3300-20

Specification
-------------
- SoC       : Qualcomm IPQ4019
- RAM       : 256 MiB DDR3 (NT5CC128M16JR-EK)
- Flash     : 64 MiB SPI NOR (Winbond W25Q512JVFQ)
- WLAN      : IPQ4019 built-in
  - 2.4 GHz : 2x2 MIMO WiFi4
  - 5 GHz   : 2x2 MIMO WiFi5
- Ethernet  : QCA8075 10/100/1000 Mbps 1x WAN (ETH1, PoE); 1x LAN (ETH2)
- USB       : 1x 2.0 Type-A
- UART      : 3.3V, 115200n8
- Buttons   : 1x Reset
- LEDs      : 1x RUN (lime & red)
              1x WiFi 2.4 GHz (lime)
              1x WiFi 5 GHz (lime)
              2x ETH (lime), controlled by the QCA8075 phy
- Power     : DC 12V & 802.3at PoE
- FCC ID    : 2AHKT-WIA3300-20
- TFTP IP   :
  - client  : 192.168.18.254
  - router  : 192.168.18.1

Installation
------------
1. Open uart console and start TFTP server. Copy initramfs image to
   the TFTP root directory and rename it to 'ipqinitramfs.bin'.
2. Power on and press 'Enter' to exit to the u-boot console according
   to the TTL log prompt.
3. Execute commands to load the initramfs image:
   tftpboot && bootm
4. Enter into OpenWrt to backup the partitions if you want to restore
   the stock firmware one day.
5. Override default 'bootcmd' environment variable in u-boot console:
   env set bootcmd 'sf probe && sf read $loadaddr 0x980000 0x800000 && bootm $loadaddr'
   env save
6. Repeat step 3 and flash 'sysupgrade' image in OpenWrt.

Recovery and return to stock
----------------------------
1. Restore the backup firmware partitions in the installation step 4.
2. Restore `bootcmd` environment variable via commands:
   env set bootcmd bootipq && env save

MAC addresses
-------------
+---------+-------------------+
|         | MAC example       |
+---------+-------------------+
| LABEL   | xx:xx:xx:xx:xx:25 |
| LAN     | xx:xx:xx:xx:xx:26 |
| WAN     | xx:xx:xx:xx:xx:25 |
| WLAN 2g | xx:xx:xx:xx:xx:28 |
| WLAN 5g | xx:xx:xx:xx:xx:29 |
+---------+-------------------+

Notice
-----------
1. Some CH340 USB-TTL module doesn't work on this device.
2. The 'firmware' partition consists of four parts in the vendor
   layout:
     * Name            Start           Size
     * rootfs          0x980000        0x1680000
     * 0:HLOS1         0x2000000       0x800000
     * rootfs_1        0x2800000       0x1400000
     * rootfs_data     0x3c00000       0x350000
3. User can control the USB power supply via commands:
   echo enabled > /sys/devices/platform/output-usb-power/state
   echo disabled > /sys/devices/platform/output-usb-power/state

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: generic: enable userspace regulator consumer driver

It can be used to control the power on/off status for the fixed
voltage regulator via sysfs.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq-wifi: update to latest version 2024-10-08

dcbab62 ipq40xx: add BDFs for SKSpruce WIA3300-20

A new board file package "ipq-wifi-skspruce_wia3300-20" will be
added for the incoming device SKSpruce WIA3300-20.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16476
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: ubnt-ledbar: use devm_mutex_init

Allows remove the _remove function as devm calls mutex_destroy
automatically.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16615
Signed-off-by: Robert Marko <robimarko@gmail.com>

generic: platform/mikrotik: add wlan lz77 decompress

A number of new (or with recently updated caldata)
Mikrotik devices are using LZ77 magic for wlan tag hard_config data.
New devices include the Chateau LTE12 [1], and ax devices [2]
Newly factory flashed devices may include the hap ac3 [3]

This can be seen in decoded OEM supout [4] dmesg:
"radio data lz77 decompressed from"…

Investigating an arm RouterOS flash.ko module, and supplied example
hard_config dumps, the format was guessed via decompilation and live
debugging [5]. This decoder was then built from the guessed format
specification.

debug prints can be enabled in a DYNAMIC_DEBUG kernel build via the
kernel cmdline:

        chosen {
-               bootargs = "console=ttyS0,115200";
+               bootargs = "console=ttyS0,115200 dyndbg=\"file drivers/platform/mikrotik/* +p\"";
        };

[1]: https://forum.openwrt.org/t/no-wireless-mikrotik-rbd53ig-5hacd2hnd/157763/4
[2]: https://forum.openwrt.org/t/mikrotik-routeros-v7-x-and-openwrt-sysupgrade/148072/17
[3]: https://forum.openwrt.org/t/adding-support-for-mikrotik-hap-ax2/133715/47
[4]: https://github.com/farseeker/go-mikrotik-rif
[5]: https://github.com/john-tho/routeros-wlan-lz77-decode

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Link: https://github.com/openwrt/openwrt/pull/15774
Signed-off-by: Robert Marko <robimarko@gmail.com>

linux-firmware: Update Intel AX101/AX210 firmware

Use most recent version of the Intel AX101 and AX210 firmware provided
by linux-firmware and supported the driver used in OpenWrt.

Link: https://github.com/openwrt/openwrt/pull/16621
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: ar7200 usb phy: simplify probe

Even though optional is used, there's are still pointless NULL
assignments.

Use dev_err_probe to avoid manually handling EPROBE_DEFER.

Use devm_platform_iomap_resource. No struct resource needed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Shiji Yang <yangshiji66@qq.com> on NETGEAR R6100.
Link: https://github.com/openwrt/openwrt/pull/16519
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ipq40xx: fix MAC address on Meraki MR33 and MR74 after nvmem-layout

...conversion.
Commit 20736013e910 ("kernel: backport nvmem v6.6 fixes and v6.7 changes")
has causedt he device to no longer correctly read MAC address from its
onboard 24c64 EEPROM, because "at24" driver doesn't support legacy
nvmem-cell bindings [1] - and there was an explicit config option added
to mandate that behaviour in the following patch:

820-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch

But some of the devices, MR33 and MR74 included, weren't converted with
that as well.
Convert the definition to use proper fixed-layout binding to fix it.

The offending change was introduced between v23.05.0 and v23.05.1, and
found by bisection:
git bisect start
# status: waiting for both good and bad commits
# good: [bd4f415efacfc03bbe5b79ae1d39c1451f5f7385] OpenWrt v23.05.0: adjust config defaults
git bisect good bd4f415efacfc03bbe5b79ae1d39c1451f5f7385
# status: waiting for bad commit, 1 good commit known
# bad: [a58a86693f8593974ff7c26bb42e280b62a8724c] OpenWrt v23.05.1: adjust config defaults
git bisect bad a58a86693f8593974ff7c26bb42e280b62a8724c
# good: [3d0a78add22754aa891529b6702b5e4c7b837446] qualcommax: only build initramfs if CONFIG_TARGET_ROOTFS_INITRAMFS is set
git bisect good 3d0a78add22754aa891529b6702b5e4c7b837446
# bad: [21e5db97c410f4008c8fe8515fb79a7cde368dbf] build: add CycloneDX SBOM JSON support
git bisect bad 21e5db97c410f4008c8fe8515fb79a7cde368dbf
# good: [89184b15cfce4aaffac8cda87c2fa74f829ace42] mediatek: add build for MT7981 RFB
git bisect good 89184b15cfce4aaffac8cda87c2fa74f829ace42
# bad: [41f27bbb6d0af2f37098b97cd28d5f514a6fc417] bcm53xx: add the latest fix version of brcm_nvram
git bisect bad 41f27bbb6d0af2f37098b97cd28d5f514a6fc417
# good: [b649b0bf7100bdc6adb7e857c74738cab7c47b4c] kernel: nvmem: fix "fixed-layout" & support "mac-base"
git bisect good b649b0bf7100bdc6adb7e857c74738cab7c47b4c
# bad: [20736013e91030005353b401bc4b757ba5e5fa98] kernel: backport nvmem v6.6 fixes and v6.7 changes
git bisect bad 20736013e91030005353b401bc4b757ba5e5fa98
# good: [066971615ff66512bc542b09a90be34c2afe98bb] kernel: backport v6.6 nvmem changes
git bisect good 066971615ff66512bc542b09a90be34c2afe98bb
# first bad commit: [20736013e91030005353b401bc4b757ba5e5fa98] kernel: backport nvmem v6.6 fixes and v6.7 changes

Link: [1] https://github.com/openwrt/openwrt/issues/15393#issuecomment-2212300849
Fixes: 20736013e910 ("kernel: backport nvmem v6.6 fixes and v6.7 changes")
Fixes: https://github.com/openwrt/openwrt/issues/15393
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16623
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath79: gpio-latch-mikrotik: use devm_mutex_init

Avoids needing to call mutex_destroy in error paths, which is missing
anyway.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16620
Signed-off-by: Robert Marko <robimarko@gmail.com>

mac80211: ath12k: allow country set for WCN7850

Update channels when country set.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16613
Signed-off-by: Robert Marko <robimarko@gmail.com>

base-files: don't wipe LED state when adding a single LED

Only replace LED state of a single LED instead of removing the entire
/var/run/led.state file.

Fixes: 511e8f84d0 ("base-files: configure LED when added")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

tools: libdeflate: bump to 1.22

Bump to the latest 1.22 version which allows dropping our only patch.

Changelog:
Version 1.22
* The CMake-based build system now implements a workaround for gcc being paired
  with a too-old binutils version.  This can prevent build errors.

Version 1.21
* Fixed build error on x86 with gcc 8.1 and gcc 8.2.

* Fixed build error on x86 when gcc 11 is paired with a binutils version that
  doesn't support AVX-VNNI, e.g. as it is on RHEL 9.

* Fixed build error on arm64 with gcc 6.

* Fixed build error on arm64 with gcc 13.1 and later with some -mcpu options.

* Enabled detection of dotprod support in Windows ARM64 builds.

Link: https://github.com/openwrt/openwrt/pull/16617
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath10k-ct: select mac80211 debugfs support

Trying to compile ath10k-ct without mac80211 debugfs support will result in:
openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/linux-ipq806x_generic/ath10k-ct-regular/ath10k-ct-2024.07.30~ac71b14d/ath10k-6.10/wmi.h:8083:2: error: #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware. [-Werror=cpp]
 8083 | #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware.
      |  ^~~~~~~
cc1: all warnings being treated as errors

So, since the driver itself is saying that debugfs is required, then
lets make ath10k-ct select mac80211 debugfs support which is selected
by default anyway.

Fixes: #16302
Link: https://github.com/openwrt/openwrt/pull/16619
Signed-off-by: Robert Marko <robimarko@gmail.com>

cmake.mk: disable shared libs for host packages

Disable for host to avoid having to use rpath hacks.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16586
Signed-off-by: Robert Marko <robimarko@gmail.com>

mediatek: fix wrong compatible string

The u-boot,env driver does not have layout in compatible.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16616
Signed-off-by: Robert Marko <robimarko@gmail.com>

linux-firmware: intel: update BE200 wifi firmware

Kick to version 92 - that already support station
MLO correctly.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16558
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

hostapd: reload bss if a relevant ifindex changes

This can happen if the bridge or a stacked vlan device gets recreated.
Ensure that hostapd sees the change and handles it gracefully.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ramips: ER605v2 fix LED function definition

commit 665c2154ef122d10dfffeca95538ebdff82653b5
added support for ER605v2

All three LEDs where configured with LED_FUNCTION_STATUS
which worked for 23.05 and kernel 5.15.

With the upgrade to kernel 6.6 this leads to a name collision.

Therefore the USB and Power LED now use the common.h function
LED_FUNCTION_USB and LED_FUNCTION_POWER respectivly.

* fixes https://github.com/openwrt/openwrt/issues/16596

Link: https://github.com/openwrt/openwrt/pull/16606
Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16606
Signed-off-by: Robert Marko <robimarko@gmail.com>

ramips: use OKLI loader for TP-Link RE200 v1 and RE210 v1

Using OKLI image to fix the booting stuck issue.

Tested with u-boot extracted from TP-Link stock images
"RE200(EU)_V1_171206.zip" and "RE210(US_CA)_V1_171205.zip".

Fixes: https://github.com/openwrt/openwrt/issues/16296
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16473
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ramips: introduce TP-Link v1 header OKLI image recipe

It can be used to workaround the booting stuck issue caused by the
u-boot LZMA decompression error.

The new kernel image structure:
+------+------------------+------------------+---------------+-----------------+
| name | tplink-v1 header | OKLI lzma-loader | uImage header | lzma kernel+dtb |
+------+------------------+------------------+---------------+-----------------+
| size |      0x200       |       0xe00      |     0x40      |     dynamic     |
+------+------------------+------------------+---------------+-----------------+

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16473
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath10k-ct: switch to version 6.10

The mac80211 driver backport has been updated to version 6.11. Let's
also push ath10k-ct driver forward. The unsupported feature
'NL80211_EXT_FEATURE_ETHTOOL_VDEV_STATS' has been dropped since it
looks like something for debugging and not supported by the mainline.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16514
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel-build.mk: Fix multi-core build warning.

In the case of multi-core compilation, the warning prompts to add a "+" sign.
````
warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
`````
Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16598
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: ws2812b: use devm for mutex_init

Allows removal of _remove function.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: leds-ws2812b: remove sub 6.6 support

5.15 and 6.1 are gone.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: leds-ws2812b: use devm functions

Avoids having to free manually.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>

gemini: apm821xx: Ignore return value of e2fsck

This fixes the build of the gemini and the apm821xx target.
The e2fsck application returns an error code now and that makes the
build fail. The tune2fs command adds an extra option and the e2fsck
should later fix the file system. It is intentionally broken in this
place.

e2fsprogs was patched before to ignore this error.

Fixes: 95e4664b5efc ("tools: e2fsprogs: drop e2fsck patch")
Link: https://github.com/openwrt/openwrt/pull/16607
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gemini: Use absolute paths for tools

Use the absolute path to access the e2fsprogs applications. It is also
working with relative paths, but this makes sure that we use our
versions.

Link: https://github.com/openwrt/openwrt/pull/16607
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

iproute2: fix tc-tiny build failure

htobe64 usage requires including endian.h, otherwise tc-tiny fails to build.

Fixes: 626236638197 ("iproute2: update to 6.11.0")
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16609
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

rockchip: config-6.6: remove CONFIG_FORTIFY_SOURCE

The symbol CONFIG_FORTIFY_SOURCE is enable in the generic CONFIG
so remove it from the rockchip CONFIG as is conflicts with the default 'y'
Fixes: https://github.com/openwrt/openwrt/issues/16600
Signed-off-by: Leo Barsky <leobrsky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16603
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.6 to 6.6.54

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.54

Removed upstreamed:
generic/backport-6.6/780-24-v6.12-r8169-disable-ALDPS-per-default-for-RTL8125.patch[1]
generic/pending-6.6/360-selftests-bpf-portability-of-unprivileged-tests.patch[2]

Manually rebased:
bcm53xx/patches-6.6/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
bmips/patches-6.6/200-mips-bmips-automatically-detect-CPU-frequency.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.54&id=50d062b6cc90c45a0de54e9bd9903c82777d66bf
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.54&id=103c0431c7fb4790affea121126840dbfb146341

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16602
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

tools: mtd-utils: update to 2.2.1

Release notes:
https://lists.infradead.org/pipermail/linux-mtd/2024-September/106193.html

The rbtree implementation was moved, adapted the patches manually.

Link: https://github.com/openwrt/openwrt/pull/16594
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

utils: mtd-utils: update to 2.2.1

Release notes:
https://lists.infradead.org/pipermail/linux-mtd/2024-September/106193.html

Small size increase:
61380 bin/targets/ath79-old/nand/packages/nand-utils_2.2.0-r1_mips_24kc.ipk
92913 bin/targets/ath79-old/nand/packages/ubi-utils_2.2.0-r1_mips_24kc.ipk
61413 bin/targets/ath79-new/nand/packages/nand-utils_2.2.1-r1_mips_24kc.ipk
92640 bin/targets/ath79-new/nand/packages/ubi-utils_2.2.1-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16594
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

iproute2: update to 6.11.0

Release Notes:
https://lore.kernel.org/netdev/20240717090601.20b2871f@hermes.local/T/
https://lwn.net/Articles/990423/

Remove patch `401-bridge-vlan.c-bridge-vlan.c-fix-build-with-gcc-14-on.patch`
because it is upstream now.

Backport two patches to fix build problems in bridge/mst.c

Small size increase:
 38538 bin/packages/mips_24kc-old/base/devlink_6.9.0-r1_mips_24kc.ipk
  7713 bin/packages/mips_24kc-old/base/genl_6.9.0-r1_mips_24kc.ipk
 31875 bin/packages/mips_24kc-old/base/ip-bridge_6.9.0-r1_mips_24kc.ipk
187733 bin/packages/mips_24kc-old/base/ip-full_6.9.0-r1_mips_24kc.ipk
126538 bin/packages/mips_24kc-old/base/ip-tiny_6.9.0-r1_mips_24kc.ipk
  7619 bin/packages/mips_24kc-old/base/nstat_6.9.0-r1_mips_24kc.ipk
 20704 bin/packages/mips_24kc-old/base/rdma_6.9.0-r1_mips_24kc.ipk
 37607 bin/packages/mips_24kc-old/base/ss_6.9.0-r1_mips_24kc.ipk
158909 bin/packages/mips_24kc-old/base/tc-bpf_6.9.0-r1_mips_24kc.ipk
160459 bin/packages/mips_24kc-old/base/tc-full_6.9.0-r1_mips_24kc.ipk
135846 bin/packages/mips_24kc-old/base/tc-tiny_6.9.0-r1_mips_24kc.ipk
 38669 bin/packages/mips_24kc-new/base/devlink_6.11.0-r1_mips_24kc.ipk
  7719 bin/packages/mips_24kc-new/base/genl_6.11.0-r1_mips_24kc.ipk
 32676 bin/packages/mips_24kc-new/base/ip-bridge_6.11.0-r1_mips_24kc.ipk
188920 bin/packages/mips_24kc-new/base/ip-full_6.11.0-r1_mips_24kc.ipk
127313 bin/packages/mips_24kc-new/base/ip-tiny_6.11.0-r1_mips_24kc.ipk
  7612 bin/packages/mips_24kc-new/base/nstat_6.11.0-r1_mips_24kc.ipk
 21065 bin/packages/mips_24kc-new/base/rdma_6.11.0-r1_mips_24kc.ipk
 37726 bin/packages/mips_24kc-new/base/ss_6.11.0-r1_mips_24kc.ipk
158921 bin/packages/mips_24kc-new/base/tc-bpf_6.11.0-r1_mips_24kc.ipk
160510 bin/packages/mips_24kc-new/base/tc-full_6.11.0-r1_mips_24kc.ipk
136352 bin/packages/mips_24kc-new/base/tc-tiny_6.11.0-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16589
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ethtool: update to 6.10

Release Notes:
https://lore.kernel.org/netdev/20240128235634.4ni2lbvzqjlwbgi4@lion.mk-sys.cz/T/
https://lore.kernel.org/netdev/jylgitumxz72a2hfzsujnwvxpkuzcw3wcwebodthtpvtkfgmlp@rfoix5dyh2bg/T/
https://lore.kernel.org/netdev/ssn37ocuhjyx3k5xoq53uvb3voo2qxnwvuwgephb4cc5lbw5ei@5fkqwsfdzlcu/T/

Small size increase:
 34937 bin/packages/mips_24kc-old/base/ethtool_6.6-r1_mips_24kc.ipk
154818 bin/packages/mips_24kc-old/base/ethtool-full_6.6-r1_mips_24kc.ipk
 35780 bin/packages/mips_24kc-new/base/ethtool_6.10-r1_mips_24kc.ipk
157386 bin/packages/mips_24kc-new/base/ethtool-full_6.10-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16590
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

libnl: update to 3.10.0

Changes:
fa05d58e (tag: libnl3_10_0) libnl-3.10.0 release
490ffa07 python: fix flake8 warnings
6fc66dd8 doc: workaround LINK_DOC with empty libnl.dict
914812a9 lib: avoid overflow in computation of s_seq_next
5248e1a4 all: fix and enable "-Wsign-compare" warning
9451842e build: use AC_USE_SYSTEM_EXTENSIONS instead of defining _GNU_SOURCE
20664e1e build: move "-DPGKLIBDIR" and rename
81cab7da build: cleanup defining SYSCONFDIR on command line
cf47571c build: drop unnecessary "-Wno-missing-field-initializers" from default CFLAGS
131008f7 build: add "-Wvla" and "-Wdeclaration-after-statement" to default CFLAGS
7e05b622 lib: add internal _nla_len() helper
32688201 route: treat routes with via nexthops as universe scoped as well
c36c7faa format: reformat "include/base/nl-base-utils.h"
49f78229 tests: add a very basic test for route cache
2ebbc034 tests: add NLTstSelectRoute test helper
d784f2cb tests: set NLTST_IN_CI for not skipping tests accidentally
dcb9e2ef route: add missing priority to route_keygen() debug print
d44505ed tests: add helper to detect availablility of iproute2
774863b4 tests: add helper functions for tests
45a10f96 route: move "struct rtnl_nexthop" to "nl-priv-dynamic-route"
153f213b build: fix "check-progs" target in "Makefile.am"
a1e0b8b2 github: print test-suite.log in case of test failure
3e080631 route: expose nexthop id attribute
401c2488 tests: fix _nltst_object_to_string() to print one line only
529c2ab8 route: drop unused fields from "struct rtnl_route"
71e59e14 build: separate build tests from unit tests
8539b7d3 format: reformat "tests/nl-test-util.h" file
6db85366 route: merge branch 'bisdn:jogo_route_nh_cmp'
861fb809 route: use the new helper function for comparing nexthops
8cf29d7b nexthop: add a identical helper function
7cc72d19 utils: reserve the nl_has_capabiliy numbers for releases 3.10 - 3.12
30da5107 github,clang-format: update fedora version for clang-format
2301992b route: fix IPv6 ecmp route deleted nexthop matching
72e4d73f cache: merge branch 'ievenbach:aurora/cache-mgr-cb'
3381acef cache: use cleanup attribute in nl_cache_mngr_alloc_ex()
32cb9f39 cache: cleanup nl_cache_mngr_alloc_ex()
1dbdc30a cache: allow to allocate cache manager with custom refill socket
18b74e08 tests: test compiling all public headers with C++ compiler
691202bf tests: don't use $COMPILE for building header tests
15d90cbf include: add _NL_NO_WARN_DEPRECATED_HEADER for suppressing warning about deprecated headers
8a5f671a tests: avoid "-Wunused-parameter" warning in build headers test
db1a9d7d route: avoid compiler warning about calloc() arguments in rtnl_netem_set_delay_distribution()
3a43faa1 cache: fix new object in callback v2 on updated objects
46cae1bf socket: fix ubsan complaint about incorrect left-shift in generate_local_port()
96ddcd99 all: merge branch 'th/nl-debug'
13ab0122 github: test with --enable-debug=no configure option
264b244e utils: always define nl_debug_dp
dbe21b8d core: always define statements for NL_DBG()
e592dd89 build: always define NL_DEBUG
58734974 all: use defines for attributes
0c16c9cb route/bison: include "nl-default.h" in lex/yacc files
19d48b0f route: add support for layer 3 filtering on bridges
3646398d route: merge branch 'Cordell-O:main'
e21278ed tests: add test for bridge vlan attributes.
4f324f73 route: add support for vlan filtering on bridge ports.
bf071f2b route: Add support to set ageing time for dynamic bridge table entries
b76c3a5d tests: add unit test for `nl_addr_parse("default", AF_INET6, &addr6)`
8693347f lib/xfrm: add missing #include <time.h>

Small size increase:
   955 bin/packages/mips_24kc-old/base/libnl200_3.9.0-r1_mips_24kc.ipk
 11157 bin/packages/mips_24kc-old/base/libnl-cli200_3.9.0-r1_mips_24kc.ipk
 34896 bin/packages/mips_24kc-old/base/libnl-core200_3.9.0-r1_mips_24kc.ipk
  7698 bin/packages/mips_24kc-old/base/libnl-genl200_3.9.0-r1_mips_24kc.ipk
 25400 bin/packages/mips_24kc-old/base/libnl-nf200_3.9.0-r1_mips_24kc.ipk
148366 bin/packages/mips_24kc-old/base/libnl-route200_3.9.0-r1_mips_24kc.ipk
   956 bin/packages/mips_24kc-new/base/libnl200_3.10.0-r1_mips_24kc.ipk
 11154 bin/packages/mips_24kc-new/base/libnl-cli200_3.10.0-r1_mips_24kc.ipk
 34965 bin/packages/mips_24kc-new/base/libnl-core200_3.10.0-r1_mips_24kc.ipk
  7699 bin/packages/mips_24kc-new/base/libnl-genl200_3.10.0-r1_mips_24kc.ipk
 25385 bin/packages/mips_24kc-new/base/libnl-nf200_3.10.0-r1_mips_24kc.ipk
149852 bin/packages/mips_24kc-new/base/libnl-route200_3.10.0-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16592
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

libxml2: update to 2.13.4

Release Notes:
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.0
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.1
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.2
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.3
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.4

Small size reduction:
415095 bin/packages/mips_24kc-old/base/libxml2_2.12.6-r1_mips_24kc.ipk
 87175 bin/packages/mips_24kc-old/base/libxml2-dev_2.12.6-r1_mips_24kc.ipk
 20190 bin/packages/mips_24kc-old/base/libxml2-utils_2.12.6-r1_mips_24kc.ipk
398070 bin/packages/mips_24kc-new/base/libxml2_2.13.4-r1_mips_24kc.ipk
 86760 bin/packages/mips_24kc-new/base/libxml2-dev_2.13.4-r1_mips_24kc.ipk
 19479 bin/packages/mips_24kc-new/base/libxml2-utils_2.13.4-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16593
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

libxml2: update to 2.12.9

Release Notes:
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.7
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.8
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.9

This fixes:
CVE-2024-34459: Fix buffer overread with xmllint --htmlout
CVE-2024-40896: Fix XXE protection in downstream code

Link: https://github.com/openwrt/openwrt/pull/16593
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

libjson-c: update to 0.18

Release Notes:
https://github.com/json-c/json-c/blob/json-c-0.18-20240915/ChangeLog

This restores ABI compatibility with version 0.16 used in OpenWrt 23.05.

Small size increase:
24263 bin/packages/mips_24kc-old/base/libjson-c5_0.17-r1_mips_24kc.ipk
24403 bin/packages/mips_24kc-new/base/libjson-c5_0.18-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16591
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

strace: Update to version 6.11

Release Notes:
https://github.com/strace/strace/releases/tag/v6.8
https://github.com/strace/strace/releases/tag/v6.9
https://github.com/strace/strace/releases/tag/v6.10
https://github.com/strace/strace/releases/tag/v6.11

Small size increase:
323788 bin/packages/mips_24kc-old/base/strace_6.7-r1_mips_24kc.ipk
336988 bin/packages/mips_24kc-new/base/strace_6.11-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16585
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

valgrind: Update to version 3.23

Release notes:
https://valgrind.org/docs/manual/dist.news.html

The patch `130-fix_arm_arch_detection.patch` was added upstream in
https://sourceware.org/git/?p=valgrind.git;a=commitdiff;h=5bdb86cc9a962f04f2dd3816b7d3a96288b09b72

Replace `010-mips-Fix-new-syscall-numbers.patch` with backport from
upstream.

Backport patch `020-no-member-guest_IP_AT_SYSCALL.patch` to fix a
compile problem on MIPS.

Small size increase:
1527884 bin/packages/mips_24kc-old/base/valgrind_3.22.0-r1_mips_24kc.ipk
3352210 bin/packages/mips_24kc-old/base/valgrind-cachegrind_3.22.0-r1_mips_24kc.ipk
3522982 bin/packages/mips_24kc-old/base/valgrind-callgrind_3.22.0-r1_mips_24kc.ipk
3573577 bin/packages/mips_24kc-old/base/valgrind-drd_3.22.0-r1_mips_24kc.ipk
3647835 bin/packages/mips_24kc-old/base/valgrind-helgrind_3.22.0-r1_mips_24kc.ipk
3383239 bin/packages/mips_24kc-old/base/valgrind-massif_3.22.0-r1_mips_24kc.ipk
  22332 bin/packages/mips_24kc-old/base/valgrind-vgdb_3.22.0-r1_mips_24kc.ipk
1541969 bin/packages/mips_24kc-new/base/valgrind_3.23.0-r1_mips_24kc.ipk
3378595 bin/packages/mips_24kc-new/base/valgrind-cachegrind_3.23.0-r1_mips_24kc.ipk
3548415 bin/packages/mips_24kc-new/base/valgrind-callgrind_3.23.0-r1_mips_24kc.ipk
3592715 bin/packages/mips_24kc-new/base/valgrind-drd_3.23.0-r1_mips_24kc.ipk
3664706 bin/packages/mips_24kc-new/base/valgrind-helgrind_3.23.0-r1_mips_24kc.ipk
3411485 bin/packages/mips_24kc-new/base/valgrind-massif_3.23.0-r1_mips_24kc.ipk
  22869 bin/packages/mips_24kc-new/base/valgrind-vgdb_3.23.0-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16584
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mac80211: backport upstream DFS fixes

Mostly MLO related

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ramips: dts: DNA EX400 has redundant type u-boot environment

Set compatible string and specify redundant type U-boot environment.

Fixes: fea2264d9fdd ("ramips: mt7621: Add DNA Valokuitu Plus EX400")
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/openwrt/openwrt/pull/16573
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mt7621: enable CONFIG_MTD_UBI_NVMEM, CONFIG_NVMEM_LAYOUT_U_BOOT_ENV

Enable above drivers for mt7621 targets. They are needed for retrieving a MAC
address stored in a U-boot environment residing on an UBI volume.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/openwrt/openwrt/pull/16573
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mac80211: update to version 6.11.2

Adds a number of minor fixes

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add missing eeprom file for mt7992

Signed-off-by: Felix Fietkau <nbd@nbd.name>

base-files: configure LED when added

Currently LED configuration is only carried out once during boot.
Apply LED configuration also with a hotplug call when a new LED gets
added later.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

base-files: /etc/sysctl.conf: clarity in comment

Make it clear to users that they should not place a custom file
in /etc/sysctl.d/ for their values and expect it to survive a
reimage.

This change is needed since these directories (/etc/foo.d/) are
generally where such files are placed on other distros.

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16543
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

audit: update to 3.1.5

- Remove upstreamed patch: 0001-Implicit-builtin-functions.patch
- Fix package license info.
- Use git mirror instead of GitHub generated tarball.

Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/16388
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

meta: VS Code: add "Git: Always Sign Off" setting

VS Code setting to auto signoff commits.
This also corresponds to our GitHub Web workflow.

Signed-off-by: Andrey Butirsky <butirsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16540
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: rb91x-key: replace fwnode with pdev

There's no specific fwnode handling here. Simpler to just use pdev.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16506
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: rb91x-key: use more devm

Use devm_gpiochip_add_data to get rid of the remove function. No need
for it.

Also use dev_err_probe to simplify the error path and avoid having to
handle -EPROBE_DEFER manually.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16506
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

x86: generic: config-6.6: refresh config

Add CONFIG_ARCH_CONFIGURES_CPU_MITIGATIONS=y which was introduced
back in April of this year[1]

1. https://github.com/torvalds/linux/commit/ce0abef6a1d540acef85068e0e82bdf1fbeeb0e9

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16535
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ramips: modernize ralink i2c driver

Use more devm and remove _remove function.

Remove owner as the kernel sets it automatically.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16546
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: ubnt-ledbar: return directly

Removes ret variable.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16508
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: ubnt-ledbar: use dev_err_probe

Handles EPROBE_DEFER and simplifies the code.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16508
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ramips: rename interfaces for tplink er605v2

Currently eth1 (which is the first "lan" interface) doesn't work on this device.
During boot the following can be seen in logs:

```
[    2.252804] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.266060] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 19
[    2.277889] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 19
...
[    2.355157] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.390312] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
[    2.398597] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
[    2.403872] mt7530-mdio mdio-bus:1f eth1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=21)
[    2.416988] mtk_soc_eth 1e100000.ethernet eth0: error -17 registering interface eth1
[    2.426973] mt7530-mdio mdio-bus:1f eth2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=22)
[    2.440996] mt7530-mdio mdio-bus:1f eth3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=23)
[    2.454405] mt7530-mdio mdio-bus:1f eth4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=24)
[    2.467198] mtk_soc_eth 1e100000.ethernet eth0: entered promiscuous mode
[    2.474117] DSA: tree 0 setup
...
[    6.820998] mtk_soc_eth 1e100000.ethernet dsa: renamed from eth0
[    6.919904] mtk_soc_eth 1e100000.ethernet wan: renamed from eth1
```

So the problem seems to be the fact that built-in gmacs get default
names (eth0/eth1) and are renamed after switch ports are initialized. This means
that when switch port with name `eth1` is brought up this name is still used by
gmac1 causing switch port's init to fail.

This patch just renames the ports to avoid name collision.
Note: this will break existing configs for this device because it renames all
the ports. This should not be major problem because this device doesn't have a
proper OEM image and is only flashable with serial access, meaning there should
not be many users.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15865
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

wifi-scripts: Fix typo in EHT320 name

All other places name it EHT320.

Fixes: b478b7b1f7b9 ("wifi-scripts: detect and configure EHT")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: packages: kmod-pstore: remove deprecated Kconfig options

The following options no longer exist in 6.6:

PSTORE_COMPRESS_DEFAULT
PSTORE_DEFLATE_COMPRESS
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/pstore/Kconfig?h=v6.6

Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/16579
Signed-off-by: Robert Marko <robimarko@gmail.com>

mt76: mark mt7925 11BE capable

Build hostapd with 11BE support for
both mt7925e and mt7925u.

Signed-off-by: Marek Puzyniak <marek.puzyniak@holisticon.pl>
Link: https://github.com/openwrt/openwrt/pull/16571
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mac80211: mark ath12k 80211BE capable

Build hostapd with 80211BE suport.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16571
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

generic: backport upstream r8169 patches

These patches have been added in linux v6.12 release.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

realtek: add support for Linksys LGS310C

Hardware specification
----------------------

* RTL8380M SoC, 1 MIPS 4KEc core @ 500MHz
* 256MB DRAM
* 32MB NOR Flash
* 8 x 10/100/1000BASE-T ports
* 2 x SFP ports
* Power LED, Fault LED
* Reset button on front panel
* UART (115200 8N1) via populated standard pin header marked JP1

TODO: The SFP ports use a shared SCL GPIO that the driver cannot handle.
The left SFP port (lan9) is defined and fully functional while the laser
on the right SFP port (lan10) is off by default.

UART pinout
-----------

[o]ooo|JP1
 | ||`------ GND
 | |`------- RX
 | `-------- TX
 `---------- Vcc (3V3)

Installation using OEM webinterface
-----------------------------------

1. Make sure you are running OEM firmware in secondary slot
2. Install squashfs-factory.imag to primary slot by upload via http

Installation using serial interface
-----------------------------------

1. Press "a" "c" "p" during message "Enter correct key to stop autoboot"
2. Load image with "upgrade runtime <TFTP IP>:squashfs-sysupgrade.bin" command
3. Switch to primary slot with "setsys bootpartition 0"
4. Store config with "savesys"
5. Boot the image with `boota` command

Dual-boot with stock firmware using writable u-boot-env
-------------------------------------------------------

From stock to OpenWrt / primary image 1 (CLI as admin):
   - > boot system image1
   - > reboot

From OpenWrt to stock / boot image 2: (shell as root)
   - # fw_setsys bootpartition 1
   - # reboot

Debrick using serial interface
------------------------------

1. Press "a" "c" "p" during message "Enter correct key to stop autoboot"
2. Load vendor image with "upgrade runtime <TFTP IP>:LGS310xxxxx.imag"
3. switch to primary partition "setsys bootpartition 0"
4. safe config "savesys"

Further documentation
---------------------
See https://openwrt.org/toh/linksys/lgs352c

It has been developed and tested on device with v1 revision.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/16068
[Add missing 'w' in name of firmware partition]
Signed-off-by: Sander Vanheule <sander@svanheule.net>

wifi-scripts: add better defaults for 6 GHz interop

Indicate stationary AP and set default 6G regulatory power type to indoor

Signed-off-by: Felix Fietkau <nbd@nbd.name>

base-files: set root password if present inside board.json

Add code to set plain password or put the hash into /etc/shadow.

Signed-off-by: John Crispin <john@phrozen.org>

base-files: add timezone to UCI during config_generate

Signed-off-by: John Crispin <john@phrozen.org>

dropbear: add a uci-defaults script for loading authorized keys

Write the ssh authorized key to /etc/dropbear/ssh_authorized_keys if present
inside boad.json.

Signed-off-by: John Crispin <john@phrozen.org>

wifi-scripts: populate default wifi credentials and country code from board.json

Signed-off-by: John Crispin <john@phrozen.org>

uboot-envtools: add a board.d script to load defaults from the environment

This allows loading default wifi credentials, passwords and ssh keys on
firstboot.

Signed-off-by: John Crispin <john@phrozen.org>

uboot-envtools: add fw_loadenv tool

This tool will load the uboot environment to /var/run/uboot-env/. This allows
more efficient use when accessing multiple variables.

Signed-off-by: John Crispin <john@phrozen.org>

base-files: execute uboot-env script before calling config_generate

This allows /etc/board.d/* scripts to use values from the uboot environment.

Signed-off-by: John Crispin <john@phrozen.org>

base-files: uci-defaults: allow setting the number of MACs a radio can use

Introduce new uci-default functions:
- ucidef_set_wireless_mac_count [count]

Signed-off-by: John Crispin <john@phrozen.org>

base-files: uci-defaults: allow setting default timezone

Introduce new uci-default functions:
- ucidef_set_timezone TZ

Signed-off-by: John Crispin <john@phrozen.org>

base-files: uci-defaults: allow setting default credentials and ssh keys

Introduce new uci-default functions:
     - ucidef_set_root_password_hash [hash]
     - ucidef_set_root_password_plain [plaintext]
     - ucidef_set_ssh_authorized_key [ssh key]

Signed-off-by: John Crispin <john@phrozen.org>

base-files: uci-defaults: allow setting wireless defaults

Introduce new uci-default functions:
 - ucidef_set_wireless band ssid [encryption] [key]
 - ucidef_set_country cc

They are supposed to be used in /etc/board.d/* scripts to define
board-specific defaults for wireless.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: John Crispin <john@phrozen.org>

hostapd: send a notification via ubus when CSA completed

Signed-off-by: John Crispin <john@phrozen.org>

hostapd: add ifname to generic ubus notify code

Signed-off-by: John Crispin <john@phrozen.org>

hostapd: add ifname and vlan_id to sta-authorized notifications

Signed-off-by: John Crispin <john@phrozen.org>

hostapd: add the ifname to ubus events

Signed-off-by: John Crispin <john@phrozen.org>

umdns: update to latest HEAD

fbaca4b cache: improve update call by doing a full refresh probe
93c9036 dns: reply to A/AAAA questions for additional hostnames

Signed-off-by: John Crispin <john@phrozen.org>

wifi-scripts: detect and configure EHT

Check if EHT/11BE supported, configure in board.json
and config/wireless.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

mt76: mark mt7996e 11BE capable

Build hostapd with 11BE support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

wifi-scripts: mac80211.sh: enable EHT320

For EHT320 we should also enable HE160.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

wifi-scripts: mac80211.sh: allow EHT* sets

Allow to configure 80211BE.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

hostapd: fix build when 80211BE enabled

In file included from hostapd-wpad-basic-mbedtls/hostapd-2024.03.09~695277a5/src/ap/ubus.h:11,
                 from hostapd-wpad-basic-mbedtls/hostapd-2024.03.09~695277a5/src/ap/hostapd.h:21,
                 from main.c:26:
hostapd-2024.03.09~695277a5/src/ap/sta_info.h: In function 'ap_sta_is_mld':
hostapd-2024.03.09~695277a5/src/ap/sta_info.h:425:20: error: invalid use of undefined type 'struct hostapd_data'
  425 |         return hapd->conf->mld_ap && sta && sta->mld_info.mld_sta;
      |                    ^~

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

hostapd: add CONFIG_DRIVER_11BE_SUPPORT

Add option to enable 802.11BE support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

ucode: update to latest HEAD

b610860 Merge pull request #223 from jow-/nl80211-add-eht-attributes
4e0456b nl80211: add EHT mac/phy capabilities
c938ee9 Merge pull request #218 from jonasjelonek/add-ioctl
56ebeec fs: add ioctl() file method
d0f423b Merge pull request #221 from mikma/fix-getenv
86f1121 lib: test if call to getenv() destroys environ
7af80d9 lib: use copy of environ pointer in getenv()
6ea37c8 ci: bump upload-artifact to v3
26d7292 Merge pull request #214 from jow-/ucode-test-runner
fbabec4 tests: replace test runner shell script with ucode implementation
e391ef5 main: prevent invalid memory access when executing empty stdin
b391fd7 Merge pull request #211 from jow-/hwsim-support
bc13278 nl80211: support the MAC80211_HWSIM netlink protocol family
f5b5a58 nl80211: drop unused structure members from connection context
f6ea6fc nl80211: support conversion from/to struct array attributes
115a84f nl80211: gracefully handle illegal netlink error code

Signed-off-by: John Crispin <john@phrozen.org>