Felix Fietkau [Wed, 16 Sep 2015 07:56:47 +0000 (07:56 +0000)]
mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46949
Felix Fietkau [Wed, 16 Sep 2015 07:56:41 +0000 (07:56 +0000)]
ath9k: enable hw manual peak calibration for QCA9561
This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
2015-August/034979.html. As the peak detect calibration is set
incorrectly.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46948
Felix Fietkau [Wed, 16 Sep 2015 07:56:33 +0000 (07:56 +0000)]
omap24xx: remove obsolete kernel 3.3 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46947
Hauke Mehrtens [Tue, 15 Sep 2015 21:58:48 +0000 (21:58 +0000)]
binutils: fix name of Binutils 2.25.1
The Binutils version 2.25.1 was not a Linaro version, but a normal
upstream Binutils version, fix the name.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
SVN-Revision: 46946
Rafał Miłecki [Tue, 15 Sep 2015 16:05:10 +0000 (16:05 +0000)]
ipq806x: add platform_pre_upgrade for sysupgrade
We're in process of cleaning nand_do_platform_check. Currently is leaves
a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
path in nand_upgrade_stage1. This can be a bit confusing.
The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.
This follows ar71xx, lantiq and partially bcm53xx.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46945
Rafał Miłecki [Tue, 15 Sep 2015 16:05:03 +0000 (16:05 +0000)]
imx6: add platform_pre_upgrade for sysupgrade
We're in process of cleaning nand_do_platform_check. Currently is leaves
a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
path in nand_upgrade_stage1. This can be a bit confusing.
The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.
This follows ar71xx, lantiq and partially bcm53xx.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46944
Steven Barth [Tue, 15 Sep 2015 14:52:47 +0000 (14:52 +0000)]
ppp: use more reliable way to set script environment
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46942
Rafał Miłecki [Tue, 15 Sep 2015 11:49:33 +0000 (11:49 +0000)]
lantiq: update list on NAND devices in platform_pre_upgrade
Meanwhile BTHOMEHUBV5A board was added.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46941
Steven Barth [Tue, 15 Sep 2015 07:54:55 +0000 (07:54 +0000)]
omcproxy: use 100ms query response interval by default
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46940
John Crispin [Tue, 15 Sep 2015 06:13:07 +0000 (06:13 +0000)]
lantiq: add platform_pre_upgrade for sysupgrade
As explained in recent sysupgrade/nand.sh commits, current NAND
sysupgrade is a bit misleading because of nand_do_platform_check
behavior. It leaves a special mark in /tmp/sysupgrade-nand-path
triggering some diffent code path in nand_upgrade_stage1.
The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.
Please note that because of current nand_upgrade_stage1 implementation
this patch doesn't change any behaior yet. It only prepares lantiq
target for changing nand_do_platform_check (it will be possible after
preparing all other targets as well).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46939
John Crispin [Tue, 15 Sep 2015 06:12:55 +0000 (06:12 +0000)]
procd: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46938
John Crispin [Tue, 15 Sep 2015 06:12:42 +0000 (06:12 +0000)]
libubox: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46937
John Crispin [Tue, 15 Sep 2015 06:12:34 +0000 (06:12 +0000)]
procd: rework makefile, split ujail/seccomp
this need to be applied after my work on ujail (procd git)
ujail doesn't depend on seccomp and some archs dont support seccomp
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 46936
John Crispin [Mon, 14 Sep 2015 20:12:21 +0000 (20:12 +0000)]
mountd: move code to a git repo
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46935
John Crispin [Mon, 14 Sep 2015 20:12:16 +0000 (20:12 +0000)]
ar71xx: add TP-LINK TL-WDR3320 v2 support
This patch adds support for TP-LINK TL-WDR3320 v2.
This router uses a chinese version 2 firmware header,.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 46934
John Crispin [Mon, 14 Sep 2015 20:12:00 +0000 (20:12 +0000)]
ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46933
John Crispin [Mon, 14 Sep 2015 20:11:51 +0000 (20:11 +0000)]
ar71xx: create profile and build image for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46932
John Crispin [Mon, 14 Sep 2015 20:11:43 +0000 (20:11 +0000)]
package/uboot-envtools: add OpenMesh MR1750 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46931
John Crispin [Mon, 14 Sep 2015 20:11:35 +0000 (20:11 +0000)]
package/om-watchdog: add OpenMesh MR1750 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46930
John Crispin [Mon, 14 Sep 2015 20:11:24 +0000 (20:11 +0000)]
ar71xx: enable sysupgrade for the OpenMesh MR1750
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46929
John Crispin [Mon, 14 Sep 2015 20:11:18 +0000 (20:11 +0000)]
scripts/om-fwupgradecfg-gen.sh: add support for the MR1750
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46928
John Crispin [Mon, 14 Sep 2015 20:11:01 +0000 (20:11 +0000)]
ar71xx: add user-space support for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46927
John Crispin [Mon, 14 Sep 2015 20:10:43 +0000 (20:10 +0000)]
ar71xx: add kernel support for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46926
John Crispin [Mon, 14 Sep 2015 20:10:10 +0000 (20:10 +0000)]
scripts/om-fwupgradecfg-gen.sh: Fix u-boot image md5sum check
The u-boot on Open Mesh devices checks the whole transfered image against a
md5sum. This is stored inside the option filemd5sum inside the
fwupgrade.cfg. The bootloader will not check it when this setting is
missing and could therefore write invalid images to the flash.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46925
John Crispin [Mon, 14 Sep 2015 20:10:04 +0000 (20:10 +0000)]
realview: create sd card image for qemu
enables a real rootfs with custom size
use qemu with:
qemu-system-arm -M realview-pbx-a9 \
-kernel openwrt-realview-vmlinux.elf \
-nographic -m 1024M \
-sd openwrt-realview-sdcard.img \
--append "console=ttyAMA0 root=/dev/mmcblk0p1"
modified script from brcm2708 target
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46924
John Crispin [Mon, 14 Sep 2015 20:09:56 +0000 (20:09 +0000)]
realview: enable sd card support
qemu can be run with -sd <imagename>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46923
John Crispin [Mon, 14 Sep 2015 20:09:40 +0000 (20:09 +0000)]
ar71xx: assign proper GPIO pin for Ubiquiti Nanostation models
The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the
following:
* Ubiquiti Nanostation M XM: Pin 8
* Ubiquiti Nanostation M XW: Pin 2
The previous definition of the pins was mixed up between XM and XW model.
Signed-off-by: Lars Kruse <lists@sumpfralle.de>
SVN-Revision: 46922
John Crispin [Mon, 14 Sep 2015 20:09:31 +0000 (20:09 +0000)]
ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350
This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor.
Signed-off-by: Tobias Welz <tw@wiznet.eu>
SVN-Revision: 46921
John Crispin [Mon, 14 Sep 2015 20:09:22 +0000 (20:09 +0000)]
lantiq: Update to the latest DSL driver / application versions
Thanks to Sylwester Petela for testing my patch (successfully on an
ADSL connection) and for pointing out some configuration mistakes.
Others (including me) have also successfully tested this extensively
on VDSL connections.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46920
John Crispin [Mon, 14 Sep 2015 20:09:06 +0000 (20:09 +0000)]
base-files: sysupgrade: quote source image name
get_image() eval a filename without quoting it, resulting in errors with
filenames containing characters that need to be escaped.
$ sysupgrade -T -f ./cfg\(12\).tar.gz img.bin; echo $?
Image check 'platform_check_image' failed.
Invalid config file. Please use only .tar.gz files
1
$ mv cfg\(12\).tar.gz cfg_12.tar.gz
$ mv img\(1\).bin img.bin
sysupgrade -T -f ./cfg_12.tar.gz img.bin; echo $?
0
Enclose the content of $from in double quotes.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
SVN-Revision: 46919
John Crispin [Mon, 14 Sep 2015 20:08:55 +0000 (20:08 +0000)]
ramips: add support for Planex DB-WRT01
This patch add support for Planex DB-WRT01. DANBOARD route on
the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio.
DANBOARD is Cartoon character.
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 46918
John Crispin [Mon, 14 Sep 2015 20:08:39 +0000 (20:08 +0000)]
lantiq: get more status information from xDSL
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Helge Mader <hmader@tdt.de>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
SVN-Revision: 46917
John Crispin [Mon, 14 Sep 2015 20:08:25 +0000 (20:08 +0000)]
kernel: dwc2: Add missing config symbol definition
DWC2 driver has config symbol CONFIG_USB_DWC2_DEBUG_PERIODIC which
should be defined for the module build.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 46916
John Crispin [Mon, 14 Sep 2015 20:08:15 +0000 (20:08 +0000)]
lantiq: Add AR9 compatibility bits to DWC2 driver
Add AR9 DTS definition to be recognized by the DWC2 driver.
The same driver parameters can be mostly used except that some boards
seem to erroneously report OTG HNP/SRP capability of the USB HCD.
Forcing the HNP/SRP off allows these boards to work with the DWC2 as well.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 46915
John Crispin [Mon, 14 Sep 2015 20:08:07 +0000 (20:08 +0000)]
lantiq: Introduce DWC2 compatible DTS definitions for AR9 USB
Since the AR9 USB is very similar to the VR9 USB it too can be used with
the upstream DWC2 driver.
Here are the DTS definitions which make it compatible with the DWC2
driver.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 46914
John Crispin [Mon, 14 Sep 2015 20:07:23 +0000 (20:07 +0000)]
lantiq: Initialize USB on AR9 platform
Based on the ltq-hcd driver the AR9 USB can be initialized the same way
as the VR9 platform. Use the same initialization bits for both
platforms.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 46913
Jo-Philipp Wich [Mon, 14 Sep 2015 16:57:03 +0000 (16:57 +0000)]
imagebuilder: store package lists in cache directory
Force opkg to store the downloaded repository indizes into the cache
directory as well, this way the IB can be used in an offline setting
once all required files have been cached.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46912
Jo-Philipp Wich [Mon, 14 Sep 2015 16:56:40 +0000 (16:56 +0000)]
opkg: expose lists_dir option as command line argument
Expose the "lists_dir" configuration file option as command line
switch so that we can override it for the Image Builder environment.
Also add a more standard PKG_MAINTAINER variable while touching
the Makefile.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46911
Jo-Philipp Wich [Mon, 14 Sep 2015 15:15:15 +0000 (15:15 +0000)]
tools/make-ext4fs: prefer static linking
Link zlib statically on Linux systems.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46909
Jo-Philipp Wich [Mon, 14 Sep 2015 14:51:07 +0000 (14:51 +0000)]
tools/mtd-utils: prefer static linking
- Add patch for optional static linking preference
- Prefer static linking on Linux systems
- Enable verbose compiler messages when building with V=c
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46908
Jo-Philipp Wich [Mon, 14 Sep 2015 14:03:21 +0000 (14:03 +0000)]
tools/xz: disable shared library
Force a static build of the xz utilities in order to avoid the dependency on a
shared liblzma.so which might collide with the distro version.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46907
Rafał Miłecki [Mon, 14 Sep 2015 07:40:40 +0000 (07:40 +0000)]
include: toplevel: drop unused OPENWRTVERSION variable
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46906
Felix Fietkau [Mon, 14 Sep 2015 06:54:15 +0000 (06:54 +0000)]
ramips: fix chunked-io support for big flash chips (#20504)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46904
Felix Fietkau [Mon, 14 Sep 2015 06:51:10 +0000 (06:51 +0000)]
mac80211/hostapd: rework 802.11w driver support selection, do not hardcode drivers in hostapd makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46903
Felix Fietkau [Sun, 13 Sep 2015 20:44:09 +0000 (20:44 +0000)]
ath10k: reduce dma burst size on newer firmware to fix crashes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46900
Steven Barth [Sun, 13 Sep 2015 18:02:54 +0000 (18:02 +0000)]
toplevel: fix release name
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46899
Felix Fietkau [Sun, 13 Sep 2015 17:39:24 +0000 (17:39 +0000)]
Revert "musl: fix termios struct c_ispeed/c_ospeed field names" (accidental commit)
SVN-Revision: 46898
Felix Fietkau [Sun, 13 Sep 2015 17:38:55 +0000 (17:38 +0000)]
gcc: fix path to powerpc musl dynamic linker with 5.2 (#20501)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46897
Felix Fietkau [Sun, 13 Sep 2015 17:38:49 +0000 (17:38 +0000)]
musl: fix termios struct c_ispeed/c_ospeed field names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46896
Felix Fietkau [Sun, 13 Sep 2015 17:38:42 +0000 (17:38 +0000)]
ath10k: make title for the old firmware config option more meaningful
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46895
Zoltan Herpai [Sun, 13 Sep 2015 15:11:27 +0000 (15:11 +0000)]
packages: uboot-sunxi: fix mmc transfer timeout for slow sdcards.
This should fix a issue reported in ticket #20387.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46894
Hauke Mehrtens [Sat, 12 Sep 2015 18:57:37 +0000 (18:57 +0000)]
ar71xx: fix build of lzma-loader with binutils 2.25.1
To make the lzma-loader build with binutils 2.25.1 it is needed to
remove the .MIPS.abiflags section otherwise I get the following compile
error:
mips-openwrt-linux-musl-objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S loader loader.bin
mips-openwrt-linux-musl-objcopy: Warning: Writing section `.text' to huge (ie negative) file offset 0xffffffff80a00000.
mips-openwrt-linux-musl-objcopy:loader.bin[.text]: File truncated
This should close #20487.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46893
Hauke Mehrtens [Sat, 12 Sep 2015 11:10:34 +0000 (11:10 +0000)]
bcm53xx: add NAND flash chip description for Asus RT-AC87U
This should fix #20492.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46892
Felix Fietkau [Sat, 12 Sep 2015 10:22:41 +0000 (10:22 +0000)]
ramips: enable external amplifier for Xiaomi MiWiFi Mini
Attempt to boost the 2.4 GHz signal, currently very low.
Signed-off-by: D. Andrei Măceș <dmaces@nd.edu>
SVN-Revision: 46891
Felix Fietkau [Sat, 12 Sep 2015 08:57:59 +0000 (08:57 +0000)]
base-files: fix typo in core dump pattern sysctl entry (fixes #20489)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46890
Rafał Miłecki [Fri, 11 Sep 2015 22:36:05 +0000 (22:36 +0000)]
bcm53xx: reorder some arch patches
This moves arch patches affecting many DTS files. Thanks to this change
we can put some ready-to-mainline patches at 300-319 and simplify
backporting process.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46889
Hauke Mehrtens [Fri, 11 Sep 2015 20:52:35 +0000 (20:52 +0000)]
wpan-tools: bump to wpan-tools-0.5
Signed-off-by: Varka Bhadram <varkabhadram@gmail.com>
SVN-Revision: 46888
Hauke Mehrtens [Fri, 11 Sep 2015 20:37:47 +0000 (20:37 +0000)]
mac80211: use wl18xx-fw-4.bin
The driver only supports wl18xx-fw-4.bin and does not support the old
firmware wl18xx-fw-3.bin and more.
The wl18xx-conf.bin file was removed upstream it does not fit all
devices any more, see this on how to generate one:
http://processors.wiki.ti.com/index.php/Open_Source_Wireless_Connectivity_wlconf
If someone has a config file for the common platforms with the wifi nic
OpenWrt uses please send a patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46887
Hauke Mehrtens [Fri, 11 Sep 2015 20:37:23 +0000 (20:37 +0000)]
mac80211: add iwlagn debug options
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46886
Hauke Mehrtens [Fri, 11 Sep 2015 20:36:35 +0000 (20:36 +0000)]
mac80211: refresh Intel firmware
- sort firmware
- add newer firmware for Intel chipsets
- newer Intel MVM require firmware
only compile tested
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46885
Hauke Mehrtens [Fri, 11 Sep 2015 20:36:11 +0000 (20:36 +0000)]
mac80211: iwlagn: enable iwlmvm
- reported in forums
- Intel 7260 and 3160 need IWLMVM drivers/firmware
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46884
Hauke Mehrtens [Fri, 11 Sep 2015 20:35:11 +0000 (20:35 +0000)]
mac80211: update linux-firmware to 2014-09-03
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
[update to 2014-09-03 and change to xz]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46883
Hauke Mehrtens [Fri, 11 Sep 2015 20:31:58 +0000 (20:31 +0000)]
mac80211: rt2800-usb: enable "unknown" USB IDs
- should fix issue: https://forum.openwrt.org/viewtopic.php?id=57315
- enable support of more USB stick with rt28xx chipsets
- experimental: USB-IDs not in vendor linux driver
- experimental: "exact chipset is unknown"
- experimental: "enabling these devices may or may not work"
only compile tested
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46882
Hauke Mehrtens [Fri, 11 Sep 2015 20:31:32 +0000 (20:31 +0000)]
kernel: add CONFIG_MIPS_CDMM config option
This driver was added in kernel 4.1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46881
Rafał Miłecki [Fri, 11 Sep 2015 20:00:02 +0000 (20:00 +0000)]
brcm47xx: detect Netgear R6300 V1 & support reset button
It's still far from complete support.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46880
Hauke Mehrtens [Fri, 11 Sep 2015 19:02:53 +0000 (19:02 +0000)]
kernel: Added missing symbols into 4.1 & 4.0 kernel default .config
As requested here #20432 I've
tried to fix the missing symbols from the specified default kernel
config files.
I ran into this problem trying to build an image for x86_64 target
with a custom kernel configuration.
Signed-off-by: Manganini Mirko <mmanganini@gmail.com>
SVN-Revision: 46879
Hauke Mehrtens [Fri, 11 Sep 2015 18:52:42 +0000 (18:52 +0000)]
brcm47xx: update to kernel 4.1
This makes bcm53xx use kernel 4.1 by default now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46878
Hauke Mehrtens [Fri, 11 Sep 2015 18:52:18 +0000 (18:52 +0000)]
bcm53xx: update to kernel 4.1
This makes bcm53xx use kernel 4.1 by default now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46877
Felix Fietkau [Fri, 11 Sep 2015 18:38:02 +0000 (18:38 +0000)]
tools: add tar host build, required for --sort=name which was only added in the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46876
Hauke Mehrtens [Fri, 11 Sep 2015 17:59:12 +0000 (17:59 +0000)]
script: downlaod: change mirror for kernel.org
kernel.org now suggests a different mirror address. this one also
support IPv6 connections and was faster for me.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46875
Hauke Mehrtens [Fri, 11 Sep 2015 17:58:39 +0000 (17:58 +0000)]
binutils: add binutils 2.25.1
This adds binutils 2.25.1 as an option to OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46874
Hauke Mehrtens [Fri, 11 Sep 2015 17:57:39 +0000 (17:57 +0000)]
gcc: update gcc 5.x musl patches
This replaces the musl patches for gcc with the versions which are in
gcc trunk.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46873
Hauke Mehrtens [Fri, 11 Sep 2015 17:55:28 +0000 (17:55 +0000)]
brcm47xx: increase max image size
the trx utile uses a maximum image size of 7.2MB. There are brcm47xx
devices even with serial flash with bigger flash chips, but OpenWrt was
not able to create images for these devices. This patch provides an
additional parameter which increases this limit to 32 MB. There is a
warning in the trx utile code which suggests that bigger images could
overwrite the nvram partition on some devices, but normally the program
writing the image should make sure that it is safe to write it to the
flash.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46872
Hauke Mehrtens [Fri, 11 Sep 2015 17:54:55 +0000 (17:54 +0000)]
brcm47xx: break long lines in image Makefile
This patch changes nothing on the behaviour, it just breaks long lines
with bin/trx to make it easier to add additional parameters.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46871
Felix Fietkau [Fri, 11 Sep 2015 17:17:30 +0000 (17:17 +0000)]
brcm2708: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46870
Felix Fietkau [Fri, 11 Sep 2015 16:35:46 +0000 (16:35 +0000)]
lantiq: Use the BAR0 base address in the ath PCI fixup code
Fixes support for AR9287 on TP-Link TD-W8980 and possibly other devices
which have an ath wifi chip at a PCI address other than 0xb8000000
(TD-W8980 for example has it's wifi chip at 0xbc000000).
Signed-off-by: Geoffrey McRae <geoff@spacevs.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46869
Felix Fietkau [Fri, 11 Sep 2015 16:35:32 +0000 (16:35 +0000)]
ugps: fix filename to eliminate build problems
due to ordering PKG_SOURCE_VERSION is not defined leading
to a filename "ugps-.tar.bz2"
This errors out when an older version is in the dl/ dir (or LOCALMIRROR)
fix order and use uhttpd file naming scheme to visibly include date
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46868
Felix Fietkau [Fri, 11 Sep 2015 16:35:17 +0000 (16:35 +0000)]
base-files: set kernel.core_pattern in sysctl.conf
Move the pattern setting from netifd's service script to
/etc/sysctl.conf. Put the timestamp component '%t' just after
executable name '%e' for more natural order from output of ls command.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46867
Felix Fietkau [Fri, 11 Sep 2015 16:35:02 +0000 (16:35 +0000)]
util-linux: add prlimit command.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46866
Felix Fietkau [Fri, 11 Sep 2015 16:34:49 +0000 (16:34 +0000)]
mvsw61xx: match swconfig function names
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 46865
Felix Fietkau [Fri, 11 Sep 2015 16:34:35 +0000 (16:34 +0000)]
mvsw61xx: use standard swconfig get_port_link
The previous "link" and "status" functions were non-standard,
and thus less useful for parsing.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 46864
Felix Fietkau [Fri, 11 Sep 2015 16:34:22 +0000 (16:34 +0000)]
ipkg-build: add ogargs to outer tar/ipk
prevent name:uid leaks of build system
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46863
Felix Fietkau [Fri, 11 Sep 2015 16:34:08 +0000 (16:34 +0000)]
ar71xx: Restore buildability of the AP121 target
Increase space for kernel and also introduce a 8M flash target into the
Makefile.
Signed-off-by: Attila Lendvai <attila@lendvai.name>
SVN-Revision: 46862
Felix Fietkau [Fri, 11 Sep 2015 16:33:54 +0000 (16:33 +0000)]
hostapd: Add eapol_version config option
Add eapol_version to the openwrt wireless config ssid section.
Only eapol_version=1 and 2 will get passed to hostapd, the default
in hostapd is 2.
This is only useful for really old client devices that don't
accept eapol_version=2.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 46861
Felix Fietkau [Fri, 11 Sep 2015 16:33:39 +0000 (16:33 +0000)]
openvpn: remove __DATE__ from options output
reported by:
https://reproducible.debian.net/openwrt/dbd/ar71xx/base/openvpn-nossl_2.3.7-1_ar71xx.ipk.html
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46860
Felix Fietkau [Fri, 11 Sep 2015 16:33:26 +0000 (16:33 +0000)]
include/image.mk: make tar reproducible
several packages reported different file order between builds
make binutils, kmod-sched reproducible
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46859
Felix Fietkau [Fri, 11 Sep 2015 16:33:12 +0000 (16:33 +0000)]
yaffs2: remove __TIME__ __DATE__ macros
prevent compiler errors with gcc 4.9
increase reproducibility
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46858
Felix Fietkau [Fri, 11 Sep 2015 16:32:58 +0000 (16:32 +0000)]
ramips: Enable RTC support for PBR-M1
The PBR-M1 and other upcoming MT7621 boards have RTC chips on them. The
PBR-M1 also selects the kmod-rtc-pcf8563 by default. But the module itself
will not be build because CONFIG_RTC_CLASS is currently not enabled for its
kernel.
Enabling this option should fix the problem of the missing rtc device on
these boards.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46857
Felix Fietkau [Fri, 11 Sep 2015 16:32:45 +0000 (16:32 +0000)]
ar71xx: fix ar724x clock calculation
According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz
input clock as the REF_CLK instead of 5MHz.
The correct CPU PLL calculation procedure is as follows:
CPU_PLL = (DIV * REF_CLK) / REF_DIV / 2.
This patch is compatible with the current calculation procedure with default
DIV and REF_DIV values.
Test on both AR7240, AR7241 and AR7242.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 46856
Felix Fietkau [Fri, 11 Sep 2015 16:32:28 +0000 (16:32 +0000)]
brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46855
Felix Fietkau [Fri, 11 Sep 2015 16:32:15 +0000 (16:32 +0000)]
brcm2708: add kmod-sound-soc-raspidac3
This adds support for RaspiDAC Rev.3x
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46854
Felix Fietkau [Fri, 11 Sep 2015 16:32:00 +0000 (16:32 +0000)]
brcm2708: update 4.1 patches
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46853
Felix Fietkau [Fri, 11 Sep 2015 16:31:35 +0000 (16:31 +0000)]
target: ar71xx: add support for COMFAST CF-E316N v2 board
This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 46852
Felix Fietkau [Fri, 11 Sep 2015 16:31:18 +0000 (16:31 +0000)]
hostapd: work around unconditional libopenssl build dependency
As the OpenWrt build system only resolves build dependencies per directory,
all hostapd variants were causing libopenssl to be downloaded and built,
not only wpad-mesh. Fix this by applying the same workaround as in
ustream-ssl.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46851
Felix Fietkau [Fri, 11 Sep 2015 16:31:01 +0000 (16:31 +0000)]
opkg: work around unconditional libopenssl build dependency
As the OpenWrt build system only resolves build dependencies per directory,
all opkg variants were causing libopenssl to be downloaded and built,
not only opkg-smime. Fix this by applying the same workaround as in
ustream-ssl.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46850
Rafał Miłecki [Fri, 11 Sep 2015 08:56:37 +0000 (08:56 +0000)]
base-files: change banner to Designated Driver release
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46846
Steven Barth [Fri, 11 Sep 2015 06:46:42 +0000 (06:46 +0000)]
comgt-ncm: Add possibility to choose PDP context type
By setting the option pdptype to IP, IPV6 or IPV4V6 the user can
choose the context type between IPv4, IPv6 and dual stack,
respectively. The default setting is dual stack, except if option
ipv6=0 is specified, in which case IPv4 context is the default.
This allows for an out-of-the-box IPv6 support with modems
utilizing NCM-like protocols.
While we are at it, also add commands for Sierra DirectIP modems
(currently untested), which will allow us to drop the separate
comgt-directip package (once tested and verified working).
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 46844
Steven Barth [Fri, 11 Sep 2015 06:46:40 +0000 (06:46 +0000)]
uqmi: Add proper IPv6 support
Use the new --ip-family option to start both IPv4 and IPv6 sessions
by default. Autoconnect can't be used when starting two sessions,
so revert back to using the client IDs and packet data handles for
handling the network connection.
Some modem firmwares do not implement a RA server, therefore by
default use outband IP configuration and static addressing. Some
other firmwares report bogus IP configuration with the WDS get
current settings command. In this case inband configuration with
DHCP/RA can be optionally enabled by setting option dhcp to 1.
Per 3GPP standard a /64 prefix is served to all clients, which is
extended to LAN as specified in RFC 7278.
v2: Restrict the IPv6 gateway route source address
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 46843
Steven Barth [Fri, 11 Sep 2015 06:46:35 +0000 (06:46 +0000)]
firewall: Remove src_port from firewall.config to receive dhcpv6 replies
Seems like my second try was again whitespace broken. Sorry for the noise.
Remove src_port from firewall.config to receive dhcpv6 replies. Fixes #20295.
Signed-off-by: Anselm Eberhardt <a.eberhardt@cygnusnetworks.de>
SVN-Revision: 46842
Felix Fietkau [Thu, 10 Sep 2015 21:00:19 +0000 (21:00 +0000)]
netifd: update to the latest version, fixes a WDS STA mode regression caused by multicast-to-unicast handling (#20466)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46841
projects / openwrt / staging / hauke.git / log