backports: add git diff support to lib/bpgit.py

This will be used later for proving SmPL patches against
legacy patch series.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: use --ignore-removal for git add

As of git 2.0 --ignore-removal is no longer default so just
make it default tool, without which git will warn us about
this change.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add threaded Coccinelle spatch support

Turns out Coccinelle has threaded support, it lets you
break down the target code you need to parse for a spatch
file into separate buckets, each bucket handling a subset of
the target files needed to be evaluated. This adds support
for that and shaves down the amount of time it gets to
generate target code by 97.19%.

Using:

mcgrof@drvbp1 ~/backports (git::master)$ time \
./gentree.py --verbose \
--clean \
--refresh \
/home/mcgrof/linux-next/ \
/home/mcgrof/build/next-20140311

Before this patch:

real    19m34.867s
user    18m43.492s
sys     0m21.244s

After this patch by using num_cpus threads:

real    2m42.012s
user    21m53.616s
sys     0m22.748s

After this patch by using 3 * num_cpus threads:

real    1m33.316s
user    24m6.080s
sys     0m28.264s

Using num_cpus threads alone was giving 2m42.012s, its why I
experimented in increasing this. I also experimented with
6 * num_cpus threads as well but the amount of time spent
running didn't reduce, lets keep this at 3 * num_cpus for now
and we can experiment and empirically find the best setting for
any system or just make this configurable.

We had SmPL patch integration first committed via
86d99c9d4 back then we were able to scale to a reasonable
similar time:

mcgrof@drvbp1 ~/backports (git::cocci-added)$ time \
./gentree.py --verbsose \
     --clean \
     --refresh \
     /home/mcgrof/linux-next
     /home/mcgrof/build/next-20131113
real    1m1.967s
user    0m49.304s
sys     0m11.880s

For history's purpose here's our run time without Coccinelle on
commit 338c4388cc:

mcgrof@drvbp1 ~/backports (git::before-smpl)$ time \
        ./gentree.py --verbose \
                     --clean \
                     --refresh \
                     /home/mcgrof/linux-next/ \
                     /home/mcgrof/build/next-20131029
real    0m29.639s
user    0m17.508s
sys     0m11.568s

This new changes sets us back on track with the timing for when we first
introduced Coccinelle support we just have a lot 5 Coccinelle patches
now. I hope this shows we should be able to scale with Coccinelle much more
efficiently for collateral evolutions that sprinkle through tons of
files.

Screenshots available using htop before [0] and after the patch [1]
while coccinelle is running, this shows how the system is using
resources much more efficiently when doing spatch evaluation for
patch generation on target code.

[0] http://drvbp1.linux-foundation.org/~mcgrof/images/coccinelle-backports/before-threaded-cocci.png
[1] http://drvbp1.linux-foundation.org/~mcgrof/images/coccinelle-backports/after-threaded-cocci.png

Cc: Peter Senna <peter.senna@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Gilles Muller <Gilles.Muller@lip6.fr>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: backport inet_frag_maybe_warn_overflow()

This is used by the ieee802154 reassembly code. This is
a straight forward backport.

mcgrof@ergon ~/linux-next (git::master)$ git describe --contains 5a3da1fe95
v3.9-rc4~27^2

commit 5a3da1fe9561828d0ca7eca664b16ec2b9bf0055
Author: Hannes Frederic Sowa <hannes@stressinduktion.org>
Date:   Fri Mar 15 11:32:30 2013 +0000

    inet: limit length of fragment queue hash table bucket lists

    This patch introduces a constant limit of the fragment queue hash
    table bucket list lengths. Currently the limit 128 is choosen somewhat
    arbitrary and just ensures that we can fill up the fragment cache with
    empty packets up to the default ip_frag_high_thresh limits. It should
    just protect from list iteration eating considerable amounts of cpu.

    If we reach the maximum length in one hash bucket a warning is printed.
    This is implemented on the caller side of inet_frag_find to distinguish
    between the different users of inet_fragment.c.

    I dropped the out of memory warning in the ipv4 fragment lookup path,
    because we already get a warning by the slab allocator.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jesper Dangaard Brouer <jbrouer@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: backport frag helper functions for mem limit tracking

Jesper added frag helper functions through commit d433673e5f
added on. This is a straight forward backport using the LINUX_BACKPORT()
namespace.

mcgrof@ergon ~/linux-next (git::master)$ git describe --contains d433673e5f
v3.9-rc1~139^2~232^2~2

commit d433673e5f9180e05a770c4b2ab18c08ad51cc21
Author: Jesper Dangaard Brouer <brouer@redhat.com>
Date:   Mon Jan 28 23:45:12 2013 +0000

    net: frag helper functions for mem limit tracking

    This change is primarily a preparation to ease the extension of memory
    limit tracking.

    The change does reduce the number atomic operation, during freeing of
    a frag queue.  This does introduce a some performance improvement, as
    these atomic operations are at the core of the performance problems
    seen on NUMA systems.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: backport skb_unclone()

Pravin added this via commit 14bbd6a565 through v3.9. This is
a straight forward backport using the LINUX_BACKPORT() namespace.

mcgrof@ergon ~/linux-next (git::master)$ git describe --contains 14bbd6a565
v3.9-rc1~139^2~56

commit 14bbd6a565e1bcdc240d44687edb93f721cfdf99
Author: Pravin B Shelar <pshelar@nicira.com>
Date:   Thu Feb 14 09:44:49 2013 +0000

    net: Add skb_unclone() helper function.

    This function will be used in next GRE_GSO patch. This patch does
    not change any functionality.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: backport definition of struct frag_queue

Commit b836c99f by Amerigo which got added on v3.7 generalized
the conntrack struct frag_queue while unifying the conntrack
reassembly expire code with a standard one. Although we won't
use the expiry code, another subsystem which we backport, the
ieee802154 6lowpan subsystem, makes use of this structure for
its own reassembly code. This makes that structure available
for older kernels.

mcgrof@ergon ~/linux-next (git::master)$ git describe --contains b836c99f
v3.7-rc1~145^2~136

Cc: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: define ETH_P_80221

This is used by the bluetooth and ieee802154 subsystems later
and added via commit b62faf3c available on next-20140311.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: bump drivers dependency that require I2C bus classes

Drivers that depend on I2C bus segments behind multiplexers to
have a class require quite a bit of collateral changes that I
don't have time to address. For those interested in trying to backport
this see commit eee543e8. This bumps the drivers that depend on this
that we carry to require at least v3.7 when this collateral evolution
was introduced. One driver is affected, rtl2832 -- defined under
CONFIG_DVB_RTL2832.

mcgrof@ergon ~/linux (git::master)$ git describe --contains eee543e82481
v3.7-rc1~92^2~14

commit eee543e8248150e8fb833943c71f40c7b1724600
Author: Jean Delvare <khali@linux-fr.org>
Date:   Fri Oct 5 22:23:51 2012 +0200

    i2c-mux: Add support for device auto-detection

    Let I2C bus segments behind multiplexers have a class. This allows for
    device auto-detection on these segments. As long as parent segments
    don't share the same class, it should be fine.

    I implemented support in drivers i2c-mux-gpio and i2c-mux-pca954x. I
    left i2c-mux-pca9541 and i2c-mux-pinctrl alone for the moment as I
    don't know if this feature makes sense for the use cases of these
    drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Korsgaard <peter.korsgaard@barco.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Michael Lawnick <ml.lawnick@gmx.de>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: bump kernel reqs for WL1251_SDIO and WLCORE_SDIO

There has been quite a bit of updates to the gpio driver library,
and while we can backport some of this it doesn't make much sense
as folks using this driver are expected to be carrying over the
required architecture changes. In particular the GPIO_DEVRES has
been tucked under GPIO_LIB and later removed from depending on it
(see b69ac5244 and 6a89a314a)

mcgrof@ergon ~/linux-next (git::master)$ git describe --contains 6a89a314a
v3.9-rc1~76^2~12^2~13

mcgrof@ergon ~/linux-next (git::master)$ git describe --contains b69ac5244
v3.13-rc1~120^2~7

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: make WL1251_SPI depend on >= 3.5

The WL1251_SPI driver now depends on EPROBE_DEFER and others which
we canot backports that pushes it to require 3.4 but since it also
relies on devm_gpio_request_one() we bump it to 3.5. The gpio layer
has received quite a bit of updates and it doesn't make sense to
backport them separately.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: backport MPLS support

This simply the files that define the structures and
defines used to decode MPLS on the skb. For an example
usage see 960d97f95. The headers were added first via
f3baa393ff.

commit f3baa393ffc9a7aefc0bf767729382085e81f606
Author: Simon Wunderlich <sw@simonwunderlich.de>
Date:   Mon Mar 3 17:23:11 2014 +0100

    UAPI: add MPLS label stack definition

    Labels for the Multiprotocol Label Switching are defined in RFC 3032
    which was superseded by RFC 5462. Add the definition to UAPI and a stub
    header for include/linux.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 960d97f9518ef6fb8ff87450d6b0c88ce5df9532
Author: Simon Wunderlich <sw@simonwunderlich.de>
Date:   Mon Mar 3 17:23:12 2014 +0100

    cfg80211: add MPLS and 802.21 classification

    MPLS labels may contain traffic control information, which should be
    evaluated and used by the wireless subsystem if present.

    Also check for IEEE 802.21 which is always network control traffic.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: ifdef some pci functions

struct msix_entry entry is defined only when CONFIG_PCI
is defined, resulting in warnings like:

backport-include/linux/pci.h:256:16: warning: 'struct msix_entry' declared inside parameter list [enabled by default]
backport-include/linux/pci.h:256:16: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]

wrap (also the mock function) with appropriate ifdef CONFIG_PCI.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add crypto/ccm backport

This seems to commonly be missing in the random kernels
people use, so just provide a backport.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix compilation with CONFIG_OF

There are two users of of_find_property_value_of_size() which is
originally static in the kernel, but we need it exposed (but not
exported) so that multiple backport files can use it; do that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: refresh patches on next-20140221

manual changes were needed on these files:
 * patches/backport-adjustments/flow_dissector.patch
 * patches/collateral-evolutions/network/16-bluetooth/net_bluetooth_hidp_core.patch
 * patches/collateral-evolutions/network/83-select_queue/mac80211.patch
 * patches/collateral-evolutions/network/83-select_queue/mwifiex.patch
 * patches/collateral-evolutions/network/85-hid_ll_driver/net_bluetooth_hidp_core.patch

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.101             [  OK  ]
17  3.1.10              [  OK  ]
18  3.2.54              [  OK  ]
19  3.3.8               [  OK  ]
20  3.4.79              [  OK  ]
21  3.5.7               [  OK  ]
22  3.6.11              [  OK  ]
23  3.7.10              [  OK  ]
24  3.8.13              [  OK  ]
25  3.9.11              [  OK  ]
26  3.10.29             [  OK  ]
27  3.11.10             [  OK  ]
28  3.12.10             [  OK  ]
29  3.13.2              [  OK  ]
30  3.14-rc1            [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove usage of net_device member qdisc_tx_busylock

This member was added ion more recent kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add NLA_S{9,16,32,64}

This is needed by net/ieee802154/nl_policy.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add of_property_read_u32_index()

This is needed by drivers/regulator/gpio-regulator.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add of_property_count_u32_elems()

This is needed by drivers/regulator/gpio-regulator.c

This also adds of_property_count_elems_of_size()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add devm_kstrdup()

This is needed by drivers/regulator/fixed.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add pci_enable_msix_range()

This is needed by drivers/net/ethernet/intel/igb/igb_main.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add pci_enable_msi_range()

This is needed by drivers/net/wireless/ath/wil6210/pcie_bus.c

pci_enable_msi_block() was added in kernel 2.6.30, so this does not
work on older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add snd_card_new()

This is needed by drivers/media/pci/cx18/cx18-alsa-main.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add VHCI_MINOR

This is needed by drivers/bluetooth/hci_vhci.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add atomic64_set()

atomic64_set() is now used by mac80211 and it is not available on some
old arm kernels.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix indenting

Replace spaces with tabs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: backport ACPI_HANDLE(dev)

In earlier kernel versions the define for retrieving the acpi handle was
called DEVICE_ACPI_HANDLE, so just use it.

Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: copy sch_fq_codel.c from kernel

Instead of using an own version of sch_fq_codel.c make backports copy
that code from the kernel and use that. This ensures that we will
always use the latest version.
This also includes flow_dissector.c which provides a function used by
sch_fq_codel.c.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: copy sch_codel.c from kernel

Instead of using an own version of sch_codel.c make backports copy that
code from the kernel and use that. This ensures that we will always use
the latest version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: copy cordic from kernel

Instead of using an own version of cordic.c make backports copy that
code from the kernel and use that. This ensures that we will always use
the latest version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add ETH_P_TEB and ETH_P_8021AD

This is needed by net-core-flow_dissector.c.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add ipv6_addr_hash()

This is needed by net-core-flow_dissector.c Kernel < 2.6.25 and kernel
> 3.6 have this function.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: REGULATOR_S5M8767 depends on kernel 3.15

This driver needs some additional struct members in struct
sec_regulator_data which are not available in a kernel < 3.15

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: conditionally access net/ieee802154/ with make

This essentially reverts commit cb6f08d3c38c as that caused
issues with copy-list - the scripting when generating the
backport can't prove that net/ieee802154/ isn't needed and
will try to go into it even if it wasn't copied.

Instead, make net/ieee802154/ be entered whenever it might
be needed - which is for CPTCFG_IEEE802154 and CPTCFG_BT.
This is harmless if the directory ends up listed twice but
will cause this problem to disappear.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: make BACKPORT_BUILD_LEDS depend on LEDS_CLASS=n

Somehow !LEDS_CLASS and LEDS_CLASS=n seem to be different (likely
because LEDS_CLASS is tristate, but BACKPORT_BUILD_LEDS is just a
bool), so use LEDS_CLASS=n to fix build issues in other cases on
certain kernel configurations.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches on next-20140207

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.101             [  OK  ]
17  3.1.10              [  OK  ]
18  3.2.54              [  OK  ]
19  3.3.8               [  OK  ]
20  3.4.79              [  OK  ]
21  3.5.7               [  OK  ]
22  3.6.11              [  OK  ]
23  3.7.10              [  OK  ]
24  3.8.13              [  OK  ]
25  3.9.11              [  OK  ]
26  3.10.29             [  OK  ]
27  3.11.10             [  OK  ]
28  3.12.10             [  OK  ]
29  3.13.2              [  OK  ]
30  3.14-rc1            [  OK  ]

Manual changes were needed in
patches/collateral-evolutions/network/16-bluetooth/net_bluetooth_hidp_core.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: update test kernel versions

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: update sch_fq_codel_core.c

This brings sch_fq_codel_core.c to the version used in kernel 3.14-rc1.
Most of the changes were done many kernel versions before 3.14-rc1, but
in kernel 3.14-rc1 net_random() was removed and not it does not even
compile any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add compat_put_timespec()

This is used by v4l2-compat-ioctl32.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove bluetooth HIDP transport-driver functions

The function pointer raw_request and output_report in struct
hid_ll_driver will be added with kernel 3.15, remove useage on
older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add led_trigger_blink{_oneshot}()

When led support is deactivated in the kernel and
CPTCFG_BACKPORT_BUILD_LEDS is set mac80211 references
led_trigger_blink_oneshot() but it is not declared anywhere.

This fixes the following build error:
net/mac80211/led.c: In function 'ieee80211_led_rx':
net/mac80211/led.c:25:2: error: implicit declaration of function 'led_trigger_blink_oneshot' [-Werror=implicit-function-declaration]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: backport power efficient workqueues

These only exist starting from 3.11, and wireless code will
start using them soon. Backport them as simple defines using
the corresponding non-power-efficient workqueues.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh on next-20140131

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.101             [  OK  ]
17  3.1.10              [  OK  ]
18  3.2.54              [  OK  ]
19  3.3.8               [  OK  ]
20  3.4.77              [  OK  ]
21  3.5.7               [  OK  ]
22  3.6.11              [  OK  ]
23  3.7.10              [  OK  ]
24  3.8.13              [  OK  ]
25  3.9.11              [  OK  ]
26  3.10.27             [  OK  ]
27  3.11.10             [  OK  ]
28  3.12.8              [  OK  ]
29  3.13-rc8            [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: enable igb and add defconfig

Add defconfig and necessary files to copy-list.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.1

- add IFF_UNICAST_FLT define
- add PCI_DEV_FLAGS_ASSIGNED define
- add skb_frag_size_sub()
- add skb_frag_address()
- add patches/collateral-evolutions/network/84-ethernet/0011-igb_ethtool_ops.patch
- add patches/collateral-evolutions/network/84-ethernet/0012-igb_ndo_set_vf_spoofchk.patch

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.2

- add patches/collateral-evolutions/network/84-ethernet/0009-igb_vlan_rx_vid.patch
- add patches/collateral-evolutions/network/84-ethernet/0010-igb_ethtool_ops.patch

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.3

- add IFF_SUPP_NOFCS define
- add patches/collateral-evolutions/network/84-ethernet/0008-igb_no_fcs.patch

Is there a better way to handle struct sk_buff changes?

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.4

- add struct timestamp_event_queue
- add struct ptp_clock
- add ptp_clock_index()
- add patches/collateral-evolutions/network/84-ethernet/0007-igb_ethtool_ops.patch

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.5

- add EEE defines
- backport __skb_alloc_page and __skb_alloc_pages
- add patches/collateral-evolutions/network/84-ethernet/0006-igb_eee.patch

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.6

- backport mmd_eee_adv_to_ethtool_adv_t
- add define to map ptp_clock_register() to old version
- add patches/collateral-evolutions/network/84-ethernet/0004-igb_err_handler.patch
- add patches/collateral-evolutions/network/84-ethernet/0005-igb_mdi.patch

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.7

- add pci_sriov_set_totalvfs()
- add patches/collateral-evolutions/network/84-ethernet/0002-igb_pci_sriov_configure.patch

Several ifdefs in igb_main.c to avoid compiler warnings.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.8

- add missing NETDEV_FRAG defines

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.9

- add struct pci_sriov
- add pci_vfs_assigned()
- add PCI_SRIOV defines
- add patches/collateral-evolutions/network/84-ethernet/0001-igb_net_device_ops.patch

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.12

- refactor u64_stats_sync.h a bit
- add u64_stats_init define

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: igb fixes for linux-3.13

- add patches/collateral-evolutions/network/84-ethernet/0013-igb_hwmon.patch

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix uninstall filename

The uninstall script calculated the filename in the wrong way. It added
the current working dir into the file name, this resulted in names like
this:
/lib/modules/2.6.32-431.3.1.el6.x86_64/updates//home/hauke/backports-20140124/drivers/net/wireless/ipw2x00/ipw2100.ko
The correct one would be this
/lib/modules/2.6.32-431.3.1.el6.x86_64/updates/drivers/net/wireless/ipw2x00/ipw2100.ko

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh on next-20140124

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.101             [  OK  ]
17  3.1.10              [  OK  ]
18  3.2.54              [  OK  ]
19  3.3.8               [  OK  ]
20  3.4.77              [  OK  ]
21  3.5.7               [  OK  ]
22  3.6.11              [  OK  ]
23  3.7.10              [  OK  ]
24  3.8.13              [  OK  ]
25  3.9.11              [  OK  ]
26  3.10.27             [  OK  ]
27  3.11.10             [  OK  ]
28  3.12.8              [  OK  ]
29  3.13-rc8            [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: always access net/ieee802154/ with make

In the kernel make will always access net/ieee802154/, we should do the
same.

This was changes in the kenrel in this commit:
commit a53d34c3465b8a840f7400932ae1b0a9f9ed6bef
Author: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Date:   Wed Jan 15 02:50:40 2014 +0400

    net: move 6lowpan compression code to separate module

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add __sockaddr_check_size()

This is used by net/bluetooth/l2cap_sock.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add DECLARE_SOCKADDR

This is used by net/bluetooth/l2cap_sock.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh on next-20140117

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.101             [  OK  ]
17  3.1.10              [  OK  ]
18  3.2.54              [  OK  ]
19  3.3.8               [  OK  ]
20  3.4.77              [  OK  ]
21  3.5.7               [  OK  ]
22  3.6.11              [  OK  ]
23  3.7.10              [  OK  ]
24  3.8.13              [  OK  ]
25  3.9.11              [  OK  ]
26  3.10.27             [  OK  ]
27  3.11.10             [  OK  ]
28  3.12.8              [  OK  ]
29  3.13-rc8            [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix unused hidp_get_raw_report() warning

This fixes the following warning:

/net/bluetooth/hidp/core.c:271:12: warning: ‘hidp_get_raw_report’ defined but not used [-Wunused-function]
 static int hidp_get_raw_report(struct hid_device *hid,
            ^

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix unused atl1e_rx_mode() warning

This fixes the following warning:

/drivers/net/ethernet/atheros/atl1e/atl1e_main.c:328:13: warning: ‘atl1e_rx_mode’ defined but not used [-Wunused-function]
 static void atl1e_rx_mode(struct net_device *netdev,
             ^

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix unused var ret warning

This fixes the following warning:

/drivers/net/wireless/mwifiex/sta_cmd.c: In function ‘mwifiex_cmd_cfg_data’:
/drivers/net/wireless/mwifiex/sta_cmd.c:1196:6: warning: unused variable ‘ret’ [-Wunused-variable]
  int ret;
      ^

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix unused mwifiex_sdio_resume() warning

This fixes the following warning:

/drivers/net/wireless/mwifiex/sdio.c:124:12: warning: ‘mwifiex_sdio_resume’ defined but not used [-Wunused-function]
 static int mwifiex_sdio_resume(struct device *dev)
            ^

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix led_trigger warning with old kernel versions

This fixes the following warning:

/drivers/net/wireless/at76c50x-usb.c: In function ‘at76_mod_init’:
/drivers/net/wireless/at76c50x-usb.c:2472:2: warning: passing argument 2 of ‘led_trigger_register_simple’ from incompatible pointer type [enabled by default]
  led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
  ^
In file included from /backport-include/linux/leds.h:3:0,
                 from /drivers/net/wireless/at76c50x-usb.c:45:
include/linux/leds.h:97:13: note: expected ‘struct led_trigger **’ but argument is of type ‘struct backport_led_trigger **’
 extern void led_trigger_register_simple(const char *name,
             ^
/drivers/net/wireless/at76c50x-usb.c: In function ‘at76_mod_exit’:
/drivers/net/wireless/at76c50x-usb.c:2484:2: warning: passing argument 1 of ‘led_trigger_unregister_simple’ from incompatible pointer type [enabled by default]
  led_trigger_unregister_simple(ledtrig_tx);
  ^
In file included from /backport-include/linux/leds.h:3:0,
                 from /drivers/net/wireless/at76c50x-usb.c:45:
include/linux/leds.h:99:13: note: expected ‘struct led_trigger *’ but argument is of type ‘struct backport_led_trigger *’
 extern void led_trigger_unregister_simple(struct led_trigger *trigger);
             ^

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add prefix infront of ether_addr_equal_{unaligned, 64bits}()

RedHat 6.5 already contains ether_addr_equal_64bits() which will
conflict with our declaration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add IS_BUILTIN()

This is needed by bcma.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: backport get_stats in alx driver

alx_get_stats64() was added recently to alx driver, but on kernel <
2.6.30 only get_stats is available, convert the function on such
kernels to use the old api.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix header of phy_mii_ioctl()

On kernel versions < 2.6.36 phy_mii_ioctl() gets struct mii_ioctl_data
as second parameter and on more recent kernel versions it takes struct
ifreq. This patch converts one version to the other.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add linux/irqdomain.h

ssb uses this header file, but does not use any of the functions in
there in the default config, because that is only used when
SSB_DRIVER_GPIO and SSB_EMBEDDED are activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add ATTRIBUTE_GROUPS unconditionally

net/bluetooth/hci_sysfs.c uses ATTRIBUTE_GROUPS on all kernel versions.
Now it has to be for older kernel versions as well and
__ATTRIBUTE_GROUPS is also needed for these old versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add sdio device id list

This copies the sdio device id list into backprots, this is used by
brcmfmac.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: do not activate BCMA_HOST_SOC on kernel < 3.7

drivers/bcma/driver_gpio.c calls irq_set_chip_and_handler() when
BCMA_HOST_SOC is activated. irq_set_chip_and_handler() gets exported on
kernel >= 3.7, we should not activate this on any older kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add USB_DEVICE_INTERFACE_CLASS

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: adapt to changes in netdev select_queue call

This patch reverts the changes done in the following commit for older
kernel versions:
commit f663dd9aaf9ed124f25f0f8452edf238f087ad50
Author: Jason Wang <jasowang@redhat.com>
Date:   Fri Jan 10 16:18:26 2014 +0800

    net: core: explicitly select a txq before doing l2 forwarding

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
CC: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

backports: refresh on next-20140106

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.101             [  OK  ]
17  3.1.10              [  OK  ]
18  3.2.54              [  OK  ]
19  3.3.8               [  OK  ]
20  3.4.77              [  OK  ]
21  3.5.7               [  OK  ]
22  3.6.11              [  OK  ]
23  3.7.10              [  OK  ]
24  3.8.13              [  OK  ]
25  3.9.11              [  OK  ]
26  3.10.27             [  OK  ]
27  3.11.10             [  OK  ]
28  3.12.8              [  OK  ]
29  3.13-rc8            [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add missing header file

The act8865 regulator driver needs this header file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: do not build ACT8865 with kernel < 3.12

This driver uses some members of struct regulator_desc which were added
in kernel 3.12.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add ether_addr_equal_unaligned()

ether_addr_equal_unaligned() is used by some drivers.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add ether_addr_equal_64bits()

This is used by some drivers now

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix iwlwifi threaded IRQ patches

Modifications upstream affected:
 * drivers_net_wireless_iwlwifi_pcie_internal.patch
 * drivers_net_wireless_iwlwifi_pcie_trans.patch

Manually refresh the patches.

Change-Id: Iad8218a243e644352c3b1029d12795c528259dde
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree: create *.tar.gz instead of *.tar.bz for 

kernel.org does not support bzip2 any more, use gzip instead.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add missing include

A user reported that the linux/mm.h header was missing on his mips
device with kernel 2.6.26.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add prefix infront of led_blink_set()

led_blink_set is also exported by the RedHat 6.5 kernel and collides
with backports when loading the compat.ko module. This fixes the
problem by prefixing the symbol.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh on next-20131224

manual changes done to:
patches/collateral-evolutions/network/25-multicast-list_head/include_net_mac80211.patch
patches/collateral-evolutions/network/25-multicast-list_head/net_mac80211_driver-ops.patch
patches/collateral-evolutions/network/25-multicast-list_head/net_mac80211_iface.patch
patches/collateral-evolutions/network/64-b44-32bit-stats/drivers_net_ethernet_broadcom_b44.patch
patches/collateral-evolutions/network/70-umode_t-api-change/drivers_net_wireless_ath_ath9k_debug.patch

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.101             [  OK  ]
17  3.1.10              [  OK  ]
18  3.2.54              [  OK  ]
19  3.3.8               [  OK  ]
20  3.4.77              [  OK  ]
21  3.5.7               [  OK  ]
22  3.6.11              [  OK  ]
23  3.7.10              [  OK  ]
24  3.8.13              [  OK  ]
25  3.9.11              [  OK  ]
26  3.10.27             [  OK  ]
27  3.11.10             [  OK  ]
28  3.12.8              [  OK  ]
29  3.13-rc8            [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: update kernel versions

Update to current versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix i2c_add_mux_adapter() parameters

The class parameter was added in kernel 3.7 to i2c_add_mux_adapter()
and could just be ignored by older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: copy include/uapi/linux/vsp1.h

This header file is now needed by a media driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: build some regulator drivers only with recent kernels

When these drivers are build with older kernel versions we get build
errors.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add printk_ratelimited()

This adds the backport for some printk_ratelimited() functions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove CRC8 backport

This is not used by any driver any more. brcmsmac was the only driver
selecting this, but did not used it since some months, now it does not
even select it any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: backport multicast list handling in iwlwifi mvm

Backport multicast list handling for kernel < 2.6.35 in iwlwifi mvm
driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove usage of addr_assign_type in 6lowpan.c

The bluetooth 6lowpan code now accesses the addr_assign_type member of
struct netdev, which is not available in older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add include/net/af_ieee802154.h file

This file was added in kernel 2.6.32 and is now needed by bluetooth.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove usage of members of struct property for kernel < 2.6.39

struct property is missing in the general header files in older kernel
versions. There are different versions of this header depending on the
architecture code in use. This removed the access to any members of
struct property for older kernel version when CONFIG_OF is not set.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: make b44 depend on kernel > 2.6.28

The mdio bus functions where introduced in that version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix number of arguments of phy_connect()

The flags argument was removed from phy_connect in this commit:

commit f9a8f83b04e0c362a2fc660dbad980d24af209fc
Author: Florian Fainelli <florian@openwrt.org>
Date:   Mon Jan 14 00:52:52 2013 +0000

    net: phy: remove flags argument from phy_{attach, connect, connect_direct}

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add include/trace/events/v4l2.h file

v4l2 now supports tracing and needs a new header file that was missing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>