John L. Hammond [Sun, 18 Sep 2016 20:38:00 +0000 (16:38 -0400)]
staging: lustre: obd: cleanup struct md_op_data and uses
Make the following changes in or around struct md_op_data:
* rename enum op_cli_flags to enum md_cli_flags.
* Change to type of the op_flags member from __u32 to enum
md_op_flags.
* Remove the used but never set member op_npages.
* Remove the set but never used member op_stripe_offset (an alias for
op_ioepoch).
* Remove the op_max_pages alias for op_valid and add a op_max_pages
member.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11734
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 18 Sep 2016 20:37:59 +0000 (16:37 -0400)]
staging: lustre: mdc: fix comparison between signed and unsigned
Change type of client_obd->*_mds_*size from int to __u32 and
argumanets of related create/rename/setattr functions.
Change type of op_data->op_namelen to size_t.
Change type of argument size for all mdc_*_pack() to size_t.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5577
Reviewed-on: http://review.whamcloud.com/11379
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Boyko [Sun, 18 Sep 2016 20:37:58 +0000 (16:37 -0400)]
staging: lustre: at: net AT after connect
Once connected, the previously gathered AT statistics is not valid
anymore because may reflect other routing, etc. The connect by itself
could take a long time due to different reasons (e.g. server was not
ready) and net latency got very high (see import_select_connection())
what does not reflect the current situation.
Take into account only the current (re-)CONNECT rpc latency.
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Signed-off-by: Alexander Boyko <alexander_boyko@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5380
Xyratex-bug-id: MRP-1285
Reviewed-on: http://review.whamcloud.com/11155
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Sun, 18 Sep 2016 20:37:57 +0000 (16:37 -0400)]
staging: lustre: statahead: race in start/stop statahead
When starting statahead thread, it should check whether current
lli_opendir_key was deauthorized in the mean time by another
process.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3270
Reviewed-on: http://review.whamcloud.com/9666
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Sun, 18 Sep 2016 20:37:56 +0000 (16:37 -0400)]
staging: lustre: statahead: ll_intent_drop_lock() called in spinlock
ll_intent_drop_lock() may sleep, which should not be called inside
spinlock.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2272
Reviewed-on: http://review.whamcloud.com/9665
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Sun, 18 Sep 2016 20:37:55 +0000 (16:37 -0400)]
staging: lustre: statahead: use dcache-like interface for sa entry
Rename ll_sa_entry to sa_entry, and manage sa_entry cache with
dcache-like interfaces.
sa_entry is not needed to be refcounted, because only scanner
can free it, so after it's put in stat list, statahead thread
shouldn't access it any longer.
ll_statahead_interpret() doesn't need to take sai refcount,
because statahead thread will wait for all inflight RPC to
finish.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3270
Reviewed-on: http://review.whamcloud.com/9664
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sun, 18 Sep 2016 20:37:54 +0000 (16:37 -0400)]
staging: lustre: llite: allow setting stripes to specify OSTs
Extend the llite layer to support specifying individual target
OSTs. Support specifying OSTs for regular files only. Directory
support will be implemented later in a separate project. With
this a file could have for example a OST index layout of
2,4,5,9,11. In addition, duplicate indices will be eliminated
automatically. Calculate the max easize by ld_active_tgt_count
instead of ld_tgt_count. However this may introduce problems
when the OSTs are in recovery because non sufficient buffer
may be allocated to store EA.
Signed-off-by: Jian Yu <jian.yu@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4665
Reviewed-on: http://review.whamcloud.com/9383
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henri Doreau [Sun, 18 Sep 2016 20:37:53 +0000 (16:37 -0400)]
staging: lustre: llite: Add ioctl to get parent fids from link EA.
Added LL_IOC_GETPARENT to retrieve the <parent_fid>/name(s) of a given
entry, based on its link EA. This saves multiple calls to
path2fid/fid2path.
Merged with second later patch that does various cleanups.
Avoid unneeded allocation. Get read-only attributes from the user
getparent structure and write the modified attributes only, instead
of populating a whole structure in kernel and copying it back.
Signed-off-by: Thomas Leibovici <thomas.leibovici@cea.fr>
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3613
Reviewed-on: http://review.whamcloud.com/7069
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5837
Reviewed-on: http://review.whamcloud.com/12527
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 18 Sep 2016 20:37:52 +0000 (16:37 -0400)]
staging: lustre: obd: restore linkea support
Original linkea was only used for the lustre server code
so it was removed from the upstream client. Now it needs
to be restored for client work that uses this infrastructure.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Sun, 18 Sep 2016 20:37:51 +0000 (16:37 -0400)]
staging: lustre: lmv: add testing for bad name hash
Enable testing of the lfsck recovery feature in the
client code for the case when name hash for some
entry becomes corrupt.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5519
Reviewed-on: http://review.whamcloud.com/11846
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Sheng [Sun, 18 Sep 2016 20:37:50 +0000 (16:37 -0400)]
staging: lustre: llite: ensure all data flush out when umount
Write out all extents when clear inode. Otherwise we
may lose data while umount.
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5584
Reviewed-on: http://review.whamcloud.com/12103
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Fertman [Sun, 18 Sep 2016 20:37:49 +0000 (16:37 -0400)]
staging: lustre: ldlm: per-export lock callback timeout
The lock callback timeout is calculated as an average per namespace.
This does not reflect individual client behavior.
Instead, we should calculate it on a per-export basis.
This is the client side changes for upstream client.
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4942
Reviewed-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Reviewed-by: Alexey Lyashkov <Alexey_Lyashkov@xyratex.com>
Xyratex-bug-id: MRP-417
Reviewed-on: http://review.whamcloud.com/9336
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Sun, 18 Sep 2016 20:37:48 +0000 (16:37 -0400)]
staging: lustre: lmv: move some inline functions to lustre_lmv.h
Move some inline code out of lmv core into lustre_lmv.h.
This is to prepare for use outside of the lmv layer in
the future of these functions. Change from passing in
struct lmv_stripe_md to just int for lmv_is_known_hash_type.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5519
Reviewed-on: http://review.whamcloud.com/11845
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henri Doreau [Sun, 18 Sep 2016 20:37:47 +0000 (16:37 -0400)]
staging: lustre: Flexible changelog format.
Added jobid fields to Changelog records (and extended records). The
CLF_JOBID flags allows to check if the field is present or not (old
format) when reading an entry. Jobids are expressed as 32 chars long,
zero-terminated strings. Updated test_205 in sanity.sh.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1996
Reviewed-on: http://review.whamcloud.com/4060
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Xi [Sun, 18 Sep 2016 20:37:46 +0000 (16:37 -0400)]
staging: lustre: llite: enforce pool name length limit
The pool related codes have some inconsistency about the length
of pool name. Creating and setting a pool name of length 16
to a directory will succeed. However, creating a file under
that directory will fail.
This patch disables any pool name which is longer or equal to
16. And it changes LOV_MAXPOOLNAME from 16 to 15 which might
cause some invalid LLOG records of OST pools with 16 byte names.
It is not a problem since invalid LLOG records are just ignored.
And OST pools with 16 byte names won't work well anyway on the
old versions. There will be problem of inconsistency if part of
the servers have this patch and part of the servers don't. But
it would be safe to assume that this is not a normal
configuration.
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5054
Reviewed-on: http://review.whamcloud.com/10306
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Champion [Sun, 18 Sep 2016 20:37:45 +0000 (16:37 -0400)]
staging: lustre: llite: handle concurrent use of cob_transient_pages
With the lockless __generic_file_aio_write introduced in LU-1669,
ll_direct_IO_26 is no longer protected by the inode i_isem.
This renders obsoltete checks that all transient pages have been
handled before and after entry, and requires atomic access to their
counter.
Signed-off-by: Stephen Champion <schamp@sgi.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5700
Reviewed-on: http://review.whamcloud.com/12179
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 18 Sep 2016 20:37:44 +0000 (16:37 -0400)]
staging: lustre: lmv: remove dead code
The member lmv_obd->server_timeout and function lmv_set_timeouts()
are not used.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-991
Reviewed-on: http://review.whamcloud.com/11880
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Champion [Sun, 18 Sep 2016 20:37:43 +0000 (16:37 -0400)]
staging: lustre: misc: Reduce exposure to overflow on page counters.
When the number of an object in use or circulation is tied to memory
size of the system, very large memory systems can overflow 32 bit
counters. This patch addresses overflow on page counters in the osc LRU
and obd accounting.
Signed-off-by: Stephen Champion <schamp@sgi.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4856
Reviewed-on: http://review.whamcloud.com/10537
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 18 Sep 2016 20:37:42 +0000 (16:37 -0400)]
staging: lustre: lmv: change type of lmv_obd->tgts_size to u32
tgts_size is used as unsigned.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5577
Reviewed-on: http://review.whamcloud.com/11881
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 18 Sep 2016 20:37:41 +0000 (16:37 -0400)]
staging: lustre: obd: change type of lmv_tgt_desc->ltd_idx to u32
ltd_idx is used as unsigned.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5577
Reviewed-on: http://review.whamcloud.com/11879
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:40 +0000 (16:37 -0400)]
staging: lustre: llite: don't call make_bad_inode() on an old inode
In ll_iget() if ll_update_inode() fails then do not call
make_bad_inode() on the inode since it may still be in use.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5468
Reviewed-on: http://review.whamcloud.com/11609
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:39 +0000 (16:37 -0400)]
staging: lustre: obd: rename LUSTRE_STRIPE_MAXBYTES
Rename LUSTRE_STRIPE_MAXBYTES to LUSTRE_EXT3_STRIPE_MAXBYTES and
correct the comment describing its use.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11800
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:38 +0000 (16:37 -0400)]
staging: lustre: remove lustre_lite.h
Move several definition only used in lustre/llite/ to
lustre/llite/llite_internal.h.
Remove lustre/include/{,linux/}lustre_lite.h and fixup
the missing includes in other headers that this exposes.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11501
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrick Farrell [Sun, 18 Sep 2016 20:37:37 +0000 (16:37 -0400)]
staging: lustre: osc: debug to match extent to brw RPC
Currently, it's difficult to match brw RPCs to objects and
extents from client logs. This patch adds a D_RPCTRACE
debug message giving the necessary information.
Signed-off-by: Patrick Farrell <paf@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5531
Reviewed-on: http://review.whamcloud.com/11548
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@seagate.com>
Reviewed-by: Ann Koehler <amk@cray.com>
Reviewed-by: Ryan Haasken <haasken@cray.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:36 +0000 (16:37 -0400)]
staging: lustre: cleanup lustre_lib.h
Remove some unused declarations from lustre_lib.h and move
some others to more natural headers.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11500
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:35 +0000 (16:37 -0400)]
staging: lustre: llite: no need to check dentry is NULL
We are already touching dentry in CDEBUG macros so it
will crash long before these checks. Since this is the
case no need to do an additional check.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/10769
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:34 +0000 (16:37 -0400)]
staging: lustre: llite: style cleanup for ll_mkdir
Style cleanup to make the code readable.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/10769
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:33 +0000 (16:37 -0400)]
staging: lustre: llite: turn mode to umode_t for ll_new_inode()
Change int mode to umode_t.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/10769
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:32 +0000 (16:37 -0400)]
staging: lustre: llite: remove mode from ll_create_it()
Remove the unused mode parameter from ll_create_it().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/10769
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:31 +0000 (16:37 -0400)]
staging: lustre: llite: remove lookup_flags from ll_lookup_it()
Remove the effectively unused lookup_flags parameter from
ll_lookup_it().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/10769
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prakash Surya [Sun, 18 Sep 2016 20:37:30 +0000 (16:37 -0400)]
staging: lustre: vvp: Use lockless __generic_file_aio_write
Testing multi-threaded single shard file write performance has shown
the inode mutex to be a limiting factor when using the
generic_file_write_iter function. To work around this bottle neck, this
change replaces the locked version of that call with the lock less
version, specifically, __generic_file_write_iter.
In order to maintain posix consistency, Lustre must now employ it's
own locking mechanism in the higher layers. Currently writes are
protected using the lli_write_mutex in the ll_inode_info structure.
To protect against simultaneous write and truncate operations, since
we no longer take the inode mutex during writes, we must down the
lli_trunc_sem semaphore.
Unfortunately, this change by itself does not garner any performance
benefits. Using FIO on a single machine with 32 GB of RAM, write
performance tests were ran with and without this change applied; the
results are below:
+---------+-----------+---------+--------+--------+
| fio v2.0.13 | Write Bandwidth (KB/s) |
+---------+-----------+---------+--------+--------+
| # Tasks | GB / Task | Test 1 | Test 2 | Test 3 |
+---------+-----------+---------+--------+--------+
| 1 | 64 | 452446 | 454623 | 457653 |
| 2 | 32 | 850318 | 565373 | 602498 |
| 4 | 16 |
1058900 | 463546 | 529107 |
| 8 | 8 |
1026300 | 468190 | 576451 |
| 16 | 4 |
1065500 | 503160 | 462902 |
| 32 | 2 |
1068600 | 462228 | 466963 |
| 64 | 1 | 991830 | 556618 | 557863 |
+---------+-----------+---------+--------+--------+
* Test 1: Lustre client running
04ec54f. File per process write
workload. This test was used as a baseline for what we
_could_ achieve in the single shared file tests if the
bottle necks were removed.
* Test 2: Lustre client running
04ec54f. Single shared file
workload, each task writing to a unique region.
* Test 3: Lustre client running
04ec54f + this patch. Single shared
file workload, each task writing to a unique region.
In order to garner any real performance benefits out of a single
shared file workload, the lli_write_mutex needs to be broken up into a
range lock. That would allow write operations to unique regions of a
file to be executed concurrently. This work is left to be done in a
follow up patch.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1669
Reviewed-on: http://review.whamcloud.com/6672
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prakash Surya [Sun, 18 Sep 2016 20:37:29 +0000 (16:37 -0400)]
staging: lustre: llite: Replace write mutex with range lock
Testing has shown the ll_inode_inode's lli_write_mutex to be a
limiting factor with single shared file write performance, when using
many writing threads on a single machine. Even if each thread is
writing to a unique portion of the file, the lli_write_mutex will
prevent no more than a single thread to ever write to the file
simultaneously.
This change attempts to remove this bottle neck, by replacing this
mutex with a range lock. This should allow multiple threads to write
to a single file simultaneously iff the threads are writing to unique
regions of the file.
Performance testing shows this change to garner a significant
performance boost to write bandwidth. Using FIO on a single machine
with 32 GB of RAM, write performance tests were run with and without
this change applied; the results are below:
+---------+-----------+---------+--------+--------+--------+
| fio v2.0.13 | Write Bandwidth (KB/s) |
+---------+-----------+---------+--------+--------+--------+
| # Tasks | GB / Task | Test 1 | Test 2 | Test 3 | Test 4 |
+---------+-----------+---------+--------+--------+--------+
| 1 | 64 | 452446 | 454623 | 457653 | 463737 |
| 2 | 32 | 850318 | 565373 | 602498 | 733027 |
| 4 | 16 |
1058900 | 463546 | 529107 | 976284 |
| 8 | 8 |
1026300 | 468190 | 576451 | 963404 |
| 16 | 4 |
1065500 | 503160 | 462902 | 830065 |
| 32 | 2 |
1068600 | 462228 | 466963 | 749733 |
| 64 | 1 | 991830 | 556618 | 557863 | 710912 |
+---------+-----------+---------+--------+--------+--------+
* Test 1: Lustre client running
04ec54f. File per process write
workload. This test was used as a baseline for what we
_could_ achieve in the single shared file tests if the
bottle necks were removed.
* Test 2: Lustre client running
04ec54f. Single shared file
workload, each task writing to a unique region.
* Test 3: Lustre client running
04ec54f + I0023132b. Single shared
file workload, each task writing to a unique region.
* Test 4: Lustre client running
04ec54f + this patch.
Single shared file workload, each task writing to a unique
region.
Direct IO does not use the page cache like normal IO, so
concurrent direct IO reads of the same pages are not safe.
As a result, direct IO reads must take the range lock
in ll_file_io_generic, otherwise they will attempt to work
on the same pages and hit assertions like:
(osc_request.c:1219:osc_brw_prep_request())
ASSERTION( i == 0 || pg->off > pg_prev->off ) failed:
i 3 p_c 10 pg
ffffea00017a5208 [pri 0 ind 2771] off 16384
prev_pg
ffffea00017a51d0 [pri 0 ind 2256] off 16384
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Patrick Farrell <paf@cray.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1669
Reviewed-on: http://review.whamcloud.com/6320
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6227
Reviewed-on: http://review.whamcloud.com/14385
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Alexander Boyko <alexander.boyko@seagate.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 18 Sep 2016 20:37:28 +0000 (16:37 -0400)]
staging: lustre: ldlm: restore some of the interval functionality
Earlier a bunch of interval handling got removed since it wasn't
used by the upstream client. Now some of it is needed again for
the client code so this patch restores what is needed.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Fertman [Sun, 18 Sep 2016 20:37:27 +0000 (16:37 -0400)]
staging: lustre: ldlm: resend AST callbacks
While clients will resend client->server RPCs, servers would not
resend server->client RPCs such as LDLM callbacks (blocking
or completion callbacks/ASTs). This could result in clients being
evicted from the server if blocking callbacks were dropped by the
network (a failed router or lossy network) and the client did not
cancel the requested lock in time.
In order to fix this problem, this patch adds the ability to resend
LDLM callbacks from the server and give the client a chance to
respond within the timeout period before it is evicted:
- resend BL AST within lock callback timeout period;
- still do not resend CANCEL_ON_BLOCK;
- regular resend for CP AST without BL AST embedded;
- prolong lock callback timeout on resend;
some fixes:
- recovery-small test_10 to actually evict the client
with dropped BL AST;
- ETIMEDOUT to be returned if send limit is expired;
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5520
Reviewed-by: Alexey Lyashkov <Alexey_Lyashkov@xyratex.com>
Reviewed-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Xyratex-bug-id: MRP-417
Reviewed-on: http://review.whamcloud.com/9335
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Fertman [Sun, 18 Sep 2016 20:37:26 +0000 (16:37 -0400)]
staging: lustre: ldlm: reconstruct proper flags on enqueue resend
otherwise, waiting lock may get granted as no BLOCKED_GRANTED
flag is returned
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Xyratex-bug-id: MRP-1944
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5496
Reviewed-on: http://review.whamcloud.com/11644
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Sun, 18 Sep 2016 20:37:25 +0000 (16:37 -0400)]
staging: lustre: statahead: statahead thread wait for RPCs to finish
Statahead thread should wait for inflight stat RPCs to finish in
case statahead RPC callback may access data allocated in statahead
thread context.
ll_sa_entry_fini() should keep old entry if stat RPC is not
finished yet.
Simplify sai refcounting:
* newly allocated sai will hold one refcount, and it will put it
after starting statahead thread.
* statahead thread holds one refcount.
* agl thread holds one refcount.
* stat process calls do_statahead_enter() which will try to get
sai, and if it's valid, it will revalidate from statahead cache,
and put refcount after use.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3270
Reviewed-on: http://review.whamcloud.com/9663
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 18 Sep 2016 20:37:24 +0000 (16:37 -0400)]
staging: lustre: llite: Compare of unsigned value against 0 is always true
Comparison of unsigned value against 0 is always true.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5200
Reviewed-on: http://review.whamcloud.com/11217
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:23 +0000 (16:37 -0400)]
staging: lustre: remove RCU2HANDLE macro
Remove RCU2HANDLE macro from lustre_handles.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11498
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henri Doreau [Sun, 18 Sep 2016 20:37:22 +0000 (16:37 -0400)]
staging: lustre: mdc: Report D_CHANGELOG messages as D_HSM
Removed the D_CHANGELOG pseudo-debug flag that wasn't actually defined
as a usable one. Report the D_CHANGELOG messages as D_HSM ones instead
since this is the primary user of these messages.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5538
Reviewed-on: http://review.whamcloud.com/11558
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Nunez <james.a.nunez@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Xi [Sun, 18 Sep 2016 20:37:21 +0000 (16:37 -0400)]
staging: lustre: llog: add newly opened llog at tail of handle list
Add newly opened llog handle at the tail of handle list to increase
lookup speed, especially for cancel operation, because the canceled
log will be removed from the list, and lookup is from the beginning.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5405
Reviewed-on: http://review.whamcloud.com/11575
Reviewed-by: Ian Costello <costello.ian@gmail.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Sun, 18 Sep 2016 20:37:20 +0000 (16:37 -0400)]
staging: lustre: build: bump build version warnings to x.y.53
Move the LUSTRE_VERSION_CODE checks to trigger on x.y.53 instead of
x.y.50, so that it is into the development cycle that they are hit
instead of right at the start.
In many cases, the #warning has been removed (to prevent build errors)
and instead the code is just disabled outright. The dead code can be
seen easily and removed in the future with less interruption to the
development process.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4217
Reviewed-on: http://review.whamcloud.com/8630
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Tested-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:19 +0000 (16:37 -0400)]
staging: lustre: lmv: release request in lmv_revalidate_slaves()
In lmv_revalidate_slaves() ensure that the request returned by
md_intent_lock() is properly released on all paths.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5452
Reviewed-on: http://review.whamcloud.com/11326
Reviewed-by: wang di <di.wang@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Shilong [Sun, 18 Sep 2016 20:37:18 +0000 (16:37 -0400)]
staging: lustre: ptlrpc: fix magic return value of ptlrpc_init_portals
Previously, when running 'modprobe lustre', it hit the following
error message which is becaue of network initialisation failure:
modprobe: ERROR: could not insert 'lustre': Input/output error
However, error code is there, just let it return to caller,
after this patch, error message will be something like:
modprobe: ERROR: could not insert 'lustre': Network is down
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5455
Reviewed-on: http://review.whamcloud.com/11337
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 18 Sep 2016 20:37:17 +0000 (16:37 -0400)]
staging: lustre: obdclass: fix comparison between signed and unsigned
Make lu_buf->lb_len unsigned.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5417
Reviewed-on: http://review.whamcloud.com/11281
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sun, 18 Sep 2016 20:37:16 +0000 (16:37 -0400)]
staging: lustre: lov: adjust page bufsize after layout change
Otherwise, the coh_page_bufsize keeps increasing when the file's
layout keeps changing in lov_init_raid0().
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5459
Reviewed-on: http://review.whamcloud.com/11394
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 18 Sep 2016 20:37:15 +0000 (16:37 -0400)]
staging: lustre: fix comparison between signed and unsigned
Cleanup in general headers.
* use size_t in cfs_size_round*()
* make unsigned index and len in lustre_cfg_*()
* make iteration variable the same type as comparing value
* make unsigned pages counters
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5417
Reviewed-on: http://review.whamcloud.com/11327
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sun, 18 Sep 2016 20:37:14 +0000 (16:37 -0400)]
staging: lustre: clio: lu_ref_del() mismatch ref add scope
'commit
77605e41a26f ("staging/lustre/clio: add pages into writeback cache
in batches")' adds a page to a list aggregate issuing them to writeback
cache; A page add is referenced in llite/vvp io scope, while writeback
cache commit de-refers it under osc sub io scope, and enabling -lu_ref
will detect this scope mismatch.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4503
Reviewed-on: http://review.whamcloud.com/8970
Reviewed-by: frank zago <fzago@cray.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:13 +0000 (16:37 -0400)]
staging: lustre: lmv: release locks if lmv_intent_lock() fails
In lmv_intent_lock() if we will return an error then first release any
locks referenced by the intent.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5431
Reviewed-on: http://review.whamcloud.com/11319
Reviewed-by: wang di <di.wang@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sun, 18 Sep 2016 20:37:12 +0000 (16:37 -0400)]
staging: lustre: osc: update kms in brw_interpret() properly
In brw_interpret(), we forgot page offset when calculating
write offset, that leads to wrong kms for sync write.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5463
Reviewed-on: http://review.whamcloud.com/11374
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Li Dongyang <dongyang.li@anu.edu.au>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:11 +0000 (16:37 -0400)]
staging: lustre: lmv: fix some byte order issues
In the handler for LL_IOC_LMV_GETSTRIPE convert stripe FIDs from
little to CPU endian when unpacking lmv_user_md. In lmv_unpack_md_v1()
fix a double conversion of the stripe count.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5342
Reviewed-on: http://review.whamcloud.com/11106
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sun, 18 Sep 2016 20:37:10 +0000 (16:37 -0400)]
staging: lustre: llite: update ras stride offset
When a read ahead does not reach the end of the region reserved from
ras, we'd set ras::ras_next_readahead back to where we left off; For
stride read ahead, it needs to make sure that the offset is no less
than ras_stride_offset, so that the stride read ahead can work
correctly.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5263
Reviewed-on: http://review.whamcloud.com/11181
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: wang di <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:09 +0000 (16:37 -0400)]
staging: lustre: llite: add LL_LEASE_{RD,WR,UN}LCK
Define new constants LL_LEASE_{RD,WR,UN}LCK for use as the argument to
and return value from the LL_IOC_{GET,SET}_LEASE ioctls. As arguments,
these contants replace the use of F_{RD,WR,UN}LCK from fcntl.h. As
return values they replace the use of FMODE_{READ,WRITE} which are
internal to the Linux kernel source and not under the control of the
Lustre ioctl interface.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5013
Reviewed-on: http://review.whamcloud.com/10233
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sun, 18 Sep 2016 20:37:08 +0000 (16:37 -0400)]
staging: lustre: obdclass: serialize lu_site purge
Umount process relies on lu_site_purge(-1) to purge all
objects before umount, however, if there happen to have a
cache shrinker which calls lu_site_purge(nr) in parallel,
some objects may still being freed by cache shrinker even
after the lu_site_purge(-1) called by umount done.
This can be simply fixed by serializing purge threads,
since it doesn't make any sense to have them in parallel.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5331
Reviewed-on: http://review.whamcloud.com/11099
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:07 +0000 (16:37 -0400)]
staging: lustre: obd: add rnb_ prefix to struct niobuf_remote members
Add the prefix rnb_ to the members of struct niobuf_remote. Delete the
relevant compat macros from ofd_internal.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5061
Reviewed-on: http://review.whamcloud.com/10452
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:06 +0000 (16:37 -0400)]
staging: lustre: obd: add lnb_ prefix to members of struct niobuf_local
Add the prefix lnb_ to the members of struct niobuf_local that do not
already have it. Change the struct dentry *lnb_dentry member to void
*lnb_data as it is not used to hold a pointer to struct dentry.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5061
Reviewed-on: http://review.whamcloud.com/10451
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Sun, 18 Sep 2016 20:37:05 +0000 (16:37 -0400)]
staging: lustre: lmv: Do not ignore ENOENT in lmv_unlink
Return correct value (rc) in lmv_unlink. In lmv_unlink,
-ENOENT might be ingored for local directory unlink.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5371
Reviewed-on: http://review.whamcloud.com/11170
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Zarochentsev [Sun, 18 Sep 2016 20:37:04 +0000 (16:37 -0400)]
staging: lustre: obdclass: optimize busy loop wait
two optimizations in the busy loop wait in class_cleanup():
(1) remove unnecessary spinlocks protecting obd_conn_inprogress
access
(2) replace cond_resched by more suitable yield to unconditionally
yield the CPU if the condition check fails.
Signed-off-by: Alexander Zarochentsev <alexander_zarochentsev@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5397
Xyratex-bug-id: MRP-1991
Reviewed-on: http://review.whamcloud.com/11198
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Sun, 18 Sep 2016 20:37:03 +0000 (16:37 -0400)]
staging: lustre: lmv: honor MDT index when creating volatile file
LMV should honor MDT index embedded in the name of volatile
file, then during hsm restore, the file under striped dir can
be restored to the right MDT.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4691
Reviewed-on: http://review.whamcloud.com/10866
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Henri Doreau <henri.doreau@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 18 Sep 2016 20:37:02 +0000 (16:37 -0400)]
staging: lustre: ldlm: fix a use after free in ldlm_resource_get()
If lvbo initialization has failed then save the return status (from
lr_lvb_len) before putting the resource.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5305
Reviewed-on: http://review.whamcloud.com/11017
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Xi [Sun, 18 Sep 2016 20:37:01 +0000 (16:37 -0400)]
staging: lustre: ptlrpc: enlarge OST_MAXREQSIZE for 4MB RPC
This patch enlarges OST_MAXREQSIZE so as to make the
request size large enough for 4MB RPC.
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4755
Reviewed-on: http://review.whamcloud.com/9599
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Xi [Sun, 18 Sep 2016 20:37:00 +0000 (16:37 -0400)]
staging: lustre: llite: fix ll_statahead_thread() problems on failure
When ll_prep_md_op_data() fails, ll_statahead_thread() does not
release reference of sai and parent dentry. It does not wake
up parent thread either. This patch fixes these problems.
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5274
Reviewed-on: http://review.whamcloud.com/10940
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 18 Sep 2016 11:09:50 +0000 (13:09 +0200)]
Revert "staging: olpc_dcon: Replace a bit shift by a use of BIT."
This reverts commit
ed88363e6aebb91df820e1a8898d2a07b18d2bc9.
It was incorrect :(
Cc: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namrata A Shettar [Sun, 18 Sep 2016 09:04:51 +0000 (14:34 +0530)]
staging: vt6655: device_main: Replace NULL comparison with !x
Replace NULL comparison to resolve checkpatch issue.
- x == NULL => !x
Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namrata A Shettar [Sun, 18 Sep 2016 09:05:13 +0000 (14:35 +0530)]
staging: vt6655: device_main: Replace explicit NULL comparison
Replace NULL comparison to resolve checkpatch issue.
- x == NULL => !x
Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 18 Sep 2016 09:41:14 +0000 (15:11 +0530)]
staging: wlan-ng: Remove the typedef to the 'wlandevice' structure
This patch removes the typedef 'wlandevice_t' to the 'wlandevice'
structure.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Sat, 17 Sep 2016 23:25:26 +0000 (04:55 +0530)]
Staging: ks7010: Drop memory allocation cast.
Drop cast on the result of kzalloc.
The semantic patch that makes this change is as follows:
@@
type T;
@@
- (T *)
(\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...))
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Sat, 17 Sep 2016 23:11:39 +0000 (04:41 +0530)]
Staging: fbtft: Use !x instead of x == NULL.
Use !x instead of x == NULL. This patch was found by checkpatch.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Sat, 17 Sep 2016 22:59:54 +0000 (04:29 +0530)]
Staging: lustre: lmv_obd: Remove redundant if-statement.
Remove redundant if-statement.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandhya Bankar [Sat, 17 Sep 2016 22:48:22 +0000 (04:18 +0530)]
Staging: rtl8192e: Use !x instead of x == NULL
Use !x instead of x == NULL. This patch was found by checkpatch.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sun, 18 Sep 2016 09:05:59 +0000 (14:35 +0530)]
Staging: xgifb: Compress return logic
This patch compresses the return logic into a single statement
and removes the now unused return variable.
Done using coccinelle:
@@
type T;
identifier r;
@@
- T r;
... when !=r
- r =
+ return
...;
- return r;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namrata A Shettar [Sun, 18 Sep 2016 08:16:01 +0000 (13:46 +0530)]
staging: xgifb: Replace explicit NULL comparison
Replace explicit NULL comparison with equivalent expression to resolve
checkpatch issue.
- x != NULL => x
Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anchal Jain [Sun, 18 Sep 2016 07:51:20 +0000 (13:21 +0530)]
staging: rtl8188eu: core: Add spaces around operators
Add spaces around operators {+, -, &, /, <<, &&}
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anchal Jain [Sun, 18 Sep 2016 07:48:56 +0000 (13:18 +0530)]
staging: rtl8188eu: core: Fix comparison to NULL
Convert pointer comparisons to NULL to NULL pointer 'p'
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 18 Sep 2016 07:26:25 +0000 (12:56 +0530)]
staging: ks7010: Remove extra round braces around expressions/variables
This patch removes excess round braces around expressions/variables.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 18 Sep 2016 07:25:32 +0000 (12:55 +0530)]
staging: ks7010: Remove the space after a type cast
The patch removes an unnecessary space after a cast, as detected by
checkpatch.pl.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 18 Sep 2016 07:24:43 +0000 (12:54 +0530)]
staging: ks7010: Remove unnecessary blank lines and commented code
The patch removes unnecessary blank lines as detected by checkpatch.pl. Also,
it removes a commented line of unrequired code.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 18 Sep 2016 07:23:49 +0000 (12:53 +0530)]
staging: ks7010: Remove space after '(' and before ')'
The patch fixes the following errors detected by checkpatch.pl:
ERROR: space prohibited before that close parenthesis ')'
ERROR: space prohibited after that open parenthesis '('
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 18 Sep 2016 07:22:27 +0000 (12:52 +0530)]
staging: ks7010: Remove braces following single statement blocks
The patch removes braces {} for single statement blocks, as suggested by
checkpatch.pl.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 18 Sep 2016 07:21:03 +0000 (12:51 +0530)]
staging: ks7010: Use #include <linux/atomic.h> instead of <asm/atomic.h>
This patch replaces <asm/atomic.h> with <linux/atomic.h>, as suggested
by checkpatch.pl.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cathal Mullaney [Sat, 17 Sep 2016 23:04:42 +0000 (00:04 +0100)]
Staging: octeon: ethernet-rx: fixed three redundant blank line style issues
Fixed three minor coding style issues.
Signed-off-by: Cathal Mullaney <chuckleberryfinn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Eyolfson [Sat, 17 Sep 2016 23:49:55 +0000 (19:49 -0400)]
staging: wlan-ng: if statement style cleanup
Changed if statement bodies from 2 levels deeper than if statement to 1.
Signed-off-by: Jon Eyolfson <jon@eyl.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anchal Jain [Sun, 18 Sep 2016 06:46:40 +0000 (12:16 +0530)]
staging: olpc_dcon: Replace a bit shift by a use of BIT.
This patch replaces bit shifting on 1 with the BIT(x) macro
as it's extensively used by other function in the file olpc_dcon.h .
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cathal Mullaney [Sat, 17 Sep 2016 19:01:08 +0000 (20:01 +0100)]
Staging: dgnc: dgnc_tty: fixed a line too long style issue
Fixed a coding style issue.
Signed-off-by: Cathal Mullaney <chuckleberryfinn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namrata A Shettar [Fri, 16 Sep 2016 21:05:21 +0000 (02:35 +0530)]
staging: rtl8712: Rename misspelt macro
Correct the word 'success' being misspelt in the macro:
- LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA => LED_BLINK_WPS_SUCCESS_INTERVAL_ALPHA
Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sat, 17 Sep 2016 16:35:19 +0000 (22:05 +0530)]
staging: rtl8188eu: core: Replace memcpy() with ether_addr_copy() if ethernet addresses are __aligned(2)
This patch fixes the checkpatch warning:
Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are
__aligned(2)
Done using coccinelle:
@@
expression exp1, exp2;
@@
- memcpy(exp1, exp2, ETH_ALEN);
+ ether_addr_copy(exp1, exp2);
The output of pahole shows that the addresses are aligned:
struct ieee80211_hdr {
__le16 frame_control; /* 0 2 */
__le16 duration_id; /* 2 2 */
u8 addr1[6]; /* 4 6 */
u8 addr2[6]; /* 10 6 */
u8 addr3[6]; /* 16 6 */
__le16 seq_ctrl; /* 22 2 */
u8 addr4[6]; /* 24 6 */
/* size: 30, cachelines: 1, members: 7 */
/* last cacheline: 30 bytes */
};
struct wlan_bssid_ex {
u32 Length; /* 0 4 */
unsigned char MacAddress[6]; /* 4 6 */
u8 Reserved[2]; /* 10 2 */
struct ndis_802_11_ssid Ssid; /* 12 36 */
u32 Privacy; /* 48 4 */
long int Rssi; /* 52 8 */
enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; /* 60 4 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct ndis_802_11_config Configuration; /* 64 32 */
enum ndis_802_11_network_infra InfrastructureMode; /* 96 4 */
unsigned char SupportedRates[16]; /* 100 16 */
struct wlan_phy_info PhyInfo; /* 116 4 */
u32 IELength; /* 120 4 */
u8 IEs[768]; /* 124 768 */
/* --- cacheline 13 boundary (832 bytes) was 60 bytes ago --- */
/* size: 892, cachelines: 14, members: 13 */
/* last cacheline: 60 bytes */
};
struct stadel_event {
unsigned char macaddr[6]; /* 0 6 */
unsigned char rsvd[2]; /* 6 2 */
int mac_id; /* 8 4 */
/* size: 12, cachelines: 1, members: 3 */
/* last cacheline: 12 bytes */
};
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Kanner [Fri, 16 Sep 2016 22:28:13 +0000 (01:28 +0300)]
drivers: staging: vme: convert to octal notation for permission bits
Ran checkpatch.pl -f vme_pio2_core.c
Fixed: WARNING: Symbolic permissions are not preferred. Consider using
octal permissions (0444)
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Fri, 16 Sep 2016 20:33:45 +0000 (02:03 +0530)]
staging: olpc_dcon: Replace u_int8_t with u8
This patch replaces type u_int8_t with u8 as suggested by checkpatch.pl.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Fri, 16 Sep 2016 17:59:30 +0000 (23:29 +0530)]
staging: media: davinci_vpfe: Replace explicit NULL comparison with ! operator
This patch replaces the explicit NULL comparisons with ! operator.
It was found using Coccinelle:
@disable is_null@
expression e;
@@
- e == NULL
+ !e
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Fri, 16 Sep 2016 18:44:57 +0000 (00:14 +0530)]
staging: media: davinci_vpfe: Use BIT macro instead of left shifting 1
This patch replaces left shifts on 1 with the BIT(x) macro, as suggested
by checkpatch.pl.
This was done using coccinelle script:
@@
constant c;
@@
- (1 << c)
+ BIT(c)
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sat, 17 Sep 2016 07:39:13 +0000 (13:09 +0530)]
Staging: ks7010: Remove extern keyword from function declaration
Remove extern specifier from function declaration as they have
it by default. Also move extern declaration from .c files to
their respective header file 'ks_hostif.h'. Coccinelle was used
to remove extern and other changes were done by hand.
Script:
@@
identifier func;
type T;
@@
- extern
T func(...);
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namrata A Shettar [Sat, 17 Sep 2016 12:26:59 +0000 (17:56 +0530)]
staging: rts5208: rtsx_chip: Add space around binary operators
Add space around binary operators to resolve checkpatch issue.
Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baoyou Xie [Sat, 17 Sep 2016 12:04:36 +0000 (20:04 +0800)]
staging: lustre: lmv: mark symbols static where possible
We get a few warnings when building kernel with W=1:
drivers/staging/lustre/lustre/lmv/lmv_obd.c:1640:1: warning: no previous prototype for 'lmv_locate_target_for_name' [-Wmissing-prototypes]
drivers/staging/lustre/lustre/lmv/lmv_obd.c:2421:5: warning: no previous prototype for 'lmv_read_page' [-Wmissing-prototypes]
....
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baoyou Xie [Sat, 17 Sep 2016 13:24:08 +0000 (21:24 +0800)]
staging/lustre: clean function declaration in cl_io.c up
We get 1 warning when building kernel with W=1:
drivers/staging/lustre/lustre/obdclass/cl_page.c:488:6: warning: no previous prototype for 'cl_page_disown0' [-Wmissing-prototypes]
In fact, this function is declared in
drivers/staging/lustre/lustre/obdclass/cl_io.c, but should be
removed in a header file. thus can be recognized in other file.
So this patch moves the declaration into
drivers/staging/lustre/lustre/include/cl_object.h.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baoyou Xie [Sat, 17 Sep 2016 13:30:35 +0000 (21:30 +0800)]
staging: lustre: obdclass: clean function declarations in obd_config.c and class_obd.c up
We get 3 warnings when building kernel with W=1:
drivers/staging/lustre/lustre/obdclass/obd_mount.c:705:5: warning: no previous prototype for 'lustre_check_exclusion' [-Wmissing-prototypes]
drivers/staging/lustre/lustre/obdclass/obd_mount.c:1226:5: warning: no previous prototype for 'lustre_register_fs' [-Wmissing-prototypes]
drivers/staging/lustre/lustre/obdclass/obd_mount.c:1231:5: warning: no previous prototype for 'lustre_unregister_fs' [-Wmissing-prototypes]
In fact, the first function is declared in
drivers/staging/lustre/lustre/obdclass/obd_config.c,
and the other two functions are declared in
drivers/staging/lustre/lustre/obdclass/class_obd.c,
but all of these functions should be declared in
a header file, thus can be recognized in other file.
So this patch moves the declarations into
drivers/staging/lustre/lustre/include/obd_class.h.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baoyou Xie [Sat, 17 Sep 2016 13:37:03 +0000 (21:37 +0800)]
staging/lustre: clean function declaration in super25.c up
We get 1 warning when building kernel with W=1:
drivers/staging/lustre/lustre/obdclass/obd_config.c:719:6: warning: no previous prototype for 'lustre_register_client_process_config' [-Wmissing-prototypes]
In fact, this function is declared in
drivers/staging/lustre/lustre/llite/super25.c, but should be
moved into a header file, thus can be recognized in other file.
So this patch moves the declaration into
drivers/staging/lustre/lustre/include/lprocfs_status.h.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baoyou Xie [Sat, 17 Sep 2016 13:41:39 +0000 (21:41 +0800)]
staging: lustre: clean function declaration in super25.c up
We get 1 warning when building kernel with W=1:
drivers/staging/lustre/lnet/selftest/conctl.c:804:1: warning: no previous prototype for 'lstcon_ioctl_entry' [-Wmissing-prototypes]
In fact, this function is declared in
drivers/staging/lustre/lustre/llite/super25.c, but should be
moved into a header file, thus can be recognized in other file.
So this patch moves the declaration into
drivers/staging/lustre/lnet/selftest/console.h
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Groux [Fri, 16 Sep 2016 15:51:02 +0000 (17:51 +0200)]
staging: lustre: include/lustre_net.h: Remove unnecessary space before function pointer arguments.
Minor warnings spotted by checkpatch.pl in lustre
Remove unnecessary space before function pointer arguments.
Signed-off-by: Richard Groux <rgroux@sauron-mordor.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Fri, 16 Sep 2016 14:24:37 +0000 (19:54 +0530)]
Staging: ks7010: Replace memset with eth_zero_addr
Use eth_zero_addr to assign zero address to the given address array
instead of memset when the second argument in memset is address
of zero. Coccinelle was used to do the replacement and add the
header file linux/etherdevice.h if not already present.
Script:
@header@
@@
#include <linux/etherdevice.h>
@r1@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@includeheader depends on r1 && !header@
@@
+ #include <linux/etherdevice.h>
#include <...>
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Fri, 16 Sep 2016 10:53:02 +0000 (16:23 +0530)]
staging: wilc1000: Use sizeof type *pointer instead of sizeof type
The patch uses the size of the dereference to a variable instead of it's type,
to make the code more resistant to type changes in the future. The type of the
pointer variable here is the same as the type in the argument that is being
replaced in sizeof().
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Fri, 16 Sep 2016 14:34:12 +0000 (21:34 +0700)]
staging: r8188eu: remove ODM_CmnInfoPtrArrayHook function
This function used once, and does not improve code readability.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / openwrt / staging / blogic.git / log