Joonsoo Kim [Thu, 13 Nov 2014 23:19:21 +0000 (15:19 -0800)]
mm/page_alloc: restrict max order of merging on isolated pageblock
Current pageblock isolation logic could isolate each pageblock
individually. This causes freepage accounting problem if freepage with
pageblock order on isolate pageblock is merged with other freepage on
normal pageblock. We can prevent merging by restricting max order of
merging to pageblock order if freepage is on isolate pageblock.
A side-effect of this change is that there could be non-merged buddy
freepage even if finishing pageblock isolation, because undoing
pageblock isolation is just to move freepage from isolate buddy list to
normal buddy list rather than to consider merging. So, the patch also
makes undoing pageblock isolation consider freepage merge. When
un-isolation, freepage with more than pageblock order and it's buddy are
checked. If they are on normal pageblock, instead of just moving, we
isolate the freepage and free it in order to get merged.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Heesub Shin <heesub.shin@samsung.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Ritesh Harjani <ritesh.list@gmail.com>
Cc: Gioh Kim <gioh.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Thu, 13 Nov 2014 23:19:18 +0000 (15:19 -0800)]
mm/page_alloc: move freepage counting logic to __free_one_page()
All the caller of __free_one_page() has similar freepage counting logic,
so we can move it to __free_one_page(). This reduce line of code and
help future maintenance.
This is also preparation step for "mm/page_alloc: restrict max order of
merging on isolated pageblock" which fix the freepage counting problem
on freepage with more than pageblock order.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Heesub Shin <heesub.shin@samsung.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Ritesh Harjani <ritesh.list@gmail.com>
Cc: Gioh Kim <gioh.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Thu, 13 Nov 2014 23:19:14 +0000 (15:19 -0800)]
mm/page_alloc: add freepage on isolate pageblock to correct buddy list
In free_pcppages_bulk(), we use cached migratetype of freepage to
determine type of buddy list where freepage will be added. This
information is stored when freepage is added to pcp list, so if
isolation of pageblock of this freepage begins after storing, this
cached information could be stale. In other words, it has original
migratetype rather than MIGRATE_ISOLATE.
There are two problems caused by this stale information.
One is that we can't keep these freepages from being allocated.
Although this pageblock is isolated, freepage will be added to normal
buddy list so that it could be allocated without any restriction. And
the other problem is incorrect freepage accounting. Freepages on
isolate pageblock should not be counted for number of freepage.
Following is the code snippet in free_pcppages_bulk().
/* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
__free_one_page(page, page_to_pfn(page), zone, 0, mt);
trace_mm_page_pcpu_drain(page, 0, mt);
if (likely(!is_migrate_isolate_page(page))) {
__mod_zone_page_state(zone, NR_FREE_PAGES, 1);
if (is_migrate_cma(mt))
__mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1);
}
As you can see above snippet, current code already handle second
problem, incorrect freepage accounting, by re-fetching pageblock
migratetype through is_migrate_isolate_page(page).
But, because this re-fetched information isn't used for
__free_one_page(), first problem would not be solved. This patch try to
solve this situation to re-fetch pageblock migratetype before
__free_one_page() and to use it for __free_one_page().
In addition to move up position of this re-fetch, this patch use
optimization technique, re-fetching migratetype only if there is isolate
pageblock. Pageblock isolation is rare event, so we can avoid
re-fetching in common case with this optimization.
This patch also correct migratetype of the tracepoint output.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Heesub Shin <heesub.shin@samsung.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Ritesh Harjani <ritesh.list@gmail.com>
Cc: Gioh Kim <gioh.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Thu, 13 Nov 2014 23:19:11 +0000 (15:19 -0800)]
mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype
Before describing bugs itself, I first explain definition of freepage.
1. pages on buddy list are counted as freepage.
2. pages on isolate migratetype buddy list are *not* counted as freepage.
3. pages on cma buddy list are counted as CMA freepage, too.
Now, I describe problems and related patch.
Patch 1: There is race conditions on getting pageblock migratetype that
it results in misplacement of freepages on buddy list, incorrect
freepage count and un-availability of freepage.
Patch 2: Freepages on pcp list could have stale cached information to
determine migratetype of buddy list to go. This causes misplacement of
freepages on buddy list and incorrect freepage count.
Patch 4: Merging between freepages on different migratetype of
pageblocks will cause freepages accouting problem. This patch fixes it.
Without patchset [3], above problem doesn't happens on my CMA allocation
test, because CMA reserved pages aren't used at all. So there is no
chance for above race.
With patchset [3], I did simple CMA allocation test and get below
result:
- Virtual machine, 4 cpus, 1024 MB memory, 256 MB CMA reservation
- run kernel build (make -j16) on background
- 30 times CMA allocation(8MB * 30 = 240MB) attempts in 5 sec interval
- Result: more than 5000 freepage count are missed
With patchset [3] and this patchset, I found that no freepage count are
missed so that I conclude that problems are solved.
On my simple memory offlining test, these problems also occur on that
environment, too.
This patch (of 4):
There are two paths to reach core free function of buddy allocator,
__free_one_page(), one is free_one_page()->__free_one_page() and the
other is free_hot_cold_page()->free_pcppages_bulk()->__free_one_page().
Each paths has race condition causing serious problems. At first, this
patch is focused on first type of freepath. And then, following patch
will solve the problem in second type of freepath.
In the first type of freepath, we got migratetype of freeing page
without holding the zone lock, so it could be racy. There are two cases
of this race.
1. pages are added to isolate buddy list after restoring orignal
migratetype
CPU1 CPU2
get migratetype => return MIGRATE_ISOLATE
call free_one_page() with MIGRATE_ISOLATE
grab the zone lock
unisolate pageblock
release the zone lock
grab the zone lock
call __free_one_page() with MIGRATE_ISOLATE
freepage go into isolate buddy list,
although pageblock is already unisolated
This may cause two problems. One is that we can't use this page anymore
until next isolation attempt of this pageblock, because freepage is on
isolate buddy list. The other is that freepage accouting could be wrong
due to merging between different buddy list. Freepages on isolate buddy
list aren't counted as freepage, but ones on normal buddy list are
counted as freepage. If merge happens, buddy freepage on normal buddy
list is inevitably moved to isolate buddy list without any consideration
of freepage accouting so it could be incorrect.
2. pages are added to normal buddy list while pageblock is isolated.
It is similar with above case.
This also may cause two problems. One is that we can't keep these
freepages from being allocated. Although this pageblock is isolated,
freepage would be added to normal buddy list so that it could be
allocated without any restriction. And the other problem is same as
case 1, that it, incorrect freepage accouting.
This race condition would be prevented by checking migratetype again
with holding the zone lock. Because it is somewhat heavy operation and
it isn't needed in common case, we want to avoid rechecking as much as
possible. So this patch introduce new variable, nr_isolate_pageblock in
struct zone to check if there is isolated pageblock. With this, we can
avoid to re-check migratetype in common case and do it only if there is
isolated pageblock or migratetype is MIGRATE_ISOLATE. This solve above
mentioned problems.
Changes from v3:
Add one more check in free_one_page() that checks whether migratetype is
MIGRATE_ISOLATE or not. Without this, abovementioned case 1 could happens.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Heesub Shin <heesub.shin@samsung.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Ritesh Harjani <ritesh.list@gmail.com>
Cc: Gioh Kim <gioh.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Thu, 13 Nov 2014 23:19:07 +0000 (15:19 -0800)]
mm/compaction: skip the range until proper target pageblock is met
Commit
7d49d8868336 ("mm, compaction: reduce zone checking frequency in
the migration scanner") has a side-effect that changes the iteration
range calculation. Before the change, block_end_pfn is calculated using
start_pfn, but now it blindly adds pageblock_nr_pages to the previous
value.
This causes the problem that isolation_start_pfn is larger than
block_end_pfn when we isolate the page with more than pageblock order.
In this case, isolation would fail due to an invalid range parameter.
To prevent this, this patch implements skipping the range until a proper
target pageblock is met. Without this patch, CMA with more than
pageblock order always fails but with this patch it will succeed.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Weijie Yang [Thu, 13 Nov 2014 23:19:05 +0000 (15:19 -0800)]
zram: avoid kunmap_atomic() of a NULL pointer
zram could kunmap_atomic() a NULL pointer in a rare situation: a zram
page becomes a full-zeroed page after a partial write io. The current
code doesn't handle this case and performs kunmap_atomic() on a NULL
pointer, which panics the kernel.
This patch fixes this issue.
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Weijie Yang <weijie.yang.kh@gmail.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 13 Nov 2014 17:46:15 +0000 (09:46 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull SELinux fixlet from James Morris:
"WARN_ONCE() here will unnecessarily terrify users"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: convert WARN_ONCE() to printk() in selinux_nlmsg_perm()
Linus Torvalds [Thu, 13 Nov 2014 17:36:39 +0000 (09:36 -0800)]
Merge branch 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit
Pull audit fixes from Paul Moore:
"After he sent the initial audit pull request for 3.18, Eric asked me
to take over the management of the audit tree, hence this pull request
to fix a couple of problems with audit.
As you can see below, the changes are minimal: adding some whitespace
to a string so userspace parses it correctly, and fixing a problem
with audit's usage of fsnotify that was causing audit watch rules to
be lost. Neither of these patches were very controversial on the
mailing lists and they fix real problems, getting them into 3.18 would
be a good thing"
* 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit:
audit: keep inode pinned
audit: AUDIT_FEATURE_CHANGE message format missing delimiting space
Linus Torvalds [Thu, 13 Nov 2014 17:19:20 +0000 (09:19 -0800)]
Merge tag 'dm-3.18-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- stable fix for dm-thin that avoids normal IO racing with discard
- stable fix for a dm-cache related bug in dm-btree walking code that
results from using very large fast device (eg 4T) with a very small
cache blocksize (eg 32K) -- this is a very uncommon configuration
- a couple fixes for dm-raid (one for stable and the other addresses a
crash in 3.18-rc1 code)
- stable fix for dm-thinp that addresses a very rare dm-bufio bug
having to do with memory reclaimation (via shrinker) when using
dm-thinp ontop of loopback devices
- fix a leak in dm-stripe target constructor's error path
* tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm btree: fix a recursion depth bug in btree walking code
dm thin: grab a virtual cell before looking up the mapping
dm raid: fix inaccessible superblocks causing oops in configure_discard_support
dm raid: ensure superblock's size matches device's logical block size
dm bufio: change __GFP_IO to __GFP_FS in shrinker callbacks
dm stripe: fix potential for leak in stripe_ctr error path
James Morris [Thu, 13 Nov 2014 10:49:53 +0000 (21:49 +1100)]
Merge branch 'stable-3.18' of git://git.infradead.org/users/pcmoore/selinux into for-linus
Linus Torvalds [Wed, 12 Nov 2014 23:29:28 +0000 (15:29 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two fixes --- one of them not exactly a one liner, but things are
calming down on the KVM front at last"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix uninitialized op->type for some immediate values
KVM: s390: virtio_ccw: remove unused variable
Linus Torvalds [Wed, 12 Nov 2014 23:21:52 +0000 (15:21 -0800)]
Merge tag 'xtensa-
20141109' of git://github.com/czankel/xtensa-linux
Pull Xtensa fixes from Chris Zankel:
- fix umount syscall
- fix ISS and xtfpga Kconfig dependencies so that more randconfigs are
buildable
- add seccomp, getrandom, and memfd_create syscalls
- add defconfigs for KC705 and SMP LX200
- implement pgprot_noncached
* tag 'xtensa-
20141109' of git://github.com/czankel/xtensa-linux:
xtensa: xtfpga: add lx200 SMP DTS and defconfig
xtensa: xtfpga: add generic KC705 board config
xtensa: re-wire umount syscall to sys_oldumount
xtensa: xtfpga: only select ethoc when ethernet is available
xtensa: add seccomp, getrandom, and memfd_create syscalls
xtensa: ISS: add BLOCK dependency to BLK_DEV_SIMDISK
xtensa: implement pgprot_noncached
xtensa/uapi: Add definition of TIOC[SG]RS485
Linus Torvalds [Wed, 12 Nov 2014 22:19:47 +0000 (14:19 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- stack corruption fix for pseries hwrng driver
- add missing DMA unmap in caam crypto driver
- fix NUMA crash in qat crypto driver
- fix buggy mapping of zero-length associated data in qat crypto driver
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: pseries - port to new read API and fix stack corruption
crypto: caam - fix missing dma unmap on error path
crypto: qat - Enforce valid numa configuration
crypto: qat - Prevent dma mapping zero length assoc data
Linus Torvalds [Wed, 12 Nov 2014 22:02:29 +0000 (14:02 -0800)]
Merge tag 'trace-fixes-v3.18-rc4' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Rabin Vincent found a way that tracing could cause an infinite loop in
the kernel. The splice logic wants a full page from the ring buffer
but the ring_buffer_wait() returns when there's any data in the ring
buffer. The splice code would then continue the loop waiting for a
full page. But if a full page never happens, the splice code will
never sleep and just continue to loop.
There's another case that Rabin fixed that could loop if there's no
memory and kmalloc() constantly returns NULL"
* tag 'trace-fixes-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not risk busy looping in buffer splice
tracing: Do not busy wait in buffer splice
Linus Torvalds [Wed, 12 Nov 2014 21:53:55 +0000 (13:53 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux
Pull kernel argument parsing fix from Rusty Russell:
"Nasty, stupid bug, and I've suddenly had two reports"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
param: fix crash on bad kernel arguments
Linus Torvalds [Wed, 12 Nov 2014 21:18:20 +0000 (13:18 -0800)]
Merge tag 'hwmon-for-linus-v3.18-rc5' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- fix PCI device ID in fam15h_power driver
- fix suspend/resume behavior in pwm-fan driver
- reduce logging noise created by ibmpowernv driver
* tag 'hwmon-for-linus-v3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (fam15h_power) Fix NB device ID for F16h M30h
hwmon: (pwm-fan) Fix suspend/resume behavior
hwmon: (ibmpowernv) Quieten when probing finds no device
Linus Torvalds [Wed, 12 Nov 2014 21:15:18 +0000 (13:15 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal driver fixes from Eduardo Valentin:
"This week we have few fixes:
- fix in IMX thermal driver to do the correct loading sequence with
CPUfreq
- fix in Exynos related to TMU_CONTROL offset in Exynos5260
- fix the unit conversion in int3403"
[ Still pulling from Eduardo as Rui Zhang is on a business trip and has
troubles with his machine ]
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
imx: thermal: imx_get_temp might be called before sensor clock is prepared
thermal: exynos: use correct offset for TMU_CONTROL register on Exynos5260
thermal: imx: correct driver load sequence for cpu cooling
Thermal/int3403: Fix thermal hysteresis unit conversion
Richard Guy Briggs [Wed, 12 Nov 2014 19:01:34 +0000 (14:01 -0500)]
selinux: convert WARN_ONCE() to printk() in selinux_nlmsg_perm()
Convert WARN_ONCE() to printk() in selinux_nlmsg_perm().
After conversion from audit_log() in commit
e173fb26, WARN_ONCE() was
deemed too alarmist, so switch it to printk().
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: Changed to printk(WARNING) so we catch all of the different
invalid netlink messages. In Richard's defense, he brought this
point up earlier, but I didn't understand his point at the time.]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Linus Torvalds [Wed, 12 Nov 2014 21:13:24 +0000 (13:13 -0800)]
Merge tag 'mfd-fixes-3.18' of git://git./linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
- register offset fix for stmpe
- eradicate build warning when !PM in rtsx_pcr
- fix device ID collision when multiple boards are connected in
viperboard
- use correct Regmap handle - fixing unhanded IRQs in max77693
- unmask MUIC IRQs in max77693
- clear VBUS & CHG bits so board doesn't reboot instead of poweroff in
twl4030
* tag 'mfd-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: twl4030-power: Fix poweroff with PM configuration enabled
mfd: max77693: Fix always masked MUIC interrupts
mfd: max77693: Use proper regmap for handling MUIC interrupts
mfd: viperboard: Fix platform-device id collision
mfd: rtsx: Fix build warnings for !PM
mfd: stmpe: Fix STMPE24xx GPMR LSB
Linus Torvalds [Wed, 12 Nov 2014 20:37:45 +0000 (12:37 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Radeon and i915 fixes.
I probably should have sent these earlier, but nothing too urgent in
them:
- i915:
blackscreen and corruption fixes
- radeon:
oops, locking and stability"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: add missing crtc unlock when setting up the MC
drm/radeon: use gart for DMA IB tests
drm/radeon: make sure mode init is complete in bandwidth_update
drm/radeon: set correct CE ram size for CIK
drm/i915: safeguard against too high minimum brightness
drm/i915: vlv: fix gunit HW state corruption during S4 suspend
drm/i915: Disable caches for Global GTT.
Miklos Szeredi [Tue, 4 Nov 2014 10:27:12 +0000 (11:27 +0100)]
audit: keep inode pinned
Audit rules disappear when an inode they watch is evicted from the cache.
This is likely not what we want.
The guilty commit is "fsnotify: allow marks to not pin inodes in core",
which didn't take into account that audit_tree adds watches with a zero
mask.
Adding any mask should fix this.
Fixes: 90b1e7a57880 ("fsnotify: allow marks to not pin inodes in core")
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org # 2.6.36+
Signed-off-by: Paul Moore <pmoore@redhat.com>
Aravind Gopalakrishnan [Tue, 4 Nov 2014 17:49:02 +0000 (11:49 -0600)]
hwmon: (fam15h_power) Fix NB device ID for F16h M30h
F3 device ID is wrongly included in fam15h_power_id_table
for F16h M30h. It should be F4 device ID. Fix this.
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Kamil Debski [Mon, 3 Nov 2014 14:42:55 +0000 (15:42 +0100)]
hwmon: (pwm-fan) Fix suspend/resume behavior
The state of a PWM output is not clearly defined after resume. Some PWM
drivers do not restore the duty cycle upon resume, thus it is necessary to
manually restore the correct value.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Michael Ellerman [Fri, 31 Oct 2014 06:45:22 +0000 (17:45 +1100)]
hwmon: (ibmpowernv) Quieten when probing finds no device
Because we build kernels with drivers built in for many platforms, it's
normal for the ibmpowernv driver to be loaded on systems that don't have
the appropriate hardware.
Currently the driver spams the log with:
ibmpowernv ibmpowernv.0: Opal node 'sensors' not found
ibmpowernv: Platfrom driver probe failed
But there is no error, this machine is not a powernv and doesn't have
the hardware. So change the sensors message to dev_dbg(), and only print
an error about the probe failing if it's not ENODEV.
Also fix the spelling of "Platfrom" and print the actual error value.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Daniel Thompson [Tue, 11 Nov 2014 05:59:46 +0000 (16:29 +1030)]
param: fix crash on bad kernel arguments
Currently if the user passes an invalid value on the kernel command line
then the kernel will crash during argument parsing. On most systems this
is very hard to debug because the console hasn't been initialized yet.
This is a regression due to commit
51e158c12aca ("param: hand arguments
after -- straight to init") which, in response to the systemd debug
controversy, made it possible to explicitly pass arguments to init. To
achieve this parse_args() was extended from simply returning an error
code to returning a pointer. Regretably the new init args logic does not
perform a proper validity check on the pointer resulting in a crash.
This patch fixes the validity check. Should the check fail then no arguments
will be passed to init. This is reasonable and matches how the kernel treats
its own arguments (i.e. no error recovery).
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rabin Vincent [Thu, 6 Nov 2014 21:26:07 +0000 (22:26 +0100)]
tracing: Do not risk busy looping in buffer splice
If the read loop in trace_buffers_splice_read() keeps failing due to
memory allocation failures without reading even a single page then this
function will keep busy looping.
Remove the risk for that by exiting the function if memory allocation
failures are seen.
Link: http://lkml.kernel.org/r/1415309167-2373-2-git-send-email-rabin@rab.in
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Rabin Vincent [Mon, 10 Nov 2014 18:46:34 +0000 (19:46 +0100)]
tracing: Do not busy wait in buffer splice
On a !PREEMPT kernel, attempting to use trace-cmd results in a soft
lockup:
# trace-cmd record -e raw_syscalls:* -F false
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61]
...
Call Trace:
[<
ffffffff8105b580>] ? __wake_up_common+0x90/0x90
[<
ffffffff81092e25>] wait_on_pipe+0x35/0x40
[<
ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0
[<
ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0
[<
ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40
[<
ffffffff810dc87b>] ? do_read_fault+0x21b/0x290
[<
ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0
[<
ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
[<
ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60
[<
ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
[<
ffffffff8112415d>] do_splice_to+0x6d/0x90
[<
ffffffff81126971>] SyS_splice+0x7c1/0x800
[<
ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8
The problem is this: tracing_buffers_splice_read() calls
ring_buffer_wait() to wait for data in the ring buffers. The buffers
are not empty so ring_buffer_wait() returns immediately. But
tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1,
meaning it only wants to read a full page. When the full page is not
available, tracing_buffers_splice_read() tries to wait again with
ring_buffer_wait(), which again returns immediately, and so on.
Fix this by adding a "full" argument to ring_buffer_wait() which will
make ring_buffer_wait() wait until the writer has left the reader's
page, i.e. until full-page reads will succeed.
Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in
Cc: stable@vger.kernel.org # 3.16+
Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function")
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Joe Thornber [Mon, 10 Nov 2014 15:03:24 +0000 (15:03 +0000)]
dm btree: fix a recursion depth bug in btree walking code
The walk code was using a 'ro_spine' to hold it's locked btree nodes.
But this data structure is designed for the rolling lock scheme, and
as such automatically unlocks blocks that are two steps up the call
chain. This is not suitable for the simple recursive walk algorithm,
which retraces its steps.
This code is only used by the persistent array code, which in turn is
only used by dm-cache. In order to trigger it you need to have a
mapping tree that is more than 2 levels deep; which equates to 8-16
million cache blocks. For instance a 4T ssd with a very small block
size of 32k only just triggers this bug.
The fix just places the locked blocks on the stack, and stops using
the ro_spine altogether.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Tony Lindgren [Sun, 2 Nov 2014 18:07:56 +0000 (10:07 -0800)]
mfd: twl4030-power: Fix poweroff with PM configuration enabled
Commit
e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset
configuration") enabled configuring the PM features for twl4030.
This caused poweroff command to fail on devices that have the
BCI charger on twl4030 wired, or have power wired for VBUS.
Instead of powering off, the device reboots. This is because
voltage is detected on charger or VBUS with the default bits
enabled for the power transition registers.
To fix the issue, let's just clear VBUS and CHG bits as we want
poweroff command to keep the system powered off.
Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Krzysztof Kozlowski [Fri, 10 Oct 2014 10:48:35 +0000 (12:48 +0200)]
mfd: max77693: Fix always masked MUIC interrupts
All interrupts coming from MUIC were ignored because interrupt source
register was masked.
The Maxim 77693 has a "interrupt source" - a separate register and interrupts
which give information about PMIC block triggering the individual
interrupt (charger, topsys, MUIC, flash LED).
By default bootloader could initialize this register to "mask all"
value. In such case (observed on Trats2 board) MUIC interrupts won't be
generated regardless of their mask status. Regmap irq chip was unmasking
individual MUIC interrupts but the source was masked
Before introducing regmap irq chip this interrupt source was unmasked,
read and acked. Reading and acking is not necessary but unmasking is.
Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Krzysztof Kozlowski [Fri, 10 Oct 2014 08:22:01 +0000 (10:22 +0200)]
mfd: max77693: Use proper regmap for handling MUIC interrupts
Interrupts coming from Maxim77693 MUIC block (MicroUSB Interface
Controller) were not handled at all because wrong regmap was used for
MUIC's regmap_irq_chip.
The MUIC component of Maxim 77693 uses different I2C address thus second
regmap is created and used by max77693 extcon driver. The registers for
MUIC interrupts are also in that block and should be handled by that
second regmap.
However the regmap irq chip for MUIC was configured with default regmap
which could not read MUIC registers.
Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Johan Hovold [Fri, 26 Sep 2014 10:55:28 +0000 (12:55 +0200)]
mfd: viperboard: Fix platform-device id collision
Allow more than one viperboard to be connected by registering with
PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE.
The subdevices are currently registered with PLATFORM_DEVID_NONE, which
will cause a name collision on the platform bus when a second viperboard
is plugged in:
viperboard 1-2.4:1.0: version 0.00 found at bus 001 address 004
------------[ cut here ]------------
WARNING: CPU: 0 PID: 181 at /home/johan/work/omicron/src/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x74/0x84()
sysfs: cannot create duplicate filename '/bus/platform/devices/viperboard-gpio'
Modules linked in: i2c_viperboard viperboard netconsole [last unloaded: viperboard]
CPU: 0 PID: 181 Comm: bash Tainted: G W 3.17.0-rc6 #1
[<
c0016bf4>] (unwind_backtrace) from [<
c0013860>] (show_stack+0x20/0x24)
[<
c0013860>] (show_stack) from [<
c04305f8>] (dump_stack+0x24/0x28)
[<
c04305f8>] (dump_stack) from [<
c0040fb4>] (warn_slowpath_common+0x80/0x98)
[<
c0040fb4>] (warn_slowpath_common) from [<
c004100c>] (warn_slowpath_fmt+0x40/0x48)
[<
c004100c>] (warn_slowpath_fmt) from [<
c016f1bc>] (sysfs_warn_dup+0x74/0x84)
[<
c016f1bc>] (sysfs_warn_dup) from [<
c016f548>] (sysfs_do_create_link_sd.isra.2+0xcc/0xd0)
[<
c016f548>] (sysfs_do_create_link_sd.isra.2) from [<
c016f588>] (sysfs_create_link+0x3c/0x48)
[<
c016f588>] (sysfs_create_link) from [<
c02867ec>] (bus_add_device+0x12c/0x1e0)
[<
c02867ec>] (bus_add_device) from [<
c0284820>] (device_add+0x410/0x584)
[<
c0284820>] (device_add) from [<
c0289440>] (platform_device_add+0xd8/0x26c)
[<
c0289440>] (platform_device_add) from [<
c02a5ae4>] (mfd_add_device+0x240/0x344)
[<
c02a5ae4>] (mfd_add_device) from [<
c02a5ce0>] (mfd_add_devices+0xb8/0x110)
[<
c02a5ce0>] (mfd_add_devices) from [<
bf00d1c8>] (vprbrd_probe+0x160/0x1b0 [viperboard])
[<
bf00d1c8>] (vprbrd_probe [viperboard]) from [<
c030c000>] (usb_probe_interface+0x1bc/0x2a8)
[<
c030c000>] (usb_probe_interface) from [<
c028768c>] (driver_probe_device+0x14c/0x3ac)
[<
c028768c>] (driver_probe_device) from [<
c02879e4>] (__driver_attach+0xa4/0xa8)
[<
c02879e4>] (__driver_attach) from [<
c0285698>] (bus_for_each_dev+0x70/0xa4)
[<
c0285698>] (bus_for_each_dev) from [<
c0287030>] (driver_attach+0x2c/0x30)
[<
c0287030>] (driver_attach) from [<
c030a288>] (usb_store_new_id+0x170/0x1ac)
[<
c030a288>] (usb_store_new_id) from [<
c030a2f8>] (new_id_store+0x34/0x3c)
[<
c030a2f8>] (new_id_store) from [<
c02853ec>] (drv_attr_store+0x30/0x3c)
[<
c02853ec>] (drv_attr_store) from [<
c016eaa8>] (sysfs_kf_write+0x5c/0x60)
[<
c016eaa8>] (sysfs_kf_write) from [<
c016dc68>] (kernfs_fop_write+0xd4/0x194)
[<
c016dc68>] (kernfs_fop_write) from [<
c010fe40>] (vfs_write+0xb4/0x1c0)
[<
c010fe40>] (vfs_write) from [<
c01104a8>] (SyS_write+0x4c/0xa0)
[<
c01104a8>] (SyS_write) from [<
c000f900>] (ret_fast_syscall+0x0/0x48)
---[ end trace
98e8603c22d65817 ]---
viperboard 1-2.4:1.0: Failed to add mfd devices to core.
viperboard: probe of 1-2.4:1.0 failed with error -17
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Thierry Reding [Thu, 2 Oct 2014 07:25:17 +0000 (09:25 +0200)]
mfd: rtsx: Fix build warnings for !PM
rtsx_pci_power_off() is called only from rtsx_pci_suspend(), which isn't
built when PM is disabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Walleij [Sat, 4 Oct 2014 14:02:27 +0000 (16:02 +0200)]
mfd: stmpe: Fix STMPE24xx GPMR LSB
The least significat byte of the GPIO value read register
on the STMPE24xx series is on addres 0xA4 not 0xA5. Correct
against datasheet and tested on the STMPE2401 hardware.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Chris Zankel [Mon, 10 Nov 2014 08:05:43 +0000 (00:05 -0800)]
Merge tag 'v3.18-rc4' into for_next
Linux 3.18-rc4
Dave Airlie [Mon, 10 Nov 2014 00:05:37 +0000 (10:05 +1000)]
Merge tag 'drm-intel-fixes-2014-11-07' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Black screen, screen corruption, hardware state corruption fixes.
* tag 'drm-intel-fixes-2014-11-07' of git://anongit.freedesktop.org/drm-intel:
drm/i915: safeguard against too high minimum brightness
drm/i915: vlv: fix gunit HW state corruption during S4 suspend
drm/i915: Disable caches for Global GTT.
Linus Torvalds [Sun, 9 Nov 2014 22:55:29 +0000 (14:55 -0800)]
Linux 3.18-rc4
Linus Torvalds [Sun, 9 Nov 2014 22:49:56 +0000 (14:49 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- enable bpf syscall for compat
- cpu_suspend fix when checking the idle state type
- defconfig update
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: defconfig: update defconfig for 3.18
arm64: compat: Enable bpf syscall
arm64: psci: fix cpu_suspend to check idle state type for index
Linus Torvalds [Sun, 9 Nov 2014 22:46:36 +0000 (14:46 -0800)]
Merge tag 'armsoc-for-rc4' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another quiet week:
- a fix to silence edma probe error on non-supported platforms from
Arnd
- a fix to enable the PL clock for Parallella, to make mainline
usable with the SDK.
- a somewhat verbose fix for the PLL clock tree on VF610
- enabling of SD/MMC on one of the VF610-based boards (for testing)
- a fix for i.MX where CONFIG_SPI used to be implicitly enabled and
now needs to be added to the defconfig instead
- another maintainer added for bcm2835: Lee Jones"
* tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: zynq: Enable PL clocks for Parallella
dma: edma: move device registration to platform code
ARM: dts: vf610: add SD node to cosmic dts
MAINTAINERS: update bcm2835 entry
ARM: imx: Fix the removal of CONFIG_SPI option
ARM: imx: clk-vf610: define PLL's clock tree
Linus Torvalds [Sun, 9 Nov 2014 22:33:49 +0000 (14:33 -0800)]
Merge branch 'devicetree/merge' of git://git./linux/kernel/git/glikely/linux
Pull devicetree bugfix from Grant Likely:
"One buffer overflow bug that shouldn't be left around"
* 'devicetree/merge' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
of: Fix overflow bug in string property parsing functions
Linus Torvalds [Sun, 9 Nov 2014 22:30:24 +0000 (14:30 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
"It's a one liner for an error cleanup path that leads to crashes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
Linus Torvalds [Sun, 9 Nov 2014 22:11:58 +0000 (14:11 -0800)]
Merge tag 'driver-core-3.18-rc4' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are 3 tiny fixes for 3.18-rc4.
One fixes up a long-stading race condition in the driver core for
removing directories in /sys/devices/virtual/ and the other 2 fix up
the wording of a new Kconfig option that was added in 3.18-rc1"
* tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
tiny: reverse logic for DISABLE_DEV_COREDUMP
sysfs: driver core: Fix glue dir race condition by gdp_mutex
Linus Torvalds [Sun, 9 Nov 2014 22:11:07 +0000 (14:11 -0800)]
Merge tag 'staging-3.18-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging/iio fixes for 3.18-rc4.
Nothing major, just a few bugfixes of things that have been reported"
* tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging:iio:
ade7758: Remove "raw" from channel name
staging:iio:
ade7758: Fix check if channels are enabled in prenable
staging:iio:
ade7758: Fix NULL pointer deref when enabling buffer
iio: as3935: allocate correct iio_device size
io: accel: kxcjk-1013: Fix iio_event_spec direction
iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined
iio: adc: mxs-lradc: Disable the clock on probe failure
iio: st_sensors: Fix buffer copy
staging:iio:ad5933: Drop "raw" from channel names
staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
Linus Torvalds [Sun, 9 Nov 2014 22:07:30 +0000 (14:07 -0800)]
Merge tag 'tty-3.18-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some
reported issues"
* tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix pty master poll() after slave closes v2
serial: of-serial: fix uninitialized kmalloc variable
tty/vt: don't set font mappings on vc not supporting this
tty: serial: 8250_mtk: Fix quot calculation
tty: Prevent "read/write wait queue active!" log flooding
tty: Fix high cpu load if tty is unreleaseable
serial: Fix divide-by-zero fault in uart_get_divisor()
Linus Torvalds [Sun, 9 Nov 2014 22:05:53 +0000 (14:05 -0800)]
Merge tag 'usb-3.18-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 3.18-rc4.
Just a bunch of little fixes resolving reported issues and new device
ids for existing drivers. Full details are in the shortlog"
* tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: Update default usb-storage delay_use value in kernel-parameters.txt
USB: cdc-acm: add quirk for control-line state requests
phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly
USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init()
USB: cdc-acm: only raise DTR on transitions from B0
Revert "storage: Replace magic number with define in usb_stor_euscsi_init()"
usb: core: notify disconnection when core detects disconnect
usb: core: need to call usb_phy_notify_connect after device setup
uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models
xhci: no switching back on non-ULT Haswell
USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen
USB: quirks: enable device-qualifier quirk for another Elan touchscreen
MAINTAINERS: Remove duplicate entry for usbip driver
usb: storage: fix build warnings !CONFIG_PM
usb: Remove references to non-existent PLAT_S5P symbol
uas: Add NO_ATA_1X for VIA VL711 devices
xhci: Disable streams on Asmedia 1042 xhci controllers
USB: HWA: fix a warning message
uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model
usb-storage: handle a skipped data phase
...
Heiner Kallweit [Sat, 8 Nov 2014 19:35:54 +0000 (20:35 +0100)]
imx: thermal: imx_get_temp might be called before sensor clock is prepared
imx_get_temp might be called before the sensor clock is prepared
thus resulting in a timeout of the first attempt to read temp:
thermal thermal_zone0: failed to read out thermal zone 0
Happened to me on a Utilite Standard with IMX6 Dual SoC.
Reason is that in imx_thermal_probe thermal_zone_device_register
is called before the sensor clock is prepared.
thermal_zone_device_register however calls
thermal_zone_device_update which eventually calls imx_get_temp.
Fix this by preparing the clock before calling
thermal_zone_device_register.
Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Andreas Färber [Thu, 6 Nov 2014 17:22:10 +0000 (18:22 +0100)]
ARM: dts: zynq: Enable PL clocks for Parallella
The Parallella board comes with a U-Boot bootloader that loads one of
two predefined FPGA bitstreams before booting the kernel. Both define an
AXI interface to the on-board Epiphany processor.
Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.
Otherwise accessing, e.g., the ESYSRESET register freezes the board,
as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.
Cc: <stable@vger.kernel.org> # 3.17.x
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sat, 8 Nov 2014 17:32:29 +0000 (09:32 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c bugfixes from Wolfram Sang:
"One bigger cleanup (FSF address removal) and two bugfixes for I2C"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Dispose OF IRQ mapping at client removal time
i2c: at91: don't account as iowait
i2c: remove FSF address
Linus Torvalds [Sat, 8 Nov 2014 16:47:16 +0000 (08:47 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two fixlets for the armada SoC interrupt controller"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: armada-370-xp: Fix MPIC interrupt handling
irqchip: armada-370-xp: Fix MSI interrupt handling
Linus Torvalds [Sat, 8 Nov 2014 16:45:20 +0000 (08:45 -0800)]
Merge git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"For:
- some regression fixes at the Remote Controller core and imon driver
- a build fix for certain randconfigs with ir-hix5hd2
- don't feed power to satellite system at ds3000 driver init
It also contains some fixes for drivers added for Kernel 3.18:
- some fixes at the new ISDB-S driver, and the corresponding bits to
fix some descriptors for this Japanese TV standard at the DVB core
- two warning cleanups for sp2 driver if PM is disabled
- change the default mode for the new vivid driver"
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] sp2: sp2_init() can be static
[media] dvb:tc90522: fix always-false expression
[media] dvb-core: set default properties of ISDB-S
[media] dvb:tc90522: fix stats report
[media] vivid: default to single planar device instances
[media] imon: fix other RC type protocol support
[media] ir-hix5hd2 fix build warning
[media] ds3000: fix LNB supply voltage on Tevii S480 on initialization
[media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding
[media] rc-core: fix protocol_change regression in ir_raw_event_register
Linus Torvalds [Sat, 8 Nov 2014 02:08:02 +0000 (18:08 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This weeks' round of MIPS bug fixes for 3.18:
- wire up the bpf syscall
- fix TLB dump output for R3000 class TLBs
- fix strnlen_user return value if no NUL character was found.
- fix build with binutils 2.24.51+. While there is no binutils 2.25
release yet, toolchains derived from binutils 2.24.51+ are already
in common use.
- the Octeon GPIO code forgot to offline GPIO IRQs.
- fix build error for XLP.
- fix possible BUG assertion with EVA for CMA"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Fix build with binutils 2.24.51+
MIPS: R3000: Fix debug output for Virtual page number
MIPS: Fix strnlen_user() return value in case of overlong strings.
MIPS: CMA: Do not reserve memory if not required
MIPS: Wire up bpf syscall.
MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
Linus Torvalds [Fri, 7 Nov 2014 22:08:13 +0000 (14:08 -0800)]
Merge tag 'xfs-for-linus-3.18-rc3' of git://git./linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This update fixes a warning in the new pagecache_isize_extended() and
updates some related comments, another fix for zero-range
misbehaviour, and an unforntuately large set of fixes for regressions
in the bulkstat code.
The bulkstat fixes are large but necessary. I wouldn't normally push
such a rework for a -rcX update, but right now xfsdump can silently
create incomplete dumps on 3.17 and it's possible that even xfsrestore
won't notice that the dumps were incomplete. Hence we need to get
this update into 3.17-stable kernels ASAP.
In more detail, the refactoring work I committed in 3.17 has exposed a
major hole in our QA coverage. With both xfsdump (the major user of
bulkstat) and xfsrestore silently ignoring missing files in the
dump/restore process, incomplete dumps were going unnoticed if they
were being triggered. Many of the dump/restore filesets were so small
that they didn't evenhave a chance of triggering the loop iteration
bugs we introduced in 3.17, so we didn't exercise the code
sufficiently, either.
We have already taken steps to improve QA coverage in xfstests to
avoid this happening again, and I've done a lot of manual verification
of dump/restore on very large data sets (tens of millions of inodes)
of the past week to verify this patch set results in bulkstat behaving
the same way as it does on 3.16.
Unfortunately, the fixes are not exactly simple - in tracking down the
problem historic API warts were discovered (e.g xfsdump has been
working around a 20 year old bug in the bulkstat API for the past 10
years) and so that complicated the process of diagnosing and fixing
the problems. i.e. we had to fix bugs in the code as well as
discover and re-introduce the userspace visible API bugs that we
unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly.
Summary:
- incorrect warnings about i_mutex locking in pagecache_isize_extended()
and updates comments to match expected locking
- another zero-range bug fix for stray file size updates
- a bunch of fixes for regression in the bulkstat code introduced in
3.17"
* tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: track bulkstat progress by agino
xfs: bulkstat error handling is broken
xfs: bulkstat main loop logic is a mess
xfs: bulkstat chunk-formatter has issues
xfs: bulkstat chunk formatting cursor is broken
xfs: bulkstat btree walk doesn't terminate
mm: Fix comment before truncate_setsize()
xfs: rework zero range to prevent invalid i_size updates
mm: Remove false WARN_ON from pagecache_isize_extended()
xfs: Check error during inode btree iteration in xfs_bulkstat()
xfs: bulkstat doesn't release AGI buffer on error
Linus Torvalds [Fri, 7 Nov 2014 19:55:47 +0000 (11:55 -0800)]
Merge tag 'regulator-v3.18-rc3' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"More changes than I'd like here, most of them for a single bug
repeated in a bunch of drivers with data not being initialized
correctly, plus a fix to lower the severity of a warning introduced in
the last merge window which can legitimately go off so we don't want
to alarm users excessively"
* tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: s2mpa01: zero-initialize regulator match table array
regulator: max8660: zero-initialize regulator match table array
regulator: max77802: zero-initialize regulator match table
regulator: max77686: zero-initialize regulator match table
regulator: max1586: zero-initialize regulator match table array
regulator: max77693: Fix use of uninitialized regulator config
regulator: of: Lower the severity of the error with no container
Linus Torvalds [Fri, 7 Nov 2014 19:54:44 +0000 (11:54 -0800)]
Merge tag 'spi-v3.18-rc3' of git://git./linux/kernel/git/broonie/spi
Pull spi bugfixes from Mark Brown:
"A couple of small driver fixes for v3.18, both quite problematic if
you hit a use case that's affected"
* tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM
spi: fsl-dspi: Fix CTAR selection
Johannes Berg [Thu, 30 Oct 2014 09:00:35 +0000 (10:00 +0100)]
tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
The ENABLE_DEV_COREDUMP option is misleading as it implies that
it gets the framework enabled, this isn't true it just allows it
to get enabled if a driver needs it.
Rename it to ALLOW_DEV_COREDUMP to better capture its semantics.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aristeu Rozanski [Thu, 16 Oct 2014 15:49:49 +0000 (11:49 -0400)]
tiny: reverse logic for DISABLE_DEV_COREDUMP
It's desirable for allnconfig and tinyconfig targets to result in the
least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to
switch off DEV_COREDUMP regardless if any drivers select
WANT_DEV_COREDUMP.
This patch renames the option to ENABLE_DEV_COREDUMP and setting it to
'n' (as in allnconfig or tinyconfig) will effectively disable device
coredump.
Cc: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bartlomiej Zolnierkiewicz [Thu, 11 Sep 2014 13:00:49 +0000 (15:00 +0200)]
thermal: exynos: use correct offset for TMU_CONTROL register on Exynos5260
In exynos5260_tmu_registers tmu_ctrl entry is erroneously
assigned twice. The second assignment (to EXYNOS_TMU_REG_CONTROL1
define which represents 0x24 value) overrides the first one
(to EXYNOS_TMU_REG_CONTROL define which represents 0x20 value)
which results in the wrong (according to the Exynos5260 SoC
documentation that I have) offset being used for TMU_CONTROL
register. Fix it by removing the wrong assignment and then
remove no longer used EXYNOS_TMU_REG_CONTROL1 define.
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Bai Ping [Tue, 14 Oct 2014 05:12:07 +0000 (13:12 +0800)]
thermal: imx: correct driver load sequence for cpu cooling
thermal driver should be regisetered after cpufreq driver has
been registered and probed. Doing so is to make sure that thermal
driver can get the max cpu cooling states correctly when calling
get_property.
Signed-off-by: Bai Ping <b51503@freescale.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Laurent Pinchart [Thu, 30 Oct 2014 13:59:37 +0000 (15:59 +0200)]
i2c: core: Dispose OF IRQ mapping at client removal time
Clients instantiated from OF get an IRQ mapping created at device
registration time. Dispose the mapping when the client is removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Wolfram Sang [Mon, 3 Nov 2014 20:16:16 +0000 (21:16 +0100)]
i2c: at91: don't account as iowait
iowait is for blkio [1]. I2C shouldn't use it.
[1] https://lkml.org/lkml/2014/11/3/317
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable@kernel.org
Wolfram Sang [Tue, 4 Nov 2014 22:46:27 +0000 (23:46 +0100)]
i2c: remove FSF address
We have a central copy of the GPL for that. Some addresses were already
outdated.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Mark Knibbs [Tue, 4 Nov 2014 13:00:15 +0000 (13:00 +0000)]
USB: Update default usb-storage delay_use value in kernel-parameters.txt
Back in 2010 the default usb-storage delay_use time was reduced from 5 to 1
second (commit
a4a47bc03fe520e95e0c4212bf97c86545fb14f9), but
kernel-parameters.txt wasn't updated to reflect that.
Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yijing Wang [Fri, 7 Nov 2014 04:05:49 +0000 (12:05 +0800)]
sysfs: driver core: Fix glue dir race condition by gdp_mutex
There is a race condition when removing glue directory.
It can be reproduced in following test:
path 1: Add first child device
device_add()
get_device_parent()
/*find parent from glue_dirs.list*/
list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry)
if (k->parent == parent_kobj) {
kobj = kobject_get(k);
break;
}
....
class_dir_create_and_add()
path2: Remove last child device under glue dir
device_del()
cleanup_device_parent()
cleanup_glue_dir()
kobject_put(glue_dir);
If path2 has been called cleanup_glue_dir(), but not
call kobject_put(glue_dir), the glue dir is still
in parent's kset list. Meanwhile, path1 find the glue
dir from the glue_dirs.list. Path2 may release glue dir
before path1 call kobject_get(). So kernel will report
the warning and bug_on.
This is a "classic" problem we have of a kref in a list
that can be found while the last instance could be removed
at the same time.
This patch reuse gdp_mutex to fix this race condition.
The following calltrace is captured in kernel 3.4, but
the latest kernel still has this bug.
-----------------------------------------------------
<4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40()
<4>[ 3965.441474] Hardware name: Romley
<4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)...
...
<4>[ 3965.441605] Call Trace:
<4>[ 3965.441611] [<
ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0
<4>[ 3965.441615] [<
ffffffff810371c5>] warn_slowpath_null+0x15/0x20
<4>[ 3965.441618] [<
ffffffff81215963>] kobject_get+0x33/0x40
<4>[ 3965.441624] [<
ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0
<4>[ 3965.441627] [<
ffffffff812d22d4>] device_add+0xd4/0x6d0
<4>[ 3965.441631] [<
ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40
....
<2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65!
<4>[ 3965.441915] invalid opcode: 0000 [#1] SMP
...
<4>[ 3965.686743] [<
ffffffff811a677e>] sysfs_create_group+0xe/0x10
<4>[ 3965.686748] [<
ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20
<4>[ 3965.686753] [<
ffffffff811fcabb>] blk_register_queue+0x3b/0x120
<4>[ 3965.686756] [<
ffffffff812030bc>] add_disk+0x1cc/0x490
....
-------------------------------------------------------
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Cc: <stable@vger.kernel.org> #3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manuel Lauss [Fri, 7 Nov 2014 13:13:54 +0000 (14:13 +0100)]
MIPS: Fix build with binutils 2.24.51+
Starting with version 2.24.51.
20140728 MIPS binutils complain loudly
about mixing soft-float and hard-float object files, leading to this
build failure since GCC is invoked with "-msoft-float" on MIPS:
{standard input}: Warning: .gnu_attribute 4,3 requires `softfloat'
LD arch/mips/alchemy/common/built-in.o
mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o
uses -msoft-float (set by arch/mips/alchemy/common/prom.o),
arch/mips/alchemy/common/sleeper.o uses -mhard-float
To fix this, we detect if GAS is new enough to support "-msoft-float" command
option, and if it does, we can let GCC pass it to GAS; but then we also need
to sprinkle the files which make use of floating point registers with the
necessary ".set hardfloat" directives.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Dave Airlie [Fri, 7 Nov 2014 00:46:00 +0000 (10:46 +1000)]
Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- fix missing crtc unlock in MC setup
- set optimal CE ram config
- use gart rather than vram for DMA IB tests to avoid coherency issues with HDP
- fix a crasher with laptop mode and TDP scripts
* 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add missing crtc unlock when setting up the MC
drm/radeon: use gart for DMA IB tests
drm/radeon: make sure mode init is complete in bandwidth_update
drm/radeon: set correct CE ram size for CIK
Alex Deucher [Wed, 5 Nov 2014 22:14:32 +0000 (17:14 -0500)]
drm/radeon: add missing crtc unlock when setting up the MC
Need to unlock the crtc after updating the blanking state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Dave Chinner [Thu, 6 Nov 2014 21:33:52 +0000 (08:33 +1100)]
xfs: track bulkstat progress by agino
The bulkstat main loop progress is tracked by the "lastino"
variable, which is a full 64 bit inode. However, the loop actually
works on agno/agino pairs, and so there's a significant disconnect
between the rest of the loop and the main cursor. Convert this to
use the agino, and pass the agino into the chunk formatting function
and convert it too.
This gets rid of the inconsistency in the loop processing, and
finally makes it simple for us to skip inodes at any point in the
loop simply by incrementing the agino cursor.
cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Thu, 6 Nov 2014 21:31:15 +0000 (08:31 +1100)]
xfs: bulkstat error handling is broken
The error propagation is a horror - xfs_bulkstat() returns
a rval variable which is only set if there are formatter errors. Any
sort of btree walk error or corruption will cause the bulkstat walk
to terminate but will not pass an error back to userspace. Worse
is the fact that formatter errors will also be ignored if any inodes
were correctly formatted into the user buffer.
Hence bulkstat can fail badly yet still report success to userspace.
This causes significant issues with xfsdump not dumping everything
in the filesystem yet reporting success. It's not until a restore
fails that there is any indication that the dump was bad and tha
bulkstat failed. This patch now triggers xfsdump to fail with
bulkstat errors rather than silently missing files in the dump.
This now causes bulkstat to fail when the lastino cookie does not
fall inside an existing inode chunk. The pre-3.17 code tolerated
that error by allowing the code to move to the next inode chunk
as the agino target is guaranteed to fall into the next btree
record.
With the fixes up to this point in the series, xfsdump now passes on
the troublesome filesystem image that exposes all these bugs.
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Dave Chinner [Thu, 6 Nov 2014 21:31:13 +0000 (08:31 +1100)]
xfs: bulkstat main loop logic is a mess
There are a bunch of variables tha tare more wildy scoped than they
need to be, obfuscated user buffer checks and tortured "next inode"
tracking. This all needs cleaning up to expose the real issues that
need fixing.
cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Thu, 6 Nov 2014 21:30:58 +0000 (08:30 +1100)]
xfs: bulkstat chunk-formatter has issues
The loop construct has issues:
- clustidx is completely unused, so remove it.
- the loop tries to be smart by terminating when the
"freecount" tells it that all inodes are free. Just drop
it as in most cases we have to scan all inodes in the
chunk anyway.
- move the "user buffer left" condition check to the only
point where we consume space int eh user buffer.
- move the initialisation of agino out of the loop, leaving
just a simple loop control logic using the clusteridx.
Also, double handling of the user buffer variables leads to problems
tracking the current state - use the cursor variables directly
rather than keeping local copies and then having to update the
cursor before returning.
cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Thu, 6 Nov 2014 21:30:30 +0000 (08:30 +1100)]
xfs: bulkstat chunk formatting cursor is broken
The xfs_bulkstat_agichunk formatting cursor takes buffer values from
the main loop and passes them via the structure to the chunk
formatter, and the writes the changed values back into the main loop
local variables. Unfortunately, this complex dance is full of corner
cases that aren't handled correctly.
The biggest problem is that it is double handling the information in
both the main loop and the chunk formatting function, leading to
inconsistent updates and endless loops where progress is not made.
To fix this, push the struct xfs_bulkstat_agichunk outwards to be
the primary holder of user buffer information. this removes the
double handling in the main loop.
Also, pass the last inode processed by the chunk formatter as a
separate parameter as it purely an output variable and is not
related to the user buffer consumption cursor.
Finally, the chunk formatting code is not shared by anyone, so make
it local to xfs_itable.c.
cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dave Chinner [Thu, 6 Nov 2014 21:29:57 +0000 (08:29 +1100)]
xfs: bulkstat btree walk doesn't terminate
The bulkstat code has several different ways of detecting the end of
an AG when doing a walk. They are not consistently detected, and the
code that checks for the end of AG conditions is not consistently
coded. Hence the are conditions where the walk code can get stuck in
an endless loop making no progress and not triggering any
termination conditions.
Convert all the "tmp/i" status return codes from btree operations
to a common name (stat) and apply end-of-ag detection to these
operations consistently.
cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Jan Kara [Thu, 6 Nov 2014 21:29:25 +0000 (08:29 +1100)]
mm: Fix comment before truncate_setsize()
XFS doesn't always hold i_mutex when calling truncate_setsize() and it
uses a different lock to serialize truncates and writes. So fix the
comment before truncate_setsize().
Reported-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Alex Deucher [Mon, 3 Nov 2014 16:27:17 +0000 (11:27 -0500)]
drm/radeon: use gart for DMA IB tests
Use gart rather than vram to avoid having to deal with
the HDP cache.
Port of
adfed2b0587289013f8143c54913ddfd44ac1fd3
(drm/radeon: use gart memory for DMA ring tests)
to the IB tests.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Mon, 3 Nov 2014 14:57:46 +0000 (09:57 -0500)]
drm/radeon: make sure mode init is complete in bandwidth_update
The power management code calls into the display code for
certain things. If certain power management sysfs attributes
are called before the driver has finished initializing all of
the hardware we can run into problems with uninitialized
modesetting state. Add a check to make sure modesetting
init has completed to the bandwidth update callbacks to
fix this. Can be triggered by the tlp and laptop start
up scripts depending on the timing.
bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=83611
https://bugs.freedesktop.org/show_bug.cgi?id=85771
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Jammy Zhou [Mon, 3 Nov 2014 13:58:20 +0000 (08:58 -0500)]
drm/radeon: set correct CE ram size for CIK
CE ram size is 32k/0k/0k for GFX/CS0/CS1 with CIK
Ported from amdgpu driver.
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Johan Hovold [Thu, 6 Nov 2014 17:08:33 +0000 (18:08 +0100)]
USB: cdc-acm: add quirk for control-line state requests
Add new quirk for devices that cannot handle control-line state
requests.
Note that we currently send these requests to all devices, regardless of
whether they claim to support it, but that errors are only logged if
support is claimed.
Since commit
0943d8ead30e ("USB: cdc-acm: use tty-port dtr_rts"), which
only changed the timings for these requests slightly, this has been
reported to cause occasional firmware crashes on Simtec Electronics
Entropy Key devices after re-enumeration. Enable the quirk for this
device.
Reported-by: Nix <nix@esperi.org.uk>
Tested-by: Nix <nix@esperi.org.uk>
Cc: stable <stable@vger.kernel.org> # v3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 6 Nov 2014 20:24:03 +0000 (12:24 -0800)]
Merge tag 'fixes-for-v3.18-rc4' of git://git./linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v3.18-rc4
A single fix this for dwc2 this time. Because of
excessive debugging messages, dwc2 would sometimes
fail enumeration. The fix is simple, just converting
a dev_info() into dev_dbg().
Signed-off-by: Felipe Balbi <balbi@ti.com>
Francesco Ruggeri [Fri, 10 Oct 2014 20:09:53 +0000 (13:09 -0700)]
tty: Fix pty master poll() after slave closes v2
Commit
f95499c3030f ("n_tty: Don't wait for buffer work in read() loop")
introduces a race window where a pty master can be signalled that the pty
slave was closed before all the data that the slave wrote is delivered.
Commit
f8747d4a466a ("tty: Fix pty master read() after slave closes") fixed the
problem in case of n_tty_read, but the problem still exists for n_tty_poll.
This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done'
where test.py is:
import os, select, pty
(pid, pty_fd) = pty.fork()
if pid == 0:
os.write(1, 'This string should be received by parent')
else:
poller = select.epoll()
poller.register( pty_fd, select.EPOLLIN )
ready = poller.poll( 1 * 1000 )
for fd, events in ready:
if not events & select.EPOLLIN:
print 'missed POLLIN event'
else:
print os.read(fd, 100)
poller.close()
The string from the slave is missed several times.
This patch takes the same approach as the fix for read and special cases
this condition for poll.
Tested on 3.16.
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 6 Nov 2014 20:22:36 +0000 (12:22 -0800)]
Merge tag 'usb-serial-3.18-rc4' of git://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v3.18-rc4
Two fixes of non-atomic allocations in write paths.
Signed-off-by: Johan Hovold <johan@kernel.org>
Linus Torvalds [Thu, 6 Nov 2014 19:33:06 +0000 (11:33 -0800)]
Merge tag 'pci-v3.18-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"This fixes an oops when enabling SR-IOV VF devices. The oops is a
regression I added by configuring all devices during enumeration.
- Don't oops on virtual buses in acpi_pci_get_bridge_handle() (Yinghai Lu)"
* tag 'pci-v3.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()
Linus Torvalds [Thu, 6 Nov 2014 19:31:32 +0000 (11:31 -0800)]
Merge tag 'sound-3.18-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This update contains mostly only fixes for Realtek HD-audio codec
driver in addition to a long-standing sysfs warning bug fix for
USB-audio.
One significant fix for Realtek codecs is the update of EAPD init
codes. This avoids invalid COEF setups for some codec models and may
fix "lost sound" in some cases.
The rest are a bit high volume but only new quirks and ALC668-specific
COEF tables"
* tag 'sound-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Restore default value for ALC668
ALSA: usb-audio: Fix device_del() sysfs warnings at disconnect
ALSA: hda - fix mute led problem for three HP laptops
ALSA: hda/realtek - Update Initial AMP for EAPD control
ALSA: hda - change three SSID quirks to one pin quirk
ALSA: hda - Set GPIO 4 low for a few HP machines
ALSA: hda - Add ultra dock support for Thinkpad X240.
Linus Torvalds [Thu, 6 Nov 2014 19:29:45 +0000 (11:29 -0800)]
Merge tag 'mmc-v3.18-2' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fix from Ulf Hansson:
"Fix card detection regression in the MMC core.
The MMC_CAP2_CD_ACTIVE_HIGH and MMC_CAP2_RO_ACTIVE_HIGH could under
some circumstances be set incorrectly, causing the card detection to
fail"
* tag 'mmc-v3.18-2' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: core: fix card detection regression
Linus Torvalds [Thu, 6 Nov 2014 19:28:14 +0000 (11:28 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull another filesystem fix from Al Viro:
"A fix for embarrassing braino in o2net_send_tcp_msg(). -stable
fodder..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix breakage in o2net_send_tcp_msg()
Jani Nikula [Wed, 5 Nov 2014 12:46:31 +0000 (14:46 +0200)]
drm/i915: safeguard against too high minimum brightness
Never trust (your interpretation of) the VBT. Regression from
commit
6dda730e55f412a6dfb181cae6784822ba463847
Author: Jani Nikula <jani.nikula@intel.com>
Date: Tue Jun 24 18:27:40 2014 +0300
drm/i915: respect the VBT minimum backlight brightness
causing div by zero if VBT minimum brightness equals maximum brightness.
Despite my attempts I've failed in my detective work to figure out what
the root cause is. This is not the real fix, but we have to do
something.
Reported-by: Mike Auty <mike.auty@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=86551
Cc: stable@vger.kernel.org (v3.17+)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Imre Deak [Wed, 10 Sep 2014 15:16:54 +0000 (18:16 +0300)]
drm/i915: vlv: fix gunit HW state corruption during S4 suspend
During S4 freeze we don't call intel_suspend_complete(), which would
save the gunit HW state, but during S4 thaw/restore events we call
intel_resume_prepare() which restores it, thus ending up in a corrupted
HW state.
Fix this by calling intel_suspend_complete() from the corresponding
freeze_late event handler.
The issue was introduced in
commit
016970beb05da6285c2f3ed2bee1c676cb75972e
Author: Sagar Kamble <sagar.a.kamble@intel.com>
Date: Wed Aug 13 23:07:06 2014 +0530
CC: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rodrigo Vivi [Thu, 6 Nov 2014 00:56:36 +0000 (16:56 -0800)]
drm/i915: Disable caches for Global GTT.
Global GTT doesn't have pat_sel[2:0] so it always point to pat_sel = 000;
So the only way to avoid screen corruptions is setting PAT 0 to Uncached.
MOCS can still be used though. But if userspace is trusting PTE for
cache selection the safest thing to do is to let caches disabled.
BSpec: "For GGTT, there is NO pat_sel[2:0] from the entry,
so RTL will always use the value corresponding to pat_sel = 000"
- System agent ggtt writes (i.e. cpu gtt mmaps) already work before
this patch, i.e. the same uncached + snooping access like on gen6/7
seems to be in effect.
- So this just fixes blitter/render access. Again it looks like it's
not just uncached access, but uncached + snooping. So we can still
hold onto all our assumptions wrt cpu clflushing on LLC machines.
v2: Cleaner patch as suggested by Chris.
v3: Add Daniel's comment
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85576
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Stable@vger.kernel.org
Tested-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Greg Kurz [Fri, 31 Oct 2014 06:50:11 +0000 (07:50 +0100)]
hwrng: pseries - port to new read API and fix stack corruption
The add_early_randomness() function in drivers/char/hw_random/core.c passes
a 16-byte buffer to pseries_rng_data_read(). Unfortunately, plpar_hcall()
returns four 64-bit values and trashes 16 bytes on the stack.
This bug has been lying around for a long time. It got unveiled by:
commit
d3cc7996473a7bdd33256029988ea690754e4e2a
Author: Amit Shah <amit.shah@redhat.com>
Date: Thu Jul 10 15:42:34 2014 +0530
hwrng: fetch randomness only after device init
It may trig a oops while loading or unloading the pseries-rng module for both
PowerVM and PowerKVM guests.
This patch does two things:
- pass an intermediate well sized buffer to plpar_hcall(). This is acceptalbe
since we're not on a hot path.
- move to the new read API so that we know the return buffer size for sure.
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cristian Stoica [Thu, 30 Oct 2014 12:40:22 +0000 (14:40 +0200)]
crypto: caam - fix missing dma unmap on error path
If dma mapping for dma_addr_out fails, the descriptor memory is freed
but the previous dma mapping for dma_addr_in remains.
This patch resolves the missing dma unmap and groups resource
allocations at function start.
Cc: <stable@vger.kernel.org> # 3.13+
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Isamu Mogi [Thu, 30 Oct 2014 13:07:36 +0000 (22:07 +0900)]
MIPS: R3000: Fix debug output for Virtual page number
Virtual page number of R3000 in entryhi is 20 bit from MSB. But in
dump_tlb(), the bit mask to read it from entryhi is 19 bit (0xffffe000).
The patch fixes that to 0xfffff000.
Signed-off-by: Isamu Mogi <isamu@leafytree.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8290/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Mark Brown [Thu, 6 Nov 2014 12:58:46 +0000 (12:58 +0000)]
Merge remote-tracking branches 'spi/fix/fsl-dspi' and 'spi/fix/pxa2xx' into spi-linus
Dmitry Eremin-Solenikov [Thu, 6 Nov 2014 11:08:29 +0000 (14:08 +0300)]
spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM
If PM_RUNTIME is enabled, it is easy to trigger the following backtrace
on pxa2xx hosts:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at /home/lumag/linux/arch/arm/mach-pxa/clock.c:35 clk_disable+0xa0/0xa8()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted
3.17.0-00007-g1b3d2ee-dirty #104
[<
c000de68>] (unwind_backtrace) from [<
c000c078>] (show_stack+0x10/0x14)
[<
c000c078>] (show_stack) from [<
c001d75c>] (warn_slowpath_common+0x6c/0x8c)
[<
c001d75c>] (warn_slowpath_common) from [<
c001d818>] (warn_slowpath_null+0x1c/0x24)
[<
c001d818>] (warn_slowpath_null) from [<
c0015e80>] (clk_disable+0xa0/0xa8)
[<
c0015e80>] (clk_disable) from [<
c02507f8>] (pxa2xx_spi_suspend+0x2c/0x34)
[<
c02507f8>] (pxa2xx_spi_suspend) from [<
c0200360>] (platform_pm_suspend+0x2c/0x54)
[<
c0200360>] (platform_pm_suspend) from [<
c0207fec>] (dpm_run_callback.isra.14+0x2c/0x74)
[<
c0207fec>] (dpm_run_callback.isra.14) from [<
c0209254>] (__device_suspend+0x120/0x2f8)
[<
c0209254>] (__device_suspend) from [<
c0209a94>] (dpm_suspend+0x50/0x208)
[<
c0209a94>] (dpm_suspend) from [<
c00455ac>] (suspend_devices_and_enter+0x8c/0x3a0)
[<
c00455ac>] (suspend_devices_and_enter) from [<
c0045ad4>] (pm_suspend+0x214/0x2a8)
[<
c0045ad4>] (pm_suspend) from [<
c04b5c34>] (test_suspend+0x14c/0x1dc)
[<
c04b5c34>] (test_suspend) from [<
c000880c>] (do_one_initcall+0x8c/0x1fc)
[<
c000880c>] (do_one_initcall) from [<
c04aecfc>] (kernel_init_freeable+0xf4/0x1b4)
[<
c04aecfc>] (kernel_init_freeable) from [<
c0378078>] (kernel_init+0x8/0xec)
[<
c0378078>] (kernel_init) from [<
c0009590>] (ret_from_fork+0x14/0x24)
---[ end trace
46524156d8faa4f6 ]---
This happens because suspend function tries to disable a clock that is
already disabled by runtime_suspend callback. Add if
(!pm_runtime_suspended()) checks to suspend/resume path.
Fixes: 7d94a505858 (spi/pxa2xx: add support for runtime PM)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reported-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Jingchang Lu [Tue, 21 Oct 2014 08:50:21 +0000 (16:50 +0800)]
serial: of-serial: fix uninitialized kmalloc variable
The info pointer points to an uninitialized kmalloced space.
If a device doesn't have clk property, then info->clk may
have unpredicated value and cause call trace. So use kzalloc
to make sure it is NULL initialized.
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Thu, 2 Oct 2014 13:34:31 +0000 (16:34 +0300)]
tty/vt: don't set font mappings on vc not supporting this
We can call this function for a dummy console that doesn't support
setting the font mapping, which will result in a null ptr BUG. So check
for this case and return error for consoles w/o font mapping support.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=59321
Signed-off-by: Imre Deak <imre.deak@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Brugger [Thu, 9 Oct 2014 16:23:31 +0000 (18:23 +0200)]
tty: serial: 8250_mtk: Fix quot calculation
The calculation of value quot for highspeed register set to three
was wrong. This patch fixes the calculation so that the serial port
for baudrates bigger then 576000 baud is working correctly.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 24 Oct 2014 16:14:01 +0000 (18:14 +0200)]
dma: edma: move device registration to platform code
The horrible split between the low-level part of the edma support
and the dmaengine front-end driver causes problems on multiplatform
kernels. This is an attempt to improve the situation slightly
by only registering the dmaengine devices that are actually
present.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[olof: add missing include of linux/dma-mapping.h]
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Olof Johansson <olof@lixom.net>
Peter Hurley [Thu, 16 Oct 2014 17:54:36 +0000 (13:54 -0400)]
tty: Prevent "read/write wait queue active!" log flooding
Only print one warning when a task is on the read_wait or write_wait
wait queue at final tty release.
Cc: <stable@vger.kernel.org> # 3.4.x+
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Hurley [Thu, 16 Oct 2014 17:51:30 +0000 (13:51 -0400)]
tty: Fix high cpu load if tty is unreleaseable
Kernel oops can cause the tty to be unreleaseable (for example, if
n_tty_read() crashes while on the read_wait queue). This will cause
tty_release() to endlessly loop without sleeping.
Use a killable sleep timeout which grows by 2n+1 jiffies over the interval
[0, 120 secs.) and then jumps to forever (but still killable).
NB: killable just allows for the task to be rewoken manually, not
to be terminated.
Cc: <stable@vger.kernel.org> # since before 2.6.32
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Hurley [Thu, 16 Oct 2014 17:46:38 +0000 (13:46 -0400)]
serial: Fix divide-by-zero fault in uart_get_divisor()
uart_get_baud_rate() will return baud == 0 if the max rate is set
to the "magic" 38400 rate and the SPD_* flags are also specified.
On the first iteration, if the current baud rate is higher than the
max, the baud rate is clamped at the max (which in the degenerate
case is 38400). On the second iteration, the now-"magic" 38400 baud
rate selects the possibly higher alternate baud rate indicated by
the SPD_* flag. Since only two loop iterations are performed, the
loop is exited, a kernel WARNING is generated and a baud rate of
0 is returned.
Reproducible with:
setserial /dev/ttyS0 spd_hi base_baud 38400
Only perform the "magic" 38400 -> SPD_* baud transform on the first
loop iteration, which prevents the degenerate case from recognizing
the clamped baud rate as the "magic" 38400 value.
Reported-by: Robert Święcki <robert@swiecki.net>
Cc: <stable@vger.kernel.org> # all
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Fri, 24 Oct 2014 07:43:46 +0000 (15:43 +0800)]
ALSA: hda/realtek - Restore default value for ALC668
Restore the registers to prevent the abnormal digital power supply
rising ratio/sequence to the codec and causing the incorrect default
codec register restoration during initialization.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
projects / openwrt / staging / blogic.git / log