openwrt/staging/blogic.git
6 years agoMerge branch 'pci/aer'
Bjorn Helgaas [Wed, 15 Aug 2018 19:58:45 +0000 (14:58 -0500)]
Merge branch 'pci/aer'

  - Decode AER errors with names similar to "lspci" (Tyler Baicar)

  - Expose AER statistics in sysfs (Rajat Jain)

  - Clear AER status bits selectively based on the type of recovery (Oza
    Pawandeep)

  - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
    Gagniuc)

  - Don't clear AER status bits if we're using the "Firmware-First"
    strategy where firmware owns the registers (Alexandru Gagniuc)

* pci/aer:
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition
  PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset
  PCI/AER: Clear device status bits during ERR_COR handling
  PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL
  PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path
  PCI/AER: Factor out ERR_NONFATAL status bit clearing
  PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery
  PCI/AER: Clear only ERR_FATAL status bits during fatal recovery
  PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST
  PCI/AER: Add sysfs attributes for rootport cumulative stats
  PCI/AER: Add sysfs attributes to provide AER stats and breakdown
  PCI/AER: Define aer_stats structure for AER capable devices
  PCI/AER: Move internal declarations to drivers/pci/pci.h
  PCI/AER: Adopt lspci names for AER error decoding
  PCI/AER: Expose internal API for obtaining AER information

# Conflicts:
# drivers/pci/pci.h

6 years agoMerge branch 'for-linus'
Bjorn Helgaas [Wed, 15 Aug 2018 19:58:43 +0000 (14:58 -0500)]
Merge branch 'for-linus'

* for-linus:
  PCI: Fix is_added/is_busmaster race condition
  PCI: mobiveil: Avoid integer overflow in IB_WIN_SIZE
  PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()
  PCI: v3-semi: Fix I/O space page leak
  PCI: mediatek: Fix I/O space page leak
  PCI: faraday: Fix I/O space page leak
  PCI: aardvark: Fix I/O space page leak
  PCI: designware: Fix I/O space page leak
  PCI: versatile: Fix I/O space page leak
  PCI: xgene: Fix I/O space page leak
  PCI: OF: Fix I/O space page leak
  PCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled
  PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg()
  nfp: stop limiting VFs to 0
  PCI/IOV: Reset total_VFs limit after detaching PF driver
  PCI: faraday: Add missing of_node_put()
  PCI: xilinx-nwl: Add missing of_node_put()
  PCI: xilinx: Add missing of_node_put()
  PCI: endpoint: Use after free in pci_epf_unregister_driver()
  PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
  PCI: rcar: Clean up PHY init on failure
  PCI: rcar: Shut the PHY down in failpath
  PCI: controller: Move PCI_DOMAINS selection to arch Kconfig
  PCI: Initialize endpoint library before controllers
  PCI: shpchp: Manage SHPC unconditionally on non-ACPI systems

6 years agoPCI/AER: Don't clear AER bits if error handling is Firmware-First
Alexandru Gagniuc [Tue, 17 Jul 2018 15:31:23 +0000 (10:31 -0500)]
PCI/AER: Don't clear AER bits if error handling is Firmware-First

If the platform requests Firmware-First error handling, firmware is
responsible for reading and clearing AER status bits.  If OSPM also clears
them, we may miss errors.  See ACPI v6.2, sec 18.3.2.5 and 18.4.

This race is mostly of theoretical significance, as it is not easy to
reasonably demonstrate it in testing.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[bhelgaas: add similar guards to pci_cleanup_aer_uncorrect_error_status()
and pci_aer_clear_fatal_status()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition
Bjorn Helgaas [Tue, 31 Jul 2018 21:26:09 +0000 (16:26 -0500)]
PCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition

PCI_EXP_AER_FLAGS was defined twice (with identical definitions), once
under #ifdef CONFIG_ACPI_APEI, and again at the top level.  This looks like
my merge error from these commits:

  fd3362cb73de ("PCI/AER: Squash aerdrv_core.c into aerdrv.c")
  41cbc9eb1a82 ("PCI/AER: Squash ecrc.c into aerdrv.c")

Remove the duplicate PCI_EXP_AER_FLAGS definition.

Fixes: 41cbc9eb1a82 ("PCI/AER: Squash ecrc.c into aerdrv.c")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oza Pawandeep <poza@codeaurora.org>
6 years agoPCI: Fix is_added/is_busmaster race condition
Hari Vyas [Tue, 3 Jul 2018 09:05:41 +0000 (14:35 +0530)]
PCI: Fix is_added/is_busmaster race condition

When a PCI device is detected, pdev->is_added is set to 1 and proc and
sysfs entries are created.

When the device is removed, pdev->is_added is checked for one and then
device is detached with clearing of proc and sys entries and at end,
pdev->is_added is set to 0.

is_added and is_busmaster are bit fields in pci_dev structure sharing same
memory location.

A strange issue was observed with multiple removal and rescan of a PCIe
NVMe device using sysfs commands where is_added flag was observed as zero
instead of one while removing device and proc,sys entries are not cleared.
This causes issue in later device addition with warning message
"proc_dir_entry" already registered.

Debugging revealed a race condition between the PCI core setting the
is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue
setting the is_busmaster bit in pci_set_master().  As these fields are not
handled atomically, that clears the is_added bit.

Move the is_added bit to a separate private flag variable and use atomic
functions to set and retrieve the device addition state.  This avoids the
race because is_added no longer shares a memory location with is_busmaster.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283
Signed-off-by: Hari Vyas <hari.vyas@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
6 years agoPCI: mobiveil: Avoid integer overflow in IB_WIN_SIZE
Dan Carpenter [Fri, 27 Jul 2018 22:10:39 +0000 (17:10 -0500)]
PCI: mobiveil: Avoid integer overflow in IB_WIN_SIZE

IB_WIN_SIZE is larger than INT_MAX so we need to cast it to u64.

Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Work around use-after-free in pcie_do_fatal_recovery()
Thomas Tai [Thu, 26 Jul 2018 17:13:04 +0000 (12:13 -0500)]
PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()

When an fatal error is received by a non-bridge device, the device is
removed, and pci_stop_and_remove_bus_device() deallocates the device
structure.  The freed device structure is used by subsequent code to send
uevents and print messages.

Hold a reference on the device until we're finished using it.  This is not
an ideal fix because pcie_do_fatal_recovery() should not use the device at
all after removing it, but that's too big a project for right now.

Fixes: 7e9084b36740 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
[bhelgaas: changelog, reduce get/put coverage]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset
Oza Pawandeep [Thu, 19 Jul 2018 22:58:10 +0000 (17:58 -0500)]
PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset

The pci_error_handlers.slot_reset() callback is only used for non-bridge
devices (see broadcast_error_message()).  Since portdrv only binds to
bridges, we don't need pcie_portdrv_slot_reset(), so remove it.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog, remove pcie_portdrv_slot_reset() completely]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Clear device status bits during ERR_COR handling
Oza Pawandeep [Thu, 19 Jul 2018 22:58:09 +0000 (17:58 -0500)]
PCI/AER: Clear device status bits during ERR_COR handling

In case of correctable error, the Correctable Error Detected bit in the
Device Status register is set.  Clear it after handling the error.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL
Oza Pawandeep [Thu, 19 Jul 2018 22:58:09 +0000 (17:58 -0500)]
PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL

Clear the device status bits while handling both ERR_FATAL and ERR_NONFATAL
cases.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: rename to pci_aer_clear_device_status(), declare internal to PCI
core instead of exposing it everywhere]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path
Oza Pawandeep [Thu, 19 Jul 2018 22:58:07 +0000 (17:58 -0500)]
PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path

broadcast_error_message() is only used for ERR_NONFATAL events, when the
state is always pci_channel_io_normal, so remove the unused alternate path.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Factor out ERR_NONFATAL status bit clearing
Oza Pawandeep [Thu, 19 Jul 2018 22:58:06 +0000 (17:58 -0500)]
PCI/AER: Factor out ERR_NONFATAL status bit clearing

aer_error_resume() clears all ERR_NONFATAL error status bits.  This is
exactly what pci_cleanup_aer_uncorrect_error_status(), so use that instead
of duplicating the code.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery
Oza Pawandeep [Thu, 19 Jul 2018 22:58:05 +0000 (17:58 -0500)]
PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery

pci_cleanup_aer_uncorrect_error_status() is called by driver .slot_reset()
methods when handling ERR_NONFATAL errors.  Previously this cleared *all*
the bits, including ERR_FATAL bits.

Since we're only handling ERR_NONFATAL errors, clear only the ERR_NONFATAL
error status bits.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Clear only ERR_FATAL status bits during fatal recovery
Bjorn Helgaas [Thu, 19 Jul 2018 22:55:58 +0000 (17:55 -0500)]
PCI/AER: Clear only ERR_FATAL status bits during fatal recovery

During recovery from fatal errors, we previously called
pci_cleanup_aer_uncorrect_error_status(), which cleared *all* uncorrectable
error status bits (both ERR_FATAL and ERR_NONFATAL).

Instead, call a new pci_aer_clear_fatal_status() that clears only the
ERR_FATAL bits (as indicated by the PCI_ERR_UNCOR_SEVER register).

Based-on-patch-by: Oza Pawandeep <poza@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST
Alexandru Gagniuc [Tue, 3 Jul 2018 23:27:43 +0000 (18:27 -0500)]
PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST

According to the documentation, "pcie_ports=native", linux should use
native AER and DPC services.  While that is true for the _OSC method
parsing, this is not the only place that is checked.  Should the HEST
list PCIe ports as firmware-first, linux will not use native services.

This happens because aer_acpi_firmware_first() doesn't take 'pcie_ports'
into account.  This is wrong.  DPC uses the same logic when it decides
whether to load or not, so fixing this also fixes DPC not loading.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[bhelgaas: return "false" from bool function (from kbuild robot)]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Add sysfs attributes for rootport cumulative stats
Rajat Jain [Thu, 21 Jun 2018 23:48:29 +0000 (16:48 -0700)]
PCI/AER: Add sysfs attributes for rootport cumulative stats

Add sysfs attributes for rootport statistics (that are cumulative of all
the ERR_* messages seen on this PCI hierarchy).

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Add sysfs attributes to provide AER stats and breakdown
Rajat Jain [Thu, 21 Jun 2018 23:48:28 +0000 (16:48 -0700)]
PCI/AER: Add sysfs attributes to provide AER stats and breakdown

Add sysfs attributes to provide total and breakdown of the AERs seen,
into different type of correctable, fatal and nonfatal errors:

  /sys/bus/pci/devices/<dev>/aer_dev_correctable
  /sys/bus/pci/devices/<dev>/aer_dev_fatal
  /sys/bus/pci/devices/<dev>/aer_dev_nonfatal

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Define aer_stats structure for AER capable devices
Rajat Jain [Sat, 30 Jun 2018 20:07:17 +0000 (15:07 -0500)]
PCI/AER: Define aer_stats structure for AER capable devices

Define a structure to hold the AER statistics.  There are 2 groups of
statistics: dev_* counters that are to be collected for all AER capable
devices and rootport_* counters that are collected for all (AER capable)
rootports only.  Allocate and free this structure when device is added or
released (thus counters survive the lifetime of the device).

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Move internal declarations to drivers/pci/pci.h
Rajat Jain [Thu, 21 Jun 2018 23:48:26 +0000 (16:48 -0700)]
PCI/AER: Move internal declarations to drivers/pci/pci.h

Since pci_aer_init() and pci_no_aer() are used only internally, move their
declarations to the PCI internal header file.  Also, no one cares about
return value of pci_aer_init(), so make it void.

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/AER: Adopt lspci names for AER error decoding
Tyler Baicar [Tue, 26 Jun 2018 15:44:15 +0000 (11:44 -0400)]
PCI/AER: Adopt lspci names for AER error decoding

lspci uses abbreviated naming for AER error strings.  Adopt the same naming
convention for the AER printing so they match.

Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oza Pawandeep <poza@codeaurora.org>
6 years agoPCI/AER: Expose internal API for obtaining AER information
Keith Busch [Thu, 19 Jul 2018 21:16:55 +0000 (16:16 -0500)]
PCI/AER: Expose internal API for obtaining AER information

Export some common AER functions and structures for other PCI core drivers
to use.  Since this is making the function externally visible inside the
PCI core, prepend "aer_" to the function name.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: move AER declarations from linux/aer.h to drivers/pci/pci.h]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Reviewed-by: Oza Pawandeep <poza@codeaurora.org>
6 years agoPCI: v3-semi: Fix I/O space page leak
Sergei Shtylyov [Wed, 18 Jul 2018 20:41:11 +0000 (15:41 -0500)]
PCI: v3-semi: Fix I/O space page leak

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried,  finally causing the BUG due to trying to remap
already remapped pages.

The V3 Semiconductor PCI driver has the same issue.
Replace devm_pci_remap_iospace() with its devm_ managed version to fix
the bug.

Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoPCI: mediatek: Fix I/O space page leak
Sergei Shtylyov [Wed, 18 Jul 2018 20:41:05 +0000 (15:41 -0500)]
PCI: mediatek: Fix I/O space page leak

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The MediaTek PCIe driver has the same issue.

Replace devm_pci_remap_iospace() with its devm_ managed counterpart
to fix the bug.

Fixes: 637cfacae96f ("PCI: mediatek: Add MediaTek PCIe host controller support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoPCI: faraday: Fix I/O space page leak
Sergei Shtylyov [Wed, 18 Jul 2018 20:40:59 +0000 (15:40 -0500)]
PCI: faraday: Fix I/O space page leak

When testing the R-Car PCIe driver on the Condor board, if
the PCIe PHY driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The Faraday PCI driver has the same issue. Replace pci_remap_iospace()
with its devm_ managed version to fix the bug.

Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoPCI: aardvark: Fix I/O space page leak
Sergei Shtylyov [Wed, 18 Jul 2018 20:40:53 +0000 (15:40 -0500)]
PCI: aardvark: Fix I/O space page leak

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The Aardvark PCI controller driver has the same issue.
Replace pci_remap_iospace() with its devm_ managed version to fix the bug.

Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoPCI: designware: Fix I/O space page leak
Sergei Shtylyov [Wed, 18 Jul 2018 20:40:46 +0000 (15:40 -0500)]
PCI: designware: Fix I/O space page leak

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver is left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The DesignWare PCIe controller driver has the same issue.

Replace devm_pci_remap_iospace() with a devm_ managed version to fix the
bug.

Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
6 years agoPCI: versatile: Fix I/O space page leak
Sergei Shtylyov [Wed, 18 Jul 2018 20:40:40 +0000 (15:40 -0500)]
PCI: versatile: Fix I/O space page leak

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The Versatile PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version to fix the bug.

Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoPCI: xgene: Fix I/O space page leak
Sergei Shtylyov [Wed, 18 Jul 2018 20:40:34 +0000 (15:40 -0500)]
PCI: xgene: Fix I/O space page leak

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The X-Gene PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version so that the
pages get unmapped automagically on any probe failure.

Fixes: 5f6b6ccdbe1c ("PCI: xgene: Add APM X-Gene PCIe driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoPCI: OF: Fix I/O space page leak
Sergei Shtylyov [Wed, 18 Jul 2018 20:40:26 +0000 (15:40 -0500)]
PCI: OF: Fix I/O space page leak

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

Introduce the devm_pci_remap_iospace() managed API and replace the
pci_remap_iospace() call with it to fix the bug.

Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: split commit/updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoPCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled
Kishon Vijay Abraham I [Mon, 9 Jul 2018 20:18:56 +0000 (15:18 -0500)]
PCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled

commit ef1433f717a2 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry") while adding configfs entry for each
pci_epf_device_id table entry introduced a NULL pointer dereference error
when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled.

Fix it here.

Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg()
Dexuan Cui [Mon, 9 Jul 2018 18:16:07 +0000 (13:16 -0500)]
PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg()

Commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
uses local_bh_disable()/enable(), because hv_pci_onchannelcallback() can
also run in tasklet context as the channel event callback, so bottom halves
should be disabled to prevent a race condition.

With CONFIG_PROVE_LOCKING=y in the recent mainline, or old kernels that
don't have commit f71b74bca637 ("irq/softirqs: Use lockdep to assert IRQs
are disabled/enabled"), when the upper layer IRQ code calls
hv_compose_msi_msg() with local IRQs disabled, we'll see a warning at the
beginning of __local_bh_enable_ip():

  IRQs not enabled as expected
    WARNING: CPU: 0 PID: 408 at kernel/softirq.c:162 __local_bh_enable_ip

The warning exposes an issue in de0aa7b2f97d: local_bh_enable() can
potentially call do_softirq(), which is not supposed to run when local IRQs
are disabled. Let's fix this by using local_irq_save()/restore() instead.

Note: hv_pci_onchannelcallback() is not a hot path because it's only called
when the PCI device is hot added and removed, which is infrequent.

Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
6 years agonfp: stop limiting VFs to 0
Jakub Kicinski [Fri, 29 Jun 2018 20:09:00 +0000 (15:09 -0500)]
nfp: stop limiting VFs to 0

Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions".  After 8d85a7a4f2c9, it means "we can't enable *any* VFs".

That broke this scenario where nfp intends to remove any limit on the
number of VFs that can be enabled:

  nfp_pci_probe
    nfp_pcie_sriov_read_nfd_limit
      nfp_rtsym_read_le("nfd_vf_cfg_max_vfs", &err)
      pci_sriov_set_totalvfs(pf->pdev, 0)   # if FW didn't expose a limit

  ...
  # userspace writes N to sysfs "sriov_numvfs":
  sriov_numvfs_store
    pci_sriov_get_totalvfs                  # now returns 0
    return -ERANGE

Prior to 8d85a7a4f2c9, pci_sriov_get_totalvfs() returned TotalVFs, but it
now returns 0.

Remove the pci_sriov_set_totalvfs(pdev, 0) calls so we don't limit the
number of VFs that can be enabled.

Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI/IOV: Reset total_VFs limit after detaching PF driver
Jakub Kicinski [Fri, 29 Jun 2018 20:08:52 +0000 (15:08 -0500)]
PCI/IOV: Reset total_VFs limit after detaching PF driver

The TotalVFs register in the SR-IOV capability is the hardware limit on the
number of VFs.  A PF driver can limit the number of VFs further with
pci_sriov_set_totalvfs().  When the PF driver is removed, reset any VF
limit that was imposed by the driver because that limit may not apply to
other drivers.

Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions", and the nfp driver used that to remove the VF limit when the
driver unloads.

8d85a7a4f2c9 broke that because instead of removing the VF limit,
pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that
limit persists even if another driver is loaded.

We could fix that by making the nfp driver reset the limit when it unloads,
but it seems more robust to do it in the PCI core instead of relying on the
driver.

The regression scenario is:

  nfp_pci_probe (driver 1)
  ...
  nfp_pci_remove
    pci_sriov_set_totalvfs(pf->pdev, 0)   # limits VFs to 0

  ...
  nfp_pci_probe (driver 2)
    nfp_rtsym_read_le("nfd_vf_cfg_max_vfs")
    # no VF limit from firmware

Now driver 2 is broken because the VF limit is still 0 from driver 1.

Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog, rename functions]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI: faraday: Add missing of_node_put()
Nicholas Mc Guire [Fri, 29 Jun 2018 18:50:27 +0000 (13:50 -0500)]
PCI: faraday: Add missing of_node_put()

The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented here in the error
path and after the last usage.

Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
6 years agoPCI: xilinx-nwl: Add missing of_node_put()
Nicholas Mc Guire [Fri, 29 Jun 2018 18:50:10 +0000 (13:50 -0500)]
PCI: xilinx-nwl: Add missing of_node_put()

The call to of_get_next_child() returns a node pointer with
refcount incremented thus it must be explicitly decremented
here after the last usage.

Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI: xilinx: Add missing of_node_put()
Nicholas Mc Guire [Fri, 29 Jun 2018 18:49:54 +0000 (13:49 -0500)]
PCI: xilinx: Add missing of_node_put()

The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.

Fixes: 8961def56845 ("PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: reworked commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI: endpoint: Use after free in pci_epf_unregister_driver()
Dan Carpenter [Fri, 29 Jun 2018 18:49:24 +0000 (13:49 -0500)]
PCI: endpoint: Use after free in pci_epf_unregister_driver()

We need to use list_for_each_entry_safe() because the
pci_ep_cfs_remove_epf_group() function frees "group".

Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
6 years agoPCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
Geert Uytterhoeven [Fri, 29 Jun 2018 18:49:04 +0000 (13:49 -0500)]
PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes

PCIE_DW_PLAT_HOST does not have any platform dependency, so it should
not default to yes.

Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
6 years agoPCI: rcar: Clean up PHY init on failure
Marek Vasut [Fri, 29 Jun 2018 18:48:15 +0000 (13:48 -0500)]
PCI: rcar: Clean up PHY init on failure

If the Gen3 PHY fails to power up, the code does not undo the
initialization caused by phy_init(). Add the missing failure
handling to the rcar_pcie_phy_init_gen3() function.

Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
6 years agoPCI: rcar: Shut the PHY down in failpath
Marek Vasut [Fri, 29 Jun 2018 18:47:38 +0000 (13:47 -0500)]
PCI: rcar: Shut the PHY down in failpath

If anything fails past phy_init_fn() and the system is a Gen3 with
a PHY, the PHY will be left on and inited. This is caused by the
phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3()
function, which starts the PHY, yet has no counterpart in the failpath.
Add that counterpart.

Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
6 years agoPCI: controller: Move PCI_DOMAINS selection to arch Kconfig
Lorenzo Pieralisi [Tue, 19 Jun 2018 11:21:05 +0000 (12:21 +0100)]
PCI: controller: Move PCI_DOMAINS selection to arch Kconfig

Commit 51bc085d6454 ("PCI: Improve host drivers compile test coverage")
added configuration options to allow PCI host controller drivers to be
compile tested on all architectures.

Some host controller drivers (eg PCIE_ALTERA) config entries select the
PCI_DOMAINS config option to enable PCI domains management in the kernel.
Now that host controller drivers can be compiled on all architectures, this
triggers build regressions on arches that do not implement the PCI_DOMAINS
required API (ie pci_domain_nr()):

  drivers/ata/pata_ali.c: In function 'ali_init_chipset':
  drivers/ata/pata_ali.c:469:38: error: implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?

Furthemore, some software configurations (ie Jailhouse) require a
PCI_DOMAINS enabled kernel to configure multiple host controllers without
having an explicit dependency on the ARM platform on which they run.

Make PCI_DOMAINS a visible configuration option on ARM so that software
configurations that need it can manually select it and move the PCI_DOMAINS
selection from PCI controllers configuration file to ARM sub-arch config
entries that currently require it, fixing the issue.

Fixes: 51bc085d6454 ("PCI: Improve host drivers compile test coverage")
Link: https://lkml.kernel.org/r/20180612170229.GA10141@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
6 years agoPCI: Initialize endpoint library before controllers
Alan Douglas [Fri, 22 Jun 2018 16:17:17 +0000 (17:17 +0100)]
PCI: Initialize endpoint library before controllers

The endpoint library must be initialized before its users, which are in
drivers/pci/controllers.  The endpoint initialization currently depends on
link order.

This corrects a kernel crash when loading the Cadence EP driver, since it
calls devm_pci_epc_create() and this is only valid once the endpoint
library has been initialized.

Fixes: 6e0832fa432e ("PCI: Collect all native drivers under drivers/pci/controller/")
Signed-off-by: Alan Douglas <adouglas@cadence.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
6 years agoPCI: shpchp: Manage SHPC unconditionally on non-ACPI systems
Bjorn Helgaas [Mon, 25 Jun 2018 13:17:33 +0000 (08:17 -0500)]
PCI: shpchp: Manage SHPC unconditionally on non-ACPI systems

An SHPC can be operated either by platform firmware or by the OS.  The OS
uses a host bridge ACPI _OSC method to negotiate for control of SHPC.  If
firmware wants to prevent an OS from operating an SHPC, it must supply an
_OSC method that declines to grant SHPC ownership to the OS.

If acpi_pci_find_root() returns NULL, it means there's no ACPI host bridge
device (PNP0A03 or PNP0A08) and hence no _OSC method, so the OS is always
allowed to manage the SHPC.

Fix a NULL pointer dereference when CONFIG_ACPI=y but the current
hardware/firmware platform doesn't support ACPI.  In that case,
acpi_get_hp_hw_control_from_firmware() is implemented but
acpi_pci_find_root() returns NULL.

Fixes: 90cc0c3cc709 ("PCI: shpchp: Add shpchp_is_native()")
Link: https://lkml.kernel.org/r/20180621164715.28160-1-marc.zyngier@arm.com
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
6 years agoLinux 4.18-rc1
Linus Torvalds [Sat, 16 Jun 2018 23:04:49 +0000 (08:04 +0900)]
Linux 4.18-rc1

6 years agoMerge tag 'for-linus-20180616' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 16 Jun 2018 20:37:55 +0000 (05:37 +0900)]
Merge tag 'for-linus-20180616' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into -rc1. This contains:

   - bsg_open vs bsg_unregister race fix (Anatoliy)

   - NVMe pull request from Christoph, with fixes for regressions in
     this window, FC connect/reconnect path code unification, and a
     trace point addition.

   - timeout fix (Christoph)

   - remove a few unused functions (Christoph)

   - blk-mq tag_set reinit fix (Roman)"

* tag 'for-linus-20180616' of git://git.kernel.dk/linux-block:
  bsg: fix race of bsg_open and bsg_unregister
  block: remov blk_queue_invalidate_tags
  nvme-fabrics: fix and refine state checks in __nvmf_check_ready
  nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
  nvme-fabrics: refactor queue ready check
  blk-mq: remove blk_mq_tagset_iter
  nvme: remove nvme_reinit_tagset
  nvme-fc: fix nulling of queue data on reconnect
  nvme-fc: remove reinit_request routine
  blk-mq: don't time out requests again that are in the timeout handler
  nvme-fc: change controllers first connect to use reconnect path
  nvme: don't rely on the changed namespace list log
  nvmet: free smart-log buffer after use
  nvme-rdma: fix error flow during mapping request data
  nvme: add bio remapping tracepoint
  nvme: fix NULL pointer dereference in nvme_init_subsystem
  blk-mq: reinit q->tag_set_list entry only after grace period

6 years agoMerge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental
Linus Torvalds [Sat, 16 Jun 2018 20:25:18 +0000 (05:25 +0900)]
Merge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental

Pull documentation fixes from Mauro Carvalho Chehab:
 "This solves a series of broken links for files under Documentation,
  and improves a script meant to detect such broken links (see
  scripts/documentation-file-ref-check).

  The changes on this series are:

   - can.rst: fix a footnote reference;

   - crypto_engine.rst: Fix two parsing warnings;

   - Fix a lot of broken references to Documentation/*;

   - improve the scripts/documentation-file-ref-check script, in order
     to help detecting/fixing broken references, preventing
     false-positives.

  After this patch series, only 33 broken references to doc files are
  detected by scripts/documentation-file-ref-check"

* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
  fix a series of Documentation/ broken file name references
  Documentation: rstFlatTable.py: fix a broken reference
  ABI: sysfs-devices-system-cpu: remove a broken reference
  devicetree: fix a series of wrong file references
  devicetree: fix name of pinctrl-bindings.txt
  devicetree: fix some bindings file names
  MAINTAINERS: fix location of DT npcm files
  MAINTAINERS: fix location of some display DT bindings
  kernel-parameters.txt: fix pointers to sound parameters
  bindings: nvmem/zii: Fix location of nvmem.txt
  docs: Fix more broken references
  scripts/documentation-file-ref-check: check tools/*/Documentation
  scripts/documentation-file-ref-check: get rid of false-positives
  scripts/documentation-file-ref-check: hint: dash or underline
  scripts/documentation-file-ref-check: add a fix logic for DT
  scripts/documentation-file-ref-check: accept more wildcards at filenames
  scripts/documentation-file-ref-check: fix help message
  media: max2175: fix location of driver's companion documentation
  media: v4l: fix broken video4linux docs locations
  media: dvb: point to the location of the old README.dvb-usb file
  ...

6 years agoMerge tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 16 Jun 2018 20:06:18 +0000 (05:06 +0900)]
Merge tag 'fsnotify_for_v4.18-rc1' of git://git./linux/kernel/git/jack/linux-fs

Pull fsnotify updates from Jan Kara:
 "fsnotify cleanups unifying handling of different watch types.

  This is the shortened fsnotify series from Amir with the last five
  patches pulled out. Amir has modified those patches to not change
  struct inode but obviously it's too late for those to go into this
  merge window"

* tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: add fsnotify_add_inode_mark() wrappers
  fanotify: generalize fanotify_should_send_event()
  fsnotify: generalize send_to_group()
  fsnotify: generalize iteration of marks by object type
  fsnotify: introduce marks iteration helpers
  fsnotify: remove redundant arguments to handle_event()
  fsnotify: use type id to identify connector object type

6 years agoMerge tag 'fbdev-v4.18' of git://github.com/bzolnier/linux
Linus Torvalds [Sat, 16 Jun 2018 20:00:24 +0000 (05:00 +0900)]
Merge tag 'fbdev-v4.18' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here, few small fixes, some cleanups and
  dead drivers removal:

   - mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen)

   - add missing module license tags to omap/omapfb driver (Arnd
     Bergmann)

   - add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd
     Bergmann)

   - convert savagefb, aty128fb & radeonfb drivers to use msleep & co.
     (Jia-Ju Bai)

   - allow COMPILE_TEST build for viafb driver (media part was reviewed
     by media subsystem Maintainer)

   - remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm
     drivers (drm parts were acked by shmob-drm driver Maintainer)

   - remove unused auo_k190xfb drivers

   - misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy
     Shevchenko, Colin Ian King)"

* tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits)
  fb_omap2: add gpiolib dependency
  video/omap: add module license tags
  MAINTAINERS: make omapfb orphan
  video: fbdev: pxafb: match_string() conversion fixup
  video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling"
  video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer"
  video: fbdev: pxafb: Convert to use match_string() helper
  video: fbdev: via: allow COMPILE_TEST build
  video: fbdev: remove unused sh_mobile_meram driver
  drm: shmobile: remove unused MERAM support
  video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support
  video: fbdev: remove unused auo_k190xfb drivers
  video: omap: Improve a size determination in omapfb_do_probe()
  video: sm501fb: Improve a size determination in sm501fb_probe()
  video: fbdev-MMP: Improve a size determination in path_init()
  video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions
  video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe()
  video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions
  video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe()
  video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency
  ...

6 years agoMerge branch 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 16 Jun 2018 07:32:04 +0000 (16:32 +0900)]
Merge branch 'afs-proc' of git://git./linux/kernel/git/viro/vfs

Pull AFS updates from Al Viro:
 "Assorted AFS stuff - ended up in vfs.git since most of that consists
  of David's AFS-related followups to Christoph's procfs series"

* 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs: Optimise callback breaking by not repeating volume lookup
  afs: Display manually added cells in dynamic root mount
  afs: Enable IPv6 DNS lookups
  afs: Show all of a server's addresses in /proc/fs/afs/servers
  afs: Handle CONFIG_PROC_FS=n
  proc: Make inline name size calculation automatic
  afs: Implement network namespacing
  afs: Mark afs_net::ws_cell as __rcu and set using rcu functions
  afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()
  proc: Add a way to make network proc files writable
  afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
  afs: Rearrange fs/afs/proc.c to move the show routines up
  afs: Rearrange fs/afs/proc.c by moving fops and open functions down
  afs: Move /proc management functions to the end of the file

6 years agoMerge branch 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 16 Jun 2018 07:21:50 +0000 (16:21 +0900)]
Merge branch 'work.compat' of git://git./linux/kernel/git/viro/vfs

Pull compat updates from Al Viro:
 "Some biarch patches - getting rid of assorted (mis)uses of
  compat_alloc_user_space().

  Not much in that area this cycle..."

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs: simplify compat ioctl handling
  signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()
  vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart

6 years agoMerge branch 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 16 Jun 2018 07:11:40 +0000 (16:11 +0900)]
Merge branch 'work.aio' of git://git./linux/kernel/git/viro/vfs

Pull aio fixes from Al Viro:
 "Assorted AIO followups and fixes"

* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  eventpoll: switch to ->poll_mask
  aio: only return events requested in poll_mask() for IOCB_CMD_POLL
  eventfd: only return events requested in poll_mask()
  aio: mark __aio_sigset::sigmask const

6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 15 Jun 2018 22:39:34 +0000 (07:39 +0900)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Various netfilter fixlets from Pablo and the netfilter team.

 2) Fix regression in IPVS caused by lack of PMTU exceptions on local
    routes in ipv6, from Julian Anastasov.

 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.

 4) Don't crash on poll in TLS, from Daniel Borkmann.

 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
    including Avahi mDNS. From Bart Van Assche.

 6) Missing of_node_put in qcom/emac driver, from Yue Haibing.

 7) We lack checking of the TCP checking in one special case during SYN
    receive, from Frank van der Linden.

 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.

 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.

10) Must grab HW caps before doing quirk checks in stmmac driver, from
    Jose Abreu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  net: stmmac: Run HWIF Quirks after getting HW caps
  neighbour: skip NTF_EXT_LEARNED entries during forced gc
  net: cxgb3: add error handling for sysfs_create_group
  tls: fix waitall behavior in tls_sw_recvmsg
  tls: fix use-after-free in tls_push_record
  l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
  l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
  mlxsw: spectrum_switchdev: Fix port_vlan refcounting
  mlxsw: spectrum_router: Align with new route replace logic
  mlxsw: spectrum_router: Allow appending to dev-only routes
  ipv6: Only emit append events for appended routes
  stmmac: added support for 802.1ad vlan stripping
  cfg80211: fix rcu in cfg80211_unregister_wdev
  mac80211: Move up init of TXQs
  mac80211_hwsim: fix module init error paths
  cfg80211: initialize sinfo in cfg80211_get_station
  nl80211: fix some kernel doc tag mistakes
  hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
  rds: avoid unenecessary cong_update in loop transport
  l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
  ...

6 years agoMerge tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu...
Linus Torvalds [Fri, 15 Jun 2018 22:36:39 +0000 (07:36 +0900)]
Merge tag 'modules-for-v4.18' of git://git./linux/kernel/git/jeyu/linux

Pull module updates from Jessica Yu:
 "Minor code cleanup and also allow sig_enforce param to be shown in
  sysfs with CONFIG_MODULE_SIG_FORCE"

* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Allow to always show the status of modsign
  module: Do not access sig_enforce directly

6 years agoMerge branch 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 15 Jun 2018 21:50:51 +0000 (06:50 +0900)]
Merge branch 'for-linus-4.18-rc1' of git://git./linux/kernel/git/rw/uml

Pull uml updates from Richard Weinberger:
 "Minor updates for UML:

   - fixes for our new vector network driver by Anton

   - initcall cleanup by Alexander

   - We have a new mailinglist, sourceforge.net sucks"

* 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix raw interface options
  um: Fix initialization of vector queues
  um: remove uml initcalls
  um: Update mailing list address

6 years agoMerge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Fri, 15 Jun 2018 21:42:43 +0000 (06:42 +0900)]
Merge tag 'riscv-for-linus-4.18-merge_window' of git://git./linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some small RISC-V updates I'd like to target for 4.18.

  They are all fairly small this time. Here's a short summary, there's
  more info in the commits/merges:

   - a fix to __clear_user to respect the passed arguments.

   - enough support for the perf subsystem to work with RISC-V's ISA
     defined performance counters.

   - support for sparse and cleanups suggested by it.

   - support for R_RISCV_32 (a relocation, not the 32-bit ISA).

   - some MAINTAINERS cleanups.

   - the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
     always present.

  I've given these a simple build+boot test"

* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
  RISC-V: Handle R_RISCV_32 in modules
  riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
  riscv: add riscv-specific predefines to CHECKFLAGS
  riscv: split the declaration of __copy_user
  riscv: no __user for probe_kernel_address()
  riscv: use NULL instead of a plain 0
  perf: riscv: Add Document for Future Porting Guide
  perf: riscv: preliminary RISC-V support
  MAINTAINERS: Update Albert's email, he's back at Berkeley
  MAINTAINERS: Add myself as a maintainer for SiFive's drivers
  riscv: Fix the bug in memory access fixup code

6 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Fri, 15 Jun 2018 21:37:04 +0000 (06:37 +0900)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull more kvm updates from Paolo Bonzini:
 "Mostly the PPC part of the release, but also switching to Arnd's fix
  for the hyperv config issue and a typo fix.

  Main PPC changes:

   - reimplement the MMIO instruction emulation

   - transactional memory support for PR KVM

   - improve radix page table handling"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits)
  KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV
  KVM: x86: fix typo at kvm_arch_hardware_setup comment
  KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation
  KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode
  KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit
  KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation
  KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts
  KVM: PPC: Book3S PR: Handle additional interrupt types
  KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers
  KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS
  KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl
  KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl
  KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl
  KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM
  KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state
  KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state
  KVM: PPC: Book3S PR: Add emulation for trechkpt.
  KVM: PPC: Book3S PR: Add emulation for treclaim.
  KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs
  KVM: PPC: Book3S PR: Always fail transactions in guest privileged state
  ...

6 years agoMerge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Fri, 15 Jun 2018 21:35:02 +0000 (06:35 +0900)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "virtio, vhost: features, fixes

   - PCI virtual function support for virtio

   - DMA barriers for virtio strong barriers

   - bugfixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: update the comments for transport features
  virtio_pci: support enabling VFs
  vhost: fix info leak due to uninitialized memory
  virtio_ring: switch to dma_XX barriers for rpmsg

6 years agofix a series of Documentation/ broken file name references
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:34:32 +0000 (12:34 -0300)]
fix a series of Documentation/ broken file name references

As files move around, their previous links break. Fix the
references for them.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoDocumentation: rstFlatTable.py: fix a broken reference
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:33:06 +0000 (12:33 -0300)]
Documentation: rstFlatTable.py: fix a broken reference

The old HOWTO was removed a long time ago. The flat table
version is not metioned elsewhere, so just get rid of the
text.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoABI: sysfs-devices-system-cpu: remove a broken reference
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:32:05 +0000 (12:32 -0300)]
ABI: sysfs-devices-system-cpu: remove a broken reference

This file doesn't exist anymore:
Documentation/cpu-freq/user-guide.txt

As the ABI already points to Documentation/cpu-freq, just
remove the broken link and the associated text.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodevicetree: fix a series of wrong file references
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:30:30 +0000 (12:30 -0300)]
devicetree: fix a series of wrong file references

As files got renamed, their references broke.

Manually fix a series of broken refs at the DT bindings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodevicetree: fix name of pinctrl-bindings.txt
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:24:41 +0000 (12:24 -0300)]
devicetree: fix name of pinctrl-bindings.txt

Rename:
pinctrl-binding.txt -> pinctrl-bindings.txt

In order to match the current name of this file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodevicetree: fix some bindings file names
Mauro Carvalho Chehab [Thu, 14 Jun 2018 12:39:01 +0000 (09:39 -0300)]
devicetree: fix some bindings file names

There were some file movements that changed the location for
some DT bindings. Fix them with:
scripts/documentation-file-ref-check --fix

After manually checking if the new file makes sense.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoMAINTAINERS: fix location of DT npcm files
Mauro Carvalho Chehab [Thu, 14 Jun 2018 11:59:37 +0000 (08:59 -0300)]
MAINTAINERS: fix location of DT npcm files

The specified locations are not right. Fix the wildcard logic
to point to the correct directories.

Without that, get-maintainer won't get things right:

$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)

After the patch, it will properly point to NPCM arch maintainers:
$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
avifishman70@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
tmaimon77@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)

Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoMAINTAINERS: fix location of some display DT bindings
Mauro Carvalho Chehab [Thu, 14 Jun 2018 11:01:00 +0000 (08:01 -0300)]
MAINTAINERS: fix location of some display DT bindings

Those files got a manufacturer's name prepended and were moved around.
Adjust their references accordingly.

Also, due those movements, Documentation/devicetree/bindings/video
doesn't exist anymore.

Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agokernel-parameters.txt: fix pointers to sound parameters
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:43:07 +0000 (07:43 -0300)]
kernel-parameters.txt: fix pointers to sound parameters

The alsa parameters file was renamed to alsa-configuration.rst.

With regards to OSS, it got retired as a hole by  at changeset
727dede0ba8a ("sound: Retire OSS"). So, it doesn't make sense
to keep mentioning it at kernel-parameters.txt.

Fixes: 727dede0ba8a ("sound: Retire OSS")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agobindings: nvmem/zii: Fix location of nvmem.txt
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:18:45 +0000 (07:18 -0300)]
bindings: nvmem/zii: Fix location of nvmem.txt

The location pointed there is missing "bindings/" on its path.

Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: Fix more broken references
Mauro Carvalho Chehab [Tue, 8 May 2018 18:14:57 +0000 (15:14 -0300)]
docs: Fix more broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: check tools/*/Documentation
Mauro Carvalho Chehab [Thu, 14 Jun 2018 14:06:08 +0000 (11:06 -0300)]
scripts/documentation-file-ref-check: check tools/*/Documentation

Some files, like tools/memory-model/README has references to
a Documentation file that is locale to it. Handle references
that are relative to them too.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: get rid of false-positives
Mauro Carvalho Chehab [Thu, 14 Jun 2018 13:47:29 +0000 (10:47 -0300)]
scripts/documentation-file-ref-check: get rid of false-positives

Now that the number of broken refs are smaller, improve the logic
that gets rid of false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: hint: dash or underline
Mauro Carvalho Chehab [Thu, 14 Jun 2018 13:14:54 +0000 (10:14 -0300)]
scripts/documentation-file-ref-check: hint: dash or underline

Sometimes, people use dash instead of underline or vice-versa.
Try to autocorrect it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: add a fix logic for DT
Mauro Carvalho Chehab [Thu, 14 Jun 2018 12:36:35 +0000 (09:36 -0300)]
scripts/documentation-file-ref-check: add a fix logic for DT

There are several links broken due to DT file movements. Add
a hint logic to seek for those changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: accept more wildcards at filenames
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:48:22 +0000 (07:48 -0300)]
scripts/documentation-file-ref-check: accept more wildcards at filenames

at MAINTAINERS, some filename paths use '?' and things like [7,9].
So, accept more wildcards, in order to avoid false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoscripts/documentation-file-ref-check: fix help message
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:11:02 +0000 (07:11 -0300)]
scripts/documentation-file-ref-check: fix help message

The name of the --fix option was renamed, but it was not
changed at the quick help message.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agomedia: max2175: fix location of driver's companion documentation
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:34:51 +0000 (07:34 -0300)]
media: max2175: fix location of driver's companion documentation

There's a missing ".rst" at the doc's file name.

Acked-by: Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agomedia: v4l: fix broken video4linux docs locations
Mauro Carvalho Chehab [Tue, 8 May 2018 22:41:44 +0000 (19:41 -0300)]
media: v4l: fix broken video4linux docs locations

There are several places pointing to old documentation files:

  Documentation/video4linux/API.html
  Documentation/video4linux/bttv/
  Documentation/video4linux/cx2341x/fw-encoder-api.txt
  Documentation/video4linux/m5602.txt
  Documentation/video4linux/v4l2-framework.txt
  Documentation/video4linux/videobuf
  Documentation/video4linux/Zoran

Make them point to the new location where available, removing
otherwise.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agomedia: dvb: point to the location of the old README.dvb-usb file
Mauro Carvalho Chehab [Tue, 8 May 2018 21:29:30 +0000 (18:29 -0300)]
media: dvb: point to the location of the old README.dvb-usb file

This file got renamed, but the references still point to the
old place.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agomedia: dvb: fix location of get_dvb_firmware script
Mauro Carvalho Chehab [Tue, 8 May 2018 21:10:05 +0000 (18:10 -0300)]
media: dvb: fix location of get_dvb_firmware script

This script was moved out of Documentation/dvb, but the
links weren't updated.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: Fix some broken references
Mauro Carvalho Chehab [Tue, 8 May 2018 18:14:57 +0000 (15:14 -0300)]
docs: Fix some broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: fix broken references with multiple hints
Mauro Carvalho Chehab [Tue, 8 May 2018 21:54:36 +0000 (18:54 -0300)]
docs: fix broken references with multiple hints

The script:
./scripts/documentation-file-ref-check --fix

Gives multiple hints for broken references on some files.
Manually use the one that applies for some files.

Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agonet: stmmac: Run HWIF Quirks after getting HW caps
Jose Abreu [Fri, 15 Jun 2018 15:17:27 +0000 (16:17 +0100)]
net: stmmac: Run HWIF Quirks after getting HW caps

Currently we were running HWIF quirks before getting HW capabilities.
This is not right because some HWIF callbacks depend on HW caps.

Lets save the quirks callback and use it in a later stage.

This fixes Altera socfpga.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: 5f0456b43140 ("net: stmmac: Implement logic to automatically select HW Interface")
Reported-by: Dinh Nguyen <dinh.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoneighbour: skip NTF_EXT_LEARNED entries during forced gc
Roopa Prabhu [Wed, 13 Jun 2018 04:26:10 +0000 (21:26 -0700)]
neighbour: skip NTF_EXT_LEARNED entries during forced gc

Commit 9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
added support for NTF_EXT_LEARNED for neighbour entries.
NTF_EXT_LEARNED entries are neigh entries managed by control
plane (eg: Ethernet VPN implementation in FRR routing suite).
Periodic gc already excludes these entries. This patch extends
it to forced gc which the earlier patch missed.

Fixes: 9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: cxgb3: add error handling for sysfs_create_group
Zhouyang Jia [Fri, 15 Jun 2018 03:06:17 +0000 (11:06 +0800)]
net: cxgb3: add error handling for sysfs_create_group

When sysfs_create_group fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling sysfs_create_group.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'tls-fixes'
David S. Miller [Fri, 15 Jun 2018 16:14:31 +0000 (09:14 -0700)]
Merge branch 'tls-fixes'

Daniel Borkmann says:

====================
Two tls fixes

First one is syzkaller trigered uaf and second one noticed
while writing test code with tls ulp. For details please see
individual patches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotls: fix waitall behavior in tls_sw_recvmsg
Daniel Borkmann [Fri, 15 Jun 2018 01:07:46 +0000 (03:07 +0200)]
tls: fix waitall behavior in tls_sw_recvmsg

Current behavior in tls_sw_recvmsg() is to wait for incoming tls
messages and copy up to exactly len bytes of data that the user
provided. This is problematic in the sense that i) if no packet
is currently queued in strparser we keep waiting until one has been
processed and pushed into tls receive layer for tls_wait_data() to
wake up and push the decrypted bits to user space. Given after
tls decryption, we're back at streaming data, use sock_rcvlowat()
hint from tcp socket instead. Retain current behavior with MSG_WAITALL
flag and otherwise use the hint target for breaking the loop and
returning to application. This is done if currently no ctx->recv_pkt
is ready, otherwise continue to process it from our strparser
backlog.

Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotls: fix use-after-free in tls_push_record
Daniel Borkmann [Fri, 15 Jun 2018 01:07:45 +0000 (03:07 +0200)]
tls: fix use-after-free in tls_push_record

syzkaller managed to trigger a use-after-free in tls like the
following:

  BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls]
  Write of size 1 at addr ffff88037aa08000 by task a.out/2317

  CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144
  Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016
  Call Trace:
   dump_stack+0x71/0xab
   print_address_description+0x6a/0x280
   kasan_report+0x258/0x380
   ? tls_push_record.constprop.15+0x6a2/0x810 [tls]
   tls_push_record.constprop.15+0x6a2/0x810 [tls]
   tls_sw_push_pending_record+0x2e/0x40 [tls]
   tls_sk_proto_close+0x3fe/0x710 [tls]
   ? tcp_check_oom+0x4c0/0x4c0
   ? tls_write_space+0x260/0x260 [tls]
   ? kmem_cache_free+0x88/0x1f0
   inet_release+0xd6/0x1b0
   __sock_release+0xc0/0x240
   sock_close+0x11/0x20
   __fput+0x22d/0x660
   task_work_run+0x114/0x1a0
   do_exit+0x71a/0x2780
   ? mm_update_next_owner+0x650/0x650
   ? handle_mm_fault+0x2f5/0x5f0
   ? __do_page_fault+0x44f/0xa50
   ? mm_fault_error+0x2d0/0x2d0
   do_group_exit+0xde/0x300
   __x64_sys_exit_group+0x3a/0x50
   do_syscall_64+0x9a/0x300
   ? page_fault+0x8/0x30
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happened through fault injection where aead_req allocation in
tls_do_encryption() eventually failed and we returned -ENOMEM from
the function. Turns out that the use-after-free is triggered from
tls_sw_sendmsg() in the second tls_push_record(). The error then
triggers a jump to waiting for memory in sk_stream_wait_memory()
resp. returning immediately in case of MSG_DONTWAIT. What follows is
the trim_both_sgl(sk, orig_size), which drops elements from the sg
list added via tls_sw_sendmsg(). Now the use-after-free gets triggered
when the socket is being closed, where tls_sk_proto_close() callback
is invoked. The tls_complete_pending_work() will figure that there's
a pending closed tls record to be flushed and thus calls into the
tls_push_pending_closed_record() from there. ctx->push_pending_record()
is called from the latter, which is the tls_sw_push_pending_record()
from sw path. This again calls into tls_push_record(). And here the
tls_fill_prepend() will panic since the buffer address has been freed
earlier via trim_both_sgl(). One way to fix it is to move the aead
request allocation out of tls_do_encryption() early into tls_push_record().
This means we don't prep the tls header and advance state to the
TLS_PENDING_CLOSED_RECORD before allocation which could potentially
fail happened. That fixes the issue on my side.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com
Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'l2tp-l2tp_ppp-must-ignore-non-PPP-sessions'
David S. Miller [Fri, 15 Jun 2018 16:12:37 +0000 (09:12 -0700)]
Merge branch 'l2tp-l2tp_ppp-must-ignore-non-PPP-sessions'

Guillaume Nault says:

====================
l2tp: l2tp_ppp must ignore non-PPP sessions

The original L2TP code was written for version 2 of the protocol, which
could only carry PPP sessions. Then L2TPv3 generalised the protocol so that
it could transport different kinds of pseudo-wires. But parts of the
l2tp_ppp module still break in presence of non-PPP sessions.

Assuming L2TPv2 tunnels can only transport PPP sessions is right, but
l2tp_netlink failed to ensure that (fixed in patch 1).
When retrieving a session from an arbitrary tunnel, l2tp_ppp needs to
filter out non-PPP sessions (last occurrence fixed in patch 2).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agol2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
Guillaume Nault [Fri, 15 Jun 2018 13:39:19 +0000 (15:39 +0200)]
l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()

pppol2tp_tunnel_ioctl() can act on an L2TPv3 tunnel, in which case
'session' may be an Ethernet pseudo-wire.

However, pppol2tp_session_ioctl() expects a PPP pseudo-wire, as it
assumes l2tp_session_priv() points to a pppol2tp_session structure. For
an Ethernet pseudo-wire l2tp_session_priv() points to an l2tp_eth_sess
structure instead, making pppol2tp_session_ioctl() access invalid
memory.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agol2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
Guillaume Nault [Fri, 15 Jun 2018 13:39:17 +0000 (15:39 +0200)]
l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels

The /proc/net/pppol2tp handlers (pppol2tp_seq_*()) iterate over all
L2TPv2 tunnels, and rightfully expect that only PPP sessions can be
found there. However, l2tp_netlink accepts creating Ethernet sessions
regardless of the underlying tunnel version.

This confuses pppol2tp_seq_session_show(), which expects that
l2tp_session_priv() returns a pppol2tp_session structure. When the
session is an Ethernet pseudo-wire, a struct l2tp_eth_sess is returned
instead. This leads to invalid memory access when
pppol2tp_session_get_sock() later tries to dereference ps->sk.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'mlxsw-IPv6-and-reference-counting-fixes'
David S. Miller [Fri, 15 Jun 2018 16:11:17 +0000 (09:11 -0700)]
Merge branch 'mlxsw-IPv6-and-reference-counting-fixes'

Ido Schimmel says:

====================
mlxsw: IPv6 and reference counting fixes

The first three patches fix a mismatch between the new IPv6 behavior
introduced in commit f34436a43092 ("net/ipv6: Simplify route replace and
appending into multipath route") and mlxsw. The patches allow the driver
to support multipathing in IPv6 overlays with GRE tunnel devices. A
selftest will be submitted when net-next opens.

The last patch fixes a reference count problem of the port_vlan struct.
I plan to simplify the code in net-next, so that reference counting is
not necessary anymore.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomlxsw: spectrum_switchdev: Fix port_vlan refcounting
Petr Machata [Fri, 15 Jun 2018 13:23:38 +0000 (16:23 +0300)]
mlxsw: spectrum_switchdev: Fix port_vlan refcounting

Switchdev notifications for addition of SWITCHDEV_OBJ_ID_PORT_VLAN are
distributed not only on clean addition, but also when flags on an
existing VLAN are changed. mlxsw_sp_bridge_port_vlan_add() calls
mlxsw_sp_port_vlan_get() to get at the port_vlan in question, which
implicitly references the object. This then leads to discrepancies in
reference counting when the VLAN is removed. spectrum.c warns about the
problem when the module is removed:

[13578.493090] WARNING: CPU: 0 PID: 2454 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2973 mlxsw_sp_port_remove+0xfd/0x110 [mlxsw_spectrum]
[...]
[13578.627106] Call Trace:
[13578.629617]  mlxsw_sp_fini+0x2a/0xe0 [mlxsw_spectrum]
[13578.634748]  mlxsw_core_bus_device_unregister+0x3e/0x130 [mlxsw_core]
[13578.641290]  mlxsw_pci_remove+0x13/0x40 [mlxsw_pci]
[13578.646238]  pci_device_remove+0x31/0xb0
[13578.650244]  device_release_driver_internal+0x14f/0x220
[13578.655562]  driver_detach+0x32/0x70
[13578.659183]  bus_remove_driver+0x47/0xa0
[13578.663134]  pci_unregister_driver+0x1e/0x80
[13578.667486]  mlxsw_sp_module_exit+0xc/0x3fa [mlxsw_spectrum]
[13578.673207]  __x64_sys_delete_module+0x13b/0x1e0
[13578.677888]  ? exit_to_usermode_loop+0x78/0x80
[13578.682374]  do_syscall_64+0x39/0xe0
[13578.685976]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix by putting the port_vlan when mlxsw_sp_port_vlan_bridge_join()
determines it's a flag-only change.

Fixes: b3529af6bb0d ("spectrum: Reference count VLAN entries")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomlxsw: spectrum_router: Align with new route replace logic
Ido Schimmel [Fri, 15 Jun 2018 13:23:37 +0000 (16:23 +0300)]
mlxsw: spectrum_router: Align with new route replace logic

Commit f34436a43092 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route replace logic so that the
first matching route (i.e., same metric) is replaced.

Have mlxsw replace the first matching route as well.

Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomlxsw: spectrum_router: Allow appending to dev-only routes
Ido Schimmel [Fri, 15 Jun 2018 13:23:36 +0000 (16:23 +0300)]
mlxsw: spectrum_router: Allow appending to dev-only routes

Commit f34436a43092 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route append logic so that
dev-only routes can be appended and not only gatewayed routes.

Align mlxsw with the new behaviour.

Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoipv6: Only emit append events for appended routes
Ido Schimmel [Fri, 15 Jun 2018 13:23:35 +0000 (16:23 +0300)]
ipv6: Only emit append events for appended routes

Current code will emit an append event in the FIB notification chain for
any route added with NLM_F_APPEND set, even if the route was not
appended to any existing route.

This is inconsistent with IPv4 where such an event is only emitted when
the new route is appended after an existing one.

Align IPv6 behavior with IPv4, thereby allowing listeners to more easily
handle these events.

Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'mac80211-for-davem-2018-06-15' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Fri, 15 Jun 2018 16:08:26 +0000 (09:08 -0700)]
Merge tag 'mac80211-for-davem-2018-06-15' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A handful of fixes:
 * missing RCU grace period enforcement led to drivers freeing
   data structures before; fix from Dedy Lansky.
 * hwsim module init error paths were messed up; fixed it myself
   after a report from Colin King (who had sent a partial patch)
 * kernel-doc tag errors; fix from Luca Coelho
 * initialize the on-stack sinfo data structure when getting
   station information; fix from Sven Eckelmann
 * TXQ state dumping is now done from init, and when TXQs aren't
   initialized yet at that point, bad things happen, move the
   initialization; fix from Toke Høiland-Jørgensen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agostmmac: added support for 802.1ad vlan stripping
Elad Nachman [Fri, 15 Jun 2018 06:57:39 +0000 (09:57 +0300)]
stmmac: added support for 802.1ad vlan stripping

stmmac reception handler calls stmmac_rx_vlan() to strip the vlan before
calling napi_gro_receive().

The function assumes VLAN tagged frames are always tagged with
802.1Q protocol, and assigns ETH_P_8021Q to the skb by hard-coding
the parameter on call to __vlan_hwaccel_put_tag() .

This causes packets not to be passed to the VLAN slave if it was created
with 802.1AD protocol
(ip link add link eth0 eth0.100 type vlan proto 802.1ad id 100).

This fix passes the protocol from the VLAN header into
__vlan_hwaccel_put_tag() instead of using the hard-coded value of
ETH_P_8021Q.

NETIF_F_HW_VLAN_STAG_RX check was added and the strip action is now
dependent on the correct combination of features and the detected vlan tag.

NETIF_F_HW_VLAN_STAG_RX feature was added to be in line with the driver
actual abilities.

Signed-off-by: Elad Nachman <eladn@gilat.com>
Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoarch/*: Kconfig: fix documentation for NMI watchdog
Mauro Carvalho Chehab [Wed, 9 May 2018 02:44:08 +0000 (23:44 -0300)]
arch/*: Kconfig: fix documentation for NMI watchdog

Changeset 9919cba7ff71 ("watchdog: Update documentation") updated
the documentation, removing the old nmi_watchdog.txt and adding
a file with a new content.

Update Kconfig files accordingly.

Fixes: 9919cba7ff71 ("watchdog: Update documentation")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: crypto_engine.rst: Fix two parse warnings
Mauro Carvalho Chehab [Sun, 6 May 2018 17:30:09 +0000 (14:30 -0300)]
docs: crypto_engine.rst: Fix two parse warnings

./Documentation/crypto/crypto_engine.rst:13: WARNING: Unexpected indentation.
./Documentation/crypto/crypto_engine.rst:15: WARNING: Block quote ends without a blank line; unexpected unindent.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agodocs: can.rst: fix a footnote reference
Mauro Carvalho Chehab [Sun, 6 May 2018 15:00:11 +0000 (12:00 -0300)]
docs: can.rst: fix a footnote reference

As stated at:
http://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html#footnotes

A footnote should contain either a number, a reference or
an auto number, e. g.:
        [1], [#f1] or [#].

While using [*] accidentaly works for html, it fails for other
document outputs. In particular, it causes an error with LaTeX
output, causing all books after networking to not be built.

So, replace it by a valid syntax.

Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
6 years agoafs: Optimise callback breaking by not repeating volume lookup
David Howells [Fri, 15 Jun 2018 14:24:50 +0000 (15:24 +0100)]
afs: Optimise callback breaking by not repeating volume lookup

At the moment, afs_break_callbacks calls afs_break_one_callback() for each
separate FID it was given, and the latter looks up the volume individually
for each one.

However, this is inefficient if two or more FIDs have the same vid as we
could reuse the volume.  This is complicated by cell aliasing whereby we
may have multiple cells sharing a volume and can therefore have multiple
callback interests for any particular volume ID.

At the moment afs_break_one_callback() scans the entire list of volumes
we're getting from a server and breaks the appropriate callback in every
matching volume, regardless of cell.  This scan is done for every FID.

Optimise callback breaking by the following means:

 (1) Sort the FID list by vid so that all FIDs belonging to the same volume
     are clumped together.

     This is done through the use of an indirection table as we cannot do
     an insertion sort on the afs_callback_break array as we decode FIDs
     into it as we subsequently also have to decode callback info into it
     that corresponds by array index only.

     We also don't really want to bubblesort afterwards if we can avoid it.

 (2) Sort the server->cb_interests array by vid so that all the matching
     volumes are grouped together.  This permits the scan to stop after
     finding a record that has a higher vid.

 (3) When breaking FIDs, we try to keep server->cb_break_lock as long as
     possible, caching the start point in the array for that volume group
     as long as possible.

     It might make sense to add another layer in that list and have a
     refcounted volume ID anchor that has the matching interests attached
     to it rather than being in the list.  This would allow the lock to be
     dropped without losing the cursor.

Signed-off-by: David Howells <dhowells@redhat.com>