Andre Heider [Sun, 20 Nov 2022 15:54:59 +0000 (16:54 +0100)]
hostapd: remove an unused function from ubus.c
eee80211_frequency_to_channel() isn't used anymore, which is a leftover from:
2a31e9ca97 "hostapd: add op-class to get_status output"
Signed-off-by: Andre Heider <a.heider@gmail.com>
Felix Fietkau [Tue, 13 Dec 2022 09:25:26 +0000 (10:25 +0100)]
ath9k: add missing dependency on random core
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Christian Marangi [Mon, 12 Dec 2022 22:47:25 +0000 (23:47 +0100)]
generic: move pending 870 ca8210 fix crash patch to backport
Patch got merged upstream in kernel 6.1. Move it to backport to better
track it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 12 Dec 2022 23:15:28 +0000 (00:15 +0100)]
generic: fix wrong PTR_ERR use in of net mac address ascii patch
nvmem_cell_read return a pointer error when an error occurs. Currently
we convert the pointer error to an int while the rest of the function
return a void* and expcet an error pointer. Fix this PTR_ERR msuse
fixing compilation warning.
Fixes the following compilation warning:
net/ethernet/eth.c: In function 'nvmem_cell_get_mac_address':
net/ethernet/eth.c:547:24: warning: returning 'long int' from a function with return type 'void *' makes pointer from integer without a cast [-Wint-conversion]
547 | return PTR_ERR(mac);
| ^~~~~~~~~~~~
net/ethernet/eth.c: In function 'nvmem_cell_get_mac_address_ascii':
net/ethernet/eth.c:564:24: warning: returning 'long int' from a function with return type 'void *' makes pointer from integer without a cast [-Wint-conversion]
564 | return PTR_ERR(mac_ascii);
| ^~~~~~~~~~~~~~~~~~
Fixes: 7b863af180da ("kernel: move mac-address-ascii patches to generic")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Linus Walleij [Sun, 11 Dec 2022 23:54:16 +0000 (00:54 +0100)]
gemini: Set proper default networks
Some Gemini devices are NAS type devices and need to ask for
DHCP IP on eth0. Some has a LAN/WAN setup. Add sensible
defaults for all known devices.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Christian Lamparter [Sat, 3 Dec 2022 21:20:37 +0000 (22:20 +0100)]
uml: switch to Kernel 5.15
Switch over from testing version.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sat, 12 Nov 2022 22:01:33 +0000 (23:01 +0100)]
bcm53xx: remove MR32's openwrt specific patch for LEDs
The patch managed to sneak into v5.15 whereas it was
properly deleted for v5.10.
Fixes: 8f6e2bb17886 ("bcm53xx: remove MR32's specific get_leds_dt code")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Chukun Pan [Fri, 2 Sep 2022 15:18:10 +0000 (23:18 +0800)]
sunxi: fix sunxi-ir kconfig and description
Removed a20 in description, since it
only works for a10, a13 and a31.
Also refreshed kernel config.
Fixes: #10466
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(moved fixes, refreshed, added CONFIG_DVB_USB=n)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Chukun Pan [Thu, 1 Sep 2022 15:18:19 +0000 (23:18 +0800)]
sunxi: modules: remove useless AddDepends/rtc
AddDepends/rtc has been removed in commit
3da7fe6, same here.
Fixes: 3da7fe6 ("kernel: remove useless AddDepends/rtc abstraction")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(RTC_SUPPORT - though this is implied by the TARGET_sunxi)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sat, 1 Oct 2022 21:47:53 +0000 (23:47 +0200)]
sunxi: fix 253-sunxi-h5-add-support-for-nanopi-r1s-h5 patch offset
This showed up in the log:
|Hunk #1 succeeded at 555 (offset -83 lines).
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tony Butler [Mon, 28 Nov 2022 03:14:48 +0000 (19:14 -0800)]
kernel: modules/lib-lz4: add lz4hc_compress
enable option `CONFIG_CRYPTO_LZ4HC` to match default kernel config
this only adds the `lz4hc_compress` module, and has no effect on the
`lz4_decompress` module which already supports any flavor
Signed-off-by: Tony Butler <spudz76@gmail.com>
Tony Butler [Fri, 9 Dec 2022 11:13:16 +0000 (03:13 -0800)]
lantiq: vr9: include usb driver for fritz 7430
Reported by user: missing driver for USB; add to image definition
https://github.com/openwrt/openwrt/issues/11326
Resolves: #11326
Signed-off-by: Tony Butler <spudz76@gmail.com>
Acked-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Hauke Mehrtens [Sun, 11 Dec 2022 15:41:34 +0000 (16:41 +0100)]
kernel: Refresh kernel 5.10
Make the patches apply cleanly again.
Fixes: 8327e0fb72f0 ("kernel: backport the dev_set_threaded export to 5.10")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Sun, 11 Dec 2022 08:48:18 +0000 (09:48 +0100)]
rtl8812au-ct: fix build with newer backports cfg80211 api
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Chukun Pan [Thu, 1 Dec 2022 15:28:38 +0000 (23:28 +0800)]
wolfssl: fix build with /dev/crypto
Backport upstream patch to fix build error when
/dev/crypto enabled.
https://github.com/wolfSSL/wolfssl/commit/
dc9f46a3be00b5e82684a158605189d1278e324c
Fixes: #10944
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Julio Gonzalez Gil [Sun, 14 Aug 2022 21:06:31 +0000 (23:06 +0200)]
umbim: Allow roaming and partner connections
Allow registration if the SIM is roaming or partner mode, by adding two
new options to the protocol.
Until now, such registration failed because umbim returns exit codes 4 and
5 for such situations.
Signed-off-by: Julio Gonzalez Gil <git@juliogonzalez.es>
Weiping Yang [Thu, 8 Dec 2022 04:03:35 +0000 (23:03 -0500)]
ipq40xx: fix usb driver not loaded for GL-A1300
This patch enables USB support for the GL.iNet GL-A1300
Repair the usb driver startup phase is not loaded
Signed-off-by: Weiping Yang <weiping.yang@gl-inet.com>
Nick Hainke [Fri, 9 Dec 2022 19:28:23 +0000 (20:28 +0100)]
libtracefs: update to 1.6.2
378a9dd libtracefs: version 1.6.2
e6daa60 libtracefs: Add unit test to test mounting of tracefs_{tracing,debug}_dir()
32acbbf libtracefs: Have tracefs_{tracing,debug}_dir() mount {tracefs,debugfs} if not mounted
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Thu, 8 Dec 2022 13:49:33 +0000 (08:49 -0500)]
kernel: bump 5.10 to 5.10.158
All patches automatically rebased.
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Tue, 6 Dec 2022 18:22:57 +0000 (13:22 -0500)]
kernel: bump 5.10 to 5.10.157
Manually rebased:
backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch
hack-5.10/645-netfilter-connmark-introduce-set-dscpmark.patch
Removed upstreamed:
pending-5.10/706-netfilter-nf_flow_table-add-missing-locking.patch[1]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.157&id=
b8e494240e69f91517256adcd6fda62d0671772d
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 7 Dec 2022 09:02:49 +0000 (04:02 -0500)]
kernel: add symbol in generic config for 5.10.157
Add CONFIG_INET_TABLE_PERTURB_ORDER=16 to generic config
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Thu, 8 Dec 2022 13:32:44 +0000 (08:32 -0500)]
kernel: bump 5.15 to 5.15.82
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-stock
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-stock
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Mon, 5 Dec 2022 17:33:26 +0000 (12:33 -0500)]
kernel: bump 5.15 to 5.15.81
Manually rebased:
backport-5.15/715-v6.0-net-ethernet-mtk_eth_soc-add-the-capability-to-run-m.patch
hack-5.15/645-netfilter-connmark-introduce-set-dscpmark.patch[1]
Removed upstreamed:
pending-5.15/701-netfilter-nf_flow_table-add-missing-locking.patch[2]
All other patches automatically rebased
1. Rebase by Kevin 'ldir' Darbyshire-Bryant<ldir@darbyshire-bryant.me.uk>
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.81&id=
8db9e60cdfdae5b049e32e82323da8f0f989066a
Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-stock
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-stock
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Mon, 5 Dec 2022 17:48:35 +0000 (12:48 -0500)]
kernel: add symbol in generic config for 5.15.81
Add CONFIG_INET_TABLE_PERTURB_ORDER=16 to generic config
Signed-off-by: John Audia <therealgraysky@proton.me>
Felix Fietkau [Sat, 10 Dec 2022 16:36:07 +0000 (17:36 +0100)]
kernel: backport the dev_set_threaded export to 5.10
Fixes mt76 build error
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 10 Dec 2022 16:30:34 +0000 (17:30 +0100)]
kernel: backport mtk_wed.h from 5.15 to 5.10
Fixes mt76 build error
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 10 Dec 2022 12:22:32 +0000 (13:22 +0100)]
mt76: update to the latest version
ec46d7486ab9 sync with upstream
2575de3aea33 wifi: mt76: mt7921: introduce chanctx support
473cebb3c3e1 wifi: mt76: fix bandwidth 80MHz link fail in 6GHz band
de3e77227f62 wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices
f0c191a9f6cd wifi: mt76: mt7996: add missing argument in mt7996_queue_rx_skb()
d3838a52df62 wifi: mt76: mt7996: enable use_cts_prot support
98492dff3bec wifi: mt76: mt7996: enable ack signal support
2a41e7a82f86 wifi: mt76: mt7996: add support to configure spatial reuse parameter set
194cb3392829 mt76: mt7915: add missing of_node_put()
f91d6f3b73ac wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host
1ce4970d799f wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks
379f3fc0fc43 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_ie_countdown()
233c272f0f86 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_rx_radar_detected()
5616c4cc1d5d wifi: mt76: mt7996: fix integer handling issue of mt7996_rf_regval_set()
f9598e6d4c2c wifi: mt76: mt7915: split mcu chan_mib array up
b252d94bd763 wifi: mt76: mt7915: check return value before accessing free_block_num
f1cc3696d725 wifi: mt76: mt7996: check return value before accessing free_block_num
b94ba58fa698 wifi: mt76: mt7915: check the correctness of event data
35843a1670c0 wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr()
01a256c1dc41 wifi: mt76: mt7996: drop always true condition of __mt7996_reg_addr()
5185bbab8953 wifi: mt76: mt7996: fix endianness warning in mt7996_mcu_sta_he_tlv
eeb6949c4d06 wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power
063823aba978 wifi: mt76: mt7921: add support to update fw capability with MTFG table
a44109267e4e wifi: mt76: mt7996: fix unintended sign extension of mt7996_hw_queue_read()
be5dbb781068 wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read()
adf9042b6f63 wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans()
551201379efe wifi: mt76: move leds field in leds struct
14fbb6d6e85e wifi: mt76: move leds struct in mt76_phy
81edc468fc62 wifi: mt76: mt7915: enable per-phy led support
bbad827e447f wifi: mt76: mt7615: enable per-phy led support
8e7e7e52fc09 wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
95c66d651133 wifi: mt76: handle possible mt76_rx_token_consume failures
52d04463a66e wifi: mt76: dma: rely on queue page_frag_cache for wed rx queues
7fae1de12ae7 wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 10 Dec 2022 11:36:44 +0000 (12:36 +0100)]
mac80211: update to linux 6.1-rc8
This should help stay in sync with upstream development
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 10 Dec 2022 12:17:56 +0000 (13:17 +0100)]
mt76: update to version 2022-12-01
3deafbad7061 wifi: mt76: mt7915: fix uninitialized irq_mask
6ca31dc64da4 wifi: mt76: mt7921: introduce remain_on_channel support
7962005b0734 wifi: mt76: connac: rework macros for unified command
3b2882ca704e wifi: mt76: connac: update struct sta_rec_phy
c4d46cb1dd45 wifi: mt76: connac: rework fields for larger bandwidth support in sta_rec_bf
532c322fd72f wifi: mt76: connac: add more unified command IDs
4c43e060726b wifi: mt76: connac: introduce unified event table
4c423058920d wifi: mt76: connac: add more bss info command tags
143d7ab8ef92 wifi: mt76: connac: add more starec command tags
733ef9887b2c wifi: mt76: connac: introduce helper for mt7996 chipset
8e309b5560e1 wifi: mt76: mt7921: fix wrong power after multiple SAR set
d791ed1f5877 wifi: mt76: mt7915: add missing MODULE_PARM_DESC
3b8eed9c3866 wifi: mt76: mt7915: add support to configure spatial reuse parameter set
417cca39bab2 wifi: mt76: introduce rxwi and rx token utility routines
629f8631f54f wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf
13c2dc8993b6 wifi: mt76: add WED RX support to mt76_dma_rx_fill
86e94f4162b7 wifi: mt76: add WED RX support to dma queue alloc
1361519851f3 wifi: mt76: add info parameter to rx_skb signature
a2e5e0667553 wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine
f38faf294310 wifi: mt76: mt7915: enable WED RX support
a887a5feb3d1 wifi: mt76: mt7915: enable WED RX stats
4c23061ebcfc wifi: mt76: mt7915: add basedband Txpower info into debugfs
a9c88ded5cac wifi: mt76: mt7915: enable .sta_set_txpwr support
2c172bb6cd9f wifi: mt76: mt7915: fix band_idx usage
1b88dd07f153 linux-firmware: update firmware for MT7915
6196f6080506 linux-firmware: update firmware for MT7916
daae6ca5d81f linux-firmware: update firmware for MT7986
e7a9f7a0440c wifi: mt76: mt7915: fix unused-but-set warning
340f3be65397 wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
aa7132da0326 wifi: mt76: mt7915: fix endianness of mt7915_mcu_set_obss_spr_pd()
a36017d09324 wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc
66dc48bea883 wifi: mt76: do not send firmware FW_FEATURE_NON_DL region
fa79eeeadc2d mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2()
ff94604b2edd wifi: mt76: mt7915: introduce mt7915_get_power_bound()
5082a58f8082 wifi: mt76: mt7915: enable per bandwidth power limit support
a7b915302147 wifi: mt76: mt7915: fix scene detection flow of spatial reuse
525592c28d6b wifi: mt76: mt7915: rely on band_idx of mt76_phy
cdd7229e769b wifi: mt76: mt7915: mmio: fix naming convention
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 4 Dec 2022 18:35:36 +0000 (19:35 +0100)]
hostapd: use wpa_supplicant for unencrypted mesh connections
It's more reliable than using iw
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Bauer [Fri, 9 Dec 2022 00:58:03 +0000 (01:58 +0100)]
ath79: fix Teltonika RUT230 v1 MAC assignment
The MAC-Address setup for the Teltonika RUT230 v1 was swapped for the
LAN / WAN ports. Also the Label-MAC was assigned incorrect, as the WiFi
MAC is printed on the case as part of the SSID, however only the LAN
MAC-Address is designated as a MAC-Address.
Signed-off-by: David Bauer <mail@david-bauer.net>
Jan-Niklas Burfeind [Fri, 2 Dec 2022 13:55:16 +0000 (14:55 +0100)]
realtek: update GPIO bindings for DGS-1210-10P
add three missing LEDs
- PoE-Max
- Link/Act
- PoE
add two missing buttons
- mode
- reset
The last was dropped in
commit
61a3d0075b15 ("realtek: update GPIO bindings in the dts files in dts-5.10")
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Andreas Böhler [Sat, 19 Nov 2022 23:43:50 +0000 (00:43 +0100)]
realtek: d-link: add support for dgs-1210-28mp-f
General hardware info:
----------------------
D-Link DGS-1210-28MP rev. F1 is a switch with 24 ethernet ports and 4
combo ports, all ports Gbit capable. It is based on a RTL8382 SoC @ 500MHz,
DRAM 128MB and 32MB flash. 24 ethernet ports are 802.3af/at PoE capable
with a total PoE power budget of 370W.
Power over Ethernet:
--------------------
The PSE hardware consists of three BCM59121 PSE chips, serving 8 ports
each. They are controlled by a Nuvoton MCU.
In order to enable PoE, the realtek-poe package is required. It is
installed by default, but currently it requires the manual editing of
/etc/config/poe. Keep in mind that the port number assignment does not
match on this switch, alway 8 ports are in reversed order: 8-1, 16-9 and
24-17.
LEDs and Buttons:
-----------------
On stock firmware, the mode button is supposed to switch the LED indicators
of all port LEDs between Link Activity and PoE status. The currently
selected mode is visualized using the respective LEDs. PoE Max indicates
that the maximum PoE budget has been reached.
Since there is currently no support for this behavior, these LEDs and
the mode button can be used independently.
Serial connection:
------------------
The UART for the SoC (115200 8N1) is available via unpopulated standard
0.1" pin header marked J6. Pin1 is marked with arrow and square.
Pin 1: Vcc 3.3V
Pin 2: Tx
Pin 3: Rx
Pin 4: Gnd
OEM installation from Web Interface:
------------------------------------
1. Make sure you are booting using OEM in image 2 slot. If not, switch to
image2 using the menus
System > Firmware Information > Boot from image2
Tools > reboot
2. Upload image in vendor firmware via Tools > Backup / Upgrade
Firmware > image1
3. Toogle startup image via System > Firmware Information > Boot from
image1
4. Tools > reboot
Other installation methods not tested, but since the device shares the
board with the DGS-1210-28, the following should work:
Boot initramfs image from U-Boot:
---------------------------------
1. Press Escape key during `Hit Esc key to stop autoboot` prompt
2. Press CTRL+C keys to get into real U-Boot prompt
3. Init network with `rtk network on` command
4. Load image with `tftpboot 0x8f000000
openwrt-rtl838x-generic-d-link_dgs-1210-28mp-f-initramfs-kernel.bin`
command
5. Boot the image with `bootm` command
Signed-off-by: Andreas Böhler <dev@aboehler.at>
Rafał Miłecki [Thu, 8 Dec 2022 11:01:43 +0000 (12:01 +0100)]
uboot-bcm4908: update to the latest generic
4435700d18 Remove redundant YYLOC global declaration
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hauke Mehrtens [Thu, 8 Dec 2022 00:15:11 +0000 (01:15 +0100)]
ustream-ssl: update to Git version 2022-12-07
9217ab4 ustream-openssl: Disable renegotiation in TLSv1.2 and earlier
2ce1d48 ci: fix building with i.MX6 SDK
584f1f6 ustream-openssl: wolfSSL: provide detailed information in debug builds
aa8c48e cmake: add a possibility to set library version
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Christian Marangi [Wed, 7 Dec 2022 17:12:31 +0000 (18:12 +0100)]
CI: kernel: don't checkout and install feeds
We don't need to checkout feed and install feeds for kernel tests. This
saves up to 2 minutes for each target kernel build test.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Wed, 7 Dec 2022 17:09:18 +0000 (18:09 +0100)]
CI: build: skip sdk adapt to external toolchain on cache hit
On cache hit, skip sdk adapt to external toolchain. This is needed because we
cache the already extracted sdk and that is already adapted to be used
as external toolchain.
Rerunning the adap step will result in the test to fail for missing file
as the file are already got wrapped to the external toolchain format.
Fixes: 42f0ab028e2e ("CI: build: fix use of sdk as toolchain")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Jan-Niklas Burfeind [Wed, 30 Nov 2022 20:35:30 +0000 (21:35 +0100)]
ramips: add support for Wavlink WS-WN572HP3 4G
Wavlink WS-WN572HP3 4G is an 802.11ac
dual-band outdoor router with LTE support.
Specifications;
* Soc: MT7621DAT
* RAM: 128MiB
* Flash: NOR 16MiB GD-25Q128ESIG3
* Wi-Fi:
* MT7613BEN: 5GHz
* MT7603EN: 2.4GHz
* Ethernet: 2x 1GbE
* USB: None - only used internally
* LTE Modem: Quectel EC200T-EU
* UART: 115200 baud
* LEDs:
* 7 blue at the front
* 1 Power
* 2 LAN / WAN
* 1 Status
* 3 RSSI (annotated 4G)
* 1 green at the bottom (4G LED)
* Buttons: 1 reset button
Installation:
* press and hold the reset button while powering on the device
* keep it pressed for ten seconds
* connect to 192.168.10.1 via webbrowser (chromium/chrome works, at
least Firefox 106.0.3 does not)
* upload the sysupgrade image, confirm the checksum, wait 2 minutes
until the device reboots
Revert to stock firmware:
* same as installation but use the recovery image for WL-WN572HP3
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Jan-Niklas Burfeind [Wed, 30 Nov 2022 20:35:29 +0000 (21:35 +0100)]
comgt-ncm: add support for quectel modem EC200T-EU
context_type is an integer mapping of pdptype:
1: IPV4
2: IPV6
3: IPV4V6
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
David Bauer [Thu, 17 Nov 2022 21:48:10 +0000 (22:48 +0100)]
ramips: define loadaddr for all UniFi devices
Define the load-address for the DTB of all Ubiquiti UniFi devices using
FIT images. From the GPL code we can assume these boards are affected by
the same relocating issue with the vendor bootloader.
Signed-off-by: David Bauer <mail@david-bauer.net>
Andre Heider [Wed, 15 Dec 2021 11:48:26 +0000 (12:48 +0100)]
fritz-tools: fritz_tffs_nand: cache already read sector ids
This speeds up the tool significantly, especially when using the "-a"
argument.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Wed, 15 Dec 2021 11:21:48 +0000 (12:21 +0100)]
fritz-tools: fritz_tffs_nand: get rid of struct tffs_sectors
This doesn't help and "[0]" gets in the way of bounds checks.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Wed, 15 Dec 2021 10:38:20 +0000 (11:38 +0100)]
fritz-tools: fritz_tffs_nand: exclude oob code when disabled
Skip unnecessary stuff if checking the oob data is disabled.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Jo-Philipp Wich [Wed, 7 Dec 2022 07:54:56 +0000 (08:54 +0100)]
firewall4: add missing PKG_MIRROR_HASH
Fixes: 84183f0d98 ("firewall4: update to latest Git HEAD")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Daniel Golle [Wed, 7 Dec 2022 01:42:53 +0000 (01:42 +0000)]
mediatek: also move &slot0 from dtsi down to board dts
As the referenced MTD partition is only present in the dts, also move
&slot0 down to the dts files.
Fixes: 64e9b62829 ("mediatek: remove redundant flash entry from dtsi")
Fixes: 7dbac3433f ("mediatek: add support for reyee AX3200-E5")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 7 Dec 2022 00:34:55 +0000 (00:34 +0000)]
mediatek: remove redundant flash entry from dtsi
Splitting-off the common parts of Ruijie RG-EW3200GX PRO and
reyee AX3200-E5 went wrong because the flash descriptiom was kept
also in the dtsi. Remove it there, as flash definition is added by
both board dts files.
Fixes: 7dbac3433f ("mediatek: add support for reyee AX3200-E5")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tony Butler [Fri, 2 Dec 2022 20:05:08 +0000 (12:05 -0800)]
build: add gzip to prereq-build.mk
gzip has never been checked for, a system without it would be rare, fix
it anyway
Signed-off-by: Tony Butler <spudz76@gmail.com>
Christian Marangi [Mon, 5 Dec 2022 22:23:04 +0000 (23:23 +0100)]
CI: build: fix use of sdk as toolchain
The toolchain included in a sdk have a different format than an external
toolchain tar.
Since sdk is a more integrated setup doesn't use and include wrapper bin
that use the external toolchain config and use an alternative and more
standard way to include all the toolchain headers.
External toolchain use wrapper.sh to append the configured include
header when each tool is called.
Fix the sdk toolchain by reverting their own sdk wrapper scripts and to
simulate an external toolchain build copying what is done in the
toolchain target makefile.
This handle compilation error and warning caused by not using fortify
header on building packages.
Fixes: 006e52545d14 ("CI: build: add support to fallback to sdk for external toolchain")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tony Butler [Mon, 28 Nov 2022 12:00:02 +0000 (04:00 -0800)]
build: images: squashfs: add help, fix description
add help text for `TARGET_SQUASHFS_BLOCK_SIZE` to match the only valid
settings accepted by `mksquashfs4` ("block size not power of two or not
between 4096 and 1Mbyte") thus for this setting in "KB", the set:
`4, 8, 16, 32, 64, 128, 256, 512, 1024`
replace `squashfs-lzma` with `squashfs` in the description for
`TARGET_ROOTFS_SQUASHFS` because it has various compressions, and not
just lzma as it did in the past
cosmetic change with no functional effect
Signed-off-by: Tony Butler <spudz76@gmail.com>
Shiji Yang [Tue, 29 Nov 2022 10:13:38 +0000 (18:13 +0800)]
ath79: optimize the firmware recipe for Netgear NAND devices
1. Drop useless character '0xff' before fake filesystem header.
2. Reduce useless padding to shrink the size of the sysupgrade image.
3. Do not check the size of sysupgrade image. It does not make sense to
check the size of a compressed package.
4. Do not take the size of netgear header into account because it will
not be written to Flash.
5. Use the default lzma compression dictionary parameter '-d24' to get
better performance.
Tested on Netgear R6100
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Tue, 29 Nov 2022 10:13:19 +0000 (18:13 +0800)]
ath79: convert Netgear R6100 radio calibration to nvmem-cells
use nvmem-cells implementation to avoid copying art calibration data
to rootfs.
Tested on Netgear R6100
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Hannu Nyman [Tue, 6 Dec 2022 10:33:58 +0000 (12:33 +0200)]
tools/cmake: update to 3.25.1
Update cmake to version 3.25.1
* refresh patches
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Hauke Mehrtens [Sun, 20 Nov 2022 20:35:54 +0000 (21:35 +0100)]
kernel: ca8210: Fix crash by zero initializing data
This fixes crashes at bootup on pistachio.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 5 Dec 2022 23:17:35 +0000 (00:17 +0100)]
e2fsprogs: Fix CVE-2022-1304
This fixes CVE-2022-1304:
An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5.
This issue leads to a segmentation fault and possibly arbitrary code
execution via a specially crafted filesystem.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Alex Hansen [Thu, 13 Oct 2022 18:36:40 +0000 (14:36 -0400)]
mediatek: add support for reyee AX3200-E5
This is yet another model of the Ruijie RG-EW3200GX PRO with a slightly
different flash layout, install process is the same.
Specifications:
SoC: MT7622B
RAM: 256MB
Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR
Ethernet: 5x1GbE
Switch: MT7531BE
WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN
3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red)
2Keys: Mesh button + Reset button
UART: Marked J19 on board. 3.3v, 115200n1
Power: 12V 2.5A
Flash instruction:
1. Serve the initramfs.img using a TFTP server with address 10.10.10.3.
2. Interrupt the uboot startup process via UART.
3. Select "System Load Linux to SDRAM via TFTP" item.
4. (important) Back up firmware(mtd7) partitions with:
dd if=/dev/mtd7 of=/tmp/firmware.bin
and then download the firmware.bin image via SCP.
5. Flash the OpenWrt sysupgrade firmware.
Recovery stock firmware:
1. Transfer the firmware.bin image to the device.
2. Flash the image with:
mtd write firmware.bin firmware
Signed-off-by: Alex Hansen <mralexh123@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Jo-Philipp Wich [Mon, 5 Dec 2022 14:58:41 +0000 (15:58 +0100)]
firewall4: update to latest Git HEAD
700a925 fw4: prevent null access when no ipsets are defined
6443ec7 config: drop input traffic by default
119ee1a ruleset: drop ctstate invalid traffic for masq-enabled zones
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 23 Nov 2022 13:15:19 +0000 (14:15 +0100)]
ucode: update to latest Git HEAD
46d93c9 tests: fixup testcases
4c654df types: adjust double printing format
eac2add compiler: fix bytecode for logical assignments of properties
3903b18 fs: add `realpath()` function
8366102 math: add isnan() function
eef83d3 tests: relax sleep() test
394e901 lib: uc_json(): accept trailing whitespace when parsing strings
1867c8b uloop: terminate parent uloop in task child processes
d2cc003 uci: auto-load package in `ctx.foreach()` and `ctx.get_first()`
6c5ee53 compiler: ensure that arrow functions with block bodies return no value
fdc9b6a compiler: fix `??=`, `||=` and `&&=` logical assignment semantics
88dcca7 add cmake to install requires for debian
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Joonhyuk Song [Mon, 21 Nov 2022 02:37:36 +0000 (11:37 +0900)]
ramips: mt7621: enable lzma-loader for netis WF2881
Fixes boot loader LZMA decompression issues (LZMA ERROR 1)
Signed-off-by: Joonhyuk Song <thenoface303@gmail.com>
John Thomson [Wed, 9 Nov 2022 23:55:11 +0000 (09:55 +1000)]
ramips: mt7621: mikrotik 760igs (hEX S) fix SFP
This device uses an AR8031/AR8033 chip to convert SoC gmac1
RGMII to 1000base-x or sgmii for the SFP fibre cage.
The SFP cage requires phy-mode rgmii-rxid, and without it will not
recieve any packets: ethtool -S sfp rx_fcs_errors will increase when
packets should be being received, but no other _rx counters will change.
Fixes: c77858aa792 ("ramips: mt7621-dts: change phy-mode of gmac1 to rgmii")
Reviewed-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Daniel Golle [Mon, 5 Dec 2022 23:10:29 +0000 (23:10 +0000)]
mediatek: mt7623: build mt6577_auxadc driver into kernel
Set CONFIG_MT6577_AUXADC=y as otherwise reading temperature of the
thermal-zone doesn't work on MT7623 (it does work fine without this
driver on MT7622 and MT7986).
Fixes: f2ae4e2f8c ("mediatek: clean up platform kernel modules")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 2 Dec 2022 12:54:52 +0000 (12:54 +0000)]
trusted-firmware-a.mk: fix build with binutils 2.39
Starting from version 2.39 binutils now warns about sections with rwx
permissions. While this is generally desirable it breaks building
ARM TrustedFirmware-A bl2 which treats warnings as errors.
Disable the warning/error for now to fix build.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
INAGAKI Hiroshi [Wed, 30 Nov 2022 13:10:57 +0000 (22:10 +0900)]
ramips: use ARTIFACTS for initramfs-factory of I-O DATA WN-AX1167GR
Use ARTIFACTS to generate initramfs-based factory image of I-O DATA
WN-AX1167GR instead of redundant recipe which generate on
KERNEL_INITRAMFS.
Note:
WN-AX1167GR has 2x OS images on stock firmware.
stock log:
flash manufacture id: c2, device id 20 18
MX25L12805D(c2
2018c220) (16384 Kbytes)
mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
Creating 10 MTD partitions on "raspi":
0x000000000000-0x000001000000 : "ALL"
0x000000000000-0x000000030000 : "Bootloader"
0x000000030000-0x000000040000 : "Config "
0x000000040000-0x000000050000 : "Factory"
0x000000050000-0x000000060000 : "iNIC_rf"
0x000000060000-0x0000007e0000 : "Kernel"
0x000000800000-0x000000f80000 : "app"
0x000000f90000-0x000000fa0000 : "Key"
0x000000fa0000-0x000000fb0000 : "backup"
0x000000fb0000-0x000001000000 : "storage"
1st image is "Kernel" and 2nd is "app" when booted from 1st image.
In OpenWrt, those 2x partitions are combined to "firmware" with
undefined (empty) areas (0x7e0000-0x7fffff, 0xf80000-0xf8ffff).
The size of an OS image partition is 0x780000 (7680 KiB = 7.5 MiB), so
check-size for initramfs-factory image needs to be called with the size.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Daniel Golle [Tue, 29 Nov 2022 15:26:25 +0000 (15:26 +0000)]
build: make sure that $(STAGING_DIR_IMAGE) exists
Call 'mkdir -p $(STAGING_DIR_IMAGE)' before trying to store files in
this potentially non-existing folder.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Christian Marangi [Sun, 4 Dec 2022 19:58:11 +0000 (20:58 +0100)]
CI: trigger check also on build and check-kernel-patches workflow change
Since kernel and packages workflow now use a shared build workflow, they
also need to react on changes on these shared workflow.
Fix this and add these shared workflow to the event paths to check.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 4 Dec 2022 19:36:11 +0000 (20:36 +0100)]
CI: build: fix matching for openwrt release branch for toolchain parsing
The current match logic doesn't handle test for push events related to
stable release (example openwrt-22.03) but only fork with the related
prefix (example openwrt-22.03-fixup)
Fix wrong matching and while at it also add extra checks to other
matching (check if the branch name actually start with the requested
prefix)
Fixes: e24a1e6f6d7f ("CI: build: add support for external toolchains from stable branch")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 4 Dec 2022 19:28:28 +0000 (20:28 +0100)]
CI: fix matching for openwrt release branch for container selection
The current match logic doesn't handle test for push events related to
stable release (example openwrt-22.03) but only fork with the related
prefix (example openwrt-22.03-fixup)
Fix wrong matching and while at it also add extra checks to other
matching (check if the branch name actually start with the requested
prefix)
Fixes: abe8a4824210 ("CI: build: add support for per branch tools container")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 28 Nov 2022 15:12:13 +0000 (16:12 +0100)]
CI: build: add support to fallback to sdk for external toolchain
Add support to use sdk as external toolchain if the packaged external
toolchain tar is not found on openwrt servers for build shared workflow.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 28 Nov 2022 11:44:01 +0000 (12:44 +0100)]
CI: build: add support for external toolchains from stable branch
Add support to use external toolchains from stable branch if we are
testing commit targeting stable openwrt branch in kernel and packages
workflow.
With pr the target branch is parsed and the right toolchain is used.
To use the stable toolchain for local testing the branch needs to have
the prefix openwrt-[0-9][0-9].[0-9][0-9]- (example openwrt-21.02-fixup)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 27 Nov 2022 18:53:08 +0000 (19:53 +0100)]
CI: build: add support for per branch tools container
Add support in build shared workflow for per branch tools container.
With pr the target branch is parsed and the right container is used.
To use the stable container for local testing the branch needs to have
the prefix openwrt-[0-9][0-9].[0-9][0-9]- (example openwrt-21.02-fixup)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 27 Nov 2022 18:45:38 +0000 (19:45 +0100)]
CI: tools: support per branch tools container
Add support to push per branch container tools.
For anything not official stick to latest tag that correspond to test
run from master.
If we are testing something for one of the openwrt stable branch, parse
the branch name or the tag and push dedicated tools containers.
To use the stable container for local testing the branch needs to have
the prefix openwrt-[0-9][0-9].[0-9][0-9] (example openwrt-21.02-fixup)
Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9]
will refresh the tools container with the matching tag.
(example branch openwrt-22.03 -> tools:openwrt-22.03)
(example branch openwrt-22.03-test -> tools:openwrt-22.03)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 29 Nov 2022 18:39:04 +0000 (19:39 +0100)]
iucode-tool: fix compile error with musl libc and USE_CPUID_DEVICE
Add patch to fix compilation error with USE_CPUID_DEVICE enabled and musl
used as libc. Musl doesn't add limits.h header by default and this is
required if USE_CPUID_DEVICE is used.
The package currently compile because fortify headers include limits.h
by default.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Senis John [Sat, 19 Nov 2022 03:30:54 +0000 (11:30 +0800)]
ramips: add support for HiWiFi HC5611
CPU: MediaTek MT7628AN @ 575 MHz
Flash: 16 MB
RAM: 128 MB
Ethernet: 10/100Mbps x 1
Wlan: 300 Mbps
USB: USB 2.0 x 1
LED: red/green x 1
Button: reset x 1
1. Open https://www.hiwifi.wtf/, Get Cloud token and unlock ssh
2. Upload the openwrt firmware to the router via SCP
3. Login the router via SSH
4. Run `mtd -r write path_to_firmware.bin firmware`
I have tested on my device.
- The LED will display RED on power-on, After system start completed, trun GREEN
- Reset button working now. Long press after 5s will reset factory. Short press less 1s will reboot the device
- USB can working under official u-boot
Signed-off-by: Senis John <thank243@gmail.com>
Kien Truong [Mon, 3 Oct 2022 11:51:40 +0000 (18:51 +0700)]
rockchip: enable watchdog driver
Enable Synopsys DesignWare watchdog driver for rockchip device
Tested on NanoPi R2S
Signed-off-by: Kien Truong <duckientruong@gmail.com>
Petr Štetiar [Sun, 4 Dec 2022 07:08:24 +0000 (08:08 +0100)]
Revert "mvebu: switch default kernel to 5.15"
This reverts commit
5429411f732ba76eced30b5b596ec9c0374d0965 as upstream
in commit
e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") has
changed `PTP_1588_CLOCK` dependency handling in 5.15 kernel.
That currently leads to `CONFIG_NET_DSA_MV88E6XXX=m` in images produced
by buildbots due to `CONFIG_ALL_KMODS=y` config option being used in
those builds, which leads to a broken LAN bridge network on several
devices.
References: https://lists.infradead.org/pipermail/openwrt-devel/2022-December/039950.html
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Bjørn Mork [Mon, 28 Nov 2022 14:45:12 +0000 (15:45 +0100)]
ramips: mt7621: enable lzma-loader for ZyXEL WAP6805
Fixing "Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board
to recover".
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Tony Butler [Mon, 28 Nov 2022 12:05:30 +0000 (04:05 -0800)]
build: config: cleanup impossible dependency logic
some config `depends on` lines contained outdated kernel version checks
that can no longer happen and had become non-operational; clean them up
cosmetic change with no functional effect
Signed-off-by: Tony Butler <spudz76@gmail.com>
Nick Hainke [Fri, 2 Dec 2022 21:20:07 +0000 (22:20 +0100)]
tools/xz: update to 5.2.9
Update to latest release.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Hauke Mehrtens [Sun, 27 Nov 2022 18:51:44 +0000 (19:51 +0100)]
mac80211: Update to version 5.15.81
The removed patches were applied upstream.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 3 Dec 2022 02:04:40 +0000 (03:04 +0100)]
CI: Build all boards and testing kernel
This adds options to build all boards of a selected target and an
additional option to build the testing kernel instead of the normal
kernel. This can be used by other trigger work flows.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 5 Nov 2022 13:27:11 +0000 (14:27 +0100)]
CI: Allow building with internal toolchain
This adds an option to build with internal toolchain. This can be used
to build targets which are currently not build by the OpenWrt build bots
and which needs their own toolchain build for every build.
Building the toolchain takes about 30 minutes compared to using the
external toolchain which takes some seconds.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Tue, 1 Nov 2022 18:10:01 +0000 (19:10 +0100)]
CI: Extract the OpenWrt building to own sub workflow
Extract the building of OpenWrt into an own workflow which is then
triggered by the kernel.yml and packages.yml workflow with different
inputs. This allows us to share much of the code of the workflow.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 5 Nov 2022 13:38:35 +0000 (14:38 +0100)]
CI: Simplify if conditions
There is no need to put a ${{ }} around the if conditions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Stijn Segers [Fri, 2 Dec 2022 12:36:20 +0000 (13:36 +0100)]
mvebu: switch default kernel to 5.15
In light of https://github.com/openwrt/openwrt/issues/11077, switch mvebu
to 5.15 which has been the testing kernel on this target since April - over
half a year.
Run-tested on the following subtargets:
* cortexa9 (Turris Omnia -
03f41b1eb2f15ab06d5800274be6a67c64e2a629)
* cortexa72 (MikroTik RB5009UG+S+IN)
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com> [GL-MV1000]
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Jan-Niklas Burfeind [Mon, 28 Nov 2022 16:58:17 +0000 (17:58 +0100)]
realtek: fix dell typo
should be add/delete or abbreviated add/del
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Luiz Angelo Daros de Luca [Mon, 7 Nov 2022 23:10:08 +0000 (20:10 -0300)]
realtek: refactor keep vlan tag setup, fix tagged forwarding
The code in dsa.c:rtl83xx_port_enable() was trying to set
vlan_port_tag_sts_ctrl while dealing with differences between SoCs.
However, not only that register has a different address, the register
structure and even the 2-bit value semantic changes for each SoC.
The vlan_port_tag_sts_ctrl field was dropped and converted into a
vlan_port_keep_incoming_tag_set() function that abstracts the different
between SoCs. The macro referencing that register migrated to the SoC
specific c file as it will be privately used by each file.
All magic numbers were converted into macros using BITMASK and
FIELD_PREP.
The vlan_port_tag_sts_ctrl debugfs was dropped for now as it is already
broken for rtl93xx. The best place for SoC specific code might be in each
respective c file and not in if/else clauses.
The final result is:
rtl838x: set ITAG_STS=TAGGED, same as before
rtl839x: set ITAG_STS=TAGGED instead of IGR_P_ITAG_KEEP=0x1, fixing
forwarding of tagged packets
rtl930x: set EGR_ITAG_STS=TAGGED instead of IGR_P_ITAG=0x1, possibly
fixing forwarding of tagged packets
rtl931x: set EGR_ITAG_STS=TAGGED instead of OTPID_KEEP=0x1, possibly
fixing forwarding of tagged packets
Without (EGR_)ITAG_STS=TAGGED, at least for rtl839x, forwarded packets
will drop the vlan tag while packets from the CPU will still have the
correct tag.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Olliver Schinagl [Mon, 31 Oct 2022 13:02:52 +0000 (14:02 +0100)]
realtek: Fix rtl930x speed status accessor
The rtl930x speed status registers require 4 bits to indicate the speed
status. As such, we want to divide by 8. To make things consistent with
the rest of this code, use a bitshift however.
This bug probably won't affect many users yet, as there aren't many
rtl930x switches in the wild yet with more then 10 ports, and thus a
low-impact bugfix.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
[also fix port field extraction]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Christian Marangi [Thu, 1 Dec 2022 00:46:03 +0000 (01:46 +0100)]
CI: labeler: fix wrong label for pr targeting stable branch
The label used for stable branch is in the form of
release/[0-9][0-9].[0-9][0-9]
Currently we apply the name of the target branch as the label, fix this
and correctly use the current label.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 29 Nov 2022 18:53:23 +0000 (19:53 +0100)]
CI: add support to tag pr targeting stable branch
Add support to tag pr targeting stable branch matching the simple regex
of openwrt-[0-9][0-9].[0-9][0-9]. The tag that will be added will match
the pr target branch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Golle [Tue, 29 Nov 2022 19:38:21 +0000 (19:38 +0000)]
uboot-mediatek: bpi-r3: raise CONFIG_LMB_MAX_REGIONS to 64
Raise CONFIG_LMB_MAX_REGIONS to 64 as there are going to be more than
8 (the default value) reserved regions to allow supporting offloading
Wireless-to-Ethernet traffic on MT7986.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 27 Nov 2022 12:33:31 +0000 (12:33 +0000)]
dnsmasq: add option to expose additional paths to jail
Add new UCI list 'addn_mount' allowing the expose additional filesystem
paths to the jailed dnsmasq process. This is useful e.g. in case of
manually configured includes to the configuration file or symlinks
pointing outside of the exposed paths as used by e.g. the safe-search
package in the packages feed.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Alexander Couzens [Sat, 12 Nov 2022 12:13:46 +0000 (12:13 +0000)]
ipq40xx: add support for Mikrotik wAP R ac / LTE / LTE6
The Mikrotik wAP R AC is an outdoor, dual band, dual radio (802.11ac) AP
with a miniPCIe slot for a LTE modem.
The wAP R AC is similar to the wAP AC but with the miniPCIe slot.
The wAP R AC requires installing a LTE modem.
The wAP LTE and wAP LTE6 comes with a LTE modem installed.
See https://mikrotik.com/product/wap_r_ac for more info.
Specifications:
- SoC: Qualcomm Atheros IPQ4018
- CPU: 4x ARM Cortex A7
- RAM: 128MB
- Storage: 16MB NOR flash
- Wireless:
- Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, internal antenna
- Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, internal antenna
- Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 ports
one with 802.3af/at PoE in
- 1x Mini PCI-E port (USB2)
Installation:
Boot the initramfs image via TFTP, then flash the sysupgrade image using
sysupgrade. Details at https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Aleksander Jan Bajkowski [Sat, 15 Oct 2022 19:48:22 +0000 (21:48 +0200)]
airoha: disable swconfig
Swconfig isn't used by this target and can be disabled for
this reason. Airoha doesn't even have an Ethernet driver.
In the future, this target should get a DSA driver.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Aleksander Jan Bajkowski [Sat, 15 Oct 2022 19:48:00 +0000 (21:48 +0200)]
airoha: refresh config
This was done by executing these command:
$ time make kernel_oldconfig CONFIG_TARGET=platform
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Pawel Dembicki [Sat, 29 Oct 2022 20:59:50 +0000 (22:59 +0200)]
layerscape: kmod-ppfe: Use ppfe driver as module
In
8274451cb86 kmod-ppfe was changed to built-in because CONFIG_FSL_PPFE
was binary. In 5.10 and 5.15 kernel, PPFE driver can be build as module.
This patch switch kmod-ppfe from build-in to loadable module.
Loadable module helps to avoid hazard: driver is looking for firmware
file before mount root.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Wed, 19 Oct 2022 19:59:40 +0000 (21:59 +0200)]
layerscape: switch kernel testing to 5.15
Let's test layerscape with 5.15 kernel.
Run tested: LS1012A-FRDM, LS1046A-RDB (nor and sd-boot images),
LS1021A-IOT (By @ArtelMike with u-boot fix)
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Thu, 20 Oct 2022 07:54:18 +0000 (09:54 +0200)]
layerscape: Switch LS1012A-FRDM initramfs to gzip
At this moment LS1012A-FRDM have uncompressed initramfs image.
Error was caused, because gzip extract area overlap image.
Let's change loadaddr and enable gzip initramfs images again.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Wed, 19 Oct 2022 20:08:48 +0000 (22:08 +0200)]
layerscape: remove kernel 5.4 dependences
5.4 kernel was removed. Let's clean old dependences.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Wed, 19 Oct 2022 19:57:28 +0000 (21:57 +0200)]
layerscape: 5.15: refresh kernel config
Done by 'make kernel_oldconfig'.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Wed, 19 Oct 2022 13:36:26 +0000 (15:36 +0200)]
layerscape: copy patches 5.10 to 5.15
One patch manually rebased:
302-arm64-dts-ls1012a-update-with-ppfe-support.patch
PFE driver patch recreated from NXP 5.15 tree:
701-staging-add-fsl_ppfe-driver.patch
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Wed, 19 Oct 2022 11:51:52 +0000 (13:51 +0200)]
layerscape: copy config 5.10 to 5.15
Configs was just copied.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>