drm/amdgpu: drop drmP.h from amdgpu_amdkfd_gfx_v10.c

Unused.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop drmP.h in amdgpu_amdkfd_arcturus.c

Unused.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: determine the features to enable by pptable only

Per current logics, the features to enable are determined together
by driver and pptable. This is not efficient in co-debug with
firmware team.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct irq type used for sdma ecc

we should pass irq type, instead of irq client id,
to irq_get/put interface

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: make power limit retrieval as asic specific

The power limit retrieval should be done per asic. Since we may
need to lookup in the pptable and that's really asic specific.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct arcturus current clock level calculation

There may be 1Mhz delta between target and actual frequency. That
should be taken into consideration for current level check.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: support UMD PSTATE settings on arcturus

Enable arcturus UMD PSTATE support.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix arcturus real-time clock frequency retrieval

Make sure we can still get the accurate gfxclk/uclk/socclk frequency
even on dpm disabled.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: remove redundancy debug log in smu

remove redundacy debug log in smu.
eg:
[ 6897.969447] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024114] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024152] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078296] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078333] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6901.133230] amdgpu: [powerplay] Unsupported SMU message: 38

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct the bitmask used in arcturus

Those bitmask prefixed by "SMU_" should be used.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add missing arcturus feature maps

Add missing feature maps for arcturus.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: support fan speed retrieval on arcturus

Support arcturus fan speed retrieval.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: support real-time clock retrieval on arcturus

Enable arcturus real-time clock retrieval.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: support sensor reading on arcturus

Support sensor reading for gpu loading, power and
temperatures.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: init arcturus SMU metrics table on bootup

Initialize arcturus SMU metrics table.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct UVD/VCE/VCN power status retrieval

VCN should be used for Vega20 later ASICs while UVD and VCE
are for previous ASICs.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct Navi10 VCN powergate control (v2)

No VCN DPM bit check as that's different from VCN PG. Also
no extra check for possible double enablement/disablement
as that's already done by VCN.

v2: check return value of smu_feature_set_enabled

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: support VCN powergate status retrieval for SW SMU

Commonly used for VCN powergate status retrieval for SW SMU.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: support VCN powergate status retrieval on Raven

Enable VCN powergate status report on Raven.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add new sensor type for VCN powergate status

VCN is widely used in new ASICs and different from tranditional
UVD and VCE.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update more sdma instances irq support

Update for sdma ras ecc_irq and other minors.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include: adjust base offset of SMUIO and THM for Arcturus

Arcturus has different _BASE_IDX value in some HWIP_offset.h. To make source
files like smu_v11_0.c and soc15.c that include HWIP_offset.h of Vega20
reusable for Arcturus, align this base offset with Vega20.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: hold on the arcturus gfx dpm support in driver

As for now, only "Prefetcher" is guarded to be working from
SMU firmware.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct VCN powergate routine for acturus

Arcturus VCN should powergate in the way as Navi.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable arcturus powerplay

Arcturus powerplay is ready to use.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: initialize arcturus MP1 and THM base address

Initialize base address for those IPs which are used in powerplay.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable SW SMU routine support for arcturus

Enable arcturus SW SMU routines.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update arcturus_ppt.c/h V3

Arcturus ASIC specific powerplay interfaces.

V2: correct SMU msg naming
    drop unnecessary debugs

V3: rebase (Alex)

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update arcturus_ppsmc.h

Correct header and fix typo.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update smu11_driver_if_arcturus.h

It guides how driver should interface with SMU in arcturus.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add SW SMU interface for dumping pptable out (v2)

This is especially useful in early bring up phase.

v2: disabled by default (Alex)

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add smcdpminfo table v4_6 support

New smcdpminfo table used in arcturus.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Save/restore vcc on gfx10

VCC moved out of user SGPR allocation in gfx10. It's now stored
in SGPRs 106-107.

Also fixes incorrect SGPR read offsets.

Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Save/restore flat_scratch_lo/hi on gfx10

These moved from SGPRs in gfx9 to HWREG in gfx10.

Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix gfx10 wave64 VGPR context restore

Copy/paste error, first 4 VGPRs are separated by 64 dwords (256 bytes).

Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Support uclk switching for DCN2

[Why]
We were previously forcing the uclk for every state to max and reducing
the switch time to prevent uclk switching from occuring. This workaround
was previously needed in order to avoid hangs + underflow under certain
display configurations.

Now that DC has the proper fix complete we can drop the hacks and
improve power for most display configurations.

[How]
We still need the function pointers hooked up to grab the real uclk
states from pplib. The rest of the prior hack can be reverted.

The key requirements here are really just DC support, updated firmware,
and support for disabling p-state support when needed in pplib/smu.

When these requirements are met uclk switching works without underflow
or hangs.

Fixes: 02316e963a5a ("drm/amd/display: Force uclk to max for every state")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Embed DCN2 SOC bounding box

[Why]
In order to support uclk switching on NV10 the SOC bounding box
needs to be updated.

[How]
We currently read the constants from the gpu info FW, but supporting
workarounds in DC for different versions of the FW adds additional
complexity to the codebase.

NV10 has been released so it's cleanest to keep the bounding box and
source code in sync by embedding the bounding box like we do for
other ASICs.

Fixes: 02316e963a5a ("drm/amd/display: Force uclk to max for every state")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a potential information leaking bug

Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().

Fix the path by allocating the array with kcalloc().

The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.

Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix error handling in amdgpu_cs_process_fence_dep

We always need to drop the ctx reference and should check
for errors first and then dereference the fence pointer.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: provide the interface to disable uclk switch for DAL

provide the interface for DAL to disable uclk switch on navi10.
in this case, the uclk will be fixed to maximum.
this is a workaround when display configuration causes underflow issue.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0

VCN 2.0 firmware now requires a packet start command to be sent before
any other decode ring buffer command.

Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: update golden settings for navi14

Updated settings for hw team.

Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: implment sysfs feature status function in smu

1. Unified feature enable status format in sysfs
2. Rename ppfeature to pp_features to adapt other pp sysfs node name
3. this function support all asic, not asic related function.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Rui Huang <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move smu_feature_update_enable_state to up level

this function is not ip or asic related function,
so move it to top level as public api in smu.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add smu feature name support

add smu_get_feature_name support in smu.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add smu message name support

add smu_get_message_name support in smu.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move smu types to smu_types.h

move some enum type (message, feature, clock) to smu_types.h.
these types is too long in amdgpu_smu.h, and not clearly.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Default disable GDS for compute+gfx

Units in the GDS block default to allowing all VMIDs access to all
entries. Disable shader access to the GDS, GWS, and OA blocks from all
compute and gfx VMIDs by default. For compute, HWS firmware will set
up the access bits for the appropriate VMID when a compute queue
requires access to these blocks.
The driver will handle enabling access on-demand for graphics VMIDs.

Leaving VMID0 with full access because otherwise HWS cannot save or
restore values during task switch.

v2: Fixed code and comment styling.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commands

Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This
bit was previously set by the RBC HW on older firmware. Newer firmware
uses a SW RBC and this bit has to be set by the driver.

Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: fix the build without CONFIG_DRM_AMD_DC_DSC_SUPPORT

Some code was missing the CONFIG_DRM_AMD_DC_DSC_SUPPORT guard.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix amdgpu_display_supported_domains logic.

Add restriction to dissallow GTT domain if the relevant BO
doesn't have USWC flag set to avoid the APU hang scenario.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: use proper revision id for navi

The PCI revision id determines the sku.

Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: put the SMC into the proper state on reset/unload

When doing a GPU reset or unloading the driver, we need to
put the SMU into the apprpriate state for the re-init after
the reset or unload to reliably work.

I don't think this is necessary for BACO because the SMU actually
controls the BACO state to it needs to be active.

For suspend (S3), the asic is put into D3 so the SMU would be
powered down so I don't think we need to put the SMU into
any special state.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add set_mp1_state for vega12

This sets the SMU into the proper state for various
operations (shutdown, unload, GPU reset, etc.).

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add set_mp1_state for vega10

This sets the SMU into the proper state for various
operations (shutdown, unload, GPU reset, etc.).

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add set_mp1_state for vega20

This sets the SMU into the proper state for various
operations (shutdown, unload, GPU reset, etc.).

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: return success if set_mp1_state is not set

Some asics (APUs) don't have this callback so we want to return
success.  Avoids spurious error messages on APUs.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add a new interface to set the mp1 state

This is required for certain cases such as various GPU resets
(mode1, mode2), BACO, shutdown, unload, etc. to put the SMU into
the appropriate state for when the hw is re-initialized.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add reset_method asic callback for navi

Navi uses either mode1 or baco depending on various
conditions.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add reset_method asic callback for soc15

APUs only support mode2 reset.  dGPUs use either mode1 or
baco depending on various conditions.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add reset_method asic callback for vi

VI always uses the legacy pci based reset.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add reset_method asic callback for cik

CIK always uses the legacy pci based reset.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add reset_method asic callback for si

SI always uses the legacy pci based reset.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an asic callback to determine the reset method

Sometimes the driver may have to behave differently depending
on the method we are using to reset the GPU.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable SW SMU reset functionality

Move SMU irq handler register to sw_init as that's totally
software related. Otherwise, it will prevent SMU reset working.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix null pointer dereference around dpm state relates

DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: minor fixes around SW SMU power and fan setting

Add checking for possible invalid input and null pointer. And
drop redundant code.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable S/G for RAVEN chip

enables gpu_vm_support in dm and adds
AMDGPU_GEM_DOMAIN_GTT as supported domain

v2:
Move BO placement logic into amdgpu_display_supported_domains

v3:
Use amdgpu_bo_validate_uswc in amdgpu_display_supported_domains.

v4:
amdgpu_bo_validate_uswc moved to sepperate patch.

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add check for USWC support for amdgpu_display_supported_domains

This verifies we don't add GTT as allowed domain for APUs when USWC
is disabled.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Create helper to clear AMDGPU_GEM_CREATE_CPU_GTT_USWC

Move the logic to clear AMDGPU_GEM_CREATE_CPU_GTT_USWC in
amdgpu_bo_do_create into standalone helper so it can be reused
in other functions.

v4:
Switch to return bool.

v5: Fix typos.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix hard hang for S/G display BOs.

HW requires for caching to be unset for scanout BO
mappings when the BO placement is in GTT memory.
Usually the flag to unset is passed from user mode
but for FB mode this was missing.

v2:
Keep all BO placement logic in amdgpu_display_supported_domains

Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: adding xgmi error monitoring

monitor xgmi errors via mc pie status through fica registers.

Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Kent Russell <Kent.Russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add perfmon and fica atomics for df

adding perfmon and fica atomic operations to adhere to data fabrics finite
state machine requirements for indirect register access.

Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Kent Russell <Kent.Russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove dead code from gfx8/gfx9 trap handlers

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Replace gfx10 trap handler with correct branch

Previously submitted code was taken from an incorrect branch and
was non-functional.

Cc: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-By: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix lost single step exceptions in gfx9 trap handler

If the trap is entered due to MODE.DEBUG_EN=1 and SAVECTX is raised
concurrently the handler cannot identify the source of the exception.
This causes the debugger to lose single step exception notification
when a context save request arrives at the same time.

When MODE.DEBUG_EN=1 and STATUS.HALT=0 (exception not already handled)
jump to the second-level trap handler upon entering the trap. The
second-level trap will set STATUS.HALT=1 and return to the shader.
If SAVECTX was raised then control flow will return to the trap, which
will then handle the context save request.

Cc: Tony Tye <tony.tye@amd.com>
Cc: Laurent Morichetti <laurent.morichetti@amd.com>
Cc: Qingchuan Shi <qingchuan.shi@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use SQC when TCP would fail in gfx9 context save.

When a wavefront raises TRAPSTS.XNACK_ERROR with STATUS.ALLOW_REPLAY=0
subsequent memory instructions have undefined behavior. In practice
SQC stores continue to work but TCP stores do not.

Context save is permitted to fail after XNACK error because the
wavefront will be halted and subsequently terminated. However the
debugger has an interest in retrieving the wavefront VGPR/LDS state.

Detect the out-of-spec case and use SQC stores during context save
in place of TCP stores.

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc10: fix pte mytpe field error for navi14

navi14 share same PTE format with navi10.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use VCN firmware offset for cache window

Since we are using the signed FW now, and also using PSP firmware loading,
but it's still potential to break driver when loading FW directly
instead of PSP, so we should add offset.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix temperature granularity error in smu11

in this patch,
drm/amd/powerplay: add callback function of get_thermal_temperature_range
the driver missed temperature granularity change on other temperature.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: some cosmetic fixes

Drop redundant check, duplicate check, duplicate setting
and fix the return value.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: no pptable transfer and dpms enabled with "dpm=0"

Honor the 'dpm' module parameter setting on SW SMU routine as what
we did on previous ASICs. SMU FW loading is still proceeded even
with "dpm=0".

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a missing null check on a failed kzalloc

Currently the allocation of config may fail and a null pointer
dereference on config can occur.  Fix this by added a null
check on a failed allocation of config.

Addresses-Coverity: ("Dereference null return")
Fixes: c2cd9d04ecf0 ("drm/amd/display: Hook up calls to do stereo mux and dig programming to stereo control interface")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Use dev_get_drvdata where possible

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use dev_get_drvdata

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use dev_get_drvdata where possible

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines

arch/x86/Makefile disables SSE and SSE2 for the whole kernel.  The
AMDGPU drivers modified in this patch re-enable SSE but not SSE2.  Turn
on SSE2 to support emitting double precision floating point instructions
rather than calls to non-existent (usually available from gcc_s or
compiler_rt) floating point helper routines for Clang.

This was originally landed in:
commit 10117450735c ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")
but reverted in:
commit 193392ed9f69 ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"")
due to bugreports from GCC builds. Add guards to only do so for Clang.

Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487
Link: https://github.com/ClangBuiltLinux/linux/issues/327
Suggested-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix byte align on VegaM

This was missed during the addition of VegaM support

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add callback function of get_thermal_temperature_range

1. the thermal temperature is asic related data, move the code logic to
xxx_ppt.c.
2. replace data structure PP_TemperatureRange with
smu_temperature_range.
3. change temperature uint from temp*1000 to temp (temperature uint).

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/smu: move fan rpm query into the asic specific code

On vega20, there is an SMU message to query it.  On navi, it's fetched
from the metrics table.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set sdma irq src num according to sdma instances

Otherwise, it will cause driver access non-existing sdma registers
in gpu reset code path

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: remove redundancy debug log in smu

remove redundacy debug log in smu.
eg:
[ 6897.969447] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024114] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024152] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078296] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078333] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6901.133230] amdgpu: [powerplay] Unsupported SMU message: 38

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: custom peak clock freq for navi10

v2:
add function smu_default_set_performance_level as default dpm level handler.
change function name smu_set_performance_level to smu_asic_set_performance_level

v1:
1.NAVI10_PEAK_SCLK_XTX    1830 Mhz
2.NAVI10_PEAK_SCLK_XT     1755 Mhz
3.NAVI10_PEAK_SCLK_XL     1625 Mhz

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: handle active dongle port type is DP++ or DP case

[Why]:
Some active dongles have DP++ port and DP port at the same time. Current
code doesn't cover DP++ case and processes as default DVI case, in which
audio is disabled. Because of dual mode, DP case is also treat as DVI case
for the other port.

[How]:
According DP 1.4 spec, add DP++ procedure similar with HDMI case. Also
add None dongle type for DP case.

Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Copy GSL groups when committing a new context

[Why]
DC configures the GSL group for the pipe when pipe_split is enabled
and we're switching flip types (buffered <-> immediate flip) on DCN2.

In order to record what GSL group the pipe is using DC stores it in
the pipe's stream_res. DM is not aware of this internal grouping, nor
is DC resource.

So when DM creates a dc_state context and passes it to DC the current
GSL group is lost - DM never knew about it in the first place.

After 3 immediate flips we run out of GSL groups and we're no longer
able to correctly perform *any* flip for multi-pipe scenarios.

[How]
The gsl_group needs to be copied to the new context.

DM has no insight into GSL grouping and could even potentially create
a brand new context without referencing current hardware state. So this
makes the most sense to have happen in DC.

There are two places where DC can apply a new context:
- dc_commit_state
- dc_commit_updates_for_stream

But what's shared between both of these is apply_ctx_for_surface.

This logic only matters for DCN2, so it can be placed in
dcn20_apply_ctx_for_surface. Before doing any locking (where the GSL
group is setup) we can copy over the GSL groups before committing the
new context.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersen.wu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug entry to destroy disconnected edp link

Add a flag to dc_debug_options to determine if a disconnected edp link
should be destroyed.

Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: avoid power gate domains that doesn't exist

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add SMU version field to clk_mgr_internal

For some platforms, we need to know SMU version for driver/SMU
compatibility. This change adds that field.

Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: support "dummy pstate"

[why]
Existing support in DC for pstate only accounts for a single latency.  This is sufficient when the
variance of latency is small, or that pstate support isn't necessary for correct ASIC functionality.

Newer ASICs violate both existing assumptions.  PState support is mandatory of correct ASIC
functionality, but not all latencies have to be supported.  Existing code supports a "full p state" which
allows memory clock to change, but is hard for DCN to support (as it requires very large buffers).
New code will now fall back to a "dummy p state" support when "full p state" cannot be support.
This easy p state support should always be allowed.

[how]
Define a new latency in socBB.  Add fallback logic to support it.  Note DML is also updated to ensure
that fallback will always work.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix mpcc assert condition

[Why]
In DCN2x asic, the MPCC status register definition changed, and
our logic for assert is incorrect. disabled is valid state,
where we should see idle and not busy, where as in not
disabled state, we should see not idle.

[How]
Change assert condition to be more sensible.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>