Philip Prindeville [Wed, 17 May 2023 15:38:48 +0000 (09:38 -0600)]
kernel: disable IGD (video DRM) support
IGD is only useful when accelerating a VM guest that wants to direct
render to memory in the host's framebuffer, but since OpenWrt
typically runs on headless hardware, this serves no purpose.
Also build vfio with VFIO_NOIOMMU undefined (to get all of the code
enabled), but allow it to be enabled via boot-time modparams
settings (or at run-time via sysfs writes to
"/sys/module/vfio/parameters/enable_unsafe_noiommu_mode".
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Felix Baumann [Sat, 20 May 2023 07:07:44 +0000 (09:07 +0200)]
treewide: Disable building 8M RAM devices
Following deprecation notice[1] in 21.02, disable target with 8M of RAM
[1] https://openwrt.org/supported_devices/864_warning
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Felix Baumann [Sat, 20 May 2023 06:37:45 +0000 (08:37 +0200)]
treewide: Disable building 32M RAM devices
Following deprecation notice[1] in 21.02, disable targets with 32M of RAM
[1] https://openwrt.org/supported_devices/864_warning
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Felix Baumann [Fri, 19 May 2023 16:06:15 +0000 (18:06 +0200)]
treewide: Disable building 16M RAM devices
Following deprecation notice[1] in 21.02, disable targets with 16M of RAM
[1] https://openwrt.org/supported_devices/864_warning
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
DENG Qingfang [Thu, 13 Apr 2023 03:21:01 +0000 (11:21 +0800)]
ramips: mt7621: fix Xiaomi Router 3G/Pro LEDs
The PHY name has been changed to "mt7530-0" since IRQ support
was added to MT7530 driver.
Fixes: f9cfe7af1f1f ("kernel: backport MT7530 IRQ support")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
(node names, added color, function+function-enumerator properties)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Nozomi Miyamori [Wed, 29 Mar 2023 12:15:13 +0000 (21:15 +0900)]
dropbear: add ForceCommand uci option
adds ForceCommand option. If the command is specified,
it forces users to execute the command when they log in.
Signed-off-by: Nozomi Miyamori <inspc43313@yahoo.co.jp>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Stan Grishin [Mon, 27 Feb 2023 00:04:33 +0000 (00:04 +0000)]
x86: base-files add support for Sophos 135r3/135r3w
The Sophos SG/XG-135 revision 3 has odd numbering of eth ports
where the WAN port (as marked on the case) is:
`eth6` and `eth0`, `eth1`, `eth2`, `eth3`, `eth5`, `eth7`, `eth8` are LAN ports.
Port `eth4` seems to be the SFP port.
Also add the missing LED definition for supported Sophos devices.
Original discussion at:
https://forum.openwrt.org/t/openwrt-on-revision-3-of-sophos-desktop-appliances/152912
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Christian Lamparter [Sat, 20 May 2023 19:43:39 +0000 (21:43 +0200)]
tfa-layerscape: fix fiptool's build
A missing '\' caused the remaining parameters not to be passed to make.
This fixes the following error:
| gcc -c [...] fiptool.c -o fiptool.o
| In file included from fiptool.h:16,
| from fiptool.c:19:
|fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory
| 19 | # include <openssl/sha.h>
| | ^~~~~~~~~~~~~~~
|compilation terminated.
|make[3]: *** [Makefile:58: fiptool.o] Error 1
as the HOST_CFLAGS are no longer passed.
then, HOST_CFLAGS is specified as a command argument, this
is a specific problem of our built since appending these
needs the override directive.
Fixes: df28bfe03247 ("tfa-layerscape: Change to github and use the latest tag")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Linhui Liu [Sat, 20 May 2023 05:45:19 +0000 (13:45 +0800)]
tools/ccache: update to 4.8.1
Release Notes:
https://ccache.dev/releasenotes.html#_ccache_4_8_1
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
David Yang [Wed, 8 Feb 2023 01:59:27 +0000 (09:59 +0800)]
build: Allow specifying uImage time
Some U-Boot checks for a specified uImage time and refuses to boot if
mismatched. This patch fixes it by recognizing UIMAGE_TIME parameter.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Nick Hainke [Thu, 18 May 2023 12:49:51 +0000 (14:49 +0200)]
nettle: update to 3.9
Changelog:
https://git.lysator.liu.se/nettle/nettle/-/blob/
26cd0222fd09b8f5dc0edba30d6908722c7e9b09/NEWS
Refresh patch:
- 100-portability.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Sander van Deijck [Thu, 18 May 2023 22:59:25 +0000 (00:59 +0200)]
kirkwood: add support for Iomega Storcenter ix4-200d
Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell
Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of
flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC
Specification:
- SoC: Marvell Kirkwood
88F6281
- CPU/Speed: 1200Mhz
- Flash size: 32 MiB
- RAM: 512MB
- LAN: 2x 1Gbit/s
- 3x USB 2.0
Notes:
- The blue drive LED is triggered by HDD activity, it can not be controlled
via GPIO.
- The LCD screen requires proprietary code and does not function at this time.
- Due to a kernel-related issue with the Marvell 88SE6121 SATA controller,
currently only trays numbered #3 and #4 work, #1 and #2 do not. [1]
Serial pinout:
CN4
--------------
| 10 8 6 4 2 |
| 9 7 5 3 1 |
-------------- PIN 1 Mark (fat line)
1 = RXD
4 = TXD
6 = GND
9 = 3.3V (not necessary to connect)
Installation instructions:
1. download initramfs-uImage and copy into tftp server
2. connect the tftp server to network port #1
3. access uboot environment with serial cable and run
setenv mainlineLinux yes
setenv arcNumber 1682
setenv console 'console=ttyS0,115200n8'
setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
setenv bootargs_root 'root='
setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
saveenv
setenv serverip 192.168.1.1
setenv ipaddr 192.168.1.2
tftpboot 0x00800000 [initramfs-uImage filename]
bootm 0x00800000
4. connect to LAN on network port #2, log into openwrt and sysupgrade to install into flash
[1] https://bugzilla.kernel.org/show_bug.cgi?id=216094
Signed-off-by: Sander van Deijck <sander@vandeijck.com>
(aligned FROM from signed-off. LED+key rename, whitespace removal)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Aleksander Jan Bajkowski [Sun, 14 May 2023 09:43:57 +0000 (11:43 +0200)]
kernel: remove obsolete kernel version switches
This removes unneeded kernel version switches from the targets after
kernel 5.10 has been dropped.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Wojciech Dubowik [Wed, 19 Apr 2023 06:41:18 +0000 (08:41 +0200)]
tfa-layerscape: Change to github and use the latest tag
The default location of tfa-layerscape has been changed from
codeuaurora to github. Also use the latest tag for Layerscape
Linux Development POC from NXP.
v2:
* restored ls1021a-afrdm board
* added platform defines to fiptool so ls-ddr-phy can be built
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:33:37 +0000 (11:33 +0200)]
ppfe-firmware: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of ppfe-firmware has been changed
from codeuaurora to github. Also use the latest tag for
Layerscape Linux Development POC from NXP.
Tested on:
* NXP FRWY-LS1012A
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:22:05 +0000 (11:22 +0200)]
fman-ucode: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of fman-ucode has been changed from
codeuaurora to github. Also use the latest tag for Layerscape
Linux Development POC from NXP.
Tested on:
* NXP LS1046A-RDB
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:20:37 +0000 (11:20 +0200)]
uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of uboot-layerscape has been changed
from codeuaurora to github. Also use the latest tag for
Layerscape Linux Development POC from NXP.
Tested on:
* NXP FRWY-LS1012A
* NXP LS1028A-RDB
* NXP LS1046A-RDB
V2: Remove ls1028ardb specifix fixups not needed with new uboot
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:17:01 +0000 (11:17 +0200)]
ls-rcw: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of ls-rcw has been changed from codeuaurora
to github. The reason is that the old codeaurora source no longer
resolves. Also use the latest tag for Layerscape Linux Development
POC from NXP.
Tested on:
* NXP FRWY-LS1012A
* NXP LS1046A-RDB
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE, Mention that previous codeaurora source is
no longer available)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tiago Gaspar [Wed, 12 Apr 2023 12:53:33 +0000 (13:53 +0100)]
kernel: net: add support for kernel tls
Add ktls (Kernel TLS) kmods to enable TLS support
in kernel (allowing TLS offload when the network
card supports it)
Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
(added disabled symbols)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Sven Roederer [Thu, 11 May 2023 10:42:12 +0000 (12:42 +0200)]
build: escape whitespaces in VERSION_DIST for Netgear images
Prevents subshell commands from failing to parse options
when having defined a whitespace in the VERSION_DIST.
As the called resulting images unlikely will handle
whitespace correctly, we replace them by "-".
Signed-off-by: Sven Roederer <S.Roederer@colvistec.de>
Christian Lamparter [Thu, 18 May 2023 20:51:08 +0000 (22:51 +0200)]
ipq40xx: convert EZVIZ CS-W3-WD1200G-EUP to DSA
Convert the repeater to DSA.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Lech Perczak [Tue, 13 Sep 2022 21:40:06 +0000 (23:40 +0200)]
ath79: fix 5GHz on QCA9886 variant of ZTE MF286
Recently, a strange variant of ZTE MF286 was discovered, having QCA9886
radio instead of QCA9882 - like MF286A, but having MF286 flash layout
and rest of hardware.
To support both variants in one image, bind calibration data at offset
0x5000 both as "calibration" and "pre-calibration" nvmem-cells, so
ath10k can load caldata for both at runtime.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Jan Forman [Fri, 28 May 2021 07:45:52 +0000 (09:45 +0200)]
ath79: Add support for D-Link DIR-869-A1
Specifications
The D-Link EXO AC1750 (DIR-869) router released in 2016.
It is powered by Qualcomm Atheros QCA9563 @ 750 MHz chipset, 64 MB RAM and 16 MB flash.
10/100/1000 Gigabit Ethernet WAN port
Four 10/100/1000 Gigabit Ethernet LAN ports
Power Button, Reset Button, WPS Button, Mode Switch
Flashing
1. Upload factory.bin via D-link web interface (Management/Upgrade).
Revert to stock
Upload original firmware via OpenWrt sysupgrade interface.
Debricking
D-Link Recovery GUI (192.168.0.1)
Signed-off-by: Jan Forman <forman.jan96@gmail.com>
Jan Forman [Mon, 31 Oct 2022 21:15:56 +0000 (22:15 +0100)]
ath79: Convert calibration data to nvmem
For D-link DIR-859 and DIR-869
Replace the mtd-cal-data by an nvmem-cell.
Add the PCIe node for the ath10k radio to the devicetree.
Thanks to DragonBlue for this patch
Signed-off-by: Jan Forman <jforman@tuta.io>
Jan Forman [Sat, 15 May 2021 18:51:14 +0000 (20:51 +0200)]
ath79: Create shared dtsi for DIR-859
Create a shared dtsi for the dir-859 and similarly device, it similarly as it done for the dir-842.
Signed-off-by: Jan Forman <jforman@tuta.io>
Jan Forman [Sat, 15 May 2021 18:48:12 +0000 (20:48 +0200)]
ath79: Replace reset-button for DIR-859
gpio-export for the switch reset pin replaced with a reset pin definition for the driver, within the phy node.
Signed-off-by: Jan Forman <forman.jan96@gmail.com>
Tested-By: Sebastian Schaper <openwrt@sebastianschaper.net>
Linhui Liu [Fri, 19 May 2023 15:06:08 +0000 (23:06 +0800)]
pcre2: switch to Github Releases and bump to 10.42
The mirror at SourceForge is an unofficial mirror and no longer maintained.
ChangeLogs:
https://github.com/PCRE2Project/pcre2/blob/pcre2-10.42/ChangeLog
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Shiji Yang [Fri, 19 May 2023 06:05:01 +0000 (14:05 +0800)]
ramips: fix build error on Airlink AR670W
The 'KERNEL' is not referenced by other objects, so double '$$' will
cause shell unable to parse the variable 'BLOCKSIZE':
dd ... bs=$(BLOCKSIZE) conv=sync
bash: line 1: BLOCKSIZE: command not found
Fixes: 09a0efbe83(ramips: set default BLOCKSIZE to 64k for nor flash devices)
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Hauke Mehrtens [Thu, 18 May 2023 15:12:36 +0000 (17:12 +0200)]
util-linux: Use SYS_getrandom in randutils.c
The getrandom syscall is not hanging at bootup any more if there is
not enough entropy. This was fixed upstream in 2018 in commit:
https://github.com/util-linux/util-linux/commit/
a9cf659e0508c1f56813a7d74c64f67bbc962538
This OpenWrt patch is not needed any more.
This reverts commit
e64463ebde55 ("util-linux: avoid using the getrandom syscall")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 18 May 2023 18:07:24 +0000 (20:07 +0200)]
util-linux: Fix taskset conflict with busybox
This fixes the following error:
* check_data_file_clashes: Package taskset wants to install file build_dir/target-powerpc_8548_musl/root-mpc85xx/usr/bin/taskset
But that file is already provided by package * busybox
* opkg_install_cmd: Cannot install package taskset.
Fixes: 3c3d797c4dad ("busybox: enable taskset by default")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Nick Hainke [Fri, 19 May 2023 09:01:05 +0000 (11:01 +0200)]
tools/cmake: update to 3.26.4
Changelog:
https://www.kitware.com/cmake-3-26-4-available-for-download/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Thu, 18 May 2023 11:07:23 +0000 (13:07 +0200)]
libjson-c: import patch to fix compilation on macos
Fixes errors in the form of:
/Users/user/src/openwrt/openwrt/build_dir/hostpkg/json-c-0.16/json_util.c:63:35: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
const char *json_util_get_last_err()
^
void
1 error generated.
ninja: build stopped: subcommand failed.
Reported-by: Paul Spooren <mail@aparcar.org>
Suggested-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 7 May 2023 15:58:26 +0000 (17:58 +0200)]
f2fs-tools: update to 1.16.0
Remove upstramed patches:
- 100-configure.ac-fix-AC_ARG_WITH.patch
- 101-configure.ac-fix-cross-compilation.patch
Remove deprecated f2fstat tool:
https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=
77bf7ed29f1dd1341079913f3b36fc62f812c4f5
Changelog:
06c027a f2fs-tools: upgrade version 1.16.0
542cc57 fsck.f2fs: fix sanity check logic for cp_payload
a7df89e mkfs.f2fs: remove indentation
c82985a fsck.f2fs: don't call report_zone on normal partition
0ac168e f2fs-tools: relax zone size of power of 2
641be32 mkfs.f2fs: trim all the devices except the first one
3835fef f2fs-tools: fix # of total segments
5b08ca9 f2fs_io: support AES_256_HCTR2
ae3301c f2fs_io: Fix out of tree builds
ddbde27 fsck.f2fs: relocate chksum verification step during f2fs_do_mount()
77bf7ed f2fs-tools: Remove deprecated f2fstat
fb6575e Remove sg_write_buffer
1bb669e fsck.f2fs: avoid uncessary recalculation
ccd2361 fsck.f2fs: fix potential overflow of copying i_name
cd6b133 fsck.f2fs: add parentheses for SB_MASK
399600a dump.f2fs: remove unavailable option -g
3e6e178 f2fs-tools: define HAVE_CLOCK_GETTIME properly
907b972 f2fs-tools: support F2FS_IOC_START_ATOMIC_REPLACE
9ff70fb f2fs-tools: give less overprovisioning space
844f821 f2fs-tools: set host-aware zoned device similar to host-managed one
88ac76d fsck.f2fs: fix missing to assign c.zoned_model
8cbe34e fsck.f2fs: trigger repairing if filesystem has inconsistent errors
2f1dde2 fsck.f2fs: trigger repairing if filesystem was forced to stop
465159f fsck.f2fs: export valid image size
3486b62 mkfs.f2fs: update allocation policy for ro feature
bdd51e5 fsck.f2fs: fix __end_block_addr()
5a5e419 Always use sparse/sparse.h when building for Android
19f77c6 f2fs-tools: fix build error on lz4-1.9.4
986c1f1 Fix format strings in log messages
0d6acbe fsck.f2fs: use elapsed_time in checkpoint for period check
9b7a4c5 mkfs.f2fs: catch total_zones=0 instead of crashing
6148db3 f2fs-tools: use F2FS_BLKSIZE instead of PAGE_*_SIZE
f09c2b7 f2fs_io: support triggering filesystem GC via ioctl
32e7d27 configure.ac: fix cross compilation
65fe94e configure.ac: fix AC_ARG_WITH
6325cf7 Use F2FS_BLKSIZE as the size of struct f2fs_summary_block
c89be7a Use F2FS_BLKSIZE for dev_read_block() buffers
5317d18 Improve compile-time type checking for f2fs_report_zone()
92e2e52 Fix f2fs_report_zone()
648a491 Fix the struct f2fs_dentry_block definition
c964547 resize.f2fs: add option to manually specify new overprovision
a741438 fsck.f2fs: drop compression bit if inline_data is set
406b1c9 f2fs-tools: fix cannot get bdev information
9d0cb9e f2fs_io: add dsync option for write
a7b8b46 tools: fix file too large causing overflow
bddca6f dump.f2fs: add -I nid to dump inode by scan full disk
ebc3879 android_config: add time headers
c1144bf Check fallthrough in mount.h for Mac
bcb9929 avoid unnecessary function
7d902f4 Fix dependencies on linux/blkzoned.h when using Bionic.
274abbb Remove unnecessary config.h
8c97ab3 libzone: remove duplicate header
adcec10 Support zoned device if libc exists
efc2bc7 mkfs.f2fs: fix typo
3034a41 mkfs.f2fs: split unused parameter
dd8d8e5 f2fs-tools: do not use SG_IO in Android
4f216e6 f2fs-tools: move android_config before defining them
48c5dbb f2fscrypt: adjust config file first
4b55459 android_config: add missing uuid library
Signed-off-by: Nick Hainke <vincent@systemli.org>
Hauke Mehrtens [Thu, 18 May 2023 14:19:47 +0000 (16:19 +0200)]
ath25: Replace fall through comment with fallthrough;
Replace the fall through comment with fallthrough; in the ar2315 flash
driver.
This fixes a compile warning.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 18 May 2023 14:17:58 +0000 (16:17 +0200)]
ath25: Remove virt_to_phys() from Ethernet driver
Instead of defining an own virt_to_phys() use the version from the
generic MIPS arch code which does the same.
This fixes a compile warning.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 18 May 2023 17:29:18 +0000 (19:29 +0200)]
util-linux: Fix build on powerpc and arc
This fixes the build of util-linux on powerpc and arc. Both CPU
architectures were not supported here in addition to the missing MIPS
support.
Fixes: 628a410ed149 ("util-linux: update to 2.39")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Fri, 19 May 2023 08:31:36 +0000 (09:31 +0100)]
mediatek: fix append-gl-metadata when running in buildbot
Use same logic as in append-metadata so build doesn't fail in case of
missing build-key (it was previously failing on the buildbot runners).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Robert Marko [Thu, 18 May 2023 10:20:15 +0000 (12:20 +0200)]
ipq40xx: fix rebooting after 5.15.111
Kernel 5.15.111 includes backport of commit
("firmware: qcom_scm: Clear download bit during reboot") which is causing
reboot on ipq40xx to stop working, more precisely the board will hang after
reboot is called with:
root@OpenWrt:/# reboot
root@OpenWrt:/# [ 76.473541] device lan1 left promiscuous mode
[ 76.474204] br-lan: port 1(lan1) entered disabled state
[ 76.527975] device lan2 left promiscuous mode
[ 76.530301] br-lan: port 2(lan2) entered disabled state
[ 76.579376] device lan3 left promiscuous mode
[ 76.581698] br-lan: port 3(lan3) entered disabled state
[ 76.638434] device lan4 left promiscuous mode
[ 76.638777] br-lan: port 4(lan4) entered disabled state
[ 76.978489] qca8k-ipq4019
c000000.switch wan: Link is Down
[ 76.978883] device eth0 left promiscuous mode
[ 76.987077] ipqess-edma
c080000.ethernet eth0: Link is Down
[
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1339 - bootable_media_detect_entry, Start
B - 1679 - bootable_media_detect_success, Start
B - 1693 - elf_loader_entry, Start
B - 5076 - auth_hash_seg_entry, Start
B - 7223 - auth_hash_seg_exit, Start
B - 578349 - elf_segs_hash_verify_entry, Start
B - 696356 - PBL, End
B - 696380 - SBL1, Start
B - 787236 - pm_device_init, Start
D - 7 - pm_device_init, Delta
B - 788701 - boot_flash_init, Start
D - 52782 - boot_flash_init, Delta
B - 845625 - boot_config_data_table_init, Start
D - 3836 - boot_config_data_table_init, Delta - (419 Bytes)
B - 852841 - clock_init, Start
D - 7566 - clock_init, Delta
B - 864883 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:64
B - 868413 - sbl1_ddr_set_params, Start
B - 873402 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 877842 - Pre_DDR_clock_init, Start
D - 4 - Pre_DDR_clock_init, Delta
D - 13234 - sbl1_ddr_set_params, Delta
B - 891155 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 909105 - Image Load, Start
B -
1030210 - Boot error ocuured!. Error code: 303d
So, until a proper fix is found, lets revert the culprit patch to have
reboot working again.
Fixes: 228e0e10398b ("kernel: bump 5.15 to 5.15.111")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Hauke Mehrtens [Wed, 17 May 2023 22:31:21 +0000 (00:31 +0200)]
toolchain: glibc: Fix build with autoconf 2.71
The glibc build was failing with this error message:
aclocal.m4:6: error: Exactly version 2.69 of Autoconf is required but you have 2.71
aclocal.m4:6: the top level
The autoconf run on glibc is not needed, just remove it.
Fixes: #12631
Fixes: 030447b8f4c7 ("tools/autoconf: bump to 2.71")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 17 May 2023 22:27:22 +0000 (00:27 +0200)]
toolchain: glibc: Update glibc 2.37 to recent HEAD
This adds the following changes:
790e504a17 stdlib: Undo post review change to
16adc58e73f3 [BZ #27749]
590d0e089b elf: Restore ldconfig libc6 implicit soname logic [BZ #30125]
1d63573f81 stdio-common: tests: don't double-define _FORTIFY_SOURCE
97ad4c64b9 gshadow: Matching sgetsgent, sgetsgent_r ERANGE handling (bug 30151)
9cc2f41e52 x86_64: Fix asm constraints in feraiseexcept (bug 30305)
78ab913eab posix: Fix system blocks SIGCHLD erroneously [BZ #30163]
5d750495db gmon: Fix allocated buffer overflow (bug 29444)
d230623264 gmon: improve mcount overflow handling [BZ# 27576]
ff3a71ec1f gmon: fix memory corruption issues [BZ# 30101]
a908c18d47 gmon: Revert addition of tunables to preserve GLIBC_PRIVATE ABI
7c32cb7dd8 gmon: Revert addition of tunables to the manual
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
John Audia [Thu, 18 May 2023 10:18:23 +0000 (06:18 -0400)]
kernel: bump 5.15 to 5.15.112
Manually adjusted before running quilt due to new location in tree:
backport-5.15/780-v5.16-bus-mhi-pci_generic-Introduce-Sierra-EM919X-support.patch
backport-5.15/781-v6.1-bus-mhi-host-always-print-detected-modem-name.patch
pending-5.15/790-bus-mhi-core-add-SBL-state-callback.patch
All other patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Thu, 18 May 2023 10:16:11 +0000 (06:16 -0400)]
kernel: other: adjust paths for new location
This upstream commit[1] moves drivers/bus/mhi/core/ to
drivers/bus/mhi/host/ so we need to correct for that here.
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.112&id=
9fbf10148f31a63b6d8c2b0e56cb97eb173d600b
Signed-off-by: John Audia <therealgraysky@proton.me>
Mark Baker [Thu, 11 May 2023 19:15:57 +0000 (15:15 -0400)]
umdns: Update to umdns HEAD
Update to umdns HEAD to include latest enhancements for browse method
filtering, return of TXT records as an array, dumping IPv4/6 as an
array, and including the interface name in a browse reply.
Signed-off-by: Mark Baker <mark@vpost.net>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x, mt7621, x86_64
Tianling Shen [Sat, 13 May 2023 05:54:38 +0000 (13:54 +0800)]
rockchip: add NanoPi R2C support
The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 05:54:38 +0000 (13:54 +0800)]
uboot-rockchip: add NanoPi R2C support
Add support for the FriendlyARM NanoPi R2C.
Manually generated of-platdata files to avoid swig dependency.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 05:54:38 +0000 (13:54 +0800)]
kernel: backport Motorcomm YT8521/YT8531 support
It will be used on NanoPi R2C and OrangePi R1 Plus LTS board.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 04:34:45 +0000 (12:34 +0800)]
rockchip: move UBOOT_DEVICE_NAME to default
Simplify variable usage.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 04:19:52 +0000 (12:19 +0800)]
rockchip: merge bootscript
The bootscript for nanopi r2s/r4s only changes the serial address, so
make it auto detected in mmc bootscript rather than creating more
(redudant) files.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 04:16:21 +0000 (12:16 +0800)]
uboot-rockchip: cleanup redudant variables
Instead of adding these common variables again and again simply create a
shared set for each SoC.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tim Harvey [Tue, 28 Feb 2023 00:56:25 +0000 (16:56 -0800)]
gpio-button-hotplug: do not error on interrupt attached keys
The Linux gpio-keys driver bindings allow for GPIO attached or interrupt
attached keys. Currently if an interrupt attached key is encountered
gpio_keys_button_probe() will fail due to not being able to get a gpio
descriptor:
gpio-keys: probe of gpio-keys failed with error -2
Skip the failure in the case of interrupt attached keys to resolve this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Christian Lamparter [Thu, 18 May 2023 15:08:54 +0000 (17:08 +0200)]
ipq806x: remove dangling ipq-wifi-edgecore_ecw5410
should have been part of the ipq-wifi update.
Fixes: 8217f02a1c5e ("ipq-wifi: drop upstreamed board-2.bin")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tim Harvey [Fri, 17 Feb 2023 22:03:46 +0000 (14:03 -0800)]
imx: image: ventana: add blkdev compressed disk image
Add a ventana-img.gz compressed disk image to support
squashfs+ext4 on a block storage device such as USB/MMC/SATA.
The Ventana bootloader expects the bootscript to be
boot/6x_bootscript-ventana therefore we must create a bootfs
that matches this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Fri, 17 Feb 2023 22:03:45 +0000 (14:03 -0800)]
imx: image: ventana: use squashfs rootfs for non NAND devices
In order to support squashfs+ext4 define rootfstype=squashfs and use P2
as P1 is boot filesystem.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Thomas Weißschuh [Wed, 17 May 2023 14:58:19 +0000 (16:58 +0200)]
util-linux: update to 2.39
Release Notes:
https://cdn.kernel.org/pub/linux/utils/util-linux/v2.39/v2.39-ReleaseNotes
Remove upstreamed:
030-meson-don-t-use-run.patch
040-meson-fix-cpu_set_t-test.patch
050-meson-fix-environ-search.patch
060-meson-add-_GNU_SOURCE-for-sighandler_t.patch
070-meson-fix-isnan-check.patch
080-meson-fix-tzname-check.patch
090-meson-libpam.patch
100-meson-make-libcap-ng-dependent-on-setpriv.patch
120-meson-get-the-project-version-from-the-version-gen-s.patch
130-meson-fix-error-in-processing-version-for-pc-files.patch
New:
0001-test_enosys-add-support-for-mips.patch
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
[Refresh patches]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rosen Penev [Fri, 12 May 2023 15:43:31 +0000 (08:43 -0700)]
ksmbd: remove
In tree ksmbd is available with 5.15 and is better updated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Thu, 19 May 2022 03:11:38 +0000 (20:11 -0700)]
linux/modules: add ksmbd support for 5.15
5.15 is the first version to come with ksmbd. Use it instead of the
module as the linux one is better maintained.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
John Thomson [Sat, 24 Dec 2022 12:57:34 +0000 (22:57 +1000)]
kernel: modules: split smbfs-common from cifs
This kernel config symbol is a shared library used for both CIFS and the
in-tree SMB_SERVER.
Split it out into kmod-fs-smbfs-common from kmod-fs-cifs, and depend on
it, so that later in-tree ksmbd may also depend on it.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Shiji Yang [Sat, 13 May 2023 13:01:00 +0000 (21:01 +0800)]
ramips: add basic common recipe for nand flash devices
These same codes are repeated for many devices now, it's better to
move them to shared definition. This commit also add the missing
KERNEL_SIZE of the ZyXEL NR7101 and ZyXEL LTE3301-PLUS.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Sat, 13 May 2023 13:01:00 +0000 (21:01 +0800)]
ramips: set default BLOCKSIZE to 64k for nor flash devices
In kernel 5.15, the default erase sector size of the nor flash has
been switched from 4k to 64k. This may cause the configuration not
be preserved across upgrades. To avoid this issue, change the default
BLOCKSIZE to 64k.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Sat, 13 May 2023 13:00:59 +0000 (21:00 +0800)]
ramips: enable variable sector size erasure for all subtarget
Make use of minor sector size (4k) on supported flash chips to improve
spi read/write performance.
Tested on ramips/mt7628: Motorola MWR03
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Tianling Shen [Tue, 16 May 2023 04:38:53 +0000 (12:38 +0800)]
kernel: add MODULE_ALLOW_BTF_MISMATCH option
BTF mismatch can occur for a separately-built module even when the ABI
is otherwise compatible and nothing else would prevent successfully
loading. Add a new config to control how mismatches are handled. By
default, preserve the current behavior of refusing to load the
module. If MODULE_ALLOW_BTF_MISMATCH is enabled, load the module but
ignore its BTF information.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Christian Lamparter [Wed, 17 May 2023 20:02:40 +0000 (22:02 +0200)]
ipq-wifi: drop upstreamed board-2.bin
The BDFs for the:
Aruba AP-365
Devolo Magic 2 WiFi next
Edgecore ECW5410
Edgecore OAP100
Extreme Networks WS-AP3915i
GL.iNet GL-A1300
GL.iNet GL-AP1300
GL.iNet GL-S1300
Linksys EA8300
Linksys WHW03v2
Nokia Wi4A AC400i
P&W R619AC
Pakedge WR-1
Qxwlan
E2600AC C1
Sony NCP-HG100/Cellular
Teltonika RUTX10
ZTE MF18A
were upstreamed to the ath10k-firmware repository
and landed in linux-firmware.git.
Furthermore the BDFs for the:
8devices Habanero
8devices Jalapeno
Qxwlan
E2600AC C2
have been updated.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
INAGAKI Hiroshi [Thu, 23 Mar 2023 14:06:14 +0000 (23:06 +0900)]
mvebu: use PHY LED trigger for speed LEDs on FortiGate 50E
Use <mdio>:<addr>:<speed> trigger instead of netdev(link) trigger for
Fortinet FortiGate 50E, to indicate link speed on the each phys.
1000 Mbps: Green
100 Mbps : Amber
10 Mbps : (turn off)
Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
INAGAKI Hiroshi [Thu, 23 Mar 2023 14:06:13 +0000 (23:06 +0900)]
mvebu: cortexa9: enable Ethernet PHY LED trigger
To use <mdio>:<addr>:<speed> trigger for LEDs, enable PHY LED trigger
(CONFIG_LED_TRIGGER_PHY).
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Tomasz Maciej Nowak [Wed, 10 May 2023 17:07:07 +0000 (19:07 +0200)]
download: create immutable subversion checkout archive
On each generation of the archive check sum will differ, because when
checking out subversion repository, current date is used for directories
creation. Force tar to assign creation date of the last revision for all
items inside archive.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tim Harvey [Wed, 22 Mar 2023 16:02:52 +0000 (09:02 -0700)]
scripts/gen_image_generic.sh: allow passing in partition offset
Allow passing in an optional offset (PARTOFFSET) for the first partition.
If not specified this will default to 256K (512 blocks) as it has before.
For example if you want to start partition data at a 16M offset instead
of 256K, specify 'PARTOFFSET=16M'.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Thu, 23 Feb 2023 23:23:42 +0000 (15:23 -0800)]
octeontx: kernel: add USB storage boot support
Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass
Storage device.
This increases the kernel Image by 66KiB
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Thu, 23 Feb 2023 23:24:18 +0000 (15:24 -0800)]
imx: kernel: add USB storage boot support
Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass
Storage device.
This adds 23KiB to the compressed kernel size
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Christian Lamparter [Wed, 17 May 2023 20:33:36 +0000 (22:33 +0200)]
nu801: add kmod-leds-uleds to MR26 + MR18
support for MR18 and MR26 was developped before
the userspace nu801 was integrated with x86's
MX100 into OpenWrt. The initial nu801 + kmod-leds-uleds
caused build-bot errors.
The solution that worked for the MX100 was to include
the kmod-leds-uleds to the device platform module.
Thankfully, the MR26 and MR18 can just add the uleds
package to the DEVICE_PACKAGES variable.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Nick Hainke [Thu, 18 May 2023 10:06:00 +0000 (12:06 +0200)]
libxml2: update to 2.11.3
Changelog:
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.10.4
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.0
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.1
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.2
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.3
Fixes: CVE-2023-28484 CVE-2023-29469
Signed-off-by: Nick Hainke <vincent@systemli.org>
Arınç ÜNAL [Tue, 18 Apr 2023 13:42:41 +0000 (16:42 +0300)]
ramips: rename to D-Team Newifi D2 and Lenovo Newifi D1
Rename Newifi D2 to D-Team Newifi D2, and Newifi D1 to Lenovo Newifi D1.
Let's not make naming exceptions because of marketing whims.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Arınç ÜNAL [Wed, 29 Mar 2023 10:11:30 +0000 (13:11 +0300)]
ramips: add support for TOZED ZLT S12 PRO
The TOZED ZLT S12 PRO is an AC1200 router featuring 4 Ethernet ports with a
TOZED TL70-C cellular modem which supports the NCM mode.
The stock firmware does SIM locking on the modem by stopping dialing when a
different PLMN is detected. This is not the case on OpenWrt.
Specifications:
- CPU: MediaTek MT7621AT
- RAM: 256MB DDR3
- NOR Flash: MX25L12833FM2I 16MB SPI Flash
- Wi-Fi 2.4Ghz: MT7603E
- Wi-Fi 5Ghz: MT7612E
- Switch: MT7530 4x 1Gbit Ports
- WWAN: Unisoc SL8563 based TOZED TL70-C LTE CAT6 cellular modem
- USB: 1x optional USB2.0 external port
- Switches/Buttons: WPS, Reset, Power Switch
- LEDs: Power, Wi-Fi, Data, Signal 1-5, Phone
Installation and TFTP Recovery:
- Connect to serial console.
- Boot initramfs image by choosing option 1 when U-Boot prompts.
- Install sysupgrade image via OpenWrt.
Serial Pins:
Located at the bottom right when looking from the front, right under the
Reset/WPS buttons. The pinout from the left is:
- RX
- GND
- TX
Baudrate is 115200.
When connecting from a powered off state, disconnect RX as it blocks the
boot process.
Link: http://www.sztozed.com/en/contents/58/84.html
Co-developed-by: Andre Cruz <me@1conan.com>
Signed-off-by: Andre Cruz <me@1conan.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Arınç ÜNAL [Mon, 17 Apr 2023 20:11:29 +0000 (23:11 +0300)]
comgt-ncm: add support for UNISOC SL8563 based TOZED TL70-C
TOZED TL70-C is an LTE CAT6 cellular modem based on UNISOC SL8563. UNISOC
was formerly called Spreadtrum hence the manufacturer name detected on the
modem is spreadtrum.
The connect and disconnect commands bring up and down the usb0 interface.
They are Base64 encoded as that's what the AT command accepts. The modem
can do up to 4 APNs by bringing the USB interfaces, usb0 to usb3, up.
Setting the USB interfaces up:
connmanctl ndisdial AT^NDISDUN="usb0",1,1
connmanctl ndisdial AT^NDISDUN="usb1",1,2
connmanctl ndisdial AT^NDISDUN="usb2",1,3
connmanctl ndisdial AT^NDISDUN="usb3",1,4
Setting the USB interfaces down:
connmanctl ndisdial AT^NDISDUN="usb0",0,1
connmanctl ndisdial AT^NDISDUN="usb1",0,2
connmanctl ndisdial AT^NDISDUN="usb2",0,3
connmanctl ndisdial AT^NDISDUN="usb3",0,4
Co-developed-by: Andre Cruz <me@1conan.com>
Signed-off-by: Andre Cruz <me@1conan.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Arınç ÜNAL [Thu, 11 May 2023 23:50:43 +0000 (01:50 +0200)]
base-files: add protocol ncm support for ucidef_set_interface()
Make it possible to set up a default network (interface) for devices with
cellular modems using NCM.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Joe Cooper [Mon, 15 May 2023 21:49:59 +0000 (23:49 +0200)]
wwan: add Medion S4222 usb lte stick
add description for medion usb lte webstick
Signed-off-by: Joe Cooper <highjagger+github@gmail.com>
[bump PKG_RELEASE]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tianling Shen [Sat, 13 May 2023 13:57:00 +0000 (21:57 +0800)]
ucode: update to the latest version
8f78aff2cb68 ubus: support multiple call return values
51f4dba67313 ucode: also link libresolv if ns_initparse() is not found
5c7d07773a59 uci: fix ctx.commit() without arguments
5163867269fc Merge pull request #148 from jow-/uci-fix-commit
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Daniel Golle [Thu, 18 May 2023 10:21:48 +0000 (11:21 +0100)]
mediatek: remove left-over reference to make_gl_metadata.py
When adding support for the GL.iNet GL-MT3000 a reference to the
non-existent make_gl_metadata.py script was accidentally added.
Remove it, flashing from vendor firmware also works fine without that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Muhammad AL-Qadhy [Sun, 7 May 2023 13:37:51 +0000 (16:37 +0300)]
ramips: Fix Wireless Frequencies for HYC-G920
Fix wireless frequencies to show correct wireless interfaces.
Signed-off-by: Muhammad AL-Qadhy <m.ismael@gmail.com>
Tianling Shen [Wed, 17 May 2023 13:14:25 +0000 (21:14 +0800)]
px5g-wolfssl: replace COMMITCOUNT with real PKG_RELEASE
Similar to the AUTORELEASE conversion process.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Wed, 17 May 2023 13:08:40 +0000 (21:08 +0800)]
treewide: replace AUTORELEASE with real PKG_RELEASE
Based on Paul Fertser <fercerpav@gmail.com>'s guidance:
Change AUTORELEASE in rules.mk to:
```
AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile))
```
then update all affected packages by:
```
for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';);
do
make package/$i/clean
done
```
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
David Bauer [Thu, 18 May 2023 08:43:52 +0000 (10:43 +0200)]
firmware-utils: update to latest HEAD
02cdbc6 tplink-safeloader: add Archer AX23 v1.2 (RU)
de36fa6 tplink-safeloader: add AX23 support-list entry
5f6fefd tplink-safeloader: order AX23 support-list
25131d6 tplink-safeloader: add Archer C59 / C60 CA ragion code
Signed-off-by: David Bauer <mail@david-bauer.net>
Linhui Liu [Sat, 13 May 2023 09:40:32 +0000 (17:40 +0800)]
libselinux: update to 3.5
Switch from libpcre to libpcre2. While working on it remove the double
defined HOST_BUILD_DEPENDS section.
Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
[depend on libpcre2]
Signed-off-by: Nick Hainke <vincent@systemli.org>
Linhui Liu [Sat, 13 May 2023 09:57:00 +0000 (17:57 +0800)]
secilc: update to 3.5
Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Linhui Liu [Sat, 13 May 2023 09:54:56 +0000 (17:54 +0800)]
policycoreutils: update to 3.5
Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Linhui Liu [Sat, 13 May 2023 09:43:31 +0000 (17:43 +0800)]
libsemanage: update to 3.5
Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Linhui Liu [Sat, 13 May 2023 09:47:04 +0000 (17:47 +0800)]
libsepol: update to 3.5
Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Linhui Liu [Sat, 13 May 2023 09:52:17 +0000 (17:52 +0800)]
checkpolicy: update to 3.5
Release Notes:
https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt
https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Nick Hainke [Wed, 17 May 2023 20:39:20 +0000 (22:39 +0200)]
pcre: move package to packages feed
With the update of selinux no package depends anymore on pcre in the
base repository. Move it to packages feed.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Wed, 17 May 2023 09:09:21 +0000 (11:09 +0200)]
pcre2: import pcre2 from packages feed
pcre2 is needed by newer selinux versions, so it needs to be in the base
repository.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Petr Štetiar [Wed, 17 May 2023 20:08:12 +0000 (22:08 +0200)]
ci: fix check kernel patches job
Currently the check fails due to the following error:
warning: Not a git repository. Use --no-index to compare two paths outside a working tree
usage: git diff --no-index [<options>] <path> <path>
Thats likely caused by commit
1cb8cdbf0723 ("ci: use new buildbot worker
images with Debian 11") which contains a patched Git version with CVE
security fixes introduced in DLA-3239-2:
Multiple issues were found in Git, a distributed revision control
system. An attacker may cause other local users into executing arbitrary
commands, leak information from the local filesystem, and bypass
restricted shell.
Note: Due to new security checks, access to repositories owned and
accessed by different local users may now be rejected by Git; in case
changing ownership is not practical, git displays a way to bypass these
checks using the new "safe.directory" configuration entry.
So lets opt-out of this new behavior by setting `safe.directory=*` and
thus force Git to consider all Git repositories as safe regardless of
their owner, since we need to trust those sources anyway and it should
be likely more robust solution, then fiddling with filesystem
permissions.
Fixes: 1cb8cdbf0723 ("ci: use new buildbot worker images with Debian 11")
References: https://www.debian.org/lts/security/2022/dla-3239-2
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Daniel Golle [Thu, 20 Apr 2023 17:34:47 +0000 (18:34 +0100)]
mediatek: update patch add PWM support for MT7981
Update patch with version submitted upstream.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 11 Mar 2023 03:56:35 +0000 (03:56 +0000)]
mediatek: add support for the GL.iNet GL-MT3000
The MT-3000 is a pocket-sized Wi-Fi 6 router based on MediaTek MT7981.
Specification:
- SoC: MediaTek MT7981B
- CPU: 2x 1.3 GHz Cortex-A53
- Flash: 256 MiB Macronix SPI NAND
- RAM: 512 MiB Nanya DDR4
- WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN)
- Ethernet:
- 1x 10/100/1000 Mbps built-in PHY (LAN)
- 1x 10/100/1000/2500 Mbps MaxLinear GPY211 PHY (WAN)
- USB 3.0 port
- Buttons: 1 button, 1 switch
- LEDs: 1x light-blue, 1x warm-white
- Serial console: internal 4-pin header, 115200 8n1
- PWM controlled fan with tacho
- Power: 5 VDC, 3 A (USB Type-C)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 15 May 2023 23:03:56 +0000 (01:03 +0200)]
mac80211: fix mt7601u firmware path and refresh patches
Import patch fixing the updated firmware path of mt7601u.bin.
Refresh patches while at it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Wed, 17 May 2023 13:55:42 +0000 (15:55 +0200)]
mediatek: add support for Cudy WR3000 v1
Hardware
--------
MediaTek MT7981 WiSoC
256MB DDR3 RAM
16MB SPI-NOR (XMC XM25QH128C)
MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
UART: 115200 8N1 3.3V
[LEDS] VCC-GND-RX-TX [ETH]
Header is located below the heatsink
Case
----
Unscrew the 4 bottom screws. Remove the top of the case by inserting a
small screwdriver into the ventilation holes and lift the top cover.
This works best by beginning near the ETH-ports. The top is clipped on
the front near the LEDs with two plastic clips. The back has a single
clip in the middle. Start at one of the back edges.
MAC-Addresses
-------------
80:AF:CA:00:F9:C6 LAN
80:AF:CA:00:F9:C7 WAN
80:AF:CA:00:F9:C6 W2
82:AF:CA:30:F9:C6 W5
Installation
------------
1. Connect to the serial port as described in the "Hardware" section.
2. Power on the device. Keep pressing the "0" key to enter the U-Boot
shell.
3. Download the OpenWrt initramfs image. Place it on an TFTP server
connected to the Cudy LAN ports. Make sure the server is reachable at
192.168.1.2. Rename the image to "cudy3000.bin"
4. Download and boot the OpenWrt initramfs image.
$ tftpboot 0x46000000 cudy3000.bin; bootm 0x46000000
5. Transfer the OpenWrt sysupgrade image to the device using scp.
Install with sysupgrade.
Note: Cudy does not yet provide a image for disabling their
signature-protection. This has happened in the past. Make sure to check
the wiki for a possible easier installation method.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 17 May 2023 20:47:38 +0000 (22:47 +0200)]
iwinfo: update to latest HEAD
c9f5c3f devices: add MediaTek MT7981 WMAC compatible
b3888b2 devices: add compatible strings for Ralink WiSoCs
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 17 May 2023 18:42:56 +0000 (20:42 +0200)]
mt76: add MT7981 firmware packages
Package the firmware required for MT7981 to bring up the radio.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 17 May 2023 18:37:21 +0000 (20:37 +0200)]
mt76: update to latest HEAD
969b7b5e wifi: mt76: mt7915: add support for MT7981
cddbd796 linux-firmware: add firmware for MT7981
c69b0239 linux-firmware: update firmware for MT7921 WiFi device
c85a0f2f mt7921: remove duplicated line
0cbe1376 wifi: mt76: mt7915: drop redundant prefix of mt7915_txpower_puts()
b490c6c7 wifi: mt76: fix 6GHz high channel not be scanned
db5a8f70 wifi: mt76: move shared mac definitions in mt76_connac2_mac.h
3963ab2f wifi: mt76: mt7921: get rid of eeprom.h
c09f943d wifi: mt76: add mt76_connac_gen_ppe_thresh utility routine
28ea992c wifi: mt76: get rid of unused sta_ps callbacks
2936b036 wifi: mt76: add mt76_connac_irq_enable utility routine
482d2a76 wifi: mt76: move irq_tasklet in mt76_dev struct
88d1b002 wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu support
577fbd47 linux-firmware: update firmware for MT7916
32be54b5 linux-firmware: update firmware for MT7921 WiFi device
4e2fad04 linux-firmware: update firmware for MT7922 WiFi device
f8793b1a linux-firmware: update firmware for MT7921 WiFi device
91e6ad2a linux-firmware: update firmware for MT7921 WiFi device
b7a538a3 linux-firmware: update firmware for MT7922 WiFi device
e3b5a8cc wifi: mt76: mt7996: enable configured beacon tx rate
a18bf481 wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE support
f863beed wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support
aedc10d5 wifi: mt76: connac: add nss calculation into mt76_connac2_mac_tx_rate_val()
84a227e5 wifi: mt76: connac: fix txd multicast rate setting
a0657180 wifi: mt76: mt7921e: stop chip reset worker in unregister hook
fd895347 wifi: mt76: mt7921e: improve reliability of dma reset
c9fa8d64 wifi: mt76: mt7921: fix missing unwind goto in `mt7921u_probe`
c1baa812 mt76: mt7921: fix kernel panic by accessing unallocated eeprom.data
ca180889 wifi: mt76: move mcu_uni_event and mcu_reg_event in common code
98fbca7a wifi: mt76: mt7996: enable coredump support
be1ff24e wifi: mt76: mt7996: add full system reset knobs into debugfs
b7a6c0ef wifi: mt76: mt7996: enable full system reset support
46f28e75 wifi: mt76: mt7921: enable p2p support
6a7e41c3 wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unset
084e6de7 wifi: mt76: mt7921: use driver flags rather than mac80211 flags to mcu
c66e7a1a wifi: mt76: mt7921: introduce mt7921_get_mac80211_ops utility routine
821caac5 wifi: mt76: mt7996: fix eeprom tx path bitfields
9ae2569b wifi: mt76: mt7996: remove mt7996_mcu_set_pm()
3244d176 wifi: mt76: mt7996: init mpdu density cap
210a558a wifi: mt76: mt7996: fix pointer calculation in ie countdown event
207c92bb wifi: mt76: mt7996: remove unused eeprom band selection
16a24667 wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queue
d39bb7c8 wifi: mt76: mt7996: remove mt7996_mcu_beacon_check_caps()
4046b591 wifi: mt76: mt7915: remove mt7915_mcu_beacon_check_caps()
d63cb85c wifi: mt76: add missing locking to protect against concurrent rx/status calls
22f1b777 mt76: adjust for ieee80211_is_bufferable_mmpdu API change
8ecf551c wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported drivers
efa44cb5 wifi: mt76: ignore key disable commands
56f0cd4d wifi: mt76: mt7915 add tc offloading support
021ded36 tools: Fix compile error with glibc
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 17 May 2023 20:51:58 +0000 (22:51 +0200)]
mediatek: fix typo
Signed-off-by: David Bauer <mail@david-bauer.net>
Álvaro Fernández Rojas [Wed, 17 May 2023 16:03:33 +0000 (18:03 +0200)]
bmips: improve kernel patches
Add missing patch headers and regenerate the ones that contain an obsolete
patch header.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Nick Hainke [Tue, 16 May 2023 18:07:38 +0000 (20:07 +0200)]
mdadm: fix compilation with musl 1.2.4
_LARGEFILE64_SOURCE has to be defined in the source, or CFLAGS can be used
to pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.
Fixes error in the form of:
restripe.c: In function 'restore_stripes':
restripe.c:758:43: error: 'off64_t' undeclared (first use in this function); did you mean 'off_t'?
758 | (off64_t)read_offset) {
| ^~~~~~~
| off_t
restripe.c:758:43: note: each undeclared identifier is reported only once for each function it appears in
restripe.c:758:51: error: expected ')' before 'read_offset'
758 | (off64_t)read_offset) {
| ^~~~~~~~~~~
| )
restripe.c:757:36: note: to match this '('
757 | if (lseek64(source, read_offset, 0) !=
| ^
make[3]: *** [Makefile:193: restripe.o] Error 1
Fixes: fff878c5bcda ("toolchain/musl: update to 1.2.4")
Signed-off-by: Nick Hainke <vincent@systemli.org>
projects / openwrt / staging / hauke.git / log