git.openwrt.org Git - openwrt/staging/blogic.git/log

Merge tag 'modules-for-v4.16-rc7' of git://git./linux/kernel/git/jeyu/linux

Pull modules fix from Jessica Yu:
"Propagate error in modules_open() to avoid possible later NULL
dereference if seq_open() had failed"

* tag 'modules-for-v4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: propagate error in modules_open()

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Always validate XFRM esn replay attribute, from Florian Westphal.

2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.

3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
    Triebitz.

4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
    Axtens.

5) Fix some interrupt handling issues in e1000e driver, from Benjamin
    Poitier.

6) Use strlcpy() in several ethtool get_strings methods, from Florian
    Fainelli.

7) Fix rhlist dup insertion, from Paul Blakey.

8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.

9) Fix driver unload crash when link is up in smsc911x, from Jeremy
    Linton.

10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
    Dumazet.

11) Need to purge the write queue when TCP connections are aborted,
    otherwise userspace using MSG_ZEROCOPY can't close the fd. From
    Soheil Hassas Yeganeh.

12) Fix double free in error path of team driver, from Arkadi
    Sharshevsky.

13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.

14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
    Bianconi.

15) Properly filter out unsupported feature flags in macvlan driver,
    from Shannon Nelson.

16) Don't request loading the diag module for a protocol if the protocol
    itself is not even registered. From Xin Long.

17) If datagram connect fails in ipv6, make sure the socket state is
    consistent afterwards. From Paolo Abeni.

18) Use after free in qed driver, from Dan Carpenter.

19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
    entry. From Sabrina Dubroca.

20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.

21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.

22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.

23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.

24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.

25) Memory leak in gemini driver, from Igor Pylypiv.

26) IDR leaks in error paths of tcf_*_init() functions, from Davide
    Caratti.

27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.

28) Missing dev_put() in error path of macsec_newlink(), from Dan
    Carpenter.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
  macsec: missing dev_put() on error in macsec_newlink()
  net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
  hv_netvsc: common detach logic
  hv_netvsc: change GPAD teardown order on older versions
  hv_netvsc: use RCU to fix concurrent rx and queue changes
  hv_netvsc: disable NAPI before channel close
  net/ipv6: Handle onlink flag with multipath routes
  ppp: avoid loop in xmit recursion detection code
  ipv6: sr: fix NULL pointer dereference when setting encap source address
  ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
  net: aquantia: driver version bump
  net: aquantia: Implement pci shutdown callback
  net: aquantia: Allow live mac address changes
  net: aquantia: Add tx clean budget and valid budget handling logic
  net: aquantia: Change inefficient wait loop on fw data reads
  net: aquantia: Fix a regression with reset on old firmware
  net: aquantia: Fix hardware reset when SPI may rarely hangup
  s390/qeth: on channel error, reject further cmd requests
  s390/qeth: lock read device while queueing next buffer
  s390/qeth: when thread completes, wake up all waiters
  ...

Merge tag 'mmc-v4.16-rc4' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes intended for v4.16-rc7:

  MMC host:

   - dw_mmc: Fix the suspend/resume issue for Exynos5433

   - dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit
     systems

   - dw_mmc: Make PIO mode work when failing with idmac when
     dw_mci_reset occurs

   - sdhci-acpi: Re-allow IRQ 0 to fix broken probe

  MMC core:

   - Update EXT_CSD caches to correctly switch partition for ioctl calls

   - Fix tracepoint print of blk_addr and blksz

   - Disable HPI on broken Micron (Numonyx) eMMC cards"

* tag 'mmc-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-acpi: Fix IRQ 0
  mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
  mmc: core: Fix tracepoint print of blk_addr and blksz
  mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
  mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433
  mmc: block: fix updating ext_csd caches on ioctl call
  mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems

macsec: missing dev_put() on error in macsec_newlink()

We moved the dev_hold(real_dev); call earlier in the function but forgot
to update the error paths.

Fixes: 0759e552bce7 ("macsec: fix negative refcnt on parent link")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2018-03-21' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Two more fixes (in three patches):
* ath9k_htc doesn't like QoS NDP frames, use regular ones
* hwsim: set up wmediumd for radios created later
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: Fix functional dsa-loop dependency on FIXED_PHY

We have a functional dependency on the FIXED_PHY MDIO bus because we register
fixed PHY devices "the old way" which only works if the code that does this has
had a chance to run before the fixed MDIO bus is probed. Make sure we account
for that and have dsa_loop_bdinfo.o be either built-in or modular depending on
whether CONFIG_FIXED_PHY reflects that too.

Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hv_netvsc-fix-races-during-shutdown-and-changes'

Stephen Hemminger says:

====================
hv_netvsc: fix races during shutdown and changes

This set of patches fixes issues identified by Vitaly Kuznetsov and
Mohammed Gamal related to state changes in Hyper-v network driver.

A lot of the issues are because setting up the netvsc device requires
a second step (in work queue) to get all the sub-channels running.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: common detach logic

Make common function for detaching internals of device
during changes to MTU and RSS. Make sure no more packets
are transmitted and all packets have been received before
doing device teardown.

Change the wait logic to be common and use usleep_range().

Changes transmit enabling logic so that transmit queues are disabled
during the period when lower device is being changed. And enabled
only after sub channels are setup. This avoids issue where it could
be that a packet was being sent while subchannel was not initialized.

Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: change GPAD teardown order on older versions

On older versions of Windows, the host ignores messages after
vmbus channel is closed.

Workaround this by doing what Windows does and send the teardown
before close on older versions of NVSP protocol.

Reported-by: Mohammed Gamal <mgamal@redhat.com>
Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: use RCU to fix concurrent rx and queue changes

The receive processing may continue to happen while the
internal network device state is in RCU grace period.
The internal RNDIS structure is associated with the
internal netvsc_device structure; both have the same
RCU lifetime.

Defer freeing all associated parts until after grace
period.

Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: disable NAPI before channel close

This makes sure that no CPU is still process packets when
the channel is closed.

Fixes: 76bb5db5c749 ("netvsc: fix use after free on module removal")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6: Handle onlink flag with multipath routes

For multipath routes the ONLINK flag can be specified per nexthop in
rtnh_flags or globally in rtm_flags. Update ip6_route_multipath_add
to consider the ONLINK setting coming from rtnh_flags. Each loop over
nexthops the config for the sibling route is initialized to the global
config and then per nexthop settings overlayed. The flag is 'or'ed into
fib6_config to handle the ONLINK flag coming from either rtm_flags or
rtnh_flags.

Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ppp: avoid loop in xmit recursion detection code

We already detect situations where a PPP channel sends packets back to
its upper PPP device. While this is enough to avoid deadlocking on xmit
locks, this doesn't prevent packets from looping between the channel
and the unit.

The problem is that ppp_start_xmit() enqueues packets in ppp->file.xq
before checking for xmit recursion. Therefore, __ppp_xmit_process()
might dequeue a packet from ppp->file.xq and send it on the channel
which, in turn, loops it back on the unit. Then ppp_start_xmit()
queues the packet back to ppp->file.xq and __ppp_xmit_process() picks
it up and sends it again through the channel. Therefore, the packet
will loop between __ppp_xmit_process() and ppp_start_xmit() until some
other part of the xmit path drops it.

For L2TP, we rapidly fill the skb's headroom and pppol2tp_xmit() drops
the packet after a few iterations. But PPTP reallocates the headroom
if necessary, letting the loop run and exhaust the machine resources
(as reported in https://bugzilla.kernel.org/show_bug.cgi?id=199109).

Fix this by letting __ppp_xmit_process() enqueue the skb to
ppp->file.xq, so that we can check for recursion before adding it to
the queue. Now ppp_xmit_process() can drop the packet when recursion is
detected.

__ppp_channel_push() is a bit special. It calls __ppp_xmit_process()
without having any actual packet to send. This is used by
ppp_output_wakeup() to re-enable transmission on the parent unit (for
implementations like ppp_async.c, where the .start_xmit() function
might not consume the skb, leaving it in ppp->xmit_pending and
disabling transmission).
Therefore, __ppp_xmit_process() needs to handle the case where skb is
NULL, dequeuing as many packets as possible from ppp->file.xq.

Reported-by: xu heng <xuheng333@zoho.com>
Fixes: 55454a565836 ("ppp: avoid dealock on recursive xmit")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: sr: fix NULL pointer dereference when setting encap source address

When using seg6 in encap mode, we call ipv6_dev_get_saddr() to set the
source address of the outer IPv6 header, in case none was specified.
Using skb->dev can lead to BUG() when it is in an inconsistent state.
This patch uses the net_device attached to the skb's dst instead.

[940807.667429] BUG: unable to handle kernel NULL pointer dereference at 000000000000047c
[940807.762427] IP: ipv6_dev_get_saddr+0x8b/0x1d0
[940807.815725] PGD 0 P4D 0
[940807.847173] Oops: 0000 [#1] SMP PTI
[940807.890073] Modules linked in:
[940807.927765] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G        W        4.16.0-rc1-seg6bpf+ #2
[940808.028988] Hardware name: HP ProLiant DL120 G6/ProLiant DL120 G6, BIOS O26    09/06/2010
[940808.128128] RIP: 0010:ipv6_dev_get_saddr+0x8b/0x1d0
[940808.187667] RSP: 0018:ffff88043fd836b0 EFLAGS: 00010206
[940808.251366] RAX: 0000000000000005 RBX: ffff88042cb1c860 RCX: 00000000000000fe
[940808.338025] RDX: 00000000000002c0 RSI: ffff88042cb1c860 RDI: 0000000000004500
[940808.424683] RBP: ffff88043fd83740 R08: 0000000000000000 R09: ffffffffffffffff
[940808.511342] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88042cb1c850
[940808.598012] R13: ffffffff8208e380 R14: ffff88042ac8da00 R15: 0000000000000002
[940808.684675] FS:  0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000
[940808.783036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[940808.852975] CR2: 000000000000047c CR3: 00000004255fe000 CR4: 00000000000006e0
[940808.939634] Call Trace:
[940808.970041]  <IRQ>
[940808.995250]  ? ip6t_do_table+0x265/0x640
[940809.043341]  seg6_do_srh_encap+0x28f/0x300
[940809.093516]  ? seg6_do_srh+0x1a0/0x210
[940809.139528]  seg6_do_srh+0x1a0/0x210
[940809.183462]  seg6_output+0x28/0x1e0
[940809.226358]  lwtunnel_output+0x3f/0x70
[940809.272370]  ip6_xmit+0x2b8/0x530
[940809.313185]  ? ac6_proc_exit+0x20/0x20
[940809.359197]  inet6_csk_xmit+0x7d/0xc0
[940809.404173]  tcp_transmit_skb+0x548/0x9a0
[940809.453304]  __tcp_retransmit_skb+0x1a8/0x7a0
[940809.506603]  ? ip6_default_advmss+0x40/0x40
[940809.557824]  ? tcp_current_mss+0x24/0x90
[940809.605925]  tcp_retransmit_skb+0xd/0x80
[940809.654016]  tcp_xmit_retransmit_queue.part.17+0xf9/0x210
[940809.719797]  tcp_ack+0xa47/0x1110
[940809.760612]  tcp_rcv_established+0x13c/0x570
[940809.812865]  tcp_v6_do_rcv+0x151/0x3d0
[940809.858879]  tcp_v6_rcv+0xa5c/0xb10
[940809.901770]  ? seg6_output+0xdd/0x1e0
[940809.946745]  ip6_input_finish+0xbb/0x460
[940809.994837]  ip6_input+0x74/0x80
[940810.034612]  ? ip6_rcv_finish+0xb0/0xb0
[940810.081663]  ipv6_rcv+0x31c/0x4c0
...

Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Reported-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state

The seg6_build_state() function is called with RCU read lock held,
so we cannot use GFP_KERNEL. This patch uses GFP_ATOMIC instead.

[   92.770271] =============================
[   92.770628] WARNING: suspicious RCU usage
[   92.770921] 4.16.0-rc4+ #12 Not tainted
[   92.771277] -----------------------------
[   92.771585] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section!
[   92.772279]
[   92.772279] other info that might help us debug this:
[   92.772279]
[   92.773067]
[   92.773067] rcu_scheduler_active = 2, debug_locks = 1
[   92.773514] 2 locks held by ip/2413:
[   92.773765]  #0:  (rtnl_mutex){+.+.}, at: [<00000000e5461720>] rtnetlink_rcv_msg+0x441/0x4d0
[   92.774377]  #1:  (rcu_read_lock){....}, at: [<00000000df4f161e>] lwtunnel_build_state+0x59/0x210
[   92.775065]
[   92.775065] stack backtrace:
[   92.775371] CPU: 0 PID: 2413 Comm: ip Not tainted 4.16.0-rc4+ #12
[   92.775791] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014
[   92.776608] Call Trace:
[   92.776852]  dump_stack+0x7d/0xbc
[   92.777130]  __schedule+0x133/0xf00
[   92.777393]  ? unwind_get_return_address_ptr+0x50/0x50
[   92.777783]  ? __sched_text_start+0x8/0x8
[   92.778073]  ? rcu_is_watching+0x19/0x30
[   92.778383]  ? kernel_text_address+0x49/0x60
[   92.778800]  ? __kernel_text_address+0x9/0x30
[   92.779241]  ? unwind_get_return_address+0x29/0x40
[   92.779727]  ? pcpu_alloc+0x102/0x8f0
[   92.780101]  _cond_resched+0x23/0x50
[   92.780459]  __mutex_lock+0xbd/0xad0
[   92.780818]  ? pcpu_alloc+0x102/0x8f0
[   92.781194]  ? seg6_build_state+0x11d/0x240
[   92.781611]  ? save_stack+0x9b/0xb0
[   92.781965]  ? __ww_mutex_wakeup_for_backoff+0xf0/0xf0
[   92.782480]  ? seg6_build_state+0x11d/0x240
[   92.782925]  ? lwtunnel_build_state+0x1bd/0x210
[   92.783393]  ? ip6_route_info_create+0x687/0x1640
[   92.783846]  ? ip6_route_add+0x74/0x110
[   92.784236]  ? inet6_rtm_newroute+0x8a/0xd0

Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'aquantia-fixes'

Igor Russkikh says:

====================
Aquantia atlantic hot fixes 03-2018

This is a set of atlantic driver hot fixes for various areas:

Some issues with hardware reset covered,
Fixed napi_poll flood happening on some traffic conditions,
Allow system to change MAC address on live device,
Add pci shutdown handler.

patch v2:
- reverse christmas tree
- remove driver private parameter, replacing it with define.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: driver version bump

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: Implement pci shutdown callback

We should close link and all NIC operations during shutdown.
On some systems graceful reboot never closes NIC interface on its own,
but only indicates pci device shutdown. Without explicit handler, NIC
rx rings continued to transfer DMA data into prepared buffers while CPU
rebooted already. That caused memory corruptions on soft reboot.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: Allow live mac address changes

There is nothing prevents us from changing MAC on the running interface.
Allow this with ndev priv flag.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: Add tx clean budget and valid budget handling logic

We should report to napi full budget only when we have more job to do.
Before this fix, on any tx queue cleanup we forced napi to do poll again.
Thats a waste of cpu resources and caused storming with napi polls when
there was at least one tx on each interrupt.

With this fix we report full budget only when there is more job on TX
to do. Or, as before, when rx budget was fully consumed.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: Change inefficient wait loop on fw data reads

B1 hardware changes behavior of mailbox interface, it has busy bit
always raised. Data ready condition should be detected by increment
of address register.

Old code has empty `for` loop, and that caused cpu overloads on B1
hardware. aq_nic_service_timer_cb consumed ~100ms because of that.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: Fix a regression with reset on old firmware

FW 1.5.58 and below needs a fixed delay even after 0x18 register
is filled. Otherwise, setting MPI_INIT state too fast causes
traffic hang.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: Fix hardware reset when SPI may rarely hangup

Under some circumstances (notably using thunderbolt interface) SPI
on chip reset may be in active transaction.
Here we forcibly cleanup SPI to prevent possible hangups.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 's390-qeth-fixes'

Julian Wiedmann says:

====================
s390/qeth: fixes 2018-03-20

Please apply one final set of qeth patches for 4.16.
All of these fix long-standing bugs, so please queue them up for -stable
as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: on channel error, reject further cmd requests

When the IRQ handler determines that one of the cmd IO channels has
failed and schedules recovery, block any further cmd requests from
being submitted. The request would inevitably stall, and prevent the
recovery from making progress until the request times out.

This sort of error was observed after Live Guest Relocation, where
the pending IO on the READ channel intentionally gets terminated to
kick-start recovery. Simultaneously the guest executed SIOCETHTOOL,
triggering qeth to issue a QUERY CARD INFO command. The command
then stalled in the inoperabel WRITE channel.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: lock read device while queueing next buffer

For calling ccw_device_start(), issue_next_read() needs to hold the
device's ccwlock.
This is satisfied for the IRQ handler path (where qeth_irq() gets called
under the ccwlock), but we need explicit locking for the initial call by
the MPC initialization.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: when thread completes, wake up all waiters

qeth_wait_for_threads() is potentially called by multiple users, make
sure to notify all of them after qeth_clear_thread_running_bit()
adjusted the thread_running_mask. With no timeout, callers would
otherwise stall.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: free netdevice when removing a card

On removal, a qeth card's netdevice is currently not properly freed
because the call chain looks as follows:

qeth_core_remove_device(card)
lx_remove_device(card)
unregister_netdev(card->dev)
card->dev = NULL !!!
qeth_core_free_card(card)
if (card->dev) !!!
free_netdev(card->dev)

Fix it by free'ing the netdev straight after unregistering. This also
fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()),
where the need to free the current netdevice was not considered at all.

Note that free_netdev() takes care of the netif_napi_del() for us too.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-phy-Add-general-dummy-stubs-for-MMD-register-access'

Kevin Hao says:

====================
net: phy: Add general dummy stubs for MMD register access

v2:
As suggested by Andrew:
- Add general dummy stubs
- Also use that for the micrel phy

This patch series fix the Ethernet broken on the mpc8315erdb board introduced
by commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default").
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: micrel: Use the general dummy stubs for MMD register access

The new general dummy stubs for MMD register access were introduced.
Use that for the codes reuse.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: realtek: Use the dummy stubs for MMD register access for rtl8211b

The Ethernet on mpc8315erdb is broken since commit b6b5e8a69118
("gianfar: Disable EEE autoneg by default"). The reason is that
even though the rtl8211b doesn't support the MMD extended registers
access, it does return some random values if we trying to access
the MMD register via indirect method. This makes it seem that the
EEE is supported by this phy device. And the subsequent writing to
the MMD registers does cause the phy malfunction. So use the dummy
stubs for the MMD register access to fix this issue.

Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: Add general dummy stubs for MMD register access

For some phy devices, even though they don't support the MMD extended
register access, it does have some side effect if we are trying to
read/write the MMD registers via indirect method. So introduce general
dummy stubs for MMD register access which these devices can use to avoid
such side effect.

Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'batadv-net-for-davem-20180319' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

- fix possible IPv6 packet loss when multicast extension is used, by Linus Luessing

- fix SKB handling issues for TTVN and DAT, by Matthias Schiffer (two patches)

- fix include for eventpoll, by Sven Eckelmann

- fix skb checksum for ttvn reroutes, by Sven Eckelmann
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-sched-action-idr-leak'

Davide Caratti says:

====================
fix idr leak in actions

This series fixes situations where a temporary failure to install a TC
action results in the permanent impossibility to reuse the configured
value of 'index'.

Thanks to Cong Wang for the initial review.

v2: fix build error in act_ipt.c, reported by kbuild test robot
====================

Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix idr leak in the error path of tcf_skbmod_init()

tcf_skbmod_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure skbmod rules
using the same idr value will systematically fail with -ENOSPC, unless
the first attempt was done using the 'replace' keyword:

# tc action add action skbmod swap mac index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action skbmod swap mac index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action skbmod swap mac index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...

Fix this in tcf_skbmod_init(), ensuring that tcf_idr_release() is called
on the error path when the idr has been reserved, but not yet inserted.
Also, don't test 'ovr' in the error path, to avoid a 'replace' failure
implicitly become a 'delete' that leaks refcount in act_skbmod module:

# rmmod act_skbmod; modprobe act_skbmod
# tc action add action skbmod swap mac index 100
# tc action add action skbmod swap mac continue index 100
RTNETLINK answers: File exists
We have an error talking to the kernel
# tc action replace action skbmod swap mac continue index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action list action skbmod
#
# rmmod act_skbmod
rmmod: ERROR: Module act_skbmod is in use

Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix idr leak in the error path of tcf_vlan_init()

tcf_vlan_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure vlan rules using
the same idr value will systematically fail with -ENOSPC, unless the first
attempt was done using the 'replace' keyword.

# tc action add action vlan pop index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action vlan pop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action vlan pop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...

Fix this in tcf_vlan_init(), ensuring that tcf_idr_release() is called on
the error path when the idr has been reserved, but not yet inserted. Also,
don't test 'ovr' in the error path, to avoid a 'replace' failure implicitly
become a 'delete' that leaks refcount in act_vlan module:

# rmmod act_vlan; modprobe act_vlan
# tc action add action vlan push id 5 index 100
# tc action replace action vlan push id 7 index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action list action vlan
#
# rmmod act_vlan
rmmod: ERROR: Module act_vlan is in use

Fixes: 4c5b9d9642c8 ("act_vlan: VLAN action rewrite to use RCU lock/unlock and update")
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix idr leak in the error path of __tcf_ipt_init()

__tcf_ipt_init() can fail after the idr has been successfully reserved.
When this happens, subsequent attempts to configure xt/ipt rules using
the same idr value systematically fail with -ENOSPC:

# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
Command "(null)" is unknown, try "tc actions help".
# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
Command "(null)" is unknown, try "tc actions help".
# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
         target:  LOG level warning prefix "test1" index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...

Fix this in the error path of __tcf_ipt_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup(). Since tcf_ipt_release() can now be called
when tcfi_t is NULL, we also need to protect calls to ipt_destroy_target()
to avoid NULL pointer dereference.

Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix idr leak in the error path of tcp_pedit_init()

tcf_pedit_init() can fail to allocate 'keys' after the idr has been
successfully reserved. When this happens, subsequent attempts to configure
a pedit rule using the same idr value systematically fail with -ENOSPC:

# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...

Fix this in the error path of tcf_act_pedit_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().

Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix idr leak in the error path of tcf_act_police_init()

tcf_act_police_init() can fail after the idr has been successfully
reserved (e.g., qdisc_get_rtab() may return NULL). When this happens,
subsequent attempts to configure a police rule using the same idr value
systematiclly fail with -ENOSPC:

# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: No space left on device
...

Fix this in the error path of tcf_act_police_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().

Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix idr leak in the error path of tcf_simp_init()

if the kernel fails to duplicate 'sdata', creation of a new action fails
with -ENOMEM. However, subsequent attempts to install the same action
using the same value of 'index' systematically fail with -ENOSPC, and
that value of 'index' will no more be usable by act_simple, until rmmod /
insmod of act_simple.ko is done:

# tc actions add action simple sdata hello index 100
# tc actions list action simple

action order 0: Simple <hello>
index 100 ref 1 bind 0
# tc actions flush action simple
# tc actions add action simple sdata hello index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc actions flush action simple
# tc actions add action simple sdata hello index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc actions add action simple sdata hello index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...

Fix this in the error path of tcf_simp_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup().

Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix idr leak on the error path of tcf_bpf_init()

when the following command sequence is entered

# tc action add action bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' index 100
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
# tc action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel

act_bpf correctly refuses to install the first TC rule, because 31 is not
a valid instruction. However, it refuses to install the second TC rule,
even if the BPF code is correct. Furthermore, it's no more possible to
install any other rule having the same value of 'index' until act_bpf
module is unloaded/inserted again. After the idr has been reserved, call
tcf_idr_release() instead of tcf_idr_cleanup(), to fix this issue.

Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qede: fix spelling mistake: "registeration" -> "registration"

Trivial fix to spelling mistakes in DP_ERR error message text and
comments

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: fix spelling mistake: "registeration" -> "registration"

Trivial fix to spelling mistake in BNX2X_ERR error message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-03-21

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Follow-up fix to the fault injection framework to prevent jump
   optimization on the kprobe by installing a dummy post-handler,
   from Masami.

2) Drop bpf_perf_prog_read_value helper from tracepoint type programs
   which was mistakenly added there and would otherwise crash due to
   wrong input context, from Yonghong.

3) Fix a crash in BPF fs when compiled with clang. Code appears to
   be fine just that clang tries to overly aggressive optimize in
   non C conform ways, therefore fix the kernel's Makefile to
   generally prevent such issues, from Daniel.

4) Skip unnecessary capability checks in bpf syscall, which is otherwise
   triggering unnecessary security hooks on capability checking and
   causing false alarms on unprivileged processes trying to access
   CAP_SYS_ADMIN restricted infra, from Chenbo.

5) Fix the test_bpf.ko module when CONFIG_BPF_JIT_ALWAYS_ON is set
   with regards to a test case that is really just supposed to fail
   on x8_64 JIT but not others, from Thadeu.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ath9k_htc: use non-QoS NDP for AP probing

When switching mac80211 to use QoS NDP, it turned out that
ath9k_htc is somehow broken by this, e.g. see
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060.

Fix this by using the new mac80211 flag to go back to the
old, incorrect, behaviour for this driver.

Fixes: 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing")
Reported-by: Ben Caradoc-Davies <ben@transient.nz>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211_hwsim: Set wmediumd for new radios

Set the wmediumd to the net's wmediumd when the radio gets created.
Radios created after HWSIM_CMD_REGISTER don't currently get their
data->wmediumd set and the userspace would need to reconnect to
netlink to be able to call HWSIM_CMD_REGISTER again.

Alternatively I think data->netgroup and data->wmedium could be
replaced with a pointer to hwsim_net.

Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mmc: sdhci-acpi: Fix IRQ 0

Zero is a valid IRQ number and is being used on some CHT tablets. Stop
treating it as an error.

Reported-by: Luke Ross <luke@lukeross.name>
Fixes: 1b7ba57ecc86 ("mmc: sdhci-acpi: Handle return value of platform_get_irq")
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mac80211: add ieee80211_hw flag for QoS NDP support

Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") added an
argument qos_ok to ieee80211_nullfunc_get to support QoS NDP. Despite
the claim in the commit log "Change all the drivers to *not* allow
QoS NDP for now, even though it looks like most of them should be OK
with that", this commit enables QoS NDP in response to beacons (see
change to mlme.c:ieee80211_send_nullfunc), causing ath9k_htc to lose
IP connectivity. See:
https://patchwork.kernel.org/patch/10241109/
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060

Introduce a hardware flag to allow such buggy drivers to override the
correct default behaviour of mac80211 of sending QoS NDP packets.

Signed-off-by: Ben Caradoc-Davies <ben@transient.nz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A late collection of fixes for regressions seen this release cycle.
  Normally I send this earlier than now but real life got in the way.
  Things are back to normal now.

  There's the normal set of SoC driver fixes: i.MX boot warning, TI
  display clks, allwinner clk ops being wrong (fun), driver probe
  badness on error paths, correctness fix for the new aspeed driver, and
  even a fix for a race condition in the bcm2835 clk driver.

  At the core framework level we also got some fixes for the clk phase
  API caching at the wrong time, better handling of the enabled state of
  orphan clks, and a fix for a newly introduced bug in how we handle
  rate calculations for pass-through clks"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: bcm2835: Protect sections updating shared registers
  clk: bcm2835: Fix ana->maskX definitions
  clk: aspeed: Prevent reset if clock is enabled
  clk: aspeed: Fix is_enabled for certain clocks
  clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe()
  clk: hisilicon: hi3660：Fix potential NULL dereference in hi3660_stub_clk_probe()
  clk: fix determine rate error with pass-through clock
  clk: migrate the count of orphaned clocks at init
  clk: update cached phase to respect the fact when setting phase
  clk: ti: am43xx: add set-rate-parent support for display clkctrl clock
  clk: ti: am33xx: add set-rate-parent support for display clkctrl clock
  clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
  clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
  clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops

kbuild: disable clang's default use of -fmerge-all-constants

Prasad reported that he has seen crashes in BPF subsystem with netd
on Android with arm64 in the form of (note, the taint is unrelated):

  [ 4134.721483] Unable to handle kernel paging request at virtual address 800000001
  [ 4134.820925] Mem abort info:
  [ 4134.901283]   Exception class = DABT (current EL), IL = 32 bits
  [ 4135.016736]   SET = 0, FnV = 0
  [ 4135.119820]   EA = 0, S1PTW = 0
  [ 4135.201431] Data abort info:
  [ 4135.301388]   ISV = 0, ISS = 0x00000021
  [ 4135.359599]   CM = 0, WnR = 0
  [ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000
  [ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000
  [ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP
  [ 4135.674610] Modules linked in:
  [ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S      W       4.14.19+ #1
  [ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000
  [ 4135.731599] PC is at bpf_prog_add+0x20/0x68
  [ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c
  [ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145
  [ 4135.769062] sp : ffffff801d4e3ce0
  [...]
  [ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000)
  [ 4136.273746] Call trace:
  [...]
  [ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006
  [ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584
  [ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68
  [ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c
  [ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c
  [ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88

Android's netd was basically pinning the uid cookie BPF map in BPF
fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it
again resulting in above panic. Issue is that the map was wrongly
identified as a prog! Above kernel was compiled with clang 4.0,
and it turns out that clang decided to merge the bpf_prog_iops and
bpf_map_iops into a single memory location, such that the two i_ops
could then not be distinguished anymore.

Reason for this miscompilation is that clang has the more aggressive
-fmerge-all-constants enabled by default. In fact, clang source code
has a comment about it in lib/AST/ExprConstant.cpp on why it is okay
to do so:

  Pointers with different bases cannot represent the same object.
  (Note that clang defaults to -fmerge-all-constants, which can
  lead to inconsistent results for comparisons involving the address
  of a constant; this generally doesn't matter in practice.)

The issue never appeared with gcc however, since gcc does not enable
-fmerge-all-constants by default and even *explicitly* states in
it's option description that using this flag results in non-conforming
behavior, quote from man gcc:

  Languages like C or C++ require each variable, including multiple
  instances of the same variable in recursive calls, to have distinct
  locations, so using this option results in non-conforming behavior.

There are also various clang bug reports open on that matter [1],
where clang developers acknowledge the non-conforming behavior,
and refer to disabling it with -fno-merge-all-constants. But even
if this gets fixed in clang today, there are already users out there
that triggered this. Thus, fix this issue by explicitly adding
-fno-merge-all-constants to the kernel's Makefile to generically
disable this optimization, since potentially other places in the
kernel could subtly break as well.

Note, there is also a flag called -fmerge-constants (not supported
by clang), which is more conservative and only applies to strings
and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In
gcc's code, the two flags -fmerge-{all-,}constants share the same
variable internally, so when disabling it via -fno-merge-all-constants,
then we really don't merge any const data (e.g. strings), and text
size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o).

  $ gcc -fverbose-asm -O2 foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S
    -> foo.S doesn't list -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled

Thus, as a workaround we need to set both -fno-merge-all-constants
*and* -fmerge-constants in the Makefile in order for text size to
stay as is.

  [1] https://bugs.llvm.org/show_bug.cgi?id=18538

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Richard Smith <richard-llvm@metafoo.co.uk>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: linux-kernel@vger.kernel.org
Tested-by: Prasad Sodagudi <psodagud@codeaurora.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"Not much exciting here, almost entirely syzkaller fixes.

  This is going to be on ongoing theme for some time, I think. Both
  Google and Mellanox are now running syzkaller on different parts of
  the user API.

  Summary:

   - Many bug fixes related to syzkaller from Leon Romanovsky. These are
     still for the mlx driver and ucma interface.

   - Fix a situation with port reuse for iWarp, discovered during
     scale-up testing

   - Bug fixes for the profile and restrack patches accepted during this
     merge window

   - Compile warning cleanups from Arnd, this is apparently the last
     warning to make 32 bit builds quiet"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/ucma: Ensure that CM_ID exists prior to access it
  RDMA/verbs: Remove restrack entry from XRCD structure
  RDMA/ucma: Fix use-after-free access in ucma_close
  RDMA/ucma: Check AF family prior resolving address
  infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
  infiniband: qplib_fp: fix pointer cast
  IB/mlx5: Fix cleanup order on unload
  RDMA/ucma: Don't allow join attempts for unsupported AF family
  RDMA/ucma: Fix access to non-initialized CM_ID object
  RDMA/core: Do not use invalid destination in determining port reuse
  RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
  IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
  IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:

- one driver patch (qla2xxx) which fixes a problem caused by an
   existing regression fix (FCP discovery is failing)

- one generic fix to a longstanding bug in libsas that causes I/O
   eventually to hang to the device in the face of ATA error recovery.

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
  scsi: libsas: defer ata device eh commands to libata

Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux

Pull nfsd fix from Bruce Fields:
"Just one fix for an occasional panic from Jeff Layton"

* tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux:
nfsd: remove blocked locks on client teardown

bpf: skip unnecessary capability check

The current check statement in BPF syscall will do a capability check
for CAP_SYS_ADMIN before checking sysctl_unprivileged_bpf_disabled. This
code path will trigger unnecessary security hooks on capability checking
and cause false alarms on unprivileged process trying to get CAP_SYS_ADMIN
access. This can be resolved by simply switch the order of the statement
and CAP_SYS_ADMIN is not required anyway if unprivileged bpf syscall is
allowed.

Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

trace/bpf: remove helper bpf_perf_prog_read_value from tracepoint type programs

Commit 4bebdc7a85aa ("bpf: add helper bpf_perf_prog_read_value")
added helper bpf_perf_prog_read_value so that perf_event type program
can read event counter and enabled/running time.
This commit, however, introduced a bug which allows this helper
for tracepoint type programs. This is incorrect as bpf_perf_prog_read_value
needs to access perf_event through its bpf_perf_event_data_kern type context,
which is not available for tracepoint type program.

This patch fixed the issue by separating bpf_func_proto between tracepoint
and perf_event type programs and removed bpf_perf_prog_read_value
from tracepoint func prototype.

Fixes: 4bebdc7a85aa ("bpf: add helper bpf_perf_prog_read_value")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

test_bpf: Fix testing with CONFIG_BPF_JIT_ALWAYS_ON=y on other arches

Function bpf_fill_maxinsns11 is designed to not be able to be JITed on
x86_64. So, it fails when CONFIG_BPF_JIT_ALWAYS_ON=y, and
commit 09584b406742 ("bpf: fix selftests/bpf test_kmod.sh failure when
CONFIG_BPF_JIT_ALWAYS_ON=y") makes sure that failure is detected on that
case.

However, it does not fail on other architectures, which have a different
JIT compiler design. So, test_bpf has started to fail to load on those.

After this fix, test_bpf loads fine on both x86_64 and ppc64el.

Fixes: 09584b406742 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

kvm/x86: fix icebp instruction handling

The undocumented 'icebp' instruction (aka 'int1') works pretty much like
'int3' in the absense of in-circuit probing equipment (except,
obviously, that it raises #DB instead of raising #BP), and is used by
some validation test-suites as such.

But Andy Lutomirski noticed that his test suite acted differently in kvm
than on bare hardware.

The reason is that kvm used an inexact test for the icebp instruction:
it just assumed that an all-zero VM exit qualification value meant that
the VM exit was due to icebp.

That is not unlike the guess that do_debug() does for the actual
exception handling case, but it's purely a heuristic, not an absolute
rule. do_debug() does it because it wants to ascribe _some_ reasons to
the #DB that happened, and an empty %dr6 value means that 'icebp' is the
most likely casue and we have no better information.

But kvm can just do it right, because unlike the do_debug() case, kvm
actually sees the real reason for the #DB in the VM-exit interruption
information field.

So instead of relying on an inexact heuristic, just use the actual VM
exit information that says "it was 'icebp'".

Right now the 'icebp' instruction isn't technically documented by Intel,
but that will hopefully change. The special "privileged software
exception" information _is_ actually mentioned in the Intel SDM, even
though the cause of it isn't enumerated.

Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RDMA/ucma: Ensure that CM_ID exists prior to access it

Prior to access UCMA commands, the context should be initialized
and connected to CM_ID with ucma_create_id(). In case user skips
this step, he can provide non-valid ctx without CM_ID and cause
to multiple NULL dereferences.

Also there are situations where the create_id can be raced with
other user access, ensure that the context is only shared to
other threads once it is fully initialized to avoid the races.

[  109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[  109.090315] IP: ucma_connect+0x138/0x1d0
[  109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0
[  109.095384] Oops: 0000 [#1] SMP KASAN PTI
[  109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G    B 4.16.0-rc1-00062-g2975d5de6428 #45
[  109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[  109.105943] RIP: 0010:ucma_connect+0x138/0x1d0
[  109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246
[  109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2
[  109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297
[  109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb
[  109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000
[  109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118
[  109.126221] FS:  00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000
[  109.129468] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0
[  109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  109.142057] Call Trace:
[  109.144160]  ? ucma_listen+0x110/0x110
[  109.146386]  ? wake_up_q+0x59/0x90
[  109.148853]  ? futex_wake+0x10b/0x2a0
[  109.151297]  ? save_stack+0x89/0xb0
[  109.153489]  ? _copy_from_user+0x5e/0x90
[  109.155500]  ucma_write+0x174/0x1f0
[  109.157933]  ? ucma_resolve_route+0xf0/0xf0
[  109.160389]  ? __mod_node_page_state+0x1d/0x80
[  109.162706]  __vfs_write+0xc4/0x350
[  109.164911]  ? kernel_read+0xa0/0xa0
[  109.167121]  ? path_openat+0x1b10/0x1b10
[  109.169355]  ? fsnotify+0x899/0x8f0
[  109.171567]  ? fsnotify_unmount_inodes+0x170/0x170
[  109.174145]  ? __fget+0xa8/0xf0
[  109.177110]  vfs_write+0xf7/0x280
[  109.179532]  SyS_write+0xa1/0x120
[  109.181885]  ? SyS_read+0x120/0x120
[  109.184482]  ? compat_start_thread+0x60/0x60
[  109.187124]  ? SyS_read+0x120/0x120
[  109.189548]  do_syscall_64+0xeb/0x250
[  109.192178]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[  109.194725] RIP: 0033:0x7fabb61ebe99
[  109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99
[  109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004
[  109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000
[  109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0
[  109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0
[  109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f
b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff
31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7
[  109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80
[  109.226256] CR2: 0000000000000020

Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <syzbot+36712f50b0552615bf59@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ipv6: old_dport should be a __be16 in __ip6_datagram_connect()

Fixes: 2f987a76a977 ("net: ipv6: keep sk status consistent after datagram connect failure")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.16-20180319' of ssh://gitolite./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2018-03-19

this is a pull reqeust of one patch for net/master.

The patch is by Andri Yngvason and fixes a potential use-after-free bug
in the cc770 driver introduced in the previous pull-request.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: gemini: fix memory leak

cppcheck report:
[drivers/net/ethernet/cortina/gemini.c:543]: (error) Memory leak: skb_tab

Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred

If the optional regulator is deferred, we must release some resources.
They will be re-allocated when the probe function will be called again.

Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: Remove redundant free on error path

The current code performs unneeded free. Remove the redundant skb freeing
during the error path.

Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vmxnet3: remove unused flag "rxcsum" from struct vmxnet3_adapter

Signed-off-by: Igor Pylypiv <ipylypiv@silver-peak.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth

Johan Hedberg says:

====================
Here are a few more important Bluetooth driver fixes for the 4.16
kernel.

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'phy-relax-error-checking'

Grygorii Strashko says:

====================
net: phy: relax error checking when creating sysfs link netdev->phydev

Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per
one netdevice, as result such drivers will produce warning during system
boot and fail to connect second phy to netdevice when PHYLIB framework
will try to create sysfs link netdev->phydev for second PHY
in phy_attach_direct(), because sysfs link with the same name has been
created already for the first PHY.
As result, second CPSW external port will became unusable.
This regression was introduced by commits:
5568363f0cb3 ("net: phy: Create sysfs reciprocal links for attached_dev/phydev"
a3995460491d ("net: phy: Relax error checking on sysfs_create_link()"

Patch 1: exports sysfs_create_link_nowarn() function as preparation for Patch 2.
Patch 2: relaxes error checking when PHYLIB framework is creating sysfs
link netdev->phydev in phy_attach_direct(), suppresses warning by using
sysfs_create_link_nowarn() and adds error message instead, so links creation
failure is not fatal any more and system can continue working,
which fixes TI CPSW issue and makes boot logs accessible
in case of NFS boot, for example.

This can be stable material 4.13+.

Changes in v2:
- commit messages updated.

v1:
https://patchwork.ozlabs.org/cover/886058/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: relax error checking when creating sysfs link netdev->phydev

Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per
one netdevice, as result such drivers will produce warning during system
boot and fail to connect second phy to netdevice when PHYLIB framework
will try to create sysfs link netdev->phydev for second PHY
in phy_attach_direct(), because sysfs link with the same name has been
created already for the first PHY. As result, second CPSW external
port will became unusable.

Fix it by relaxing error checking when PHYLIB framework is creating sysfs
link netdev->phydev in phy_attach_direct(), suppressing warning by using
sysfs_create_link_nowarn() and adding error message instead.
After this change links (phy->netdev and netdev->phy) creation failure is not
fatal any more and system can continue working, which fixes TI CPSW issue.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sysfs: symlink: export sysfs_create_link_nowarn()

The sysfs_create_link_nowarn() is going to be used in phylib framework in
subsequent patch which can be built as module. Hence, export
sysfs_create_link_nowarn() to avoid build errors.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-4.16-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fixes from Tejun Heo:
"Two commits to fix the following subtle cgroup2 behavior bugs:

   - cpu.max was rejecting config when it shouldn't

   - thread mode enable was allowed when it shouldn't"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix rule checking for threaded mode switching
  sched, cgroup: Don't reject lower cpu.max on ancestors

Merge branch 'for-4.16-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fixes from Tejun Heo:
"Two low-impact workqueue commits.

  One fixes workqueue creation error path and the other removes the
  unused cancel_work()"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove unused cancel_work()
  workqueue: use put_device() instead of kfree()

Merge branch 'for-4.16-fixes' of git://git./linux/kernel/git/tj/percpu

Pull percpu fixes from Tejun Heo:
"Late percpu pull request for v4.16-rc6.

   - percpu allocator pool replenishing no longer triggers OOM or
     warning messages.

     Also, the alloc interface now understands __GFP_NORETRY and
     __GFP_NOWARN. This is to allow avoiding OOMs from userland
     triggered actions like bpf map creation.

     Also added cond_resched() in alloc loop.

   - perpcu allocation now can be interrupted by kill sigs to avoid
     deadlocking OOM killer.

   - Added Dennis Zhou as a co-maintainer.

     He has rewritten the area map allocator, understands most of the
     code base and has been responsive for all bug reports"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu_ref: Update doc to dissuade users from depending on internal RCU grace periods
  mm: Allow to kill tasks doing pcpu_alloc() and waiting for pcpu_balance_workfn()
  percpu: include linux/sched.h for cond_resched()
  percpu: add a schedule point in pcpu_balance_workfn()
  percpu: allow select gfp to be passed to underlying allocators
  percpu: add __GFP_NORETRY semantics to the percpu balancing path
  percpu: match chunk allocator declarations with definitions
  percpu: add Dennis Zhou as a percpu co-maintainer

Merge branch 'for-4.16-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
"I sat on them too long and it's quite a few this late, but nothing has
  a wide blast area. The changes are...

   - Fix corner cases in SG command handling.

   - Recent introduction of default powersaving mode config option
     exposed several devices with broken powersaving behaviors. A number
     of patches to update the blacklist accordingly.

   - Fix a kernel panic on SAS hotplug.

   - Other misc and device specific updates"

* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
  libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
  libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
  libata: Enable queued TRIM for Samsung SSD 860
  PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
  ahci: Add PCI-id for the Highpoint Rocketraid 644L card
  ata: do not schedule hot plug if it is a sas host
  libata: disable LPM for Crucial BX100 SSD 500GB drive
  libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
  libata: update documentation for sysfs interfaces
  ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
  libata: transport: cleanup documentation of sysfs interface
  sata_rcar: Reset SATA PHY when Salvator-X board resumes
  libata: don't try to pass through NCQ commands to non-NCQ devices
  libata: remove WARN() for DMA or PIO command without data
  libata: fix length validation of ATAPI-relayed SCSI commands
  ata: libahci: fix comment indentation
  ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
  libata: Fix compile warning with ATA_DEBUG enabled

nfsd: remove blocked locks on client teardown

We had some reports of panics in nfsd4_lm_notify, and that showed a
nfs4_lockowner that had outlived its so_client.

Ensure that we walk any leftover lockowners after tearing down all of
the stateids, and remove any blocked locks that they hold.

With this change, we also don't need to walk the nbl_lru on nfsd_net
shutdown, as that will happen naturally when we tear down the clients.

Fixes: 76d348fadff5 (nfsd: have nfsd4_lock use blocking locks for v4.1+ locks)
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

RDMA/verbs: Remove restrack entry from XRCD structure

XRCD object is not implemented in the restrack, so lets remove it.

Fixes: 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/ucma: Fix use-after-free access in ucma_close

The error in ucma_create_id() left ctx in the list of contexts belong
to ucma file descriptor. The attempt to close this file descriptor causes
to use-after-free accesses while iterating over such list.

Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <syzbot+dcfd344365a56fbebd0f@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

percpu_ref: Update doc to dissuade users from depending on internal RCU grace periods

percpu_ref internally uses sched-RCU to implement the percpu -> atomic
mode switching and the documentation suggested that this could be
depended upon.  This doesn't seem like a good idea.

* percpu_ref uses sched-RCU which has different grace periods regular
  RCU.  Users may combine percpu_ref with regular RCU usage and
  incorrectly believe that regular RCU grace periods are performed by
  percpu_ref.  This can lead to, for example, use-after-free due to
  premature freeing.

* percpu_ref has a grace period when switching from percpu to atomic
  mode.  It doesn't have one between the last put and release.  This
  distinction is subtle and can lead to surprising bugs.

* percpu_ref allows starting in and switching to atomic mode manually
  for debugging and other purposes.  This means that there may not be
  any grace periods from kill to release.

This patch makes it clear that the grace periods are percpu_ref's
internal implementation detail and can't be depended upon by the
users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

mm: Allow to kill tasks doing pcpu_alloc() and waiting for pcpu_balance_workfn()

In case of memory deficit and low percpu memory pages,
pcpu_balance_workfn() takes pcpu_alloc_mutex for a long
time (as it makes memory allocations itself and waits
for memory reclaim). If tasks doing pcpu_alloc() are
choosen by OOM killer, they can't exit, because they
are waiting for the mutex.

The patch makes pcpu_alloc() to care about killing signal
and use mutex_lock_killable(), when it's allowed by GFP
flags. This guarantees, a task does not miss SIGKILL
from OOM killer.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

percpu: include linux/sched.h for cond_resched()

microblaze build broke due to missing declaration of the
cond_resched() invocation added recently. Let's include linux/sched.h
explicitly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>

clk: bcm2835: Protect sections updating shared registers

CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock
handlers and must be accessed with ->regs_lock held.
Update the sections where this protection is missing.

Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: bcm2835: Fix ana->maskX definitions

ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove
the '~' in the definition to fix ANA setup.

Note that this commit fixes a long standing bug preventing one from
using an HDMI display if it's plugged after the FW has booted Linux.
This is because PLLH is used by the HDMI encoder to generate the pixel
clock.

Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version

When commit 9c7be59fc519af ("libata: Apply NOLPM quirk to Crucial MX100
512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk
from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev
to "MU01", where as the entry adding the NOLPM quirk sets it to NULL.

This means that after this commit we no apply the NO_NCQ_TRIM quirk to
all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02"
firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2
quirks, one for the "MU01" firmware and one for all other firmware
versions, so that we once again only apply the NO_NCQ_TRIM quirk to the
"MU01" firmware version.

Fixes: 9c7be59fc519af ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions

Commit b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB
drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs
but limited this to the MU02 firmware version, according to:
http://www.crucial.com/usa/en/support-ssd-firmware

MU02 is the last version, so there are no newer possibly fixed versions
and if the MU02 version has broken LPM then the MU01 almost certainly
also has broken LPM, so this commit changes the quirk to apply to all
firmware versions.

Fixes: b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB...")
Cc: stable@vger.kernel.org
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs

There have been reports of the Crucial M500 480GB model not working
with LPM set to min_power / med_power_with_dipm level.

It has not been tested with medium_power, but that typically has no
measurable power-savings.

Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03
and there is a MU05 update available, but that update does not mention any
LPM fixes in its changelog, so the quirk matches all firmware versions.

In my experience the LPM problems with (older) Crucial SSDs seem to be
limited to higher capacity versions of the SSDs (different firmware?),
so this commit adds a NOLPM quirk for the 480 and 960GB versions of the
M500, to avoid LPM causing issues with these SSDs.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

can: cc770: Fix use after free in cc770_tx_interrupt()

This fixes use after free introduced by the last cc770 patch.

Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Fixes: 746201235b3f ("can: cc770: Fix queue stall & dropped RTR reply")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Linux 4.16-rc6

net: fec: Fix unbalanced PM runtime calls

When unbinding/removing the driver, we will run into the following warnings:

[  259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator
[  259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable!
[  259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[  259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[  259.696239] libphy: fec_enet_mii_bus: probed

Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86/pti updates from Thomas Gleixner:
"Another set of melted spectrum updates:

   - Iron out the last late microcode loading issues by actually
     checking whether new microcode is present and preventing the CPU
     synchronization to run into a timeout induced hang.

   - Remove Skylake C2 from the microcode blacklist according to the
     latest Intel documentation

   - Fix the VM86 POPF emulation which traps if VIP is set, but VIF is
     not. Enhance the selftests to catch that kind of issue

   - Annotate indirect calls/jumps for objtool on 32bit. This is not a
     functional issue, but for consistency sake its the right thing to
     do.

   - Fix a jump label build warning observed on SPARC64 which uses 32bit
     storage for the code location which is casted to 64 bit pointer w/o
     extending it to 64bit first.

   - Add two new cpufeature bits. Not really an urgent issue, but
     provides them for both x86 and x86/kvm work. No impact on the
     current kernel"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Fix CPU synchronization routine
  x86/microcode: Attempt late loading only when new microcode is present
  x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
  jump_label: Fix sparc64 warning
  x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
  x86/vm86/32: Fix POPF emulation
  selftests/x86/entry_from_vm86: Add test cases for POPF
  selftests/x86/entry_from_vm86: Exit with 1 if we fail
  x86/cpufeatures: Add Intel PCONFIG cpufeature
  x86/cpufeatures: Add Intel Total Memory Encryption cpufeature

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
"A single fix for vmalloc_fault() which uses p*d_huge() unconditionally
  whether CONFIG_HUGETLBFS is set or not. In case of CONFIG_HUGETLBFS=n
  this results in a crash as p*d_huge() returns 0 in that case"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix vmalloc_fault to use pXd_large

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
"Three fixes for irq chip drivers:

   - Make sure the allocations in the GIC-V3 ITS driver are large enough
     to accomodate the interrupt space

   - Fix a misplaced __iomem annotation which causes a splat of 26
     sparse warnings

   - Remove an unused function in the IMX GPCV2 driver which causes
     build warnings"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-imx-gpcv2: Remove unused function
  irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis
  irqchip/gic-v3-its: Fix misplaced __iomem annotations

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fix from Thomas Gleixner:
"A single fix to prevent partially initialized pointers in mixed mode
(64bit kernel on 32bit UEFI)"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub/tpm: Initialize pointer variables to zero for mixed mode

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"PPC:
   - fix bug leading to lost IPIs and smp_call_function_many() lockups
     on POWER9

  ARM:
   - locking fix
   - reset fix
   - GICv2 multi-source SGI injection fix
   - GICv2-on-v3 MMIO synchronization fix
   - make the console less verbose.

  x86:
   - fix device passthrough on AMD SME"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix device passthrough when SME is active
  kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3
  KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid
  KVM: arm/arm64: Reduce verbosity of KVM init log
  KVM: arm/arm64: Reset mapped IRQs on VM reset
  KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN
  KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending
  KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry

batman-adv: Fix skbuff rcsum on packet reroute

batadv_check_unicast_ttvn may redirect a packet to itself or another
originator. This involves rewriting the ttvn and the destination address in
the batadv unicast header. These field were not yet pulled (with skb rcsum
update) and thus any change to them also requires a change in the receive
checksum.

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

batman-adv: Add missing include for EPOLL* constants

Fixes: a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

vmxnet3: use correct flag to indicate LRO feature

'Commit 45dac1d6ea04 ("vmxnet3: Changes for vmxnet3 adapter version 2
(fwd)")' introduced a flag "lro" in structure vmxnet3_adapter which is
used to indicate whether LRO is enabled or not. However, the patch
did not set the flag and hence it was never exercised.

So, when LRO is enabled, it resulted in poor TCP performance due to
delayed acks. This issue is seen with packets which are larger than
the mss getting a delayed ack rather than an immediate ack, thus
resulting in high latency.

This patch removes the lro flag and directly uses device features
against NETIF_F_LRO to check if lro is enabled.

Fixes: 45dac1d6ea04 ("vmxnet3: Changes for vmxnet3 adapter version 2 (fwd)")
Reported-by: Rachel Lunnon <rachel_lunnon@stormagic.com>
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vmxnet3: avoid xmit reset due to a race in vmxnet3

The field txNumDeferred is used by the driver to keep track of the number
of packets it has pushed to the emulation. The driver increments it on
pushing the packet to the emulation and the emulation resets it to 0 at
the end of the transmit.

There is a possibility of a race either when (a) ESX is under heavy load or
(b) workload inside VM is of low packet rate.

This race results in xmit hangs when network coalescing is disabled. This
change creates a local copy of txNumDeferred and uses it to perform ring
arithmetic.

Reported-by: Noriho Tanaka <ntanaka@vmware.com>
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tcf_foo_init-NULL-deref'

Davide Caratti says:

====================
net/sched: fix NULL dereference in the error path of .init()

with several TC actions it's possible to see NULL pointer dereference,
when the .init() function calls tcf_idr_alloc(), fails at some point and
then calls tcf_idr_release(): this series fixes all them introducing
non-NULL tests in the .cleanup() function.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix NULL dereference on the error path of tcf_skbmod_init()

when the following command

# tc action replace action skbmod swap mac index 100

is run for the first time, and tcf_skbmod_init() fails to allocate struct
tcf_skbmod_params, tcf_skbmod_cleanup() calls kfree_rcu(NULL), thus
causing the following error:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: __call_rcu+0x23/0x2b0
PGD 8000000034057067 P4D 8000000034057067 PUD 74937067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_skbmod(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache jbd2 crc32_pclmul snd_hda_core ghash_clmulni_intel snd_hwdep pcbc snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd glue_helper snd cryptd virtio_balloon joydev soundcore pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_console virtio_net virtio_blk ata_piix libata crc32c_intel virtio_pci serio_raw virtio_ring virtio i2c_core floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_skbmod]
CPU: 3 PID: 3144 Comm: tc Tainted: G            E    4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__call_rcu+0x23/0x2b0
RSP: 0018:ffffbd2e403e7798 EFLAGS: 00010246
RAX: ffffffffc0872080 RBX: ffff981d34bff780 RCX: 00000000ffffffff
RDX: ffffffff922a5f00 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000021f
R10: 000000003d003000 R11: 0000000000aaaaaa R12: 0000000000000000
R13: ffffffff922a5f00 R14: 0000000000000001 R15: ffff981d3b698c2c
FS:  00007f3678292740(0000) GS:ffff981d3fd80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000007c57a006 CR4: 00000000001606e0
Call Trace:
  __tcf_idr_release+0x79/0xf0
  tcf_skbmod_init+0x1d1/0x210 [act_skbmod]
  tcf_action_init_1+0x2cc/0x430
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.28+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? filemap_map_pages+0x34a/0x3a0
  ? __handle_mm_fault+0xbfd/0xe20
  __sys_sendmsg+0x51/0x90
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f36776a3ba0
RSP: 002b:00007fff4703b618 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fff4703b740 RCX: 00007f36776a3ba0
RDX: 0000000000000000 RSI: 00007fff4703b690 RDI: 0000000000000003
RBP: 000000005aaaba36 R08: 0000000000000002 R09: 0000000000000000
R10: 00007fff4703b0a0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff4703b754 R14: 0000000000000001 R15: 0000000000669f60
Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
RIP: __call_rcu+0x23/0x2b0 RSP: ffffbd2e403e7798
CR2: 0000000000000008

Fix it in tcf_skbmod_cleanup(), ensuring that kfree_rcu(p, ...) is called
only when p is not NULL.

Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix NULL dereference in the error path of tcf_sample_init()

when the following command

# tc action add action sample rate 100 group 100 index 100

is run for the first time, and psample_group_get(100) fails to create a
new group, tcf_sample_cleanup() calls psample_group_put(NULL), thus
causing the following error:

BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
IP: psample_group_put+0x15/0x71 [psample]
PGD 8000000075775067 P4D 8000000075775067 PUD 7453c067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_sample(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core mbcache jbd2 crct10dif_pclmul snd_hwdep crc32_pclmul snd_seq ghash_clmulni_intel pcbc snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev pcspkr i2c_piix4 soundcore virtio_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_net ata_piix virtio_console virtio_blk libata serio_raw crc32c_intel virtio_pci i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_tunnel_key]
CPU: 2 PID: 5740 Comm: tc Tainted: G            E    4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:psample_group_put+0x15/0x71 [psample]
RSP: 0018:ffffb8a80032f7d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000024
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffffc06d93c0
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
R10: 00000000bd003000 R11: ffff979fba04aa59 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff979fbba3f22c
FS:  00007f7638112740(0000) GS:ffff979fbfd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000001c CR3: 00000000734ea001 CR4: 00000000001606e0
Call Trace:
  __tcf_idr_release+0x79/0xf0
  tcf_sample_init+0x125/0x1d0 [act_sample]
  tcf_action_init_1+0x2cc/0x430
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.28+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? filemap_map_pages+0x34a/0x3a0
  ? __handle_mm_fault+0xbfd/0xe20
  __sys_sendmsg+0x51/0x90
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f7637523ba0
RSP: 002b:00007fff0473ef58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fff0473f080 RCX: 00007f7637523ba0
RDX: 0000000000000000 RSI: 00007fff0473efd0 RDI: 0000000000000003
RBP: 000000005aaaac80 R08: 0000000000000002 R09: 0000000000000000
R10: 00007fff0473e9e0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff0473f094 R14: 0000000000000001 R15: 0000000000669f60
Code: be 02 00 00 00 48 89 df e8 a9 fe ff ff e9 7c ff ff ff 0f 1f 40 00 0f 1f 44 00 00 53 48 89 fb 48 c7 c7 c0 93 6d c0 e8 db 20 8c ef <83> 6b 1c 01 74 10 48 c7 c7 c0 93 6d c0 ff 14 25 e8 83 83 b0 5b
RIP: psample_group_put+0x15/0x71 [psample] RSP: ffffb8a80032f7d0
CR2: 000000000000001c

Fix it in tcf_sample_cleanup(), ensuring that calls to psample_group_put(p)
are done only when p is not NULL.

Fixes: cadb9c9fdbc6 ("net/sched: act_sample: Fix error path in init")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix NULL dereference in the error path of tunnel_key_init()

when the following command

# tc action add action tunnel_key unset index 100

is run for the first time, and tunnel_key_init() fails to allocate struct
tcf_tunnel_key_params, tunnel_key_release() dereferences NULL pointers.
This causes the following error:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: tunnel_key_release+0xd/0x40 [act_tunnel_key]
PGD 8000000033787067 P4D 8000000033787067 PUD 74646067 PMD 0
Oops: 0000 [#1] SMP PTI
Modules linked in: act_tunnel_key(E) act_csum ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel pcbc snd_hda_codec snd_hda_core snd_hwdep snd_seq aesni_intel snd_seq_device crypto_simd glue_helper snd_pcm cryptd joydev snd_timer pcspkr virtio_balloon snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk drm virtio_console crc32c_intel ata_piix serio_raw i2c_core virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CPU: 2 PID: 3101 Comm: tc Tainted: G            E    4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tunnel_key_release+0xd/0x40 [act_tunnel_key]
RSP: 0018:ffffba46803b7768 EFLAGS: 00010286
RAX: ffffffffc09010a0 RBX: 0000000000000000 RCX: 0000000000000024
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99ee336d7480
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
R10: 0000000000000220 R11: ffff99ee79d73131 R12: 0000000000000000
R13: ffff99ee32d67610 R14: ffff99ee7671dc38 R15: 00000000fffffff4
FS:  00007febcb2cd740(0000) GS:ffff99ee7fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000007c8e4005 CR4: 00000000001606e0
Call Trace:
  __tcf_idr_release+0x79/0xf0
  tunnel_key_init+0xd9/0x460 [act_tunnel_key]
  tcf_action_init_1+0x2cc/0x430
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.28+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  __sys_sendmsg+0x51/0x90
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7febca6deba0
RSP: 002b:00007ffe7b0dd128 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffe7b0dd250 RCX: 00007febca6deba0
RDX: 0000000000000000 RSI: 00007ffe7b0dd1a0 RDI: 0000000000000003
RBP: 000000005aaa90cb R08: 0000000000000002 R09: 0000000000000000
R10: 00007ffe7b0dcba0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe7b0dd264 R14: 0000000000000001 R15: 0000000000669f60
Code: 44 00 00 8b 0d b5 23 00 00 48 8b 87 48 10 00 00 48 8b 3c c8 e9 a5 e5 d8 c3 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 9f b0 00 00 00 <83> 7b 10 01 74 0b 48 89 df 31 f6 5b e9 f2 fa 7f c3 48 8b 7b 18
RIP: tunnel_key_release+0xd/0x40 [act_tunnel_key] RSP: ffffba46803b7768
CR2: 0000000000000010

Fix this in tunnel_key_release(), ensuring 'param' is not NULL before
dereferencing it.

Fixes: d0f6dd8a914f ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: fix NULL dereference in the error path of tcf_csum_init()

when the following command

# tc action add action csum udp continue index 100

is run for the first time, and tcf_csum_init() fails allocating struct
tcf_csum, tcf_csum_cleanup() calls kfree_rcu(NULL,...). This causes the
following error:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: __call_rcu+0x23/0x2b0
PGD 80000000740b4067 P4D 80000000740b4067 PUD 32e7f067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_csum(E) act_vlan ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd glue_helper cryptd snd joydev pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console ata_piix crc32c_intel libata virtio_pci serio_raw i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_vlan]
CPU: 2 PID: 5763 Comm: tc Tainted: G            E    4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__call_rcu+0x23/0x2b0
RSP: 0018:ffffb275803e77c0 EFLAGS: 00010246
RAX: ffffffffc057b080 RBX: ffff9674bc6f5240 RCX: 00000000ffffffff
RDX: ffffffff928a5f00 RSI: 0000000000000008 RDI: 0000000000000008
RBP: 0000000000000008 R08: 0000000000000001 R09: 0000000000000044
R10: 0000000000000220 R11: ffff9674b9ab4821 R12: 0000000000000000
R13: ffffffff928a5f00 R14: 0000000000000000 R15: 0000000000000001
FS:  00007fa6368d8740(0000) GS:ffff9674bfd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000000073dec001 CR4: 00000000001606e0
Call Trace:
  __tcf_idr_release+0x79/0xf0
  tcf_csum_init+0xfb/0x180 [act_csum]
  tcf_action_init_1+0x2cc/0x430
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.28+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? filemap_map_pages+0x34a/0x3a0
  ? __handle_mm_fault+0xbfd/0xe20
  __sys_sendmsg+0x51/0x90
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7fa635ce9ba0
RSP: 002b:00007ffc185b0fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffc185b10f0 RCX: 00007fa635ce9ba0
RDX: 0000000000000000 RSI: 00007ffc185b1040 RDI: 0000000000000003
RBP: 000000005aaa85e0 R08: 0000000000000002 R09: 0000000000000000
R10: 00007ffc185b0a20 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc185b1104 R14: 0000000000000001 R15: 0000000000669f60
Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
RIP: __call_rcu+0x23/0x2b0 RSP: ffffb275803e77c0
CR2: 0000000000000010

fix this in tcf_csum_cleanup(), ensuring that kfree_rcu(param, ...) is
called only when param is not NULL.

Fixes: 9c5f69bbd75a ("net/sched: act_csum: don't use spinlock in the fast path")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>