ar71xx: add OpenMesh A40 to OpenMesh A60 profile

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: extract ath10k wifi board.bin for the OpenMesh A40 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

package/uboot-envtools: add OpenMesh A40 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

package/om-watchdog: add OpenMesh A40 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: enable sysupgrade for the OpenMesh A40

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: add user-space support for the OpenMesh A40

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: add kernel support for the OpenMesh A40 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: create profile and build image for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: extract ath10k wifi board.bin for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

package/uboot-envtools: add OpenMesh a60 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

package/om-watchdog: add OpenMesh A60 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: enable sysupgrade for the OpenMesh A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

scripts/om-fwupgradecfg-gen.sh: add support for the A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: add user-space support for the OpenMesh A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: add kernel support for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

package/om-watchdog: add OpenMesh OM2Pv4/-HSv4 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: enable sysupgrade for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: add user-space support for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: add kernel support for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ar71xx: Remove the v2/v3 from the OpenMesh profile names

The list of v2/v3 devices is getting longer and makes reading the names of
the profiles unnecessary hard.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

ramips: add v4.9 support

NAND support is missing

Signed-off-by: John Crispin <john@phrozen.org>

ppp: honor ip6table for IPv6 PPP interfaces

as we do for IPv4 PPP interfaces. When we create the
dynamic IPv6 interface we should inherit ip6table from
main interface.

Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>

ppp: add pppoe-discovery to an independent package

pppoe-discovery performs the same discovery process as pppoe, but does
not initiate a session

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

mvebu: append metadata to clearfog sd card images

Fixes the following issue:

root@LEDE:/# sysupgrade /tmp/lede-mvebu-armada-388-clearfog-sdcard.img.gz
Saving metaconfig...
Image metadata not found
Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Image check 'fwtool_check_image' failed.
root@LEDE:/#

Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

sdk: clean scripts/config before packing tarball (FS#504)

Avoids shipping potentially incompatible object files and also reduces
the tarball size

Signed-off-by: Felix Fietkau <nbd@nbd.name>

cns3xxx: disable watchdog until it is fixed

It has been reported to cause random reboots on some devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>

kernel: add missing tracing related config symbols for linux 4.9

Signed-off-by: Felix Fietkau <nbd@nbd.name>

apm821xx: adds missing symbol to v4.9 default config

Signed-off-by: John Crispin <john@phrozen.org>

base-files: Added a deprecation notice on wifi detect

When running wifi detect, the user will be told on error output that
wifi detect is deprecated, that wifi config must be used instead. Also
the commit that changes it is referenced for further info.

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>

base-files: Add wifi config to wifi command usage

Since commit 5f8f8a366136a07df661e31decce2458357c167a wifi detect does
not longer work and wifi config it's used to configure not yet
configured wireless devices.

This commit changes command usage to reflect that change.

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>

ramips: added image size into dwr-512 DT

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>

layerscape: fix adjust_link for 10G & 2.5G

Added a linux-4.4 patch to fix adjust_link for 10G & 2.5G.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>

ramips: correct switch configuration for Newifi D1

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

lantiq: fix patching the wifi mac address on BTHOMEHUBV3A

The firmware hotplug script tries to read the mac address from a
partition with the name "uboot-env" which does not exist (instead it's
name is uboot_env). This broke calculation of the new checksum (after
patching the mac address) which resulted in ath9k refusing to use the
EEPROM data.

The original error reported by ath9k was:
PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
ath: phy0: Bad EEPROM checksum 0x2523
ath: phy0: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:0e.0: Failed to initialize device

Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings
binding/owl-loader")

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

netifd: update to git HEAD version

f107656 netifd: Add option to configure locktime for each device
cdc0e80 interface: add prefix assignment priority support
6397f5e device: add veth support
6228d0f wireless: fix _wireless_add_process
7cc2f10 treewide: fix white space errors

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

mac80211: refresh patches

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mac80211: backport upstream fix for CSA in IBSS mode

Allows to change channels on-the-fly using CSA when using IBSS.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

ar71xx: fix platform_find_rootfspart()

platform_find_rootfspart() fails if the kernel partition comes before the
rootfs partition. The proposed patch fixes this while preserving what I
understand was the original idea: stop at first match.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>

build: fix dependency of kernel_menuconfig target

When running "make kernel_menuconfig" in a clean tree, it fails with:

    make[1]: *** No rule to make target 'tools/quilt/install'.  Stop.

Replacing the dependency with 'tools/quilt/compile' fixes the issue (quilt
and all its prerequisites will be built, and quilt will be installed in
staging_dir).

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>

ath9k: fix various issues in the airtime-fairness implementation

Effects of the bugs could include memory corruption, tx hangs, kernel
crahes, possibly other things as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>

kernel: fix kmod-rxrpc with kernel 4.9

rxkad will be build into af-rxrpc now and is of type boolean.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: fix compile error on linux 4.9 with CONFIG_KALLSYMS disabled

Upstream linux commit 7523e4dc5057e "module: use a structure to
encapsulate layout." moves some of the struct module members into a
separate struct module_layout.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

kernel: MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch

This backports the following fix to our mips IRQ stack patches:
https://patchwork.linux-mips.org/patch/15110/

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

lantiq: fix section mismatch in PCIe driver

Do not put the probe function into the __init section, but use the normal
section. This fixes a section mismatch warning.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ltq-ptm: use netif_trans_update() only for kernel >= 4.7

This fixes a bug introduced in commit c7ce9908bd58af60153716aa64a7251
"ltq-ptm: fix build with kernel 4.9"

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

lantiq: add support for kernel 4.9

The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ltq-vmmc: fix build with kernel 4.9

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ltq-ptm: fix build with kernel 4.9

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: add missing config option for kernel 4.9

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: add rest controller option for kernel 4.9

Deactivate the reset controllers which could be activated on kernel 4.9
by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

glibc: update to version 2.25

Signed-off-by: Felix Fietkau <nbd@nbd.name>

glibc: override default rpath to /lib:/usr/lib

Signed-off-by: Felix Fietkau <nbd@nbd.name>

cns3xxx: clean up patches

Signed-off-by: Felix Fietkau <nbd@nbd.name>

kirkwood: add ZyXEL NSA325 device

This patch add ZyXEL NSA325 2-Bay Media Server

The ZyXEL NSA325 device is a Kirkwood based NAS:

- SoC: Marvell 88F6702 1600Mhz
- SDRAM memory: 512MB DDR2 400Mhz
- Gigabit ethernet: Marvell Alaska
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 5 Status LED (green/red)
- 1 Copy/Sync button
- 1 Reset button
- 2 SATA II ports (internal)
- 2 USB 2.0 ports (back)
- 1 USB 3.0 port (front)
- Fan (fixed speed)
- hardware watchdog in a mcu

Basically a bigger, more powerful version of NSA310,
installation is the same as they share the same flash layout.

A notable difference is that there is a hardware watchdog
in a mcu on the board, which is disabled by default in the LEDE u-boot.
The watchdog is also disabled with a GPIO activation through
raw register change when kwbooting or it would reset the board before
the new uboot was transferred.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]

uboot-kirkwood: add Zyxel NSA325 uboot

add uboot for NSA325

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>

uboot-envtools: add nsa325 envs

adding nsa325 envs for consistency with other kirkwoods

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>

kirkwood: cleanup nsa310b mac address extraction

switch nsa310b mac address reading to mtd_get_mac_ascii helper as
it seems the fw_env.config file is created way later than when
network is set up, when I tested I still had that file included
in the image through /files folder.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>

apm821xx: add linux 4.9 apm821xx patches

This patch updates the apm821xx target to use the 4.9 kernel.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

gdb: update to version 7.12.1, fix glibc 2.25 build issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>

glibc: use default PATCH_DIR

Version configuration is gone, so version specific patch directories are
not necessary either.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

x86: Add configuration back for Traverse Geos

When we merged all the Geode boards into one generic target, the default
network and LED configuration was lost. Put it back.

Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

pppd: fix compile issues with glibc 2.25

Signed-off-by: Felix Fietkau <nbd@nbd.name>

kernel: fix linux 4.9 host tools portability issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>

perf: avoid picking up a dependency on libunwind

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ugps: update to the latest version, fixes build error with glibc

Signed-off-by: Felix Fietkau <nbd@nbd.name>

tcpdump: fix tcpdump-mini build on glibc 2.25

Signed-off-by: Felix Fietkau <nbd@nbd.name>

fstools: update to the latest version

Fixes compatibility issues with glibc 2.25

Signed-off-by: Felix Fietkau <nbd@nbd.name>

procd: update to the latest version

Fixes compatibility issues with glibc 2.25

Signed-off-by: Felix Fietkau <nbd@nbd.name>

toolchain/uclibc: Bump version to 1.0.22

Important change was made in 1.0.18: all sub-libs were merged
in one and only libc similarly to musl.

See [1] for more details.

To support that we had to remove refences to those sub-libs like
libpthread, libcrypt, libdl, libm, libutil etc.

[1] http://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?id=29ff9055c80efe77a7130767a9fcb3ab8c67e8ce

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>

toolchain/uclibc: Fix unmanned configuration with "V=s"

Currently on attempt to configure uClibc with "V=s" user is prompted
to answer on configuration questions. Major inconvenience here is
build procedure get paused until user answers all questions.
That happens because not all symbols are defined in our .config.

Solution is as simple as usage of "olddefconfig" target instead of
simple "oldconfig". In that case default values get silently set
for symbols not defined by our .config explicitly.

We haven't noticed that subtle issue before because without "V=s"
what we do is "make oldconfig < /dev/null" which automatically
answers all questions :)

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>

toolchain: remove separate prepare/ step

It was a leftover from an old obsoleted dependency chain

Signed-off-by: Felix Fietkau <nbd@nbd.name>

imx6: move to Linux 4.9 kernel

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

build: remove libc version config code

We only support one version per libc type

Signed-off-by: Felix Fietkau <nbd@nbd.name>

cns3xxx: add back watchdog support

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ARC: use -mcpu=XXX instead of obsolete -mXXX

-mXXX option is deprecated already in arc-2016.03 toolchain
and removed completely starting from arc-2016.09.

Direct replacement is -mcpu=XXX which is already supported by
arc-2016.03 used today in Lede.

With that change we'll be ready for ARC toolchain update still
keeping everything working with current tools.

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: John Crispin <john@phrozen.org>

kernel: add missing symbols to generic/config-4.9

Signed-off-by: John Crispin <john@phrozen.org>

kernel: fix 304-mips_disable_fpu.patch for v4.9

the function prototype has changed, make the new stub consistent with this
change.

Signed-off-by: John Crispin <john@phrozen.org>

dropbear: enable SHA256 HMACs

The only HMACs currently available use MD5 and SHA1, both of which have known
weaknesses. We already compile in the SHA256 code since we use Curve25519
by default, so there's no significant size penalty to enabling this.

Signed-off-by: Joseph C. Sible <josephcsible@users.noreply.github.com>

cns3xxx: switch to linux 4.9

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

cns3xxx: add preliminary 4.9 support

Adds preliminary kernel 4.9 support for this target.

- Refreshed/Updated all patches

Added 3 new patches:
- 093 --> Add virtual PCI MMIO mapping
- 230 --> Remove deprecated code
- 240 --> Rework AT24 eeprom code to use the new NVMEM API

Compiled & tested on cns3xxx (gw2388)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

build: drop circular dependency

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mxs: enable nvmem support

fixes build error due to missing kernel config options

Signed-off-by: Felix Fietkau <nbd@nbd.name>

kernel: move upstream accepted bcm47xxpart TRX cleanups

Use 0xx prefix for accepted patches.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

mac80211: update brcmfmac backporting brcmf_err cleanups

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

brcm63xx: Add Observa VH4032N support

Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

odhcpd: update to git HEAD version (FS#396)

8df4253 ndp: harden netlink event socket error handling
b02f3e6 ndp: close proc file descriptor also during error handling
8a615ad npd: rework IPv6 relay logic (FS#396)
0129f79 config: restore interface defaults when cleaning interface

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

build: make Host/Install/Default use Host/Compile/Default with an extra argument

Allows parallelizing compile steps that might be necessary during install

Signed-off-by: Felix Fietkau <nbd@nbd.name>

build: Pass -iremap gcc option as a single argument

Passing -iremap argument separately causes problems with projects that
use scons and its ParseFlags function. Consider this SConscript
example:

    env = Environment()
    d = env.ParseFlags("-iremap one:two")

ParseFlags will interpret one:two as a file name and the returned dict
d will contain only "-iremap". When the -iremap is passed to the
compiler without an argument, compilation obviously fails.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>

kernel: remove kmod packages for bridge, stp, llc and 8021q

Remove CONFIG_VLAN_8021Q overrides for two targets
These features are built into the kernel image for all targets

Signed-off-by: Felix Fietkau <nbd@nbd.name>

toolchain/gcc: parallelize make install

If the staging dir was deleted, the build needs to recompile some files.
This change speeds up this corner case significantly

Signed-off-by: Felix Fietkau <nbd@nbd.name>

toolchain/musl: parallelize make install

Signed-off-by: Felix Fietkau <nbd@nbd.name>

cmake: update to version 3.7.2

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>

brcm63xx: Neufbox 6: fix switch by probing through DT

Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

brcm63xx: fix lzma loader for BCM6362

BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

brcm63xx: add support for Pirelli/ADB P.DG AV4202N

This patch adds support for the ADB P.DG AV4202N aka Pirelli PRG AV4202N.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

brcm63xx: setup internal switch leds for bcm6368

Setup the GPIO_MODE register bits for used internal switch port leds.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

brcm63xx: do a full reset phy cycle

Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

brcm63xx: implement gpio_to_irq for bcm63xx-gpio

Add support for mapping some GPIO lines to IRQs. GPIO to IRQ mappings
were found out through experimentation, helped by having the GPIO as
output still toggling the IRQ input.

Based-on: http://patchwork.ozlabs.org/patch/660534/
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

brcm63xx: fix external interrupts on BCM6318

Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>