Merge branch 'pxa-devel' into pxa

[ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'eseries' into pxa

Conflicts:

arch/arm/mach-pxa/Makefile

Merge branch 'pxa-tosa' into pxa

Conflicts:

arch/arm/mach-pxa/Kconfig
arch/arm/mach-pxa/tosa.c
arch/arm/mach-pxa/spitz.c

Merge branches 'pxa-ian' and 'pxa-xm270' into pxa

Conflicts:

MAINTAINERS

Support for LCD on e740 e750 e400 and e800 e-series PDAs

Signed-off-by: Ian Molton <spyro@f2s.com>

E-series UDC support

Signed-off-by: IAn Molton <spyro@f2s.com>

PXA UDC - allow use of inverted GPIO for pullup

Signed-off-by: Ian Molton <spyro@f2s.com>

Add e350 support

Signed-off-by: Ian Molton <spyro@f2s.com>

Fix broken e-series build

Signed-off-by: Ian Molton <spyro@f2s.com>

E-series GPIO / IRQ definitions.

Merge branches 'pxa-ezx', 'pxa-magician' and 'pxa-palm' into pxa

[ARM] 5113/1: PXA SSP: Additional register definitions for PXA3xx SSP

Also add some white space for a little clarity.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5112/1: PXA SSP: Strip in-code changelog

It's not been updated in quite some time and we now have git for
history.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5110/1: PXA SSP: Remember the platform device on probe()

pdev is used later on by dev_printk() so must be set.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5108/2: PXA SSP: Don't unconditionally free interrupt

Callers may stop the SSP core requesting the interrupt so it can't be
freed unconditionally.  Also use NO_IRQ like we should.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5169/1: Defconfig for the EZX machines

This defconfig enables all currently available features. It also builds one
zImage which runs on all machines.

Signed-off-by: Antonio Ospite <ao2@openezx.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5162/1: Common code for the Motorola EZX GSM phones

Common code for the different EZX GSM phones. Functions to control framebuffer,
backlight power, OHCI and UART init.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5161/1: Maintainer entries for the Motorola EZX GSM mobile phones

Maintainer entries for the Motorola EZX GSM mobile phones.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5163/1: pxa27x_udc: Allow choosing the bits in UP2OCR_SEOS

Allow choosing the bits in UP2OCR_SEOS.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5164/1: pxafb: Support for RGB666, RGBT666, RGB888 and RGBT888

Add the .depth field to pxafb_mode_info and use it to set pixel data format
as 18(RGB666), 19(RGBT666), 24(RGB888) or 25(RGBT888)

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5165/1: pxafb: More LCCR3 depth defines

Add missing depth definitions to LCCR3.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5155/1: PalmTX battery monitor

This patch adds battery monitoring driver for PalmTX.
It can read voltage from the battery and temperature.
It also monitors charging/discharging status.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5154/1: PalmTX PCMCIA

This patch adds PCMCIA support for PalmTX handheld computer.
There is one chip hard-soldered to slot0, another slot is
not in use and not accessible.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5153/1: Add support for PalmTX handheld computer

PalmTX is PXA27x based device with wifi, bluetooth,
touchscreen, sdio slot, irda, keypad, nand flash,
pxa framebuffer, serial and usb gadget interface.

Supported by this patch is pxafb, touchscreen, irda,
keypad and sdio slot.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Clocklib: Fix SA1111 clock name mess.

This patch uses the ability of PXA's clocklib to alias clock to resolve the
problem caused by sharing the SA1111 IO controller between PXA and SA1100
architectures, which have differing GPIO numbering.

Signed-off-by: Ian Molton <spyro@f2s.com>

Clocklib: Provide for GPIO 12 clock on PXA

Signed-off-by: Ian Molton <spyro@f2s.com>

Fix serial broken-ness on PXA250

PXA255 and 26x are the only PXA CPUs with HWUART. This patch prevents bogus
initialisation on other models.

Signed-off-by: Ian Molton <spyro@f2s.com>

[ARM] pxa: add support for L2 outer cache on XScale3

The initial patch from Lothar, and Lennert make it into a cleaner
one, modified and tested on PXA320 by Eric Miao.

This patch moves the L2 cache operations out of proc-xsc3.S into
dedicated outer cache support code.

CACHE_XSC3L2 can be deselected so no L2 cache specific code will be
linked in, and that L2 enable bit will not be set, this applies to
the following cases:

    a. _only_ PXA300/PXA310 support included and no L2 cache wanted
    b. PXA320 support included, but want L2 be disabled

So the enabling of L2 depends on two things:

    - CACHE_XSC3L2 is selected
    - and L2 cache is present

Where the latter is only a safeguard (previous testing shows it works
OK even when this bit is turned on).

IXP series of processors with XScale3 cannot disable L2 cache for the
moment since they depend on the L2 cache for its coherent memory, so
IXP may always select CACHE_XSC3L2.

Other L2 relevant bits are always turned on (i.e. the original code
enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side
effects. Specifically, these bits are:

   - OC bits in TTBASE register (table walk outer cache attributes)
   - LLR Outer Cache Attributes (OC) in Auxiliary Control Register

Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: add simple gpio debug LEDs support for zylonite

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: add GPIO expander (PCA9539) support for zylonite

     And also reserve 32 IRQs for the two GPIO expanders.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: add pxa3xx NAND support for littleton

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: add pxa3xx NAND support for zylonite

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: add pxa3xx NAND device and clock sources

A pxa3xx_set_nand_info() is also introduced to set the PXA3xx NAND
driver specific platform_data structure pointer.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: move pxa310 specific MMC3 clk out of generic pxa3xx.c

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: make PXA3xx_CK() and PXA3xx_CKEN() public in clock.h

So processor specific clock sources can be defined in pxa300.c
and pxa320.c.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: add pxa2xx_mfp_set_lpm() to facilitate low power state change

Some boards want to change low power state of pins on-the-fly, this
function helps to facilitate that operation instead of switching
back-n-forth between two configurations with pxa2xx_mfp_config().

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: introduce dedicated __mfp_validate() to check PXA2xx MFP

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: embed body of pxa320_init_mfp()

pxa320_init_mfp() is simple enough to be embedded into pxa320_init()
to simplify the code a bit.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: allow display of uncompress message through STUART

Some boards use UART other than FFUART for the console, E.g. Marvell
PXA3xx Form Factor Platform (aka Littleton) uses STUART. This patch
modifies the uncompress.h so that display of the uncompress message
is routed to the STUART.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: remove WAKEUP_ON_LEVEL_HIGH from keypad direct keys

Setting PKWR bits on those pins will make the resuming from
low power state to fail.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: fix typo of CONFIG_*_MODULE

The correct macro name when a driver is built as a module is
CONFIG_*_MODULE instead of CONFIG_*_MODULES. This patch fixes
this in several places.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: use IORESOURCE_IRQ_* instead of IRQF_* for IRQ resource

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: add codename zylonite for PXA3xx Development Platform

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'machtypes' into pxa-palm

[ARM] 5107/1: Add maintainer entries for the CompuLab CM-X270/EM-X270 machines

Add maintainer entries for the CompuLab CM-X270/EM-X270 machines

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5106/1: CM-X270: remove unneeded cm-x270.h

The include/asm-arm/arch-pxa/cm-x270.h is not used anymore. Remove it.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5105/1: CM-X270: update NAND flash driver to use gpio_lib

Update CM-X270 NAND flash driver to use gpio_lib.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5104/1: CM-X270: PCMCIA updates

Convert to use gpio_lib interface.
Remove support for second PCMCIA slot to avoid run-time conflicts with MMC/SD
because of shared GPIO

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5103/2: CM-X270: update core platform support

Convert CM-X270 pin configuration to use MFP tables.
Make device initialization dependent on respective driver CONFIG_ value (like
in zylonite).
Cleanup includes

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5101/2: EM-X270 updates

Convert EM-X270 pin configuration to use MFP tables and gpio library
Make device initialization dependent on respective driver CONFIG_ value (like
in zylonite)
Add keypad and gpio_key devices

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5138/1: magician: set pwm-backlight .id = -1

There will always be only one pwm-backlight on this device.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5137/1: magician: MACH_MAGICIAN doesn't need to depend on ARCH_PXA

It is only defined inside an "if ARCH_PXA ... endif" block, so the
depends on is not needed.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>?
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5126/1: magician: remove superfluous mtd includes

These were only needed for hardcoded flash partition tables, which were
never submitted. It is better to have the bootloader pass the partition
table to the kernel instead.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5125/1: magician: move gpio pin configuration into __initdata section

The pin configuration array is only used during board init.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5119/1: magician: include linux/gpio.h instead of asm/gpio.h

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5042/1: magician: request GPIOs for pda_power

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5095/2: pcm990: switch from pxa_gpio_mode to pxa2xx_mfp_config

pxa_gpio_mode() is deprecated, use the new pxa2xx_mfp_config() function to
configure GPIOs in pcm990 platform code. Convert "array, ARRAY_SIZE(array)"
to "ARRAY_AND_SIZE(array)" while at it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one
unnecessary menu level

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5142/1: pxa: move move zaurus declarations to proper place

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5088/3: pxa2xx: add pxa2xx_set_spi_info to register pxa2xx-spi platform devices

Add a function to dynamically allocate and register pxa2xx-spi platform
devices, to be used by PXA2xx and PXA3xx based systems. Switch pcm027 and
lubbock to use it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5084/1: zylonite: Register AC97 device

The Zylonite has an AC97 subsystem on it so register the AC97 controller
device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model

As well as moving all the device declarations to a single one in devices.c
this causes all platforms to register the I/O and interrupt resources for
the AC97 controller.

Cc: eric miao <eric.miao@marvell.com>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Jürgen Schindele <linux@schindele.name>
Cc: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers

The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform
driver name changes from pxa2xx-udc to pxa25x-udc) and the
platform driver name of pxa27x_udc.c is fixed to pxa27x-udc.
pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors
and the pxa27x_device_udc is enabled in pxa27x.c.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Including from Ian Molton:

Fixes for mistakes left over from the PXA2{5,7}X UDC split.

Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting
is handled in board code

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5145/1: PXA2xx: provide api to control IrDA pins state

Provide a set of functions to control state of pins dedicated to IrDA.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5144/1: pxaficp_ir: cleanup includes

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: remove pxa_set_cken()

pxa_set_cken() is now unused, remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branches 'pxa-misc', 'pxa-pwm' and 'pxa-multi' into pxa

[ARM] pxa: allow clk aliases

We need to support more than one name+device for a struct clk for a
small number of peripherals.  We do this by re-using struct clk alias
to another struct clk - IOW, if we find that the entry we're using is
an alias, we return the aliased entry not the one we found.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] mach-types update

Update mach-types.  Remove invalid or incorrect entries.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5079/1: Warn people when using pxa2xx-gpio.h

Warn people when using pxa2xx-gpio.h as it is only here for backwards
compatibility. The new mfp-pxa2[57]x.h and the relevant API should be used
instead.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5135/1: pxa: drop superfluous asm/arch/pxa2xx-gpio.h includes

Both i2c-pxa.c and irq.c still include pxa2xx-gpio.h although is is not
needed anymore.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5118/1: pxafb: add exit and remove handlers

This patch adds exit and remove handlers to pxafb so that it can be loaded
and unloaded as a module.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5063/1: pxa: add clk support for pxa2xx I2S

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5152/1: Add myself to tosa maintainers list

Since the beginning of this year I'm providing fixes and updates
for the Sharp SL-6000 (tosa). Add myself as one of the maintainers
of the machine.

Cc: Dirk Opfer <dirk@opfer-online.de>
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5151/1: Tosa: remove double inclusion of linux/delay.h

The patch applies to the linux-next tree.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5150/1: Tosa: support built-in bluetooth power-up

The driver is pretty much generic and will be later shared with
a few other devices, like hx4700 ipaq.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5129/1: tosa: tmio-nand data

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5128/1: tc6393xb: tmio-nand support

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5127/1: Core MFD support

This patch provides a common subdevice registration system for MFD type
chips, using platfrom device.

Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5099/1: Tosa: support AC-in detection.

Add support for ac-in via pda_power device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5098/1: fix sound/soc/pxa/tosa.c to new gpio api

The sound/soc/pxa/tosa.c contains dependencies on parts that never
ever hit mainline. Replace them with current support for tc6393xb.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5097/1: Tosa: support TC6393XB device

Add definitions for Toshiba TC6393XB companion chip and register
the tc6393xb device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller.

Add support for Toshiba TC6393XB companion chip. Currently
only GPIO and part of IRQ features of the device are supported.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5083/2: Tosa: fix IrDA transciver powerup.

On tosa the tranciver LED isn't powered down if
the GPIO47 (STUART_TX) isn't configured as low-level.
Power it down if IrDA is off to save a bit of power.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5089/1: tosa: cleanup includes

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5081/1: tosa: fix SD GPIOs

This changes SD-related GPIO names to be more informative,
and allocates two more SD-related GPIOs.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5064/1: pxa: explicitly specify tosa keyboard GPIOs' low power states to DRIVE_LOW

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5048/2: Clean up tosa and spitz resetting

Use new reset_gpio to reset tosa and spitz PDAs.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5069/1: pxa: include pxa2xx-regs.h in reset.c for RSCR

The RCSR definition was moved into pxa2xx-regs.h.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5047/2: Support resetting by asserting GPIO pin

This adds support for resetting via assertion of GPIO pin.
This e.g. is used on Sharp Zaurus SL-6000.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5094/1: pcm990: Add framebuffer and backlight support

PCM990 boards can be assembled with either a Sharp STN or a NEC TFT LCD. This
patch adds support for these displays and for the backlight, using the pwm_bl
driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5045/1: magician: use the pwm_bl driver for the LCD backlight

magician has a GPIO that modifies the brightness level additionally to
the PWM duty value. This patch makes use of the pwm_bl notify callback
to present userspace with a single brightness scale.
This gets rid of the pxa_set_cken calls and direct PWM register access.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5141/1: PWM: pwm_request() should return an PTR_ERR() instead of NULL.

Make the return of pwm_request() be more informative than just
being NULL on error by using PTR_ERR() to respond with an
approriate error.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5044/1: pwm_bl: add init/notify/exit callbacks

This allows platform code to manipulate GPIOs and brightness level as
needed.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: make LogicPD 270 use the generic PWM backlight driver

Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: make mainstone use the generic PWM backlight driver

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: make zylonite use the generic PWM backlight driver

Patch mostly by Eric Miao, minor edits by rmk.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] pxa: add generic PWM backlight driver

Patch mostly from Eric Miao, with minor edits by rmk to convert
Eric's driver to a generic PWM-based backlight driver.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>