git.openwrt.org Git - openwrt/staging/blogic.git/log

kexec: remove the unused function parameter

This is a cleanup. In function parse_crashkernel_suffix, the parameter
crash_base is not used. So here remove it.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kexec: check if crashk_res_low exists when exclude it from crash mem ranges

Add a check if crashk_res_low exists just like GART region does. If
crashk_res_low doesn't exist, calling exclude_mem_range is unnecessary.

Meanwhile, since crashk_res_low has been initialized at definition, it's
safe just use "if (crashk_low_res.end)" to check if it's exist. And this
can make it consistent with other places of check.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kexec: take the segment adding out of locate_mem_hole functions

In locate_mem_hole functions, a memory hole is located and added as
kexec_segment.  But from the name of locate_mem_hole, it should only take
responsibility of searching a available memory hole to contain data of a
specified size.

So in this patch add a new field 'mem' into kexec_buf, then take that
kexec segment adding code out of locate_mem_hole_top_down and
locate_mem_hole_bottom_up.  This make clear of the functionality of
locate_mem_hole just like it declars to do.  And by this
locate_mem_hole_callback chould be used later if anyone want to locate a
memory hole for other use.

Meanwhile Vivek suggested opening code function __kexec_add_segment(),
that way we have to retreive ksegment pointer once and it is easy to read.
So just do it in this patch and remove __kexec_add_segment() since no one
use it anymore.

Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/x86/purgatory/Makefile: try to use automatic variable in kexec purgatory makefile

Make the Makefile of kexec purgatory be consistent with others in linux
src tree, and make it look generic and simple.

Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump: add %i/%I in core_pattern to report the tid of the crashed thread

format_corename() can only pass the leader's pid to the core handler,
but there is no simple way to figure out which thread originated the
coredump.

As Jan explains, this also means that there is no simple way to create
the backtrace of the crashed process:

As programs are mostly compiled with implicit gcc -fomit-frame-pointer
one needs program's .eh_frame section (equivalently PT_GNU_EH_FRAME
segment) or .debug_frame section.  .debug_frame usually is present only
in separate debug info files usually not even installed on the system.
While .eh_frame is a part of the executable/library (and it is even
always mapped for C++ exceptions unwinding) it no longer has to be
present anywhere on the disk as the program could be upgraded in the
meantime and the running instance has its executable file already
unlinked from disk.

One possibility is to echo 0x3f >/proc/*/coredump_filter and dump all
the file-backed memory including the executable's .eh_frame section.
But that can create huge core files, for example even due to mmapped
data files.

Other possibility would be to read .eh_frame from /proc/PID/mem at the
core_pattern handler time of the core dump.  For the backtrace one needs
to read the register state first which can be done from core_pattern
handler:

    ptrace(PTRACE_SEIZE, tid, 0, PTRACE_O_TRACEEXIT)
    close(0);    // close pipe fd to resume the sleeping dumper
    waitpid();   // should report EXIT
    PTRACE_GETREGS or other requests

The remaining problem is how to get the 'tid' value of the crashed
thread.  It could be read from the first NT_PRSTATUS note of the core
file but that makes the core_pattern handler complicated.

Unfortunately %t is already used so this patch uses %i/%I.

Automatic Bug Reporting Tool (https://github.com/abrt/abrt/wiki/overview)
is experimenting with this.  It is using the elfutils
(https://fedorahosted.org/elfutils/) unwinder for generating the
backtraces.  Apart from not needing matching executables as mentioned
above, another advantage is that we can get the backtrace without saving
the core (which might be quite large) to disk.

[mmilata@redhat.com: final paragraph of changelog]
Signed-off-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Martin Milata <mmilata@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signal: use BUILD_BUG() instead of _NSIG_WORDS_is_unsupported_size()

Kill _NSIG_WORDS_is_unsupported_size(), use BUILD_BUG() instead.  This
simplifies the code, avoids the nested-externs warnings, and this way we
do not defer the problem to linker.

Also, fix the indentation in _SIG_SET_BINOP() and _SIG_SET_OP().

Note: this patch assumes that the code like "if (0) BUILD_BUG();" is
valid.  If not (say __compiletime_error() is not defined and thus
__compiletime_error_fallback() uses a negative array) we should fix
BUILD_BUG() and/or BUILD_BUG_ON_MSG().  This code should be fine by
definition, this is the documented purpose of BUILD_BUG().

[sfr@canb.auug.org.au: fix powerpc build failures]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fat: remove redundant sys_tz declaration

sys_tz is already declared extern struct in include/linux/time.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/reiserfs/journal.c: fix sparse context imbalance warning

Merge conditional unlock/lock in the same condition to avoid sparse
warning:

fs/reiserfs/journal.c:703:36: warning: context imbalance in 'add_to_chunk' - unexpected unlock

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/ufs/balloc.c: remove unused variable

ucg is defined and set in ufs_bitmap_search but never used.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/hfs/hfs_fs.h: remove redundant sys_tz declaration

sys_tz is already declared in include/linux/time.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nilfs2: improve the performance of fdatasync()

Support for fdatasync() has been implemented in NILFS2 for a long time,
but whenever the corresponding inode is dirty the implementation falls
back to a full-flegded sync().  Since every write operation has to
update the modification time of the file, the inode will almost always
be dirty and fdatasync() will fall back to sync() most of the time.  But
this fallback is only necessary for a change of the file size and not
for a change of the various timestamps.

This patch adds a new flag NILFS_I_INODE_SYNC to differentiate between
those two situations.

* If it is set the file size was changed and a full sync is necessary.
* If it is not set then only the timestamps were updated and
   fdatasync() can go ahead.

There is already a similar flag I_DIRTY_DATASYNC on the VFS layer with
the exact same semantics.  Unfortunately it cannot be used directly,
because NILFS2 doesn't implement write_inode() and doesn't clear the VFS
flags when inodes are written out.  So the VFS writeback thread can
clear I_DIRTY_DATASYNC at any time without notifying NILFS2.  So
I_DIRTY_DATASYNC has to be mapped onto NILFS_I_INODE_SYNC in
nilfs_update_inode().

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nilfs2: add missing blkdev_issue_flush() to nilfs_sync_fs()

Under normal circumstances nilfs_sync_fs() writes out the super block,
which causes a flush of the underlying block device.  But this depends
on the THE_NILFS_SB_DIRTY flag, which is only set if the pointer to the
last segment crosses a segment boundary.  So if only a small amount of
data is written before the call to nilfs_sync_fs(), no flush of the
block device occurs.

In the above case an additional call to blkdev_issue_flush() is needed.
To prevent unnecessary overhead, the new flag nilfs->ns_flushed_device
is introduced, which is cleared whenever new logs are written and set
whenever the block device is flushed.  For convenience the function
nilfs_flush_device() is added, which contains the above logic.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/befs/btree.c: remove typedef befs_btree_node

The Linux kernel coding style guidelines suggest not using typedefs for
structure types.  This patch gets rid of the typedef for befs_btree_node.

The following Coccinelle semantic patch detects the case.

@tn1@
type td;
@@

typedef struct { ... } td;

@script:python tf@
td << tn1.td;
tdres;
@@

coccinelle.tdres = td;

@@
type tn1.td;
identifier tf.tdres;
@@

-typedef
struct
+  tdres
   { ... }
-td
;

@@
type tn1.td;
identifier tf.tdres;
@@

-td
+ struct tdres

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-cmos: fix wakeup from S5 without CONFIG_PM_SLEEP

Commit b5ada4600dfd ("drivers/rtc/rtc-cmos.c: fix compilation warning
when !CONFIG_PM_SLEEP") broke wakeup from S5 by making cmos_poweroff a
nop unless CONFIG_PM_SLEEP was defined.

Fix this by restricting the #ifdef to cmos_resume and restoring the old
dependency on CONFIG_PM for cmos_suspend and cmos_poweroff.

Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/Kconfig: Let several drivers depend on HAS_IOMEM to avoid compiling issue

Some drivers need 'devm_ioremap_resource' or 'devm_ioremap' which need
HAS_IOMEM, so let them depend on it.

The related error (with allmodconfig under score):

    MODPOST 1365 modules
  ERROR: "devm_ioremap_resource" [drivers/rtc/rtc-xgene.ko] undefined!
  ERROR: "devm_ioremap_resource" [drivers/rtc/rtc-stk17ta8.ko] undefined!
  ERROR: "devm_ioremap_resource" [drivers/rtc/rtc-ds1742.ko] undefined!
  ERROR: "devm_ioremap_resource" [drivers/rtc/rtc-ds1553.ko] undefined!
  ERROR: "devm_ioremap_resource" [drivers/rtc/rtc-ds1511.ko] undefined!
  ERROR: "devm_ioremap_resource" [drivers/rtc/rtc-ds1286.ko] undefined!
  ERROR: "devm_ioremap" [drivers/rtc/rtc-rp5c01.ko] undefined!
  ERROR: "devm_ioremap" [drivers/rtc/rtc-msm6242.ko] undefined!
  ERROR: "devm_ioremap" [drivers/rtc/rtc-m48t59.ko] undefined!
  ERROR: "devm_ioremap" [drivers/rtc/rtc-m48t35.ko] undefined!
  ERROR: "devm_ioremap" [drivers/rtc/rtc-bq4802.ko] undefined!

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-rs5c372.c: use %*ph to dump small buffers

Instead of pushing each byte let's reduce stack usage by using %*ph specifier.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-pcf8563.c: fix pcf8563_irq() error return value

As pointed out by Sergei Shtylyov, the pcf8563_irq function contains a
bug in the error handling: an interrupt handler is not supposed to
return an errno value but an 'enum irqreturn'.

Let's fix this by returning IRQ_NONE in case of a communication error.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-pcf8563.c: fix uninitialized use warning

gcc-4.9 found a potential condition under which the 'pending' variable
may be used uninitialized:

drivers/rtc/rtc-pcf8563.c: In function 'pcf8563_irq':
drivers/rtc/rtc-pcf8563.c:173:5: warning: 'pending' may be used uninitialized in this function [-Wmaybe-uninitialized]

This is because in the pcf8563_get_alarm_mode() function, we check any
nonzero return of pcf8563_read_block_data, but in the irq function we
only check for negative values, so a possible positive value does not
get detected if the compiler chooses not to inline the entire call
chain.

Checking for any non-zero value in the interrupt handler as well is just
as correct and lets the compiler know what we are doing, without needing
a bogus initialization.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add driver for Maxim 77802 PMIC Real-Time-Clock

The MAX7802 PMIC has a Real-Time-Clock (RTC) with two alarms. This
patch adds support for the RTC and is based on a driver added by Simon
Glass to the Chrome OS kernel 3.8 tree.

[akpm@linux-foundation.org: add comment clarifying ffs() use]
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: max77686: Use ffs() to calculate tm_wday

max77686_rtc_calculate_wday() is used to calculate the day of the week
to be filled in struct rtc_time but that function only calculates the
number of bits shifted. So the ffs() function can be used to find the
first bit set instead of a special function.

[akpm@linux-foundation.org: add comment clarifying ffs() use]
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: max77686: remove unneeded info log

If devm_rtc_device_register() fails a dev_err() is already reported so
there is no need to do an additional dev_info().

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: max77686: fail to probe if no RTC regmap irqchip is set

The max77686 mfd driver adds a regmap IRQ chip which creates an IRQ
domain that is used to map the virtual RTC alarm1 interrupt.

The RTC driver assumes that this will always be true since the PMIC IRQ
is a required property according to the max77686 DT binding doc. If an
"interrupts" property is not defined for a max77686 PMIC, then the mfd
probe function will fail and the RTC platform driver will never be
probed.

But even when it is not possible to probe the rtc-max77686 driver
without a regmap IRQ chip, it's better to explicitly check if the IRQ
chip data is not NULL and gracefully fail instead of getting an OOPS.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: max77686: remove dead code for SMPL and WTSR

The MAX77686 RTC chip has two features called SMPL (Sudden Momentary
Power Loss) and WTSR (Watchdog Timeout and Software Resets). Support
for these features seems to be implemented in the driver but compilation
is disabled using a C pre-processor conditional.

This code has been disabled since the driver was original merged in
commit fca1dd031a28 ("rtc: max77686: add Maxim 77686 driver").

So, since this code has never been built, let's just remove it.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: max77686: Allow the max77686 rtc to wakeup the system

This series add support for the Real Time clock present in the Maxim 77802
Power Managment IC.  The version number is quite high because it
previously was part of a bigger series [0] that aimed to add support for
all the devices in the max77802 PMIC.  But now that the max77802
dependencies were already merged for 3.17, the series were split but I
kept the version numbering.

While working on the max77802 rtc support a lot of feedback was given and
the issues pointed out also apply to a driver for a similar PMIC RTC
(max77686).  So patches 01/06 to 05/06 in the series are cleanups for the
max77686 driver and patch 06/06 adds the support for the max77802 RTC.

The series were tested on an Exynos5250 Snow (max77686) and
Exynos5420 Peach Pit (max77802) machines.

This patch (of 6):

The max77686 includes an RTC that keeps power during suspend.  It's
convenient to be able to use it as a wakeup source.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: bq32000: add trickle charger device tree binding

BQ32000 have "trickle chargers". Introduce a device tree binding for
specifying the trickle charger configuration for that.

Signed-off-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Jason Cooper <jason@lakedameon.net>
Cc: Matti Vaittinen <matti.vaittinen@nsn.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: bq32000: add trickle charger option, with device tree binding

BQ32000 devices have "trickle chargers". Introduce a code to enable the
charger, based on device tree.

Without charger, RTC does not keep time after power off.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pavel Machek <pavel@denx.de>
Cc: Jason Cooper <jason@lakedameon.net>
Cc: Matti Vaittinen <matti.vaittinen@nsn.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: ds1307: add trickle charger device tree binding

Some DS13XX devices have "trickle chargers". Introduce a device tree
binding for specifying the trickle charger configuration for ds1339.

Only ds1339 dt binding is supported because this is the only chip I have.
I _assume_ the code would have worked on other allready supported chips.
However I cannot check the resistor values for the other chips or test
them. For other chips the driver code works as earlier Eg. it does not
check the dt bindings at all

Signed-off-by: Matti Vaittinen <matti.vaittinen@nsn.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pavel Machek <pavel@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: dt-bindings: trickle charger dt binding document for ds1339

Some DS13XX devices have "trickle chargers". Introduce a device tree
binding for the resistor and diode configuration for enabling trickle
charger.

Signed-off-by: Matti Vaittinen <matti.vaittinen@nsn.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pavel Machek <pavel@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clk: RK808: add clkout driver for RK808

This is the initial version of the RK808 PMIC.  This is a power management
IC for multimedia products.  It provides regulators that are able to
supply power to processor cores and other components.  The chip provides
other modules including RTC, Clockout.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com> says:
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RTC: RK808: add RTC driver for RK808

This is the initial version of the RK808 PMIC.  This is a power management
IC for multimedia products.  It provides regulators that are able to
supply power to processor cores and other components.  The chip provides
other modules including RTC, Clockout.

Add RTC driver for supporting RTC device present inside RK808 PMIC.

[akpm@linux-foundation.org: make tm_def static]
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Zhang Qing <zhangqing@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com> says:
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: make of_device_ids const

of_device_ids (i.e. compatible strings and the respective data) are not
supposed to change at runtime. All functions working with of_device_ids
provided by <linux/of.h> work with const of_device_ids. This allows to
mark all struct of_device_id below drivers/rtc const, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM: dts: fix wrong compatible string of Exynos3250 RTC dt node

Fix wrong compatible string of Exynos3250 RTC (Real-Time Clock) dt node.
The RTC of Exynos3250 must need additional source clock (XrtcXTI).

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: s3c: add support for RTC of Exynos3250 SoC

Add support for RTC of Exynos3250 SoC. The Exynos3250 needs source
clock(32.768KHz) for RTC block. If source clock of RTC is registerd on
clock list of common clk framework, Exynos RTC drvier have to control
this clock.

Clock list for s3c-rtc device:
- rtc : CLK_RTC of CLK_GATE_IP_PERIR is gate clock for RTC.
- rtc_src : XrtcXTI is 32.768.kHz source clock for RTC.
(XRTCXTI: Specifies a clock from 32.768 kHz crystal pad with XRTCXTI and
XRTCXTO pins. RTC uses this clock as the source of a real-time clock.)

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: s3c: add s3c_rtc_data structure to use variant data instead of s3c_cpu_type

Add s3c_rtc_data structure to variant data according to SoC type. The
s3c_rtc_data structure includes some functions to control RTC operation
and specific data dependent on SoC type.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: s3c: remove warning message when checking coding style with checkpatch script

Remove warning message when checking codeing style with checkpatch script
and reduce un-necessary i2c read operation on s3c_rtc_enable.

    WARNING: line over 80 characters
    #406: FILE: drivers/rtc/rtc-s3c.c:406:
    + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0) {

    WARNING: line over 80 characters
    #414: FILE: drivers/rtc/rtc-s3c.c:414:
    + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)) {

    WARNING: line over 80 characters
    #422: FILE: drivers/rtc/rtc-s3c.c:422:
    + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)) {

    WARNING: Missing a blank line after declarations
    #451: FILE: drivers/rtc/rtc-s3c.c:451:
    + struct s3c_rtc_drv_data *data;
    + if (pdev->dev.of_node) {

    WARNING: Missing a blank line after declarations
    #453: FILE: drivers/rtc/rtc-s3c.c:453:
    + const struct of_device_id *match;
    + match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);

    WARNING: DT compatible string "samsung,s3c2416-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/
    #650: FILE: drivers/rtc/rtc-s3c.c:650:
    + .compatible = "samsung,s3c2416-rtc",

    WARNING: DT compatible string "samsung,s3c2443-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/
    #653: FILE: drivers/rtc/rtc-s3c.c:653:
    + .compatible = "samsung,s3c2443-rtc",

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: s3c: define s3c_rtc structure to remove global variables.

Define s3c_rtc structure including necessary variables for S3C RTC device
instead of global variables. This patch improves the readability by
removing global variables.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: use c99 initializers in structures

Use c99 initializers for structures.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@

struct i1 {
fs
T fld;
...};

@bad@
identifier decl.i1,i2;
expression e;
initializer list[decl.n] is;
@@

struct i1 i2 = { is,
+ .fld = e
- e
,...};
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: the documentation I wanted to read

This documents autofs from the perspective of what the module actually
supports rather than how automount is expected to use it.

It is formatted using "markdown" and works best with Markdown.pl
(markdown_py doesn't like some constructs).

[rdunlap@infradead.org: copy editing]
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: d_manage() should return -EISDIR when appropriate in rcu-walk mode.

If rcu-walk mode we don't *have* to return -EISDIR for non-mount-traps
as we will simply drop into REF-walk and handling DCACHE_NEED_AUTOMOUNT
dentrys the slow way.  But it is better if we do when possible.

In 'oz_mode', use the same condition as ref-walk: if not a mountpoint,
then it must be -EISDIR.

In regular mode there are most tests needed.  Most of them can be
performed without taking any spinlocks.  If we find a directory that
isn't obviously empty, and isn't mounted on, we need to call
'simple_empty()' which does take a spinlock.  If this turned out to hurt
performance, some other approach could be found to signal when a
directory is known to be empty.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: avoid taking fs_lock during rcu-walk

->fs_lock protects AUTOFS_INF_EXPIRING.  We need to be sure that once
the flag is set, no new references beneath the dentry are taken.  So
rcu-walk currently needs to take fs_lock before checking the flag.  This
hurts performance.

Change the expiry to a two-stage process.  First set AUTOFS_INF_NO_RCU
which forces any path walk into ref-walk mode, then drop the lock and
call synchronize_rcu().  Once that returns we can be sure no rcu-walk is
active beneath the dentry and we can check reference counts again.

Now during an RCU-walk we can test AUTOFS_INF_EXPIRING without taking
the lock as along as we test AUTOFS_INF_NO_RCU too.  If either are set,
we must abort the RCU-walk If neither are set, we know that refcounts
will be tested again after we finish the RCU-walk so we are safe to
continue.

->fs_lock is still taken in d_manage() to check for a non-trap
directory.  That will be resolved in the next patch.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: make "autofs4_can_expire" idempotent.

Have a "test" function change the value it is testing can be confusing,
particularly as a future patch will be calling this function twice.

So move the update for 'last_used' to avoid repeat expiry to the place
where the final determination on what to expire is known.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: factor should_expire() out of autofs4_expire_indirect.

Future patch will potentially call this twice, so make it separate.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: allow RCU-walk to walk through autofs4

This series teaches autofs about RCU-walk so that we don't drop straight
into REF-walk when we hit an autofs directory, and so that we avoid
spinlocks as much as possible when performing an RCU-walk.

This is needed so that the benefits of the recent NFS support for
RCU-walk are fully available when NFS filesystems are automounted.

Patches have been carefully reviewed and tested both with test suites
and in production - thanks a lot to Ian Kent for his support there.

This patch (of 6):

Any attempt to look up a pathname that passes though an autofs4 mount is
currently forced out of RCU-walk into REF-walk.

This can significantly hurt performance of many-thread work loads on
many-core systems, especially if the automounted filesystem supports
RCU-walk but doesn't get to benefit from it.

So if autofs4_d_manage is called with rcu_walk set, only fail with -ECHILD
if it is necessary to wait longer than a spinlock.

Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/ncpfs/dir.c: remove redundant sys_tz declaration

sys_tz is already declared in include/linux/time.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/kallsyms.c: use __seq_open_private()

Reduce boilerplate code by using __seq_open_private() instead of
seq_open() in kallsyms_open().

Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Cc: Gideon Israel Dsouza <gidisrael@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

binfmt_misc: work around gcc-4.9 warning

gcc-4.9 on ARM gives us a mysterious warning about the binfmt_misc
parse_command function:

  fs/binfmt_misc.c: In function 'parse_command.part.3':
  fs/binfmt_misc.c:405:7: warning: array subscript is above array bounds [-Warray-bounds]

I've managed to trace this back to the ARM implementation of memset,
which is called from copy_from_user in case of a fault and which does

#define memset(p,v,n)                                                  \
        ({                                                              \
                void *__p = (p); size_t __n = n;                        \
                if ((__n) != 0) {                                       \
                        if (__builtin_constant_p((v)) && (v) == 0)      \
                                __memzero((__p),(__n));                 \
                        else                                            \
                                memset((__p),(v),(__n));                \
                }                                                       \
                (__p);                                                  \
        })

Apparently gcc gets confused by the check for "size != 0" and believes
that the size might be zero when it gets to the line that does "if
(s[count-1] == '\n')", so it would access data outside of the array.

gcc is clearly wrong here, since this condition was already checked
earlier in the function and the 'size' value can not change in the
meantime.

Fortunately, we can work around it and get rid of the warning by
rearranging the function to check for zero size after doing the
copy_from_user.  It is still safe to pass a zero size into
copy_from_user, so it does not cause any side effects.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

binfmt_misc: touch up documentation a bit

Line wrap the content to 80 cols, and add more details to various fields
to match the code. Drop reference to a website that does not exist
anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

binfmt_misc: expand the register format limit to 1920 bytes

The current code places a 256 byte limit on the registration format.
This ends up being fairly limited when you try to do matching against a
binary format like ELF:

- the magic & mask formats cannot have any embedded NUL chars
   (string_unescape_inplace halts at the first NUL)
- each escape sequence quadruples the size: \x00 is needed for NUL
- trying to match bytes at the start of the file as well as further
   on leads to a lot of \x00 sequences in the mask
- magic & mask have to be the same length (when decoded)
- still need bytes for the other fields
- impossible!

Let's look at a concrete (and common) example: using QEMU to run MIPS
ELFs.  The name field uses 11 bytes "qemu-mipsel".  The interp uses 20
bytes "/usr/bin/qemu-mipsel".  The type & flags takes up 4 bytes.  We
need 7 bytes for the delimiter (usually ":").  We can skip offset.  So
already we're down to 107 bytes to use with the magic/mask instead of
the real limit of 128 (BINPRM_BUF_SIZE).  If people use shell code to
register (which they do the majority of the time), they're down to ~26
possible bytes since the escape sequence must be \x##.

The ELF format looks like (both 32 & 64 bit):

e_ident: 16 bytes
e_type: 2 bytes
e_machine: 2 bytes

Those 20 bytes are enough for most architectures because they have so few
formats in the first place, thus they can be uniquely identified.  That
also means for shell users, since 20 is smaller than 26, they can sanely
register a handler.

But for some targets (like MIPS), we need to poke further.  The ELF fields
continue on:

e_entry: 4 or 8 bytes
e_phoff: 4 or 8 bytes
e_shoff: 4 or 8 bytes
e_flags: 4 bytes

We only care about e_flags here as that includes the bits to identify
whether the ELF is O32/N32/N64.  But now we have to consume another 16
bytes (for 32 bit ELFs) or 28 bytes (for 64 bit ELFs) just to match the
flags.  If every byte is escaped, we send 288 more bytes to the kernel
((20 {e_ident,e_type,e_machine} + 12 {e_entry,e_phoff,e_shoff} + 4
{e_flags}) * 2 {mask,magic} * 4 {escape}) and we've clearly blown our
budget.

Even if we try to be clever and do the decoding ourselves (rather than
relying on the kernel to process \x##), we still can't hit the mark --
string_unescape_inplace treats mask & magic as C strings so NUL cannot
be embedded.  That leaves us with having to pass \x00 for the 12/24
entry/phoff/shoff bytes (as those will be completely random addresses),
and that is a minimum requirement of 48/96 bytes for the mask alone.
Add up the rest and we blow through it (this is for 64 bit ELFs):
magic: 20 {e_ident,e_type,e_machine} + 24 {e_entry,e_phoff,e_shoff} +
       4 {e_flags} = 48              # ^^ See note below.
mask: 20 {e_ident,e_type,e_machine} + 96 {e_entry,e_phoff,e_shoff} +
       4 {e_flags} = 120
Remember above we had 107 left over, and now we're at 168.  This is of
course the *best* case scenario -- you'll also want to have NUL bytes
in the magic & mask too to match literal zeros.

Note: the reason we can use 24 in the magic is that we can work off of the
fact that for bytes the mask would clobber, we can stuff any value into
magic that we want.  So when mask is \x00, we don't need the magic to also
be \x00, it can be an unescaped raw byte like '!'.  This lets us handle
more formats (barely) under the current 256 limit, but that's a pretty
tall hoop to force people to jump through.

With all that said, let's bump the limit from 256 bytes to 1920.  This way
we support escaping every byte of the mask & magic field (which is 1024
bytes by themselves -- 128 * 4 * 2), and we leave plenty of room for other
fields.  Like long paths to the interpreter (when you have source in your
/really/long/homedir/qemu/foo).  Since the current code stuffs more than
one structure into the same buffer, we leave a bit of space to easily
round up to 2k.  1920 is just as arbitrary as 256 ;).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on logging functions with KERN_<LEVEL>

Warn on probable misuses of logging functions with KERN_<LEVEL>
like pr_err(KERN_ERR "foo\n");

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add exception to return then else test

Add an exception to the return before else warning when the line
following it is also a return like:

if (foo)
return bar;
else
return baz;

This form of a test then return is at least as readable as

if (foo)
return bar;
return baz;

so don't emit a warning on the first form.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Elshad Mustafayev <elshadimo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: look for common misspellings

Check for misspellings, based on Debian's lintian list.  Several false
positives were removed, and several additional words added that were
common in the kernel:

backword backwords
invalide valide
recieves
singed unsinged

While going back and fixing existing spelling mistakes isn't a high
priority, it'd be nice to try to catch them before they hit the tree.

In the 13830 commits between 3.15 and 3.16, the script would have noticed
560 spelling mistakes. The top 25 are shown here:

$ git log --pretty=oneline v3.15..v3.16 | wc -l
13830
$ git log --format='%H' v3.15..v3.16 | \
   while read commit ; do \
     echo "commit $commit" ; \
     git log --format=email --stat -p -1 $commit | \
       ./scripts/checkpatch.pl --types=typo_spelling --no-summary - ; \
   done | tee spell_v3.15..v3.16.txt | grep "may be misspelled" | \
   awk '{print $2}' | tr A-Z a-z | sort | uniq -c | sort -rn
     21 'seperate'
     17 'endianess'
     15 'sucess'
     13 'noticable'
     11 'occured'
     11 'accomodate'
     10 'interrup'
      9 'prefered'
      8 'unecessary'
      8 'explicitely'
      7 'supress'
      7 'overriden'
      7 'immediatly'
      7 'funtion'
      7 'defult'
      7 'childs'
      6 'succesful'
      6 'splitted'
      6 'specifc'
      6 'reseting'
      6 'recieve'
      6 'changable'
      5 'tmis'
      5 'singed'
      5 'preceeding'

Thanks to Joe Perches for rewrites, suggestions, additional misspelling
entries, and testing.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn on macros with flow control statements

Macros with flow control statements (goto and return) are not very nice to
read as any flow movement is unexpected.

Try to highlight them and emit a warning on their definition.

Avoid warning on macros that use argument concatenation as those macros
commonly create another function where the concatenation is used in the
function name definition like:

#define FOO_FUNC(name, rtn_type) \
rtn_type func##name(arg1, ...) \
{ \
rtn_type rtn; \
[code...] \
return rtn; \
}

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: remove unnecessary + after {8,8}

There's a useless "+" use that needs to be removed as perl 5.20 emits a
"Useless use of greediness modifier '+'" message each time it's hit.

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add --strict test for concatenated string elements

Using a space between concatenated string elements is easier for a human
to read.

ie:
"String"FOO"bar"

is easier to read as:

"String" FOO "bar"

So suggest this style with a --strict command line option.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: allow optional shorter config descriptions

This script is used by many other projects, and in some of them the
requirement of at least 4 line long description for all Kconfig items is
excessive. This patch adds a command line option to control the required
minimum length.

Tested running this script over a patch including a two line config
description. The script generated a warning when invoked as is, and did
not generate it when invoked with --min-conf-desc-length=2.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: enable whitespace checks for DTS files

When run on *.dtsi or *.dts files, the whitespace checks were skipped,
while they are valid for DTS files. Hence stop skipping them.

I ran checkpatch on all in-tree DTS files, and didn't notice any error or
warning messages that are inappropriate for DTS files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: update $allowed_asm_includes macros, add reboot.h and time.h

Several architectures (e.g. x86, MIPS, Blackfin) have asm/reboot.h and
asm/time.h header files, which are not included in linux/reboot.h and
linux/time.h headers. This lead to generation of false positive errors.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: remove debugging message

An unnecessary --fix debugging left-over is removed.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix spello

The plural of parenthesis is parentheses.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: rename TEST_MODULE to TEST_LKM

The "_MODULE" suffix is reserved for tristates compiled as loadable kernel
modules (LKM).  The "TEST_MODULE" feature thereby violates this
convention.  The feature is used to compile the lib/test_module.c kernel
module.

Sadly this convention is not made explicit, but the Kconfig code documents
it.  The following code (./scripts/kconfig/confdata.c) is used to generate
the autoconf.h header file during the build process.  When a feature is
selected as a kernel module ('m'), it is suffixed with "_MODULE" to
indicate it.

switch (*value) {
case 'n':
break;
case 'm':
suffix = "_MODULE";
/* fall through */

This causes problems for static code analysis, which assumes a consistent
use of the "_MODULE" suffix.

This patch renames the feature and its reference in a Makefile to
"TEST_LKM", which still expresses the test of a LKM.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: remove prio_heap

The prio_heap code is unused since commit 889ed9ceaa97 ("cgroup: remove
css_scan_tasks()"). It should be compiled out to shrink the binary
kernel size which can be done via introducing CONFIG_PRIO_HEAD or by
removing the code.

We can simply recover the code from git when needed, so it would be
better to remove it IMO.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Francesco Fusco <ffusco@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: George Spelvin <linux@horizon.com>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/textsearch.c: remove textsearch_put reference from comments

There is no textsearch_put(). Remove it from the comments to avoid
misunderstanding. Textsearch prepare no longer needs textsearch_put().

Signed-off-by: Raphael Silva <rapphil@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/dynamic_debug.c: use seq_open_private() instead of seq_open()

Using seq_open_private() removes boilerplate code from ddebug_proc_open().

The resultant code is shorter and easier to follow.

This patch does not change any functionality.

Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list: include linux/kernel.h

linux/list.h uses container_of, therefore it depends on linux/kernel.h.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove Chirag Kantharia, invalid e-mail

This removes Chirag Kantharia from the MAINTAINERS file, as his e-mail
address is now rejected by the HP mail server.

Make the driver "Orphan" until he gets back with a working e-mail address
or a new maintainer steps in.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: orphan m32r

Update the maintenance status for m32r

- Removing Hirokazu Takata as maintainer
(last commit merged: Nov. 2009)

- Remove mailing lists that no longer exist,
as the ml.linux-m32r.org subdomain no longer exists.

- Maintenance status moved to "Orphan"

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add atmel nand driver maintainer entry

Add an entry in MAINTAINERS file for ATMEL nand driver.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add entry for Kernel Selftest Framework

Add entry for Kernel Selftest Framework. Individual tests continue to be
maintained by the maintainers for those areas.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: linaro-mm-sig is moderated

Previous patch is awaiting moderator approval for posting to this mailing
list.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove non existent files

Inspired by some recent cleanups in MAINTAINERS the following files (F:)
cannot be found any more in the tree:

* arch/arm/mach-s5pv210/mach-aquila.c
* arch/arm/mach-s5pv210/mach-goni.c

  Those two got removed in commit 28c8331d386a ("ARM: S5PV210: Remove
  support for board files").

Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
* drivers/rtc/rtc-sec.c

  A MAINTAINERS fix was attempted in November 2012, but dismissed as
  rtc-sec.c was still being worked on.  Alas, it's still not there.

  "MAINTAINERS: fix drivers/rtc/rtc-sec.c"
  http://lkml.iu.edu/hypermail/linux/kernel/1211.2/04820.html
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: assign systemace driver to Xilinx

Assign systemace driver to Xilinx Zynq to ensure if there is a change that
someone can even test it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: git rid of [sched_delayed] message for printk_deferred

Commit 458df9fd4815 ("printk: remove separate printk_sched buffers and use
printk buf instead") hardcodes printk_deferred() to KERN_WARNING and
inserts the string "[sched_delayed] " before the actual message.  However
it doesn't take into account the KERN_* prefix of the message, that now
ends up in the middle of the output:

[sched_delayed] ^a4CE: hpet increased min_delta_ns to 20115 nsec

Fix this by just getting rid of the "[sched_delayed] " scnprintf().  The
prefix is useless since 458df9fd4815 anyway since from that moment
printk_deferred() inserts the message into the kernel printk buffer
immediately.  So if the message eventually gets printed to console, it is
printed in the correct order with other messages and there's no need for
any special prefix.  And if the kernel crashes before the message makes it
to console, then prefix in the printk buffer doesn't make the situation
any better.

Link: http://lkml.org/lkml/2014/9/14/4
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: don't bother using LOG_CPU_MAX_BUF_SHIFT on !SMP

When configuring a uniprocessor kernel, don't bother the user with an
irrelevant LOG_CPU_MAX_BUF_SHIFT question, and don't build the unused
code.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers: dma-contiguous: add initialization from device tree

Add a function to create CMA region from previously reserved memory and
add support for handling 'shared-dma-pool' reserved-memory device tree
nodes.

Based on previous code provided by Josh Cartwright <joshc@codeaurora.org>

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Josh Cartwright <joshc@codeaurora.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers: dma-coherent: add initialization from device tree

Initialization procedure of dma coherent pool has been split into two
parts, so memory pool can now be initialized without assigning to
particular struct device.  Then initialized region can be assigned to more
than one struct device.  To protect from concurent allocations from
structure.  The last part of this patch adds support for handling
'shared-dma-pool' reserved-memory device tree nodes.

[akpm@linux-foundation.org: use more appropriate printk facility levels]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Josh Cartwright <joshc@codeaurora.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel: add support for gcc 5

We're missing include/linux/compiler-gcc5.h which is required now
because gcc branched off to v5 in trunk.

Just copy the relevant bits out of include/linux/compiler-gcc4.h,
no new code is added as of now.

This fixes a build error when using gcc 5.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/cma: fix cma bitmap aligned mask computing

The current cma bitmap aligned mask computation is incorrect.  It could
cause an unexpected alignment when using cma_alloc() if the wanted align
order is larger than cma->order_per_bit.

Take kvm for example (PAGE_SHIFT = 12), kvm_cma->order_per_bit is set to
6.  When kvm_alloc_rma() tries to alloc kvm_rma_pages, it will use 15 as
the expected align value.  After using the current implementation however,
we get 0 as cma bitmap aligned mask other than 511.

This patch fixes the cma bitmap aligned mask calculation.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> [3.17]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slab: fix unaligned access on sparc64

Commit bf0dea23a9c0 ("mm/slab: use percpu allocator for cpu cache")
changed the allocation method for cpu cache array from slab allocator to
percpu allocator.  Alignment should be provided for aligned memory in
percpu allocator case, but, that commit mistakenly set this alignment to
0.  So, percpu allocator returns unaligned memory address.  It doesn't
cause any problem on x86 which permits unaligned access, but, it causes
the problem on sparc64 which needs strong guarantee of alignment.

Following bug report is reported from David Miller.

  I'm getting tons of the following on sparc64:

  [603965.383447] Kernel unaligned access at TPC[546b58] free_block+0x98/0x1a0
  [603965.396987] Kernel unaligned access at TPC[546b60] free_block+0xa0/0x1a0
  ...
  [603970.554394] log_unaligned: 333 callbacks suppressed
  ...

This patch provides a proper alignment parameter when allocating cpu
cache to fix this unaligned memory access problem on sparc64.

Reported-by: David Miller <davem@davemloft.net>
Tested-by: David Miller <davem@davemloft.net>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-cpu-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 cpu offlining patch from Ingo Molnar:
"This tree includes a single commit that speeds up x86 suspend/resume
  by replacing a naive 100msec sleep based polling loop with proper
  completion notification.

  This gives some real suspend/resume benefit on servers with larger
  core counts"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smpboot: Speed up suspend/resume by avoiding 100ms sleep for CPU offline during S3

Merge branch 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 cleanups from Ingo Molnar:
"Three small cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tty/serial/8250: Clean up the asm/serial.h include file a bit
  x86/tty/serial/8250: Resolve missing-field-initializers warnings
  x86: Remove obsolete comment in uapi/e820.h

Merge branch 'x86-build-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 build update from Ingo Molnar:
"A single commit that simplifies the no-FPU-ops build options"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kbuild: Eliminate duplicate command line options

Merge branch 'x86-boot-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 bootup updates from Ingo Molnar:
"The changes in this cycle were:

   - Fix rare SMP-boot hang (mostly in virtual environments)

   - Fix build warning with certain (rare) toolchains"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/relocs: Make per_cpu_load_addr static
  x86/smpboot: Initialize secondary CPU only if master CPU will wait for it

Merge branch 'x86-asm-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 asm updates from Ingo Molnar:
"The changes in this cycle were:

   - Speed up the x86 __preempt_schedule() implementation
   - Fix/improve low level asm code debug info annotations"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Unwind-annotate thunk_32.S
  x86: Improve cmpxchg8b_emu.S
  x86: Improve cmpxchg16b_emu.S
  x86/lib/Makefile: Remove the unnecessary "+= thunk_64.o"
  x86: Speed up ___preempt_schedule*() by using THUNK helpers

Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:

   - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
     Hansen)

   - Various sched/idle refinements for better idle handling (Nicolas
     Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)

   - sched/numa updates and optimizations (Rik van Riel)

   - sysbench speedup (Vincent Guittot)

   - capacity calculation cleanups/refactoring (Vincent Guittot)

   - Various cleanups to thread group iteration (Oleg Nesterov)

   - Double-rq-lock removal optimization and various refactorings
     (Kirill Tkhai)

   - various sched/deadline fixes

  ... and lots of other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
  sched/fair: Delete resched_cpu() from idle_balance()
  sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
  sched: Improve sysbench performance by fixing spurious active migration
  sched/x86: Fix up typo in topology detection
  x86, sched: Add new topology for multi-NUMA-node CPUs
  sched/rt: Use resched_curr() in task_tick_rt()
  sched: Use rq->rd in sched_setaffinity() under RCU read lock
  sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
  sched: Use dl_bw_of() under RCU read lock
  sched/fair: Remove duplicate code from can_migrate_task()
  sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
  sched: print_rq(): Don't use tasklist_lock
  sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
  sched: Fix the task-group check in tg_has_rt_tasks()
  sched/fair: Leverage the idle state info when choosing the "idlest" cpu
  sched: Let the scheduler see CPU idle states
  sched/deadline: Fix inter- exclusive cpusets migrations
  sched/deadline: Clear dl_entity params when setscheduling to different class
  sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
  ...

Merge branch 'perf-watchdog-for-linus' of git://git./linux/kernel/git/tip/tip

Pull watchdog fixes from Ingo Molnar:
"Two small watchdog subsystem fixes"

* 'perf-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Fix print-once on enable
watchdog: Remove unnecessary header files

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Two leftover fixes from the v3.17 cycle - these will be forwarded to
  stable as well, if they prove problem-free in wider testing as well"

[ Side note: the "fix perf bug in fork()" fix had also come in through
  Andrew's patch-bomb   - Linus ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf bug in fork()
  perf: Fix unclone_ctx() vs. locking

Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
"Kernel side updates:

   - Fix and enhance poll support (Jiri Olsa)

   - Re-enable inheritance optimization (Jiri Olsa)

   - Enhance Intel memory events support (Stephane Eranian)

   - Refactor the Intel uncore driver to be more maintainable (Zheng
     Yan)

   - Enhance and fix Intel CPU and uncore PMU drivers (Peter Zijlstra,
     Andi Kleen)

   - [ plus various smaller fixes/cleanups ]

  User visible tooling updates:

   - Add +field argument support for --field option, so that one can add
     fields to the default list of fields to show, ie now one can just
     do:

         perf report --fields +pid

     And the pid will appear in addition to the default fields (Jiri
     Olsa)

   - Add +field argument support for --sort option (Jiri Olsa)

   - Honour -w in the report tools (report, top), allowing to specify
     the widths for the histogram entries columns (Namhyung Kim)

   - Properly show submicrosecond times in 'perf kvm stat' (Christian
     Borntraeger)

   - Add beautifier for mremap flags param in 'trace' (Alex Snast)

   - perf script: Allow callchains if any event samples them

   - Don't truncate Intel style addresses in 'annotate' (Alex Converse)

   - Allow profiling when kptr_restrict == 1 for non root users, kernel
     samples will just remain unresolved (Andi Kleen)

   - Allow configuring default options for callchains in config file
     (Namhyung Kim)

   - Support operations for shared futexes.  (Davidlohr Bueso)

   - "perf kvm stat report" improvements by Alexander Yarygin:
       -  Save pid string in opts.target.pid
       -  Enable the target.system_wide flag
       -  Unify the title bar output

   - [ plus lots of other fixes and small improvements.  ]

  Tooling infrastructure changes:

   - Refactor unit and scale function parameters for PMU parsing
     routines (Matt Fleming)

   - Improve DSO long names lookup with rbtree, resulting in great
     speedup for workloads with lots of DSOs (Waiman Long)

   - We were not handling POLLHUP notifications for event file
     descriptors

     Fix it by filtering entries in the events file descriptor array
     after poll() returns, refcounting mmaps so that when the last fd
     pointing to a perf mmap goes away we do the unmap (Arnaldo Carvalho
     de Melo)

   - Intel PT prep work, from Adrian Hunter, including:
       - Let a user specify a PMU event without any config terms
       - Add perf-with-kcore script
       - Let default config be defined for a PMU
       - Add perf_pmu__scan_file()
       - Add a 'perf test' for tracking with sched_switch
       - Add 'flush' callback to scripting API

   - Use ring buffer consume method to look like other tools (Arnaldo
     Carvalho de Melo)

   - hists browser (used in top and report) refactorings, getting rid of
     unused variables and reducing source code size by handling similar
     cases in a fewer functions (Namhyung Kim).

   - Replace thread unsafe strerror() with strerror_r() accross the
     whole tools/perf/ tree (Masami Hiramatsu)

   - Rename ordered_samples to ordered_events and allow setting a queue
     size for ordering events (Jiri Olsa)

   - [ plus lots of fixes, cleanups and other improvements ]"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (198 commits)
  perf/x86: Tone down kernel messages when the PMU check fails in a virtual environment
  perf/x86/intel/uncore: Fix minor race in box set up
  perf record: Fix error message for --filter option not coming after tracepoint
  perf tools: Fix build breakage on arm64 targets
  perf symbols: Improve DSO long names lookup speed with rbtree
  perf symbols: Encapsulate dsos list head into struct dsos
  perf bench futex: Sanitize -q option in requeue
  perf bench futex: Support operations for shared futexes
  perf trace: Fix mmap return address truncation to 32-bit
  perf tools: Refactor unit and scale function parameters
  perf tools: Fix line number in the config file error message
  perf tools: Convert {record,top}.call-graph option to call-graph.record-mode
  perf tools: Introduce perf_callchain_config()
  perf callchain: Move some parser functions to callchain.c
  perf tools: Move callchain config from record_opts to callchain_param
  perf hists browser: Fix callchain print bug on TUI
  perf tools: Use ACCESS_ONCE() instead of volatile cast
  perf tools: Modify error code for when perf_session__new() fails
  perf tools: Fix perf record as non root with kptr_restrict == 1
  perf stat: Fix --per-core on multi socket systems
  ...

Merge branch 'locking-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core locking updates from Ingo Molnar:
"The main updates in this cycle were:

   - mutex MCS refactoring finishing touches: improve comments, refactor
     and clean up code, reduce debug data structure footprint, etc.

   - qrwlock finishing touches: remove old code, self-test updates.

   - small rwsem optimization

   - various smaller fixes/cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Revert qrwlock recusive stuff
  locking/rwsem: Avoid double checking before try acquiring write lock
  locking/rwsem: Move EXPORT_SYMBOL() lines to follow function definition
  locking/rwlock, x86: Delete unused asm/rwlock.h and rwlock.S
  locking/rwlock, x86: Clean up asm/spinlock*.h to remove old rwlock code
  locking/semaphore: Resolve some shadow warnings
  locking/selftest: Support queued rwlock
  locking/lockdep: Restrict the use of recursive read_lock() with qrwlock
  locking/spinlocks: Always evaluate the second argument of spin_lock_nested()
  locking/Documentation: Update locking/mutex-design.txt disadvantages
  locking/Documentation: Move locking related docs into Documentation/locking/
  locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate
  locking/mutexes: Refactor optimistic spinning code
  locking/mcs: Remove obsolete comment
  locking/mutexes: Document quick lock release when unlocking
  locking/mutexes: Standardize arguments in lock/unlock slowpaths
  locking: Remove deprecated smp_mb__() barriers

Merge branch 'locking-arch-for-linus' of git://git./linux/kernel/git/tip/tip

Pull arch atomic cleanups from Ingo Molnar:
"This is a series kept separate from the main locking tree, which
  cleans up and improves various details in the atomics type handling:

   - Remove the unused atomic_or_long() method

   - Consolidate and compress atomic ops implementations between
     architectures, to reduce linecount and to make it easier to add new
     ops.

   - Rewrite generic atomic support to only require cmpxchg() from an
     architecture - generate all other methods from that"

* 'locking-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  locking,arch: Use ACCESS_ONCE() instead of cast to volatile in atomic_read()
  locking, mips: Fix atomics
  locking, sparc64: Fix atomics
  locking,arch: Rewrite generic atomic support
  locking,arch,xtensa: Fold atomic_ops
  locking,arch,sparc: Fold atomic_ops
  locking,arch,sh: Fold atomic_ops
  locking,arch,powerpc: Fold atomic_ops
  locking,arch,parisc: Fold atomic_ops
  locking,arch,mn10300: Fold atomic_ops
  locking,arch,mips: Fold atomic_ops
  locking,arch,metag: Fold atomic_ops
  locking,arch,m68k: Fold atomic_ops
  locking,arch,m32r: Fold atomic_ops
  locking,arch,ia64: Fold atomic_ops
  locking,arch,hexagon: Fold atomic_ops
  locking,arch,cris: Fold atomic_ops
  locking,arch,avr32: Fold atomic_ops
  locking,arch,arm64: Fold atomic_ops
  locking,arch,arm: Fold atomic_ops
  ...

Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/tip

Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:

   - changes related to No-CBs CPUs and NO_HZ_FULL

   - RCU-tasks implementation

   - torture-test updates

   - miscellaneous fixes

   - locktorture updates

   - RCU documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
  workqueue: Use cond_resched_rcu_qs macro
  workqueue: Add quiescent state between work items
  locktorture: Cleanup header usage
  locktorture: Cannot hold read and write lock
  locktorture: Fix __acquire annotation for spinlock irq
  locktorture: Support rwlocks
  rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
  locktorture: Document boot/module parameters
  rcutorture: Rename rcutorture_runnable parameter
  locktorture: Add test scenario for rwsem_lock
  locktorture: Add test scenario for mutex_lock
  locktorture: Make torture scripting account for new _runnable name
  locktorture: Introduce torture context
  locktorture: Support rwsems
  locktorture: Add infrastructure for torturing read locks
  torture: Address race in module cleanup
  locktorture: Make statistics generic
  locktorture: Teach about lock debugging
  locktorture: Support mutexes
  locktorture: Add documentation
  ...

Merge tag 'xfs-for-linus-3.18-rc1' of git://git./linux/kernel/git/dgc/linux-xfs

Pull xfs update from Dave Chinner:
"This update contains:
   - various cleanups
   - log recovery debug hooks
   - seek hole/data implementation merge
   - extent shift rework to fix collapse range bugs
   - various sparse warning fixes
   - log recovery transaction processing rework to fix use after free
     bugs
   - metadata buffer IO infrastructuer rework to ensure all buffers
     under IO have valid reference counts
   - various fixes for ondisk flags, writeback and zero range corner
     cases"

* tag 'xfs-for-linus-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (56 commits)
  xfs: fix agno increment in xfs_inumbers() loop
  xfs: xfs_iflush_done checks the wrong log item callback
  xfs: flush the range before zero range conversion
  xfs: restore buffer_head unwritten bit on ioend cancel
  xfs: check for null dquot in xfs_quota_calc_throttle()
  xfs: fix crc field handling in xfs_sb_to/from_disk
  xfs: don't send null bp to xfs_trans_brelse()
  xfs: check for inode size overflow in xfs_new_eof()
  xfs: only set extent size hint when asked
  xfs: project id inheritance is a directory only flag
  xfs: kill time.h
  xfs: compat_xfs_bstat does not have forkoff
  xfs: simplify xfs_zero_remaining_bytes
  xfs: check xfs_buf_read_uncached returns correctly
  xfs: introduce xfs_buf_submit[_wait]
  xfs: kill xfs_bioerror_relse
  xfs: xfs_bioerror can die.
  xfs: kill xfs_bdstrat_cb
  xfs: rework xfs_buf_bio_endio error handling
  xfs: xfs_buf_ioend and xfs_buf_iodone_work duplicate functionality
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs updates from Al Viro:
"The big thing in this pile is Eric's unmount-on-rmdir series; we
  finally have everything we need for that.  The final piece of prereqs
  is delayed mntput() - now filesystem shutdown always happens on
  shallow stack.

  Other than that, we have several new primitives for iov_iter (Matt
  Wilcox, culled from his XIP-related series) pushing the conversion to
  ->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
  cleanups and fixes (including the external name refcounting, which
  gives consistent behaviour of d_move() wrt procfs symlinks for long
  and short names alike) and assorted cleanups and fixes all over the
  place.

  This is just the first pile; there's a lot of stuff from various
  people that ought to go in this window.  Starting with
  unionmount/overlayfs mess...  ;-/"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
  fs/file_table.c: Update alloc_file() comment
  vfs: Deduplicate code shared by xattr system calls operating on paths
  reiserfs: remove pointless forward declaration of struct nameidata
  don't need that forward declaration of struct nameidata in dcache.h anymore
  take dname_external() into fs/dcache.c
  let path_init() failures treated the same way as subsequent link_path_walk()
  fix misuses of f_count() in ppp and netlink
  ncpfs: use list_for_each_entry() for d_subdirs walk
  vfs: move getname() from callers to do_mount()
  gfs2_atomic_open(): skip lookups on hashed dentry
  [infiniband] remove pointless assignments
  gadgetfs: saner API for gadgetfs_create_file()
  f_fs: saner API for ffs_sb_create_file()
  jfs: don't hash direct inode
  [s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
  ecryptfs: ->f_op is never NULL
  android: ->f_op is never NULL
  nouveau: __iomem misannotations
  missing annotation in fs/file.c
  fs: namespace: suppress 'may be used uninitialized' warnings
  ...

Merge branch 'xfs-misc-fixes-for-3.18-3' into for-next

xfs: fix agno increment in xfs_inumbers() loop

caused a regression in xfs_inumbers, which in turn broke
xfsdump, causing incomplete dumps.

The loop in xfs_inumbers() needs to fill the user-supplied
buffers, and iterates via xfs_btree_increment, reading new
ags as needed.

But the first time through the loop, if xfs_btree_increment()
succeeds, we continue, which triggers the ++agno at the bottom
of the loop, and we skip to soon to the next ag - without
the proper setup under next_ag to read the next ag.

Fix this by removing the agno increment from the loop conditional,
and only increment agno if we have actually hit the code under
the next_ag: target.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

fs/file_table.c: Update alloc_file() comment

This comment is 5 years outdated; init_file() no longer exists.

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs: Deduplicate code shared by xattr system calls operating on paths

The following pairs of system calls dealing with extended attributes only
differ in their behavior on whether the symbolic link is followed (when
the named file is a symbolic link):

- setxattr() and lsetxattr()
- getxattr() and lgetxattr()
- listxattr() and llistxattr()
- removexattr() and lremovexattr()

Despite this, the implementations all had duplicated code, so this commit
redirects each of the above pairs of system calls to a corresponding
function to which different lookup flags (LOOKUP_FOLLOW or 0) are passed.

For me this reduced the stripped size of xattr.o from 8824 to 8248 bytes.

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

reiserfs: remove pointless forward declaration of struct nameidata

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

don't need that forward declaration of struct nameidata in dcache.h anymore

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

take dname_external() into fs/dcache.c

never used outside and it's too low-level for legitimate uses outside
of fs/dcache.c anyway

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

let path_init() failures treated the same way as subsequent link_path_walk()

As it is, path_lookupat() and path_mounpoint() might end up leaking struct file
reference in some cases.

Spotted-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>