Stefan Roese [Fri, 31 Mar 2006 13:18:37 +0000 (15:18 +0200)]
Reorder CHANGELOG
Stefan Roese [Fri, 17 Mar 2006 09:28:24 +0000 (10:28 +0100)]
Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
405 SDRAM: - The SDRAM parameters can now be defined in the board
config file and the 405 SDRAM controller values will
be calculated upon bootup (see PPChameleonEVB).
When those settings are not defined in the board
config file, the register setup will be as it is now,
so this implementation should not break any current
design using this code.
Thanks to Andrea Marson from DAVE for this patch.
440 DDR: - Added function sdram_tr1_set to auto calculate the
TR1 value for the DDR.
- Added ECC support (see p3p440).
Patch by Stefan Roese, 17 Mar 2006
Wolfgang Denk [Thu, 23 Mar 2006 16:10:30 +0000 (17:10 +0100)]
Enable Quad UART om MCC200 board.
Wolfgang Denk [Tue, 21 Mar 2006 00:58:07 +0000 (01:58 +0100)]
Cleanup MCC200 board configuration; omit non-existent stuff.
Wolfgang Denk [Sun, 19 Mar 2006 00:01:51 +0000 (01:01 +0100)]
Update CHANGELOG
Wolfgang Denk [Sat, 18 Mar 2006 22:31:12 +0000 (23:31 +0100)]
Add support for MPC859/866 Rev. A.0
Wolfgang Denk [Fri, 17 Mar 2006 16:41:56 +0000 (17:41 +0100)]
Merge with port of MPC8349EMDS board
Wolfgang Denk [Fri, 17 Mar 2006 10:42:53 +0000 (11:42 +0100)]
Add support for Lite5200B board.
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
Rafal Jaworowski [Thu, 16 Mar 2006 16:46:46 +0000 (17:46 +0100)]
Support for DDR with 32-data path. Addotional notes on injecting
multiple-bit errors.
Marian Balakowicz [Thu, 16 Mar 2006 14:19:35 +0000 (15:19 +0100)]
Add command for handling DDR ECC registers on MPC8349EE MDS board.
Marian Balakowicz [Thu, 16 Mar 2006 13:35:32 +0000 (14:35 +0100)]
Fix DDR ECC bit definitions for MPC83xx.
Marian Balakowicz [Tue, 14 Mar 2006 15:24:38 +0000 (16:24 +0100)]
Add initial support for MPC8349E MDS board.
Marian Balakowicz [Tue, 14 Mar 2006 15:23:35 +0000 (16:23 +0100)]
Add support for ECC DDR initialization on MPC83xx.
Marian Balakowicz [Tue, 14 Mar 2006 15:14:48 +0000 (16:14 +0100)]
Add DMA support for MPC83xx.
Marian Balakowicz [Tue, 14 Mar 2006 15:12:48 +0000 (16:12 +0100)]
Add sync in do_reset() routine for MPC83xx after RPR register
was written to. It is need on some targets when BAT translation
is enabled.
Marian Balakowicz [Tue, 14 Mar 2006 15:03:46 +0000 (16:03 +0100)]
Add bit definitions for MPC83xx DDR controller registers.
Marian Balakowicz [Tue, 14 Mar 2006 15:02:31 +0000 (16:02 +0100)]
Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
Marian Balakowicz [Tue, 14 Mar 2006 15:01:25 +0000 (16:01 +0100)]
Correct shift offsets in icache_status and dcache_status for MPC83xx.
Marian Balakowicz [Tue, 14 Mar 2006 14:59:25 +0000 (15:59 +0100)]
Add support for DS1374 RTC chip.
Wolfgang Denk [Mon, 13 Mar 2006 11:37:35 +0000 (12:37 +0100)]
Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006
Wolfgang Denk [Mon, 13 Mar 2006 11:22:03 +0000 (12:22 +0100)]
Fix CHANGELOG entry (patch date)
Stefan Roese [Mon, 13 Mar 2006 10:16:36 +0000 (11:16 +0100)]
Change max size of uncompressed uImage's to 8MByte and add
CFG_BOOTM_LEN to adjust this setting.
As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
uImages was restricted to 4MBytes. This default size is now
increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
in the board config file.
Patch by Stefan Roese, 13 Mar 2006
Stefan Roese [Mon, 13 Mar 2006 08:43:01 +0000 (09:43 +0100)]
Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
Patch by Stefan Roese, 13 Mar 2006
Stefan Roese [Mon, 13 Mar 2006 08:42:28 +0000 (09:42 +0100)]
cpu/ppc4xx/start.S : exceptions are enabled after relocation
Patch by Cedric Vincent, 6 June 2005
Wolfgang Denk [Mon, 13 Mar 2006 00:00:22 +0000 (01:00 +0100)]
au1x00_eth.c: check malloc return value and abort if it failed
Patch by Andrew Dyer, 26 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 23:50:48 +0000 (00:50 +0100)]
Change the sequence of events in soft_i2c.c:send_ack() to keep from
incorrectly generating start/stop conditions on the bus.
Patch by Andrew Dyer, 26 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 23:46:05 +0000 (00:46 +0100)]
Fix bug in [id]cache_status commands for MPC85xx processors;
should look at LSB of L1CSRn registers to determine if L1 cache is
enabled, not the MSB.
Patch by Murray Jensen, 19 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 22:27:46 +0000 (23:27 +0100)]
Fix array overflow with fw_setenv on uninitialised environment
Patch by Murray Jensen, 15 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 22:17:31 +0000 (23:17 +0100)]
Add support for EmbeddedPlanet EP88x boards
Patch by Yuli Barcohen, 13 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 22:13:27 +0000 (23:13 +0100)]
Remove board specific configuration includes from the common xilinx
ethernet and iic adapter code.
Patch by Michael Libeskind, 12 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 21:50:55 +0000 (22:50 +0100)]
Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
Patch by Murray Jensen, 08 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 21:45:47 +0000 (22:45 +0100)]
Add (some) definitions for the MPC85xx local bus controller
Patch by Murray Jensen, 08 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 21:41:33 +0000 (22:41 +0100)]
Add CPM2 I/O pin functions for MPC85xx processors
Patch by Murray Jensen, 08 Jul 2005
Wolfgang Denk [Sun, 12 Mar 2006 21:14:20 +0000 (22:14 +0100)]
Fix compile problem
Wolfgang Denk [Sun, 12 Mar 2006 20:49:19 +0000 (21:49 +0100)]
Merge ... git://git./boot/u-boot/u-boot.git#mpc8349ads
Wolfgang Denk [Sun, 12 Mar 2006 20:33:52 +0000 (21:33 +0100)]
Merge ... git://git./boot/u-boot/u-boot.git#mpc83xx
Wolfgang Denk [Sun, 12 Mar 2006 20:31:38 +0000 (21:31 +0100)]
Merge ... git://git./boot/u-boot/u-boot.git#pci
Wolfgang Denk [Sun, 12 Mar 2006 18:11:42 +0000 (19:11 +0100)]
Merge ... git://git./boot/u-boot/u-boot.git#ft_infr
Wolfgang Denk [Sun, 12 Mar 2006 17:26:46 +0000 (18:26 +0100)]
Add support for the DHCP vendor optional bootfile (#67).
Ignores the vendor TFTP server name option (#66).
Patch by Murray Jensen, 30 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 17:09:47 +0000 (18:09 +0100)]
Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
Patch by Andy Fleming, 14 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 17:06:37 +0000 (18:06 +0100)]
Fix bad register definitions for LTX971 PHY on MPC85xx boards.
Patch by Gerhard Jaeger, 21 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 15:57:35 +0000 (16:57 +0100)]
Add netconsole and some more commands to RPXlite_DW board
Patch by Sam Song, 19 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 15:54:11 +0000 (16:54 +0100)]
Fix bad declaration on pci_cfgfunc_nothing
Patch by Sam Song, 19 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 15:51:59 +0000 (16:51 +0100)]
Adjust "echo" as a default command
Patch by Sam Song, 19 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 15:14:29 +0000 (16:14 +0100)]
Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
Patch by KokHow Teh, 16 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 15:05:05 +0000 (16:05 +0100)]
Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
Patch by Rick Bronson, 15 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 01:55:22 +0000 (02:55 +0100)]
Coding Style cleanup
Wolfgang Denk [Sun, 12 Mar 2006 01:20:55 +0000 (02:20 +0100)]
Avoid dereferencing NULL in find_cmd() if no valid commands were found
Patch by Andrew Dyer, 13 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 01:12:27 +0000 (02:12 +0100)]
Add missing Blackfin files.
Wolfgang Denk [Sun, 12 Mar 2006 01:10:00 +0000 (02:10 +0100)]
Add ADI Blackfin support
- add support for Analog Devices Blackfin BF533 CPU
- add support for the ADI BF533 Stamp uClinux board
- add support for the ADI BF533 EZKit board
Patches by Richard Klingler, June 11th 2005:
Wolfgang Denk [Sun, 12 Mar 2006 00:59:35 +0000 (01:59 +0100)]
Add loads of ntohl() in image header handling
Patch by Steven Scholz, 10 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:55:43 +0000 (01:55 +0100)]
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:48:55 +0000 (01:48 +0100)]
RPXlite configuration fixes
- Use correct flash sector size
- Use correct memory test end address
- Add support for bzip2 compression
- Various small fixes
Patch by Yuli Barcohen, 05 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:45:44 +0000 (01:45 +0100)]
Memory configuration changes for ZPC.1900 board
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:43:03 +0000 (01:43 +0100)]
Add support for Adder boards with 16MB SDRAM;
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:40:01 +0000 (01:40 +0100)]
Fix conditional for including ks8695eth driver
Patch by Greg Ungerer, 04 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:37:50 +0000 (01:37 +0100)]
Fix Makefile: include config.mk only after CROSS_COMPILE is defined
Patch by Friedrich Lobenstock, 02 Jun 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:30:45 +0000 (01:30 +0100)]
Fix comment in common/soft_i2c.c
Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:23:43 +0000 (01:23 +0100)]
Cleanup compiler warnings.
Patch by Greg Ungerer, 21 May 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:21:19 +0000 (01:21 +0100)]
Word alignment fixes for word aligned NS16550 UART
Patch by Jean-Paul Saman, 01 Mar 2005
Wolfgang Denk [Sun, 12 Mar 2006 00:13:30 +0000 (01:13 +0100)]
Fix behaviour if gatewayip is not set
Patch by Robin Gilks, 23 Dec 2004
Wolfgang Denk [Sat, 11 Mar 2006 23:04:20 +0000 (00:04 +0100)]
Fix cleanup for netstart board.
Remove build results from repository
Wolfgang Denk [Sat, 11 Mar 2006 22:07:09 +0000 (23:07 +0100)]
More GCC 4.x woes
Wolfgang Denk [Sat, 11 Mar 2006 21:56:07 +0000 (22:56 +0100)]
More GCC 4.x code cleanup
Wolfgang Denk [Sat, 11 Mar 2006 21:53:33 +0000 (22:53 +0100)]
Some code cleanup for GCC 4.x
Wolfgang Denk [Sat, 11 Mar 2006 18:15:27 +0000 (19:15 +0100)]
Update CHANGELOG
Markus Klotzbücher [Thu, 9 Mar 2006 09:38:46 +0000 (10:38 +0100)]
Merge with http://www.denx.de/git/u-boot.git
Wolfgang Denk [Wed, 8 Mar 2006 15:59:03 +0000 (16:59 +0100)]
Merge with /home/tur/nand/u-boot
Markus Klotzbücher [Wed, 8 Mar 2006 09:24:21 +0000 (10:24 +0100)]
Merge /home/tur/nand/u-boot/
Bartlomiej Sieka [Wed, 8 Mar 2006 07:32:43 +0000 (08:32 +0100)]
Fixed a bug in saveenv(). Credit: Markus Klotzbuecher.
> @@ -115,7 +115,7 @@ int saveenv(void)
Markus Klotzbücher [Tue, 7 Mar 2006 23:13:40 +0000 (00:13 +0100)]
Enable simple (non-redundant) NAND environment on delta board.
Markus Klotzbuecher [Tue, 7 Mar 2006 23:04:04 +0000 (00:04 +0100)]
Some minor fixes to environment in NAND code.
Wolfgang Denk [Mon, 6 Mar 2006 23:33:28 +0000 (00:33 +0100)]
Add support for Intel Monahans CPU on Zylonite and Delta boards
(This is Work in Progress!)
Wolfgang Denk [Mon, 6 Mar 2006 23:32:07 +0000 (00:32 +0100)]
Add support for TQM8260-AI boards.
Wolfgang Denk [Mon, 6 Mar 2006 23:22:36 +0000 (00:22 +0100)]
Cleanup (get rid of debug code that sneaked in)
Wolfgang Denk [Mon, 6 Mar 2006 22:18:48 +0000 (23:18 +0100)]
Merge with /home/wd/git/u-boot/master
Code cleanup.
Markus Klotzbücher [Mon, 6 Mar 2006 17:47:44 +0000 (18:47 +0100)]
Turned on SDRAM scrubbing.
Markus Klotzbücher [Mon, 6 Mar 2006 14:04:25 +0000 (15:04 +0100)]
Cleanup of NAND support of delta board using the Monahans Data Flash
Controller.
Markus Klotzbücher [Mon, 6 Mar 2006 12:45:42 +0000 (13:45 +0100)]
NAND finally working. Two bugs fixed:
* For READ_STATUS and READID commands always 8 bytes need to be read from
NDDB. Otherwise they stay there and get send to flash as the first data
word when writing.
* In nand_base.c the oob variable is not reset so this->oob_buf is
overwritten what eventually screws up the bad block descriptor table.
Wolfgang Denk [Mon, 6 Mar 2006 12:03:37 +0000 (13:03 +0100)]
Minor code cleanup
Wolfgang Denk [Mon, 6 Mar 2006 10:25:22 +0000 (11:25 +0100)]
Merge the new NAND code (testing-NAND brach); see doc/README.nand
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005
[Merge with /home/tur/nand/u-boot]
Bartlomiej Sieka [Sun, 5 Mar 2006 17:57:33 +0000 (18:57 +0100)]
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
Markus Klotzbücher [Sat, 4 Mar 2006 17:35:51 +0000 (18:35 +0100)]
Lots of new stuff:
* Debug message can be turned on and off.
* Waiting for events now times out.
* Implemented RESET command.
* Added appropriate nand_bbt_descriptor and nand_oobinfo.
Remaining Problems:
* Read Status still behaves weird an returns invalid stuff sometimes.
* ECC Placement does not respect our scheme in nand_oobinfo.
Stefan Roese [Sat, 4 Mar 2006 13:57:03 +0000 (14:57 +0100)]
Add lowboot target to mcc200 board
Patch by Stefan Roese, 4 Mar 2006
Markus Klotzbücher [Fri, 3 Mar 2006 19:13:43 +0000 (20:13 +0100)]
Erasing works too now. The CS don't care causes problem with READSTATUS,
don't ask me why. There are still bugs in the bad block logic.
Markus Klotzbücher [Fri, 3 Mar 2006 15:09:28 +0000 (16:09 +0100)]
Write operation is working. Turned out that the READSTATUS hack was wrong
after all.
Markus Klotzbücher [Fri, 3 Mar 2006 14:37:01 +0000 (15:37 +0100)]
Writing is working, but there's still a bug that causes the data written to
start at an offset of 4 bytes from the start of the page.
Markus Klotzbücher [Fri, 3 Mar 2006 11:11:11 +0000 (12:11 +0100)]
Implemented writing, not working yet.
Markus Klotzbücher [Thu, 2 Mar 2006 13:02:36 +0000 (14:02 +0100)]
Moved the waiting loop for "Read Data Request" RDDREQ into the
delta_cmdfunc function, because this bit is only set once after a command
is sent and this allows read functions to be called multiple times.
Wolfgang Denk [Thu, 2 Mar 2006 11:30:17 +0000 (12:30 +0100)]
Merge with /home/sr/git/u-boot/cfi-flash-fix
Markus Klotzbücher [Thu, 2 Mar 2006 11:10:01 +0000 (12:10 +0100)]
Read bug fixed. Now "nand bad" list the badblocks correctly (i hope, since
there are 0)
Wolfgang Denk [Thu, 2 Mar 2006 10:03:05 +0000 (11:03 +0100)]
Make CFG_NO_FLASH work on ARM systems
Patch by Markus Klotzbuecher, 27 Feb 2006
Markus Klotzbücher [Wed, 1 Mar 2006 22:33:27 +0000 (23:33 +0100)]
Further NAND stuff implemented. Basic read commands seem to work.
Stefan Roese [Wed, 1 Mar 2006 16:00:49 +0000 (17:00 +0100)]
Fix problem with flash_get_size() from CFI driver update
Patch by Stefan Roese, 1 Mar 2006
Markus Klotzbücher [Tue, 28 Feb 2006 22:11:07 +0000 (23:11 +0100)]
All subsystem clocks not immediately need are turned at reset.
Markus Klotzbücher [Tue, 28 Feb 2006 21:51:01 +0000 (22:51 +0100)]
Added GPIO initialization of DF signal. Still not working.
Wolfgang Denk [Tue, 28 Feb 2006 17:39:20 +0000 (18:39 +0100)]
Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
use hush shell.
Markus Klotzbücher [Tue, 28 Feb 2006 17:05:25 +0000 (18:05 +0100)]
First steps implementing NAND support. Not working, fails to read ID.
Wolfgang Denk [Tue, 28 Feb 2006 15:42:50 +0000 (16:42 +0100)]
Merge ... Stefan Roese's branch with CFI driver fixes
Wolfgang Denk [Tue, 28 Feb 2006 15:39:47 +0000 (16:39 +0100)]
Merge with /home/wd/git/u-boot/master