rtl8192e: r8192_priv: Replace semaphore wx_sem with mutex

The semaphore 'wx_sem' in the r8192_priv is a simple mutex,
so it should be written as one. Semaphores are going away in the future.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8192e: rtllib_device: Replace semaphore wx_sem with mutex

The semaphore 'wx_sem' in the rtllib_device is a simple mutex,
so it should be written as one. Semaphores are going away in the future.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192e: avoid comparing unsigned type >= 0

There is one remaining warning about a type limit check in rtl8192e:

staging/rtl8192e/rtl819x_TSProc.c:326:14: error: comparison is always true due to limited range of data type [-Werror=type-limits]

This changes a macro into a local function to clarify the types and simplify
the check while removing the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192e: use s8 instead of char

Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of
incorrect code that results from 'char' being unsigned here, e.g.

staging/rtl8192e/rtl8192e/r8192E_phy.c:1072:36: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/r8192E_phy.c:1104:36: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/rtl_core.c:1987:16: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/rtl_dm.c:782:37: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtllib_softmac_wx.c:465:16: error: comparison is always false due to limited range of data type [-Werror=type-limits]

This patch changes all uses of 'char' in this driver that refer to
8-bit integers to use 's8' instead, which is signed on all architectures.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: use s8 instead of char

Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of
incorrect code that results from 'char' being unsigned here, e.g.

staging/rtl8192u/r8192U_core.c:4150:16: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192u/r8192U_dm.c:646:50: error: comparison is always false due to limited range of data type [-Werror=type-limits]

This patch changes all uses of 'char' in this driver that refer to
8-bit integers to use 's8' instead, which is signed on all architectures.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove _EFUSE_DEF_TYPE enum

This enumeration does not used.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove EFUSE_GetEfuseDefinition function

This function does not used.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: replace EFUSE_GetEfuseDefinition(..., TYPE_AVAILABLE_EFUSE_BYTES_BANK, &a) call with a = (EFUSE_REAL_CONTENT_LEN_88E - EFUSE_OOB_PROTECT_BYTES_88E)

This makes the code easier to read.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: replace EFUSE_GetEfuseDefinition(..., TYPE_EFUSE_MAX_SECTION, &a) with a = EFUSE_MAX_SECTION_88E

This makes the code easier to read.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove efuse_max variable in hal_EfusePartialWriteCheck

This variable does not used after assigning value.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: replace EFUSE_GetEfuseDefinition(..., TYPE_EFUSE_MAP_LEN, ...) call with it's result (EFUSE_MAP_LEN_88E)

This makes the code easier to read.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu: Remove unused semaphores

The semaphores xmit_sema, terminate_xmitthread_sema and tx_retevt
have no users, hence remove all references to them.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu: pwrctrl_priv: Replace semaphore 'lock' with mutex

The semaphore 'lock' in pwrctrl_priv is a simple mutex, so it should
be written as one. Semaphores are going away in the future.
_enter_pwrlock was using down_interruptible(), so the lock could be broken
by sending a signal. This could be a bug, because nothing checks the return
code here. Hence, using mutex_lock instead of the interruptible version.
Also, remove the now unused wrappers _init_pwrlock, _enter_pwrlock,
_exit_pwrlock and _rtw_down_sema.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu: Replace semaphore terminate_cmdthread_sema with completion

The semaphore 'terminate_cmdthread_sema' is used as completion,
so convert it to struct completion.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu: Replace semaphore cmd_queue_sema with completion

The semaphore 'cmd_queue_sema' is used as completion,
so convert it to struct completion.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: don't print skb->dev->name if skb is null

A null pointer dereference will occur when skb is null and
skb->dev->name is printed.  Replace the skb->dev->name with
plain text "ks_wlan" to fix this.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: declare private functions static

Private functions in ks_hostif.c can be declared static.

Fixes: 13a9930d15b4 ("staging: ks7010: add driver from Nanonote extra-repository")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: fix wait_for_completion_interruptible_timeout return handling

wait_for_completion_interruptible_timeout return 0 on timeout and
-ERESTARTSYS if interrupted. The check for
!wait_for_completion_interruptible_timeout() would report an interrupt
as timeout. Further, while HZ/50 will work most of the time it could
fail for HZ < 50, so this is switched to msecs_to_jiffies(20).

Fixes: 13a9930d15b4 ("staging: ks7010: add driver from Nanonote extra-repository")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: power.c: Fix checkpatch warning

Fix checkpatch.pl warning for trailing */ on a separate line
Remove '+' postfix and '-' prefix from the start and end of block comments

Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Fix checkpatch warning

Fix warning by checkpatch.pl
Add * for block comments on subsequent lines

Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: channel.c: Fix block comments usage warning by checkpatch.pl

This patch fixes the following checkpatch.pl warnings:

WARNING: Block comments use * on subsequent lines
+ /* TX_PE will reserve 3 us for MAX2829 A mode only,
+    it is for better TX throughput */

WARNING: Block comments use a trailing */ on a separate line
+    it is for better TX throughput */

Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:dpc.h:fix parantheses alignment

The following patch fixes "Alignment should match open parantheses"
check thrown by checkpatch.pl

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:dpc.c:Fix spaces

The following patch fixes two checks thrown by checkpatch.pl, "Spaces
preferred around '+'" and "No space is necessary after a cast"

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:dpc.c:Fix parantheses alignment

This patch fixes "Alignment should match open parantheses" check
thrown by checkpatch.pl

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:baseband.h: Fix alignment issue

Fix "Alignment should match open paranthesis" check thrown by
checkpatch.pl

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:card.c: fix camel case issue

Fix "Avoid camel case" issue thrown by checkpatch.pl

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:card.c: fix blank line issue

Fix "Please use a blank line after function declaration" check thrown
by checkpatch.pl

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:card.c: fix blank lines issue

Fix "Blank lines aren't necessary after an open brace" check thrown by
checkpatch.pl

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:card.c:fix alignment checks

Fix "Alignment should match with open paranthesis" check thrown by
checkpatch.pl

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:card.c:Fix comment block issue

Fix "Block comments use * on subsequent lines" and "Block comments use
*/ on trailing lines" warnings thrown by checkpatch.pl

Signed-off-by: Rithvik Patibandla <rithvikp98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Fix block comment style

This patch fixes the checkpatch.pl warning:

WARNING: Block comments use * on subsequent lines

Signed-off-by: Edward Lipinsky <ellipinsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sm750fb/sm750_hw.c: split assignment & long lines

Split lines over 80 characters and separated assignments.

Signed-off-by: Stefan Wolz <wolzstefan@web.de>
Signed-off-by: Christian Halder <christian.halder@fau.de>
Signed-off-by: Sebastian Handwerker <sebastian.handwerker@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sm750fb/sm750_hw.c: fixed comments

Fixed multiline comments to meet style standards,
fixed typos and split comment lines over 80 characters.

Signed-off-by: Stefan Wolz <wolzstefan@web.de>
Signed-off-by: Christian Halder <christian.halder@fau.de>
Signed-off-by: Sebastian Handwerker <sebastian.handwerker@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sm750fb/sm750_hw.c: fixed whitespacing

Deleted unnecessary newlines and added whitespaces around operators.

Signed-off-by: Stefan Wolz <wolzstefan@web.de>
Signed-off-by: Christian Halder <christian.halder@fau.de>
Signed-off-by: Sebastian Handwerker <sebastian.handwerker@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sm750fb/sm750_hw.c: corrected alignment

Fixed alignment in multiline declarations.

Signed-off-by: Stefan Wolz <wolzstefan@web.de>
Signed-off-by: Christian Halder <christian.halder@fau.de>
Signed-off-by: Sebastian Handwerker <sebastian.handwerker@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix block comments errors in ddk750_display.c

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: yeongjun Kim <iam.yeongjunkim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: fix block comment coding style issue in ddk750_chip.c

This is a patch to the ddk750_chip.c file that fixes up two block
comment coding style warnings found by the checkpatch.pl tool

Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: fix line length coding style issue in ddk750_chip.c

This is a patch to the ddk750_chip.c file that fixes up a line length
warning found by the checkpatch.pl tool

Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: fix a line length coding style warning in ddk750_chip.c

This is a patch to the ddk750_chip.c file that fixes up a
line length warning found by the checkpatch.pl tool.

Signed-off-by: Moshe Green <paledirac@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: gdm724x: gdm_tty: Fixed a checkpatch check issue.

Removed a blankline after an opening bracket.

Signed-off-by: Samuele Baisi <ciccio87@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Replace semaphore netlink with mutex

Replace semaphore netlink_mutex with mutex. Semaphores are
going away in the future.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: gdm_usb: Remove ignored value

The value assigned to ret will be overwritten before it could be read in a
future iteration of the loop. Removing the unnecessary assignment.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: octeon: use phy_ethtool_{get|set}_link_ksettings

There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.

There was a check on CAP_NET_ADMIN in cvm_oct_set_settings, but this
check is already done in dev_ethtool, so no need to repeat it before
calling the generic function.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: octeon: use phydev from struct net_device

The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: delete redundant log message

There will be a separate banner message after pow0 is set up (or an
error message if it failed).

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: check for pow0 before calling interface helper

Check for pow0 port first before calling the interface helper. This
avoids the following error log when setting up pow0 interface:

cvmx_helper_get_interface_num: Illegal IPD port number

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: validate interface before calling INDEX

Some helper functions call INDEX before checking if the interface is
valid. Since pow0 is not a real interface, we get the following errors:

cvmx_helper_get_interface_index_num: Illegal IPD port number

Fix by using INDEX only when needed with real interfaces.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: simplify struct for statistics

Merge several structures for statistics to one structure and remove
unnecessary union nesting.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: improve implementation concerning the shared memory

Remove the volatile specifiers of struct slic_shmem. Furthermore store the
bus addresses for the isr pointer, link status and statistics separately
and access the upper and lower word of these addresses by means of
[lower|upper]_32_bits(). By doing this take the endianness into account.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: dont use a structure but offsets for register accesses

Use the new register accessors that use offsets instead of the slic_regs
structure to read/write registers. Since not longer needed remove the
structure completley.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: avoid PCI write posting

Introduce the function slic_flush_write() which reads from the HOSTID
register and can be used to avoid PCI write posting. Use the function at
several critical places in the code.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: introduce register accessors that use register offsets

Introduce accessor functions that read and write registers by using a
register offset.
This is in preparation to replace the register addressing by means of the
slic_regs struct with an addressing by means of offsets.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: start tx queue when interface is brought up

There is no reason to delay tx queue activation until a link is detected.
So start the queue when the interface is brought up and stop it when the
interface is brought down.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: ensure mapping of io-memory is uncached

Writes to registers should be done uncached for various reasons. Ensure
this by replacing ioremap() with ioremap_nocache().

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: notifiy network stack about change in link state

Notify the network stack about link states via netif_carrier_[off|on]().
Also set the link state off initially and when the interface is brought
down.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: handle allocation failure in slic_init_adapter

The memory allocation in slic_init_adapter() can fail. Return an error in
this case and unwind properly. Also make sure that the allocated memory is
properly freed in case of an error in the calling probe() function.
By doing this also replace the alloc() followed by memset to zero the
memory with a zalloc() version.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: fix 'line over 80 characters'

fix checkpatch.pl warning about 'line over 80 characters'.

Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: This patch fixes the checkpatch.pl warning

WARNING: Statements should start on a tabstop

Signed-off-by: Prit Raj <prit.adra@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fixed unsigned type warnings

Replace unsigned by unsigned int in fbtft driver.  Issue found by
checkpatch.

Signed-off-by: Ming Yang <minos.future@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: do not allocate huge txbuf

txbuflen can be set to arbitrary value by user and it is also set
automagically to the maximum transfer size of the SPI master controller.

Do not allocate the buffer when larger than vmem. When my SPI master
controller reports maximum transfer size 16M the probe of fbtft fails.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: remove __GFP_NOWARN when use low order gfp flags

It's useful to show the current memory in detail when alloc failed.

And, there may be a lot of high order alloc failed, just show memory
when an order 0 alloc failed.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ION: Sys_heap: Add cached pool to spead up cached buffer alloc

Add ion cached pool in system heap. This patch add a cached pool
in system heap. It has a great improvement of alloc for cached
buffer.

With memory pressue alloc test 800MB in userspace used iontest.
The result avg is 577ms. Without patch it's avg is about 883ms.

v1: Makes the cached buffer zeroed before going to pool
v2: Add cached param in pool to distinguish wheather need to flush
    cache at a fresh alloc.
    Rework the shrink function.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Xia Qing <saberlily.xia@hisilicon.com>
Reviewed-by: Fu Jun <oliver.fu@hisilicon.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: fix comparison to NULL issue.

This patch fixes comparison to NULL could be written "wlandev" found
by checkpatch.pl tool.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: fix unnecessary parentheses.

This patch fixes Unnecessary parentheses around interface->dev found
by checkpatch.pl tool.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: fix alignment not matching.

This patch fixes alignment should match open parenthesis found by
checkpatch.pl tool in prism2usb.c.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Fix trailing */ in block comments.

Fix checkpatch.pl warning:

WARNING: Block comments use a trailing */ on a separate line.

Signed-off-by: Bo Yu <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix error handling in wilc_debugfs_init()

We can just ignore the return value from debugfs_create_dir() and
debugfs_create_file(). The second one already interanlly checks the dentry
created by the first before creating the file.

debugfs was written so it would be easy to use, no need for error checking.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: wilc1000: remove references to semaphores

* Update the comments that refer to semaphores
* Remove redundant includes to semphore.h

Signed-off-by: Joshua Houghton <josh@awful.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: Reformat braces around else

As suggested by Documentation/CodingStyle move braces onto same line as else.

Signed-off-by: Anthony Sheldon <sheldon.anthony.sheldon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: icn: remove braces

Braces are not required in a single statement block.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: icn: donot assign in if statement

It is not the kernel coding style to make assignments in the if
statement and checkpatch was warning us about it.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: icn: do not use return as a function

return is not a function so no need to use the parenthesis.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: icn: use setup_timer() and mod_timer().

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: pcbit: layer2: use setup_timer() and mod_timer().

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: pcbit: edss1: use setup_timer() and mod_timer().

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: pcbit: drv: use setup_timer() and mod_timer().

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: s626: fix line over 80 characters issue

This fixes up a line over 80 characters issues found by
the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: replace le16_to_cpu() with usb_endpoint_maxp()

Use macro introduced in commit 939f325f4a0f
("usb: add usb_endpoint_maxp() macro")

Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi/drivers: Fixed sparse warnings

Fixed below sparse warnings in dt2811.c
 warning: symbol 'dt2811_clk_dividers' was not declared. Should it be static?
 warning: symbol 'dt2811_clk_multipliers' was not declared. Should it be static?

Signed-off-by: Nayeemahmed Badebade <itachi.opsrc@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcidio: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Move the configuration options comment into the comedi driver comment
block. That's were they typically are listed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_dio24: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_cs: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_670x: fix block comment issues

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08_cs: fix block comments

Fix the checkpatch.pl issue:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3501: add a comedi driver comment block

This comment block is used to automatically generate documentation in
Comedi and Comedilib.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3501: remove timer/counter subdevice support

This driver is for a simple 4/8 channel analog output board with 2 isolated
digital inputs and 2 isolated digital outputs. Support for these subdevices
is provided by the driver.

The boards also has a watchdog timer that can be used to reset the analog
outputs. It can also be used as a general purpose 12-bit timer when the
watchdog function is not necessary. The current support code for this
subdevice is broken. It does not follow the comedi API and requires some
out-of-tree patches in order to even work.

Remove the subdevice support. If a proper register map can be located for
this board we can add support back later.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: plx9080.h: rename some macros for consistency

Most of the macros in "plx9080.h" that define register values are
single-bits flags of the form `PLX_<REG>_<FLAG>`, or are constant,
multi-bit values of the form `PLX_<REG>_<FIELD>_<VAL>`, or are
non-constant, function-like macros of the form `PLX_<REG>_<FIELD>(x)`.
Some of the macros for constant, multi-bit values do not currently
fit the pattern, so rename them for consistency.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: plx9080.h: define PLX_<REG>_TO_<FIELD>(r) macros

Various macros in "plx9080.h" take the form `PLX_<REG>_<FIELD>(x)`,
where `<REG>` is a register name, `<FIELD>` is a field within the
register, and `x` is a value for the field specified by the caller.  The
macros construct a partial register register with the specified field
value placed in the appropriate bits of the register value, and other
bits of the register value zeroed.  Add corresponding macros of the form
`PLX_<REG>_TO_<FIELD>(r)` that extract a field value from a specified
register values.  Remove macros of the form `PLX_<REG>_<FIELD>_SHIFT`
that specified the bit position of a field within a register value as
they are no longer useful.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: add support for new USB gadget

This patch is needed to make the driver support Microchip's OS81210 USB
MOST network interface controller. It simply adds the gadget's product
ID to the driver's ID table.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: remove unnecessary status assignment

The USB completion callbacks set the status field of an MBO object before
scheduling the clear_work. This patch removes this redundant assignment as
the work_struct does the same for all MBOs.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: init variables at declaration time

This patch initializes variables by the time they are declared.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: remove redundant parenthesis

This patch removes unnecessary parenthesis in boolean expressions.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: remove completion object

Waiting for the urb_compl object to complete evaluates always as false.
This patch removes this unnecessary completion object.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: synchronize release of struct buf_anchor

In case a channel that is going to be destroyed has been tagged as not
"healthy" by the function hdm_poison_channel() while the functions
hdm_write_completion() or hdm_read_completion() are being executed, they
race for destruction of buf_anchor.

This patch fixes the problem.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: assign spinlock to local variable

This patch assigns the spinlock of struct mdev to local spinlock_t
variable to get rid of all the ugly dereferencing.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: fix race between enqueue and most_stop_enqueue

The "broken in pipe" handler of the USB-HDM calls most_stop_enqueue() to
stop the MBO traffic before returning all MBOs back to the Mostcore.  As
the enqueue() call from the Mostcore may run in parallel with the
most_stop_enqueue(), the HDM may run into the inconsistent state and
crash the kernel.

This patch synchronizes enqueue(), most_stop_enqueue() and
most_resume_enqueue() with a mutex, hence avoiding the race condition.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>