drm/i915/tgl: Add the Thunderbolt PLL divider values

The Thunderbolt PLL divider values on TGL differ from the ICL ones,
update the PLL parameter calculation function accordingly.

Bspec: 49204

v2:
- Remove unused refclk config. (José)

Cc: Jose Souza <jose.souza@intel.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jose Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002204108.32242-1-imre.deak@intel.com

drm/i915: use DRM_DEBUG_KMS() instead of drm_dbg(DRM_UT_KMS, ...)

Unify on current common usage to allow repurposing drm_dbg() later. Fix
newlines while at it.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002145405.27848-2-jani.nikula@intel.com

drm/i915: use DRM_ERROR() instead of drm_err()

Unify on current common usage to allow repurposing drm_err() later. Fix
newlines while at it.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002145405.27848-1-jani.nikula@intel.com

drm/i915/selftests: Exercise potential false lite-restore

If execlists's lite-restore is based on the common GEM context tag
rather than the per-intel_context LRCA, then a context switch between
two intel_contexts on the same engine derived from the same GEM context
will perform a lite-restore instead of a full context switch. We can
exploit this by poisoning the ringbuffer of the first context and trying
to trick a simple RING_TAIL update (i.e. lite-restore)

v2: Also check what happens if preempt ce[0] with ce[1] (both instances
on the same engine from the same parent context) [Tvrtko]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002183459.26614-1-chris@chris-wilson.co.uk

drm/i915/mg: Use tc_port instead of port parameter to MG registers

All the MG registers is based on the tc_port not port, so
MG_PHY_PORT_LN() was subtracting port and PORT_C what is very
fragile.
So replacing port to tc_port in all MG register macros and users
like we have for DKL.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001193729.123736-1-jose.souza@intel.com

drm/i915: Clean up encoder->crtc_mask setup

Use BIT(pipe) for better legibility when populating the crtc_mask
for encoders.

Also remove the redundant possible_crtcs setup for the TV encoder.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-11-ville.syrjala@linux.intel.com

drm/i915: Populate possible_crtcs correctly

Don't advertize non-exisiting crtcs in the encoder possible_crtcs
bitmask.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-9-ville.syrjala@linux.intel.com

drm/i915/gem: Refactor tests on obj->ops->flags

We repeat obj->ops->flags in our object checks, so pull that into its
own little helper for clarity.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002123014.1545-1-chris@chris-wilson.co.uk

drm/i915/selftests: Extract random_offset() for use with a prng

For selftests, we desire repeatability and so prefer using a prng with
known seed over true randomness. Extract random_offset() as a selftest
utility that can take the prng state.

Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002122430.23205-1-chris@chris-wilson.co.uk

drm/i915: Fix g4x sprite scaling stride check with GTT remapping

I forgot to update the g4x sprite scaling stride check when GTT
remapping was introduced. The stride of the original framebuffer
is irrelevant when remapping is used and instead we want to check
the stride of the remapped view.

Also drop the duplicate width_bytes check. We already check that
a few lines earlier.

Fixes: df79cf441910 ("drm/i915: Store the final plane stride in plane_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Polish intel_tv_mode_valid()

Drop the tv_mode NULL check since intel_tv_mode_find() never
actually returns NULL, and flip the condition around so that
the MODE_OK case is at the end, which is customary to all
the other .mode_valid() implementations.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Limit MST modes based on plane size too

When adding the max plane size checks to the .mode_valid() hooks
I naturally forgot about MST. Take care of that one as well.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 2d20411e25a3 ("drm/i915: Don't advertise modes that exceed the max plane size")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/display: abstract all vgaarb access to intel_vga.[ch]

Split out the code related to vga client and vgaarb all over the place
into new intel_vga.[ch]. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001152506.7854-1-jani.nikula@intel.com

drm/i915/userptr: Never allow userptr into the mappable GGTT

Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to
invalidate userptr objects which also happen to be pulled into GGTT
mmaps. That is when we unbind the userptr object (on mmu invalidation),
we revoke all CPU mmaps, which may then recurse into mmu invalidation.

We looked for ways of breaking the cycle, but the revocation on
invalidation is required and cannot be avoided. The only solution we
could see was to not allow such GGTT bindings of userptr objects in the
first place. In practice, no one really wants to use a GGTT mmapping of
a CPU pointer...

Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got
a genuine blip from CI:

<4>[  246.793958] ======================================================
<4>[  246.793972] WARNING: possible circular locking dependency detected
<4>[  246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G     U
<4>[  246.794003] ------------------------------------------------------
<4>[  246.794017] kswapd0/145 is trying to acquire lock:
<4>[  246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[  246.794250]
                  but task is already holding lock:
<4>[  246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0
<4>[  246.794291]
                  which lock already depends on the new lock.

<4>[  246.794307]
                  the existing dependency chain (in reverse order) is:
<4>[  246.794322]
                  -> #3 (&anon_vma->rwsem){++++}:
<4>[  246.794344]        down_write+0x33/0x70
<4>[  246.794357]        __vma_adjust+0x3d9/0x7b0
<4>[  246.794370]        __split_vma+0x16a/0x180
<4>[  246.794385]        mprotect_fixup+0x2a5/0x320
<4>[  246.794399]        do_mprotect_pkey+0x208/0x2e0
<4>[  246.794413]        __x64_sys_mprotect+0x16/0x20
<4>[  246.794429]        do_syscall_64+0x55/0x1c0
<4>[  246.794443]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794456]
                  -> #2 (&mapping->i_mmap_rwsem){++++}:
<4>[  246.794478]        down_write+0x33/0x70
<4>[  246.794493]        unmap_mapping_pages+0x48/0x130
<4>[  246.794519]        i915_vma_revoke_mmap+0x81/0x1b0 [i915]
<4>[  246.794519]        i915_vma_unbind+0x11d/0x4a0 [i915]
<4>[  246.794519]        i915_vma_destroy+0x31/0x300 [i915]
<4>[  246.794519]        __i915_gem_free_objects+0xb8/0x4b0 [i915]
<4>[  246.794519]        drm_file_free.part.0+0x1e6/0x290
<4>[  246.794519]        drm_release+0xa6/0xe0
<4>[  246.794519]        __fput+0xc2/0x250
<4>[  246.794519]        task_work_run+0x82/0xb0
<4>[  246.794519]        do_exit+0x35b/0xdb0
<4>[  246.794519]        do_group_exit+0x34/0xb0
<4>[  246.794519]        __x64_sys_exit_group+0xf/0x10
<4>[  246.794519]        do_syscall_64+0x55/0x1c0
<4>[  246.794519]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794519]
                  -> #1 (&vm->mutex){+.+.}:
<4>[  246.794519]        i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915]
<4>[  246.794519]        i915_address_space_init+0x9f/0x160 [i915]
<4>[  246.794519]        i915_ggtt_init_hw+0x55/0x170 [i915]
<4>[  246.794519]        i915_driver_probe+0xc9f/0x1620 [i915]
<4>[  246.794519]        i915_pci_probe+0x43/0x1b0 [i915]
<4>[  246.794519]        pci_device_probe+0x9e/0x120
<4>[  246.794519]        really_probe+0xea/0x3d0
<4>[  246.794519]        driver_probe_device+0x10b/0x120
<4>[  246.794519]        device_driver_attach+0x4a/0x50
<4>[  246.794519]        __driver_attach+0x97/0x130
<4>[  246.794519]        bus_for_each_dev+0x74/0xc0
<4>[  246.794519]        bus_add_driver+0x13f/0x210
<4>[  246.794519]        driver_register+0x56/0xe0
<4>[  246.794519]        do_one_initcall+0x58/0x300
<4>[  246.794519]        do_init_module+0x56/0x1f6
<4>[  246.794519]        load_module+0x25bd/0x2a40
<4>[  246.794519]        __se_sys_finit_module+0xd3/0xf0
<4>[  246.794519]        do_syscall_64+0x55/0x1c0
<4>[  246.794519]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794519]
                  -> #0 (&dev->struct_mutex/1){+.+.}:
<4>[  246.794519]        __lock_acquire+0x15d8/0x1e90
<4>[  246.794519]        lock_acquire+0xa6/0x1c0
<4>[  246.794519]        __mutex_lock+0x9d/0x9b0
<4>[  246.794519]        userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[  246.794519]        __mmu_notifier_invalidate_range_start+0x85/0x110
<4>[  246.794519]        try_to_unmap_one+0x76b/0x860
<4>[  246.794519]        rmap_walk_anon+0x104/0x280
<4>[  246.794519]        try_to_unmap+0xc0/0xf0
<4>[  246.794519]        shrink_page_list+0x561/0xc10
<4>[  246.794519]        shrink_inactive_list+0x220/0x440
<4>[  246.794519]        shrink_node_memcg+0x36e/0x740
<4>[  246.794519]        shrink_node+0xcb/0x490
<4>[  246.794519]        balance_pgdat+0x241/0x580
<4>[  246.794519]        kswapd+0x16c/0x530
<4>[  246.794519]        kthread+0x119/0x130
<4>[  246.794519]        ret_from_fork+0x24/0x50
<4>[  246.794519]
                  other info that might help us debug this:

<4>[  246.794519] Chain exists of:
                    &dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem

<4>[  246.794519]  Possible unsafe locking scenario:

<4>[  246.794519]        CPU0                    CPU1
<4>[  246.794519]        ----                    ----
<4>[  246.794519]   lock(&anon_vma->rwsem);
<4>[  246.794519]                                lock(&mapping->i_mmap_rwsem);
<4>[  246.794519]                                lock(&anon_vma->rwsem);
<4>[  246.794519]   lock(&dev->struct_mutex/1);
<4>[  246.794519]
                   *** DEADLOCK ***

v2: Say no to mmap_ioctl

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190928082546.3473-1-chris@chris-wilson.co.uk

drm/i915/dp: Fix DP MST error after unplugging TypeC cable

This patch avoids DP MST payload error message in dmesg, as it is trying
to update the payload to the disconnected DP MST device. After DP MST
device is disconnected we should not be updating the payload and
hence remove the error.

v2: Removed the connector status check and converted from error to debug.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Signed-off-by: Srinivasan S <srinivasan.s@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569371742-109402-1-git-send-email-srinivasan.s@intel.com

drm/i915: Initialise breadcrumb lists on the virtual engine

With deferring the breadcrumb signalling to the virtual engine (thanks
preempt-to-busy) we need to make sure the lists and irq-worker are ready
to send a signal.

[41958.710544] BUG: kernel NULL pointer dereference, address: 0000000000000000
[41958.710553] #PF: supervisor write access in kernel mode
[41958.710556] #PF: error_code(0x0002) - not-present page
[41958.710558] PGD 0 P4D 0
[41958.710562] Oops: 0002 [#1] SMP
[41958.710565] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G     U            5.3.0+ #207
[41958.710568] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[41958.710602] RIP: 0010:i915_request_enable_breadcrumb+0xe1/0x130 [i915]
[41958.710605] Code: 8b 44 24 30 48 89 41 08 48 89 08 48 8b 85 98 01 00 00 48 8d 8d 90 01 00 00 48 89 95 98 01 00 00 49 89 4c 24 28 49 89 44 24 30 <48> 89 10 f0 80 4b 30 10 c6 85 88 01 00 00 00 e9 1a ff ff ff 48 83
[41958.710609] RSP: 0018:ffffc90000003de0 EFLAGS: 00010046
[41958.710612] RAX: 0000000000000000 RBX: ffff888735424480 RCX: ffff8887cddb2190
[41958.710614] RDX: ffff8887cddb3570 RSI: ffff888850362190 RDI: ffff8887cddb2188
[41958.710617] RBP: ffff8887cddb2000 R08: ffff8888503624a8 R09: 0000000000000100
[41958.710619] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8887cddb3548
[41958.710622] R13: 0000000000000000 R14: 0000000000000046 R15: ffff888850362070
[41958.710625] FS:  0000000000000000(0000) GS:ffff88885ea00000(0000) knlGS:0000000000000000
[41958.710628] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[41958.710630] CR2: 0000000000000000 CR3: 0000000002c09002 CR4: 00000000001606f0
[41958.710633] Call Trace:
[41958.710636]  <IRQ>
[41958.710668]  __i915_request_submit+0x12b/0x160 [i915]
[41958.710693]  virtual_submit_request+0x67/0x120 [i915]
[41958.710720]  __unwind_incomplete_requests+0x131/0x170 [i915]
[41958.710744]  execlists_dequeue+0xb40/0xe00 [i915]
[41958.710771]  execlists_submission_tasklet+0x10f/0x150 [i915]
[41958.710776]  tasklet_action_common.isra.17+0x41/0xa0
[41958.710781]  __do_softirq+0xc8/0x221
[41958.710785]  irq_exit+0xa6/0xb0
[41958.710788]  smp_apic_timer_interrupt+0x4d/0x80
[41958.710791]  apic_timer_interrupt+0xf/0x20
[41958.710794]  </IRQ>

Fixes: cb2377a919bb ("drm/i915: Fixup preempt-to-busy vs reset of a virtual request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001103518.9113-1-chris@chris-wilson.co.uk

drm/i915/gt: Only unwedge if we can reset first

Unwedging the GPU requires a successful GPU reset before we restore the
default submission, or else we may see residual context switch events
that we were not expecting.

v2: Pull in the special-case reset_clobbers_display, and explain why it
should be safe in the context of unwedging.

v3: Just forget all about resets before unwedging if it will clobber the
display; risk it all.

Reported-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190927160335.10622-1-chris@chris-wilson.co.uk

drm/i915/selftests: Exercise context switching in parallel

We currently test context switching on each engine as a basic stress
test (just verifying that nothing explodes if we execute 2 requests from
different contexts sequentially). What we have not tested is what
happens if we try and do so on all available engines simultaneously,
putting our SW and the HW under the maximal stress.

v2: Clone the set of engines from the first context into the secondary
contexts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930144919.27992-1-chris@chris-wilson.co.uk

drm/i915/selftests: Provide a mock GPU reset routine

For those mock tests that may wish to pretend triggering a GPU reset and
processing the cleanup.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-3-chris@chris-wilson.co.uk

drm/i915/selftests: Distinguish mock device from no wakeref

On systems that have no runtime-pm, we mark the wakeref as being -1. We
therefore cannot use that value for the mock-gt indicator, so opt for
-ENODEV instead. The wakeref should never be an error value -- one
hopes!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-2-chris@chris-wilson.co.uk

drm/i915: Pass intel_gt to has-reset?

As we execute GPU resets on a gt/ basis, and use the intel_gt as the
primary for all other reset functions, also use it for the has-reset?
predicates. Gradually simplifying the churn of pointers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-1-chris@chris-wilson.co.uk

drm/i915/selftests: Do not try to sanitize mock HW

If we are mocking the device, skip trying to sanitize the pm HW state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927210646.29664-1-chris@chris-wilson.co.uk

drm/i915: simplify i915_gem_init_early

i915_gem_init_early doesn't need to return anything.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927173409.31175-3-matthew.auld@intel.com

drm/i915: check for kernel_context

Explosions during early driver init on the error path. Make sure we fail
gracefully.

[ 9547.672258] BUG: kernel NULL pointer dereference, address: 000000000000007c
[ 9547.672288] #PF: supervisor read access in kernel mode
[ 9547.672292] #PF: error_code(0x0000) - not-present page
[ 9547.672296] PGD 8000000846b41067 P4D 8000000846b41067 PUD 797034067 PMD 0
[ 9547.672303] Oops: 0000 [#1] SMP PTI
[ 9547.672307] CPU: 1 PID: 25634 Comm: i915_selftest Tainted: G     U            5.3.0-rc8+ #73
[ 9547.672313] Hardware name:  /NUC6i7KYB, BIOS KYSKLi70.86A.0050.2017.0831.1924 08/31/2017
[ 9547.672395] RIP: 0010:intel_context_unpin+0x9/0x100 [i915]
[ 9547.672400] Code: 6b 60 00 e9 17 ff ff ff bd fc ff ff ff e9 7c ff ff ff 66 66 2e 0f 1f 84 00 00 00 00
 00 0f 1f 40 00 0f 1f 44 00 00 41 54 55 53 <8b> 47 7c 83 f8 01 74 26 8d 48 ff f0 0f b1 4f 7c 48 8d 57 7c
 75 05
[ 9547.672413] RSP: 0018:ffffae8ac24ff878 EFLAGS: 00010246
[ 9547.672417] RAX: ffff944a1b7842d0 RBX: ffff944a1b784000 RCX: ffff944a12dd6fa8
[ 9547.672422] RDX: ffff944a1b7842c0 RSI: ffff944a12dd5328 RDI: 0000000000000000
[ 9547.672428] RBP: 0000000000000000 R08: ffff944a11e5d840 R09: 0000000000000000
[ 9547.672433] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 9547.672438] R13: ffffffffc11aaf00 R14: 00000000ffffffe4 R15: ffff944a0e29bf38
[ 9547.672443] FS:  00007fc259b88ac0(0000) GS:ffff944a1f880000(0000) knlGS:0000000000000000
[ 9547.672449] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9547.672454] CR2: 000000000000007c CR3: 0000000853346003 CR4: 00000000003606e0
[ 9547.672459] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9547.672464] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9547.672469] Call Trace:
[ 9547.672518]  intel_engine_cleanup_common+0xe3/0x270 [i915]
[ 9547.672567]  execlists_destroy+0xe/0x30 [i915]
[ 9547.672669]  intel_engines_init+0x94/0xf0 [i915]
[ 9547.672749]  i915_gem_init+0x191/0x950 [i915]

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927173409.31175-2-matthew.auld@intel.com

drm/i915/tgl: initialize TC and TBT ports

Now that TC support was added, initialize DDIs.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-4-jose.souza@intel.com

drm/i915/tgl: Fix dkl link training

Link training is failling when running link at 2.7GHz and 1.62GHz and
following BSpec pll algorithm.

Comparing the values calculated and the ones from the reference table
it looks like MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO should not always set
to 5. For DP ports ICL mg pll algorithm sets it to 10 or 5 based on
div2 value, that matches with dkl hardcoded table.

So implementing this way as it proved to work in HW and leaving a
comment so we know why it do not match BSpec.

v4:
Using the same is_dp check as ICL, need testing on HDMI over tc port

Issue reported on BSpec 49204.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-3-jose.souza@intel.com

drm/i915/tgl: Add dkl phy programming sequences

Added DKL Phy sequences and helpers functions to program voltage
swing, clock gating and dp mode.

It is not written in DP enabling sequence but "PHY Clockgating
programming" states that clock gating should be enabled after the
link training but doing so causes all the following trainings to fail
so not enabling it for.

v2:
Setting the right HIP_INDEX_REG bits (José)

v3:
Adding the meaning of each column of tgl_dkl_phy_ddi_translations
Adding if gen >= 12 on intel_ddi_hdmi_level() and
intel_ddi_pre_enable_hdmi() instead of reuse part of gen >= 11 if

v4:
Moved the DP_MODE lane programing to another patch as ICL also
needed it
Sharing icl_phy_set_clock_gating() and icl_program_mg_dp_mode() with
TGL as bits and programing as now it almost identical to ICL

BSpec: 49292
BSpec: 49190

Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-2-jose.souza@intel.com

drm/i915/tc: Update DP_MODE programming

BSpec was updated(r146548) with a new MG_DP_MODE Programming table,
now taking in consideration the pin assignment and allowing us to
optimize power by shutting down available but not needed lanes.

It was tested on ICL and TGL, with adaptors that used pin assignment
C and B, reversing the connector and going to different modes testing
the not needed lane shutdown.

v5:
Using crtc_state->lane_count instead of dp.lane_count

BSpec: 21735
BSpec: 49292

Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-1-jose.souza@intel.com

drm/i915/dmc: Update ICL DMC version to v1.09

We have a new version of DMC for ICL - v1.09.

This version adds the Half Refresh Rate capability
into DMC.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925201250.18136-1-daniele.ceraolospurio@intel.com

drm/i915/huc: fix version parsing from CSS header

The HuC FW has silently switched to encoding the version the same way as
the GuC FW does, i.e. major.minor.patch instead of just major.minor. All
the current blobs follow the new scheme, but since minor and patch are
both zero there is no difference in the end results and we happily load
them. New binaries, however, will have non-zero values in there, so we
need to make sure to parse them correctly.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925222121.4000-1-daniele.ceraolospurio@intel.com

drm/i915: Update DRIVER_DATE to 20190927

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Extract GT render sleep (rc6) management

Continuing the theme of breaking intel_pm.c up in a reasonable chunk of
powermanagement utilities, pull out the rc6 setup into its GT handler.

Based on a patch by Chris Wilson.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919143840.20384-1-andi.shyti@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190927110849.28734-1-chris@chris-wilson.co.uk

drm/i915/selftests: Exercise concurrent submission to all engines

The simplest and most maximal submission we can do, a thread to submit
requests unto each engine.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925193446.26007-1-chris@chris-wilson.co.uk

drm/i915: Add definitions for MI_MATH command

We can use it in i915 for updating parts of unmasked registers from
within a batch. We're also adding Gen8+ versions of CS_GPR registers
(aka MI_MATH_REG in the coprocessor).

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926100635.9416-4-michal.winiarski@intel.com

drm/i915/perf: Fix use of kernel-doc format in structure members

Insert structure members names into their descriptions to follow
kernel-doc format.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926122158.13028-1-anna.karas@intel.com

drm/i915: Don't disable interrupts for intel_engine_breadcrumbs_irq()

The function intel_engine_breadcrumbs_irq() is always invoked from an interrupt
handler and for that reason it invokes (as an optimisation) only spin_lock()
for locking assuming that the interrupts are already disabled. The
function intel_engine_signal_breadcrumbs() is provided to disable
interrupts while the former function is invoked so that assumption is
also true for callers from preemptible context.

On PREEMPT_RT local_irq_disable() really disables interrupts and this
forbids to invoke spin_lock() which becomes a sleeping spinlock.

This is also problematic with `threadirqs' in conjunction with
irq_work. With force threading the interrupt handler, the handler is
invoked with disabled BH but with interrupts enabled. This is okay and
the lock itself is never acquired in IRQ context. This changes with
irq_work (signal_irq_work()) which _still_ invokes
intel_engine_breadcrumbs_irq() from IRQ context. Lockdep should see this
and complain.

Acquire the locks in intel_engine_breadcrumbs_irq() with _irqsave()
suffix and let all callers invoke intel_engine_breadcrumbs_irq()
directly instead using intel_engine_signal_breadcrumbs().

Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926105644.16703-2-bigeasy@linutronix.de

drm/i915: Drop the IRQ-off asserts

The lockdep_assert_irqs_disabled() check is needless. The previous
lockdep_assert_held() check ensures that the lock is acquired and while
the lock is acquired lockdep also prints a warning if the interrupts are
not disabled if they have to be.
These IRQ-off asserts trigger on PREEMPT_RT because the locks become
sleeping locks and do not really disable interrupts.

Remove lockdep_assert_irqs_disabled().

Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926105644.16703-3-bigeasy@linutronix.de

drm/i915: Adjust length of MI_LOAD_REGISTER_REG

Default length value of MI_LOAD_REGISTER_REG is 1.
Also move it out of cmd-parser-only registers since we're going to use
it in i915.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926133142.2838-3-chris@chris-wilson.co.uk

drm/i915/execlists: Use per-process HWSP as scratch

Some of our commands (MI_FLUSH_DW / PIPE_CONTROL) require a post-sync write
operation to be performed. Currently we're using dedicated VMA for
PIPE_CONTROL and global HWSP for MI_FLUSH_DW.
On execlists platforms, each of our contexts has an area that can be
used as scratch space. Let's use that instead.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926133142.2838-2-chris@chris-wilson.co.uk

drm/i915: Define explicit wedged on init reset state

We're currently using scratch presence as a way of identifying that we
entered wedged state at driver initialization time.
Let's use a separate flag rather than rely on scratch.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926133142.2838-1-chris@chris-wilson.co.uk

drm/i915: Small joiner RAM buffer size is platform-specific

According to the bspec, GLK/CNL have a smaller small joiner RAM buffer
than ICL+.  This feels like something that could easily change again on
future platforms, so let's just add a function to return the proper
per-platform buffer size.  That may also slightly simplify the upcoming
bigjoiner enabling.

Since we have to change intel_dp_dsc_get_output_bpp()'s signature to
pass the dev_priv down for the platform check, let's take the
opportunity to also make that function static since it isn't used
outside the intel_dp file.

v2: Minor rebase on top of Maarten's changes.

Bspec: 20388
Bspec: 49259
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925234542.24289-1-matthew.d.roper@intel.com

drm/i915/tgl: Add memory type decoding for bandwidth checking

The memory type values have changed in TGL, so we need to translate them
differently than ICL. While we're moving it, fix up the ICL translation
for LPDDR4.

BSpec: 53998

v2: Fix up ICL LPDDR4 entry (Ville); Drop unused values from TGL (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924222829.13142-1-james.ausmus@intel.com

drm/i915/tgl: Return the mg/dkl pll as DDI clock for new TC ports

TGL added 2 more TC ports that currently are not being handled by
icl_pll_to_ddi_clk_sel(), so adding those.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-6-jose.souza@intel.com

drm/i915/tgl: Add dkl phy pll calculations

Extending ICL mg calculations to also support dkl calculations.

v3:
Fixing iref_trim calculation for 38400 refclock

BSpec: 49204

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-5-jose.souza@intel.com

drm/i915/tgl: re-indent code to prepare for DKL changes

The final save operation into pll_state of the calculations done will
be different for DKL PHY. Prepare for that by reindenting code so it's
easier to check for correctness. This one has no change in behavior.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-4-jose.souza@intel.com

drm/i915/tgl: Add support for dkl pll write

Add a new function to write to dkl phy pll registers. As per the
bspec all the registers are read modify write.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-2-jose.souza@intel.com

drm/i915/tgl: Add initial dkl pll support

The disable function can be the same as for MG phy since the same
registers are used. The others are different as registers changed,
also adding a empty dkl_pll_write() to be implemented later.

v2:
Setting the right HIP_INDEX_REG bits (José)

v3:
Masking non-computed registers of mg_pll_tdc_coldst_bias
when getting hardware state
Sharing mg_pll_enable() with TGL

Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924210040.142075-1-jose.souza@intel.com

drm/i915/execlists: Simplify gen12_csb_parse

Having decided that we only care about the promotion predicate, we can
simplify gen12_csb_parse to simply check whether we need to jump to a
new queue.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925130845.17952-1-chris@chris-wilson.co.uk

drm/i915: Do not add all planes when checking scalers on glk+

We cannot switch between HQ and normal mode on GLK+, so only
add planes on platforms where it makes sense.

We could probably restrict it even more to only add when scaler
users toggles between 1 and 2, but lets just leave it for now.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920114235.22411-9-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915: Rename planar linked plane variables

Rename linked_plane to planar_linked_plane and slave to planar_slave,
this will make it easier to keep apart bigjoiner linking and planar plane
linking.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920114235.22411-8-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915: Get rid of crtc_state->fb_changed

We had this as an optimization to not do a plane update, but we killed
it off because there are so many reasons we may have to do a plane
update or fastset that it's best to just assume everything changed.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920114235.22411-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915: Add hardware readout for FEC

Readout the FEC state in encoder->get_config(), this will allow
us to ensure that we can correctly inherit the state from boot,
and that we set FEC during modeset.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/dp: Fix dsc bpp calculations, v5.

There was a integer wraparound when mode_clock became too high,
and we didn't correct for the FEC overhead factor when dividing,
with the calculations breaking at HBR3.

As a result our calculated bpp was way too high, and the link width
limitation never came into effect.

Print out the resulting bpp calcululations as a sanity check, just
in case we ever have to debug it later on again.

We also used the wrong factor for FEC. While bspec mentions 2.4%,
all the calculations use 1/0.972261, and the same ratio should be
applied to data M/N as well, so use it there when FEC is enabled.

This fixes the FIFO underrun we are seeing with FEC enabled.

Changes since v2:
- Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogus fec_to_mode_clock. (Ville)
Changes since v4:
- Use the correct register for icl. (Ville)
- Split hw readout to a separate patch.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: <stable@vger.kernel.org> # v5.0+
Cc: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Revert "drm/i915/color: Extract icl_read_luts()"

This reverts commit 84af7649188194a74cdd6437235a5e3c86108f0f.

This is causing problems with the display, displays are all
bright colors.

Fixes: 84af76491881 ("drm/i915/color: Extract icl_read_luts()")
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924135820.11850-1-swati2.sharma@intel.com

drm/i915/tgl: Swap engines for no rps (gpu reclocking)

If we disable rps, it appears the Tigerlake is stable enough to run
multiple engines simultaneously in CI. As disabling rps should only
cause the execution to be slow, whereas many features depend on the
different engines, we would prefer to have the engines enabled while the
machine hangs are being debugged.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111714
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924173501.21956-1-chris@chris-wilson.co.uk

drm/i915: Add Pipe D cursor ctrl register for Gen12

Currently the offset for PIPE D cursor control register is missing in
i915_reg.h due to which the cursor plane cannot be enabled for Pipe D.
This also causes kernel Warning, when a user requests to enable cursor
plane for PIPE D for Gen 12 platforms.

This patch adds the CURSOR_CTL_D register in the i915_reg.h.

v2: Rebase

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111640
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Lucas: remove extra blank line]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569310312-12313-1-git-send-email-ankit.k.nautiyal@intel.com

drm/i915/selftests: Verify the LRC register layout between init and HW

Before we submit the first context to HW, we need to construct a valid
image of the register state. This layout is defined by the HW and should
match the layout generated by HW when it saves the context image.
Asserting that this should be equivalent should help avoid any undefined
behaviour and verify that we haven't missed anything important!

Of course, having insisted that the initial register state within the
LRC should match that returned by HW, we need to ensure that it does.

v2: Drop the RELATIVE_MMIO flag from gen11, we ignore it for
constructing the lrc image.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924145950.3011-1-chris@chris-wilson.co.uk

drm/i915: Add TigerLake bandwidth checking

Added bandwidth calculation algorithm and checks,
similar way as it was done for ICL, some constants
were corrected according to BSpec 53998.

v2: Start using same icl_get_bw_info function to avoid
    code duplication. Moved mpagesize to memory info
    related structure as it is now dependent on memory type.
    Fixed qi.t_bl field assignment.

v3: Removed mpagesize as unused. Duplicate code and redundant blankline
    fixed.

v4: Changed ordering of IS_GEN checks as agreed. Minor commit
    message fixes.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111600
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920083754.5920-1-stanislav.lisovskiy@intel.com

drm/i915: Mark contents as dirty on a write fault

Since dropping the set-to-gtt-domain in commit a679f58d0510 ("drm/i915:
Flush pages on acquisition"), we no longer mark the contents as dirty on
a write fault. This has the issue of us then not marking the pages as
dirty on releasing the buffer, which means the contents are not written
out to the swap device (should we ever pick that buffer as a victim).
Notably, this is visible in the dumb buffer interface used for cursors.
Having updated the cursor contents via mmap, and swapped away, if the
shrinker should evict the old cursor, upon next reuse, the cursor would
be invisible.

E.g. echo 80 > /proc/sys/kernel/sysrq ; echo f > /proc/sysrq-trigger

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111541
Fixes: a679f58d0510 ("drm/i915: Flush pages on acquisition")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920121821.7223-1-chris@chris-wilson.co.uk

drm/i915: Prevent bonded requests from overtaking each other on preemption

Force bonded requests to run on distinct engines so that they cannot be
shuffled onto the same engine where timeslicing will reverse the order.
A bonded request will often wait on a semaphore signaled by its master,
creating an implicit dependency -- if we ignore that implicit dependency
and allow the bonded request to run on the same engine and before its
master, we will cause a GPU hang. [Whether it will hang the GPU is
debatable, we should keep on timeslicing and each timeslice should be
"accidentally" counted as forward progress, in which case it should run
but at one-half to one-third speed.]

We can prevent this inversion by restricting which engines we allow
ourselves to jump to upon preemption, i.e. baking in the arrangement
established at first execution. (We should also consider capturing the
implicit dependency using i915_sched_add_dependency(), but first we need
to think about the constraints that requires on the execution/retirement
ordering.)

Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
References: ee1136908e9b ("drm/i915/execlists: Virtual engine bonding")
Testcase: igt/gem_exec_balancer/bonded-slice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-3-chris@chris-wilson.co.uk

drm/i915: Fixup preempt-to-busy vs reset of a virtual request

Due to the nature of preempt-to-busy the execlists active tracking and
the schedule queue may become temporarily desync'ed (between resubmission
to HW and its ack from HW). This means that we may have unwound a
request and passed it back to the virtual engine, but it is still
inflight on the HW and may even result in a GPU hang. If we detect that
GPU hang and try to reset, the hanging request->engine will no longer
match the current engine, which means that the request is not on the
execlists active list and we should not try to find an older incomplete
request. Given that we have deduced this must be a request on a virtual
engine, it is the single active request in the context and so must be
guilty (as the context is still inflight, it is prevented from being
executed on another engine as we process the reset).

Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-2-chris@chris-wilson.co.uk

drm/i915: Fixup preempt-to-busy vs resubmission of a virtual request

As preempt-to-busy leaves the request on the HW as the resubmission is
processed, that request may complete in the background and even cause a
second virtual request to enter queue. This second virtual request
breaks our "single request in the virtual pipeline" assumptions.
Furthermore, as the virtual request may be completed and retired, we
lose the reference the virtual engine assumes is held. Normally, just
removing the request from the scheduler queue removes it from the
engine, but the virtual engine keeps track of its singleton request via
its ve->request. This pointer needs protecting with a reference.

v2: Drop unnecessary motion of rq->engine = owner

Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-1-chris@chris-wilson.co.uk

drm/i915/tgl: Check the UC health of tc controllers after power on

New step added for TGL, required for us to check the TC
microcontroller health after power on TC aux.

BSpec: 49294

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-7-jose.souza@intel.com

drm/i915/icl: Unify disable and enable phy clock gating functions

Adding a enable parameters allow us to share most of the code between
enable and disable functions.

v3:
Renamed icl_phy_clock_gating() to icl_phy_set_clock_gating()

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-6-jose.souza@intel.com

drm/i915/tgl: Add dkl phy registers

These are the registers needed to program Dekel phy. Some register
definitions will be reused from MG PHY definitions, so adding a
comment on those.

Bspec: 49295

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-5-jose.souza@intel.com

drm/i915/tgl/pll: Set update_active_dpll

Commit 24a7bfe0c2d7 ("drm/i915: Keep the TypeC port mode fixed when the
port is active") added this new hook while in parallel TGL upstream was
happening and this was missed.

Without this driver will crash when TC DDI is added and driver is
preparing to do a full modeset.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-4-jose.souza@intel.com

drm/i915/tgl: Finish modular FIA support on registers

If platform supports and has modular FIA is enabled, the registers
bits also change, example: reading TC3 registers with modular FIA
enabled, driver should read from FIA2 but with TC1 bits offsets.

It is described in BSpec 50231 for DFLEXDPSP, other registers don't
have the BSpec description but testing in real hardware have proven
that it had moved for all other registers too.

v2:
- Caching index in tc_phy_fia_idx, instead of calculate it each time

v3:
- Setting tc_phy_fia and tc_phy_fia_idx in the same function

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-3-jose.souza@intel.com

drm/i915/tgl: Add missing ddi clock select during DP init sequence

Step 4.b was complete missed because it is only required to TC and TBT.

Bspec: 49190
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920205810.211048-2-jose.souza@intel.com

drm/i915/execlists: Refactor -EIO markup of hung requests

Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk

drm/i915: Only enqueue already completed requests

If we are asked to submit a completed request, just move it onto the
active-list without modifying it's payload. If we try to emit the
modified payload of a completed request, we risk racing with the
ring->head update during retirement which may advance the head past our
breadcrumb and so we generate a warning for the emission being behind
the RING_HEAD.

v2: Commentary for the sneaky, shared responsibility between functions.
v3: Spelling mistakes and bonus assertion

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-3-chris@chris-wilson.co.uk

drm/i915/execlists: Drop redundant list_del_init(&rq->sched.link)

Since amalgamating the queued and active lists in commit 422d7df4f090
("drm/i915: Replace engine->timeline with a plain list"), performing a
i915_request_submit() will remove the request from the execlists
priority queue.

References: 422d7df4f090 ("drm/i915: Replace engine->timeline with a plain list")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-2-chris@chris-wilson.co.uk

drm/i915/execlists: Relax assertion for a pinned context image on reset

A gpu hang can occur at any time, given a sufficiently angry gpu. An
example is when it forgets to perform a context-switch at the end of a
request, leaving us with a hanging GPU on a completed request. Here, we
may retire the request, only leaving its context alive via the active
barrier. When we reset the GPU on a completed request, we do not modify
its context image (just updating the ring state) and can safely defer
the assertion that we have the image pinned and ready to modify.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111639
Fixes: dffa8feb3084 ("drm/i915/perf: Assert locking for i915_init_oa_perf_state()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-1-chris@chris-wilson.co.uk

drm/i915: pass i915 to intel_modeset_init() and intel_modeset_init_hw()

In general, prefer struct drm_i915_private * over struct drm_device *
when either will do. Rename the local variables to i915. No functional
changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-6-jani.nikula@intel.com

drm/i915: abstract intel_mode_config_init() from intel_modeset_init()

The i915 specific mode config init code is too specific and detailed to
have open in a high level function. Abstract away. No functional
changes.

v2: nest drm_mode_config_init() in the function too (Chris)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-5-jani.nikula@intel.com

drm/i915: abstract intel_panel_sanitize_ssc() from intel_modeset_init()

The code is too specific and detailed to have open in a high level
function. Abstract away. As a drive-by improvement switch to using
enableddisabled() in logging and git rid of a redundant !!. No
functional changes.

v2: drop the !! while at it too (Chris)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-4-jani.nikula@intel.com

drm/i915: pass i915 to intel_modeset_driver_remove()

In general, prefer struct drm_i915_private * over struct drm_device *
when either will do. Rename the local variable to i915. Also propagate
to intel_hpd_poll_fini(). No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-3-jani.nikula@intel.com

drm/i915: pass i915 to i915_driver_modeset_probe()

In general, prefer struct drm_i915_private * over struct drm_device *
when either will do. Rename the local variable to i915. No functional
changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-2-jani.nikula@intel.com

drm/i915: add i915_driver_modeset_remove()

For completeness, add counterpart to i915_driver_modeset_probe() and
remove the asymmetry in the probe/remove parts. No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920185421.17822-1-jani.nikula@intel.com

drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend

When audio power domain is suspended, the display driver must
save state of AUD_FREQ_CNTRL on Tiger Lake and Ice Lake
systems. The initial value of the register is set by BIOS and
is read by driver during the audio component init sequence.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920083918.27057-1-kai.vehmanen@linux.intel.com

drm/i915/dsb: Documentation for DSB.

Added docbook info regarding Display State Buffer(DSB) which
is added from gen12 onwards to batch submit display HW programming.

v1: Initial version as RFC.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-11-animesh.manna@intel.com

drm/i915/dsb: Enable DSB for gen12.

Enabling DSB by setting 1 to has_dsb flag for gen12.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-10-animesh.manna@intel.com

drm/i915/dsb: Enable gamma lut programming using DSB.

Gamma lut programming can be programmed using DSB
where bulk register programming can be done using indexed
register write which takes number of data and the mmio offset
to be written.

Currently enabled for 12-bit gamma LUT which is enabled by
default and later 8-bit/10-bit will be enabled in future
based on need.

v1: Initial version.
v2: Directly call dsb-api at callsites. (Jani)
v3:
- modified the code as per single dsb instance per crtc. (Shashank)
- Added dsb get/put call in platform specific load_lut hook. (Jani)
- removed dsb pointer from dev_priv. (Jani)
v4: simplified code by dropping ref-count implementation. (Shashank)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-9-animesh.manna@intel.com

drm/i915/dsb: function to trigger workload execution of DSB.

Batch buffer will be created through dsb-reg-write function which can have
single/multiple request based on usecase and once the buffer is ready
commit function will trigger the execution of the batch buffer. All
the registers will be updated simultaneously.

v1: Initial version.
v2: Optimized code few places. (Chris)
v3: USed DRM_ERROR for dsb head/tail programming failure. (Shashank)
v4: reset ins_start_offset after commit. (Jani)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-8-animesh.manna@intel.com

drm/i915/dsb: functions to enable/disable DSB engine.

DSB will be used for performance improvement for some special scenario.
DSB engine will be enabled based on need and after completion of its work
will be disabled. Api added for enable/disable operation by using DSB_CTRL
register.

v1: Initial version.
v2: POSTING_READ added after writing control register. (Shashank)
v3: cosmetic changes done. (Shashank)

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-7-animesh.manna@intel.com

drm/i915/dsb: Check DSB engine status.

As per bspec check for DSB status before programming any
of its register. Inline function added to check the dsb status.

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-6-animesh.manna@intel.com

drm/i915/dsb: Indexed register write function for DSB.

DSB can program large set of data through indexed register write
(opcode 0x9) in one shot. DSB feature can be used for bulk register
programming e.g. gamma lut programming, HDR meta data programming.

v1: initial version.
v2: simplified code by using ALIGN(). (Chris)
v3: ascii table added as code comment. (Shashank)
v4: cosmetic changes done. (Shashank)
v5: reset ins_start_offset. (Jani)
v6: update ins_start_offset in inel_dsb_reg_write.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-5-animesh.manna@intel.com

drm/i915/dsb: single register write function for DSB.

DSB support single register write through opcode 0x1. Generic
api created which accumulate all single register write in a batch
buffer and once DSB is triggered, it will program all the registers
at the same time.

v1: Initial version.
v2: Unused macro removed and cosmetic changes done. (Shashank)
v3: set free_pos to zero in dsb-put() instead dsb-get() and
a cosmetic change. (Shashank)
v4: macro of indexed-write is moved. (Shashank)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-4-animesh.manna@intel.com

drm/i915/dsb: DSB context creation.

This patch adds a function, which will internally get the gem buffer
for DSB engine. The GEM buffer is from global GTT, and is mapped into
CPU domain, contains the data + opcode to be feed to DSB engine.

v1: Initial version.

v2:
- removed some unwanted code. (Chris)
- Used i915_gem_object_create_internal instead of _shmem. (Chris)
- cmd_buf_tail removed and can be derived through vma object. (Chris)

v3: vma realeased if i915_gem_object_pin_map() failed. (Shashank)

v4: for simplification and based on current usage added single dsb
object in intel_crtc. (Shashank)

v5: seting NULL to cmd_buf moved outside of mutex in dsb-put(). (Shashank)

v6:
- refcount machanism added.
- Used atomic_add_return and atomic_dec_and_test instead of
atomic_inc and atomic_dec. (Jani)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
[Jani: added #include <linux/types.h> while pushing]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-3-animesh.manna@intel.com

drm/i915/dsb: feature flag added for display state buffer.

Display State Buffer(DSB) is a new hardware capability, introduced
in GEN12 display. DSB allows a driver to batch-program display HW
registers.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190920115930.27829-2-animesh.manna@intel.com

drm/i915/color: Extract icl_read_luts()

For icl+, have hw read out to create hw blob of gamma
lut values. icl+ platforms supports multi segmented gamma
mode by default, add hw lut creation for this mode.

This will be used to validate gamma programming using dsb
(display state buffer) which is a tgl specific feature.

Major change done-removal of readouts of coarse and fine segments
because PAL_PREC_DATA register isn't giving propoer values.
State checker limited only to "fine segment"

v2: -readout code for multisegmented gamma has to come
     up with some intermediate entries that aren't preserved
     in hardware (Jani N)
    -linear interpolation (Ville)
    -moved common code to check gamma_enable to specific funcs,
     since icl doesn't support that
v3: -use u16 instead of __u16 [Jani N]
    -used single lut [Jani N]
    -improved and more readable for loops [Jani N]
    -read values directly to actual locations and then fill gaps [Jani N]
    -moved cleaning to patch 1 [Jani N]
    -renamed icl_read_lut_multi_seg() to icl_read_lut_multi_segment to
     make it similar to icl_load_luts()
    -renamed icl_compute_interpolated_gamma_blob() to
     icl_compute_interpolated_gamma_lut_values() more sensible, I guess
v4: -removed interpolated func for creating gamma lut values
    -removed readouts of fine and coarse segments, failure to read PAL_PREC_DATA
     correctly

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569096654-24433-3-git-send-email-swati2.sharma@intel.com

drm/i915/color: Fix formatting issues

Fixed few formatting issues in multi-segmented load_lut().

v3: -style nitting [Jani]
    -balanced parentheses moved from patch 2 to 1 [Jani]
    -subject prefix change [Jani]
    -added commit message [Jani]
v4: -rearranged INDEX register write in ilk_read_luts()

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1569096654-24433-2-git-send-email-swati2.sharma@intel.com

drm/i915/tgl: s/ss/eu fuse reading support

Gen12 has dual-subslices (DSS), which compared to gen11 subslices have
some duplicated resources/paths. Although DSS behave similarly to 2
subslices, instead of splitting this and presenting userspace with bits
not directly representative of hardware resources, present userspace
with a subslice_mask made up of DSS bits instead.

v2: GEM_BUG_ON on mask size (Lionel)

Bspec: 29547
Bspec: 12247
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
CC: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com> #v1
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913075137.18476-2-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Add PIPECONF YCbCr 4:4:4 programming for ILK-IVB

On ILK-IVB the pipe colorspace is configured via PIPECONF
(as opposed to PIPEMISC in BDW+). Let's configure+readout
that stuff correctly.

Enabling YCbCr 4:4:4 output will now be a simple matter of
setting crtc_state->output_format appropriately in the encoder
.compute_config(). However, when we do that we must be
aware of the fact that YCbCr DP output doesn't seem to work
on ILK (resulting image is totally garbled), but on SNB+
it works fine. However HDMI YCbCr output does work correctly
even on ILK.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-13-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Set up ILK/SNB csc unit properly for YCbCr output

Prepare the pipe csc for YCbCr output on ilk/snb. The main difference
to IVB+ is the lack of explicit post offsets, and instead we must
configure the CSC info RGB->YUV mode (which takes care of offsetting
Cb/Cr properly) and enable the "black screen offset" bit to add the
required offset to Y.

And while at it throw some comments around the bit defines to
document which platforms have which bits.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-12-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Document ILK+ pipe csc matrix better

Add comments to explain the ilk pipe csc operation a bit better.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-11-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Add PIPECONF YCbCr 4:4:4 programming for HSW

On HSW the pipe colorspace is configured via PIPECONF
(as opposed to PIPEMISC in BDW+). Let's configure+readout
that stuff correctly.

Enabling YCbCr 4:4:4 output will now be a simple matter of
setting crtc_state->output_format appropriately in the encoder
.compute_config().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-10-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Simplify intel_get_crtc_ycbcr_config()

Make intel_get_crtc_ycbcr_config() simpler and rename it
to bdw_get_pipemisc_output_format() to better reflect what
it does.

Also toss in some comments to document that the 4:2:0 PIPECONF
bits are glk+ only. They are mbz on earlier platforms so reading
them unconditionally is safe however.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-9-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Don't look at unrelated PIPECONF bits for interlaced readout

Since HSW the PIPECONF progressive vs. interlaced selection is done
with just two bits instead of the earlier three. Let's not look at the
extra bit on HSW+. Also gen2 doesn't support interlaced displays at all.

This is actually fine as is currently because the extra bit is mbz (as
are all three bits on gen2). But just to avoid mishaps in the future
if the bits get reused let's only look at what's properly defined.

v2: constify crtc_state

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-8-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Never set limited_color_range=true for YCbCr output

crtc_state->limited_color_range only applies to RGB output but
we're currently setting it even for YCbCr output. That will
lead to conflicting MSA and PIPECONF settings which can mess
up the image. Let's make sure limited_color_range stays unset
with YCbCr output.

Also WARN if we end up with such a bogus combination when
programming the MSA MISC bits as it's impossible to even
indicate quantization rangle for YCbCr via MSA MISC. YCbCr
output is simply assumed to be limited range always. Note
that VSC SDP does provide a mechanism for full range YCbCr,
so in the future we may want to rethink how we compute/store
this state.

And for good measure we add the same WARN to the HDMI path.

v2: s/==/!=/ in the HDMI WARN

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718164523.11738-1-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>

drm/i915: Extract intel_hdmi_limited_color_range()

Pull the code for computing the limited color range
setting into a small helper. We'll add a bit more to it
later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-5-ville.syrjala@linux.intel.com
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>