xl2tpd: update to 1.3.10

lock is no longer needed and it breaks the setup
explicit added PKG_BUILD_DEPENDS:=libpcap, an indirect depend included in ppp and needed for pfc

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>

Merge pull request #4954 from kissg1988/django

django: update to 1.8.18

Merge pull request #4958 from sartura/libuv_bump_to_1.15.0

libuv: bump to 1.15.0

Merge pull request #4959 from philenotfound/mutt-bump

mutt: bump version

Merge pull request #4966 from sartura/clamav_fix_build_issues

clamav: fix build issues

clamav: fix invalid zlib version error

ClamAV's configure script uses grep to check for bugy zlib version
1.2.1. Since current OpenWrt zlib version is 1.2.11 this check passes
and build fails. This patch will disable this unneeded check and make
sure we are looking for zlib on the right location.

clamdtop was beeing built without it's ncurses dependency. Build system
would link it to the host's ncurses making the program fail at run time.
This patch will disable building of optional clamdtop, otherwise we need
to add ncurses as a dependency and fix the search path.

Increase PKG_RELEASE to reflect changes.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>

Merge pull request #4965 from lucize/doveup

dovecot: update to 2.2.33.1

Merge pull request #4962 from diizzyy/patch-96

sound/lame: Update to 3.100

Merge pull request #4967 from dibdot/adblock

adblock: update 3.0.3

mutt: bump version

* no-po-no-docs patch reworked, docs are disabled via ./configure now
* drop CVE patch, fix already in upstream
* autoreconf to fix CI build

Signed-off-by: Phil Eichinger <phil@zankapfel.net>

adblock: update 3.0.3

* add new list source to default config to block browser-based
  crypto mining

Signed-off-by: Dirk Brenken <dev@brenken.org>

dovecot: update to 2.2.33.1

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>

django: update to 1.8.18

Fixes CVE-2017-7233 and CVE-2017-7234

Signed-off-by: Gergely Kiss <mail.gery@gmail.com>

sound/lame: Update to 3.100

* Update LAME to 3.100

* Switch to shared library instead of static binary as it adds very little
  overhead if you only need LAME binary but saves space if you need both
  library and binary.

  Static / Shared:
  LAME binary: ~252kbyte / ~72kbyte - IPK: ~138kbyte / ~34kbyte
  LAME library: ~216kbyte / ~216kbyte - IPK: ~117kbyte / ~117kbyte

* Drop patch, not needed

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Merge pull request #4955 from kissg1988/sudo

sudo: update to 1.8.21p2

Merge pull request #4957 from sartura/vim_bump_to_8.0.586

vim: bump to 8.0.586

Merge pull request #4960 from philenotfound/at-bump

at: bump version

at: bump version

Signed-off-by: Phil Eichinger <phil@zankapfel.net>

libuv: bump to 1.15.0

Update libuv to version 1.15.0

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>

vim: bump to 8.0.586

Upgrade vim to version 8.0.586

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>

Merge pull request #4953 from pprindeville/perl-move-rdynamic

Perl move -rdynamic

build,travis: fix SDK filename

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

build,travis: fix gpg verification warning

commit gpg keys into the repo (it sometimes timeout)
trust the keys ultimately

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

sudo: update to 1.8.21p2

Signed-off-by: Gergely Kiss <mail.gery@gmail.com>

perl: put -rdynamic in proper build variable

The standard way to pass -rdynamic (or -Wl,--dynamic-export) is via
the $ccdlflags variable.  Do what is best practice.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

perl: simplify passing in ldflags

Originally as PR #2383 but rewritten.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Alexander Ryzhov <openwrt@ryzhov-al.ru>

Merge pull request #4952 from jp-bennett/master

qrencode:  Update to 4.0.0

qrencode:  Update to 4.0.0

Adds a minor patch to optionally omit the XML tag when including svg inline.
Singed-off-by: Jonathan Bennett <JBennett@Incomsystems.biz>

Merge pull request #4948 from ldir-EDB0/remwireguard

wireguard: drop wireguard

Merge pull request #4951 from jp-bennett/master

Fwknopd: Bump PKG_RELEASE and minor fix

Fwknopd: Bump PKG_RELEASE and minor fix

An unneccesary include in the init file was causing problems when using the package builder.
Signed-off-by: Jonathan Bennett <JBennett@incomsystems.biz>

Merge pull request #4924 from oldium/fwknopd-init-script

fwknop: Add start-up dependency on network interface for fwknopd.

Merge pull request #4942 from DocLM/gphoto2

ibgphoto2 and gphoto2: Update to 2.5.16 and 2.5.15

Merge pull request #4949 from commodo/python-lxml-update

python-lxml: update to version 4.1.0

Merge pull request #4947 from commodo/tcpreplay-update

tcpreplay: update to version 4.2.5

Merge pull request #4950 from StevenHessing/noddos

noddos: noddos v0.5.3

noddos: noddos v0.5.3

Signed-off-by: Steven Hessing <steven.hessing@gmail.com>

python-lxml: update to version 4.1.0

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

wireguard: drop wireguard

WireGuard was added to LEDE core. See discussion at
lede-project/source#1409

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

Merge pull request #4732 from hashashin/bash-4.4.12

bash: version bump to 4.4.12

tcpreplay: update to version 4.2.5

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

gphoto2: update package to 2.5.15

Signed-off-by: Leonardo Medici <leonardo_medici@me.com>

libgphoto2: update package to 2.5.16

Signed-off-by: Leonardo Medici <leonardo_medici@me.com>

pulseaudio: update to 11.1

Signed-off-by: Peter Wagner <tripolar@gmx.at>

glib2: update to 2.54.1

Signed-off-by: Peter Wagner <tripolar@gmx.at>

memcached: update to version 1.5.2

Signed-off-by: Thomas Heil <heil@terminal-consulting.de>

haproxy: disable lua on mips
 - to fix  #4606 we disable to lua build for haproxy
   depending on CONFIG_mips = y

Signed-off-by: Thomas Heil <heil@terminal-consulting.de>

haproxy update to 1.7.9 and pending patches
 - update lua to 5.3.4

Signed-off-by: Thomas Heil <heil@terminal-consulting.de>

acpid: update to 2.0.28

Signed-off-by: Thomas Heil <heil@terminal-consulting.de>

apache: update to 2.4.28
 - fix CVE-2017-9798
 - fix #4926
  make http2 support configurable, in case of enables libnghttp2
  package dont build http2. instead use CONFIG_APACHE_HTTP2 to
  enable http2 support

Signed-off-by: Thomas Heil <heil@terminal-consulting.de>

Merge pull request #4873 from jcadduono/minidlna-update

minidlna: update to version 1.2.1

Merge pull request #4927 from EricLuehrsen/unbound_167

unbound: update to 1.6.7

Merge pull request #4923 from neheb/patch-2

btrfs-progs: Update to 4.13.2

unbound: update to 1.6.7

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>

btrfs-progs: Update to 4.13.2

Tested on mt7621 (ramips).

Signed-off-by: Rosen Penev <rosenp@gmail.com>

fwknop: Add start-up dependency on network interface for fwknopd.

Added new "network" section with option "network", which takes network
interface name.

The start-up is migrated to use procd and depend either on the "network"
interface (after resolving it to a physical device), or on the PCAP_INTF
option from "config" section (usual place for raw interface name for
fwknopd). When the uci_enabled option is disabled, the value of PCAP_INTF
is taken from the user-provided fwknopd.conf.

Also fixed UCI_ENABLED variable evaluation.

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>

Merge pull request #4887 from diizzyy/patch-94

net/l7-protocols: Remove from tree

net/l7-protocols: Remove from tree

The l7-filter project hasn't been active for a very long time and support in
OpenWrt/LEDE has been dropped making this package orphaned.

Support in qos-script removed: bdb6c313de367280ed17ad234136f133ceb37551
(SVN: r45425)
Support in tree removed: d0ba3bb1e24702e472eee2f3a5b7f9e4646b8ff1
(SVN: r45423)

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Merge pull request #4422 from diizzyy/patch-55

utils/f2fs-tools: Remove from tree

Merge pull request #4438 from hauke/freeradius3

freeradius3: fix CVE-2017-9148

freeradius3: fix CVE-2017-9148

This takes the fix for CVE-2017-9148 from Debian.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Merge pull request #4915 from antonlacon/ffmpeg-next

ffmpeg: 3.2.8 update

Merge pull request #4907 from stargieg/master

knxd: Fix config file location and init script.

Merge pull request #4899 from fededim/master

lftp: compilation bugfix for old openwrt buildroot

lftp: compilation bugfix for old openwrt buildroot

Signed-off-by: Federico Di Marco <fededim@gmail.com>

Merge pull request #4850 from p-wassi/pppoe-relay

net/rp-pppoe: fix typo in init script

Merge pull request #4909 from StevenHessing/noddos

noddos: v0.5.2, mDNS TXT parsing fix

libxml2: upgrade to 2.9.6

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

Merge pull request #4906 from ldir-EDB0/bumpwireguard

wireguard: bump to release 0.0.20171005

noddos: v0.5.2, mDNS TXT parsing fix

Signed-off-by: Steven Hessing <steven.hessing@gmail.com>

Merge pull request #4895 from lucize/postup

postfix: version bump to 3.2.3

Merge pull request #4908 from br101/horst

horst: Use https tar.gz instead of git download

knxd: Fix typo in sh vars „send-delay“ and „client-addrs“

Signed-off-by: Patrick Grimm <patrick@lunatiki.de>

knxd: Add uci config and knxd_args to ini convert

Signed-off-by: Patrick Grimm <patrick@lunatiki.de>

knxd: Fix config file location and init script.

Signed-off-by: Patrick Grimm <patrick@lunatiki.de>

horst: Use https tar.gz instead of git download

Signed-off-by: Bruno Randolf <br1@einfach.org>

wireguard: bump to release 0.0.20171005

Bump to latest release snapshot.

Tested on: ar71xx Archer c7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

Merge pull request #4896 from jcadduono/minidlna-sorting

minidlna: remove panasonic video grouping by directory patch

Merge pull request #4898 from br101/horst

horst: Update to version 5.1 and add init script

openssh: update to 7.6p1

Signed-off-by: Peter Wagner <tripolar@gmx.at>

ffmpeg: 3.2.8 update

Signed-off-by: Ian Leonard <antonlacon@gmail.com>

gnunet: update git snapshot

Start building with testing enabled as a preparation to eventually
packaging the testbed components.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

gnurl: update to version 7.55.1-4

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Merge pull request #4902 from pprindeville/acpica-bump-20170929

acpica-unix: update to 20170929

acpica-unix: update to 20170929

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

horst: Update to version 5.1 and add init script

Update to latest stable version and add init script and config file to start
horst in server mode as a service.

Signed-off-by: Bruno Randolf <br1@einfach.org>

minidlna: remove panasonic video grouping by directory patch

Unfortunately this is breaking sorting and causes some
issues with starting streams on various non-Panasonic
clients. Tested on 5 different models of 2014-2017
Samsung Smart TVs and BubbleUPnP for Android.
Removing this patch fixes sorting by filename and
clients no longer sometimes fail to load the streams.

Signed-off-by: James Christopher Adduono <jc@adduono.com>

Merge pull request #4897 from commodo/python-egg-info-disable

python,python3: add option to keep egg-info dirs for python packages

net/rp-pppoe: cleanup config options

Remove misspelled configuration options which were left in place
for reasons of backwards-compatibility.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>

net/rp-pppoe: fix typo in init script

Due to a typo in the init scripts, certain parameters are not appended
to the cmdline. (max. # of concurrent sessions).
For backwards compatibility leave both spellings in place.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>

less: update to 487

Signed-off-by: Peter Wagner <tripolar@gmx.at>

postfix: version bump to 3.2.3

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>

php7: upgrade to 7.1.10

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

python,python3: add option to keep egg-info dirs for python packages

That way some python packages can choose
to keep their egg-info dirs, if they want to, or they're needed.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

Merge pull request #4894 from StevenHessing/noddos

noddos: bump up to noddos v0.5.1

noddos: bump up to noddos v0.5.1

Signed-off-by: Steven Hessing <steven.hessing@gmail.com>

Merge pull request #4892 from fededim/master

lftp: updated to 4.8.2

Merge pull request #4891 from zx2c4/patch-10

wireguard: bump to release 0.0.20171001

lftp: updated to 4.8.2

Signed-off-by: Federico Di Marco <fededim@gmail.com>

wireguard: bump to release 0.0.20171001

Simple version bump.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>