drm/i915: fix wrong error number report

During driver load it's considered that the i915_driver_create()
function fails only in case of insufficient memory. Indeed, in
case of failure of i915_driver_create(), the load function
returns indiscriminately -ENOMEM ignoring the real cause of
failure.

In i915_driver_create() get the consistent error value from
drm_dev_init() and embed it in the pointer return value.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002092047.14705-1-andi.shyti@intel.com

drm/i915: Show actual alongside requested frequency in debugfs/i915_rps_boost_info

Previously we hesitated in adding the hw probe for the actual GPU
frequency for rps_boost as it is quite cumbersome, but given some
surprising HW behaviour it would be useful to know both the RPS boost
state and the actual HW state in one location.

v2: vlv/chv needs more tlc

Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002113221.29208-1-chris@chris-wilson.co.uk

drm/i915: Replace some open-coded i915_coherent_map_type()

A few callsites were deciding on using WC or WB maps based on
HAS_LLC(), so replace them with the equivalent helper function
i915_coherent_map_type().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001194447.29910-1-chris@chris-wilson.co.uk

drm/i915: Add plane alpha blending support, v2.

Add plane alpha blending support with the different blend modes.
This has been tested on a icl to show the correct results,
on earlier platforms small rounding errors cause issues. But this
already happens case with fully transparant or fully opaque RGB8888
fb's.

The recommended HW workaround is to disable alpha blending when the
plane alpha is 0 (transparant, hide plane) or 0xff (opaque, disable blending).
This is easy to implement on any platform, so just do that.

The tests for userspace are also available, and pass on gen11.

Changes since v1:
- Change mistaken < 0xff0 to 0xff00.
- Only set PLANE_KEYMSK_ALPHA_ENABLE when plane alpha < 0xff00, ignore blend mode.
- Rework disabling FBC when per pixel alpha is used.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Change MISSING_CASE default to explicit alpha disable (mattrope)]
Link: https://patchwork.freedesktop.org/patch/msgid/20180815103405.22679-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915/csr: Added ICL Stepping info

As DMC Package contain DMC FW for multiple steppings including default
stepping. This patch will help to load FW for that particular stepping,
if FW for that stepping is available, instead of loading default FW.

v2 : Fix formatting issue.

Signed-off-by: Jyoti Yadav <jyoti.r.yadav@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536169347-31326-1-git-send-email-jyoti.r.yadav@intel.com

drm/i915: Priority boost for waiting clients

Latency is in the eye of the beholder. In the case where a client stops
and waits for the gpu, give that request chain a small priority boost
(not so that it overtakes higher priority clients, to preserve the
external ordering) so that ideally the wait completes earlier.

v2: Tvrtko recommends to keep the boost-from-user-stall as small as
possible and to allow new client flows to be preferred for interactivity
over stalls.

Testcase: igt/gem_sync/switch-default
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-3-chris@chris-wilson.co.uk

drm/i915: Pull scheduling under standalone lock

Currently, the backend scheduling code abuses struct_mutex into order to
have a global lock to manipulate a temporary list (without widespread
allocation) and to protect against list modifications. This is an
extraneous coupling to struct_mutex and further can not extend beyond
the local device.

Pull all the code that needs to be under the one true lock into
i915_scheduler.c, and make it so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-2-chris@chris-wilson.co.uk

drm/i915: Priority boost for new clients

Taken from an idea used for FQ_CODEL, we give the first request of a
new request flows a small priority boost. These flows are likely to
correspond with short, interactive tasks and so be more latency sensitive
than the longer free running queues. As soon as the client has more than
one request in the queue, further requests are not boosted and it settles
down into ordinary steady state behaviour.  Such small kicks dramatically
help combat the starvation issue, by allowing each client the opportunity
to run even when the system is under heavy throughput load (within the
constraints of the user selected priority).

v2: Mark the preempted request as the start of a new flow, to prevent a
single client being continually gazumped by its peers.

Testcase: igt/benchmarks/rrul
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-1-chris@chris-wilson.co.uk

drm/i915: Pass intel_encoder to infoframe functions

Make life simpler by passing around intel_encoder instead of
drm_encoder.

@r1@
identifier F =~ "infoframe";
identifier I, M;
@@
F(
- struct drm_encoder *I
+ struct intel_encoder *I
  , ...)
{
<...
(
- I->M
+ I->base.M
|
- I
+ &I->base
)
...>
}

@r2@
identifier F =~ "infoframe";
identifier I;
type T, ST;
@@
ST {
...
T (*F)(
-        struct drm_encoder *I
+        struct intel_encoder *encoder
       , ...);
...
};

@@
identifier r1.F;
expression E;
@@
F(
- E
+ to_intel_encoder(E)
  ,...)

@@
identifier r2.F;
expression E, X;
@@
(
X.F(
-   E
+   to_intel_encoder(E)
    ,...)
|
X->F(
-    E
+    to_intel_encoder(E)
     ,...)
)

@@
expression E;
@@
(
- to_intel_encoder(&E->base)
+ E
|
- to_intel_encoder(&E->base.base)
+ &E->base
)

@@
identifier D, M;
expression E;
@@
 D = enc_to_dig_port(&E->base)
<...
(
- D->base.M
+ E->M
|
- &D->base
+ E
)
...>

@@
identifier D;
expression E;
type T;
@@
- T D = enc_to_dig_port(E);
... when != D

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-10-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use memmove() for punching the hole into infoframes

Replace the hand rolled memmove() with the real thing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-9-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Combine multiple internal plists into the same i915_priolist bucket

As we are about to allow ourselves to slightly bump the user priority
into a few different sublevels, packthose internal priority lists
into the same i915_priolist to keep the rbtree compact and avoid having
to allocate the default user priority even after the internal bumping.
The downside to having an requests[] rather than a node per active list,
is that we then have to walk over the empty higher priority lists. To
compensate, we track the active buckets and use a small bitmap to skip
over any inactive ones.

v2: Use MASK of internal levels to simplify our usage.
v3: Prevent overflow when SHIFT is zero.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-4-chris@chris-wilson.co.uk

drm/i915: Reserve some priority bits for internal use

In the next few patches, we will want to give a small priority boost to
some requests/queues but not so much that we perturb the user controlled
order. As such we will shift the user priority bits higher leaving
ourselves a few low priority bits for our internal bumping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-3-chris@chris-wilson.co.uk

drm/i915/selftests: Include arbitration points in preemption smoketest

Include a batch full of a page of arbitration points in order to provide
a window for inject_preempt_context() in the preemption smoketests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-2-chris@chris-wilson.co.uk

drm/i915/selftests: Split preemption smoke test into threads

When submitting chains to each engine, we can do so (mostly) in
parallel, so delegate submission to threads on a per-engine basis.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-1-chris@chris-wilson.co.uk

drm/i915/dp: optimize eDP 1.4+ link config fast and narrow

We've opted to use the maximum link rate and lane count for eDP panels,
because typically the maximum supported configuration reported by the
panel has matched the native resolution requirements of the panel, and
optimizing the link has lead to problems.

With eDP 1.4 rate select method and DSC features, this is decreasingly
the case. There's a need to optimize the link parameters. Moreover,
already eDP 1.3 states fast link with fewer lanes is preferred over the
wide and slow. (Wide and slow should still be more reliable for longer
cable lengths.)

Additionally, there have been reports of panels failing on arbitrary
link configurations, although arguably all configurations they claim to
support should work.

Optimize eDP 1.4+ link config fast and narrow.

Side note: The implementation has a near duplicate of the link config
function, with just the two inner for loops turned inside out. Perhaps
there'd be a way to make this, say, more table driven to reduce the
duplication, but seems like that would lead to duplication in the table
generation. We'll also have to see how the link config optimization for
DSC turns out.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105267
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905095321.13843-1-jani.nikula@intel.com

drm/i915/dp: Fix duplication of DEVICE_SERVICE_IRQ handling

There are two copies of the same code called from long and short
pulse handlers.

v2: Rebase due to s/int status/enum drm_connector_status in
intel_dp_detect()
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-6-dhinakaran.pandiyan@intel.com

drm/i915/dp: Kill intel_dp->detect_done flag

The intel_dp->detect_done flag is no more useful. Pull
intel_dp_long_pulse() into the lone caller,

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-5-dhinakaran.pandiyan@intel.com

drm/i915/dp: Do not grab crtc modeset lock in intel_dp_detect()

A crtc modeset lock was added for link retraining but
intel_dp_retrain_link() knows to take the necessary locks since
commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the
->post_hotplug() hook")
v2: Drop AUX power domain reference in the early return path

Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-4-dhinakaran.pandiyan@intel.com

drm/i915/dp: Use a local variable for intel_encoder *

We have two cases of intel_dp to intel_encoder conversions, use a
local variable to store the conversion.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-3-dhinakaran.pandiyan@intel.com

drm/i915/dp: Restrict link retrain workaround to external monitors

Commit '3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check,
unconditionally during long pulse"")' applies a work around for sinks
that don't signal link loss. The work around does not need to have to be
that broad as the issue was seen with only one particular monitor; limit
this only for external displays as eDP features like PSR turn off the link
and the driver ends up retraining the link seeeing that link is not
synchronized.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
References: 3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-2-dhinakaran.pandiyan@intel.com

drm/i915/dp: Fix link retraining comment in intel_dp_long_pulse()

Comment claims link needs to be retrained because the connected sink raised
a long pulse to indicate link loss. If the sink did so,
intel_dp_hotplug() would have handled link retraining. Looking at the
logs in Bugzilla referenced in commit '3cf71bc9904d ("drm/i915: Re-apply
Perform link quality check, unconditionally during long pulse"")', the
issue is that the sink does not trigger an interrupt. What we want is
->detect() from user space to check link status and retrain. Ville's
review for the original patch also indicates the same root cause. So,
rewrite the comment.

v2: Patch split and rewrote comment.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
References: 3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-1-dhinakaran.pandiyan@intel.com

drm/i915/execlists: Avoid kicking priority on the current context

If the request is currently on the HW (in port 0), then we do not need
to kick the submission tasklet to evaluate whether we should be
preempting itself in order to execute it again.

In the case that was annoying me:

   execlists_schedule: rq(18:211173).prio=0 -> 2
   need_preempt: last(18:211174).prio=0, queue.prio=2

We are bumping the priority of the first of a pair of requests running
in the current context. Then when evaluating preempt, we would see that
that our priority request is higher than the last executing request in
ELSP0 and so trigger preemption, not realising that our intended request
was already executing.

v2: As we assume state of the execlists->port[] that is only valid while
we hold the timeline lock we have to repeat some earlier tests that on
the validity of the node.
v3: Wrap guc submission under the timeline.lock as is now the way of all
things.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180925083205.2229-2-chris@chris-wilson.co.uk

drm/i915/csr: restructure CSR firmware definition macros

Use uniform prefixes for firmware path, version and size. Unify
alignments. Order macro groups as in the if ladder using them. Add
platform specific max firmware size macros for all platforms for clarity
in the if ladder. Place the max firmware size macros in the platform
specific macro groups.

No functional changes.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927075311.5076-1-jani.nikula@intel.com

drm/i915: Check for panel orientation quirks on eDP panels

So far we have only been calling
drm_connector_init_panel_orientation_property(), which checks for
panel orientation quirks in the drm_panel_orientation_quirks.c file,
for DSI panels as so far only devices with DSI panels have had panels
which are not mounted up right.

The new GPD win2 device uses a portrait screen in a landscape case,
so now we've a device with an eDP panel which needs the panel-orientation
property to let the fbcon code and userspace know that the image needs to
be fixed-up.

This commit makes intel_edp_init_connector() call
drm_connector_init_panel_orientation_property() so that the property
gets added.

Reported-and-tested-by: russianneuromancer@ya.ru
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180909133457.10636-2-hdegoede@redhat.com

drm/i915: Remove i915.enable_ppgtt override

Now that we are confident in providing full-ppgtt where supported,
remove the ability to override the context isolation.

v2: Remove faked aliasing-ppgtt for testing as it no longer is accepted.
v3: s/USES/HAS/ to match usage and reject attempts to load the module on
old GVT-g setups that do not provide support for full-ppgtt.
v4: Insulate ABI ppGTT values from our internal enum (later plans
involve moving ppGTT depth out of the enum, thus potentially breaking
ABI unless we document the current values).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926201222.5643-1-chris@chris-wilson.co.uk

drm/i915: Log HWS seqno consistently

We mix hexa- and decimal which is confusing when reading the logs. So make
the single odd one out instance decimal for consistency.

v2:
 * Do the intel_ringbuffer.c as well. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926145033.16318-1-tvrtko.ursulin@linux.intel.com

drm/i915: Trim partial view sg lists

Partial views are small but there can be many of them, and since the sg
list space for them is allocated pessimistically, we can save some slab by
trimming the unused tail entries.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926080353.20867-1-tvrtko.ursulin@linux.intel.com

drm/i915/selftests: Smoketest preemption

Very light stress test to bombard the submission backends with a large
stream with requests of randomly assigned priorities. Preemption will be
occasionally requested, but unlikely to ever succeed! (Although we may
build a long queue of requests and so may trigger an attempt to inject a
preempt context, as we emit no batch, the arbitration window is limited
to between requests inside the ringbuffer. The likelihood of actually
causing a preemption event is therefore very small. A later variant
should try to improve the likelihood of preemption events!)

v2: Include a second pattern with more frequent preemption

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180925083205.2229-1-chris@chris-wilson.co.uk

drm/i915/csr: bypass firmware request on i915.dmc_firmware_path=""

With i915.dmc_firmware_path="" it's obvious the intention is to disable
CSR firmware loading. Bypass the firmware request altogether in this
case, with more obvious debug logging.

v2: Use DRM_INFO for logging (Chris)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926133414.22073-3-jani.nikula@intel.com

drm/i915/csr: keep max firmware size together with firmare name and version

Move max firmware size to the same if ladder with firmware name and
required version. This allows us to detect the missing max size for a
platform without actually loading the firmware, and makes the whole
thing easier to maintain.

We need to move the power get earlier to allow for early return in the
missing platform case. While at it, extend the comment on why we return
with the reference held on errors.

We also need to move the module parameter override later to reuse the
max firmware size, which is independent of the override.

v2: Add comment on why we leak the wakeref on errors (Chris)

v3: Rebase

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926133414.22073-2-jani.nikula@intel.com

drm/i915/csr: keep firmware name and required version together

Having two separate if ladders gets increasingly hard to maintain. Put
them together.

v2: Rebase

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926133414.22073-1-jani.nikula@intel.com

drm/i915: Remove duplicated definition of intel_update_rawclk

A few line above we have another definition of intel_update_rawclk()
keeping that one as the function is implemented in intel_cdclk.c.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918204714.27306-6-jose.souza@intel.com

drm/i915: Move IPC WA #1141 to init_ipc()

symmetric_memory do not change after initialization so lets just set
ipc_enabled once for this WA.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918204714.27306-5-jose.souza@intel.com

drm/i915: Move SKL IPC WA to HAS_IPC()

SKL has IPC but it should not be set according to the WA, so lets
just mark as it don't have it to simply the code and avoid
unnecessary MMIO writes at every call to intel_enable_ipc().

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918204714.27306-4-jose.souza@intel.com

drm/i915: Do not modifiy reserved bit in gens that do not have IPC

IPC was only added in SKL+(actually we don't even enable for SKL due
WA) so without this change, driver was writing to a reserved bit.

Also removing the uncessary dev_priv->ipc_enabled = false; as now
gens without IPC will not have IPC enabled.

v2(Rodrigo):
- moved the new handling of WA #0477 to the next patch

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918204714.27306-3-jose.souza@intel.com

drm/i915: Unset reset pch handshake when PCH is not present in one place

Right now RESET_PCH_HANDSHAKE_ENABLE is enabled all the times inside
of intel_power_domains_init_hw() and if PCH is NOP it is unsed in
i915_gem_init_hw().
So making skl_pch_reset_handshake() handle both cases and calling
it for the missing gens in intel_power_domains_init_hw().
Ivybridge have a different register and bits but with the same
objective so moving it too.

v2(Rodrigo):
- handling IVYBRIDGE case inside intel_pch_reset_handshake()

v4(Rodrigo and Ville):
- moving the enable/disable decision to callers

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918204714.27306-2-jose.souza@intel.com

drm/i915/runtime_pm: Share code to enable/disable PCH reset handshake

Instead of have the same code spread into 4 platforms lets share it.
BXT do not have a PCH so here also handling this case by unseting
RESET_PCH_HANDSHAKE_ENABLE.

v2(Rodrigo):
- renamed to intel_pch_reset_handshake()
- added comment about why BXT need the bit to be unset

v3(Rodrigo and Ville):
- added bool have_pch to intel_pch_reset_handshake()
- added back BXT comment

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918204714.27306-1-jose.souza@intel.com

drm/i915/icl: Define TA_TIMING_PARAM registers

This patch defines DSI_TA_TIMING_PARAM and
DPHY_TA_TIMING_PARAM registers used in
dphy programming.

v2: Changes (Jani N)
    - Define mask/shift for bitfields
    - Use bitfields name as per BSPEC
    - Define remaining bitfields

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1537095223-5184-8-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: Define data/clock lanes dphy timing registers

This patch defines DSI_CLK_TIMING_PARAM, DPHY_CLK_TIMING_PARAM,
DSI_DATA_TIMING_PARAM, DPHY_DATA_TIMING_PARAM register used in
dphy programming.

v2: Define mask/shift for bitfields and keep names as per BSPEC (Jani N)

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1537095223-5184-6-git-send-email-madhav.chauhan@intel.com

drm/i915: Avoid compiler warning for maybe unused gu_misc_iir

/kisskb/src/drivers/gpu/drm/i915/i915_irq.c: warning: 'gu_misc_iir' may be used uninitialized in this function [-Wuninitialized]:  => 3120:10

Silence the compiler warning by ensuring that the local variable is
initialised and removing the guard that is confusing the older gcc.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: df0d28c185ad ("drm/i915/icl: GSE interrupt moves from DE_MISC to GU_MISC")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926104718.17462-1-chris@chris-wilson.co.uk

drm/i915: Convert to BITS_PER_TYPE

In commit 9144d75e22ca ("include/linux/bitops.h: introduce BITS_PER_TYPE"),
we made BITS_PER_TYPE available to all and now we can use the macro to
replace some open-coded computation of sizeof(T) * BITS_PER_BYTE.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926104707.17410-1-chris@chris-wilson.co.uk

Merge drm/drm-next into drm-intel-next-queued

Catch up in general, and get DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT
specifically.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Check fb stride against plane max stride

commit 4e0b83a567e2 ("drm/i915: Extract per-platform plane->check()
functions") removed the plane max stride check for sprite planes.
I was going to add it back when introducing GTT remapping for the
display, but after further thought it seems better to re-introduce
it separately.

So let's add the max stride check back. And let's do it in a nicer
form than what we had before and do it for all plane types (easy
now that we have the ->max_stride() plane vfunc).

Only sprite planes really need this for now since primary planes
are capable of scanning out the current max fb size we allow, and
cursors have more stringent stride checks elsewhere.

Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 4e0b83a567e2 ("drm/i915: Extract per-platform plane->check() functions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918140243.12207-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915: Enable RGB565 90/270 plane rotation for gen11 onwards.

From gen11 onwards RGB565 90/270 plane rotation is supported on hardware.

IGT: https://patchwork.freedesktop.org/series/48756/
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[mlankhorst: Rebase on top of current dinq (self), fix grammar (Ville).]
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1535373473-3594-3-git-send-email-juhapekka.heikkila@gmail.com

drm/i915: Match code to comment and enforce ppgtt for execlists

Our execlist dispatch code requires a ppGTT so make sure we enforce that
option in intel_sanitize_enable_ppgtt(). The comment already tries to
explain that execlists requires ppgtt, but was written when gen8 may
have also taken the legacy path; so rewrite the code to match the
comment by using HAS_EXECLISTS() feature instead of the gen.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180922141804.21183-1-chris@chris-wilson.co.uk

drm/i915: use for_each_pipe loop to assign crtc_mask

This cleanup patch makes changes to use for_each_pipe loop
during bit-mask assignment of allowed crtc with encoder.

changes:
 - use BIT(i) macro instead of (1 << i) (Chris)
changes from V2:
 - use int for consistency (Jani)
changes from V3:
 - instead use enum pipe (Ville)
changes from V4:
 - drop DP/HDMI changes, as already part of patch from ville

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919083126.31805-1-mahesh1.kumar@intel.com

drm/i915/execlists: Assert the queue is non-empty on unsubmitting

In the sequence

<0>[  531.960431] drv_self-4806    7.... 527402570us : intel_gpu_reset: engine_mask=1, ret=0, retry=0
<0>[  531.960431] drv_self-4806    7.... 527402571us : execlists_reset: rcs0 request global=115de, current=71133
<0>[  531.960431] drv_self-4806    7d..1 527402571us : execlists_cancel_port_requests: rcs0:port0 global=71134 (fence 826b:198), (current 71133)
<0>[  531.960431] drv_self-4806    7d..1 527402572us : execlists_cancel_port_requests: rcs0:port1 global=71135 (fence 826c:53), (current 71133)
<0>[  531.960431] drv_self-4806    7d..1 527402572us : __i915_request_unsubmit: rcs0 fence 826c:53 <- global=71135, current 71133
<0>[  531.960431] drv_self-4806    7d..1 527402579us : __i915_request_unsubmit: rcs0 fence 826b:198 <- global=71134, current 71133
<0>[  531.960431] drv_self-4806    7.... 527402613us : intel_engine_cancel_stop_cs: rcs0
<0>[  531.960431] drv_self-4806    7.... 527402624us : execlists_reset_finish: rcs0

we are missing the execlists_submission_tasklet() invocation before the
execlists_reset_fini() implying that either the queue is empty, or we
failed to schedule and run the tasklet on finish. Add an assert so we
are sure that on unsubmitting the incomplete request after reset, the
queue is indeed populated.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919195544.1511-12-chris@chris-wilson.co.uk

drm/i915/icl: Program T_INIT_MASTER registers

This patch programs the time (in escape clocks) to drive
the link in the initialization (i.e. LP-11) state.

v2: Rebase
v3: Remove step hard coding comments (Jani N)

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1537095223-5184-5-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: Enable DDI Buffer

This patch enables DDI buffer by writing to DDI_BUF_CTL
register and wait for DDI status to be *not idle* for a
port.

v2: Rebase
v3: Remove step hard coding comments (Jani N)

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1537095223-5184-4-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: DSI vswing programming sequence

This patch setup voltage swing before enabling
combo PHY DDI (shared with DSI).
Note that DSI voltage swing programming is for
high speed data buffers. HW automatically handles
the voltage swing for the low power data buffers.

v2: Rebase
v3: Address various review comments related to VSWING
    programming (Jani N)

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1537095223-5184-3-git-send-email-madhav.chauhan@intel.com

drm/i915/icl: Configure lane sequencing of combo phy transmitter

This patch set the loadgen select and latency optimization for
aux and transmit lanes of combo phy transmitters. It will be
used for MIPI DSI HS operations.

v2: Rebase
v3: Add empty line to make code more legible (Ville).

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1537095223-5184-2-git-send-email-madhav.chauhan@intel.com

drm/i915: Force planar YUV coordinates to be a multiple of 2, v2.

We can't make NV12 work any other way. The scaler doesn't handle odd
coordinates well, and we will get visual corruption on the screen.

Changes since v1:
- Put the check in intel_plane_check_src_coordinates. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-9-maarten.lankhorst@linux.intel.com

drm/i915: Move programming plane scaler to its own function.

This cleans the code up slightly, and will make other changes easier.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-8-maarten.lankhorst@linux.intel.com

drm/i915: Clean up scaler setup, v2.

On skylake we can switch to a high quality scaler mode when only 1 out
of 2 scalers are used, but on GLK and later bit 28 has a different
meaning. Don't set it, and make clear the distinction between
SKL and later PS values.

Changes since v1:
- Add missing break statement.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mlankhorst: Remove extra newline]
Link: https://patchwork.freedesktop.org/patch/msgid/20180921144437.20037-1-maarten.lankhorst@linux.intel.com

drm/i915: Replace call to commit_planes_on_crtc with internal update, v2.

drm_atomic_helper_commit_planes_on_crtc calls begin_commit,
then plane_update hooks, then flush_commit. Because we keep our own
visibility tracking through plane_state->visible there's no need to
rely on the atomic hooks for this.

By explicitly writing our own helper, we can update visible planes
as needed, which is useful to make NV12 support work as intended.

Changes since v1:
- Reword commit message. (Matt Roper)
- Rename to intel_update_planes_on_crtc(). (Matt)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-6-maarten.lankhorst@linux.intel.com

drm/i915: Make intel_crtc_disable_planes() use active planes mask.

This will only disable planes we actually had marked as visible in
crtc_state->visible_planes and cleans up intel_crtc_disable_plane()
slightly.

This is also useful for when we start enabling NV12 support for gen11,
in which we will make the separate Y plane visible, but ignore the
Y plane's state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-5-maarten.lankhorst@linux.intel.com

drm/i915: Unconditionally clear plane visibility, v2.

We need to assume the plane has been visible before, even if no CRTC
is assigned to the plane. This is because when enabling a nv12 plane
on gen11, we will have to enable an extra plane and make it visible
by marking it in crtc_state->active_planes for
intel_update_planes_on_crtc().

Additionally, clear visible flag in intel_plane_atomic_check, in case
we ever hit a bug with visibility. Our code implicitly assumes that
plane_state->visible is only true when crtc and fb are set,
so we will either null deref in intel_fbc_choose_crtc() or
do something bad during the actual commit which cares even more.

Changes since v1:
- Unconditionally clear crtc_state->active_planes as well.
- Reword commit message, since this is now a preparation patch for
  NV12 Y / UV plane linking.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Clear nv12_planes in the beginning as well, clarify commit message]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-4-maarten.lankhorst@linux.intel.com

drm/i915: Handle cursor updating active_planes correctly, v2.

While we may not update new_crtc_state, we may clear active_planes
if the new cursor update state will disable the cursor, but we fail
after. If this is immediately followed by a modeset disable, we may
soon not disable the planes correctly when we start depending on
active_planes.

Changes since v1:
- Clarify why we cannot swap crtc_state. (Matt)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-3-maarten.lankhorst@linux.intel.com

drm/i915: Clean up casts to crtc_state in intel_atomic_commit_tail()

Use old/new_intel_crtc_state, and get rid of all the conversion casts
where they don't add anything.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-2-maarten.lankhorst@linux.intel.com

drm/i915: Update DRIVER_DATE to 20180921

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20180921

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-next

This is a new pull for drm-next on top of last weeks with the following
changes:
- Fixed 64 bit divide
- Fixed vram type on vega20
- Misc vega20 fixes
- Misc DC fixes
- Fix GDS/GWS/OA domain handling

Previous changes from last week:
amdgpu/kfd:
- Picasso (new APU) support
- Raven2 (new APU) support
- Vega20 enablement
- ACP powergating improvements
- Add ABGR/XBGR display support
- VCN JPEG engine support
- Initial xGMI support
- Use load balancing for engine scheduling
- Lots of new documentation
- Rework and clean up i2c and aux handling in DC
- Add DP YCbCr 4:2:0 support in DC
- Add DMCU firmware loading for Raven (used for ABM and PSR)
- New debugfs features in DC
- LVDS support in DC
- Implement wave kill for gfx/compute (light weight reset for shaders)
- Use AGP aperture to avoid gart mappings when possible
- GPUVM performance improvements
- Bulk moves for more efficient GPUVM LRU handling
- Merge amdgpu and amdkfd into one module
- Enable gfxoff and stutter mode on Raven
- Misc cleanups

Scheduler:
- Load balancing support
- Bug fixes

ttm:
- Bulk move functionality
- Bug fixes

radeon:
- Misc cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920150438.12693-1-alexander.deucher@amd.com

drm/i915/execlists: Onion unwind for logical_ring_init() failure

Fix up the error unwind for logical_ring_init() failing by moving the
cleanup into the callers who own the various bits of state during
initialisation, so we don't forget to free the state allocated by the
caller.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920195948.16448-1-chris@chris-wilson.co.uk

drm/i915: Park the GPU on module load

Once we have flushed the first request through the system to both load a
context and record the default state; tell the GPU to park and idle
itself, putting itself immediately (hopefully at least) into a
powersaving state, and allowing ourselves to start from known state
after setting up all our bookkeeping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920161343.1117-1-chris@chris-wilson.co.uk

drm/i915/selftests: Live tests emit requests and so require rpm

As we emit requests or touch HW directly for some of the live tests, the
requirement is that we hold the rpm wakeref before doing so. We want a
mix of granularity since we will want to test runtime suspend, so try to
mark up only the critical sections where we need rpm for the live test.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108002
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920144934.16611-1-chris@chris-wilson.co.uk

drm/i915: pass dev_priv to i915_gem_cleanup_stolen

It really wants dev_priv anyway, also now matches i915_gem_init_stolen.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920142707.19659-2-matthew.auld@intel.com

drm/i915: don't assume struct page in i915_sg_trim

If we copy all the contents of the sg across and not just the page link,
we can then also put it to work in fake_get_huge_pages and beyond.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920142707.19659-1-matthew.auld@intel.com

drm/i915/guc: Restore preempt-context across S3/S4

Stolen memory is lost across S4 (hibernate) or S3-RST as it is a portion
of ordinary volatile RAM. As we allocate our rings from stolen, this may
include the rings used for our preempt context and their breadcrumb
instructions. In order to allow preemption following hibernation and
loss of stolen memory, we therefore need to repopulate the instructions
inside the lost ring upon resume. To handle both module load and resume,
we simply defer constructing the ring to first use.

Testcase: igt/drv_selftest/live_gem
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919205432.18394-1-chris@chris-wilson.co.uk

drm/i915/selftests: Basic stress test for rapid context switching

We need to exercise the HW and submission paths for switching contexts
rapidly to check that features such as execlists' wa_tail are adequate.
Plus it's an interesting baseline latency metric.

v2: Check the initial request for allocation errors
v3: Use finite waits for more robust handling of broken code

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920105809.1872-1-chris@chris-wilson.co.uk

drm/i915/selftests: Free the batch along the contexts error path

Remember to release the batch bo reference if we hit an error trying to
submit our MI_STORE_DWORD_IMM.

References: https://bugs.freedesktop.org/show_bug.cgi?id=107979
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919195544.1511-9-chris@chris-wilson.co.uk

Merge tag 'du-next-20180914' of git://linuxtv.org/pinchartl/media into drm-next

R-Car DU changes for v4.20

The pull request mostly contains updates to the R-Car DU driver, notably
support for interlaced modes on Gen3 hardware, support for the LVDS output on
R8A77980, and a set of miscellaneous bug fixes. There are also two SPDX
conversion patches for the drm shmobile and panel-lvds drivers, as well as an
update to MAINTAINERS to add Kieran Bingham as a co-maintainer for the DU
driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3273568.LdoAI77IYW@avalon

drm/amdgpu: Exclude MM engines for vega20 virtual device

Temporary disable UVD/VCE block if is virtual device

Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add vega20 sriov capability detection

Add sriov capability detection for vega20, then can check if device is
virtual device.

Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-misc-next-2018-09-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 4.20:

UAPI Changes:
- None

Cross-subsystem Changes:
- None

Core Changes:
- Allow drivers to disable features with per-device granularity (Ville)
- Use EOPNOTSUPP when iface/feature is unsupported instead of
  EINVAL/errno soup (Chris)
- Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn)
- add quirk for LG LP140WF6-SPM1 eDP panel (Shawn)

Driver Changes:
- i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville)
- sun4i: add support for R40 HDMI PHY (Icenowy)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919200218.GA186644@art_vandelay

drm/amdgpu: move reserving GDS/GWS/OA into common code

We don't need that in the per ASIC code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: initialize GDS/GWS/OA domains even when they are zero sized

Stops crashing on SI.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix up GDS/GWS/OA shifting

That only worked by pure coincident. Completely remove the shifting and
always apply correct PAGE_SHIFT.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix shadow BO restoring

Don't grab the reservation lock any more and simplify the handling quite
a bit.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: always recover VRAM during GPU recovery

It shouldn't add much overhead and we should make sure that critical
VRAM content is always restored.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: shadow BOs don't need any alignment

They aren't directly used by the hardware.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: always enable shadow BOs v2

Even when GPU recovery is disabled we could run into a manually
triggered recovery.

v2: keep accidental removed comments

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop pipelining VM PDs/PTs moves

We are going to need this for recoverable page fault handling and it
makes shadow handling during GPU reset much more easier.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove fence fallback

DC doesn't seem to have a fallback path either.

So when interrupts doesn't work any more we are pretty much busted no
matter what.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: retrieve the updated clock table after OD

With OD settings applied, the clock table will be updated accordingly.
We need to retrieve the new clock tables then.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update OD to take voltage value instead of offset

With the latest SMC fw, we are able to get the voltage value for
specific frequency point. So, we update the OD relates to take
absolute voltage instead of offset.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update OD feature judgement

Update the conditions to judge whether an OD feature
should be supported on vega20.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix unknown vram mem type for vega20

vega20 should use umc_info v3_3 instead of v3_1. There are
serveral versions of umc_info for vega series. Compared to
various versions of these structures, vram_info strucure is
unified for vega series. The patch switch to query mem_type
from vram_info structure for all the vega series dGPU.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update vram_info structure in atomfirmware.h

atomfirmware has structure changes in varm_info. Updated it
to the latest one.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: change function signature to pass full range

In function ‘radeon_process_i2c_ch’ a comparison of a u8 value against
255 is done. Since it is always false, change the signature of this
function to use an `int` instead, which match the type used in caller:
`radeon_atom_hw_i2c_xfer`.

Fix the following warning triggered with W=1:

  CC [M]  drivers/gpu/drm/radeon/atombios_i2c.o
  drivers/gpu/drm/radeon/atombios_i2c.c: In function ‘radeon_process_i2c_ch’:
  drivers/gpu/drm/radeon/atombios_i2c.c:71:11: warning: comparison is always false due to limited range of data type [-Wtype-limits]
   if (num > ATOM_MAX_HW_I2C_READ) {
           ^

Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use processed values for counting

adev->gfx.rlc has the values from rlc_hdr already processed by
le32_to_cpu.  Using the rlc_hdr values on big-endian machines causes
a kernel Oops due to writing well outside of the array (0x24000000
instead of 0x24).

Signed-off-by: A. Wilcox <AWilcox@Wilcox-Tech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Avoid fault when allocating an empty buffer object

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop size check

We no don't allocate zero sized kernel BOs any longer.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: don't allocate zero sized kernel BOs

Just free the BO if the size should be zero.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop crashing on GDS/GWS/OA eviction

Simply ignore any copying here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add GDS, GWS and OA debugfs files

Additional to the existing files for VRAM and GTT.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix parameter documentation for amdgpu_vm_free_pts

The function was modified without updating the documentation.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add amdgpu_vm_entries_mask v2

We can't get the mask for the root directory from the number of entries.

So add a new function to avoid that problem.

v2: fix typo in mask

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: add LG eDP panel to quirk database

The N value was computed by kernel driver that based on synchronous clock
mode. But only specific N value (0x8000) would be acceptable for
LG LP140WF6-SPM1 eDP panel which is running at asynchronous clock mode.
With the other N value, Tcon will enter BITS mode and display black screen.
Add this panel into quirk database and give particular N value when
calculate M/N divider.

v2: no update
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-4-git-send-email-shawn.c.lee@intel.com

drm: Change limited M/N quirk to constant N quirk.

Some DP dongles in particular seem to be fussy about too large
link M/N values. Set specific value for N divider can resolve
this issue per dongle vendor's comment. So configure N as
constant value (0x8000) to instead of reduce M/N formula when
specific DP dongle connected.

v2: add more comments for issue description and fix typo.
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com

drm: Add support for device_id based detection.

DP quirk list just compare sink or branch device's OUI so far.
That means particular vendor's products will be applied specific
change. This change would confirm device_id the same or not.
Then driver can implement some changes for branch/sink device
that really need additional WA.

v2: use sizeof instead of hard coded '6'
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-2-git-send-email-shawn.c.lee@intel.com