Hans de Goede [Mon, 17 Dec 2018 14:19:03 +0000 (15:19 +0100)]
drm/i915: Update crtc scaler settings when update_pipe is set
When the pipe_config's update_pipe flag is set we may need to update the
panel fitting settings. On GEN9+ this means we need to update the crtc's
scaler settings.
This fixes the following WARN_ON, during i915 loading on an Asrock
B150M Pro4S/D3 board with an i5-6500 CPU / graphics:
[drm:pipe_config_err [i915]] *ERROR* mismatch in pch_pfit.enabled
(expected no, found yes)
pipe state doesn't match!
WARNING: CPU: 3 PID: 305 at drivers/gpu/drm/i915/intel_display.c:12084
With line 12084 being the I915_STATE_WARN call inside the
"if (!intel_pipe_config_compare())" block in verify_crtc_state().
On this board with 2 1920x1080 monitors connected over HDMI the GOP
initializes both monitors at 1920x1080 and despite no scaling being
necessary configures a scaler for one of them.
When booting with fastboot=1 on the initial modeset needs_modeset will
be false while update_pipe is true. Since we were not calling
skl_update_scaler_crtc() in this case we would leave the scaler enabled
causing this error.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217141903.4182-1-hdegoede@redhat.com
Anusha Srivatsa [Fri, 7 Dec 2018 18:28:39 +0000 (10:28 -0800)]
drm/i915/huc: Update the HuC version for BXT
We have an update for HuC for BXT.
Load the latest version.
v2: Change the subject.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207182840.9292-2-anusha.srivatsa@intel.com
Manasi Navare [Thu, 6 Dec 2018 00:54:07 +0000 (16:54 -0800)]
drm/i915/dsc: Add Per connector debugfs node for DSC support/enable
DSC can be supported per DP connector. This patch adds a per connector
debugfs node to expose DSC support capability by the kernel.
The same node can be used from userspace to force DSC enable.
force_dsc_en written through this debugfs node is used to force
DSC even for lower resolutions.
Credits to Ville Syrjala for suggesting the proper locks to be used
and to Lyude Paul for explaining how to use them in this context
v8:
* Add else if (ret) for drm_modeset_lock (Lyude)
v7:
* Get crtc, crtc_state from connector atomic state
and add proper locks and backoff (Ville, Chris Wilson, Lyude)
(Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>)
* Use %zu for printing size_t variable (Lyude)
v6:
* Read fec_capable only for non edp (Manasi)
v5:
* Name it dsc sink support and also add
fec support in the same node (Ville)
v4:
* Add missed connector_status check (Manasi)
* Create i915_dsc_support node only for Gen >=10 (manasi)
* Access intel_dp->dsc_dpcd only if its not NULL (Manasi)
v3:
* Combine Force_dsc_en with this patch (Ville)
v2:
* Use kstrtobool_from_user to avoid explicit error checking (Lyude)
* Rebase on drm-tip (Manasi)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206005407.4698-1-manasi.d.navare@intel.com
Chris Wilson [Thu, 13 Dec 2018 16:12:41 +0000 (16:12 +0000)]
drm/i915: Fix Cherryview oops on boot
Do not dereference the LUT blob before checking whether that blob
exists. Or else,
<1>[ 13.978684] BUG: unable to handle kernel NULL pointer dereference at
0000000000000048
<6>[ 13.978718] PGD 0 P4D 0
<4>[ 13.978733] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[ 13.978750] CPU: 0 PID: 282 Comm: modprobe Not tainted 4.20.0-rc5-CI-CI_DRM_5294+ #1
<4>[ 13.978773] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0058.2016.1102.1842 11/02/2016
<4>[ 13.978932] RIP: 0010:cherryview_load_csc_matrix+0x1e6/0x210 [i915]
<4>[ 13.978953] Code: 41 5c 41 5d e9 7b 83 aa e1 41 c1 e4 0d 48 83 bd 00 02 00 00 00 48 8b 85 10 02 00 00 45 89 e5 74 09 ba 01 00 00 00 31 c9 eb 9d <48> 8b 50 48 48 c1 ea 03 81 fa 00 01 00 00 75 07 31 d2 48 85 c0 75
<4>[ 13.979001] RSP: 0018:
ffffc9000026f840 EFLAGS:
00010246
<4>[ 13.979018] RAX:
0000000000000000 RBX:
ffff888165500000 RCX:
7885fe6200000000
<4>[ 13.979039] RDX:
0000000000000020 RSI:
ffff88816553a008 RDI:
ffff888165464a88
<4>[ 13.979060] RBP:
ffff888165464a88 R08:
000000000ed0e429 R09:
0000000000000001
<4>[ 13.979080] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000004000
<4>[ 13.979101] R13:
0000000000004000 R14:
ffff888165500000 R15:
ffff888165464a88
<4>[ 13.979122] FS:
00007fb69c4f3540(0000) GS:
ffff88817ba00000(0000) knlGS:
0000000000000000
<4>[ 13.979146] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4>[ 13.979163] CR2:
0000000000000048 CR3:
000000016d7fa000 CR4:
00000000001006f0
<4>[ 13.979184] Call Trace:
<4>[ 13.979302] intel_update_crtc+0x18f/0x2b0 [i915]
<4>[ 13.979421] intel_update_crtcs+0x49/0x60 [i915]
<4>[ 13.979538] intel_atomic_commit_tail+0x1ea/0xd70 [i915]
<4>[ 13.979657] ? intel_atomic_commit_ready+0x3f/0x50 [i915]
<4>[ 13.979762] ? __i915_sw_fence_complete+0x1a0/0x250 [i915]
<4>[ 13.979884] intel_atomic_commit+0x244/0x330 [i915]
<4>[ 13.980002] intel_initial_commit+0xb6/0x140 [i915]
<4>[ 13.980127] intel_modeset_init+0x7a1/0x1880 [i915]
<4>[ 13.980235] i915_driver_load+0xcbb/0x15c0 [i915]
<4>[ 13.980257] ? __pm_runtime_resume+0x4f/0x80
<4>[ 13.980277] ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4>[ 13.980296] ? lockdep_hardirqs_on+0xe0/0x1b0
<4>[ 13.980401] i915_pci_probe+0x29/0xa0 [i915]
<4>[ 13.980421] pci_device_probe+0xa1/0x130
<4>[ 13.980440] really_probe+0xf3/0x3e0
<4>[ 13.980456] driver_probe_device+0x10a/0x120
<4>[ 13.980474] __driver_attach+0xdb/0x100
<4>[ 13.980489] ? driver_probe_device+0x120/0x120
<4>[ 13.980505] ? driver_probe_device+0x120/0x120
<4>[ 13.980522] bus_for_each_dev+0x74/0xc0
<4>[ 13.980539] bus_add_driver+0x15f/0x250
<4>[ 13.980554] ? 0xffffffffa0348000
<4>[ 13.980568] driver_register+0x56/0xe0
<4>[ 13.980583] ? 0xffffffffa0348000
<4>[ 13.980597] do_one_initcall+0x58/0x2e0
<4>[ 13.980615] ? do_init_module+0x1d/0x1ea
<4>[ 13.980631] ? rcu_read_lock_sched_held+0x6f/0x80
<4>[ 13.980649] ? kmem_cache_alloc_trace+0x264/0x290
<4>[ 13.980668] do_init_module+0x56/0x1ea
<4>[ 13.980685] load_module+0x227a/0x29c0
<4>[ 13.980715] ? __se_sys_finit_module+0xd3/0xf0
<4>[ 13.980731] __se_sys_finit_module+0xd3/0xf0
<4>[ 13.980756] do_syscall_64+0x55/0x190
<4>[ 13.980772] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 13.980789] RIP: 0033:0x7fb69c019839
<4>[ 13.980804] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
<4>[ 13.980851] RSP: 002b:
00007ffdc112e3a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
<4>[ 13.980875] RAX:
ffffffffffffffda RBX:
000055c689fe0b30 RCX:
00007fb69c019839
<4>[ 13.980895] RDX:
0000000000000000 RSI:
000055c689a05d2e RDI:
0000000000000000
<4>[ 13.980916] RBP:
000055c689a05d2e R08:
0000000000000000 R09:
0000000000000000
<4>[ 13.980936] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
<4>[ 13.980957] R13:
000055c689fe0c60 R14:
0000000000040000 R15:
000055c689fe0b30
<4>[ 13.980986] Modules linked in: i915(+) snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm pinctrl_cherryview prime_numbers
<4>[ 13.981027] CR2:
0000000000000048
Fixes: 302da0cdf784 ("drm/i915: Use intel_ types more consistently for color management code (v2)")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109054
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213161241.3461-1-chris@chris-wilson.co.uk
Oscar Mateo [Thu, 13 Dec 2018 09:15:22 +0000 (09:15 +0000)]
drm/i915/icl: Mind the SFC units when resetting VD or VEBox engines
SFC (Scaler & Format Converter) units are shared between VD and VEBoxes.
They also happen to have separate reset bits. So, whenever we want to reset
one or more of the media engines, we have to make sure the SFCs do not
change owner in the process and, if this owner happens to be one of the
engines being reset, we need to reset the SFC as well.
This happens in 4 steps:
1) Tell the engine that a software reset is going to happen. The engine
will then try to force lock the SFC (if currently locked, it will
remain so; if currently unlocked, it will ignore this and all new lock
requests).
2) Poll the ack bit to make sure the hardware has received the forced
lock from the driver. Once this bit is set, it indicates SFC status
(lock or unlock) will not change anymore (until we tell the engine it
is safe to unlock again).
3) Check the usage bit to see if the SFC has ended up being locked to
the engine we want to reset. If this is the case, we have to reset
the SFC as well.
4) Unlock all the SFCs once the reset sequence is completed.
Obviously, if we are resetting the whole GPU, we don't have to worry
about all of this.
BSpec: 10989
BSpec: 10990
BSpec: 10954
BSpec: 10955
BSpec: 10956
BSpec: 19212
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213091522.2926-4-chris@chris-wilson.co.uk
Oscar Mateo [Thu, 13 Dec 2018 09:15:21 +0000 (09:15 +0000)]
drm/i915/icl: Record the valid VDBoxes with SFC capability
In Gen11, only even numbered "logical" VDBoxes are hooked up to an SFC
(Scaler & Format Converter) unit. We will use this information to decide
when the SFC units need to be reset.
BSpec: 20189
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213091522.2926-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 13 Dec 2018 09:15:20 +0000 (09:15 +0000)]
drm/i915/selftests: Verify we can perform resets from atomic context
We currently require that our per-engine reset can be called from any
context, even hardirq, and in the future wish to perform the device
reset without holding struct_mutex (which requires some lockless
shenanigans that demand the lowlevel intel_reset_gpu() be able to be
used in atomic context). Test that we meet the current requirements by
calling i915_reset_engine() from under various atomic contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213091522.2926-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 13 Dec 2018 09:15:19 +0000 (09:15 +0000)]
drm/i915/selftests: Check we can recover a wedged device
After declaring a terminally wedged device, we allow ourselves to
recover on the next GPU reset (manually triggered), or resume. Check
that resetting a wedged device does work.
v2: Add rpm (taken explicitly in the subtest in case we remove the outer
wakeref) and early warning to i915_reset() for missed wakerefs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213091522.2926-1-chris@chris-wilson.co.uk
Lucas De Marchi [Wed, 12 Dec 2018 18:10:44 +0000 (10:10 -0800)]
drm/i915: merge gen checks to use range
Instead of using IS_GEN() for consecutive gen checks, let's pass the
range to IS_GEN_RANGE(). By code inspection these were the ranges deemed
necessary for spatch:
@@
expression e;
@@
(
- IS_GEN(e, 3) || IS_GEN(e, 2)
+ IS_GEN_RANGE(e, 2, 3)
|
- IS_GEN(e, 3) || IS_GEN(e, 4)
+ IS_GEN_RANGE(e, 3, 4)
|
- IS_GEN(e, 5) || IS_GEN(e, 6)
+ IS_GEN_RANGE(e, 5, 6)
|
- IS_GEN(e, 6) || IS_GEN(e, 7)
+ IS_GEN_RANGE(e, 6, 7)
|
- IS_GEN(e, 7) || IS_GEN(e, 8)
+ IS_GEN_RANGE(e, 7, 8)
|
- IS_GEN(e, 8) || IS_GEN(e, 9)
+ IS_GEN_RANGE(e, 8, 9)
|
- IS_GEN(e, 10) || IS_GEN(e, 9)
+ IS_GEN_RANGE(e, 9, 10)
|
- IS_GEN(e, 9) || IS_GEN(e, 10)
+ IS_GEN_RANGE(e, 9, 10)
)
After conversion, checking we don't have any missing IS_GEN_RANGE() ||
IS_GEN() was also done.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-3-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 12 Dec 2018 18:10:43 +0000 (10:10 -0800)]
drm/i915: replace IS_GEN<N> with IS_GEN(..., N)
Define IS_GEN() similarly to our IS_GEN_RANGE(). but use gen instead of
gen_mask to do the comparison. Now callers can pass then gen as a parameter,
so we don't require one macro for each gen.
The following spatch was used to convert the users of these macros:
@@
expression e;
@@
(
- IS_GEN2(e)
+ IS_GEN(e, 2)
|
- IS_GEN3(e)
+ IS_GEN(e, 3)
|
- IS_GEN4(e)
+ IS_GEN(e, 4)
|
- IS_GEN5(e)
+ IS_GEN(e, 5)
|
- IS_GEN6(e)
+ IS_GEN(e, 6)
|
- IS_GEN7(e)
+ IS_GEN(e, 7)
|
- IS_GEN8(e)
+ IS_GEN(e, 8)
|
- IS_GEN9(e)
+ IS_GEN(e, 9)
|
- IS_GEN10(e)
+ IS_GEN(e, 10)
|
- IS_GEN11(e)
+ IS_GEN(e, 11)
)
v2: use IS_GEN rather than GT_GEN and compare to info.gen rather than
using the bitmask
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-2-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 12 Dec 2018 18:10:42 +0000 (10:10 -0800)]
drm/i915: Rename IS_GEN to IS_GEN_RANGE
RANGE makes it longer, but clearer. We are also going to add a macro to
check an individual gen, so add the _RANGE prefix here.
Diff generated with:
sed 's/IS_GEN(/IS_GEN_RANGE(/g' drivers/gpu/drm/i915/{*/,}*.{c,h} -i
v2: use IS_GEN rather than GT_GEN
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-1-lucas.demarchi@intel.com
Matt Roper [Wed, 12 Dec 2018 19:17:20 +0000 (11:17 -0800)]
drm/i915: Don't forget to reset blocks when testing lower wm levels
During DDB allocation, we try to distribute enough blocks for each plane
to hit the highest watermark level; if that fails, we retry each lower
level (which should require fewer blocks) until we find one that's
possible (or until the whole commit is rejected as impossible). We need
to reset our running block count when trying each lower level, otherwise
all lower levels will fail as well.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d8e8749802 ("drm/i915: Switch to level-based DDB allocation algorithm (v5)")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212191720.3706-1-matthew.d.roper@intel.com
Bob Paauwe [Tue, 11 Dec 2018 19:25:45 +0000 (11:25 -0800)]
drm/i915: DFSM pipe disable is valid from gen9 onwards (v2)
It's not just GEN9 platforms that allow for pipes to be disabled via
the DFSM register, but all later platforms as well.
v2: drop pointless parentheses (Ville)
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181211192545.140081-1-bob.j.paauwe@intel.com
Matt Roper [Tue, 11 Dec 2018 17:31:07 +0000 (09:31 -0800)]
drm/i915: Switch to level-based DDB allocation algorithm (v5)
The DDB allocation algorithm currently used by the driver grants each
plane a very small minimum allocation of DDB blocks and then divies up
all of the remaining blocks based on the percentage of the total data
rate that the plane makes up. It turns out that this proportional
allocation approach is overly-generous with the larger planes and can
leave very small planes wthout a big enough allocation to even hit their
level 0 watermark requirements (especially on APL, which has a smaller
DDB in general than other gen9 platforms). Or there can be situations
where the smallest planes hit a lower watermark level than they should
have been able to hit with a more equitable division of DDB blocks, thus
limiting the overall system sleep state that can be achieved.
The bspec now describes an alternate algorithm that can be used to
overcome these types of issues. With the new algorithm, we calculate
all plane watermark values for all wm levels first, then go back and
partition a pipe's DDB space second. The DDB allocation will calculate
what the highest watermark level that can be achieved on *all* active
planes, and then grant the blocks necessary to hit that level to each
plane. Any remaining blocks are then divided up proportionally
according to data rate, similar to the old algorithm.
There was a previous attempt to implement this algorithm a couple years
ago in
bb9d85f6e9d ("drm/i915/skl: New ddb allocation algorithm"), but
some regressions were reported, the patch was reverted, and nobody
ever got around to figuring out exactly where the bug was in that
version. Our watermark code has evolved significantly in the meantime,
but we're still getting bug reports caused by the unfair proportional
algorithm, so let's give this another shot.
v2:
- Make sure cursor allocation stays constant and fixed at the end of
the pipe allocation.
- Fix some watermark level iterators that weren't handling the max
level.
v3:
- Ensure we don't leave any DDB blocks unused by using DIV_ROUND_UP+min
to calculate the extra blocks for each plane. (Ville)
- Replace a while() loop with a for() loop to be more consistent with
surrounding code. (Ville)
- Clean unattainable watermark levels with memset rather than directly
clearing the member fields. Also do the same for the transition
watermark values if they can't be achieved. (Ville)
- Drop min_disp_buf_needed calculations in skl_compute_plane_wm() since
the results are no longer needed or used. (Ville)
- Drop skl_latency[0] != 0 sanity check; both watermark methods already
account for an invalid 0 latency by returning FP_16_16_MAX. (Ville)
v4:
- Break DDB allocation loop when total_data_rate=0 rather than
alloc_size=0. If total_data_rate has dropped to 0, all remaining
planes are disabled, which isn't true for alloc_size (we might just
have not had any remaining blocks to hand out). Plus
total_data_rate=0 is the case we need to avoid to a prevent a
div-by-0. (Ville)
- s/DIV_ROUND_UP/DIV64_U64_ROUND_UP/ to prevent 32-bit breakage (Ville)
v5:
- Don't forget to move 'start' pointer forward for UV surface when
setting plane DDB boundaries. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105458
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181211173107.11068-2-matthew.d.roper@intel.com
Matt Roper [Tue, 11 Dec 2018 17:31:06 +0000 (09:31 -0800)]
drm/i915: Don't use DDB allocation when choosing gen9 watermark method
The bspec gives an if/else chain for choosing whether to use "method 1"
or "method 2" for calculating the watermark "Selected Result Blocks"
value for a plane. One of the branches of the if chain is:
"Else If ('plane buffer allocation' is known and (plane buffer
allocation / plane blocks per line) >=1)"
Since our driver currently calculates DDB allocations first and the
actual watermark values second, the plane buffer allocation is known at
this point in our code and we include this test in our driver's logic.
However we plan to soon move to a "watermarks first, ddb allocation
second" sequence where we won't know the DDB allocation at this point.
Let's drop this arm of the if/else statement (effectively considering
the DDB allocation unknown) as an independent patch so that any
regressions can be more accurately bisected to either the different
watermark value (in this patch) or the new DDB allocation (in the next
patch).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181211173107.11068-1-matthew.d.roper@intel.com
Clint Taylor [Mon, 10 Dec 2018 22:52:54 +0000 (14:52 -0800)]
drm/i915/hdmi: SCDC Scrambling enable without CTS mode
Setting the SCDC scrambling CTS mode causes HDMI Link Layer protocol tests
HF1-12 and HF1-13 to fail.
V2: Removed "Source Shall" entries to a new patch
V3: Rebase to drm-tip
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107895
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107896
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1544482374-26507-1-git-send-email-clinton.a.taylor@intel.com
Matt Roper [Mon, 10 Dec 2018 21:54:15 +0000 (13:54 -0800)]
drm/i915: Use intel_ types more consistently for color management code (v2)
Try to be more consistent about intel_* types rather than drm_* types
for lower-level driver functions. While we're at it, let's also be more
consistent with state variable naming (half of the platforms use the
name 'state' whereas the other half used 'crtc_state').
While we're touching these variables, let's also be more consistent
about always naming the intel_crtc_state's "crtc_state" rather than
"state" so that different platform types aren't using different naming
conventions.
v2:
- s/state/crtc_state/ for consistency between platform types (Ville)
- Drop the crtc parameter to intel_color_check(); we can just pull that
out of the state object.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210215415.19854-2-matthew.d.roper@intel.com
Matt Roper [Mon, 10 Dec 2018 21:54:14 +0000 (13:54 -0800)]
drm/i915: Use intel_ types more consistently for watermark code (v2)
Try to be more consistent about intel_* types rather than drm_* types
for lower-level driver functions.
v2:
- Also drop the intel_crtc parameter from compute_intermediate_wm()
since we can just extract it from the crtc_state parameter. (Ville)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210215415.19854-1-matthew.d.roper@intel.com
Ville Syrjälä [Tue, 13 Nov 2018 17:23:30 +0000 (19:23 +0200)]
drm/i915: Remove dead update_wm_pre assignment from SKL wm code
SKL+ do not use crtc_state->update_wm_pre, so there is absolutely no
point it setting it. crtc_state->update_wm_pre only exists as a
temporary hack for pre-g4x platforms until we redo their
watermarks to be be atomic.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113172330.26069-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Tue, 13 Nov 2018 17:23:29 +0000 (19:23 +0200)]
drm/i915: Remove bogus FIXME from SKL wm computation
We do return an error when the watermark calculation fails, so
the FIXME claiming otherwise is outdated. Remove it.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113172330.26069-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Tue, 13 Nov 2018 17:23:28 +0000 (19:23 +0200)]
drm/i915: Use explicit old crtc state in skl_compute_wm()
skl_compute_wm() wants to compare the old and new watermarks. Currently
it gets at the old watermarks via crtc->state, which is confusing since
it can point at either the old or the new state depending on where
in the sequence we are. In this case it is correct since we have not yet
swapped the states, but let's make it super clear what this is doing
by using the explicit old state.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113172330.26069-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Fri, 7 Dec 2018 13:40:37 +0000 (13:40 +0000)]
drm/i915: Flush GPU relocs harder for gen3
Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3
was good, but still not good enough. To survive 24+ hours under test we
needed to perform not one, not two but three extra store-dw. Doing so
for each GPU relocation was a little unsightly and since we need to
worry about userspace hitting the same issues, we should apply the dummy
store-dw into the EMIT_FLUSH.
Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing")
References:
7fa28e146994 ("drm/i915: Write GPU relocs harder with gen3")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 7 Dec 2018 11:05:54 +0000 (11:05 +0000)]
drm/i915: Skip the ERR_PTR error state
Although commit
fb6f0b64e455 ("drm/i915: Prevent machine hang from
Broxton's vtd w/a and error capture") applied cleanly after a 24 month
hiatus, the code had moved on with new methods for peeking and fetching
the captured gpu info. Make sure we catch all uses of the stashed error
state and avoid dereferencing the error pointer.
v2: Move error pointer determination into i915_gpu_capture_state
v3: Restore early check to avoid capturing and then throwing away
subsequent GPU error states.
Fixes: fb6f0b64e455 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207110554.19897-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 7 Dec 2018 09:02:13 +0000 (09:02 +0000)]
drm/i915: Pipeline PDP updates for Braswell
Currently we face a severe problem on Braswell that manifests as invalid
ppGTT accesses. The code tries to maintain the PDP (page directory
pointers) inside the context in two ways, direct write into the context
and a pipelined LRI update. The direct write into the context is
fundamentally racy as it is unserialised with any access (read or write)
the GPU is doing. By asserting that Braswell is not used with vGPU
(currently an unsupported platform) we can eliminate the dangerous
direct write into the context image and solely use the pipelined update.
However, the LRI of the PDP fouls up the GPU, causing it to freeze and
take out the machine with "forcewake ack timeouts". This seems possible
to workaround by preventing the GPU from sleeping (via means of
disabling the power-state management interface, i.e. forcing each ring
to remain awake) around the update. Equally, it seems an EMIT_INVALIDATE
before the LRI is sufficient to prevent the forcewake errors.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656
References: https://bugs.freedesktop.org/show_bug.cgi?id=108714
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207090213.14352-3-chris@chris-wilson.co.uk
Chris Wilson [Fri, 7 Dec 2018 09:02:12 +0000 (09:02 +0000)]
drm/i915/ringbuffer: EMIT_INVALIDATE after switch context
The recommend procedure was to switch contexts (and mm) then invalidate
the TLBs. Make it so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207090213.14352-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 7 Dec 2018 09:02:11 +0000 (09:02 +0000)]
drm/i915: Push EMIT_INVALIDATE at request start to backends
Move the common engine->emit_flush(EMIT_INVALIDATE) back to the backends
(where it was once previously) as we seek to specialise it in future
patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207090213.14352-1-chris@chris-wilson.co.uk
Mika Kuoppala [Wed, 5 Dec 2018 13:46:12 +0000 (15:46 +0200)]
drm/i915/icl: Forcibly evict stale csb entries
Gen11 fails to deliver wrt global observation point on
tail/entry updates and we sometimes see old entry.
Use clflush to forcibly evict our possibly stale copy
of the cacheline in hopes that we get fresh one from gpu.
Obviously there is something amiss in the coherency protocol so
this can be consired as a workaround until real cause
is found.
The working hardware will do the evict without our cue anyways,
so the cost in there should be ameliorated by that fact.
v2: for next pass, s/flush/evict, add reset (Chris)
References: https://bugzilla.freedesktop.org/show_bug.cgi?id=108315
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205134612.24822-1-mika.kuoppala@linux.intel.com
Chris Wilson [Thu, 6 Dec 2018 08:44:31 +0000 (08:44 +0000)]
drm/i915/execlists: Apply a full mb before execution for Braswell
Braswell is really picky about having our writes posted to memory before
we execute or else the GPU may see stale values. A wmb() is insufficient
as it only ensures the writes are visible to other cores, we need a full
mb() to ensure the writes are in memory and visible to the GPU.
The most frequent failure in flushing before execution is that we see
stale PTE values and execute the wrong pages.
References:
987abd5c62f9 ("drm/i915/execlists: Force write serialisation into context image vs execution")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206084431.9805-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 6 Dec 2018 18:07:13 +0000 (18:07 +0000)]
drm/i915/execlists: Move RCS mmio workaround to new common wa_list
We can move the remaining RCS workarounds applied to only gen8 to the
engine->wa_list, and then reduce all engine->init_hw callbacks to common
code. The benefit of using the new wa_list is that we verify that the
registers are indeed restored and keep their magic values.
v2: INSTPM_FORCE_ORDERING is already part of gen8_ctx_workarounds, and
as confirmed by the mmio verification is a part of the context image!
v3: MI_MODE is already part of gen8_ctx_workarounds...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206180713.6827-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 6 Dec 2018 18:07:12 +0000 (18:07 +0000)]
drm/i915/selftests: verify_gt_engine_wa() needs rpm wakeref
The mmio readback for verify_gt_engine_wa() also needs a runtime-pm
wakeref, so effectively do the entirety of both engine workarounds
tests. As such simplify the rpm behaviour here by acquiring the wakeref
for the whole of each subtest. It would be still useful to later verify
the registers retain their magic values across rpm suspend/resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206180713.6827-1-chris@chris-wilson.co.uk
Ramalingam C [Wed, 5 Dec 2018 11:44:43 +0000 (17:14 +0530)]
drm/i915: Increase timeout for Encrypt status change
At enable/disable of the HDCP encryption, for encryption status change
we need minimum one frame duration. And we might program this bit any
point(start/End) in the previous frame.
With 20mSec, observed the timeout for change in encryption status.
Since this is not time critical operation and we need to hold on
until the status is changed, fixing the timeout to 50mSec. (Based on
trial and error method!)
v2:
%s/TIME_FOR_ENCRYPT_STATUS_CHANGE/ENCRYPT_STATUS_CHANGE_TIMEOUT_MS
[Sean Paul]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-5-git-send-email-ramalingam.c@intel.com
Ramalingam C [Wed, 5 Dec 2018 11:44:42 +0000 (17:14 +0530)]
drm/i915: debug log for REPLY_ACK missing
Adding a debug log when the DP_AUX_NATIVE_REPLY_ACK is missing
for aksv write. This helps to locate the possible non responding
DP HDCP sinks.
v2:
Rewritten for readability [Sean Paul]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-4-git-send-email-ramalingam.c@intel.com
Ramalingam C [Wed, 5 Dec 2018 11:44:41 +0000 (17:14 +0530)]
drm/i915: Fix platform coverage for HDCP1.4
HDCP1.4 is enabled and validated only on GEN9+ platforms.
v2:
Removed the unnecessary parens [Ville]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-3-git-send-email-ramalingam.c@intel.com
Ramalingam C [Wed, 5 Dec 2018 11:44:40 +0000 (17:14 +0530)]
drm/i915: Fix GEN9 HDCP1.4 key load process
HDCP1.4 key load process varies between Intel platform to platform.
For Gen9 platforms except BXT and GLK, HDCP1.4 key is loaded using
the GT Driver Mailbox interface. So all GEN9_BC platforms will use
the GT Driver Mailbox interface for HDCP1.4 key load.
v2:
Using the IS_GEN9_BC for filtering the platforms [Ville]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-2-git-send-email-ramalingam.c@intel.com
José Roberto de Souza [Wed, 5 Dec 2018 00:48:23 +0000 (16:48 -0800)]
drm/i915/fbc/cnl: Add GLK and CNL+ hardware tracking area
GLK and CNL+ supports a bigger FBC tracking area.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205004823.30823-1-jose.souza@intel.com
José Roberto de Souza [Wed, 5 Dec 2018 18:48:50 +0000 (10:48 -0800)]
drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
The DP_DPCD_QUIRK_NO_PSR comment is missing colon causing this
warning when generating kernel documentation.
./include/drm/drm_dp_helper.h:1374: warning: Incorrect use of kernel-doc format: * @DP_DPCD_QUIRK_NO_PSR
Fixes: 7c5c641a930e (drm/i915: Disable PSR in Apple panels)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205184850.13218-1-jose.souza@intel.com
Matt Atwood [Thu, 29 Nov 2018 22:00:58 +0000 (14:00 -0800)]
drm/i915: implement EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT
According to DP spec (2.9.3.1 of DP 1.4) if
EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT is set the addresses in DPCD
02200h through 0220Fh shall contain the DPRX's true capability. These
values will match 00000h through 0000Fh, except for DPCD_REV,
MAX_LINK_RATE, DOWN_STREAM_PORT_PRESENT.
Read from DPCD once for all 3 values as this is an expensive operation.
Spec mentions that all of address space 02200h through 0220Fh should
contain the right information however currently only 3 values can
differ.
There is no address space in the intel_dp->dpcd struct for addresses
02200h through 0220Fh, and since so much of the data is a identical,
simply overwrite the values stored in 00000h through 0000Fh with the
values that can be overwritten from addresses 02200h through 0220Fh.
This patch helps with backward compatibility for devices pre DP1.3.
v2: read only dpcd values which can be affected, remove incorrect check,
split into drm include changes into separate patch, commit message,
verbose debugging statements during overwrite.
v3: white space fixes
v4: make path dependent on DPCD revision > 1.2
v5: split into function, removed DPCD rev check
v6: add debugging prints for early exit conditions
v7 (From Manasi):
* Memcpy, memcmp and debig logging based on sizeof(dpcd_ext) (Jani N)
* Exit early (Jani N)
v8 (From Manasi):
* Get rid of superfluous debug prints (Jani N)
* Print entire base DPCD before memcpy (Jani N)
v9 (From Manasi):
* Add uniform newlines (Rodrigo)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129220058.19636-1-manasi.d.navare@intel.com
Pedro Tammela [Wed, 5 Dec 2018 11:06:08 +0000 (09:06 -0200)]
Makefile: fix mixed tab and spaces
Fixes a comestic issue where spaces were being used
instead of mixed tab and spaces.
Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205110608.5513-1-pctammela@gmail.com
José Roberto de Souza [Tue, 4 Dec 2018 00:34:03 +0000 (16:34 -0800)]
drm/i915/psr: Check if source supports sink specific SU granularity
According to eDP spec, sink can required specific selective update
granularity that source must comply.
Here caching the value if required and checking if source supports
it.
v3:
- Returning the default granularity in case DPCD read fails(Dhinakaran)
- Changed DPCD error message level(Dhinakaran)
v4:
- Setting granularity to defaul when granularity read is equal to
0(Dhinakaran)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-9-jose.souza@intel.com
José Roberto de Souza [Tue, 4 Dec 2018 00:34:02 +0000 (16:34 -0800)]
drm/i915/psr: Check if resolution is supported by default SU granularity
Selective updates have a default granularity requirements as stated
by eDP spec(PSR2 SELECTIVE UPDATE X GRANULARITY CAPABILITY register
definition), so check if HW can match those requirements before
enabling PSR2.
v3:
- Changes in the comments and commit message(Dhinakaran)
- Printing the hdisplay that do not match with default granularity
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-8-jose.souza@intel.com
José Roberto de Souza [Tue, 4 Dec 2018 00:34:01 +0000 (16:34 -0800)]
drm: Add the PSR SU granularity registers offsets
Source is required to comply to sink SU granularity when
DP_PSR2_SU_GRANULARITY_REQUIRED is set in DP_PSR_CAPS,
so adding the registers offsets.
v2: Also adding DP_PSR2_SU_Y_GRANULARITY(Rodrigo)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-7-jose.souza@intel.com
José Roberto de Souza [Tue, 4 Dec 2018 00:34:00 +0000 (16:34 -0800)]
drm/i915: Remove old PSR2 FIXME about frontbuffer tracking
Our frontbuffer tracking improved over the years + the WA #0884
helped us keep PSR2 enabled while triggering screen updates when
necessary so this FIXME is not valid anymore.
Acked-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-6-jose.souza@intel.com
José Roberto de Souza [Tue, 4 Dec 2018 00:33:59 +0000 (16:33 -0800)]
drm/i915/icl: Do not change reserved registers related to PSR2
For ICL the bit 12 of CHICKEN_TRANS is reserved so we should not
touch it and as by default VSC_DATA_SEL_SOFTWARE_CONTROL is already
unset in gen10 + GLK we can just drop it and fix for both gens.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-5-jose.souza@intel.com
José Roberto de Souza [Tue, 4 Dec 2018 00:33:58 +0000 (16:33 -0800)]
drm/i915/psr: Enable sink to trigger a interruption on PSR2 CRC mismatch
eDP spec states 2 different bits to enable sink to trigger a
interruption when there is a CRC mismatch.
DP_PSR_CRC_VERIFICATION is for PSR only and
DP_PSR_IRQ_HPD_WITH_CRC_ERRORS is for PSR2 only.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-4-jose.souza@intel.com
José Roberto de Souza [Tue, 4 Dec 2018 00:33:57 +0000 (16:33 -0800)]
drm/i915/psr: Set PSR CRC verification bit in sink inside PSR1 block
As we have a else block for the 'if (dev_priv->psr.psr2_enabled) {'
and this bit is only set for PSR1 move it to that block to make it
more easy to read.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-3-jose.souza@intel.com
José Roberto de Souza [Tue, 4 Dec 2018 00:33:56 +0000 (16:33 -0800)]
drm/i915/psr: Don't tell sink that main link will be active while is active PSR2
For PSR2 there is no register to tell HW to keep main link enabled
while PSR2 is active, so don't configure sink DPCD with a
misleading value.
v2: Moving the set of DP_PSR_CRC_VERIFICATION to the else block
of 'if (dev_priv->psr.psr2_enabled)' to another patch. (Rodrigo)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-2-jose.souza@intel.com
José Roberto de Souza [Tue, 4 Dec 2018 00:33:55 +0000 (16:33 -0800)]
drm/i915: Disable PSR in Apple panels
i915 yet don't support PSR in Apple panels, so lets keep it disabled
while we work on that.
v2: Renamed DP_DPCD_QUIRK_PSR_NOT_CURRENTLY_SUPPORTED to
DP_DPCD_QUIRK_NO_PSR (Ville)
v3:
Adding documentation to DP_DPCD_QUIRK_NO_PSR(Dhinakaran and Jani)
Fixed typo in comment of the new quirk entry(Jani)
Fixes: 598c6cfe0690 (drm/i915/psr: Enable PSR1 on gen-9+ HW)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-1-jose.souza@intel.com
Tvrtko Ursulin [Tue, 4 Dec 2018 17:15:30 +0000 (17:15 +0000)]
drm/i915: Dial down workaround debug messages
For selftests like live_hangcheck, which does thousands of reset per
second, it is too verbose to log every time we re-apply the workarounds.
Remove those messages since, coupled with the dedicated selftest, it is
sufficient to only log the number of recorded workarounds at init time.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204171530.28583-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Tue, 4 Dec 2018 14:15:18 +0000 (14:15 +0000)]
drm/i915/selftests: Reorder request allocation vs vma pinning
Impose a restraint that we have all vma pinned for a request prior to
its allocation. This is to simplify request construction, and should
facilitate unravelling the lock interdependencies later.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204141522.13640-3-chris@chris-wilson.co.uk
Jani Nikula [Tue, 4 Dec 2018 17:26:17 +0000 (19:26 +0200)]
drm/i915: Update DRIVER_DATE to
20181204
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Jani Nikula [Tue, 4 Dec 2018 10:19:26 +0000 (12:19 +0200)]
drm/i915/icl: fix transcoder state readout
Commit
2ca711caeca2 ("drm/i915/icl: Consider DSI for getting transcoder
state") clobbers the previously read TRANS_DDI_FUNC_CTL_EDP register
contents with TRANS_DDI_FUNC_CTL_DSI0 contents. Fix the state readout,
and handle DSI 1 while at it.
Use a bitmask for iterating and logging transcoders, because the allowed
combinations are a bit funky.
Fixes: 2ca711caeca2 ("drm/i915/icl: Consider DSI for getting transcoder state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108928
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204101926.17174-1-jani.nikula@intel.com
Chris Wilson [Tue, 4 Dec 2018 14:15:16 +0000 (14:15 +0000)]
drm/i915: Allocate a common scratch page
Currently we allocate a scratch page for each engine, but since we only
ever write into it for post-sync operations, it is not exposed to
userspace nor do we care for coherency. As we then do not care about its
contents, we can use one page for all, reducing our allocations and
avoid complications by not assuming per-engine isolation.
For later use, it simplifies engine initialisation (by removing the
allocation that required struct_mutex!) and means that we can always rely
on there being a scratch page.
v2: Check that we allocated a large enough scratch for I830 w/a
Fixes: 06e562e7f515 ("drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5") # v4.18.20
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108850
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204141522.13640-1-chris@chris-wilson.co.uk
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.18.20+
Tvrtko Ursulin [Mon, 3 Dec 2018 12:50:14 +0000 (12:50 +0000)]
drm/i915: Trim unused workaround list entries
The new workaround list allocator grows the list in chunks so will end up
with some unused space. Trim it when the initialization phase is done to
free up a tiny bit of slab.
v2:
* Simplify with kmemdup. (Chris Wilson)
v3:
* Refactor for __size removal.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203125014.3219-8-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Mon, 3 Dec 2018 13:33:57 +0000 (13:33 +0000)]
drm/i915: Fuse per-context workaround handling with the common framework
Convert the per context workaround handling code to run against the newly
introduced common workaround framework and fuse the two to use the
existing smarter list add helper, the one which does the sorted insert and
merges registers where possible.
This completes migration of all four classes of workarounds onto the
common framework.
Existing macros are kept untouched for smaller code churn.
v2:
* Rename to list name ctx_wa_list and move from dev_priv to engine.
v3:
* API rename and parameters tweaking. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203133357.10341-1-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Mon, 3 Dec 2018 12:50:12 +0000 (12:50 +0000)]
drm/i915: Move register white-listing to the common workaround framework
Instead of having a separate list of white-listed registers we can
trivially move this to the common workarounds framework.
This brings us one step closer to the goal of driving all workaround
classes using the same code.
v2:
* Use GEM_DEBUG_WARN_ON for the sanity check. (Chris Wilson)
v3:
* API rename. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203125014.3219-6-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Mon, 3 Dec 2018 12:50:11 +0000 (12:50 +0000)]
drm/i915/selftests: Add tests for GT and engine workaround verification
Two simple selftests which test that both GT and engine workarounds are
not lost after either a full GPU reset, or after the per-engine ones.
(Including checks that one engine reset is not affecting workarounds not
belonging to itself.)
v2:
* Rebase for series refactoring.
* Add spinner for actual engine reset!
* Add idle reset test as well. (Chris Wilson)
* Share existing global_reset_lock. (Chris Wilson)
v3:
* intel_engine_verify_workarounds can be static.
* API rename. (Chris Wilson)
* Move global reset lock out of the loop. (Chris Wilson)
v4:
* Add missing rpm puts. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203125014.3219-5-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Mon, 3 Dec 2018 12:50:10 +0000 (12:50 +0000)]
drm/i915: Verify GT workaround state after GPU init
Since we now have all the GT workarounds in a table, by adding a simple
shared helper function we can now verify that their values are still
applied after some interesting events in the lifetime of the driver.
Initially we only do this after GPU initialization.
v2:
Chris Wilson:
* Simplify verification by realizing it's a simple xor and and.
* Remove verification from engine reset path.
* Return bool straight away from the verify API.
v3:
* API rename. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203125014.3219-4-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Mon, 3 Dec 2018 13:33:41 +0000 (13:33 +0000)]
drm/i915: Introduce per-engine workarounds
We stopped re-applying the GT workarounds after engine reset since commit
59b449d5c82a ("drm/i915: Split out functions for different kinds of
workarounds").
Issue with this is that some of the GT workarounds live in the MMIO space
which gets lost during engine resets. So far the registers in 0x2xxx and
0xbxxx address range have been identified to be affected.
This losing of applied workarounds has obvious negative effects and can
even lead to hard system hangs (see the linked Bugzilla).
Rather than just restoring this re-application, because we have also
observed that it is not safe to just re-write all GT workarounds after
engine resets (GPU might be live and weird hardware states can happen),
we introduce a new class of per-engine workarounds and move only the
affected GT workarounds over.
Using the framework introduced in the previous patch, we therefore after
engine reset, re-apply only the workarounds living in the affected MMIO
address ranges.
v2:
* Move Wa_1406609255:icl to engine workarounds as well.
* Rename API. (Chris Wilson)
* Drop redundant IS_KABYLAKE. (Chris Wilson)
* Re-order engine wa/ init so latest platforms are first. (Rodrigo Vivi)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=107945
Fixes: 59b449d5c82a ("drm/i915: Split out functions for different kinds of workarounds")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203133341.10258-1-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Mon, 3 Dec 2018 13:33:19 +0000 (13:33 +0000)]
drm/i915: Record GT workarounds in a list
To enable later verification of GT workaround state at various stages of
driver lifetime, we record the list of applicable ones per platforms to a
list, from which they are also applied.
The added data structure is a simple array of register, mask and value
items, which is allocated on demand as workarounds are added to the list.
This is a temporary implementation which later in the series gets fused
with the existing per context workaround list handling. It is separated at
this stage since the following patch fixes a bug which needs to be as easy
to backport as possible.
Also, since in the following patch we will be adding a new class of
workarounds (per engine) which can be applied from interrupt context, we
straight away make the provision for safe read-modify-write cycle.
v2:
* Change dev_priv to i915 along the init path. (Chris Wilson)
* API rename. (Chris Wilson)
v3:
* Remove explicit list size tracking in favour of growing the allocation
in power of two chunks. (Chris Wilson)
v4:
Chris Wilson:
* Change wa_list_finish to early return.
* Copy workarounds using the compiler for static checking.
* Do not bother zeroing unused entries.
* Re-order struct i915_wa_list.
v5:
* kmalloc_array.
* Whitespace cleanup.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203133319.10174-1-tvrtko.ursulin@linux.intel.com
Jonathan Gray [Thu, 29 Nov 2018 01:30:51 +0000 (12:30 +1100)]
drm/i915: change i915_sw_fence license to MIT
Change the license of the i915_sw_fence files to MIT matching
most of the other i915 files. This makes it possible to use them
in a new port of i915 to OpenBSD.
Besides some mechanical tree wide changes Chris Wilson is the sole
author of these files with Intel holding the copyright.
Intel's legal team have given permission to change the license according
to Joonas Lahtinen.
v2: expand commit message and note permission from Intel legal
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129013051.17525-1-jsg@jsg.id.au
Chris Wilson [Mon, 3 Dec 2018 11:36:55 +0000 (11:36 +0000)]
drm/i915: Complete the fences as they are cancelled due to wedging
We inspect the requests under the assumption that they will be marked as
completed when they are removed from the queue. Currently however, in the
process of wedging the requests will be removed from the queue before they
are completed, so rearrange the code to complete the fences before the
locks are dropped.
<1>[ 354.473346] BUG: unable to handle kernel NULL pointer dereference at
0000000000000250
<6>[ 354.473363] PGD 0 P4D 0
<4>[ 354.473370] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[ 354.473380] CPU: 0 PID: 4470 Comm: gem_eio Tainted: G U 4.20.0-rc4-CI-CI_DRM_5216+ #1
<4>[ 354.473393] Hardware name: Intel Corporation NUC7CJYH/NUC7JYB, BIOS JYGLKCPX.86A.0027.2018.0125.1347 01/25/2018
<4>[ 354.473480] RIP: 0010:__i915_schedule+0x311/0x5e0 [i915]
<4>[ 354.473490] Code: 49 89 44 24 20 4d 89 4c 24 28 4d 89 29 44 39 b3 a0 04 00 00 7d 3a 41 8b 44 24 78 85 c0 74 13 48 8b 93 78 04 00 00 48 83 e2 fc <39> 82 50 02 00 00 79 1e 44 89 b3 a0 04 00 00 48 8d bb d0 03 00 00
<4>[ 354.473515] RSP: 0018:
ffffc900001bba90 EFLAGS:
00010046
<4>[ 354.473524] RAX:
0000000000000003 RBX:
ffff8882624c8008 RCX:
f34a737800000000
<4>[ 354.473535] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff8882624c8048
<4>[ 354.473545] RBP:
ffffc900001bbab0 R08:
000000005963f1f1 R09:
0000000000000000
<4>[ 354.473556] R10:
ffffc900001bba10 R11:
ffff8882624c8060 R12:
ffff88824fdd7b98
<4>[ 354.473567] R13:
ffff88824fdd7bb8 R14:
0000000000000001 R15:
ffff88824fdd7750
<4>[ 354.473578] FS:
00007f44b4b5b980(0000) GS:
ffff888277e00000(0000) knlGS:
0000000000000000
<4>[ 354.473590] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4>[ 354.473599] CR2:
0000000000000250 CR3:
000000026976e000 CR4:
0000000000340ef0
<4>[ 354.473611] Call Trace:
<4>[ 354.473622] ? lock_acquire+0xa6/0x1c0
<4>[ 354.473677] ? i915_schedule_bump_priority+0x57/0xd0 [i915]
<4>[ 354.473736] i915_schedule_bump_priority+0x72/0xd0 [i915]
<4>[ 354.473792] i915_request_wait+0x4db/0x840 [i915]
<4>[ 354.473804] ? get_pwq.isra.4+0x2c/0x50
<4>[ 354.473813] ? ___preempt_schedule+0x16/0x18
<4>[ 354.473824] ? wake_up_q+0x70/0x70
<4>[ 354.473831] ? wake_up_q+0x70/0x70
<4>[ 354.473882] ? gen6_rps_boost+0x118/0x120 [i915]
<4>[ 354.473936] i915_gem_object_wait_fence+0x8a/0x110 [i915]
<4>[ 354.473991] i915_gem_object_wait+0x113/0x500 [i915]
<4>[ 354.474047] i915_gem_wait_ioctl+0x11c/0x2f0 [i915]
<4>[ 354.474101] ? i915_gem_unset_wedged+0x210/0x210 [i915]
<4>[ 354.474113] drm_ioctl_kernel+0x81/0xf0
<4>[ 354.474123] drm_ioctl+0x2de/0x390
<4>[ 354.474175] ? i915_gem_unset_wedged+0x210/0x210 [i915]
<4>[ 354.474187] ? finish_task_switch+0x95/0x260
<4>[ 354.474197] ? lock_acquire+0xa6/0x1c0
<4>[ 354.474207] do_vfs_ioctl+0xa0/0x6e0
<4>[ 354.474217] ? __fget+0xfc/0x1e0
<4>[ 354.474225] ksys_ioctl+0x35/0x60
<4>[ 354.474233] __x64_sys_ioctl+0x11/0x20
<4>[ 354.474241] do_syscall_64+0x55/0x190
<4>[ 354.474251] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 354.474260] RIP: 0033:0x7f44b3de65d7
<4>[ 354.474267] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48
<4>[ 354.474293] RSP: 002b:
00007fff974948e8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
<4>[ 354.474305] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f44b3de65d7
<4>[ 354.474316] RDX:
00007fff97494940 RSI:
00000000c010646c RDI:
0000000000000007
<4>[ 354.474327] RBP:
00007fff97494940 R08:
0000000000000000 R09:
00007f44b40bbc40
<4>[ 354.474337] R10:
0000000000000000 R11:
0000000000000246 R12:
00000000c010646c
<4>[ 354.474348] R13:
0000000000000007 R14:
0000000000000000 R15:
0000000000000000
v2: Avoid floating requests.
v3: Can't call dma_fence_signal() under the timeline lock!
v4: Can't call dma_fence_signal() from inside another fence either.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203113701.12106-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 20 Nov 2018 20:24:39 +0000 (20:24 +0000)]
drm/i915/dp: Fix inconsistent indenting
Always show the FEC capability as it is initialised to 0 before error.
Fixing,
drivers/gpu/drm/i915/intel_dp.c:3846 intel_dp_get_dsc_sink_cap() warn: inconsistent indenting
Fixes: 08cadae8e157 ("i915/dp/fec: Cache the FEC_CAPABLE DPCD register")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120202439.13017-2-chris@chris-wilson.co.uk
José Roberto de Souza [Fri, 30 Nov 2018 23:20:48 +0000 (15:20 -0800)]
drm/i915: Move display device info capabilities to its own struct
This helps separate what capabilities are display capabilities.
v3: Moving display struct right after flags (Lucas)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130232048.14216-2-jose.souza@intel.com
José Roberto de Souza [Fri, 30 Nov 2018 23:20:47 +0000 (15:20 -0800)]
drm/i915: Add HAS_DISPLAY() and use it
Right now it is decided if GEN has display by checking the num_pipes,
so lets make it explicit and use a macro.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130232048.14216-1-jose.souza@intel.com
Manasi Navare [Sat, 1 Dec 2018 01:04:12 +0000 (17:04 -0800)]
drm/i915/dp: Fix link compute m_n calc for DSC
Fix the intel_link_compute_m_n in case of display stream
compression. This patch passes the compressed_bpp to
intel_link_compute_m_n if compression is enabled.
Fixes: a4a157777c80 ("drm/i915/dp: Compute DSC pipe config in atomic check")
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201010412.32372-1-manasi.d.navare@intel.com
Jani Nikula [Thu, 4 Oct 2018 14:37:50 +0000 (17:37 +0300)]
drm/i915/sysfs: make attrs arrays const
They don't need to be modified.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004143750.30880-2-jani.nikula@intel.com
Jani Nikula [Thu, 4 Oct 2018 14:37:49 +0000 (17:37 +0300)]
sysfs: constify sysfs create/remove files harder
Let the passed in array be const (and thus placed in rodata) instead of
a mutable array of const pointers.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004143750.30880-1-jani.nikula@intel.com
Chris Wilson [Fri, 30 Nov 2018 12:59:54 +0000 (12:59 +0000)]
drm/i915/vgpu: Disallow loading on old vGPU hosts
Since commit
fd8526e50902 ("drm/i915/execlists: Trust the CSB") we
actually broke the force-mmio mode for our execlists implementation. No
one noticed, so ergo no one is actually using an old vGPU host (where we
required the older method) and so can simply remove the broken support.
v2: csb_read can go as well (Mika)
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: fd8526e50902 ("drm/i915/execlists: Trust the CSB")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130125954.11924-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 3 Dec 2018 11:36:54 +0000 (11:36 +0000)]
drm/i915/breadcrumbs: Reduce missed-breadcrumb false positive rate
Change the on-cpu check to on-runqueue to catch if the waiter has been
woken (and reset its current_state back to TASK_UNINTERRUPTIBLE to
perform the seqno check) but is sleeping due to being preempted off the
cpu.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203113701.12106-1-chris@chris-wilson.co.uk
Jani Nikula [Mon, 3 Dec 2018 09:43:26 +0000 (11:43 +0200)]
drm/i915/icl: add pll mapping for DSI
Add encoder specific pll mapping for DSI. The differences with the DDI
version are big enough to warrant a separate function.
v2: add posting read (Madhav)
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203094326.28294-1-jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:34 +0000 (16:12 +0200)]
drm/i915/icl: Ungate DSI clocks
Ungate the clocks on the selected port.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2a01b3158feda624f98581b780854fe3df8c328d.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:33 +0000 (16:12 +0200)]
drm/i915/icl: Gate clocks for DSI
As per BSPEC, depending on the DSI transcoder being used,
DDI clock for the associated port should be gated. This
patch does the same.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e032bc3d8fff91b8c2631c73121268214615a7e8.1543500286.git.jani.nikula@intel.com
Jani Nikula [Thu, 29 Nov 2018 14:12:32 +0000 (16:12 +0200)]
drm/i915/icl: add dummy DSI GPIO element execution function
Add dummy debug logging GPIO element execution function for ICL.
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f59009ea0a0ebc489a5ec66f387d9dcf7264141f.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:31 +0000 (16:12 +0200)]
drm/i915/icl: Define display GPIO pins for DSI
Display Pins are the only GPIOs that need to be used by
driver for DSI panels. So driver should now have its own
implementation to toggle these pins based on GPIO info
received from VBT sequences.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e7e3bb05d4f48b1876169a69f495bcf6d511fda5.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:30 +0000 (16:12 +0200)]
drm/i915/icl: Define Panel power ctrl register
There are two panel power sequencers. Each register
has two addressable instances. This patch defines
both the instances of Panel power control register
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/99bb687b17a9165527a6210a79271c8175c8a4e3.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:29 +0000 (16:12 +0200)]
drm/i915/icl: Define missing bitfield for shortplug reg
This patch define missing bitfield for shortplug ctl ddi
register which will be used for ICL DSI GPIO programming.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b9feb75eb6c303556b91c8a23c505a4593a99a1.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:28 +0000 (16:12 +0200)]
drm/i915/icl: Get pipe timings for DSI
Transcoder timings for Gen11 DSI encoder
is available at pipe level unlike in older platform
where port specific registers need to be accessed.
v2 by Jani:
- get timings for (!dsi || icl) instead of (dsi && icl).
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f60e0c1aee08248e758da3219d3239898b43ba41.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:27 +0000 (16:12 +0200)]
drm/i915/icl: Consider DSI for getting transcoder state
For Gen11 DSI, we use similar registers like for eDP
to find if DSI encoder is connected or not to a pipe.
This patch refactors existing hsw_get_transcoder_state()
to handle this.
v2 by Jani:
- Add WARN_ON(dsi && edp) (Ville)
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e10b977dfc7aa985a8559d6cd59ed0981848e95.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:26 +0000 (16:12 +0200)]
drm/i915/icl: Configure DSI Dual link mode
This patch configures DSI video mode dual link by
programming DSS_CTL registers.
v2: Use new bitfield definitions from Anusha's patch
Correct register to be programmed and use max
depth buffer value (James)
v3 by Jani:
- checkpatch fixes
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d8962f4e1beffc2099b8bef8cb5a5191aa1d9efd.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:25 +0000 (16:12 +0200)]
drm/i915/icl: Add DSI encoder compute config hook
This patch implements compute config for Gen11 DSI encoder which is
required at the time of modeset.
For DSI 8X clock is AFE clock which is 5 times port clock.
v2 by Jani:
- drop the enable nop hook
- fixed_mode is always true
- HAS_GMCH_DISPLAY() is always false
v3 by Jani:
- set encoder->compute_config dropped during rebase
v4 by Jani:
- squash Vandita's port clock patch
- remove todo comment
Co-developed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a21574173caa5e2932d9e3c537b0931097ab5ac2.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:24 +0000 (16:12 +0200)]
drm/i915/icl: Get HW state for DSI encoder
This patch read out the current hw state for DSI and
return true if encoder is active.
v2 by Jani:
- Squash connector get hw state hook here
- Squash encode get hw state fix here
v3 by Jani:
- Add encoder->get_power_domains() (Imre)
v4 by Jani:
- Make encoder->get_power_domains() sensible... (Imre)
v5 by Jani:
- Power domains are bit positions, not bits (Stan, Imre)
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec6da32a55b9fb045527f14e41ed3dce86d46a97.1543500286.git.jani.nikula@intel.com
Vandita Kulkarni [Thu, 29 Nov 2018 14:12:23 +0000 (16:12 +0200)]
drm/i915/icl: Add get config functionality for DSI
This patch implements the functionality for getting PIPE configuration
to which DSI encoder is connected. Use the same method to get port clock
like other DDI encoders. Used during the atomic modeset.
v2 by Jani:
- Squash Madhav's and Vandita's get config bits together
- Move cnl_calc_wrpll_link() to intel_drv.h
- Drop extra temp variables
- Use enc_to_intel_dsi() instead of open coding
Co-developed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f21fa4258068d04582f2bf30735e5536a8043bdf.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:22 +0000 (16:12 +0200)]
drm/i915/icl: Allocate DSI hosts and imlement host transfer
Allocate DSI host structure for each DSI port available on gen11 and
register them with DSI fwk of DRM. Some of the DSI host operations are
also registered as part of this.
Retrieves DSI pkt (from DSI msg) to be sent over DSI link using DRM DSI
exported functions. A wrapper function is also added as "DSI host
transfer" for sending DSI data/cmd. Add DSI packet payload to command
payload queue using credit based mechanism for *long* packets.
v2 by Jani:
- indentation
- Use the new credit available helper
- Use int for free_credits
- Add intel_dsi local variable for better code flow
- Use the new credit available helper
- Use int for free_credits, i, and j
v3 by Jani:
- Squash DSI host allocation and transfer patches together
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/af4f168ed8737d44687d8b6f21ecaa7e805eb695.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:21 +0000 (16:12 +0200)]
drm/i915/icl: Fill DSI ports info
This patch fills backlight, CABC and general port
info for Gen11 DSI.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48c9f867d61a60dc7c2ce744ac2325655652c55f.1543500286.git.jani.nikula@intel.com
Vandita Kulkarni [Thu, 29 Nov 2018 14:12:20 +0000 (16:12 +0200)]
drm/i915/icl: Use the same pll functions for dsi
The same pll manager functions can be used to enable dpll for
mipi. Hence enabling the IO power and esc clock as part of pre pll
enable call.
v2 by Jani:
- fix function parameter indent (Madhav)
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07db5b1ce59c00295fad8a8e81908d59d8d76915.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:19 +0000 (16:12 +0200)]
drm/i915/icl: Allocate DSI encoder/connector
This patch allocates memory for DSI encoder and connector
which will be used for various DSI encoder/connector operations
and attaching the same to DRM subsystem. This patch also extracts
DSI modes info from VBT and save the desired mode info to connector.
v2 by Jani:
- Drop GEN11 prefix from encoder name
- Drop extra parenthesis
- Drop extra local variable
- Squash encoder power domain here
v3 by Jani:
- Squash connector and connector helper functions here
- Move intel_dsi_vbt_init call here
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0197023b92ffa2d59064e30fd4ca22b6a4cff16c.1543500286.git.jani.nikula@intel.com
Madhav Chauhan [Thu, 29 Nov 2018 14:12:18 +0000 (16:12 +0200)]
drm/i915/icl: Calculate DPLL params for DSI
This patch calculates various DPLL dividers and
parameters for DSI encoder and adjust AFE clock
for DSI. For DSI, 8x clock is AFE clock.
v2: Extend haswell_crtc_compute_clock() for Gen11 DSI
v3: Rebase
v4: use port clock instead of bitrate.
v5: Reabse and remove divide by 5
v6 by Jani:
- Fix indent (Madhav)
- Fix dpll state calc for EDP and DP MST
Co-developed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/525d41d0d893dcdc8874d2ce70afa226227ea3f4.1543500285.git.jani.nikula@intel.com
Imre Deak [Thu, 29 Nov 2018 14:12:17 +0000 (16:12 +0200)]
drm/i915/icl: Sanitize DDI port clock gating for DSI ports
The requirement for the DDI port clock gating for a port in DSI mode is
the opposite wrt. the case when the port is in DDI mode: the clock
should be gated when the port is active and ungated when the port is
inactive. Note that we cannot simply keep the DDI clock gated when the
port will be only used in DSI mode: it must be gated/ungated at a
specific spot in the DSI enable/disable sequence.
Ensure the above for all ports of a DSI encoder, also adding a sanity
check that we haven't registered another encoder using the same port
(VBT should never allow this to happen).
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ceb14d5a68e8e23988d923d4290a4f981789e616.1543500285.git.jani.nikula@intel.com
Jani Nikula [Thu, 29 Nov 2018 14:12:16 +0000 (16:12 +0200)]
drm/i915/icl: push pll to port mapping/unmapping to ddi encoder hooks
Unclutter the haswell_crtc_enable() and haswell_crtc_disable() functions
a bit by moving the pll to port mapping and unmapping functions to the
ddi encoder hooks. This allows removal of a bunch of boilerplate code
from the functions.
Additionally, the ICL DSI encoder needs to do the clock gating and
ungating slightly differently, and this allows its own handling in a
clean fashion.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f8e2982ceea4c05dc254a0c15e2b3be1d5f271d3.1543500285.git.jani.nikula@intel.com
Chris Wilson [Mon, 3 Dec 2018 11:36:59 +0000 (11:36 +0000)]
drm/i915/selftests: Terminate hangcheck sanitycheck forcibly
If all else fails and we are stuck eternally waiting for the undying
request, abandon all hope.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203113701.12106-6-chris@chris-wilson.co.uk
Chris Wilson [Mon, 3 Dec 2018 11:36:56 +0000 (11:36 +0000)]
drm/i915/ringbuffer: Clear semaphore sync registers on ring init
Ensure that the sync registers are cleared every time we restart the
ring to avoid stale values from creeping in from random neutrinos.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108888
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203113701.12106-3-chris@chris-wilson.co.uk
José Roberto de Souza [Wed, 28 Nov 2018 07:28:38 +0000 (23:28 -0800)]
drm/i915/psr: Get pipe id following atomic guidelines
As stated in struct drm_encoder, crtc field should only be used
by non-atomic drivers.
So here caching the pipe id in intel_psr_enable() what is way more
simple and efficient than at every call to
intel_psr_flush()/invalidate() get the
drm.mode_config.connection_mutex lock to safely be able to get the
pipe id by reading drm_connector_state.crtc.
This should fix the null pointer dereference crash below as the
previous way to get the pipe id was prone to race conditions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105959
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128072838.22773-1-jose.souza@intel.com
Tvrtko Ursulin [Fri, 30 Nov 2018 09:52:11 +0000 (09:52 +0000)]
drm/i915/selftests: Fix live_workarounds to actually do resets
The test was missing some magic ingredients to actually trigger the
resets.
In case of the full reset we need the I915_RESET_HANDOFF flag set, and in
case of engine reset we need a busy request.
Thanks to Chris for helping with reset magic.
v2:
* Grab RPM ref over reset.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130095211.23849-1-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Fri, 30 Nov 2018 08:02:53 +0000 (08:02 +0000)]
drm/i915/selftests: Extract spinner code
Pull out spinner code to a standalone file to enable it to be shortly used
by other and new test cases.
Plain code movement - no functional changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130080254.15383-1-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 29 Nov 2018 13:46:30 +0000 (13:46 +0000)]
drm/i915/icl: Remove Wa_1604302699
It seems that the documentation does not reference this any more, plus,
bit 28 does not stick when written to the register.
Therefore I can only assume this is something which was documented in the
past but got removed from the hardware in the meantime.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129134630.8222-1-tvrtko.ursulin@linux.intel.com
Tvrtko Ursulin [Thu, 29 Nov 2018 13:41:28 +0000 (13:41 +0000)]
drm/i915: Remove whitelist application from ringbuffer backend
There is no white-listing before Gen8 and after the removal ringbuffer
support for these platforms we can remove the call to this no-op.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129134128.7994-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Thu, 29 Nov 2018 21:05:43 +0000 (21:05 +0000)]
drm/i915: Fixup stub definitions for intel_opregion_suspend|resume
248 "multiple definition of ...". E.g.:
LD [M] drivers/gpu/drm/i915/i915.o
ld: drivers/gpu/drm/i915/i915_irq.o: in function `intel_opregion_resume':
i915_irq.c:(.text+0x58f0): multiple definition of `intel_opregion_resume';
drivers/gpu/drm/i915/i915_drv.o:i915_drv.c:(.text+0x2d40): first defined here
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a950adc6c343 ("drm/i915: Stop calling intel_opregion unregister/register in suspend/resume")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build tested
Link: https://patchwork.freedesktop.org/patch/msgid/20181129210543.31555-1-chris@chris-wilson.co.uk
Anusha Srivatsa [Wed, 28 Nov 2018 20:26:28 +0000 (12:26 -0800)]
drm/i915/fec: Disable FEC state.
Set the suitable bits in DP_TP_CTL to stop
bit correction when DSC is disabled.
v2:
- rebased.
- Add additional check for compression state. (Gaurav)
v3: rebased.
v4:
- Move the code to the proper spot according to spec (Ville)
- Use proper checks (manasi)
v5: Remove unnecessary checks (Ville)
v6: Resolve warnings. Add crtc_state as an argument to
intel_disable_ddi_buf(). (Manasi)
Cc: dri-devel@lists.freedesktop.org
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-17-manasi.d.navare@intel.com
Anusha Srivatsa [Wed, 28 Nov 2018 20:26:27 +0000 (12:26 -0800)]
i915/dp/fec: Configure the Forward Error Correction bits.
If FEC is supported, the corresponding
DP_TP_CTL register bits have to be configured.
The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register
and wait till FEC_STATUS in DP_TP_CTL[28] is 1.
Also add the warn message to make sure that the control
register is already active while enabling FEC.
v2:
- Change commit message. Configure fec state after
link training (Manasi, Gaurav)
- Remove redundent checks (Manasi)
- Remove the registers that get added automagically (Anusha)
v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav)
v4: rebased.
v5:
- Move the code to the proper spot, according to spec.(Ville)
- Use fec state as a check too.
v6: Pass intel_encoder, instead of intel_dp. (Ville)
v7: Remove unwanted comments (Manasi)
Cc: dri-devel@lists.freedesktop.org
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-16-manasi.d.navare@intel.com
Anusha Srivatsa [Wed, 28 Nov 2018 20:26:26 +0000 (12:26 -0800)]
drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION
If the panel supports FEC, the driver has to
set the FEC_READY bit in the dpcd register:
FEC_CONFIGURATION.
This has to happen before link training.
v2: s/intel_dp_set_fec_ready/intel_dp_sink_set_fec_ready
- change commit message. (Gaurav)
v3: rebased. (r-b Manasi)
v4: Use fec crtc state, before setting FEC_READY
bit. (Anusha)
v5: Move to intel_ddi.c
- Make the function static (Anusha)
v6: Dont pass state as a separate argument (Ville)
v7: (From Manasi)
* Correct the debug print (Ville)
Cc: dri-devel@lists.freedesktop.org
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-15-manasi.d.navare@intel.com
projects / openwrt / staging / blogic.git / log