Álvaro Fernández Rojas [Mon, 24 Apr 2023 18:13:13 +0000 (20:13 +0200)]
kernel: ssb: fallback-sprom: drop mac leftovers
This was left behind when removing the MAC extractions from PCI SPROMs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Mon, 24 Apr 2023 18:10:48 +0000 (20:10 +0200)]
kernel: ssb: fallback-sprom: optimize struct data
- Remove unneeded mac bytes from struct (it's already present in the SPROM).
- Convert devid_override to boolean.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Mon, 24 Apr 2023 18:06:49 +0000 (20:06 +0200)]
kernel: bcma: fallback-sprom: optimize struct data
- Remove unneeded mac bytes from struct (it's already present in the SPROM).
- Convert devid_override to boolean.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Nick Hainke [Sat, 16 Jul 2022 08:33:24 +0000 (10:33 +0200)]
ipq40xx: convert GL-AP1300 to DSA
Convert GL-AP1300 to DSA and enable it.
While working on it rename the GL-AP1300 leds from green to white.
Tested-by: Rob White <rob@blue-wave.net>
Tested-by: Robert Sommer <frauhottelmann@gmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Martin Kennedy [Thu, 20 Apr 2023 21:58:21 +0000 (17:58 -0400)]
ath79: create APBoot-compatible image for Aruba AP-175
As was done in commit
e11d00d44c66 ("ath79: create Aruba AP-105 APBoot
compatible image"), alter the Aruba AP-175 image generation process so
OpenWrt can be loaded with the vendor Aruba APBoot. Since the
remainder of the explanation and installation process is identical,
continuing the quote from that commit:
This works by prepending the OpenWrt LZMA loader to the uImage and
jumping directly to the loader. Aruba does not offer bootm on these
boards.
This approach keeps compatibility to devices which had their U-Boot
replaced. Both bootloaders can boot the same image.
With this patch, new installations do not require replacing the
bootloader and can be performed from the serial console without
opening the case.
Installation
------------
1. Attach to the serial console of the AP-175.
Interrupt autoboot and change the U-Boot env.
$ setenv apb_rb_openwrt "setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66;
netget 0x84000000 ap175.bin; go 0x84000040"
$ setenv apb_fb_openwrt "cp.b 0xbf040000 0x84000000 0x10000;
go 0x84000040"
$ setenv bootcmd "run apb_fb_openwrt"
$ saveenv
2. Load the OpenWrt initramfs image on the device using TFTP.
Place the initramfs image as "ap175.bin" in the TFTP server
root directory, connect it to the AP and make the server reachable
at 192.168.1.66/24.
$ run apb_rb_openwrt
3. Once OpenWrt booted, transfer the sysupgrade image to the device
using scp and use sysupgrade to install the firmware.
Signed-off-by: Martin Kennedy <hurricos@gmail.com>
Daniel Golle [Sun, 23 Apr 2023 17:46:02 +0000 (18:46 +0100)]
kernel: net: phy: realtek: fix NULL pointer dereference
The previous attempt to replace an open coded paged read in the RealTek
Ethernet PHY driver was too naive and resulted in breaking the r8169
PCIe Ethernet driver which also makes use of the RealTek Ethernet PHY
driver.
Fix this by instead of using the (not yet populated) paged operations
rather use rtl821x_write_page and protect the whole paged read operation
using the MDIO bus mutex.
Fixes: 998b973157 ("kernel: net: phy: realtek: improve RealTek 2.5G PHY driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Sebastian Schaper [Sun, 23 Apr 2023 13:40:34 +0000 (15:40 +0200)]
ramips: fix green LED for D-Link DAP-X1860
It was found this device uses a single tri-color power/status LED
rather than individual red/orange LEDs, which also supports green.
Add GPIO for green color and use with `boot` and `running` aliases.
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Felix Baumann [Fri, 21 Apr 2023 01:07:58 +0000 (03:07 +0200)]
ramips: Cudy X6 fixes / improvements
- Correct WiFi MACs, they didn't match oem firmware
- Move nvmem-cells to bdinfo partition and remove &bdinfo reference
- Add OEM device model name R13 to SUPPORTED_DEVICES
This allows sysupgrading from Cudy's OpenWrt fork without force
- Label red_led and use it during failsafe mode and upgrades
MAC addresses as verified by OEM firmware:
use address source
LAN b4:4b:d6:2d:c8:4a label
WAN b4:4b:d6:2d:c8:4b label + 1
2g b4:4b:d6:2d:c8:4a label
5g b6:4b:d6:3d:c8:4a label + LA-Bit set + 4th oktet increased
The label MAC address is found in bdinfo 0xde00.
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
[read wifi mac from flash offset]
Signed-off-by: David Bauer <mail@david-bauer.net>
Andreas Böhler [Sat, 1 Apr 2023 19:57:22 +0000 (21:57 +0200)]
ath79: add support for Alcatel HH40V
The Alcatel HH40V is a CAT4 LTE router used by various ISPs.
Specifications
==============
SoC: QCA9531 650MHz
RAM: 128MiB
Flash: 32MiB SPI NOR
LAN: 1x 10/100MBit
WAN: 1x 10/100MBit
LTE: MDM9607 USB 2.0 (rndis configuration)
WiFi: 802.11n (SoC integrated)
MAC address assignment
======================
There are three MAC addresses stored in the flash ROM, the assignment
follows stock. The MAC on the label is the WiFi MAC address.
Installation (TFTP)
===================
1. Connect serial console
2. Configure static IP to 192.168.1.112
3. Put OpenWrt factory.bin file as firmware-system.bin
4. Press Power + WPS and plug in power
5. Keep buttons pressed until TFTP requests are visible
6. Wait for the system to finish flashing and wait for reboot
7. Bootup will fail as the kernel offset is wrong
8. Run "setenv bootcmd bootm 0x9f150000"
9. Reset board and enjoy OpenWrt
Installation (without UART)
===========================
Installation without UART is a bit tricky and requires several steps too
long for the commit message. Basic steps:
1. Create configure backup
2. Patch backup file to enable SSH
3. Login via SSH and configure the new bootcmd
3. Flash OpenWrt factory.bin image manually (sysupgrade doesn't work)
More detailed instructions will be provided on the Wiki page.
Tested by: Christian Heuff <christian@heuff.at>
Signed-off-by: Andreas Böhler <dev@aboehler.at>
Tony Ambardar [Mon, 16 Jan 2023 11:18:00 +0000 (03:18 -0800)]
ath79: use gpios for switch management in WZR-HP-G300NH variants
The RTL8366S/RB switch node in DTS defines "mii-bus = <&mdio0>" to permit
management via SMI but this has likely never worked, instead falling back
to using GPIOs in the past:
rtl8366s switch: cannot find mdio bus from bus handle (yet)
rtl8366s switch: using GPIO pins 19 (SDA) and 20 (SCK)
rtl8366s switch: RTL8366 ver. 1 chip found
Recently, the rtl8366s and rtl8366_smi drivers were changed from built-in
to loadable modules. This affected driver probing order and caused switch
initialization (and network access) to fail:
rtl8366s switch: using MDIO bus 'ag71xx_mdio'
rtl8366s switch: unknown chip id (ffff)
rtl8366s switch: chip detection failed, err=-19
Force using GPIOs to manage the switch by dropping the "mii-bus" DTS
definition, which works for both built-in and loadable switch drivers.
Fixes: 6e0f0eae5b ("ath79: use rtl8366s and rtl8366_smi as a module")
Fixes: 575ec7a4b1 ("ath79: use rtl8366rb as a module")
Tested-by: Tony Ambardar <itugrok@yahoo.com> # WZR-HP-G300NH (RTL8366S)
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Fri, 13 Jan 2023 11:17:54 +0000 (03:17 -0800)]
ath79: fix switch support for WZR-HP-G300NH devices
Switch drivers for RTL8366S/RB were packaged as modules but not properly
added to device definitions for WZR-HP-G300NH router variants, breaking
network access to both after installation or upgrade.
Assign the correct switch driver package for each router.
Fixes: 6e0f0eae5b ("ath79: use rtl8366s and rtl8366_smi as a module")
Fixes: 575ec7a4b1 ("ath79: use rtl8366rb as a module")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Nick Hainke [Mon, 13 Mar 2023 18:35:49 +0000 (19:35 +0100)]
hostapd: update to 2023-03-29
Add patches:
- 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch
Remove upstreamed:
- 170-DPP-fix-memleak-of-intro.peer_key.patch
- 461-driver_nl80211-use-new-parameters-during-ibss-join.patch
- 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch
- 992-openssl-include-rsa.patch
Automatically refreshed:
- 011-mesh-use-deterministic-channel-on-channel-switch.patch
- 021-fix-sta-add-after-previous-connection.patch
- 022-hostapd-fix-use-of-uninitialized-stack-variables.patch
- 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch
- 040-mesh-allow-processing-authentication-frames-in-block.patch
- 050-build_fix.patch
- 110-mbedtls-TLS-crypto-option-initial-port.patch
- 120-mbedtls-fips186_2_prf.patch
- 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch
- 150-add-NULL-checks-encountered-during-tests-hwsim.patch
- 160-dpp_pkex-EC-point-mul-w-value-prime.patch
- 200-multicall.patch
- 300-noscan.patch
- 310-rescan_immediately.patch
- 330-nl80211_fix_set_freq.patch
- 341-mesh-ctrl-iface-channel-switch.patch
- 360-ctrl_iface_reload.patch
- 381-hostapd_cli_UNKNOWN-COMMAND.patch
- 390-wpa_ie_cap_workaround.patch
- 410-limit_debug_messages.patch
- 420-indicate-features.patch
- 430-hostapd_cli_ifdef.patch
- 450-scan_wait.patch
- 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch
- 463-add-mcast_rate-to-11s.patch
- 465-hostapd-config-support-random-BSS-color.patch
- 500-lto-jobserver-support.patch
- 590-rrm-wnm-statistics.patch
- 710-vlan_no_bridge.patch
- 720-iface_max_num_sta.patch
- 730-ft_iface.patch
- 750-qos_map_set_without_interworking.patch
- 751-qos_map_ignore_when_unsupported.patch
- 760-dynamic_own_ip.patch
- 761-shared_das_port.patch
- 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch
Manually refresh:
- 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
- 301-mesh-noscan.patch
- 340-reload_freq_change.patch
- 350-nl80211_del_beacon_bss.patch
- 370-ap_sta_support.patch
- 380-disable_ctrl_iface_mib.patch
- 464-fix-mesh-obss-check.patch
- 470-survey_data_fallback.patch
- 600-ubus_support.patch
- 700-wifi-reload.patch
- 711-wds_bridge_force.patch
- 740-snoop_iface.patch
Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx),
EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK]
Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic]
Signed-off-by: Nick Hainke <vincent@systemli.org>
Haoan Li [Wed, 5 Apr 2023 18:42:15 +0000 (02:42 +0800)]
ramips: fix lzma-loader for buffalo_WSR_600DHP
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.
Fixes: #11919
Signed-off-by: Haoan Li <lihaoan1001@163.com>
Álvaro Fernández Rojas [Sun, 23 Apr 2023 09:44:34 +0000 (11:44 +0200)]
bmips: shg2500: add BCM4360 fallback SPROM
Apart from the embedded BCM63268 wireless, this device has an external BCM4360
connected by PCIe which needs a fallback SPROM.
b43 isn't enabled for this device because BCM4360 isn't supported (AC PHY).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sun, 23 Apr 2023 09:40:39 +0000 (11:40 +0200)]
bmips: dgnd3700v2: add b43 wireless driver
Apart from the embedded BCM6362 wireless, Netgear DGND3700v2 has external
BCM43228 wireless connected by PCIe.
Fallback SPROM isn't needed for this one because it has a physical SPROM.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 20 Apr 2023 09:09:38 +0000 (11:09 +0200)]
bmips: leds-sercomm-msp430: improve driver
- Add missing module functions.
- Fix infinite pattern trigger by converting negative values to 0.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 20 Apr 2023 08:59:08 +0000 (10:59 +0200)]
bmips: enet: add missing module functions
- Add missing MODULE_DEVICE_TABLE().
- Switch bcm6348-iudma to module_platform_driver().
- Add missing MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE and
MODULE_ALIAS.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 20 Apr 2023 08:51:45 +0000 (10:51 +0200)]
bmips: pci: use standard module functions
late_initcall_sync() is no longer needed so standard module functions can be
used on all bmips PCI/PCIe drivers.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 20 Apr 2023 08:28:04 +0000 (10:28 +0200)]
mac80211: b43: only enable bcma or ssb on bmips
By default both kmod-bcma and kmod-ssb are selected by kmod-b43.
However, only one of both modules is needed for bmips subtargets:
- bcma: bcm6318, bcm6328, bcm6362, bcm63268
- ssb: bcm6358, bcm6368
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 20 Apr 2023 08:07:26 +0000 (10:07 +0200)]
bmips: drop custom b43-sprom fixups
b43-sprom fixups and no longer used and can be removed from bmips targets.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 20 Apr 2023 08:05:52 +0000 (10:05 +0200)]
bmips: switch to generic bcma/ssb fallback SPROM
Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback
SPROMs. This way we don't need to include the b43-sprom fixups on devices
without Broadcom wireless.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 20 Apr 2023 07:58:03 +0000 (09:58 +0200)]
kernel: add bcma/ssb fallback SPROM support
This adds generic kernel support for Broadcom Fallback SPROMs so that it can be
used in any target, even non Broadcom ones.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Thu, 20 Apr 2023 07:54:55 +0000 (09:54 +0200)]
broadcom-sprom: add new package
This adds a new package with Broadcom SPROMs that can be used as fallback when
the devices lack physical SPROMs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Daniel Kestrel [Fri, 17 Mar 2023 07:22:06 +0000 (08:22 +0100)]
generic: 5.15: replace ramips AR8033 fiber patch with 5.18 patches
A patch was added in kernel 5.4 to support the fiber operation of
AR8033 with ramips devices. In kernel 5.18 similar enhancements
were added to the kernel. Those patches are required for other
fiber based devices but when added, build fails for ramips targets.
This commit removes the ramips patch and adds the kernel 5.18 ones.
Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
[ split commit,refresh patch and improve commit message ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Kestrel [Fri, 17 Mar 2023 07:22:06 +0000 (08:22 +0100)]
generic: 5.10: replace ramips AR8033 fiber patch with 5.18 patches
A patch was added in kernel 5.4 to support the fiber operation of
AR8033 with ramips devices. In kernel 5.18 similar enhancements
were added to the kernel. Those patches are required for other
fiber based devices but when added, build fails for ramips targets.
This commit removes the ramips patch and adds the kernel 5.18 ones.
Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
[ split commit, refresh patch and improve commit title ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Fri, 21 Apr 2023 23:59:38 +0000 (01:59 +0200)]
generic: 5.10: replace pending 730-net-phy-at803x-fix... with upstream
Replace pending 730-net-phy-at803x-fix-feature-detection.patch with
upstream version and move it to backport.
Refresh other related patch while moving it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sat, 22 Apr 2023 00:27:08 +0000 (02:27 +0200)]
CI: check-kernel-patches: upload proposed refreshed patches
Upload proposed refreshed patches if the check fails.
This should help devs refresh the patches if they don't have access to a
buildroot.
Devs should ALWAYS refresh the patches before submitting and merging
commits.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Golle [Sat, 22 Apr 2023 11:24:40 +0000 (12:24 +0100)]
kernel: refresh 729-net-phy-realtek-introduce-rtl822x_probe.patch
The patch needs to be refreshed to apply cleanly.
Fixes: 998b973157 ("kernel: net: phy: realtek: improve RealTek 2.5G PHY driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Chukun Pan [Fri, 10 Feb 2023 15:08:25 +0000 (23:08 +0800)]
mediatek: add support for TP-Link TL-XDR4288/608x
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: ESMT M15T4G16256A 512MB
Ethernet (Max Speed):
XDR4288: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
XDR6086: 1x 2.5G Wan, 1x 2.5G Lan, 1x 1G Lan
XDR6088: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
WiFi:
XDR4288: MT7976DAN (2.4G 2T2R, 5G 3T3R)
XDR6086/XDR6088:
WiFi1: MT7976GN 2.4GHz 4T4R
WiFi2: MT7976AN 5GHz 4T4R
Button: Reset, WPS, Turbo
USB: 1 x USB 3.0
Power: DC 12V 4A
Flash instructions:
1. Execute the following operation to open nc shell:
https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting
2. Replace the stock bootloader to OpenWrt's:
dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin
dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip
3. Connect to your PC via the Gigabit port of the router,
set a static ip on the ethernet interface of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
4. Download the initramfs image, and restart the router,
waiting for tftp recovery to complete.
5. After openwrt boots up, perform sysupgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
[Add uboot build, fit and sysupgrade support, fix RealTek PHYs]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 2 Dec 2022 04:29:58 +0000 (04:29 +0000)]
uboot-mediatek: add TP-Link TL-XDR4288 and TL-XDR608x
TP-Link TL-XDR608x comes with locked vendor loader. Add U-Boot build
for replacement loader for both TL-XDR6086 and TL-XDR6088. The only
difference at U-Boot level is the different filename requested via
TFTP, matching the corresponding OpenWrt build artifacts for each
device.
The TP-Link TL-XDR4288 has the same hardware as the TP-Link TL-XDR6088
except for the wireless part. Also create a uboot for the TP-Link
TL-XDR4288.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[rebase to uboot 23.04, correct led and button]
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Daniel Golle [Sat, 22 Apr 2023 00:52:04 +0000 (01:52 +0100)]
kernel: net: phy: realtek: improve RealTek 2.5G PHY driver
* use interface mode switching only when operating in C45 mode
Linux prevents switching the interface mode when using C22 MDIO,
hence use rate-adapter mode in case the PHY controlled via C22.
* use phy_read_paged where appropriate
* use existing generic inline functions to handle 10GbE advertisements
instead of redundantly defining register macros in realtek.c which
are not actually vendor-specific.
* make sure 10GbE advertisement is valid, preventing false-positive
warning "Downshift occurred from negotiated speed 2.5Gbps to actual
speed 1Gbps, check cabling!" with some link-partners using 1G mode.
* Support Link Down Power Saving Mode (ALDPS)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Fri, 14 Apr 2023 13:17:28 +0000 (15:17 +0200)]
libpcap: update to 1.10.4
Changes:
https://git.tcpdump.org/libpcap/blob/
104271ba4a14de6743e43bcf87536786d8fddea4:/CHANGES
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Fri, 14 Apr 2023 11:22:36 +0000 (13:22 +0200)]
tools/isl: update to 0.26
Changelog:
https://repo.or.cz/isl.git/blob/
e58af07f91c94db81627fb801fa6f52c3a7201a8:/ChangeLog
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 15 Apr 2023 06:44:42 +0000 (08:44 +0200)]
tools/libressl: update to 3.7.2
Release Notes:
https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.7.2-relnotes.txt
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Thu, 20 Apr 2023 12:53:55 +0000 (08:53 -0400)]
kernel: bump 5.10 to 5.10.178
Removed upstreamed:
backport-5.10/430-v6.3-ubi-Fix-failure-attaching-when-vid_hdr-offset-equals.patch[1]
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.178&id=
0279e82e148407feec88466990de14bcba9e12c0
All other patches automatically rebased.
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Thu, 20 Apr 2023 12:53:12 +0000 (08:53 -0400)]
kernel: bump 5.15 to 5.15.108
Removed upstreamed:
backport-5.15/430-v6.3-ubi-Fix-failure-attaching-when-vid_hdr-offset-equals.patch[1]
backport-5.15/612-v6.3-skbuff-Fix-a-race-between-coalescing-and-releasing-S.patch[2]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.108&id=
85d7a7044b759d865d10395a357632af00de5867
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.108&id=
906a6689bb0191ad2a44131a3377006aa098af59
Build system: x86_64
Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Chukun Pan [Thu, 6 Apr 2023 12:21:03 +0000 (20:21 +0800)]
generic: update nvmem cell mac-address-ascii support
Instead of use mac-address-ascii in nvmem_get_mac_address
function, move it into of_get_mac_addr_nvmem function to
support more devices.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Wed, 19 Oct 2022 15:16:30 +0000 (23:16 +0800)]
ramips: MSG1500 X.00: switch to mac-address-ascii dts
The Config partition of some machines is special, and the openwrt script
cannot read the protest_lan_mac correctly. This problem can be solved by
reading the mac address (ascii) in dts.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Wed, 5 Apr 2023 12:01:50 +0000 (20:01 +0800)]
mediatek: filogic: remove redundant code for tuf-ax4200
Remove redundant code in 02_network.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Mon, 20 Mar 2023 15:08:01 +0000 (23:08 +0800)]
mediatek: filogic: move mac address setting together
Simultaneously sort in the order of letters.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Sun, 19 Mar 2023 15:21:35 +0000 (23:21 +0800)]
mediatek: filogic: fix network config for mt7986a-rfb
Fix the network configuration according to the device tree.
Fixes: 5faff99 ("mediatek: filogic: fix mt7986a ethernet devicetree entries")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Christian Marangi [Thu, 20 Apr 2023 19:30:52 +0000 (21:30 +0200)]
tools/squashfs4: backport OpenWrt extended options patch
Due to us keeping a patch around for years and never proposing it to
squashfs4 repository, we resulted in having the same squashfs4 version
but with different supported options. (openwrt patched -- upstream)
To workaround this problem, a non-standard option was required.
To not have surprise on tool bump, backport the patch and add the new
config option required to enable these extended non-standard options.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Andrew Sim [Tue, 18 Apr 2023 16:54:01 +0000 (18:54 +0200)]
ksmbd: update to latest 3.4.8 release
Changelog: https://github.com/cifsd-team/ksmbd/releases/tag/3.4.8
Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
Rosen Penev [Thu, 20 Apr 2023 08:59:32 +0000 (01:59 -0700)]
tools/lz4: build with meson
Simplifies Makefile and speeds up compilation.
Before:
Executed in 68.00 secs fish external
usr time 104.17 secs 1.33 millis 104.17 secs
sys time 4.29 secs 0.35 millis 4.29 secs
After:
Executed in 27.98 secs fish external
usr time 25.18 secs 1.32 millis 25.18 secs
sys time 3.31 secs 0.35 millis 3.31 secs
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Golle [Thu, 20 Apr 2023 10:31:49 +0000 (11:31 +0100)]
uboot-mediatek: fix factory/reset button
U-Boot commit
ea6fdc13595 ("dm: button: add support for linux_code in
button-gpio.c driver") makes it mandatory to specify linux,code for all
buttons. As that broke handling of the reset button in U-Boot with the
update to U-Boot 2023.04, add linux,code for all butons.
Reported-by: @DragonBluep
Fixes: 50f7c5af4a ("uboot-mediatek: update to v2023.04")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 19 Apr 2023 22:38:31 +0000 (23:38 +0100)]
mediatek: filogic: update kernel config-5.15
Expose thermal-zone as hwmon sensor, remove thermal emulation driver
and add some missing symbols.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 18 Apr 2023 18:09:01 +0000 (19:09 +0100)]
mediatek: bpi-r3: allow up to 3W per SFP module
According to SinoVoip up to 3A @ 3.3V are available for both
SFP modules together. Raise energy limit from 1W (default) to 3W,
however, be aware that using modules consuming more than 1W will
require active cooling!
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Wed, 12 Apr 2023 19:50:29 +0000 (21:50 +0200)]
tools/dwarves: update to 1.25
Remove AUTORELEASE and HOST_BUILD_PARALLEL.
Release Notes:
https://lore.kernel.org/dwarves/ZDG4qxirpIfmbiip@kernel.org/T/#u
Signed-off-by: Nick Hainke <vincent@systemli.org>
Stefan Lippers-Hollmann [Sun, 16 Apr 2023 09:57:42 +0000 (05:57 -0400)]
kernel: fix up qrtr packaging after 5.15.107 bump
qrtr/ns.ko is now merged into qrtr/qrtr.ko, so drop the individual module packaging.
Fixes: f4989239cc91 ("kernel: bump 5.15 to 5.15.107")
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x/ax3600, x86_64/FW-7543B, mt7621/dap-x1860
John Audia [Thu, 13 Apr 2023 17:28:17 +0000 (13:28 -0400)]
kernel: bump 5.15 to 5.15.107
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Nick Hainke [Sun, 16 Apr 2023 21:05:05 +0000 (23:05 +0200)]
tools/cmake: update to 3.26.3
Release Notes:
- https://www.kitware.com/cmake-3-26-1-available-for-download/
- https://www.kitware.com/cmake-3-26-2-available-for-download/
- https://www.kitware.com/cmake-3-26-3-available-for-download/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Kabuli Chana [Tue, 11 Apr 2023 22:52:56 +0000 (16:52 -0600)]
mwlwifi: update to version 10.3.9.0-
20230311
upstream PR 408 improvements:
-Fix AMSDU packets unused
-Removed the ASMDU packets queue
-Add more info in the iw tool
-fix is_hw_crypto_enabled
-Optimization AMPDU_TX_OPERATIONAL (avoid a spinlock)
change to wongsyrone mod
Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
Álvaro Fernández Rojas [Tue, 18 Apr 2023 18:11:28 +0000 (20:11 +0200)]
bmips: pci-bcm6348: load IO resource from DT ranges
Correctly load IO resource from DT ranges and remove the specific IO resource.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Mon, 10 Apr 2023 10:00:02 +0000 (12:00 +0200)]
bmips: drop unneeded ath9k fixup
We no longer need the custom ath9k fixup now that we're using the standard
kmod-owl-loader.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Mon, 10 Apr 2023 09:54:02 +0000 (11:54 +0200)]
bmips: hg556a: switch to kmod-owl-loader
Stop using custom ath9k fixup and switch to standard kmod-owl-loader
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Tony Butler [Wed, 30 Nov 2022 14:19:37 +0000 (06:19 -0800)]
tools/bzip2: add `bzip2` binaries
`bzip2` is the standard executable for bzip2 compression
this includes development includes and both static and shared libs
(libbz2) which can be used by other packages
the initramfs generator offers the BZIP2 option but there was no
executable to support it, and worked only via side effect of having a
system-installed version of bzip2, which could be less predictable
Signed-off-by: Tony Butler <spudz76@gmail.com>
[ remove unintended change ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Apr 2023 13:22:48 +0000 (15:22 +0200)]
Revert "tools/bzip2: add `bzip2` binaries"
This reverts commit
394d7134ec42f14ddb91769c737098753fa68266.
The commit has unintentded change that cause compilation error with SDK
or LZO compression.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Tue, 18 Apr 2023 08:35:47 +0000 (10:35 +0200)]
mac80211: ath11k: replace 160MHz fix with upstream pending one
QCA has finally sent a proper fixup for the 160MHz regression upstream,
so lets use the pending fix which also properly sets center frequency 2
in case 80+80 MHz is used.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Tony Butler [Tue, 18 Apr 2023 02:32:18 +0000 (19:32 -0700)]
build: fix incorrect initramfs gzip compression
Requires: tools/libdeflate
fix consistency of executable to use
`$(STAGING_DIR_HOST)/bin/libdeflate-gzip`, and not system-installed ones
from the usual environment `PATH`;
this affects option `CONFIG_KERNEL_INITRAMFS_COMPRESSION_GZIP`
this may have worked in the past but only via side effect of having the
binaries on the host system (and whatever unpredictable version or
patchset those might be), and did not use the improved but totally
compatible libdeflate-gzip
Fixes: 330bd380e8b6 ("image: allow building FIT and uImage with ramdisk")
Signed-off-by: Tony Butler <spudz76@gmail.com>
Tony Butler [Tue, 18 Apr 2023 02:28:36 +0000 (19:28 -0700)]
build: fix incorrect initramfs bzip2 compression
Requires: tools/bzip2
fix consistency of executable to use `$(STAGING_DIR_HOST)/bin/bzip2`, and
not system-installed ones from the usual environment `PATH`;
this affects option `CONFIG_KERNEL_INITRAMFS_COMPRESSION_BZIP2`
this may have worked in the past but only via side effect of having the
binaries on the host system (and whatever unpredictable version or
patchset those might be)
Fixes: 330bd380e8b6 ("image: allow building FIT and uImage with ramdisk")
Signed-off-by: Tony Butler <spudz76@gmail.com>
Tony Butler [Wed, 30 Nov 2022 14:19:37 +0000 (06:19 -0800)]
tools/bzip2: add `bzip2` binaries
`bzip2` is the standard executable for bzip2 compression
this includes development includes and both static and shared libs
(libbz2) which can be used by other packages
the initramfs generator offers the BZIP2 option but there was no
executable to support it, and worked only via side effect of having a
system-installed version of bzip2, which could be less predictable
Signed-off-by: Tony Butler <spudz76@gmail.com>
Michał Kępień [Sat, 1 Apr 2023 18:54:14 +0000 (20:54 +0200)]
ath79: mikrotik: update kernel on NAND using Yafut
Instead of erasing the entire NAND partition holding the kernel during
every system upgrade and then flashing a Yaffs file system image
prepared using kernel2minor (not accounting for bad blocks in the
process), use the Yafut utility to replace the kernel executable on
MikroTik NAND devices, preserving the existing Yaffs file system
(including bad block information) on the partition holding the kernel.
Add Yafut to DEFAULT_PACKAGES for the ath79/mikrotik target, so that the
tool is included in the initramfs images created when building for
multiple profiles. However, exclude Yafut from the images built for
MikroTik devices with NOR flash as the tool is currently only meant to
be used on devices with NAND flash.
As this addresses the concerns for MikroTik NAND devices discussed in
commit
9d96b6fb72 ("ath79/mikrotik: disable building NAND images"),
re-enable building images for these devices.
Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
Michał Kępień [Fri, 31 Mar 2023 10:40:31 +0000 (12:40 +0200)]
yafut: add a kernel update tool for MikroTik NAND
Commit
9d96b6fb72 ("ath79/mikrotik: disable building NAND images")
disabled building images for MikroTik devices with NAND flash due to a
less than satisfactory method used for updating the kernel on those
devices back then.
To address the problem, add support for updating the kernel on MikroTik
devices with NAND flash using a new tool, Yafut, which enables copying
files from/to Yaffs file systems even if the kernel does not have native
support for the Yaffs file system compiled in. Instead of erasing the
entire NAND partition holding the kernel during every system upgrade
(which is what the previously-used approach employing kernel2minor
involved), Yafut preserves the Yaffs filesystem present on that
partition and only replaces the kernel executable. This allows bad
block information to be preserved across sysupgrade runs and also
enables wear leveling on the NAND partition holding the kernel. Yafut
does not rely on kernel2minor in any way and intends to eventually
supersede the latter for NAND devices.
Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
Michał Kępień [Fri, 31 Mar 2023 10:40:31 +0000 (12:40 +0200)]
kernel: backport MEMREAD ioctl
MEMREAD is a new ioctl for MTD character devices that was first included
in Linux 6.1. It allows userspace applications to use the Linux
kernel's OOB autoplacement mechanism while reading data from NAND
devices. The Yafut tool needs this ioctl to do its job.
Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
Michał Kępień [Fri, 31 Mar 2023 10:40:31 +0000 (12:40 +0200)]
ath79: mikrotik: drop unused files from ramdisk
The ramdisk used by sysupgrade on MikroTik devices currently includes
U-Boot fw_* files that are not necessary for performing a system upgrade
on that platform. The relevant lines were added to
target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh by commit
a66eee6336 ("ath79: add mikrotik subtarget"), likely because they also
existed in target/linux/ath79/nand/base-files/lib/upgrade/platform.sh,
where the platform_do_upgrade_mikrotik_nand() function moved by commit
a66eee6336 originally lived. However, these lines were added to
target/linux/ath79/nand/base-files/lib/upgrade/platform.sh by commit
55e6c903ae ("ath79: GL-AR300M: provide NAND support; increase to 4 MB
kernel"), which is not related to MikroTik devices in any way.
Remove the code adding unused U-Boot fw_* files to the ramdisk used by
sysupgrade on MikroTik devices.
Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
Felix Fietkau [Mon, 17 Apr 2023 15:17:16 +0000 (17:17 +0200)]
mac80211: update to v6.1.24
Drop patches accepted upstream
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Bauer [Mon, 17 Apr 2023 17:15:22 +0000 (19:15 +0200)]
ath79: create Aruba AP-105 APBoot compatible image
Alter the Aruba AP-105 image generation process so OpenWrt can be loaded
with the vendor Aruba APBoot.
This works by prepending the OpenWrt LZMA loader to the uImage and
jumping directly to the loader. Aruba does not offer bootm on these
boards.
This approach keeps compatibility to devices which had their U-Boot
replaced. Both bootloaders can boot the same image.
The same modification is most likely also possible for the Aruba AP-175.
With this patch, new installations do not require replacing the
bootloader and can be performed from the serial console without opening
the case.
Installation
------------
1. Attach to the serial console of the AP-105.
Interrupt autoboot and change the U-Boot env.
$ setenv apb_rb_openwrt "setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66;
netget 0x84000000 ap105.bin; go 0x84000040"
$ setenv apb_fb_openwrt "cp.b 0xbf040000 0x84000000 0x10000;
go 0x84000040"
$ setenv bootcmd "run apb_fb_openwrt"
$ saveenv
2. Load the OpenWrt initramfs image on the device using TFTP.
Place the initramfs image as "ap105.bin" in the TFTP server
root directory, connect it to the AP and make the server reachable
at 192.168.1.66/24.
$ run apb_rb_openwrt
3. Once OpenWrt booted, transfer the sysupgrade image to the device
using scp and use sysupgrade to install the firmware.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Mon, 17 Apr 2023 16:58:15 +0000 (18:58 +0200)]
firmware-utils: update to latest HEAD
e8191eb tplink-safeloader: increase support-list size for AX23 v1
Signed-off-by: David Bauer <mail@david-bauer.net>
Nick Hainke [Thu, 6 Apr 2023 06:37:50 +0000 (08:37 +0200)]
tools/libdeflate: update to 1.18
Release Notes:
https://github.com/ebiggers/libdeflate/blob/master/NEWS.md#version-118
Signed-off-by: Nick Hainke <vincent@systemli.org>
Mark Onstid [Fri, 7 Apr 2023 15:21:48 +0000 (11:21 -0400)]
ath79: fix LED pinout for Comfast CF-E314N v2
In addition to standardizing LED names to match the rest of the systems, this
commit fixes a possibly erroneous pinout for LEDs in Comfast CF-E314N v2.
In particular, rssimediumhigh and rssihigh are moved from pins 13 and 14 to
14 and 16 respectively. In addition to working on a test device, this pinout
better matches the one set out in the prototype support patch for the device
in Github PR #1873.
Signed-off-by: Mark Onstid <turretkeeper@mail.com>
Oleksandr Zharov [Sat, 15 Apr 2023 20:23:41 +0000 (23:23 +0300)]
ramips: add Xiaomi RA75 red signal led
RA75 has 5 physical LEDs under 2 indicators, mixed with light pipes:
Indicator "System":
GPIO0: blue
GPIO2: amber
Indicator "Signal":
GPIO44: blue
GPIO37: amber
GPIO46: red
All except GPIO46 were already added by Jo Deisenhofer. GPIO46 is used for UART1 by
default, so it needs additional pin control change in devicetree to be operational.
Verified on my RA75.
Signed-off-by: Oleksandr Zharov <alex.zeed@gmail.com>
Felix Fietkau [Mon, 17 Apr 2023 11:14:41 +0000 (13:14 +0200)]
netifd: update to the latest version
7de5440a520f device: fix segfault when recreating devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Thu, 13 Apr 2023 09:20:05 +0000 (11:20 +0200)]
tcpdump: update to 4.99.4
Fixes CVE-2023-1801.
Changelog can be found here:
https://git.tcpdump.org/tcpdump/blob/
55bc126b0216cfe409b8d6bd378f65679d136ddf:/CHANGES
Signed-off-by: Nick Hainke <vincent@systemli.org>
David Bauer [Wed, 12 Apr 2023 20:06:18 +0000 (22:06 +0200)]
ipq40xx: convert AP-365 to DSA
Re-enable the Aruba AP-365 with DSA support. Changes are trvivial, as
the board design is pretty much the already updated AP-303.
Run-tested on the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Sat, 15 Apr 2023 00:35:17 +0000 (01:35 +0100)]
kernel: backport fix for recently introduced UBI bug
Import commit "ubi: Fix failure attaching when vid_hdr offset equals to
(sub)page size" which did not yet make it to stable upstream Linux trees.
Fixes: #12232
Fixes: #12339
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 14 Apr 2023 16:54:54 +0000 (17:54 +0100)]
uboot-mediatek: fix build for RAVPower RP-WD009
Updating to U-Boot 2023.04 broke the build for the RAVPower RP-WD009
MT7628 board. This was due to upstream conversion of CONFIG_* to CFG_*
which was not applied to our downstream patch adding support for the
RAVPower RP-WD009 device.
Apply CONFIG_* to CFG_* converion analog to what has been done also
for mt7928_rfb upstream.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Thu, 13 Apr 2023 19:28:07 +0000 (21:28 +0200)]
kernel: backport fix for a page pool related race condition
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Thu, 13 Apr 2023 19:16:05 +0000 (20:16 +0100)]
generic: move accepted patch to backport-5.15
The patch adding SFP quirk for MXPD 483II was accepted upstream and
will be part of Linux v6.3:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=
ad651d68cee75e9ac20002254c4e5d09ee67a84b
Move the patch from pending-5.15 to backport-5.15.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 13 Apr 2023 04:03:03 +0000 (05:03 +0100)]
mediatek: sync pinctrl-mt7981 and pinctrl-mt7986 drivers
Now that new pinconf features have been backported sync pinctrl-mt7981
and pinctrl-m7986 with bleeding-edge upstream versions.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 13 Apr 2023 04:01:30 +0000 (05:01 +0100)]
mediatek: backport new pinctrl features
Backport new features for MediaTek pinctrl/pinconf drivers from upstream.
This will serve as the base to improve pinconf bias/pull-up/pull-down on
MT7981 and MT7986, and also prepare for upcoming support for MT7988.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Matthias Schiffer [Thu, 13 Apr 2023 18:51:05 +0000 (20:51 +0200)]
uclient: update to Git version 2023-04-13
007d94546749 uclient: cancel state change timeout in uclient_disconnect()
644d3c7e13c6 ci: improve wolfSSL test coverage
dc54d2b544a1 tests: add certificate check against letsencrypt.org
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Ian Chang [Tue, 11 Apr 2023 08:07:24 +0000 (16:07 +0800)]
mvebu: puzzle-mcu: add mcu write retry function
Avoid MCU getting "command reply receive timed out" message when LED
configuration setting trigger function is enabled in heartbeat mode.
Signed-off-by: Ian Chang <ianchang@ieiworld.com>
Daniel Golle [Tue, 11 Apr 2023 23:21:22 +0000 (00:21 +0100)]
uboot-mediatek: update to v2023.04
Update to next U-Boot timed release.
Remove now obsolete patch
100-01-board-mediatek-add-more-network-configurations.patch
Default IP addresses are now dealt with in Kconfig, no longer in board-
specific C header files.
Add patches to restore ANSI support in bootmenu which was broken upstream,
always use high-speed mode on serial UART for improved stability and fix
an issue with pinconf not being applied on MT7623 resulting in eMMC
being inaccessible when booting from micro SD card.
In order to keep the size of the bootloader on MT7623 below 512kB remove
some unneeded commands on both MT7623 boards.
Tested on:
* BananaPi BPi-R2 (MT7623N)
* BananaPi BPi-R3 (MT7986A)
* BananaPi BPi-R64 (MT7622A)
* Linksys E8450 (MT7622B)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Andre Heider [Wed, 2 Nov 2022 07:50:20 +0000 (08:50 +0100)]
base-files: add 'isup' to the wifi script
This is a silent command that allows easy wifi up/down automation for
scripts.
It takes one or multiple devices as arguments (or all if none are passed),
and the exit code indicates if any of those is not up.
E.g.:
wifi isup && echo "all wifi devices are up"
wifi isup radio0 || echo "this wifi is down"
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Wed, 2 Nov 2022 07:49:35 +0000 (08:49 +0100)]
base-files: use named variables in the wifi script
Use the already present but unused $cmd and $dev variables instead of
positional parameters in ubus_wifi_cmd() to improve readability.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Robert Marko [Wed, 12 Apr 2023 11:17:03 +0000 (13:17 +0200)]
mac80211: ath11k: sync with ath-next
Synchronize the ath11k backports with the current ath-next tree.
This replaces the management TLV pending fix with the upstreamed one,
fixes traffic flooding when AP and monitor modes are used at the same time,
fixes QCN9074 always showing -95 dBm for station RSSI in dumps,
fixes potential crash on boot if spectral scan is enabled due to writing to
unitialized memory and adds 11d scan offloading for WCN6750 and WCN6855.
Signed-off-by: Robert Marko <robimarko@gmail.com>
David Bauer [Sat, 8 Apr 2023 23:12:08 +0000 (01:12 +0200)]
firmware-utils: update to latest HEAD
6a58f45 tplink-safeloader: add US-CA-TW support-list entries for Archer AX23v1
Signed-off-by: David Bauer <mail@david-bauer.net>
Christian Marangi [Wed, 12 Apr 2023 10:18:19 +0000 (12:18 +0200)]
tools/squashfs4: refresh multiple lzma configuration option patch
Refresh multiple lzma configuration option patch with new version
proposed upstream. (Reintroduce -Xe option and add more checks and
general better code quality)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Wed, 12 Apr 2023 10:13:46 +0000 (12:13 +0200)]
Revert "image: update LZMA_XZ_OPTIONS with new squashfs4 tool"
This reverts commit
a33b97dcb1bd6e68f01c571e92ef02c3ab721523.
A new version of the squashfs4 tool patch reintroduced the -Xe option.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Wed, 12 Apr 2023 10:02:57 +0000 (12:02 +0200)]
ipq-wifi: bump to latest git HEAD
b22487d ath11k: qcn8074: Update regDb in every BDF
3add8be ath11k: ipq8074: Update regDb in every BDF
8bb6039 ath11k: ipq8074: add Netgear RAX120v2
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Tue, 11 Apr 2023 18:20:18 +0000 (20:20 +0200)]
mac80211: ath11k: Remove regulatory intersection
Currently, during initialization ath11k will receive a regulatory event
from the firmware in which it will receive the default regulatory domain
code and accompanying rules list and report those to the kernel.
Then if you try to change the regulatory domain to a different country code
it will do a weird thing in which it will send that to the FW and after
receiving the appropriate regulatory event it will parse the rules.
However, while its parsing there is a weird thing being done, and that is
that new raw rules from FW get intersected with the rules from the default
domain.
This is creating a big issue as the default domain is almost always set to
"US" or just "00" aka world so ath11k will unfairly limit you to the most
restrictive combination of rules based on the default domain and your
desired domain.
For example, in ETSI countries this is causing channels 12 and 13 on 2.4GHz
to not be usable since "US" limits 2.4GHz to 2472MHz instead of 2482MHz
like ETSI countries do.
So, lets do what TIP and even QCA do in their ath11k downstream tree and
completely get rid of the interesection code in ath11k.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Nick Hainke [Sun, 9 Apr 2023 09:26:20 +0000 (11:26 +0200)]
tools/mkimage: update to 2023.04
Update to latest version.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 9 Apr 2023 09:17:43 +0000 (11:17 +0200)]
uboot-envtools: update to 2023.04
Update to latest version.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Rafał Miłecki [Mon, 10 Apr 2023 17:01:35 +0000 (19:01 +0200)]
base-files: fix nand_upgrade_ubinized()
When using "ubiformat" with stdin it requires passing image size using
the -S argument. Provide it just like we do for "ubiupdatevol".
This fixes:
ubiformat: error!: must use '-S' with non-zero value when reading from stdin
This change fixes sysupgrade for bcm53xx and bcm4908 NAND devices
possibly some other targets too.
Cc: Rodrigo Balerdi <lanchon@gmail.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Fixes: 971071212052 ("base-files: accept gzipped nand sysupgrade images")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Michael Trinidad [Fri, 7 Apr 2023 13:10:29 +0000 (09:10 -0400)]
base-files: fix Linksys upgrade, restore config step
It appears that the refactor of the upgrade process for NAND devices resulted in the nand_do_upgrade_success step not being called for
devices using the linksys.sh script. As a result, configuration was
not preserved over sysupgrade steps.
This corrects a typo in the call of nand_do_upgrade_failed for ipq40xx
and ipq806x devices using the linksys.sh script.
Fixes: 8634c1080d50 ("ipq40xx: Fix Linksys upgrade, restore config step")
Fixes: 2715aff5df83 ("ipq806x: Fix Linksys upgrade, restore config step")
Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
Michael Trinidad [Fri, 7 Apr 2023 13:02:37 +0000 (09:02 -0400)]
mvebu: cortexa9: fix Linksys upgrade, restore config step
It appears that the refactor of the upgrade process for NAND devices resulted in the nand_do_upgrade_success step not being called for
devices using the linksys.sh script. As a result, configuration was
not preserved over sysupgrade steps.
This restores the preservation of configs for mvebu/cortexa9 devices using the
linksys.sh script.
Fixes: e25e6d8e5407 ("base-files: fix and clean up nand sysupgrade code")
Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
Michael Trinidad [Sat, 1 Apr 2023 19:04:02 +0000 (15:04 -0400)]
kirkwood: fix Linksys upgrade, restore config step
It appears that the refactor of the upgrade process for NAND devices
resulted in the nand_do_upgrade_success step not being called for
devices using the linksys.sh script. As a result, configuration was
not preserved over sysupgrade steps.
This restores the preservation of configs for kirkwood devices using the
linksys.sh script.
Fixes: e25e6d8e5407 ("base-files: fix and clean up nand sysupgrade code")
Fixes: #12298
Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
Paul Spooren [Wed, 22 Feb 2023 18:48:25 +0000 (19:48 +0100)]
bcm53xx: switch to Kernel 5.15 by default
Getting ready for the next release.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Paul Spooren [Wed, 22 Feb 2023 18:52:13 +0000 (19:52 +0100)]
bcm4908: switch to Kernel 5.15 by default
Getting ready for the next release.
Signed-off-by: Paul Spooren <mail@aparcar.org>
[rmilecki: tested on GT-AC5300: boot, sysupgrade & 940 Mbps NAT]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Arturas Moskvinas [Sat, 8 Apr 2023 20:12:13 +0000 (23:12 +0300)]
uboot-sunxi: update support for FriendlyARM ZeroPI
Since commit torvalds/linux@
bbc4d71 ("net: phy: realtek: fix rtl8211e rx/tx
delay config") network is broken on the FriendlyELEC(ARM) ZeroPi.
Replaces custom patches with upstream uboot patch:
https://source.denx.de/u-boot/u-boot/-/commit/
2527b24f39d8f27ba2fd922ca27a1f14119cfa1b
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
projects / openwrt / staging / svanheule.git / log