[PATCH] atyfb: Remove code that sets sync polarity unconditionally

Currently, atyfb has code that sets the hsync and vsync polarity based on the
current video mode, without letting the user override the settings.

Remove this particular code.  The sync polarities are set by the PROM, the
user or by the videomode.

Signed-off-by: Alexander Kern <alex.kern@gmx.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] console: Fix buffer copy on vc resize

On a vc resize, the contents of the old screen buffer are transferred to the
new screenbuffer.  If the new screenbuffer is smaller than the old one, only
the contents from the bottom are copied to new.  If the contents of the old
buffer are located at the top, then the contents will not be copied to the new
buffer resulting in a blank screen.

This bug will happen only if the vc in question is not in the foreground.
Doing an fbset -a or con2fbmap will trigger this bug.

To fix this problem, base the start of the copy from the location of the
current cursor.  If the cursor is near the top of the buffer, copy the
contents at the top, and if the cursor is near the bottom of the buffer, then
copy the contents at the bottom.  In the unlikely case where the new row size
is greater than 2x smaller than the old one, and the cursor is in the middle,
copy 1/2 screenful from the top and bottom of the cursor position.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbcon: Saner 16-color to 4-color conversion

Currently, the default linux 16-colors are converted to 4-colors by simply
dividing the values by 4.  However, this is not necessarily correct since the
first 4 colors are converted to black, rendering them invisible.

So, for black, no conversion; for light colors, convert to gray, for normal
text color, no conversion, and for bright colors, convert to intense white.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Fix greater than 1 bit monochrome color handling

Currently, fbcon assumes that the visual FB_VISUAL_MONO* is always 1 bit.
According to Geert, there are old hardware where it's possible to have
monochrome at 8-bit, but has only 2 colors, black - 0x00 and white - 0xff.
Fix color handlers (fb_get_color_depth, and get_color) for this special case.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidiafb: Fallback to firmware EDID

If nvidiafb fails to probe the EDID block, get the EDID from the BIOS.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] savagefb: Driver updates

- Fallback to firmware EDID if chipset has no DDC/I2C support or if I2C
  probing failed

- Add fb_blank hook

- Fix savagefb_suspend/resume to enable driver to successfully suspend and
  resume from S3, memory or disk

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Resurrect hooks to get EDID from firmware

For the i386, code is already present in video.S that gets the EDID from the
video BIOS.  Make this visible so drivers can also use this data as fallback
when i2c does not work.

To ensure that the EDID block is returned for the primary graphics adapter
only, by check if the IORESOURCE_ROM_SHADOW flag is set.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: geode updates

Geode framebuffer driver updates:

- Local mode list (taken from modedb.c) containing only relevant modes.
  This also makes the driver work as a module.

- Make it a PCI driver (from James Simmons <jsimmons@infradead.org>).

- A few other minor cosmetic bits and pieces.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: prevent drivers that have hardware cursors from calling software cursor code

This patch removes drivers that have hardware cursors from calling the
software cursor code.  Also if the driver sets a no hardware cursor flag
then the driver reports a error it someone attempts to use the cursor.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] vesafb: Add blanking support

Add rudimentary support by manipulating the VGA registers.  However, not
all vesa modes are VGA compatible, so VGA compatiblity is checked first.
Only 2 levels are supported, powerup and powerdown.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Add fbset -a support

Add capability to fbdev to listen to the FB_ACTIVATE_ALL flag.  If set, it
notifies fbcon that all consoles must be set to the current var.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: fix handling of malformed 9P messages

This patch attempts to do a better job of cleaning up after detecting errors
on the transport.  This should also improve error reporting on broken
connections to servers.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: readlink extended mode check

LANL reported some issues with random crashes during mount of legacy protocol
servers (9P2000 versus 9P2000.u) -- crash was always happening in readlink
(which should never happen in legacy mode).  Added some sanity conditionals to
the get_inode code which should prevent the errors LANL was seeing.  Code
tested benign through regression.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: Fix support for special files (devices, named pipes, etc.)

Fix v9fs special files (block, char devices) support.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: Clean-up vfs_inode and setattr functions

Cleanup code in v9fs vfs_inode as suggested by Alexey Dobriyan.  Did some
major revamping of the v9fs setattr code to remove unnecessary allocations and
clean up some dead-code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: Change error magic numbers to defined constants

Change magic error numbers to system defined constants in v9fs error.h As
suggested by Jan-Benedict Glaw.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: debug and support routines

This part of the patch contains debug and other misc routines.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: Support to force umount

Support for force umount

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: transport modules

This part of the patch contains transport routines.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: 9P protocol implementation

This part of the patch contains the 9P protocol functions.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: VFS superblock operations and glue

This part of the patch contains VFS superblock and mapping code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: VFS inode operations

This part of the patch contains the VFS inode interfaces.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: VFS file, dentry, and directory operations

This part of the patch contains the VFS file, dentry & directory interfaces.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v9fs: Documentation, Makefiles, Configuration

OVERVIEW

V9FS is a distributed file system for Linux which provides an
implementation of the Plan 9 resource sharing protocol 9P.  It can be
used to share all sorts of resources: static files, synthetic file servers
(such as /proc or /sys), devices, and application file servers (such as
FUSE).

BACKGROUND

Plan 9 (http://plan9.bell-labs.com/plan9) is a research operating
system and associated applications suite developed by the Computing
Science Research Center of AT&T Bell Laboratories (now a part of
Lucent Technologies), the same group that developed UNIX , C, and C++.
Plan 9 was initially released in 1993 to universities, and then made
generally available in 1995. Its core operating systems code laid the
foundation for the Inferno Operating System released as a product by
Lucent Bell-Labs in 1997. The Inferno venture was the only commercial
embodiment of Plan 9 and is currently maintained as a product by Vita
Nuova (http://www.vitanuova.com). After updated releases in 2000 and
2002, Plan 9 was open-sourced under the OSI approved Lucent Public
License in 2003.

The Plan 9 project was started by Ken Thompson and Rob Pike in 1985.
Their intent was to explore potential solutions to some of the
shortcomings of UNIX in the face of the widespread use of high-speed
networks to connect machines. In UNIX, networking was an afterthought
and UNIX clusters became little more than a network of stand-alone
systems. Plan 9 was designed from first principles as a seamless
distributed system with integrated secure network resource sharing.
Applications and services were architected in such a way as to allow
for implicit distribution across a cluster of systems. Configuring an
environment to use remote application components or services in place
of their local equivalent could be achieved with a few simple command
line instructions. For the most part, application implementations
operated independent of the location of their actual resources.

Commercial operating systems haven't changed much in the 20 years
since Plan 9 was conceived. Network and distributed systems support is
provided by a patchwork of middle-ware, with an endless number of
packages supplying pieces of the puzzle. Matters are complicated by
the use of different complicated protocols for individual services,
and separate implementations for kernel and application resources.
The V9FS project (http://v9fs.sourceforge.net) is an attempt to bring
Plan 9's unified approach to resource sharing to Linux and other
operating systems via support for the 9P2000 resource sharing
protocol.

V9FS HISTORY

V9FS was originally developed by Ron Minnich and Maya Gokhale at Los
Alamos National Labs (LANL) in 1997.  In November of 2001, Greg Watson
setup a SourceForge project as a public repository for the code which
supported the Linux 2.4 kernel.

About a year ago, I picked up the initial attempt Ron Minnich had
made to provide 2.6 support and got the code integrated into a 2.6.5
kernel.   I then went through a line-for-line re-write attempting to
clean-up the code while more closely following the Linux Kernel style
guidelines.  I co-authored a paper with Ron Minnich on the V9FS Linux
support including performance comparisons to NFSv3 using Bonnie and
PostMark - this paper appeared at the USENIX/FREENIX 2005
conference in April 2005:
( http://www.usenix.org/events/usenix05/tech/freenix/hensbergen.html ).

CALL FOR PARTICIPATION/REQUEST FOR COMMENTS

Our 2.6 kernel support is stabilizing and we'd like to begin pursuing
its integration into the official kernel tree.  We would appreciate any
review, comments, critiques, and additions from this community and are
actively seeking people to join our project and help us produce
something that would be acceptable and useful to the Linux community.

STATUS

The code is reasonably stable, although there are no doubt corner cases
our regression tests haven't discovered yet.  It is in regular use by several
of the developers and has been tested on x86 and PowerPC
(32-bit and 64-bit) in both small and large (LANL cluster) deployments.
Our current regression tests include fsx, bonnie, and postmark.

It was our intention to keep things as simple as possible for this
release -- trying to focus on correctness within the core of the
protocol support versus a rich set of features.  For example: a more
complete security model and cache layer are in the road map, but
excluded from this release.   Additionally, we have removed support for
mmap operations at Al Viro's request.

PERFORMANCE

Detailed performance numbers and analysis are included in the FREENIX
paper, but we show comparable performance to NFSv3 for large file
operations based on the Bonnie benchmark, and superior performance for
many small file operations based on the PostMark benchmark.   Somewhat
preliminary graphs (from the FREENIX paper) are available
(http://v9fs.sourceforge.net/perf/index.html).

RESOURCES

The source code is available in a few different forms:

tarballs: http://v9fs.sf.net
CVSweb: http://cvs.sourceforge.net/viewcvs.py/v9fs/linux-9p/
CVS: :pserver:anonymous@cvs.sourceforge.net:/cvsroot/v9fs/linux-9p
Git: rsync://v9fs.graverobber.org/v9fs (webgit: http://v9fs.graverobber.org)
9P: tcp!v9fs.graverobber.org!6564

The user-level server is available from either the Plan 9 distribution
or from http://v9fs.sf.net
Other support applications are still being developed, but preliminary
version can be downloaded from sourceforge.

Documentation on the protocol has historically been the Plan 9 Man
pages (http://plan9.bell-labs.com/sys/man/5/INDEX.html), but there is
an effort under way to write a more complete Internet-Draft style
specification (http://v9fs.sf.net/rfc).

There are a couple of mailing lists supporting v9fs, but the most used
is v9fs-developer@lists.sourceforge.net -- please direct/cc your
comments there so the other v9fs contibutors can participate in the
conversation.  There is also an IRC channel: irc://freenode.net/#v9fs

This part of the patch contains Documentation, Makefiles, and configuration
file changes.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] files: files locking doc

Add documentation describing the new locking scheme for file descriptor table.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] files: lock-free fd look-up

With the use of RCU in files structure, the look-up of files using fds can now
be lock-free.  The lookup is protected by rcu_read_lock()/rcu_read_unlock().
This patch changes the readers to use lock-free lookup.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Ravikiran Thirumalai <kiran_th@gmail.com>
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] files: files struct with RCU

Patch to eliminate struct files_struct.file_lock spinlock on the reader side
and use rcu refcounting rcuref_xxx api for the f_count refcounter.  The
updates to the fdtable are done by allocating a new fdtable structure and
setting files->fdt to point to the new structure.  The fdtable structure is
protected by RCU thereby allowing lock-free lookup.  For fd arrays/sets that
are vmalloced, we use keventd to free them since RCU callbacks can't sleep.  A
global list of fdtable to be freed is not scalable, so we use a per-cpu list.
If keventd is already handling the current cpu's work, we use a timer to defer
queueing of that work.

Since the last publication, this patch has been re-written to avoid using
explicit memory barriers and use rcu_assign_pointer(), rcu_dereference()
premitives instead.  This required that the fd information is kept in a
separate structure (fdtable) and updated atomically.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] files-sparc64-fix 2

Fix sparc64 timod to use the new files_fdtable() api to get the fd table.
This is necessary for RCUification.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] files: break up files struct

In order for the RCU to work, the file table array, sets and their sizes must
be updated atomically.  Instead of ensuring this through too many memory
barriers, we put the arrays and their sizes in a separate structure.  This
patch takes the first step of putting the file table elements in a separate
structure fdtable that is embedded withing files_struct.  It also changes all
the users to refer to the file table using files_fdtable() macro.  Subsequent
applciation of RCU becomes easier after this.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] files: rcuref APIs

Adds a set of primitives to do reference counting for objects that are looked
up without locks using RCU.

Signed-off-by: Ravikiran Thirumalai <kiran_th@gmail.com>
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] files: fix rcu initializers

First of a number of files_lock scaability patches.

 Here are the x86 numbers -

 tiobench on a 4(8)-way (HT) P4 system on ramdisk :

                                         (lockfree)
 Test            2.6.10-vanilla  Stdev   2.6.10-fd       Stdev
 -------------------------------------------------------------
 Seqread         1400.8          11.52   1465.4          34.27
 Randread        1594            8.86    2397.2          29.21
 Seqwrite        242.72          3.47    238.46          6.53
 Randwrite       445.74          9.15    446.4           9.75

 The performance improvement is very significant.
 We are getting killed by the cacheline bouncing of the files_struct
 lock here. Writes on ramdisk (ext2) seems to vary just too
 much to get any meaningful number.

 Also, With Tridge's thread_perf test on a 4(8)-way (HT) P4 xeon system :

 2.6.12-rc5-vanilla :

 Running test 'readwrite' with 8 tasks
 Threads     0.34 +/- 0.01 seconds
 Processes   0.16 +/- 0.00 seconds

 2.6.12-rc5-fd :

 Running test 'readwrite' with 8 tasks
 Threads     0.17 +/- 0.02 seconds
 Processes   0.17 +/- 0.02 seconds

 I repeated the measurements on ramfs (as opposed to ext2 on ramdisk in
 the earlier measurement) and I got more consistent results from tiobench :

 4(8) way xeon P4
 -----------------
                                         (lock-free)
 Test            2.6.12-rc5      Stdev   2.6.12-rc5-fd   Stdev
 -------------------------------------------------------------
 Seqread         1282            18.59   1343.6          26.37
 Randread        1517            7       2415            34.27
 Seqwrite        702.2           5.27    709.46           5.9
 Randwrite       846.86          15.15   919.68          21.4

 4-way ppc64
 ------------
                                         (lock-free)
 Test            2.6.12-rc5      Stdev   2.6.12-rc5-fd   Stdev
 -------------------------------------------------------------
 Seqread         1549            91.16   1569.6          47.2
 Randread        1473.6          25.11   1585.4          69.99
 Seqwrite        1096.8          20.03   1136            29.61
 Randwrite       1189.6           4.04   1275.2          32.96

 Also running Tridge's thread_perf test on ppc64 :

 2.6.12-rc5-vanilla
 --------------------
 Running test 'readwrite' with 4 tasks
 Threads     0.20 +/- 0.02 seconds
 Processes   0.16 +/- 0.01 seconds

 2.6.12-rc5-fd
 --------------------
 Running test 'readwrite' with 4 tasks
 Threads     0.18 +/- 0.04 seconds
 Processes   0.16 +/- 0.01 seconds

 The benefits are huge (upto ~60%) in some cases on x86 primarily
 due to the atomic operations during acquisition of ->file_lock
 and cache line bouncing in fast path. ppc64 benefits are modest
 due to LL/SC based locking, but still statistically significant.

This patch:

RCU head initilizer no longer needs the head varible name since we don't use
list.h lists anymore.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: tveeprom improved to support newer Hauppage cards

- tveeprom improved and updated to reflect newer Hauppage cards.
- CodingStyle fixes.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: TVaudio cleanup and better debug messages

- adds the adapter number + i2c address to printk msgs.
- Some CodingStyle cleanups.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: Remove kernel version dependency from tea575x-tuner.h

- Removed kernel version dependency from tea575x-tuner.h

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: include saa6588 compiler option and files / fixes comments on tuner.h

- Include saa6588 compiler option and files.
- Fix comment on tuner.h
- linux/utsname.h replaced by linux/version.h to compile on vanilla 2.6.13

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: make the input event device for IR matchable by udev rules.

- Makes the input event device created by the V4L drivers for the
  infrared remote matchable by udev rules.

Signed-off-by: Rudo Thomas <rudo@matfyz.cz>
Signed-off-by: Michael Fair <michael@daclubhouse.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: add some missing parameter descriptions in msp3400.c

- added some missing parameter descriptions at msp3400.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: print warning if pal= or secam= argument is unrecognized

- print warning if pal= or secam= argument is unrecognized

Signed-off-by: Philip Rowlands <phr@doc.ic.ac.uk>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: correct the amux for composite and s-video inputs on the Sabrent SBT-TVFM card.

- correct the amux for composite and s-video inputs on the Sabrent SBT-TVFM
  card.

Signed-off-by: Michael Rodriquez-Torrent <mike@themikecam.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: #include <linux/config.h> no longer needed.

- #include <linux/config.h> no longer needed.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: the Microtune 4049FM5 uses an IF frequency of 33.3 MHz for FM radio.

- The Microtune 4049FM5 uses an IF frequency of 33.3 MHz for FM radio.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: some error treatment implemented at resume functions.

- Some error treatment implemented at resume functions.

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: change LG TDVS H062F from NTSC to ATSC

- Change LG TDVS H062F from NTSC to ATSC.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: normalize whitespace and comments in tuner lists

- normalize whitespace and comments in tuner lists

Signed-off-by: Philip Rowlands <phr@doc.ic.ac.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: cx88-dvb incorrect reporting fixed and remove bad PCI ID for Sabrent

- cx88-dvb has been incorrectly reporting the card name instead of frontend name
- Removes a bad PCI subsystem ID for saa713x Sabrent card
- Renames DVICO --> DViCO for bttv.
- #include <linux/config.h> no longer needed.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: add saa713x card #66: Yuan TUN-900 (saa7135)

- Add saa713x card #66: Yuan TUN-900 (saa7135)

Signed-off-by: De Greef Sebastien <sebdg@hotmail.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: add saa713x card #65 Kworld V-Stream Studio TV Terminator

- Add saa713x card #65 Kworld V-Stream Studio TV Terminator

Signed-off-by: James R Webb <jrwebb@qwest.net>
Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: correct LG NTSC TALN mini tuner takeover

- correct LG NTSC TALN mini tuner takeover as far we can
  empirically determine for now.

Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: syncs tveeprom tuners list with the list from ivtv

- Syncs tveeprom tuners list with the list from ivtv.
- Fixes the incorrect reporting of the radio presence.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: change the prefix of msp34xx and error while reading chip version

- Changes the prefix to 'msp34xx' instead of 'msp3400'.
- Changes the message 'error while reading chip version' to a debug printk at
   msp3400.c

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: SAA7134 updates and board additions

- Remove $Id CVS logs for V4L files
- linux/version.h replaced by linux/utsname.h
- Add new Digimatrix card and LG TAPC Mini tuner for it

Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: CX88 updates and card additions

- Remove $Id CVS logs for V4L files
- add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to
  cx88-blackbird.c.
- declare the indirection hooks from cx88-blackbird.c.
- dcprintk macro which uses core instead of dev->core on cx88-video.c.
- replace dev->core occurances with core on cx88-video.c.
- CodingStyle fixes.
- MaxInput replaced by a define.
- cx8801 structures moved from cx88.h.
- The output_mode needs to be set for the Hauppauge Nova-T DVB-T
  for versions after 2.6.12.
- Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite.
- Updated DViCO FusionHDTV5 Gold & added DVB support.
- Fixed DViCO FusionHDTV 3 Gold-Q GPIO.
- Some clean up in cx88-tvaudio.c
- replaced hex values when writing to AUD_CTL to EN_xx for better reading.
- Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC.
- Support for stereo NICAM and BTSC improved.
- Broken stereo check removed.
- Added support for remote control to Cinergy DVBT-1400.
- local var renamed from rc5 to a better name (ircode).
- LGDT330X QAM lock bug fixes.
- Some reorg: move some bits to struct cx88_core, factor out common ioctl's
  to cx88_do_ioctl.
- Get rid of '//' comments, replace them with #if 0 and /**/.
- Minor clean-ups: remove dcprintk and replace all instances of "dev->core"
  with "core".
- Added some registers to control PCI controller at CX2388x chips.
- New tuner standby API.
- Small mpeg fixes and cleanups for blackbird.
- fix mpeg packet size & count
- add VIDIOC_QUERYCAP ioctl for the mpeg stream
- return more information in struct v4l2_format
- fix default window height
- small cleanups

Signed-off-by: Uli Luckas <luckas@musoft.de>
Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Catalin Climov <catalin@climov.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: BTTV updates and card additions

- Remove $Id CVS logs for V4L files
- Added DVICO FusionHDTV 5 Lite card.
- Added Acorp Y878F.
- CodingStyle fixes.
- Added tuner_addr to bttv cards structure.
- linux/version.h replaced by linux/utsname.h on bttvp.h
- kernel module for acquiring RDS data from a SAA6588.
- Allow multiple open() and reading calls to /dev/radio on bttv-driver.c
- added i2c address for lgdt330x.

Signed-off-by: Hans J. Koch <koch@hjk-az.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] v4l: common part Updates and tuner additions

- Remove $Id CVS logs for V4L files
- Included newer cards.
- Added a new NEC protocol for ir based on pulse distance.
- Enable ATSC support for DViCO FusionHDTV5 Gold.
- Added tuner LG NTSC (TALN mini series).
- Fixed tea5767 autodetection.
- Resolve more tuner types.
- Commented debug function removed from mainstream.
- Remove comments from mainstream. Still on development tree.
- linux/version dependencies removed.
- BTSC Lang1 now is set to auto_stereo mode.
- New tuner standby API.
- i2c-core.c uses hexadecimal for the i2c address, so it should stay consistent.

Signed-off-by: Uli Luckas <luckas@musoft.de>
Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] VIDEO_BT848: remove not required part of the help text

Things that are already expressed through the dependencies don't have to be
mentioned in the help text.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Cc: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Numa-aware slab allocator V5

The NUMA API change that introduced kmalloc_node was accepted for
2.6.12-rc3.  Now it is possible to do slab allocations on a node to
localize memory structures.  This API was used by the pageset localization
patch and the block layer localization patch now in mm.  The existing
kmalloc_node is slow since it simply searches through all pages of the slab
to find a page that is on the node requested.  The two patches do a one
time allocation of slab structures at initialization and therefore the
speed of kmalloc node does not matter.

This patch allows kmalloc_node to be as fast as kmalloc by introducing node
specific page lists for partial, free and full slabs.  Slab allocation
improves in a NUMA system so that we are seeing a performance gain in AIM7
of about 5% with this patch alone.

More NUMA localizations are possible if kmalloc_node operates in an fast
way like kmalloc.

Test run on a 32p systems with 32G Ram.

w/o patch
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      485.36  100       485.3640     11.99      1.91   Sat Apr 30 14:01:51 2005
  100    26582.63   88       265.8263     21.89    144.96   Sat Apr 30 14:02:14 2005
  200    29866.83   81       149.3342     38.97    286.08   Sat Apr 30 14:02:53 2005
  300    33127.16   78       110.4239     52.71    426.54   Sat Apr 30 14:03:46 2005
  400    34889.47   80        87.2237     66.72    568.90   Sat Apr 30 14:04:53 2005
  500    35654.34   76        71.3087     81.62    714.55   Sat Apr 30 14:06:15 2005
  600    36460.83   75        60.7681     95.77    853.42   Sat Apr 30 14:07:51 2005
  700    35957.00   75        51.3671    113.30    990.67   Sat Apr 30 14:09:45 2005
  800    33380.65   73        41.7258    139.48   1140.86   Sat Apr 30 14:12:05 2005
  900    35095.01   76        38.9945    149.25   1281.30   Sat Apr 30 14:14:35 2005
 1000    36094.37   74        36.0944    161.24   1419.66   Sat Apr 30 14:17:17 2005

w/patch
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.27  100       484.2736     12.02      1.93   Sat Apr 30 15:59:45 2005
  100    28262.03   90       282.6203     20.59    143.57   Sat Apr 30 16:00:06 2005
  200    32246.45   82       161.2322     36.10    282.89   Sat Apr 30 16:00:42 2005
  300    37945.80   83       126.4860     46.01    418.75   Sat Apr 30 16:01:28 2005
  400    40000.69   81       100.0017     58.20    561.48   Sat Apr 30 16:02:27 2005
  500    40976.10   78        81.9522     71.02    696.95   Sat Apr 30 16:03:38 2005
  600    41121.54   78        68.5359     84.92    834.86   Sat Apr 30 16:05:04 2005
  700    44052.77   78        62.9325     92.48    971.53   Sat Apr 30 16:06:37 2005
  800    41066.89   79        51.3336    113.38   1111.15   Sat Apr 30 16:08:31 2005
  900    38918.77   79        43.2431    134.59   1252.57   Sat Apr 30 16:10:46 2005
 1000    41842.21   76        41.8422    139.09   1392.33   Sat Apr 30 16:13:05 2005

These are measurement taken directly after boot and show a greater
improvement than 5%.  However, the performance improvements become less
over time if the AIM7 runs are repeated and settle down at around 5%.

Links to earlier discussions:
http://marc.theaimsgroup.com/?t=111094594500003&r=1&w=2
http://marc.theaimsgroup.com/?t=111603406600002&r=1&w=2

Changelog V4-V5:
- alloc_arraycache and alloc_aliencache take node parameter instead of cpu
- fix initialization so that nodes without cpus are properly handled.
- simplify code in kmem_cache_init
- patch against Andrews temp mm3 release
- Add Shai to credits
- fallback to __cache_alloc from __cache_alloc_node if the node's cache
  is not available yet.

Changelog V3-V4:
- Patch against 2.6.12-rc5-mm1
- Cleanup patch integrated
- More and better use of for_each_node and for_each_cpu
- GCC 2.95 fix (do not use [] use [0])
- Correct determination of INDEX_AC
- Remove hack to cause an error on platforms that have no CONFIG_NUMA but nodes.
- Remove list3_data and list3_data_ptr macros for better readability

Changelog V2-V3:
- Made to patch against 2.6.12-rc4-mm1
- Revised bootstrap mechanism so that larger size kmem_list3 structs can be
  supported. Do a generic solution so that the right slab can be found
  for the internal structs.
- use for_each_online_node

Changelog V1-V2:
- Batching for freeing of wrong-node objects (alien caches)
- Locking changes and NUMA #ifdefs as requested by Manfred

Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Shai Fultheim <Shai@Scalex86.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: add pcmcia to IRQ information

Add a devname parameter to the pcmcia_device structure, fills it with
"pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in
pcmcia_request_irq.

Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: more IDs for ide_cs

(Partly From: David Brownell <dbrownell@users.sourceforge.net> )

Make ID-CS recognize the CF card manufacturer records for Samsung, Lexar and
STI.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: OMAP CF controller

This adds a socket driver for the OMAP CF controller; it's currently in use on
OSK boards.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: remove unused Vpp1, Vpp2 and Vcc

config_t->Vpp1, Vpp2 and Vcc are never read, so remove them.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: remove unused client_t

client_t and CLIENT_MAGIC are unused, so remove them

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia/yenta: avoid PCI write posting problem

extend cb_writel(), exca_writeb(), exca_writel() to do a read[lb]() after
the write[lb]() to avoid possible problem with PCI write posting.

Seems to fix Bug #5061.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix pcmcia_request_irq() for multifunction card

multifunction cards need to have the same irq assigned to both functions.
the code tries that but fails because ret is still set to CS_IN_USE which
results in the function having the CB irq assigned.  yenta_set_socket then
just changes the irq routing to use the PCI interrupt but the first
functions irq handler is registered on an ISA interrupt.  boom.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia/cs: fix possible missed wakeup

- thread_done should only be completed when the wait_queue is installed.

- all wake up conditions should be checked before schedule()

this fixes a hang of rmmod in the sequence modprobe yenta_socket; rmmod
yenta_socket as reported by Andreas Steinmetz.  w/o this rmmod yenta_socket
can hang on wait_for_completion() in pcmcia_unregister_socket()

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] yenta: share code with PCI core

Share code between setup-bus.c and yenta_socket.c: use the write-out code of
resources to the bridge also in yenta_socket.c, as it provides useful debug
output.  In addition, it fixes the bug that the CPU-centric resource view
might need to be transferred to the PCI-centric view: setup-bus.c does that,
while yenta-socket.c did not.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pcmcia: reduce ds.c stack footprint

This patch reduces the stack footprint of pcmcia_device_query() from 416 bytes
to 36 bytes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttusb-budget: use time_after_eq()

Use of the time_after_eq() macro, defined at linux/jiffies.h, which deal
with wrapping correctly and are nicer to read.

Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: saa7146: i2c vs. sysfs fix

Integrate saa7146_i2c adapter into device model:
Moves entries from /sys/device/platform to /sys/device/pci*.

Signed-off-by: Philipp Hahn <pmhahn@titan.lahn.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: add PCI ids for old Siemens/TT DVB-C card

Add PCI-ids of Siemens-DVB-C card with Technotrend manufacturer id.

Signed-off-by: Karl Herz <karl.herz@gmx.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ttpci: av7110: RC5+ remote control support

Improved remote control support for av7110-based cards:
o extended rc5 protocol, firmware >= 0x2620 required
o key-up timer slightly adjusted
o completely moved remote control code to av7110_ir.c
o support for multiple ir receivers
o for now, all av7110 cards share the same ir configuration and event device

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: av7110: conditionally disable workaround for broken firmware

Disable COM_IF_LOCK workaround for firmware > 0x261f.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: av7110: disable superflous firmware handshake

Disable superflous firmware handshake.

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: budget-av: enable frontend on KNC1 Plus cards

Enable frontend on KNC plus cards.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: budget-av: fixes for CI interface

Fixes for CI interface.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: budget-ci: add support for TT DVB-C CI card

Add support for TT DVB-C CI card.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: av7110: Siemens DVB-C analog video input support

Add support for analog video inputs (CVBS and Y/C) of the
analog module for the Siemens DVB-C card.

Signed-off-by: thomas schorpp <t.schorpp@gmx.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: cinergyT2: remote control fixes

IR RC fixes:
- EVIOCSKEYCODE is not supported by this driver, fix potential crash
  when it is used by not setting rc_input_dev->keycodesize
- fix key repeat handling (hopefully)
- reduce default poll internal to 50msec (necessary for key repeat handling)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dst: Updated Documentation

Updated Documentation

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dst: ci doc update

Updated documentation

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dst: fix DVB-C tuning

Fix BUG in DVB-C frequency setting.  Thanks to Peng Cao <caopeng75@gmail.com>

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dst: identify boards

Identify board properly: Add functions to retrieve MAC Address, FW details,
Card type and Vendor Information.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dst: dprrintk cleanup

Code Cleanup:
o Remove debug noise
o Remove debug module parameter
  debug level is achieved using the verbosity level
o Updated to kernel coding style
  (case labels should not be indented)

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dst: remove unnecessary code

Code Simplification: CA PMT object is not parsed in the driver anymore.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dst: fix symbol rate setting

Make the Symbolrate setting card specific.

Signed-off-by: Manu Abraham <manu@kromtek.com>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: nebula DigiTV nxt6000 fix

Fix bug in Nebula DigiTV frontend detection for nxt6000.

Signed-off-by: Stuart Auchterlonie <stuarta@squashedfrog.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: bt8xx: Nebula DigiTV mt352 support

Add support for Nebula DigiTV PCI cards with the MT352 frontend.

Signed-off-by: David Johnson <dj@david-web.co.uk>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: bt8xx: cleanup

Indentation fixes and remove unnecessary braces.

Signed-off-by: David Johnson <dj@david-web.co.uk>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: bt8xx: endianness fix

Endianness fix for risc DMA start address setting.  (reported by Stefan
Haubenthal/Peter Hettkamp)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: remove noisy debug print

comment out noisy dprintk in dst_get_signal() (why are errors only visible
with debug on?  this needs to be cleaned up so we can disable debug by
default)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: cxusb: fixes for new firmware

This patch changes two things:

1) a firmware update made by the vendor, which has to be done in Windows
   for now, changes the DVB-data-pipe from isochronous to bulk: it fixes the
   data distortions (and thus the video-distortions) in DVB-T mode; there is
   no backwards compatibility with the old firmware as it didn't work anyway

2) with the help of Steve Toth some reverse-engineered functionality is now
   named correctly, thank you

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: white space cleanup

white space cleanup

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: digitv: support for nxt6000 demod

Add support for the NXT6000-based digitv-box.  Add .get_tune_settings callback
for the NXT6000 to have a min_tune_delay of 500ms.

Signed-off-by: Svante Olofsson <svante@agentum.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: core: change dvb_usb_device_init() API

Change the init call to optionally return the new dvb_usb_device directly.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: dtt200u: add proper device names

Added names for clones of the DVB-T stick.
Whitespace cleanups.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: dtt200u: copy frontend_ops before modifying

Fix: copy frontend_ops before modifying

Signed-off-by: Ye Jianjun (Joey) <joeyye@trident.com.cn>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: removed empty module_init/exit calls

Removed empty module_init/exit calls.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: dibusb: Kworld Xpert DVB-T USB2.0 support

Add USB IDs of the Kworld Xpert DVB-T USB2.0 (clone of the ADStech box).
Thanks to Marcus Hagn for testing.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: usb: add TwinhanDTV StarBox support

Add driver for the TwinhanDTV StarBox and clones.

Thanks to Ralph Metzler for his initial work on this box and thanks to Twinhan
for their support.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: frontend: or51132: remove bogus optimization attempt

This fix has also been applied to lgdt330x.  There is an optimization that
keeps track of the frequency tuned by the digital decoder.  The digital driver
does not set the frequency if it has not changed since it was tuned.  The
analog tuner driver knows nothing about the frequency saved by the digital
driver.  When the frequency is set using the video4linux code with tvtime, the
hardware get changed but the digital driver's state does not get updated.
Switch back to the same digital channel and the driver finds no change in
frequency so the tuner is not reset to the digital frequency.  The work around
is to remove the check and always set the tuner to the specified frequency.

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: frontend: stv0297: QAM128 tuning improvement

while investigating the QAM_128-issue with the stv0297-driver for the
Cablestar (which is not the same as the one in dvb-kernel CVS, yet), I fixed
it, not by increasing the timeout, but by disabling the corner-detection for
QAM_128 and higher.

This patch has been tested on dvb-kernel cvs, and has been reported to work by
multiple users.  Some cards still need timeout increase on top of this patch.
This will be addressed later.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>