perf/x86/intel: Add INST_RETIRED.ALL workarounds

On Broadwell INST_RETIRED.ALL cannot be used with any period
that doesn't have the lowest 6 bits cleared. And the period
should not be smaller than 128.

This is erratum BDM11 and BDM55:

  http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/5th-gen-core-family-spec-update.pdf

BDM11: When using a period < 100; we may get incorrect PEBS/PMI
interrupts and/or an invalid counter state.
BDM55: When bit0-5 of the period are !0 we may get redundant PEBS
records on overflow.

Add a new callback to enforce this, and set it for Broadwell.

How does this handle the case when an app requests a specific
period with some of the bottom bits set?

Short answer:

Any useful instruction sampling period needs to be 4-6 orders
of magnitude larger than 128, as an PMI every 128 instructions
would instantly overwhelm the system and be throttled.
So the +-64 error from this is really small compared to the
period, much smaller than normal system jitter.

Long answer (by Peterz):

IFF we guarantee perf_event_attr::sample_period >= 128.

Suppose we start out with sample_period=192; then we'll set period_left
to 192, we'll end up with left = 128 (we truncate the lower bits). We
get an interrupt, find that period_left = 64 (>0 so we return 0 and
don't get an overflow handler), up that to 128. Then we trigger again,
at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get
an overflow). We increment with sample_period so we get left = 128. We
fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an
overflow). And on and on.

So while the individual interrupts are 'wrong' we get then with
interval=256,128 in exactly the right ratio to average out at 192. And
this works for everything >=128.

So the num_samples*fixed_period thing is still entirely correct +- 127,
which is good enough I'd say, as you already have that error anyhow.

So no need to 'fix' the tools, al we need to do is refuse to create
INST_RETIRED:ALL events with sample_period < 128.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
[ Updated comments and changelog a bit. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424225886-18652-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Add Broadwell core support

Add Broadwell support for Broadwell to perf.

The basic support is very similar to Haswell. We use the new cache
event list added for Haswell earlier. The only differences
are a few bits related to remote nodes. To avoid an extra,
mostly identical, table these are patched up in the initialization code.

The constraint list has one new event that needs to be handled over Haswell.

Includes code and testing from Kan Liang.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424225886-18652-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Add new cache events table for Haswell

Haswell offcore events are quite different from Sandy Bridge.
Add a new table to handle Haswell properly.

Note that the offcore bits listed in the SDM are not quite correct
(this is currently being fixed). An uptodate list of bits is
in the patch.

The basic setup is similar to Sandy Bridge. The prefetch columns
have been removed, as prefetch counting is not very reliable
on Haswell. One L1 event that is not in the event list anymore
has been also removed.

- data reads do not include code reads (comparable to earlier Sandy Bridge tables)
- data counts include speculative execution (except L1 write, dtlb, bpu)
- remote node access includes both remote memory, remote cache, remote mmio.
- prefetches are not included in the counts for consistency
  (different from Sandy Bridge, which includes prefetches in the remote node)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
[ Removed the HSM30 comments; we don't have them for SNB/IVB either. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424225886-18652-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Show the first event with an invalid filter (David Ahern, Arnaldo Carvalho de Melo)

  - Fix garbage output when intermixing syscalls from different threads in 'perf trace' (Arnaldo Carvalho de Melo)

  - Fix 'perf timechart' SIBGUS error on sparc64 (David Ahern)

Infrastructure changes:

  - Set JOBS based on CPU or processor, making it work on SPARC, where
    /proc/cpuinfo has "CPU", not "processor" (David Ahern)

  - Zero should not be considered "not found" in libtraceevent's eval_flag() (Steven Rostedt)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

tools lib traceevent: Zero should not be considered "not found" in eval_flag()

Guilherme Cox found that:

 There is, however, a potential bug if there is an item with code zero
 that is not the first one in the symbol list, since eval_flag(..)
 returns 0 when it doesn't find anything.

That is, if you have the following enums:

enum {
  FOO_START = 0,
  FOO_GO    = 1,
  FOO_END   = 2
}

and then have:

  __print_symbolic(foo, FOO_GO, "go", FOO_START, "start",
        FOO_END, "end")

If none of the enums are known to pevent, then eval_flag() will return
zero, and it will match it to the first item in the list, which would be
FOO_GO, which is not zero.

Luckily, in most cases, the first element would be zero, and the parsing
would match out of sheer luck.

Reported-by: Guilherme Cox <cox@computer.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324145813.0bfe95ba@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Fix syscall enter formatting bug

 commit e596663ebb28a068f5cca57f83285b7b293a2c83
 Author: Arnaldo Carvalho de Melo <acme@redhat.com>
 Date:   Fri Feb 13 13:22:21 2015 -0300

    perf trace: Handle multiple threads better wrt syscalls being intermixed

Introduced a bug where it considered the number of bytes output directly
to the output file when formatting the syscall entry buffer that is
stored to be finally printed at syscall exit, ending up leaving garbage
at the start of syscalls that appeared while another syscall was being
processed, in another thread. Fix it.

Example of garbage in the output before this patch:

 4280.102 (  0.000 ms): lsmd/763  ... [continued]: select()) = 0 Timeout
 4280.107 (275.250 ms): tuned/852 select(tvp: 0x7f41f7ffde50        ) ...
 4280.109 (  0.002 ms): lsmd/763 Xl��                                ) = -10
 4639.197 (  0.000 ms): systemd-journa/542  ... [continued]: epoll_wait()) = 1
 4639.202 (359.088 ms): lsmd/763 select(n: 6, inp: 0x7ffff21daad0, tvp: 0x7ffff21daac0) ...
 4639.207 (  0.005 ms): systemd-journa/542 Hn��                      ) = 106
 4639.221 (  0.002 ms): systemd-journa/542 uname(name: 0x7ffdbaed8e00) = 0
 4639.271 (  0.008 ms): systemd-journa/542 ftruncate(fd: 11</run/log/journal/60cd52417cf440a4a80107518bbd3c20/system.journal>, length: 50331648) = 0

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9ckfe8mvsedgkg6y80gz1ul8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Set JOBS based on CPU or processor

Number of JOBS to use is set automatically to the number of processors found
in /proc/cpuinfo. SPARC uses 'CPU' lines rather than 'processor'. Update the
check in perf's Makefile to work for SPARC.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1427213455-127249-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf: Bump max number of cpus to 1024

SPARC based systems currently support up to 1024 cpus (e.g. T5-8).
Allow perf to work on those systems.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1427213438-127216-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evlist: Return the first evsel with an invalid filter in apply_filters()

Use of a bad filter currently generates the message:
 Error: failed to set filter with 22 (Invalid argument)

Add the event name to make it clear to which event the filter
failed to apply:
  Error: Failed to set filter "foo" on event sched:sg_lb_stats: 22: Invalid argument

To test it use something like:

 # perf record -e sched:sched_switch -e sched:*fork --filter parent_pid==1 -e sched:*wait* --filter bla usleep 1
  Error: failed to set filter "bla" on event sched:sched_stat_iowait with 22 (Invalid argument)
 #

Based-on-a-patch-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d7gq2fjvaecozp9o2i0siifu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf timechart: Fix SIBGUS error on sparc64

perf timechart -T on sparc64 is terminating due to SIGBUS. Backtrace:

Program received signal SIGBUS, Bus error.
0x0000000000173d7c in perf_evsel__intval (evsel=<value optimized out>, sample=0x7feffffda28, name=0x289b28 "prev_state")
    at util/evsel.c:1918
1918 util/evsel.c: No such file or directory.
in util/evsel.c
Missing separate debuginfos, use: debuginfo-install audit-libs-2.3.7-1.0.1.el6.sparc64 bzip2-libs-1.0.5-7.el6_0.sparc64 elfutils-libelf-0.155-2.0.3.el6.sparc64 elfutils-libs-0.155-2.0.3.el6.sparc64 glibc-2.12-1.132.0.8.el6_5.sparc64 numactl-2.0.7-8.el6.sparc64 python-libs-2.6.6-52.0.2.el6.sparc64 slang-2.2.1-1.el6.sparc64 xz-libs-4.999.9-0.3.beta.20091007git.el6.sparc64 zlib-1.2.3-29.el6.sparc64
(gdb) bt
0  0x0000000000173d7c in perf_evsel__intval (evsel=<value optimized out>, sample=0x7feffffda28,
    name=0x289b28 "prev_state") at util/evsel.c:1918
1  0x0000000000123b94 in process_sample_sched_switch (tchart=0x7feffffe040, evsel=0x4ca850, sample=0x7feffffda28,
    backtrace=0xc39010 "") at builtin-timechart.c:627
2  0x0000000000122828 in process_sample_event (tool=0x7feffffe040, event=<value optimized out>, sample=0x7feffffda28,
    evsel=0x4ca850, machine=0x4c9c88) at builtin-timechart.c:569

Another extended load on unaligned pointer. As before fix by copying to
a temporary variable using memcpy.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1427228049-51893-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Improve support of compressed kernel modules (Jiri Olsa)

  - Add --kallsyms option to 'perf diff' (David Ahern)

  - Add pid/tid filtering to 'report' and 'script' commands (David Ahern)

  - Add support for __print_array() in libtraceevent (Javi Merino)

  - Save DSO loading errno to better report errors (Arnaldo Carvalho de Melo)

  - Fix 'probe' to get ummapped symbol address on kernel (Masami Hiramatsu)

  - Print big numbers using thousands' group in 'kmem' (Namhyung Kim)

  - Remove (null) value of "Sort order" for perf mem report (Yunlong Song)

Infrastructure changes:

  - Handle NULL comm name in libtracevent (Josef Bacik)

  - Libtraceevent synchronization with trace-cmd repo (Steven Rostedt)

  - Work around lack of sched_getcpu() in glibc < 2.6. (Vinson Lee)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Add pid/tid filtering to report and script commands

The 'record' and 'top' tools already allow a user to specify a CSV of
pids and/or tids of tasks to collect data.

Add those options to the 'report' and 'script' analysis commands to only
consider samples related to the given pids/tids.

This is also inline with the existing comm option.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1427212361-7066-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf diff: Add kallsyms option

Required for off-box analysis to convert kernel addresses.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1427212317-7018-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Add support for __print_array()

Since 6ea22486ba46 ("tracing: Add array printing helper") trace can
generate traces with variable element size arrays.  Add support to
parse them.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1427195239-15730-1-git-send-email-javi.merino@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Free filter tokens in process_filter()

valgrind showed that the filter token wasn't being freed properly in
process_filter().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.817723903@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Add way to find sub buffer boundary

For debugging purposes, it may be helpful for the kbuffer library to flag
when crossing a sub buffer.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.650983637@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent kbuffer: Remove extra update to data pointer in PADDING

When a event PADDING is hit (a deleted event that is still in the ring
buffer), translate_data() sets the length of the padding and also updates
the data pointer which is passed back to the caller.

This is unneeded because the caller also updates the data pointer with
the passed back length. translate_data() should not update the pointer,
only set the length.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org # 3.12+
Link: http://lkml.kernel.org/r/20150324135923.461431960@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Make plugin options either string or boolean

When a plugin option is defined, by default it is a boolean (true or false).

If the option is something else, then it needs to set its "value" field to
a default string other than NULL (can be just "").

If the value is not set then the option is considered boolean, and the
updating of the option value will be handled accordingly.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.308372986@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Add pevent_data_pid_from_comm()

There is a pevent_data_comm_from_pid() that returns the cmdline stored for
a given pid in order for users to map pids to comms, but there's no method
to convert a comm back to a pid. This is useful for filters that specify
a comm instead of a PID (it's faster than searching each individual event).

Add a way to retrieve a comm from a pid. Since there can be more than one
pid associated to a comm, it returns a data structure that lets the user
iterate over all the saved comms for a given pid.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.001103479@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Handle %z in bprint format

The %z printf specifier was not handled making trace_printk()s in the
kernel that used this break on output.

Reported-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Link: http://lkml.kernel.org/r/20150324135922.844361717@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Copy trace_clock and free it

The pevent->trace_clock should not be a direct pointer to what was
given. It should be copied and freed.

Note, valgrind pointed this out when a caller passed in a pointer that
needed to be freed and it never was. Ideally, pevent should copy it
(which this change does), and free the copy. It's up to the caller to
free the clock string passed in.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135922.695906738@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Handle NULL comm name

It is possible that a pid has no associated comm attached to it, although it
can still be passed to pevent_register_comm().

But if comm is NULL, it will cause strdup() to segfault. To prevent this
from happening, if comm is NULL use the default "<...>" name for the
pid.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135922.549965495@goodmis.org
Link: http://lkml.kernel.org/p/1403799732-30308-1-git-send-email-jbacik@fb.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Save DSO loading errno to better report errors

Before, when some problem happened while trying to load the kernel
symtab, 'perf top' would show:

      ┌─Warning:───────────────────────────┐
      │The vmlinux file can't be used.     │
      │Kernel samples will not be resolved.│
      │                                    │
      │                                    │
      │Press any key...                    │
      └────────────────────────────────────┘

Now, it reports:

  # perf top --vmlinux /dev/null

      ┌─Warning:───────────────────────────────────────────┐
      │The /tmp/passwd file can't be used: Invalid ELF file│
      │Kernel samples will not be resolved.                │
      │                                                    │
      │                                                    │
      │Press any key...                                    │
      └────────────────────────────────────────────────────┘

This is possible because we now register the reason for not being able
to load the symtab in the dso->load_errno member, and provide a
dso__strerror_load() routine to format this error into a strerror like
string with a short reason for the error while loading.

That can be just forwarding the dso__strerror_load() call to
strerror_r(), or, for a separate errno range providing a custom message.

Reported-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u5rb5uq63xqhkfb8uv2lxd5u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf target: Simplify handling of strerror_r return

To deal with forwarding the strerror_r (GNU) return we need to check if
the returned value is the buffer we passed or maybe some constant
(unknown error), simplify that action by using scnprintf, that will do
all the buflen size checks, trimming if needed.

Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d0ik6i5gjew56j0qphql28ou@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Work around lack of sched_getcpu in glibc < 2.6.

This patch fixes this build error with glibc < 2.6.

  CC       util/cloexec.o
cc1: warnings being treated as errors
util/cloexec.c: In function ‘perf_flag_probe’:
util/cloexec.c:24: error: implicit declaration of function
‘sched_getcpu’
util/cloexec.c:24: error: nested extern declaration of ‘sched_getcpu’
make: *** [util/cloexec.o] Error 1

Signed-off-by: Vinson Lee <vlee@twitter.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: stable@vger.kernel.org # 3.18+
Link: http://lkml.kernel.org/r/1427137761-16119-1-git-send-email-vlee@twopensource.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf kmem: Print big numbers using thousands' group

Like perf stat, this makes easy to read the numbers on stat like below:

  # perf kmem stat

  SUMMARY
  =======
  Total bytes requested: 9,770,900
  Total bytes allocated: 9,782,712
  Total bytes wasted on internal fragmentation: 11,812
  Internal fragmentation: 0.120744%
  Cross CPU allocations: 74/152,819

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1427092244-22764-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Factor out allocating and processing args

The sequence of allocating the print_arg field, calling process_arg()
and verifying that the next event delimiter is repeated twice in
process_hex() and will also be used for process_int_array().

Factor it out to a function to avoid writing the same code again and
again.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1426875176-30244-2-git-send-email-javi.merino@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Fix to get ummapped symbol address on kernel

Fix to get correctly unmapped symbol address on kernel.  This allows us
to probe on syscall symbols which are aliases of SyS_ functions with
using debuginfo.

Without this fix:
  ----
  # ./perf probe -a sys_write
  Failed to find debug information for address 3b0100
  Probe point 'sys_write' not found.
    Error: Failed to add events.
  ----
The address 0x3b0100 is a mapped address, and not usable
in debuginfo.

With this fix:
  ----
  # ./perf probe -a sys_write
  Added new event:
    probe:sys_write      (on sys_write)

  You can now use it in all perf tools, such as:

          perf record -e probe:sys_write -aR sleep 1
  ----

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150322114022.32639.19096.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Remove (null) value of "Sort order" for perf mem report

When '--sort' is not set, 'perf mem report" will print a null pointer as
the output value of sort order, so fix it.

Example:

Before this patch:

 $ perf mem report
 # To display the perf.data header info, please use --header/--header-only options.
 #
 # Samples: 18  of event 'cpu/mem-loads/pp'
 # Total weight : 188
 # Sort order   : (null)
 #
 ...

After this patch:

 $ perf mem report
 # To display the perf.data header info, please use --header/--header-only options.
 #
 # Samples: 18  of event 'cpu/mem-loads/pp'
 # Total weight : 188
 # Sort order   : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
 #
 ...

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427082605-12881-1-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Allow annotation for decompressed kernel modules

Decompressing kernel module file for objdump command if needed.
Annotation commands now display annotation for compressed kernel
modules.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x4jcytk2d5qjmnjvb0w75q3f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Try to lookup kernel module map before creating one

Currently we assume machine__new_module is called only once for each
module so we create its map&dso unconditionally.

However it's possible that it's called multiple times for same module.
Like for perf record:

  1) via machine__create_module during machine init
  2) via kernel MMAP event processing

Trying to lookup kernel module map before creating one.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kx76xfqpnrpho5hdaapbqm09@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Remove is_kmodule_extension function

Because it's no longer needed.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bb84vlg76t78q8y8fdeed2qn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Remove compressed argument from is_kernel_module

We no longer need the 'compressed' argument, because all
current users use 'NULL' for it.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d72q2s7ggbmy2yzhumux4zzw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Use kmod_path__parse in is_kernel_module

Replacing the current parsing code with kmod_path__parse function call.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r9mpbbgkp39wp1cdmv13ddq0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Use kmod_path__parse in decompress_kmodule

Replacing the file name parsing with kmod_path__parse.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zpyyitlte7lwe2ywi51rj4n5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Use kmod_path__parse in map_groups__set_modules_path_dir

Replacing the file name parsing with kmod_path__parse
and moving the dso update into new separate function.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q0ed76ajcyoaofotntrg5sla@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-2' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

  - Handle legacy syscalls tracepoints (David Ahern, Arnaldo Carvalho de Melo)

  - Indicate which callchain entries are annotated in the
    TUI hists browser (report/top) (Arnaldo Carvalho de Melo)

  - Fix failure to add multiple probes without debuginfo (He Kuang)

  - Fix 'trace' summary_only option (David Ahern)

  - Fix race in build_id_cache__add_s() in 'buildid-cache' (Milos Vyletel)

  - Don't allow empty argument for field-separator, fixing segfault (Wang Nan)

Infrastructure:

  - Add destructor for format_field in libtraceevent (David Ahern)

  - Prep work for support lzma compressed kernel modules (Jiri Olsa)

  - Update .gitignore with recently added/renamed feature detection files (Yunlong Song)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Bash completion for subcommands (Yunlong Song)

  - Allow annotating entries in callchains in the hists browser (top/report).
    TODO: give some visual cue to what entries in callchains have samples and thus
    can be annotated and/or allow showing the source code for functions without
    samples (Arnaldo Carvalho de Melo)

  - Don't allow empty argument for '-t' in perf report, fixing segfault (Wang Nan)

Infrastructure:

  - Prep work for moving the perf feature tests build system to tools/build (Jiri Olsa)

  - Fix perf-read-vdsox32 not building and lib64 install dir (H.J. Lu)

  - ARM64: fix building error and eh/debug frame offset cache fixes (Wang Nan)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Use kmod_path__parse for machine__new_dso

Using kmod_path__parse to get the module name and update the dso short
name within machine__new_dso function.

This way it's done only first time when dso is created, unlike the
current way when we update it all the time we process memory map of the
kernel module.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8gjmt1ggf5ls1xkk7qi2ko4k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add machine__module_dso function

Separate the dso object addition and update when adding new kernel
module.

Currently we update dso's symtab_type any time we find it in the list,
because we can't distinguish between new and found dso from
__dsos__findnew function.

Adding machine__module_dso that separates finding and adding new dso
objects, so there's no superfluous update of dso.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uvqgs5tyq4wssnq6fm43hgvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add dsos__addnew function

Separate the creation of new dso object and its addition to the dsos
list. It will be used in following patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8j43jod97fdt5dwdsushwwae@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add kmod_path__parse function

Provides united way of parsing kernel module path
into several components.

The new kmod_path__parse function and few defines:

  int __kmod_path__parse(struct kmod_path *m, const char *path,
                         bool alloc_name, bool alloc_ext);

  #define kmod_path__parse(__m, __p)      __kmod_path__parse(__m, __p, false, false)
  #define kmod_path__parse_name(__m, __p) __kmod_path__parse(__m, __p, true , false)
  #define kmod_path__parse_ext(__m, __p)  __kmod_path__parse(__m, __p, false, true)

parse kernel module @path and updates @m argument like:

  @comp - true if @path contains supported compression suffix,
          false otherwise
  @kmod - true if @path contains '.ko' suffix in right position,
          false otherwise
  @name - if (@alloc_name && @kmod) is true, it contains strdup-ed base name
          of the kernel module without suffixes, otherwise strudup-ed
          base name of @path
  @ext  - if (@alloc_ext && @comp) is true, it contains strdup-ed string
          the compression suffix

It returns 0 if there's no strdup error, -ENOMEM otherwise.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9t6eqg8j610r94l743hkntiv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add lzma decompression support for kernel module

In short, Fedora compresses kernel modules now (since version 21) with
lzma compression.

Adding lzma decompress support into the dso.c:compressions array
introduced by Namhyung earlier.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2glp65kdtbrk0gblmirsjsnt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools build: Add feature check for lzma library

Will be used to decompress 'xz' objects. The check detects
the liblzma.so devel library normally delivered by xz package.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>

tools lib traceevent: Add destructor for format_field

Move the calls that frees the resources allocated for a struct format_field to
a separate routine.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1426790181-19118-1-git-send-email-dsahern@gmail.com
[ Split this part from a larger patch, added pevent_ prefix as requested by Steven ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Indicate which callchain entries are annotated

Now that we can annotate entries in a callchain, show which ones have an
associated symbol and samples, by adding a right arrow just before the
symbol name when in verbose mode.

To toggle verbose mode press 'V'.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d2rf1p3h5gdp7hdl2gf2bozl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Handle legacy syscalls tracepoints

Currently the code skips the first field with the expectation that it is 'nr'.
But older kernels do not have the 'nr' field:

    field:int nr;   offset:8;   size:4; signed:1;

Change perf-trace to drop the field if it exists after parsing the format file.

This fixes the off-by-one problem with older kernels (e.g., RHEL6). e.g,
perf-trace shows this for write:

  1.515 ( 0.006 ms): dd/4245 write(buf: 2</dev/pts/0>, count: 140733837536224       ) = 26

where 2 is really the fd, the huge number is really the buf address, etc.  With
this patch you get the more appropriate:

  1.813 ( 0.003 ms): dd/6330 write(fd: 2</dev/pts/0>, buf: 0x7fff22fc81f0, count: 25) = 25

Based-on-a-patch-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gvpdave4u2yq2jnzbcdznpvf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Move feature checks code under tools/build

Moving feature checks code under tools/build directory.

Changing also $feature_dir to point to new feature directory location
and perf Makefiles to include Makefile.feature from new location.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-3lamtb30dhf4wo99y1n8kxg0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Make features checks directory configurable

Putting feature checks directory into $feature_dir, so it's easy to
configure when we move it to bools/build later.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-sq2nsds6uk93372iyxcqcf6q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Separate feature make support into config/Makefile.feature

Move feature related code into separate makefile. The new
Makefile.feature is included from config/Makefile. It will be moved
later into tools/build.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-kj76wphg05x83n6d5ff85ybx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Fix feature_check name clash

We have 2 feature_check functions, which conflict with each other.
Fixing it by renaming the latter to feature_display_check.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-wmyccro6qeffseforipu5kcl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Fix summary_only option

The intent of the -s/--summary-only option is to just show a summary of
the system calls and statistics without any of the individual events.
Commit e596663ebb2 broke that by showing the interrupted lines:

perf trace -i perf.data -s
...
     0.741 ( 0.000 ms): sleep/31316 fstat(fd: 4, statbuf: 0x7ffc75ceb830                                  ) ...
     0.744 ( 0.000 ms): sleep/31316 mmap(len: 100244, prot: READ, flags: PRIVATE, fd: 4                   ) ...
     0.747 ( 0.000 ms): perf/31315 write(fd: 3, buf: 0x7d4bb0, count: 8                                  ) ...
...

Fix by checking for the summary only option.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1426789383-19023-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Fix failure to add multiple probes without debuginfo

Perf tries to find probe function addresses from map when debuginfo
could not be found.

To the first added function, the value of ref_reloc_sym was set in
maps__set_kallsyms_ref_reloc_sym() and can be obtained from
host_machine->kmaps->maps. After that, new maps are added to
host_machine->kmaps->maps in dso__load_kcore(), all these new added maps
do not have a valid ref_reloc_sym.

When adding a second function, get_target_map() may get a map without
valid ref_reloc_sym, and raise the error "Relocated base symbol is not
found".

Fix this by using kernel_get_ref_reloc_sym() to get ref_reloc_sym.

This problem can be reproduced as following:

  $ perf probe --add='sys_write' --add='sys_open'
  Relocated base symbol is not found!
    Error: Failed to add events.

After this patch:

  $ perf probe --add='sys_write' --add='sys_open'
  Added new event:
    probe:sys_write      (on sys_write)

  You can now use it in all perf tools, such as:

      perf record -e probe:sys_write -aR sleep 1

  Added new event:
    probe:sys_open       (on sys_open)

  You can now use it in all perf tools, such as:

      perf record -e probe:sys_open -aR sleep 1

Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426816616-2394-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Add config/feature-checks/*.output to the .gitignore file

They are all auto-generated files during the perf building.

Before this patch:

 $ git status
 Untracked files:
   (use "git add <file>..." to include in what will be committed)

config/feature-checks/test-all.make.output
config/feature-checks/test-backtrace.make.output
config/feature-checks/test-bionic.make.output
config/feature-checks/test-dwarf.make.output
config/feature-checks/test-fortify-source.make.output
config/feature-checks/test-glibc.make.output
config/feature-checks/test-gtk2-infobar.make.output
config/feature-checks/test-gtk2.make.output
config/feature-checks/test-libaudit.make.output
config/feature-checks/test-libbabeltrace.make.output
config/feature-checks/test-libbfd.make.output
config/feature-checks/test-libdw-dwarf-unwind.make.output
config/feature-checks/test-libelf-getphdrnum.make.output
config/feature-checks/test-libelf-mmap.make.output
config/feature-checks/test-libelf.make.output
config/feature-checks/test-libnuma.make.output
config/feature-checks/test-libperl.make.output
config/feature-checks/test-libpython-version.make.output
config/feature-checks/test-libpython.make.output
config/feature-checks/test-libslang.make.output
config/feature-checks/test-libunwind.make.output
config/feature-checks/test-pthread-attr-setaffinity-np.make.output
config/feature-checks/test-stackprotector-all.make.output
config/feature-checks/test-sync-compare-and-swap.make.output
config/feature-checks/test-timerfd.make.output
config/feature-checks/test-zlib.make.output

After this patch:

 $ git status
 nothing to commit, working directory clean

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426821638-11227-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Use FEATURE-DUMP instead of PERF-FEATURES in the .gitignore file

Since commit 4ae61202b31c ("perf build: Rename PERF-FEATURES into
FEATURE-DUMP") renames PERF-FEATURES into FEATURE-DUMP, the .gitignore
file should also do this thing for consistency.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426821638-11227-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Don't allow empty argument for field-separator

Both 'perf diff' and 'perf mem' have 'field-separator' option, which
causes segfault if passed with empty string. This patch uses previously
introduced 'OPT_STRING_NOEMPTY' option macro to prevent fault.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: pi3orama@163.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426820272-23302-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix race in build_id_cache__add_s()

int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
                          const char *name, bool is_kallsyms, bool is_vdso)
{
...
        if (access(filename, F_OK)) {
               ^--------------------------------------------------------- [1]
                if (is_kallsyms) {
                         if (copyfile("/proc/kallsyms", filename))
                                goto out_free;
                } else if (link(realname, filename) && copyfile(name, filename))
                             ^-----------------------------^------------- [2]
                                                            \------------ [3]
                        goto out_free;
        }
...

When multiple instances of perf record get to [1] at more or less same time and
run access() one or more may get failure because the file does not exist yet
(since the first instance did not have chance to link it yet).

At this point the race moves to link() at [2] where first thread to get
there links file and goes on but second one gets -EEXIST so it runs
copyfile [3] which truncates the file.

reproducer:

rm -rf /root/.debug
for cpu in $(awk '/processor/ {print $3}' /proc/cpuinfo); do
perf record -a -v -T -F 1000 -C $cpu \
-o perf-${cpu}.data sleep 5 2> /dev/null &
done
wait

and simply search for empty files by:

find /lib/modules/`uname -r`/kernel/* -size 0

Signed-off-by: Milos Vyletel <milos@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1426847846-11112-1-git-send-email-milos@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Don't allow empty argument for '-t'.

Without this patch, perf report cause segfault if pass "" as '-t':

  $ perf report -t ""

   # To display the perf.data header info, please use --header/--header-only options.
   #
   # Samples: 37  of event 'syscalls:sys_enter_write'
   # Event count (approx.): 37
   #
   # Children    SelfCommand   Shared Object         Symbol
   Segmentation fault

Since -t is used to add field-separator for generate table, -t "" is
actually meanless. This patch defines a new OPT_STRING_NOEMPTY() option
generator to ensure user never pass empty string to that option.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426251114-198991-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf callchain: Separate eh/debug frame offset cache.

Commit f1f13af99a90 ("perf callchain: Cache eh/debug frame offset for
dwarf unwind") introduces a cache for .debug_frame and .eh_frame_hdr.
Unfortunately, it makes them share a same cache (dso->frame_offset).
Which causes unwind failure on ARM:

   $ perf test unwind
  Test dwarf unwind: FAILED!

The reason is that, if a dso has '.debug_frame' but doesn't have
'.eh_frame_hdr' (like ARM), dso->frame_offset will be filled by offset
of '.debug_frame' during the first time calling of find_proc_info() ->
read_unwind_spec_debug_frame(), and be regarded to '.eh_frame_hdr' when
the second time calling of find_proc_info() ->
read_unwind_spec_eh_frame(), since '.eh_frame_hdr' is checked prior to
'.debug_frame'.

This patch solves the problem by creating two cache fields for
'.eh_frame_hdr' and '.debug_frame'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/55028BA0.1030701@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Avoid confusion with preloaded bash function for perf bash completion

Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash
completion script are originally taken from git bash completion script,
these functions may be preloaded before perf bash completion script
runs.

In order to avoid repeating loading the same function twice, some test
constraints are used before these function definitions in the perf bash
completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||').

The problem is that, if these functions in perf bash completion script
are changed for some reason, perf will still use the preloaded bash
functions rather than the customized functions of its own.

As a result, the perf bash completion will behave incorrectly. To get
rid of this problem, a flag can be defined to determine the proper
situation.

And to avoid overwriting the preloaded functions, the names of these
functions in perf bash completion script should be renamed to the
perf-customized ones.

Example:

Before this patch:

 $ type _get_comp_words_by_ref
 _get_comp_words_by_ref is a function
 _get_comp_words_by_ref ()
 {
     local exclude flag i OPTIND=1;
     local cur cword words=();
     local upargs=() upvars=() vcur vcword vprev vwords;
     while getopts "c:i:n:p:w:" flag "$@"; do
         case $flag in
             c)
                 vcur=$OPTARG
             ;;
             i)
                 vcword=$OPTARG
             ;;
             n)
                 exclude=$OPTARG
             ;;
             p)
                 vprev=$OPTARG
             ;;
             w)
                 vwords=$OPTARG
             ;;
         esac;
     done;
     while [[ $# -ge $OPTIND ]]; do
         case ${!OPTIND} in
             cur)
                 vcur=cur
             ;;
             prev)
                 vprev=prev
             ;;
             cword)
                 vcword=cword
             ;;
             words)
                 vwords=words
             ;;
             *)
                 echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2;
                 return 1
             ;;
         esac;
         let "OPTIND += 1";
     done;
     __get_cword_at_cursor_by_ref "$exclude" words cword cur;
     [[ -n $vcur ]] && {
         upvars+=("$vcur");
         upargs+=(-v $vcur "$cur")
     };
     [[ -n $vcword ]] && {
         upvars+=("$vcword");
         upargs+=(-v $vcword "$cword")
     };
     [[ -n $vprev && $cword -ge 1 ]] && {
         upvars+=("$vprev");
         upargs+=(-v $vprev "${words[cword - 1]}")
     };
     [[ -n $vwords ]] && {
         upvars+=("$vwords");
         upargs+=(-a${#words[@]} $vwords "${words[@]}")
     };
     (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}"
 }

As shown above, the _get_comp_words_by_ref is the preloaded function in
fact, rather than the function defined in perf-completion.sh. So if we
happen to change the function for some reason, the result will behave in
a wrong state.

After this patch:

We can set preload_get_comp_words_by_ref="false" to not use the preloaded
function. Instead, it will use the function defined in perf-completion.sh,
which is renamed as __perf_get_comp_words_by_ref to avoid overwriting
the preloaded function _get_comp_words_by_ref.

 $ type __perf_get_comp_words_by_ref
 __perf_get_comp_words_by_ref is a function
 __perf_get_comp_words_by_ref ()
 {
     local exclude cur_ words_ cword_;
     if [ "$1" = "-n" ]; then
         exclude=$2;
         shift 2;
     fi;
     __my_reassemble_comp_words_by_ref "$exclude";
     cur_=${words_[cword_]};
     while [ $# -gt 0 ]; do
         case "$1" in
             cur)
                 cur=$cur_
             ;;
             prev)
                 prev=${words_[$cword_-1]}
             ;;
             words)
                 words=("${words_[@]}")
             ;;
             cword)
                 cword=$cword_
             ;;
         esac;
         shift;
     done
 }

As shown above, the function __perf_get_comp_words_by_ref is loaded and
can work this time.

Note that we do not change the original behavior when those functions are
not preloaded before perf bash completion script runs. In this case,
although the flag is set to "true", the code will still change it to
"false" to use the function defined in perf-completion.sh.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add the bash completion for listing subsubcommands of perf trace

The bash completion does not support listing subsubcommands for 'perf
trace <TAB>', so fix it.

Example:

Before this patch:

 $ perf trace <TAB>
 $

As shown above, the subsubcommands of perf trace does not come out.

After this patch:

 $ perf trace <TAB>
 record

As shown above, the subsubcommands of perf trace can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-13-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add the bash completion for listing subsubcommands of perf timechart

The bash completion does not support listing subsubcommands for 'perf
timechart <TAB>', so fix it.

Example:

Before this patch:

 $ perf timechart <TAB>
 $

As shown above, the subsubcommands of perf timechart does not come out.

After this patch:

 $ perf timechart <TAB>
 record

As shown above, the subsubcommands of perf timechart can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-12-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add the bash completion for listing subsubcommands of perf test

The bash completion does not support listing subsubcommands for 'perf
test <TAB>', so fix it.

Example:

Before this patch:

 $ perf test <TAB>
 $

As shown above, the subsubcommands of perf test does not come out.

After this patch:

 $ perf test <TAB>
 list

As shown above, the subsubcommands of perf test can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-11-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add the bash completion for listing subsubcommands of perf script

The bash completion does not support listing subsubcommands for 'perf
script <TAB>', so fix it.

Example:

Before this patch:

 $ perf script <TAB>
 $

As shown above, the subsubcommands of perf script does not come out.

After this patch:

 $ perf script <TAB>
 record  report

As shown above, the subsubcommands of perf script can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-10-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add the bash completion for listing subsubcommands of perf help

The bash completion does not support listing subsubcommands for 'perf
help <TAB>', so fix it.

Example:

Before this patch:

 $ perf help <TAB>
 $

As shown above, the subsubcommands of perf help does not come out.

After this patch:

 $ perf help <TAB>
 annotate       buildid-cache  data           evlist         inject
 kvm            lock           probe          report         script
 test           top
 bench          buildid-list   diff           help           kmem
 list           mem            record         sched          stat
 timechart      trace

As shown above, the subsubcommands of perf help can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-9-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add the bash completion for listing subsubcommands of perf data

The bash completion does not support listing subsubcommands for 'perf
data <TAB>', so fix it.

Example:

Before this patch:

 $ perf data <TAB>
 $

As shown above, the subsubcommands of perf data does not come out.

After this patch:

 $ perf data <TAB>
 convert

As shown above, the subsubcommands of perf data can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix the bash completion for listing subcommands of perf

The bash completion does not support listing subcommands for 'perf
--<long option> <TAB>'.

Example:

Before this patch:

 $ perf --debug <TAB>
 $

As shown above, the subcommands of perf does not come out.

After this patch:

 $ perf --debug <TAB>
 annotate       buildid-cache  data           evlist         inject
 kvm            lock           probe          report         script
 test           top            version
 bench          buildid-list   diff           help           kmem
 list           mem            record         sched          stat
 timechart      trace

As shown above, the subcommands of perf can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix the bash completion to support listing events for --event

The bash completion only supports -e rather than --event, so fix it.

Example:

Before this patch:

 $ perf record --event <TAB>
 $

As shown above, the events of record does not come out.

After this patch:

 $ perf record --event <TAB>
 lignment-faults                   cpu/instructions/
 L1-dcache-prefetch-misses          node-prefetches
 uncore_rbox_0/qpi0_idle_filt/
 branch-instructions                cpu/mem-loads/
 L1-dcache-store-misses             node-prefetch-misses
 uncore_rbox_0/qpi1_date_response/
 branch-load-misses                 cpu-migrations
 L1-dcache-stores                   node-store-misses
 uncore_rbox_0/qpi1_filt_send/
 branch-loads                       dTLB-load-misses
 L1-icache-load-misses              node-stores
 uncore_rbox_0/qpi1_idle_filt/
 ...

As shown above, the events of record can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix the bash completion for listing events of perf subcommand record|stat|top -e

The bash completion does not support listing events for 'perf kvm|kmem|
mem|lock|sched record|stat|top -e <TAB>', where 'kvm|kmem|mem|lock|sched'
are all subcommands of perf.

Example:

Before this patch:

 $ perf kvm record -e <TAB>
 $

As shown above, the events of record does not come out.

After this patch:

 $ perf kvm record -e <TAB>
 alignment-faults                   cpu/instructions/
 L1-dcache-prefetch-misses          node-prefetches
 uncore_rbox_0/qpi0_idle_filt/
 branch-instructions                cpu/mem-loads/
 L1-dcache-store-misses             node-prefetch-misses
 uncore_rbox_0/qpi1_date_response/
 branch-load-misses                 cpu-migrations
 L1-dcache-stores                   node-store-misses
 uncore_rbox_0/qpi1_filt_send/
 branch-loads                       dTLB-load-misses
 L1-icache-load-misses              node-stores
 uncore_rbox_0/qpi1_idle_filt/
 ...

As shown above, the events of record can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Provide the right bash completion for listing options of perf subcommand subsubcommand

The bash completion gives wrong options for 'perf kvm|kmem|mem|lock|
sched subsubcommand --<TAB>', where 'kvm|kmem|mem|lock|sched' are all
subcommands of perf and 'subsubcommand' is a subcommand of 'kvm|kmem|mem
|lock|sched'. In fact, the result incorrectly lists the bash completion
of 'perf subcommand' rather than 'perf subcommand subsubcommand'.

Example:

Before this patch:

 $ perf kvm record --<TAB>
 --guest          --guestkallsyms  --guestmodules   --guestmount
 --guestvmlinux   --host           --input          --output
 --verbose

As shown above, the result is the options of kvm rather than record.

After this patch:

 $ perf kvm record --<TAB>
 --all-cpus          --cgroup            --delay             --group
 --no-buildid        --output            --quiet             --stat
 --uid
 --branch-any        --count             --event             --intr-regs
 --no-buildid-cache  --period            --raw-samples       --tid
 --verbose
 --branch-filter     --cpu               --filter            --mmap-pages
 --no-inherit        --per-thread        --realtime          --timestamp
 --weight
 --call-graph        --data              --freq
 --no-buffering      --no-samples        --pid
 --running-time      --transaction

As shown above, the result is exactly the options of record as we wished.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix the bash completion for listing subsubcommands of perf subcommand

The bash completion does not support listing subsubcommands for 'perf
kvm|kmem|mem|lock|sched --<long option> <TAB>', where 'kvm|kmem|mem|
lock|sched' are all subcommands of perf.

Example:

Before this patch:

 $ perf kvm --verbose <TAB>
 $

As shown above, the subsubcommands of perf kvm does not come out.

After this patch:

 $ perf kvm --verbose <TAB>
 buildid-list  diff          record        report        stat
 top

As shown above, the subsubcommands of perf kvm can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix the bash completion for listing options of perf subcommand

The bash completion does not support listing options for 'perf
kvm|kmem|mem|lock|sched --<TAB>', where 'kvm|kmem|mem|lock|sched' are
all subcommands of perf.

Example:

Before this patch:

 $ perf kvm --<TAB>
 $

As shown above, the options of perf kvm does not come out.

After this patch:

 $ perf kvm --<TAB>
 --alloc    --caller   --input    --line     --raw-ip   --sort
 --verbose

As shown above, the options of perf kvm can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix perf-read-vdsox32 not building and lib64 install dir

Commit:

  c6e5e9fbc3ea ("perf tools: Fix building error in x86_64 when dwarf unwind is on")

removed the definition of IS_X86_64 but not all places using it, with
the consequence that perf-read-vdsox32 would not be built anymore, and
the default lib install directory was 'lib' instead of 'lib64'.

Also needs to go to v3.19.

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org # 3.19
Link: http://lkml.kernel.org/r/CAMe9rOqpGVq3D88w+D15ef7sv6G6k57ZeTvxBm46=WFgzo9p1w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Rename feature_print_var_code to print_var_code

As it has nothing to do with features and won't be moved
into tools/build.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-6qgf37nss4wwjatgj5i4ng0o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Rename PERF-FEATURES into FEATURE-DUMP

Preparing for feature checks separation, moving related stuff under
'FEATURE*' namespace.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-v9oo22ra70rrk1dy495a7bjc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Rename display_vf to feature_verbose

Preparing for feature checks separation, moving related
stuff under 'feature*' namespace.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ciaflab01mf0ljmfb9xr4p41@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Rename display_lib into feature_display

Preparing for feature checks separation, moving related stuff under
'feature*' namespace.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-t72o4nwx81owjv14y43b2wpf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Get rid of VF_FEATURE_TESTS

It only contains (FEATURE_TESTS - FEATURE_DISPLAY) tests to display the
rest of the checks on 'make VF=1'. But we can actually compute this
list, which is less confusing.

Also renaming LIB_FEATURE_TESTS into FEATURE_DISPLAY, so it reflects
what this variable actually does - display its tests status to user.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-gs160y03hpmx5ezpcr4gunxc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Rename CORE_FEATURE_TESTS to FEATURE_TESTS

Preparing for feature checks separation, moving related stuff under
'FEATURE*' namespace.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-iobj4f9gygcakrk2v5u61159@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Get rid of LIB_INCLUDE variable

It has no use, so we can directly use the value for CFLAGS.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ywyr5v962s32daq5hpgfkjap@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Fix pthread-attr-setaffinity-np include in test-all

The test-all fails to build due to type in pthread-attr-setaffinity-np
include.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-awn2658267slejnebyrlns86@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Move features build output under features directory

Following commit introduced features build dump:
  443a70541c56 perf tools: Output feature detection's gcc output to a file

Moving them into to have code more compact and renaming build dump
files. For each feature 'test-X' new file 'test-X.make.output' is
created and contains the build out.  It's created in the same directory
as the feature itself.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-dk6svnhcephrzgz4mfpcmtm7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Disable default check for libbabeltrace

Remove libbabeltrace check from default features set, because the
requested version is not released yet in most distributions. We'll
enable later.

Calling libbabeltrace check manually via feature_check before
$(feature-libbabeltrace) is used.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-5n7mr6ugcwdbxk0n1z8uukaa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix building error for arm64.

Commit b11db6581beaccef8ae9a388ae96074aa5cc144f ("perf tools: Fix build
error on ARCH=i386/x86_64/sparc64") uses sed on ARCH, which triggers a
bug in sequence of sed expression, where 's/arm.*/arm/' will replace
'arm64' to 'arm', causes arm64 building failure.

This patch prevent 'arm64' to be mached for 'arm.*' case.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426598987-75245-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Allow annotating entries in callchains

Instead of annotating just the top level hist_entry, allow instead
annotating a map_symbol, i.e. the top level hist_entry or one of the
callchains for which there were samples.

Suggested-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-k1zxj5564je9jei4yd15ouwn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Remove hist_entry->used, not used anymore

Since hist_entry__delete() nowadays doesn't actually frees anything that
may be in use by the annotation code.

Eventually we will solve this for good by reference counting struct
symbol.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uldtgljymtrkns0knpiso5op@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

kprobes/x86: Return correct length in __copy_instruction()

On x86-64, __copy_instruction() always returns 0 (error) if the
instruction uses %rip-relative addressing. This is because
kernel_insn_init() is called the second time for 'insn' instance
in such cases and sets all its fields to 0.

Because of this, trying to place a kprobe on such instruction
will fail, register_kprobe() will return -EINVAL.

This patch fixes the problem.

Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20150317100918.28349.94654.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf hists browser: Fix up some branch alignment

Those asprintf return checks should be aligned with the other
conditionals, fix it.

Also add {} blocks to further clarify.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-`ranpwd
Link: http://lkml.kernel.org/n/tip-nqgs07jfphbkw67wja870d3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Simplify symbol annotation menu setup

No need to repeat some tests, skip annotation instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6h6igrb81u4e6rwfmx7dv47n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Fix UI bug after zoom into thread/dso/symbol and another, after fold/unfold,
    in the TUI hists browser (He Kuang)

  - Fixes for 'perf probe' to better handle aliased symbols, for instance in glibc (Masami Hiramatsu, Namhyung Kim)

  - 'perf kmem' improvements and fixes: (Namhyung Kim)
    - Fix segfault when invalid sort key is given
    - Allow -v option
    - Fix alignment of slab result table

  - 'perf stat' improvements and fixes: (Andi Kleen)
    - Output running time and run/enabled ratio in CSV mode
    - Fix IPC and other formulas with -A
    - Always correctly indent ratio column

  - Add tracepoint events fields CTF conversion support to 'perf data' (Sebastian Andrzej Siewior)

Infrastructure changes:

  - Output feature detection's gcc output to a file, to help in debugging (Arnaldo Carvalho de Melo)

  - Fix 'perf probe' compiles due to declarations using perf_probe_point (David Ahern)

  - Fix possible double free on error in 'perf probe' (He Kuang)

  - Remove superfluous thread->comm_set setting (Jiri Olsa)

  - Fix libbabeltrace detection (Jiri Olsa)

  - More work on separating ordered_events code out of perf_session (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf data: Add tracepoint events fields CTF conversion support

Adding support to convert tracepoint event fields into CTF
event fields.

We parse each tracepoint event for CTF conversion and add
tracepoint fields as regular CTF event fields, so they
appear in babeltrace output like:

  $ babeltrace ./ctf-data/
  ...
  [09:02:00.950703057] (+?.?????????) sched:sched_stat_runtime: { }, { perf_ip = ... SNIP ... common_type = 298, common_flags = 1, \
  common_preempt_count = 0, common_pid = 31813, comm = "perf", pid = 31813, runtime = 458800, vruntime = 52059858071 }
  ...

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-6-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf kmem: Fix alignment of slab result table

Its table was a bit misaligned.  Fix it.

Before:

  # perf kmem stat --caller -l 10
  ------------------------------------------------------------------------------------------------------
   Callsite                           | Total_alloc/Per | Total_req/Per   | Hit      | Ping-pong | Frag
  ------------------------------------------------------------------------------------------------------
   radeon_cs_parser_init.part.1+11a   |      2080/260   |      1504/188   |        8 |        0 | 27.692%
   radeon_cs_parser_init.part.1+e1    |       384/96    |       288/72    |        4 |        0 | 25.000%
   radeon_cs_parser_init.part.1+93    |       128/32    |        96/24    |        4 |        0 | 25.000%
   load_elf_binary+a39                |       512/512   |       392/392   |        1 |        0 | 23.438%
   __alloc_skb+89                     |      6144/877   |      4800/685   |        7 |        6 | 21.875%
   radeon_fence_emit+5c               |      1152/192   |       912/152   |        6 |        0 | 20.833%
   radeon_cs_parser_relocs+ad         |      8192/2048  |      6624/1656  |        4 |        0 | 19.141%
   radeon_sa_bo_new+78                |      1280/64    |      1120/56    |       20 |        0 | 12.500%
   load_elf_binary+2c4                |        32/32    |        28/28    |        1 |        0 | 12.500%
   anon_vma_prepare+101               |       576/72    |       512/64    |        8 |        0 | 11.111%
   ...                                | ...             | ...             | ...    | ...      | ...
  ------------------------------------------------------------------------------------------------------

After:

  ---------------------------------------------------------------------------------------------------------
   Callsite                           | Total_alloc/Per | Total_req/Per   | Hit      | Ping-pong | Frag
  ---------------------------------------------------------------------------------------------------------
   radeon_cs_parser_init.part.1+11a   |      2080/260   |      1504/188   |        8 |         0 | 27.692%
   radeon_cs_parser_init.part.1+e1    |       384/96    |       288/72    |        4 |         0 | 25.000%
   radeon_cs_parser_init.part.1+93    |       128/32    |        96/24    |        4 |         0 | 25.000%
   load_elf_binary+a39                |       512/512   |       392/392   |        1 |         0 | 23.438%
   __alloc_skb+89                     |      6144/877   |      4800/685   |        7 |         6 | 21.875%
   radeon_fence_emit+5c               |      1152/192   |       912/152   |        6 |         0 | 20.833%
   radeon_cs_parser_relocs+ad         |      8192/2048  |      6624/1656  |        4 |         0 | 19.141%
   radeon_sa_bo_new+78                |      1280/64    |      1120/56    |       20 |         0 | 12.500%
   load_elf_binary+2c4                |        32/32    |        28/28    |        1 |         0 | 12.500%
   anon_vma_prepare+101               |       576/72    |       512/64    |        8 |         0 | 11.111%
   ...                                | ...             | ...             | ...      | ...       | ...
  ---------------------------------------------------------------------------------------------------------

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426145571-3065-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf kmem: Allow -v option

Current perf kmem fails when -v option is used.  As it's very useful for
debugging, let's allow it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426145571-3065-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf kmem: Fix segfault when invalid sort key is given

When it tries to free 'str', it was already updated by strsep() - so it
needs to save the original pointer.

  # perf kmem stat -s xxx,hit
    Error: Unknown --sort key: 'xxx'
  *** Error in `perf': free(): invalid pointer: 0x0000000000e9e7b6 ***
  ======= Backtrace: =========
  /usr/lib/libc.so.6(+0x7198e)[0x7fc7e6e0d98e]
  /usr/lib/libc.so.6(+0x76dee)[0x7fc7e6e12dee]
  /usr/lib/libc.so.6(+0x775cb)[0x7fc7e6e135cb]
  ./perf[0x44a1b5]
  ./perf[0x490b20]
  ./perf(parse_options_step+0x173)[0x491773]
  ./perf(parse_options_subcommand+0xa7)[0x491fb7]
  ./perf(cmd_kmem+0x2bc)[0x44ae4c]
  ./perf[0x47aa13]
  ./perf(main+0x60a)[0x427a9a]
  /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7fc7e6dbc800]
  ./perf(_start+0x29)[0x427bb9]

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426145571-3065-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Always correctly indent ratio column

When cycles or instructions do not print anything, as in being,
--per-socket or --per-core modi, the ratio column was not correctly
indented for them. This lead to some ratios not lining up with the
others. Always indent correctly when nothing is printed.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1426087682-22765-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Fix IPC and other formulas with -A

perf stat didn't compute the IPC and other formulas for individual CPUs
with -A. Fix this for the easy -A case. As before, --per-core and
--per-socket do not handle it, they simply print nothing.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1426087682-22765-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Output running time and run/enabled ratio in CSV mode

The information how much a counter ran in 'perf stat' can be quite
interesting for other tools to judge how trustworthy a measurement is.

Currently it is only output in non CSV mode.

This patches make perf stat always output the running time and the
enabled/running ratio in CSV mode.

This adds two new fields at the end for each line. I assume that
existing tools ignore new fields at the end, so it's on by default.

Only CSV mode is affected, no difference otherwise.

v2: Add extra print_running function
v3: Avoid printing nan
v4: Remove some elses and add brackets.
v5: Move non CSV case into print_running

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1426083387-17006-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Fix UI bug after fold/unfold

In perf hists browser, the fold/unfold stat of each hist entry is
recorded but hb->nr_callchain_rows loses its value after zoom out and
zoom in back. This causes a wrong row cursor range that restrict user to
move down anymore.

This bug can be reproduced as follows:

  $ perf record -g -e syscalls:* ls
  $ perf report

    Available samples
  ================================================================
    2 syscalls:sys_enter_mprotect <= [enter one of the entries]
    2 syscalls:sys_exit_mprotect
    13 syscalls:sys_enter_brk
    ...

In the hists brower, unfold some of the items, now the cursor can reach
to any rows:

    Children      Self  Command  Shared Object          Symbol
  ================================================================
  -  100.00%   100.00%  ls       libuClibc-0.9.33.2.so  [.] lstat64
  - lstat64
       16.67% 0x6469702e64
       8.33% 0x646970
       8.33% 0x617461
       8.33% 0x65
  -   16.67%     0.00%  ls       [unknown]              [.]0x6469702e64
     0x6469702e64 <= [cursor can reach to bottom line, everything is ok]

Now, zoom back to "Available samples" and enter again:

    Children      Self  Command  Shared Object          Symbol
  ================================================================
  -  100.00%   100.00%  ls       libuClibc-0.9.33.2.so  [.] lstat64
  - lstat64
       16.67% 0x6469702e64
       8.33% 0x646970
       8.33% 0x617461 <= [cursor may stop here, can't move down anymore]
       8.33% 0x65
  -   16.67%     0.00%  ls       [unknown]              [.]0x6469702e64
     0x6469702e64

This patch recalculates hb->nr_callchain_rows to fix the bug.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426144909-18951-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Fix compiles due to declarations using perf_probe_point

perf fails to build with gcc "(GCC) 4.4.7 20120313 (Red Hat
4.4.7-4.0.9)" (a.k.a., RHEL6 / CentOS 6 / OL 6):

  cc1: warnings being treated as errors
  util/probe-event.c: In function ‘get_alternative_line_range’:
  util/probe-event.c:359: error: missing initializer
  util/probe-event.c:359: error: (near initialization for ‘pp.file’)
  util/probe-event.c:359: error: missing initializer
  util/probe-event.c:359: error: (near initialization for ‘result.function’)

Fix by bringing in initializers to declaration.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1426084580-60780-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Fix UI bug after zoom into thread/dso/symbol

When zoom into thread/dso/symbol, the fold/unfold stat is cleared in
hists__filter_by_thread/dso/symbol(), but h->nr_rows is not cleared. So
if we toggle fold stat on the unfold entires, nr_entries got a wrong
value.

This bug can be reproduced as follows:

$ perf record -g -e syscalls:sys_enter_open ls
$ perf report

    Children      Self  Command  Shared Object            Symbol
  ================================================================
  +   50.00%     0.00%  ls       ld64.so  [.]  _dl_get_ready_to_run
  -   50.00%     0.00%  ls       ld64.so  [.]  _dl_load_shared_library
      _dl_load_shared_library <= [Zoom into thread/dso]
      _dl_get_ready_to_run
      _start
  ...

In the new thread hists, all entries reset to fold, if we unfold the
same entry as we previously unfolded, nr_entries got wrong value, and we
can't move down cursor to bottom row.

                                                         Thread: ls
    Children      Self  Command  Shared Object            Symbol
  ================================================================
  +   50.00%     0.00%  ls       ld64.so  [.]  _dl_get_ready_to_run
  -   50.00%     0.00%  ls       ld64.so  [.]  _dl_load_shared_library
      _dl_load_shared_library
      _dl_get_ready_to_run <= [cursor may stop here, can't move down]
      _start
  ...

This patch clear h->nr_rows to fix this bug.

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426077363-855-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>