Felix Fietkau [Mon, 16 Mar 2015 18:10:17 +0000 (18:10 +0000)]
geode: set target to Geode GX1 to support older chips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44847
Jonas Gorski [Mon, 16 Mar 2015 13:37:38 +0000 (13:37 +0000)]
brcm63xx: use consistent gpio chip labeling for OF/non-OF
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44846
Felix Fietkau [Mon, 16 Mar 2015 13:05:49 +0000 (13:05 +0000)]
ltq-adsl-mei: fix bugs in linux 3.18 compatiblity change
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44845
Felix Fietkau [Mon, 16 Mar 2015 13:05:42 +0000 (13:05 +0000)]
ltq-adsl: fix bugs in linux 3.18 compatiblity change
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44844
Nicolas Thill [Mon, 16 Mar 2015 12:32:22 +0000 (12:32 +0000)]
packages: more (e)glibc fixes after r44701
_GNU_SOURCE has been declared "deprecated" in favor of _DEFAULT_SOURCE in glibc
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44843
Nicolas Thill [Mon, 16 Mar 2015 12:25:06 +0000 (12:25 +0000)]
packages: some (e)glibc fixes after r44701
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44842
Jonas Gorski [Mon, 16 Mar 2015 11:53:22 +0000 (11:53 +0000)]
brcm63xx: switch to 3.18
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44841
Jonas Gorski [Mon, 16 Mar 2015 11:53:14 +0000 (11:53 +0000)]
brcm63xx: call brcm63xx_detect explicitly
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44840
Jonas Gorski [Mon, 16 Mar 2015 11:53:06 +0000 (11:53 +0000)]
brcm63xx: move preinit ifname detection to the preinit script
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44839
Jonas Gorski [Mon, 16 Mar 2015 11:52:57 +0000 (11:52 +0000)]
brcm63xx: remove obsolete brcm63xx_has_reset_button
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44838
Jonas Gorski [Mon, 16 Mar 2015 11:52:49 +0000 (11:52 +0000)]
brcm63xx: set status leds from within diag.sh
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44837
Jonas Gorski [Mon, 16 Mar 2015 11:52:42 +0000 (11:52 +0000)]
brcm63xx: switch to board_name based configuration
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44836
Jonas Gorski [Mon, 16 Mar 2015 11:52:35 +0000 (11:52 +0000)]
brcm63xx: add missing board_ids to legacy_detect
These boards do not have a corresponding dts file yet.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44835
Jonas Gorski [Mon, 16 Mar 2015 11:52:26 +0000 (11:52 +0000)]
brcm63xx: add device tree based board detection
Use the device tree model property for detecting the board instead
of board id from nvram if present.
Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44834
Jonas Gorski [Mon, 16 Mar 2015 11:52:20 +0000 (11:52 +0000)]
brcm63xx: populate /tmp/sysinfo
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44833
Jonas Gorski [Mon, 16 Mar 2015 11:52:16 +0000 (11:52 +0000)]
brcm63xx: base-files: rename board_name to board_id
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44832
Jonas Gorski [Mon, 16 Mar 2015 11:52:10 +0000 (11:52 +0000)]
brcm63xx: Add DGND3700 v1 / DGND3800B support
This adds support for the Netgear DGND3700 v1 and DGND3800B.
DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.
The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44831
Jonas Gorski [Mon, 16 Mar 2015 11:51:54 +0000 (11:51 +0000)]
buildroot: make it easier to build all kmods
Split out kmods from ALL to make it easier to create local builds that
are compatible kmod-wise with releases.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44830
John Crispin [Mon, 16 Mar 2015 10:58:43 +0000 (10:58 +0000)]
netlogic: bump to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44829
Felix Fietkau [Mon, 16 Mar 2015 08:29:42 +0000 (08:29 +0000)]
mvebu: drop linux 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44828
John Crispin [Mon, 16 Mar 2015 08:05:42 +0000 (08:05 +0000)]
kernel: add missing MTD_SPLIT_FIT_FW symbol
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44827
Felix Fietkau [Mon, 16 Mar 2015 07:54:55 +0000 (07:54 +0000)]
json-c: merge an upstream fix for a compiler warning (fixes #19187)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44826
Felix Fietkau [Mon, 16 Mar 2015 07:51:45 +0000 (07:51 +0000)]
cmake: include external toolchain directory in CMAKE_FIND_ROOT_PATH (fixes #19074)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44825
John Crispin [Mon, 16 Mar 2015 07:41:24 +0000 (07:41 +0000)]
sunxi: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44824
John Crispin [Mon, 16 Mar 2015 07:41:19 +0000 (07:41 +0000)]
adm5120: drop 3.8 and 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44823
John Crispin [Mon, 16 Mar 2015 07:41:10 +0000 (07:41 +0000)]
ar7: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44822
John Crispin [Mon, 16 Mar 2015 07:41:05 +0000 (07:41 +0000)]
ixp4xx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44821
John Crispin [Mon, 16 Mar 2015 07:40:59 +0000 (07:40 +0000)]
octeon: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44820
John Crispin [Mon, 16 Mar 2015 07:40:54 +0000 (07:40 +0000)]
oxnas: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44819
John Crispin [Mon, 16 Mar 2015 07:40:47 +0000 (07:40 +0000)]
mpc85xx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44818
John Crispin [Mon, 16 Mar 2015 07:40:41 +0000 (07:40 +0000)]
cns3xxx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44817
John Crispin [Mon, 16 Mar 2015 07:40:19 +0000 (07:40 +0000)]
au1000: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44816
John Crispin [Mon, 16 Mar 2015 07:40:09 +0000 (07:40 +0000)]
ar71xx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44815
John Crispin [Mon, 16 Mar 2015 07:40:02 +0000 (07:40 +0000)]
realview: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44814
John Crispin [Mon, 16 Mar 2015 07:39:57 +0000 (07:39 +0000)]
malta: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44813
John Crispin [Mon, 16 Mar 2015 07:39:52 +0000 (07:39 +0000)]
lantiq: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44812
John Crispin [Mon, 16 Mar 2015 07:39:46 +0000 (07:39 +0000)]
ralink: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44811
Felix Fietkau [Mon, 16 Mar 2015 07:12:31 +0000 (07:12 +0000)]
x86: refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44810
Felix Fietkau [Mon, 16 Mar 2015 07:05:30 +0000 (07:05 +0000)]
x86: merge all geode based subtargets into one
Build all geode platform drivers into the kernel
Remove kmod-* packages for these drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44809
Rafał Miłecki [Mon, 16 Mar 2015 07:04:28 +0000 (07:04 +0000)]
mac80211: include brcmfmac USB firmware only if support was enabled
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44808
Rafał Miłecki [Mon, 16 Mar 2015 06:52:26 +0000 (06:52 +0000)]
mac80211: add option for USB support in brcmfmac
This makes it consistent with other buses configuration.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44807
Rafał Miłecki [Mon, 16 Mar 2015 06:39:10 +0000 (06:39 +0000)]
mac80211: update wiki URLs
linuxwireless.org was moved to wireless.wiki.kernel.org and it RO now
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44806
Felix Fietkau [Mon, 16 Mar 2015 05:57:04 +0000 (05:57 +0000)]
x86: remove 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44805
Felix Fietkau [Mon, 16 Mar 2015 05:52:02 +0000 (05:52 +0000)]
kernel: remove linux 3.13 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44804
Felix Fietkau [Mon, 16 Mar 2015 05:51:56 +0000 (05:51 +0000)]
omap: remove old kernel versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44803
Felix Fietkau [Mon, 16 Mar 2015 05:51:52 +0000 (05:51 +0000)]
omap: update to linux 3.18, it has been tested by at least one builder and 3.13 has not been built by buildbot in a long time
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44802
Felix Fietkau [Mon, 16 Mar 2015 05:16:14 +0000 (05:16 +0000)]
kernel: port missing ubi EOF marker support patch to 3.19 and 4.0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44801
Felix Fietkau [Mon, 16 Mar 2015 05:16:07 +0000 (05:16 +0000)]
kernel: fix duplicate use of patch number 490
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44800
Felix Fietkau [Mon, 16 Mar 2015 04:47:28 +0000 (04:47 +0000)]
kernel: add a few missing config symbols for 3.18+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44799
Felix Fietkau [Mon, 16 Mar 2015 04:19:09 +0000 (04:19 +0000)]
kernel: add missing description for GRO optimization patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44798
Felix Fietkau [Sun, 15 Mar 2015 20:32:09 +0000 (20:32 +0000)]
kernel: skip GRO for packets bridged to other hosts
Eliminates excessive skb copying when bridging from LAN to WLAN on
ramips.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44797
John Crispin [Sun, 15 Mar 2015 19:47:46 +0000 (19:47 +0000)]
rules.mk: add newline definition
To be used for stuff like $(subst $(space),$(newline),$(SOME_VAR))
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 44796
John Crispin [Sun, 15 Mar 2015 19:39:47 +0000 (19:39 +0000)]
ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions
While the switch positions aren't explicitly labeled as on and off, we've heard
complaints about them being wrong. This patch changes the handling to match the
stock firmware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44795
John Crispin [Sun, 15 Mar 2015 19:39:41 +0000 (19:39 +0000)]
ipq806x: fix AP148 boot from NOR
This patch allows AP148 to boot from NOR flash.
As we're using a FIT image as kernel (which includes kernel bin + DTB)
we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT
image and automatically split the "firmware" partition into 2 MTD parts
(kernel + rootfs).
The rootfs will then be parsed and split between rootfs + rootfs_data,
as usual.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44794
John Crispin [Sun, 15 Mar 2015 19:39:33 +0000 (19:39 +0000)]
ipq806x: add ap148 bootargs to DT
Only one bootargs is really needed: the tty port. All the other
information will use the OpenWrt mechanisms.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44793
John Crispin [Sun, 15 Mar 2015 19:39:27 +0000 (19:39 +0000)]
kernel: mtdsplit: add support for FIT image
If this option is enabled, the FIT image format will be detected and
split by the mtdsplit code. Detection is based upon the FDT magic, which
will trigger the parsing and detection of the rootfs, ending-up in the
creation of the 2 new partitions.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44792
John Crispin [Sun, 15 Mar 2015 19:25:48 +0000 (19:25 +0000)]
Fix (invert/revert) Hornet-UB WPS LED state
My previous patch regarding the Hornet-UB board
(commit:
beed4d82d6a0154b0cd5f7b84e2180215ace6718) actually
causes the WPS led state to be inverted. Practically this meant
that value 0 in /sys/class/led/alfa:blue:wps/brightness would
turn the LED on and any positive value (1-255) would turn it off.
The above of course is confusing and hence reverting this value
back to the way it was before
beed4d82d6a0154b0cd5f7b84e2180215ace6718.
Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>
SVN-Revision: 44791
Felix Fietkau [Sun, 15 Mar 2015 17:51:16 +0000 (17:51 +0000)]
mac80211: add missing dependency for brcmfmac with SDIO support enabled (fixes #19184)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44790
Jo-Philipp Wich [Sun, 15 Mar 2015 14:48:18 +0000 (14:48 +0000)]
netifd: dhcp: install host route to gateway (#19182)
Certain DHCP servers push a gateway outside of the assigned interface subnet,
to support those situations install a host route towards the gateway.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44789
Jonas Gorski [Sun, 15 Mar 2015 14:19:28 +0000 (14:19 +0000)]
b53: global config is part of the management page, not the control page
It will now actually enable the mib counters instead of enabling rx/tx for
the first switch port.
Reported-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44788
Jonas Gorski [Sun, 15 Mar 2015 14:19:22 +0000 (14:19 +0000)]
brcm63xx: brcm63xxpart: fix buffer overrun in of parser
We never account for the added partitions from the tag parser, so
allocated two partioness less than needed. This can cause issues when
the memory gets reused before the mtd code can actually add the
partitions.
Fixes oopses like:
[ 0.920000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.924000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
[ 0.940000] 0x000000010000-0x0000003f0000 : "linux"
[ 0.948000] CPU 0 Unable to handle kernel paging request at virtual address
00010203, epc ==
8028ddf8, ra ==
801ad5d4
[ 0.956000] Oops[#1]:
[ 0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22
[ 0.956000] task:
8181da78 ti:
8181e000 task.ti:
8181e000
[ 0.956000] $ 0 :
00000000 10008f00 00010203 81049e40
[ 0.956000] $ 4 :
00010203 000000d0 00000000 000000fd
[ 0.956000] $ 8 :
00000000 80015490 00000000 80370000
[ 0.956000] $12 :
00000000 00000001 00000000 2f736269
[ 0.956000] $16 :
00010203 000000d0 8007bde0 81482000
[ 0.956000] $20 :
00000000 00000004 81481f80 803c4b78
[ 0.956000] $24 :
00000000 00000000
[ 0.956000] $28 :
8181e000 8181fbe8 80b20000 801ad5d4
[ 0.956000] Hi :
00000000
[ 0.956000] Lo :
00000000
[ 0.956000] epc :
8028ddf8 strlen+0x4/0x20
[ 0.956000] Not tainted
[ 0.956000] ra :
801ad5d4 kstrdup+0x30/0x84
[ 0.956000] Status:
10008f03 KERNEL EXL IE
[ 0.956000] Cause :
00800008
[ 0.956000] BadVA :
00010203
[ 0.956000] PrId :
0002a010 (Broadcom BMIPS4350)
[ 0.956000] Modules linked in:
[ 0.956000] Process swapper/0 (pid: 1, threadinfo=
8181e000, task=
8181da78, tls=
00000000)
[ 0.956000] Stack :
8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000
81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c
8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff
8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005
81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000
...
[ 0.956000] Call Trace:
[ 0.956000] [<
8028ddf8>] strlen+0x4/0x20
[ 0.956000] [<
801ad5d4>] kstrdup+0x30/0x84
[ 0.956000] [<
8007bde0>] allocate_partition+0x58/0x93c
[ 0.956000] [<
80074ce0>] add_mtd_partitions+0x90/0x144
[ 0.956000] [<
801cc228>] mtd_device_parse_register+0x78/0xcc
[ 0.956000] [<
801e7870>] of_flash_probe+0x658/0x728
[ 0.956000] [<
80216ee0>] platform_drv_probe+0x24/0x60
[ 0.956000] [<
801221f4>] driver_probe_device+0xcc/0x214
[ 0.956000] [<
800466f8>] __driver_attach+0x7c/0xb4
[ 0.956000] [<
800c38bc>] bus_for_each_dev+0x94/0xa4
[ 0.956000] [<
800c35e4>] bus_add_driver+0x104/0x1ec
[ 0.956000] [<
80122400>] driver_register+0xac/0x100
[ 0.956000] [<
80113a5c>] do_one_initcall+0x148/0x204
[ 0.956000] [<
803cbd1c>] kernel_init_freeable+0x168/0x220
[ 0.956000] [<
800157bc>] kernel_init+0x10/0x114
[ 0.956000] [<
800108a8>] ret_from_kernel_thread+0x14/0x1c
[ 0.956000]
[ 0.956000]
Code:
03e00008 27bd0028 00801021 <
80430000>
10600003 00000000 080a377e 24420001 03e00008
[ 1.192000] ---[ end trace
9d89ccbcae27fe40 ]---
[ 1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.200000]
[ 1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44787
Jonas Gorski [Sun, 15 Mar 2015 14:19:14 +0000 (14:19 +0000)]
modules: add depenency on usb-gadget for dwc2 also on brcm63xx
Bcm63xx supports usb gadget, so dwc2 will default do dual mode.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44786
Jonas Gorski [Sun, 15 Mar 2015 14:19:10 +0000 (14:19 +0000)]
brcm63xx: kmod-bcm63xx-udc: fix module path for 3.18+
Fix the module path for linux 3.18+.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44785
Jonas Gorski [Sun, 15 Mar 2015 14:19:07 +0000 (14:19 +0000)]
brcm63xx: fix 6368 cpu1 reg typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44784
Felix Fietkau [Sun, 15 Mar 2015 12:03:01 +0000 (12:03 +0000)]
toolchain: remove leftovers from old llvm-gcc experiments
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44783
Felix Fietkau [Sun, 15 Mar 2015 11:08:10 +0000 (11:08 +0000)]
scripts/feeds: add support for uninstalling targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44782
Felix Fietkau [Sun, 15 Mar 2015 11:08:05 +0000 (11:08 +0000)]
scripts/feeds: add support for installing targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44781
Felix Fietkau [Sun, 15 Mar 2015 11:08:01 +0000 (11:08 +0000)]
scripts/metadata.pm: save target makefile names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44780
Felix Fietkau [Sun, 15 Mar 2015 11:07:57 +0000 (11:07 +0000)]
scripts/feeds: get rid of redundant feed cache copy
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44779
Felix Fietkau [Sun, 15 Mar 2015 11:07:52 +0000 (11:07 +0000)]
scripts/feeds: remove useless install_method abstraction
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44778
Felix Fietkau [Sun, 15 Mar 2015 11:07:44 +0000 (11:07 +0000)]
scripts/feeds: add support for searching for targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44777
Felix Fietkau [Sun, 15 Mar 2015 11:07:40 +0000 (11:07 +0000)]
scripts/metadata.pl: move parse_target_metadata() to metadata.pm
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44776
Felix Fietkau [Sun, 15 Mar 2015 11:07:34 +0000 (11:07 +0000)]
scripts/feeds: scan for target metadata
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44775
Felix Fietkau [Sun, 15 Mar 2015 11:07:29 +0000 (11:07 +0000)]
build: use different grep strings for scanning package vs target metadata
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44774
Felix Fietkau [Sun, 15 Mar 2015 11:06:50 +0000 (11:06 +0000)]
scripts/feeds: remove a few trailing tabs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44773
Felix Fietkau [Sun, 15 Mar 2015 10:32:10 +0000 (10:32 +0000)]
uhttpd: make generating SSL keys more reliable against interrupted boots
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44772
Felix Fietkau [Sun, 15 Mar 2015 09:47:34 +0000 (09:47 +0000)]
lantiq: add a better fix to strip FCS from ethernet packets on XRX200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44771
Felix Fietkau [Sun, 15 Mar 2015 07:57:55 +0000 (07:57 +0000)]
ltq-vdsl-fw: fix md5sum for new firmware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44770
Felix Fietkau [Sun, 15 Mar 2015 07:57:51 +0000 (07:57 +0000)]
lantiq: enable atm-esi by default for xrx200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44769
Felix Fietkau [Sun, 15 Mar 2015 07:10:38 +0000 (07:10 +0000)]
ath9k: disable TPC support for now until bugs have been found and fixed
SVN-Revision: 44768
Felix Fietkau [Sun, 15 Mar 2015 06:51:45 +0000 (06:51 +0000)]
ltq-vdsl-fw: update firmware cutter URL for newer Speedport firmware (fixes #19160)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44767
John Crispin [Sun, 15 Mar 2015 06:35:18 +0000 (06:35 +0000)]
toolchain: r44701 accidentially removed the uclibc default when TOOLCHAINOPTS is set
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44766
John Crispin [Sun, 15 Mar 2015 06:35:13 +0000 (06:35 +0000)]
kernel: enable open by fhandle syscalls
This is needed by many services to function properly and as
all modern distributions got it enabled, it starts to be a
de-facto standard, i.e. user-space starts to silently depend
on it.
This also pulls in EXPORTFS, however, the kernel binary size
increases only a little.
On ARM systems comes down to 800 bytes uncompressed and about
200 bytes compressed size.
On MIPS systems it's about 1.2 kB size increase of the LZMA
compressed kernel.
v2: use menuconfig option instead of just enabling the option
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44765
Felix Fietkau [Sun, 15 Mar 2015 05:18:50 +0000 (05:18 +0000)]
brcm2708: fix mkdosfs command line options order
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44764
Felix Fietkau [Sun, 15 Mar 2015 05:18:45 +0000 (05:18 +0000)]
dosfstools: fix build on OS X
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44763
Felix Fietkau [Sun, 15 Mar 2015 05:18:40 +0000 (05:18 +0000)]
dosfstools: update to v3.0.27
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44762
Felix Fietkau [Sun, 15 Mar 2015 05:12:11 +0000 (05:12 +0000)]
scripts: fix ubinize-image on OS X
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44761
Felix Fietkau [Sun, 15 Mar 2015 05:07:10 +0000 (05:07 +0000)]
patch: bump GNU patch to 2.7.5
Bump GNU patch in tools from 2.7.1 to 2.7.5.
Change download URL to use @GNU alias.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 44760
Felix Fietkau [Sun, 15 Mar 2015 04:43:37 +0000 (04:43 +0000)]
x86: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44759
Felix Fietkau [Sun, 15 Mar 2015 04:43:30 +0000 (04:43 +0000)]
x86: update to kernel 3.18
copied target/linux/x86/config-3.14 and target/linux/x86/patches-3.14 to
3.18 equivalents and then tweaked until it built.
Tested on alix2, soekris net4826 and soekris net4521.
Still having trouble with net4826 booting from Grub, alix2 and net4521
are fine.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 44758
Felix Fietkau [Sun, 15 Mar 2015 04:43:22 +0000 (04:43 +0000)]
kernel: fix portability issues of the x86 vdso2c utility
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44757
Felix Fietkau [Sun, 15 Mar 2015 04:40:10 +0000 (04:40 +0000)]
kernel: add missing config symbol for 3.18+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44756
Rafał Miłecki [Sat, 14 Mar 2015 16:35:56 +0000 (16:35 +0000)]
bcm53xx: support NVRAM prefixes with extra / in devpath
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44755
Felix Fietkau [Sat, 14 Mar 2015 12:12:25 +0000 (12:12 +0000)]
ath9k: always select relay support, not just when debugfs is enabled - fixes an unresolved symbol error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44754
Felix Fietkau [Sat, 14 Mar 2015 08:38:35 +0000 (08:38 +0000)]
x86: disable rts/cts for serial console in grub - fixes net48xx boot issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44753
Felix Fietkau [Sat, 14 Mar 2015 08:21:02 +0000 (08:21 +0000)]
grub2: fix processing the serial rts/cts option
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44752
Felix Fietkau [Sat, 14 Mar 2015 05:38:14 +0000 (05:38 +0000)]
kernel: linux 3.19 also needs the network namespace related fd export patch (#19161)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44751
Felix Fietkau [Sat, 14 Mar 2015 02:00:50 +0000 (02:00 +0000)]
ath: fix selecting the module individually (#19162)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44750
Felix Fietkau [Sat, 14 Mar 2015 02:00:44 +0000 (02:00 +0000)]
mac80211: fix a rounding issue in minstrel MCS rate duration calculation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44749
Felix Fietkau [Sat, 14 Mar 2015 02:00:36 +0000 (02:00 +0000)]
mac80211: improve powersave handling in the tx queue rework patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44748
projects / openwrt / staging / ynezz.git / log