dt-bindings: display: add binding for Innolux ee101ia-01d panel

This is a panel handled through the generic lvds-panel binding,
so only needs its additional compatible specified.

Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113124205.29319-1-heiko@sntech.de

drm/bridge: dw-hdmi: add support for YUV420 output

In order to support the HDMI2.0 YUV420 display modes, this patch
adds support for the YUV420 TMDS Clock divided by 2 and the controller
passthrough mode.

YUV420 Synopsys PHY support will need some specific configuration table
to support theses modes.

This patch is based on work from Zheng Yang <zhengyang@rock-chips.com> in
the Rockchip Linux 4.4 BSP at [1]

[1] https://github.com/rockchip-linux/kernel/tree/release-4.4

Cc: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-5-git-send-email-narmstrong@baylibre.com

drm/meson: add support for HDMI2.0 2160p modes

Now we support the TMDS Clock > 3.4GHz and support the SCDC Control
operation in the DW-HDMI Controller, we can enable support for the
HDMI2.0 3840x2160@60/50 RGB444 display modes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-4-git-send-email-narmstrong@baylibre.com

drm/meson: add HDMI div40 TMDS mode

Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-3-git-send-email-narmstrong@baylibre.com

drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support

Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
Scrambling when supported or mandatory.

This patch also adds an helper to setup the control bit to support
the high TMDS Bit Period/TMDS Clock-Period Ratio as required with
TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes.

These changes were based on work done by Huicong Xu <xhc@rock-chips.com>
and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes
on the Rockchip 4.4 BSP kernel at [1]

[1] https://github.com/rockchip-linux/kernel/tree/release-4.4

Cc: Nickey Yang <nickey.yang@rock-chips.com>
Cc: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-2-git-send-email-narmstrong@baylibre.com

drm/TODO: Add drm_display_mode.hsync/vrefresh removal

Drivers shouldn't be using these values, add a TODO so someone removes
them.

Changes in v2:
- Add drm_display_mode.vrefresh removal (Ville)
- Add Sam's R-b and bonus points
Changes in v3:
- Add hsync removal todo item (Daniel)
- Change vrefresh wording to make removal less optional

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Bonus-points-awarded-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129192637.73296-1-sean@poorly.run

drm/dp/mst: Provide better debugs for NAK replies

Decode the NAK reply fields to make it easier to parse the logs.

v2: s/STR/DP_STR/ to avoid conflict with some header stuff (0day)
    Use drm_dp_mst_req_type_str() more (DK)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-2-ville.syrjala@linux.intel.com

drm/dp/mst: Provide defines for ACK vs. NAK reply type

Make the code a bit easier to read by providing symbolic names
for the reply_type (ACK vs. NAK). Also clean up some brace stuff
while at it.

v2: s/DP_REPLY/DP_SIDEBAND_REPLY/ (DK)
    Fix some checkpatch issues

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-1-ville.syrjala@linux.intel.com

drm/doc: Drop chapter "KMS Initialization and Cleanup"

It only talks about crtc, brings up intel as an example and I think is
more misleading than useful really. Plus we have lots of discussion
about how your standard kms driver should be initialized/cleaned up,
so maybe better to document this when we have a better idea.

v2: Fix typo in commit message (Nicholas).

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-2-daniel.vetter@ffwll.ch

drm/doc: Move hdmi infoframe docs

.. next to all the other sink helpers. The rect library is more used
for handling plane clipping, so belongs to those imo.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-1-daniel.vetter@ffwll.ch

drm/doc: Task to rename CMA helpers

I'm kinda fed up explaining why the have a confusing name :-)

v2: Fix typo that Eric Engestrom spotted.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129132153.28844-1-daniel.vetter@ffwll.ch

drm/doc: fix VRR_ENABLED casing

Yes it's inconsitent with vrr_capable, but this is the actual uapi as
exercise by igt.

Fixes: ab7a664f7a2d ("drm: Document variable refresh properties")
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-3-daniel.vetter@ffwll.ch

drm/savage: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warnings:

drivers/gpu/drm/savage/savage_state.c:301:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:438:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:559:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/savage/savage_state.c:697:8: warning: this statement may fall through [-Wimplicit-fallthrough=]

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129202005.GA25789@embeddedor

drm/via: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warnings:

drivers/gpu/drm/via/via_dmablit.c:179:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:185:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:187:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/gpu/drm/via/via_dmablit.c:195:3: warning: this statement may fall through [-Wimplicit-fallthrough=]

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129201742.GA25660@embeddedor

drm/qxl: use ttm_tt

qxl device will not dma, so we don't need ttm_dma_tt.  Go use ttm_tt
instead, to avoid wasting resources (swiotlb bounce buffers for
example).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190129082541.1392-1-kraxel@redhat.com

drm/irq: Ditch DRIVER_IRQ_SHARED

This is only used by drm_irq_install(), which is an optional helper.
For legacy pci devices this is required (due to interrupt sharing without
msi/msi-x), and just making this the default exactly matches the behaviour
of all existing drivers using the drm_irq_install() helpers. In case that
ever becomes wrong drivers can roll their own irq handling, as many
drivers already do (for other reasons like needing a threaded interrupt
handler, or having an entire pile of different interrupt sources).

v2: Rebase

v3: Improve commit message (Emil)

Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-3-daniel.vetter@ffwll.ch

drm: Switch DRIVER_ flags to an enum

And move the documenation we alreay have into kerneldoc, plus a bit of
polish while at it.

v2:
- Ditch FIXME from commit message, I've resolved that already before
  sending out the first version.
- Put the legacy DRIVER_ flags at the end (Sam).

Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-2-daniel.vetter@ffwll.ch

drm/irq: Don't check for DRIVER_HAVE_IRQ in drm_irq_(un)install

If a non-legacy driver calls these it's valid to assume there is
interrupt support. The flag is really only needed for legacy drivers,
which control IRQ enabling/disabling through the DRM_IOCTL_CONTROL
legacy IOCTL.

Also remove all the flag usage from non-legacy drivers.

v2: Review from Emil:
- improve commit message
- I forgot hibmc, fix that

Cc: linux-arm-kernel@lists.infradead.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-1-daniel.vetter@ffwll.ch

drm/<drivers>: Don't set FBINFO_(FLAG_)DEFAULT

Both macros evaluate to 0. At the same time flag is already set to
zero since the struct is kzalloc'd in framebuffer_alloc().
As called by drm_fb_helper_alloc_fbi() in the DRM drivers.

v2: Rebase and improve commit message per Emil's suggestion.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124165831.16427-27-daniel.vetter@ffwll.ch

drm/doc: Add a warning to drm_dev_is_unplugged

It's probably not what you want, definitely not after Noralf's work to
add drm_dev_enter/exit.

Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129085643.16357-1-daniel.vetter@ffwll.ch

drm/fb-helper: generic: Fix drm_fbdev_client_restore()

If fbdev setup has failed, lastclose will give a NULL pointer deref:

[   77.794295] [drm:drm_lastclose]
[   77.794414] [drm:drm_lastclose] driver lastclose completed
[   77.794660] Unable to handle kernel NULL pointer dereference at virtual address 00000014
[   77.809460] pgd = b376b71b
[   77.818275] [00000014] *pgd=175ba831, *pte=00000000, *ppte=00000000
[   77.830813] Internal error: Oops: 17 [#1] ARM
[   77.840963] Modules linked in: mi0283qt mipi_dbi tinydrm raspberrypi_hwmon gpio_backlight backlight snd_bcm2835(C) bcm2835_rng rng_core
[   77.865203] CPU: 0 PID: 527 Comm: lt-modetest Tainted: G         C        5.0.0-rc1+ #1
[   77.879525] Hardware name: BCM2835
[   77.889185] PC is at restore_fbdev_mode+0x20/0x164
[   77.900261] LR is at drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c
[   78.002446] Process lt-modetest (pid: 527, stack limit = 0x7a3d5c14)
[   78.291030] Backtrace:
[   78.300815] [<c04f2d0c>] (restore_fbdev_mode) from [<c04f4708>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c)
[   78.319095]  r9:d8a8a288 r8:d891acf0 r7:d7697910 r6:00000000 r5:d891ac00 r4:d891ac00
[   78.334432] [<c04f46b4>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c04f47e8>] (drm_fbdev_client_restore+0x18/0x20)
[   78.353296]  r8:d76978c0 r7:d7697910 r6:d7697950 r5:d7697800 r4:d891ac00 r3:c04f47d0
[   78.368689] [<c04f47d0>] (drm_fbdev_client_restore) from [<c051b6b4>] (drm_client_dev_restore+0x7c/0xc0)
[   78.385982] [<c051b638>] (drm_client_dev_restore) from [<c04f8fd0>] (drm_lastclose+0xc4/0xd4)
[   78.402332]  r8:d76978c0 r7:d7471080 r6:c0e0c088 r5:d8a85e00 r4:d7697800
[   78.416688] [<c04f8f0c>] (drm_lastclose) from [<c04f9088>] (drm_release+0xa8/0x10c)
[   78.431929]  r5:d8a85e00 r4:d7697800
[   78.442989] [<c04f8fe0>] (drm_release) from [<c02640c4>] (__fput+0x104/0x1c8)
[   78.457740]  r8:d5ccea10 r7:d96cfb10 r6:00000008 r5:d74c1b90 r4:d8a8a280
[   78.472043] [<c0263fc0>] (__fput) from [<c02641ec>] (____fput+0x18/0x1c)
[   78.486363]  r10:00000006 r9:d7722000 r8:c01011c4 r7:00000000 r6:c0ebac6c r5:d892a340
[   78.501869]  r4:d8a8a280
[   78.512002] [<c02641d4>] (____fput) from [<c013ef1c>] (task_work_run+0x98/0xac)
[   78.527186] [<c013ee84>] (task_work_run) from [<c010cc54>] (do_work_pending+0x4f8/0x570)
[   78.543238]  r7:d7722030 r6:00000004 r5:d7723fb0 r4:00000000
[   78.556825] [<c010c75c>] (do_work_pending) from [<c0101034>] (slow_work_pending+0xc/0x20)
[   78.674256] ---[ end trace 70d3a60cf739be3b ]---

Fix by using drm_fb_helper_lastclose() which checks if fbdev is in use.

Fixes: 9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125150300.33268-1-noralf@tronnes.org

drm/panel: simple: Add support for PDA 91-00156-A0 panel

PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with
backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5).

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-4-git-send-email-eugen.hristev@microchip.com

dt-bindings: display: Add support for PDA 91-00156-A0 panel

PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with
backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5).
Adding device tree bindings for this panel.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[eugen.hristev@microchip.com]: specified backlight and supply bindings
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-3-git-send-email-eugen.hristev@microchip.com

dt-bindings: Add vendor prefix for PDA Precision Design Associates, Inc.

Precision Design Associates, Inc. (PDA) manufactures standard and custom
capacitive touch screens, LCD's embedded controllers and custom embedded
software. They specialize in industrial, rugged and outdoor
applications.

Website: http://www.pdaatl.com/

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-2-git-send-email-eugen.hristev@microchip.com

drm/panel: simple: Add support for the LeMaker BL035-RGB-002 3.5" LCD

This adds support for the 3.5" LCD panel from LeMaker, sold for use with
BananaPi boards. It comes with a 24-bit RGB888 parallel interface and
requires an active-low DE signal

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-7-contact@paulk.fr

dt-bindings: display: Add bindings for the LeMaker BL035-RGB-002 LCD panel

This adds the device-tree bindings for the LeMaker BL035-RGB-002 3.5"
QVGA TFT LCD panel, compatible with simple-panel.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-6-contact@paulk.fr

dt-bindings: Add vendor prefix for LeMaker

This introduces a new device-tree binding vendor prefix for Shenzhen
LeMaker Technology Co., Ltd.

This vendor was already in use but it was not documented until now.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Rob Hering <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-5-contact@paulk.fr

drm/panel: Add Kingdisplay KD097D04 panel driver

Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI
dual-DSI panel.

v4-resend:
- Thierry noted missing dt-bindings for v4 but forgot that he
  already had applied them one kernel release back in
  https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ebc950fdff6d5f9250cd5a5a348af97f7d8508df
v4:
- address Philipp's comments
  - real range for usleep_range and
  - poweroff ordering in kingdisplay_panel_prepare
  - return value beautification in panel_probe
- update author naming for full name
v3:
- address Thierry's comments
  - error handling for init dsi writes in init
  - unconditionally remove the panel
  - don't use drm_panel_detach
  - a bit of variable signednes wiggling
- I did talk to ChromeOS people and the delays really should be as short
  as possible, so dropped the 100ms from the delay comments
v2:
- update timing + cmds from chromeos kernel
- new backlight API including switch to devm_of_find_backlight
- fix most of Sean Paul's comments
  enable/prepare tracking seems something all panels do
- document origins of the init sequence
- lanes per dsi interface to 4 (two interfaces). Matches how tegra
  and pending rockchip dual-dsi handle (dual-)dsi lanes
- spdx header instead of license boilerplate

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030091528.28211-1-heiko@sntech.de

drm/panel: Add Sitronix ST7701 panel driver

ST7701 designed for small and medium sizes of TFT LCD display, is
capable of supporting up to 480RGBX864 in resolution. It provides
several system interfaces like MIPI/RGB/SPI.

Currently added support for Techstar TS8550B which is ST7701 based
480x854, 2-lane MIPI DSI LCD panel.

Driver now registering mipi_dsi device, but indeed it can extendable
for RGB if any requirement trigger in future.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-2-jagan@amarulasolutions.com

dt-bindings: display: Add Sitronix ST7701 panel documentation

Techstar TS8550B MIPI DSI panel is 480x854, 2-lane MIPI DSI LCD panel
with inbuilt ST7701 chip.

The default regulator names in ST7701 chip is renamed in Techstar TS8550B
so, add specific binding names for them.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-1-jagan@amarulasolutions.com

drm/qxl: use kernel mode db

Add all standard modes from the kernel's video mode data base.
Keep a few non-standard modes in the qxl mode list.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-23-kraxel@redhat.com

drm/qxl: add qxl_add_mode helper function

Add a helper function to add custom video modes to a connector.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-22-kraxel@redhat.com

drm/qxl: add mode/framebuffer check functions

Add a helper functions to check video modes.  Also add a helper to check
framebuffer buffer objects, using the former for consistency.  That way
we should not fail in qxl_primary_atomic_check() because video modes
which are too big will not be added to the mode list in the first place.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-21-kraxel@redhat.com

drm/qxl: implement qxl_gem_prime_(un)pin

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-20-kraxel@redhat.com

drm/qxl: remove dead qxl fbdev emulation code

Lovely diffstat, thanks to the new generic fbdev emulation.

 drm/qxl/Makefile   |    2
 drm/qxl/qxl_draw.c |  232 ----------------------------------------
 drm/qxl/qxl_drv.h  |   21 ---
 drm/qxl/qxl_fb.c   |  300 -----------------------------------------------------

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-19-kraxel@redhat.com

drm/qxl: use generic fbdev emulation

Switch qxl over to the new generic fbdev emulation.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-18-kraxel@redhat.com

drm/qxl: implement prime kmap/kunmap

Generic fbdev emulation needs this.  Also: We must keep track of the
number of mappings now, so we don't unmap early in case two users want a
kmap of the same bo.  Add a sanity check to destroy callback to make
sure kmap/kunmap is balanced.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-17-kraxel@redhat.com

drm/qxl: use qxl_num_crtc directly

qdev->monitors_config->max_allowed is effectively set by the
qxl.num_heads module parameter, stored in the qxl_num_crtc variable.
Lets get rid of the indirection and use the variable qxl_num_crtc
directly.  The kernel doesn't need to dereference pointers each time it
needs the value, and when reading the code you don't have to trace where
and why qdev->monitors_config->max_allowed is set.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-16-kraxel@redhat.com

drm/qxl: cover all crtcs in shadow bo.

The qxl device supports only a single active framebuffer ("primary
surface" in spice terminology).  In multihead configurations are handled
by defining rectangles within the primary surface for each head/crtc.

Userspace which uses the qxl ioctl interface (xorg qxl driver) is aware
of this limitation and will setup framebuffers and crtcs accordingly.

Userspace which uses dumb framebuffers (xorg modesetting driver,
wayland) is not aware of this limitation and tries to use two
framebuffers (one for each crtc) instead.

The qxl kms driver already has the dumb bo separated from the primary
surface, by using a (shared) shadow bo as primary surface.  This is
needed to support pageflips without having to re-create the primary
surface.  The qxl driver will blit from the dumb bo to the shadow bo
instead.

So we can extend the shadow logic:  Maintain a global shadow bo (aka
primary surface), make it big enough that dumb bo's for all crtcs fit in
side-by-side.  Adjust the pageflip blits to place the heads next to each
other in the shadow.

With this patch in place multihead qxl works with wayland.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-15-kraxel@redhat.com

drm/qxl: use shadow bo directly

Pass the shadow bo to qxl_io_create_primary() instead of expecting
qxl_io_create_primary to check bo->shadow.  Set is_primary flag on the
shadow bo.  Move the is_primary tracking into qxl_io_create_primary()
and qxl_io_destroy_primary() functions.

That simplifies primary surface tracking and the workflow in
qxl_primary_atomic_update().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-14-kraxel@redhat.com
qxl_io_create/destroy_primary: primary_bo tracking [fixup]

drm/qxl: track primary bo

Track which bo is used as primary surface.  With that in place we don't
need the primary_created flag any more, we can just check the primary bo
pointer instead.

Also verify we don't already have a primary surface in
qxl_io_create_primary().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-13-kraxel@redhat.com

drm/qxl: drop unused offset parameter from qxl_io_create_primary()

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-12-kraxel@redhat.com

drm/qxl: move qxl_primary_apply_cursor to correct place

The qxl device ties the cursor to the primary surface.  Therefore
calling qxl_io_destroy_primary() and qxl_io_create_primary() to switch
the framebuffer causes the cursor information being lost and the driver
must re-apply it.

The correct call order to do that is qxl_io_destroy_primary() +
qxl_io_create_primary() + qxl_primary_apply_cursor().

The old code did qxl_io_destroy_primary() + qxl_primary_apply_cursor() +
qxl_io_create_primary().  Due to qxl_primary_apply_cursor request being
queued in a ringbuffer and qxl_io_create_primary() trapping to the
hypervisor instantly there is a high chance that qxl_io_create_primary()
is processed first even with the wrong call order.  But it's racy and
thus not reliable.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-11-kraxel@redhat.com

drm/qxl: use QXL_GEM_DOMAIN_SURFACE for dumb gem objects

dumb buffers are used as qxl surfaces, so allocate them as
QXL_GEM_DOMAIN_SURFACE.  Should usually be allocated in
PRIV ttm domain then, so this reduces VRAM memory pressure.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-10-kraxel@redhat.com

drm/qxl: use QXL_GEM_DOMAIN_SURFACE for shadow bo.

The shadow bo is used as qxl surface, so allocate it as
QXL_GEM_DOMAIN_SURFACE.  Should usually be allocated in
PRIV ttm domain then, so this reduces VRAM memory pressure.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-9-kraxel@redhat.com

drm/qxl: allow both PRIV and VRAM placement for QXL_GEM_DOMAIN_SURFACE

qxl surfaces (used for framebuffers and gem objects) can live in both
VRAM and PRIV ttm domains.  Update placement setup to include both.
Put PRIV first in the list so it is preferred, so VRAM will have more
room for objects which must be allocated there.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-8-kraxel@redhat.com

drm/qxl: use separate offset spaces for the two slots / ttm memory types.

Without that ttm offsets are not unique, they can refer to objects
in both VRAM and PRIV memory (aka main and surfaces slot).

One of those "why things didn't blow up without this" moments.
Probably offset conflicts are rare enough by pure luck.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-7-kraxel@redhat.com

drm/qxl: drop unused fields from struct qxl_device

slot_id_bits and slot_gen_bits can be read directly from qxlrom instead.
va_slot_mask is never used anywhere.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-6-kraxel@redhat.com

drm/qxl: change the way slot is detected

Instead of relaying on surface type use the actual placement.
This allow to have different placement for a single type of
surface.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-5-kraxel@redhat.com
[ kraxel: rebased, adapted to upstream changes ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/qxl: simplify slot management

Drop pointless indirection, remove the mem_slots array and index
variables, drop dynamic allocation.  Store memslots in qxl_device
instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-4-kraxel@redhat.com

drm/qxl: drop unused qxl_fb_virtual_address

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-3-kraxel@redhat.com

drm/qxl: drop ttm_mem_reg arg from qxl_hw_surface_alloc()

Not used, is always NULL.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190118122020.27596-2-kraxel@redhat.com

drm/rockchip: fix for mailbox read validation.

This is basically the same fix as in
commit fa68d4f8476b ("drm/rockchip: fix for mailbox read size")
but for cdn_dp_mailbox_validate_receive function.

See patchwork.kernel.org/patch/10671981/ for details.

Signed-off-by: Damian Kos <dkos@cadence.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1542640463-18332-1-git-send-email-dkos@cadence.com

drm/rockchip: check yuv2yuv existence before assigning window data

Before assigning window data, we should check if the yuv2yuv vop-data
is set at all, because it looks like it can otherwise reference something
wrong, as I saw on my rk3188 today which ended up in a null pointer
dereference in vop_plane_atomic_update when accessing the yuv2yuv data.

Fixes: 1c21aa8f2b68 ("drm/rockchip: Fix YUV buffers color rendering")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2556882.Heuq80WCVD@phil

drm/atmel-hlcdc: fix clipping of planes

With the help from drm_atomic_helper_check_plane_state function, clipping
now handles planes to be partially or totally off-screen. The plane is
disabled if it is not visible.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-4-peda@axentia.se

drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated

The destination crtc rectangle is independent of source plane rotation.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-3-peda@axentia.se

drm/atmel-hlcdc: rotate planes counterclockwise

Ouch, the driver rotates planes clockwise, which is simply not correct.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-2-peda@axentia.se

video/hdmi: Add an enum for HDMI packet types

We'll be wanting to send more than just infoframes over HDMI. So add an
enum for other packet types.

TODO: Maybe just include the infoframe types in the packet type enum
      and get rid of the infoframe type enum?

v2: s/AUDIO_CP/ACP/ (Shashank)

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110211445.24177-2-ville.syrjala@linux.intel.com

drm/sun4i: Add support for A23 display pipeline

The A23's display pipeline is similar to the A33. Differences include:

  - Display backend supports larger layers, 8192x8192 instead of 2048x2048

  - TCON has DMA input

  - There is no SAT module packed in the display backend

Add support for the display pipeline and its components.

As the MIPI DSI output device is not officially documented, and there
are no A23 reference devices to test it, it is not covered by this
patch.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-7-wens@csie.org

drm/sun4i: layer: support just backend formats when frontend is unavailable

In some cases, such as running a new kernel with an old device tree that
has the frontend disabled, the backend's matching frontend might be
unavailable.

When this happens, the layers should only declare support for formats
that the backend support. This partially reverts commit 1c29d263f624
("drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formats")
by bringing back sun4i_backend_layer_formats, and passing it to
drm_universal_plane_init, while also dropping the modifiers list,
in the event no frontend is available.

Fixes: b636d3f97d04 ("drm/sun4i: frontend: Add support for the BGRX8888 input format")
Fixes: 9afe52d54bb0 ("drm/sun4i: frontend: Add support for semi-planar YUV input formats")
Fixes: 8c8152bf4db6 ("drm/sun4i: frontend: Add support for planar YUV input formats")
Fixes: b2ddf277ab5e ("drm/sun4i: layer: Add tiled modifier support and helper")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-6-wens@csie.org

drm/sun4i: layer: Assign backend pointer before calling DRM helpers

We might want to use the backend pointer from DRM callbacks that get
called within drm_universal_plane_init(), such as the
.format_mod_supported callback.

Move the assignment of the layer's backend pointer to right after the
structure is allocated.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-5-wens@csie.org

drm/sun4i: backend: Remove BGRX8888 from list of supported formats

The display backend does not support BGRX8888. There is also no trace
of this in the original list of supported formats before the commit
b636d3f97d04 ("drm/sun4i: frontend: Add support for the BGRX8888 input
format"). Nor do the backend configuration helpers handle this format.

Remove BGRX8888 from list of supported formats by the backend.

Fixes: 3d4265f89d06 ("drm/sun4i: backend: Add a helper and a list for supported formats")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-4-wens@csie.org

dt-bindings: display: sun4i-drm: Add compatible strings for A23 display

The A23's display pipeline is similar to the A33. Differences include:

  - Display backend supports larger layers, 8192x8192 instead of 2048x2048

  - TCON has DMA input

  - There is no SAT module packed in the display backend

Add compatible strings for the display pipeline and its components.

As the MIPI DSI output device is not officially documented, and there
are no A23 reference devices to test it, it is not covered by this
patch.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-3-wens@csie.org

drm: Split out drm_probe_helper.h

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
  other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

drmi/rcar-du: prepare for drmP.h removal from drm_modeset_helper.h

The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused rcar-du to fail to build.

This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.

Build tested on arm x86 and arm allmodconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-6-sam@ravnborg.org

drm/bridge: cdns: prepare for drmP.h removal from drm_modeset_helper.h

The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused cdns to fail to build.

This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.

Build tested on arm x86 and arm allmodconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-5-sam@ravnborg.org

drm/arcpgu: prepare for drmP.h removal from drm_modeset_helper.h

The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused arcgpu to fail to build.

This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
List of include files sorted alphabetically.

Build tested on arm x86 and arm allmodconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-4-sam@ravnborg.org

drm/hisilicon/kirin: prepare for drmP.h removal from drm_modeset_helper.h

The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused kirin to fail to build.

This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
List of include files sorted alphabetically.

Build tested on arm x86 allmodconfig using the following hack
to the Kconfig file:

| -       depends on DRM && OF && ARM64
| +       depends on DRM && OF && (ARM64 || (X86_64 && COMPILE_TEST))

Build failed on 32bit ARM - so the X86_64 hack was required.
The COMPILE_TEST hack is not submitted as the preferred fix
is something where we have coverage on 32bit ARM too.

v2:
- Sort list of include files

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-3-sam@ravnborg.org

drm/stm: prepare for drmP.h removal from drm_modeset_helper.h

The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused drm/stm to fail to build.

This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.

Build tested on arm and x86 allmodconfig

v2:
- sort list of include files

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-2-sam@ravnborg.org

Merge drm/drm-next into drm-misc-next

danvet needs a backmerge to ease the upcoming drmP.h rework

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

drm/vkms: Fix flush_work() without INIT_WORK().

syzbot is hitting a lockdep warning [1] because flush_work() is called
without INIT_WORK() after kzalloc() at vkms_atomic_crtc_reset().

Commit 6c234fe37c57627a ("drm/vkms: Implement CRC debugfs API") added
INIT_WORK() to only vkms_atomic_crtc_duplicate_state() side. Assuming
that lifecycle of crc_work is appropriately managed, fix this problem
by adding INIT_WORK() to vkms_atomic_crtc_reset() side.

[1] https://syzkaller.appspot.com/bug?id=a5954455fcfa51c29ca2ab55b203076337e1c770

Reported-and-tested-by: syzbot <syzbot+12f1b031b6da017e34f8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1547829823-9877-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp

Merge tag 'drm-intel-next-2019-01-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Unwind failure on pinning the gen7 PPGTT (Chris)
- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST
# gpg:                using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA

# Conflicts:
# drivers/gpu/drm/i915/intel_dp.c
# drivers/gpu/drm/i915/intel_drv.h
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com

drm/panel: panel-innolux: set display off in innolux_panel_unprepare

Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable()
to innolux_panel_unprepare(), so they are consistent with
innolux_panel_enable() and innolux_panel_prepare().

This also fixes some mode check and irq timeout issue in MTK dsi code.

Since some dsi code (e.g. mtk_dsi) have following call trace:
1. drm_panel_disable(), which calls innolux_panel_disable()
2. switch to cmd mode
3. drm_panel_unprepare(), which calls innolux_panel_unprepare()

However, mtk_dsi needs to be in cmd mode to be able to send commands
(e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()),
so we need these functions to be called after the switch to cmd mode happens,
i.e. in innolux_panel_unprepare.

Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org

drm/dp: Implement I2C_M_STOP for i2c-over-aux

Consult the I2C_M_STOP flag to determine whether to set the MOT bit or
not. Makes it possible to send multiple messages in one go with
stop+start generated between the messages (as opposed nothing or
repstart depending on whether thr address/rw changed).

Not sure anyone has actual use for this but figured I'd handle it
since I started to look at that flag for MST remote i2c xfers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-3-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/dp: use DRM_DEBUG_DP() instead of drm_dbg for logging

We have a wrapper for a reason.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121112758.10978-1-jani.nikula@intel.com

drm: fix drm_can_sleep() comment

Reversed logic when writing the original comment, now fixed.

Fixes: e9eafcb58921 ("drm: move drm_can_sleep() to drm_util.h")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190120171217.12508-1-sam@ravnborg.org

drm/stm: ltdc: remove set but not used variable 'src_h'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/stm/ltdc.c: In function 'ltdc_plane_atomic_check':
drivers/gpu/drm/stm/ltdc.c:694:13: warning:
 variable 'src_y' set but not used [-Wunused-but-set-variable]
  u32 src_x, src_y, src_w, src_h;
             ^
             ^
drivers/gpu/drm/stm/ltdc.c:694:6: warning:
 variable 'src_x' set but not used [-Wunused-but-set-variable]
  u32 src_x, src_y, src_w, src_h;
      ^

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538131180-34108-1-git-send-email-yuehaibing@huawei.com

drm/sun4i: frontend: Hook-in support for the A20

This adds the appropriate device-tree compatible for hooking frontend
support for the A20. Since the hardware is very similar to the A10, it
shares the same quirks (which were already introduced).

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-24-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Hook-in support for the A10, with specific quirks

This adds the appropriate device-tree compatible and quirk data for
hooking frontend support for the A20. It supports the FIR coefficients
ready bit but not the access control bit. It also takes different phase
values than the A33 for these coefficients.

The compatible is already used in the A10 device-tree and already
documented in the device-tree bindings.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-23-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Move the FIR filter phases to our quirks

The FIR filters phase depend on the SoC, so let's move it to our quirks
structure instead of removing them.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-22-paul.kocialkowski@bootlin.com

drm/sun4i: Make COEF_RDY conditional

The COEF_RDY bit isn't found in all the SoCs featuring some variant of the
frontend.

Add it to our quirks structure.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-21-paul.kocialkowski@bootlin.com

drm/sun4i: Set the coef_rdy bit right after the coef have been set

The COEF_RDY bit is used to tell the hardware that new FIR filters
coefficients have been written to the registers and that the hardware
should take them into account starting next frame.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-20-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add a quirk structure

The ACCESS_CTRL bit is not found on all the variants of the frontend, so
let's introduce a structure that will hold whether or not we need to set
it, and associate it with the compatible.

This will be extended for further similar quirks later on.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-19-paul.kocialkowski@bootlin.com

drm/sun4i: Move access control before setting the register as documented

Unlike what is currently being done, the ACCESS_CTRL bit documentation asks
that this bit should be set before modifying any register. The code in the
BSP also does this, so make sure we do this as well.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-18-paul.kocialkowski@bootlin.com

drm/sun4i: drv: Allow framebuffer modifiers in mode config

This is the final step to indicate to the core that our driver
supports framebuffer modifiers.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-17-paul.kocialkowski@bootlin.com

drm/sun4i: layer: Add tiled modifier support and helper

This introduces a list of supported modifiers for the driver, that
includes the Allwinner tiled modifier, as well as a format_mod_supported
callback.

The callback uses both the backend and frontend helpers to indicate
per-format modifier support (including for the linear modifier).

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-16-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add and use helper for checking tiling support

This introduces a helper to check whether a frontend input format
supports tiling mode. This helper is used when tiling is requested in
the frontend format support helper.

Only semiplanar and planar YUV formats are supported by the hardware.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-15-paul.kocialkowski@bootlin.com

drm/sun4i: Add buffer stride and offset configuration for tiling mode

This introduces stride and offset configuration for the VPU tiling mode.
Stride is calculated differently than it is for linear formats and an
offset is calculated, for which new register definitions are introduced.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-14-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add support for tiled YUV input mode configuration

This introduces the data input mode definitions for the tiled YUV mode,
that are used in the input mode helper if tiling is requested.

The modifier is passed to the helper from the framebuffer to determine
if tiling is requested.

Only semiplanar and planar YUV formats are supported for tiling mode.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-13-paul.kocialkowski@bootlin.com

drm/fourcc: Add definitions for Allwinner vendor and VPU tiled format

This introduces specific definitions for vendor Allwinner and its
associated tiled format modifier. This modifier is used for the output
format of the VPU, that can be imported directly with the display
engine hardware supported by the sun4i-drm driver.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-12-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add support for planar YUV input formats

Planar YUV formats come with 3 distinct planes, which requires
configuring the frontend line stride and address registers for the
third plane.

Our hardware only supports the YUV planes order and in order to support
formats with a YVU plane order, a helper is introduced to indicate
whether to invert the address of the two chroma planes.

Missing definitions for YUV411 and YUV444 input format configuration are
also introduced as support is added for these formats. For the input
sequence part, no configuration is required for planar YUV formats so
zero is returned in that case.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-11-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add support for semi-planar YUV input formats

Semi-planar YUV formats use two distinct planes, one for luminance and
one for chrominance. To add support for them, we need to configure the
second line stride and buffer address registers to setup the second YUV
plane.

New definitions are introduced to configure the input format register
for the YUV420 and YUV422 semi-planar formats.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-10-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Add support for packed YUV422 input formats

This introduces support for packed YUV formats with 4:2:2 sampling using
the frontend. Definitions are introduced for the data format and pixel
sequence input format register values.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-9-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Configure and enable YUV to RGB CSC when needed

In prevision of adding support for YUV formats, set the YUV to RGB
colorspace conversion coefficients if required and don't bypass the
CSC engine when converting.

The BT601 coefficients from the A33 BSP are copied over from the backend
code. Because of module inter-dependency, we can't have the frontend use
these coefficients from the backend directly.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-8-paul.kocialkowski@bootlin.com

drm/sun4i: Move the BT.601 CSC coefficients to the frontend

Both the backend and the frontend need the BT.601 CSC coefficients for
YUV to RGB conversion. Since the backend has a dependency on the
frontend (and not the other way round), move the coefficients there
so that both can access them without having to duplicate them.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-7-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Determine input format based on colorspace

Since all the RGB input formats have the same value for the DATA_FMT
field of the INPUT_FMT register, we can group them when the format is
known to be RGB. Here, we assume that a non-YUV format is RGB, because
the hardware does not support any other colorspace than RGB and YUV.

Use the DRM format info structure to check whether the format uses a
YUV colorspace.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-6-paul.kocialkowski@bootlin.com

drm/sun4i: frontend: Pass DRM format info to input format helpers

The helper returning the input mode needs to know the number of planes
for the provided format. Passing the fourcc requires iterating through
the format info list in order to return the number of planes.

Pass the DRM format info structure directly instead to all helpers
related to configuring the input format, since it's available to the
caller. Also rename the input format in the caller function to keep
things consistent.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-5-paul.kocialkowski@bootlin.com

drm/sun4i: backend: Use explicit fourcc helpers for packed YUV422 check

Checking for the number of planes is not sufficient to en ensure that
the format is a packed YUV422.

Use explicit fourcc helpers for the check instead.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-4-paul.kocialkowski@bootlin.com

drm/fourcc: Add format info helpers for checking YUV sub-sampling

Display engine drivers often need to distinguish between different types of
YUV sub-sampling. This introduces helpers to check for common sub-sampling
ratios in their commonly-used denomination from the DRM format info.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-3-paul.kocialkowski@bootlin.com

drm/fourcc: Add format info helpers for checking YUV planes disposition

It is often useful to check whether the DRM format info retrieved from
the DRM framebuffer matches a specific YUV planes disposition.

This introduces helpers to quickly check that a provided format info
matches a YUV format with a specific disposition, in commonly-used
terminology.

The intent of providing helpers taking the format info instead of the
fourcc alone is to avoid the overhead of iterating through all formats
when the whole format info structure is available. As a result, these
helpers are very simple so they are made inline.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-2-paul.kocialkowski@bootlin.com